VSC1303 Occupancy/Vacancy Sensor ID Label/Location Info Label Material Ideal Industries, Inc.

Ideal Industries, Inc. Occupancy/Vacancy Sensor

Alternate Views: PDF [Zoom] Download [PDF]

Durable Form                                                                                                   Page 1 of 7



DURABLE PORTFOLIO


                                                                                                Product Data Sheet
Fasson® 2 Mil White Polyester                                                                        Spec#: 76656
TC/S8015/50#SCK

Facestock                            Facestock physical properties
2 Mil White Polyester TC is a                                        Imperial Value    Units    Metric Value      Units
homogeneously pigmented
                                     Caliper:                            0.0020       inches       50.80         micron
white facestock featuring
                                     ASTM D1000
excellent tear strength, heat
resistance, dimensional stability,   Tensile:                   MD       21,300         PSI        1,497         kg/cm2
opacity, and chemical                ASTM D882
resistance.                                                     CD       28,400         PSI        1,997         kg/cm2


Adhesive                             Adhesive physical properties
S8015 adhesive is a high                                 Imperial Value Units                   Metric Value      Units
strength clear adhesive              Type:               Solvent Acrylic
featuring high initial tack,         Caliper:                0.0010      inches                    25.40         micron
adhesion and shear. Offers           ASTM D1000
strong permanent bonding to a        Standard Coat Wt:                                               32          g/sq m
wide variety of substrates
including high surface energy        Minimum Appl Temp:         45          F                         7             C
(HSE), low surface energy            Service Temp    Min       -30          F                       -34             C
(LSE) and powder coat                Range:          Max       300          F                       149             C
substrates. Excellent chemical       Loop Tack Stainless      96.0        oz/in                    105.6        N/100mm
and UV resistance.                   Steel: PSTC11

Liner                                Liner physical properties
50#SCK is a bleached, super-                                         Imperial Value Units       Metric Value      Units
calendered paper stock with          Caliper:                           0.0032      inches        81.2800        microns
very good diecutting and matrix      ASTM D1000
stripping properties. Suitable for   Basis Wt: TAPPI                     53.9         lb/ream       86.2         g/sq m
back-printing with standard inks.    T410
                                     * (24" x 36" 500 sheets)
                                     Tensile:                   MD       48.0         lb/inch      211.2        N/25 mm
                                     ASTM D882                  CD       26.0         lb/inch      114.4        N/25 mm
                                     Tear:                      MD        1.8         ounces        51.1         grams
                                     TAPPI T414                 CD        2.0         ounces        56.8         grams

Liner Release:                                           Total Construction Caliper
        o
TMLI 90 removal of Liner from Facestock.                 (approximate):
  Rate of Removal          Grams/2" Width
   400 inches/min.               60                      0.0060 inches




http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F...                            1/29/2014


Durable Form                                                                                           Page 2 of 7




DURABLE PORTFOLIO


                                                                                           Product Data Sheet


Features and Benefits

    z   Opaque white facestock with very good hiding power and physical strength
    z   Glossy clear top coat that accepts most flexographic, letterpress, and rotary screen inks
    z   Excellent thermal transfer printability with most wax/resin and resin ribbons
    z   Topcoat and adhesive have excellent chemical resistance



Applications and Uses
This product is suitable for wide variety of durable labeling applications such as:

    z   Product identification labels
    z   Barcodes and rating plates
    z   Work in progress labels (WIP)
    z   Property identifcation and asset tags
    z   Durable goods labeling
    z   Automotive exterior or underhood labels. Meets GM6121M Type A & B; Daimler Chrysler MS-CG121 Type
        A, B, & D; Ford WSS-M99P34 Types A, A2, A3, & A4
    z   UL Rating plates. This product is UL and UL-c recognized for indoor and outdoor use (see appendix). For
        specific information, see UL file # MH17205 for conditions of recognitions


Printing and Converting
The topcoat is designed for printing by flexography with most solvent and some water based inks. Specially
formulated inks are normally not needed, however, testing is recommend prior to final ink selection. Suitable for
thermal transfer printing applications with select ribbons and printer models. This product can be diecut and
stripped at high speeds on standard web-fed presses. Sample labels in a variety of shapes have been
successfully dispensed and applied with standard labeling systems.

RoHS/Regulation 2002/95/EU
The substances listed in article 4 lid 1 of 2002/95/EU (RoHS) are not intentionally used in this product. The
concentration limits of these substances will not exceed the set maximum concentration limits as provided in the
proposed amendment for 2002/95/EU.

Shelf Life
Unless specified otherwise in this document, one year when stored at 72°F at 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or
typical only and should not be used for specifications purposes. This product should be tested thoroughly under
end-use conditions to ensure it meets the requirements of the specific application.




http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F...                    1/29/2014


Durable Form                                                                                         Page 3 of 7




DURABLE PORTFOLIO


                                                                                         Product Data Sheet
Appendix
Performance Data:
The following technical data should be considered representative or typical only and should not be used for
specification purposes.


                             Initial         72 Hours at Room       72 Hours at 1200F       96 Hours at 1500F
                        (15 minute dwell)      Temperature
                                                                                                  (650C) &
                                                                                               80% Relative
                                                                                                 Humidity
Surface                  oz/in N/100mm       oz/in        N/100mm   oz/in    N/100mm        oz/in     N/100mm
1. Stainless Steel       82.1    90.3        73.7           81.1    77.4       85.1         83.7         92.1

2. Aluminum              83.7       92.1     54.8           60.3     60.5       66.6        81.1          89.2

3. Polypropylene         52.2       57.4     23.9           26.3     65.4       71.9        59.2          65.1

4. HDPE                  43.2       47.5     40.4           44.4     41.7       45.9        46.4          51

5. LDPE                  42.1       46.3     74.5           82       21.4       23.5         2.2          2.4

6. ABS Plastic            73        80.3     82.4           90.6     78.5       86.4        23.2          25.5

Environmental Performance: Chemical Resistance test results
The performance results are based on 4 hour immersions at room temperature unless otherwise noted (gasoline
is 1 hour). Samples were applied to stainless steel panels and conditioned for 24 hours before immersion and
evaluated immediately upon removal. Adhesion measured at 180° peel.


                               Adhesion to Stainless Steel             Visual                     Edge
Chemical                        oz/in          N/100mm               Appearance              Penetration mm
1. 70% IPA                       73.4             80.7               No Change                      0

2. Tide® Detergent               58.5                64.4             No Change                      0

3. Engine Oil (10W30)            62.5                68.8             No Change                      0

4. Water                         66.7                73.4             No Change                      0

5. Ammonia - pH 11               27.3                30               No Change                      0

6. 409® Cleaner                  28.9                31.8             No Change                      0

7. Toluene                       17.8                19.6             No Change                     8.9

8. Brake Fluid                   68.3                75.1             No Change                      0

9. Reference Fuel C              35.2                38.7             No Change                     6.4

10. Kerosene K1                  46.2                50.8             No Change                     3.3




http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F...                     1/29/2014


Durable Form                                                                           Page 4 of 7



11. Heptane                  12.9           14.2             No Change             3.6




Compliance Recognition: UL, C-U

               Underwriters Laboratories, Inc.
                              Minimum Temperature     Maximum Temperature
Substrates                      o
                                    F        o
                                                 C       o
                                                         F               o
                                                                          C     (I=Indoor Only
                                                                                 I/O=Indoor &
                                                                                   Outdoor)
1. Stainless Steel              -40         -40         302              150          I/O

2. Galvanized Steel             -40         -40         302              150           I/O

3. Polyurethane Powder          -40         -40         302              150           I/O
Paint
                                -40         -40         302              150           I/O
4. Epoxy Paint
                                -40         -40         302              150           I/O
5. Porcelain
                                -40         -40         302              150           I/O
6. Alkyd Enamel
                                -40         -40         302              150           I/O
7. Aluminum
                                -9          -23         302              150           I/O
8. Unsat Thermoset
Polyester                       -9          -23         302              150           I/O

9. Epoxy PCP*                   -40         -40         302              150           I/O

10. Polyester Powder Paint      -9          -23         302              150           I/O

11. Polyester Paint             -40         -40         302              150           I/O

12. Acrylic Powder Paint        -9          -23         302              150           I/O

13. Acrylic Paint               -40         -40         212              100           I/O

14. Phenolic                    -9          -23         212              100           I/O

15. Polycarbonate               -40         -40         176              80            I/O

16. Nylon                       -40         -40         176              80            I/O

17. Polyphenylene Oxide         -9          -23         140              60            I/O

18. ABS Plastic                 -9          -23         104              40            I/O

19. Polystyrene                                         104              40             I

20. Polypropylene                                       104              40             I

21. Polyethylene

22. and others

23. *PCP=Powder Coat




http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F...    1/29/2014


Durable Form                                                                                        Page 5 of 7



Paint

Recognized Ribbons: Armor "AXR8", Armor "AXR600", Astro Med Inc "R-5", Astro Med "RF", Astro Med "RY",
                    Coding Prds "5940", Dai Nippon "R-300", Dai Nippon "R-510", Iimak "SP-410", Iimak "SP-
                    330", Iimak "Primemark", Intermec "TMX 1500", Intermec "TMX 3200", ITW "R-91, ITW
                    "B324", Japan Pulp & Paper "Resin 1", Japan Pulp & Paper "Sigma P", Kurz "K300", Kurz
                    "K500", Kurz "K501", Mid City Columbia "CGL-80HE", Mid City Columbia "MCC-23HE",
                    NCR "Promark 3", NCR "Perma Max", NCR "K3", Ricoh "B110C", Ricoh "B110CX", Ricoh
                    "B110CR", Ricoh "120EC", Sato Corp. "Premier 1", Sony "TR4070", Sony "TR4075", Sony
                    "TR5070", Sony "TR6070", Sony "TR6075", Sony "Signature Series Resin", Union
                    Chemicar "US300", Zebra "5095", Zebra "5100", Zebra "5175", Zebra "5463", Zebra
                    "5555", Zebra "Z-4100", and others.




          Tested by Underwriters Laboratories, Inc.
to meet the requirements of the Canadian Standards Association for
labeling materials
                               Minimum Temperature             Maximum Temperature
Substrates                        o
                                   F              o
                                                   C              o
                                                                      F          o
                                                                                   C          (I=Indoor Only
                                                                                               I/O=Indoor &
                                                                                                 Outdoor)
1. Metals                         -40             -40            302             150                I/O

2. Electrostatic Paints           -40             -40            302             150                I/O

3. Plastics Group I               -40             -40            212             100                I/O

4. Plastics Group II              -40             -40            176              80                I/O

5. Plastics Group III             -40             -40            176              80                I/O

6. Plastics Group IV              -40             -40            176              80                I/O

7. Plastics Group V               -40             -40            176              80                I/O

8. Plastics Group VI              -40             -40            176              80                I/O

9. Plastics Group VII             -40             -40            176              80                I/O

10. Plastics Group VIII           -40             -40            176              80                I/O

Recognized Ribbons: Armor "AXR7+", Armor "AXR8", Armor "AXR600", Astro Med "RY", Dai Nippon "R-300",
                    Dai Nippon "R-510", Japan Pulp & Paper "Resin 1", Kurz "K500", Mid City Columbia
                    "CGL-80HE", Mid City Columbia "MCC-23HE", NCR "Promark 3", Ricoh "B110C", Ricoh
                    "B110CR", Sato Corp. "Premier 1", Sony "TR4070", Sony "TR5070", Sony "TR6070",
                    Sony "TR6075", Sony "Signature Series Resin", Union Chemicar "US300", Zebra "5100",
                    and others.


409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above
represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates,
and printing products may be recognized with this material. Please consult the specific compliance organization




http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F...                 1/29/2014


Durable Form                                                                           Page 6 of 7



records or specific files for a complete listing.




http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F...    1/29/2014


Durable Form                                                                                                                           Page 7 of 7



Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at
www.na.fasson.com. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer
communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.




 label.averydennison.com               Label and Packaging Materials-North America
                                                   8080 Norton Parkway
                                                    Mentor, OH 44060
                                                      800-944-8511




http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F...                                                    1/29/2014



Document Created: 2014-02-04 09:45:43
Document Modified: 2014-02-04 09:45:43
Download: VSC1303 Occupancy/Vacancy Sensor ID Label/Location Info Label Material Ideal Industries, Inc.
Mirror Download [FCC.gov]VSC1303 Occupancy/Vacancy Sensor ID Label/Location Info Label Material Ideal Industries, Inc.
Document ID4181064
Application IDgxZmm21y3BDqoIglhte02g==
Document DescriptionLabel Material.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeID Label/Location Info
Display FormatAdobe Acrobat PDF - pdf
Filesize30.35kB (379347 bits)
Date Submitted2019-02-26 00:00:00
Date Available2019-02-27 00:00:00
Creation Date2014-01-29 14:05:53
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2014-02-04 09:45:43
Document TitleLabel Material
Document CreatorPScript5.dll Version 5.2.2
Document Author: mwebb