HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual Beijing Noitom Technology .

Beijing Noitom Technology . Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01

Page 1 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 2 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 3 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 4 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 5 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 6 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 7 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 8 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 9 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 10 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 11 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 12 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 13 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 14 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 15 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 16 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 17 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 18 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 19 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 20 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 21 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Page 22 of HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .

Noitom Hi5 VR Glove
User Guidelines
Ver. 1.3
Version Control
Version Number
Version Date
1.0
2017.4
1.1
2017.09.12
Version Reason
Initial version
1. RF performance revised;
2. Mounting optical tracking
device revised;
3. Wearing glove revised;
4. Calibration motions and steps
revised.
1.2
2017.11.22
1. RF performance for multiple
user revised;
2. Vibration meaning changed;
3. Battery life extended.
1.3
2018.2.1
1. Add FCC statement
Contents
1. Introduction .................................................................................................. 1
2. Hardware Parts ............................................................................................ 2
2.1 Components ........................................................................................................... 2
2.2 Interaction Interfaces .............................................................................................. 3
2.3 Features.................................................................................................................. 4
2.4 Radio Frequency (RF) ............................................................................................ 4
2.5 Usages.................................................................................................................... 5
2.5.1 Basic Operation Steps ................................................................................... 5
2.5.2 Pairing Gloves ................................................................................................ 6
2.5.3 Demagnetization ............................................................................................ 7
3. Mechanical Parts ......................................................................................... 9
3.1 Mounting Optical Tracking Devices ........................................................................ 9
3.2 Wearing Gloves .................................................................................................... 12
4. SDK ........................................................................................................... 14
5. Calibration Instructions .............................................................................. 15
5.1 Notice.................................................................................................................... 15
5.2 Calibration Steps .................................................................................................. 15
Hi5 VR Glove
Developer Guidelines
NOITOM corporation
Dec.2017 V1.2
1. Introduction
This document describes the development guidelines for content developers. It contains
information on how to use the Noitom Hi5 VR Glove to enable motion capture tracking of
the user’s hands and fingers.
Notice:
1. Noitom Hi5 is provided as a pair. You may use them with both hands or with just one
hand and one Glove.
2. It’s needed to use Noitom Hi5 together with optical tracking devices in order to gain
the absolute position of your hands and forearms in a tracked area and do calibration
correctly.
3. Noitom Hi5 Glove can be used on win7/8/10.
4. Currently both VIVE tracker and controller are supported as optical tracking devices
for Hi5 and mounted on Hi5 gloves.
5. You are suggested NOT to hold VIVE controller or any other magnetic or ferrous
objects in hand when wearing Hi5 glove, since it will influence the motion capture
performance.
Basic using steps (for reference):
Set VIVE ready
Mount VIVE trackers
onto Hi5 gloves
Turn on trackers, and
pair them to steam
Open Hi5 calibration
sample (Unity/Unreal)
Turn on Hi5 gloves, and
they’ll connect to dongle
automatically
Plug Hi5 dongle into
HMD/PC
Calibration
Put on Hi5 gloves
Hi5 VR Glove Developer Guidelines
Put on HMD
Demagnetization
(follow Hi5 calibration
sample instruction)
Hi5 VR Glove
Developer Guidelines
NOITOM corporation
Dec.2017 V1.2
2. Hardware Parts
2.1 Components
Noitom Hi5 comes packaged with 1 pair of Hi5 Gloves (“Glove”) and 1 USB 2.0
transceiver (“Dongle”):
( Figure 2.1-1 )
Sensors
USB connector
Mounting surface
(bolt and stabilizing pin)
AA battery cover
Button
Indicator light
Button
Indicator light
( Figure 2.1-2 )
Hi5 VR Glove Developer Guidelines
Hi5 VR Glove
Developer Guidelines
NOITOM corporation
Dec.2017 V1.2
2.2 Interaction Interfaces
There is one button and one indicator light for each Glove and each Dongle. The
interaction lookup table is as follows:
Button Functions:
Function
Turning on the Glove
Operation and Indication
Press the button when the Glove is
On Glove/Dongle
Glove
powered off (click)
Turning off the Glove
Press and hold the button for 5
Glove
seconds (release after the indicator
light turns off)
Entering pairing mode
Press and hold the buttons for 3
Glove & Dongle
seconds (release when the indicator
lights turn on to a solid state)
Manually switching working
Short press the button (click)
Dongle
Short press the button (click)
Glove
frequency
Triggering button event
( Table 2.2-1 )
Indicator Light States:
Meaning
Indicator Light State
On Glove/Dongle
Powered off
Turned off
Glove
Standby
Breathing
Glove & Dongle
Pairing mode
1Hz flashing (slowly flashing)
Glove & Dongle
Working mode
20Hz flashing (rapid flashing)
Glove & Dongle
The current ambient
Solid state turned on (in working
Glove
environment has magnetic
mode)
interference
Error 01
Solid state turned on (right after
(Self-test error)
power on)
Error 02
3s off, 0.1s on
Glove & Dongle
Glove & Dongle
(enter Boot mode)
( Table 2.2-2 )
Notice:The indicator light on the Gloves will turn RED when the battery power is low.
Hi5 VR Glove Developer Guidelines
Hi5 VR Glove
Developer Guidelines
NOITOM corporation
Dec.2017 V1.2
Vibration States:
Meaning
States
On Glove/Dongle
Glove power on
Vibrate for 0.5s
Glove
( Table 2.2-2 )
2.3 Features

9-DOF IMU for 5 fingers and the back of hand

Vibration feedback for each Glove

Supply voltage range of 1.0-1.5VDC with one AA battery for each Glove

Supply voltage range of 5±0.25VDC for Dongle

7 hours of working time with 2100mAh Alkaline battery

Latency less than 5 ms (From motion to SDK, under clean RF condition)

Output date rate up to 180Hz

RF working area: 5m×5m (open area without interference)

automatic channel-switching to avoid RF interference
2.4 Radio Frequency (RF)
1. Working frequency range: 2400MHz~2483.5MHz
2. Restricted Area of Antenna
The figure below illustrates the “keep out” area where only nonmetallic parts of the accessory
should be inside (spherical radius=20mm and the center is antenna feed point).
( Figure 2.4-1: Restricted Area of Antenna )
Hi5 VR Glove Developer Guidelines
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
3. Support up to 6 sets of Hi5 working in the same field simultaneously (in different
working frequency; clean RF environment required).
Notice:

Making the antenna side of Dongle points to the Gloves can get better RF
performance (keep the Dongle at the same height as the Glove);

Setting the wireless card of laptop to flight mode can get better RF performance;

You can switch the working frequency manually (click the button of Dongle) when the
RF performance is bad (lagging hands in HMD).
2.5 Usages
2.5.1 Basic Operation Steps
Step 1: Preparing
A. Install AA Batteries into Gloves.
B. Mount optical tracking devices to Gloves (see “3.1 Mounting Optical Tracking Devices”).
Step 2: Plugging in the Dongle
Plug the Dongle into PC. The indicator light of Dongle will start to breathe.
If possible, please plug the Dongle directly into the USB port on the VIVE headset using a USB
extender (not provided) to get the best RF performance with the Hi5 Gloves.
Step 3: Starting the Gloves
Turn on the Gloves (press the button on the Gloves), and the indicator light will start to breathe.
Then normally the Gloves should connect to Dongle automatically, and the indicator light of both
Gloves and Dongle will turn to rapid flashing immediately (then skip Step 4). However, if the
indicator light keeps breathe, please do Step 4.
Reminder: If you use optical tracking devices (such as VIVE Tracker) on Hi5, please do not forget
to start them to get the positions of your hands.
Step 4 (Optional): Pairing Gloves with Dongle
(see “2.5.2 Pairing Gloves”)
Step 5: Wearing Gloves
A. (Suggested) Wearing inner plastic gloves before putting on the Hi5 Gloves
B. Wearing Hi5 Gloves (see “3.2 Wearing Gloves”)
Hi5 VR Glove Developer Guidelines
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
Step 6: Demagnetization (see “2.5.3 Demagnetization”)
Step 7: Calibration (see “5. Calibration Instructions”)
2.5.2 Pairing Gloves
Each set of Hi5 HAS ALREADY BEEN PAIRED in the factory, so normally you DO NOT
need to pair them again and the Glove will connect to the Dongle automatically. However,
if you mix different sets of Gloves up (the indicator lights of the Gloves and Dongle remain
in breathing status), you need to re-pair the Dongle and Gloves. The method is as follows:
Step 1. Dongle:
1. Plug in the Dongle into PC:
The indicator light will start to breathe.
2. The Dongle entering pairing mode:
Press and hold the button on the Dongle for 3 seconds (release when the indicator light turns on to a
solid state): The indicator light will slowly flash (flash at 1Hz). Now the Dongle is in pairing mode and
waiting for connection with the Glove/Gloves.
Step 2. Glove:
A. Pair of Gloves:
1. Turn on both Gloves:
The indicator lights on both Gloves will start to breathe.
2. Both Gloves entering the pairing mode:
Pressing and holding the buttons of both Gloves for 3 seconds(release when the 2 indicator lights
turn on to a solid state):The 2 indicator lights will slowly flash (flash at 1Hz). Now the Gloves are in
pairing mode and they will connect to the Dongle automatically.
3. Now the Gloves and Dongle will enter working mode automatically (rapid flashing at
20Hz). The pairing operation for one pair of Gloves is now completed.
B. Single Glove:
1. Turn on the Glove:
Hi5 VR Glove Developer Guidelines
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
The indicator light will start to breathe.
2. The Glove entering pairing mode:
Press and hold the button on the Glove for 3 seconds (release when the indicator light turns on to a
solid state): The indicator light will slowly flash (flash at 1Hz). Now the Glove is in pairing mode and it
will connect to the Dongle automatically (the indicator light will breathe after pairing).
3. Re-plug the Dongle into PC.
4. Now the Glove and Dongle will enter working mode automatically (rapid flashing at
20Hz). The pairing operation for single Glove is now completed.
Notice:

Please make sure the battery is full when pairing Gloves.

If you have more than one set of Hi5 Gloves that need to be paired, please do the
above operation one set at a time, but not at the same time.

You can stick the same color stickers on each set of already paired Gloves and
Dongle, to avoid mixing up different pairs of Gloves.

Once paired, the Glove and Dongle will reconnect automatically in the future.

You can also refer to the “Pairing Glove Tutorial Video” on the Hi5 website
“hi5vrglove.com” to get a more comprehensive understanding of how to do the pairing
glove procedure.
2.5.3 Demagnetization
[ IMPORTANT ] Demagnetization is the fundamental operation of Hi5. Please make sure
you finish demagnetization procedure successfully before you do other
operations.
If you find obvious drifting of the hands model during use, or the Dongle indicator light
flashes and the Glove indicator light turns on to a solid state, or you see the “magnet icon”
in Hi5 calibration sample turns red, this means that there is magnetic interference around
the sensors (or the sensors are magnetized).
1. First, please check if the magnetic environment is clean and if there are any
ferromagnetic substances around the Gloves. If so, please keep the gloves away from
all the above environment or substances (Including but not limited to the following
items).
Hi5 VR Glove Developer Guidelines
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
( Figure 2.5-1: keep away from magnetic items )
2. Do demagnetization operation: please refer to the “Demagnetization Tutorial Video” on
the Hi5 website “hi5vrglove.com” to get a more comprehensive understanding of how
to do the demagnetization procedure.
3. The drifting problem will disappear and the Gloves indicator light will return to rapid
flashing after you finish the demagnetization operation successfully.
Hi5 VR Glove Developer Guidelines
Hi5 VR Glove
Developer Guidelines
NOITOM corporation
Sep.2017
V1.1
3. Mechanical Parts
3.1 Mounting Optical Tracking Devices
Mounting optical tracking devices directly onto Hi5 Gloves
Example: Mounting VIVE Tracker (“Tracker”)
Step 1. Find the 1/4’’ bolt and the stabilizing pin on the Glove.
Find the 1/4’’ screw nut and the stabilizing pin recess on the back of the Tracker.
Strap
1/4”screw nut
1/4”bolt
Stabilizing pin recess
Stabilizing pin
( Figure 3.1-2 VIVE Tracker )
( Figure 3.1-1 Hi5 Glove)
Step 2. Loosen the strap (no need to take the strap off, you will need to open the velcro
on the bottom), and you will find the bolt ring on the back side of the Glove’s
plastic casing.
Stabilizing
pin
( Figure 3.1-3 )
Hi5 VR Glove Developer Guidelines
Bolt
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
Step 3. Align the stabilizing pin (Glove) to the stabilizing pin recess (Tracker) and the bolt
(Glove) to the screw nut (Tracker), and screw tightly. Please do NOT pull
downward on the bolt when screwing in the Tracker.
( Figure 3.1-4 )
Step 4. Tighten up the strap and close the underneath velcro. Mounting completed.
Please reverse the steps when taking the Tracker off from the Hi5 Glove.
( Figure 3.1-5 )
It’s also supported to use VIVE controller (“Controller”) as the optical tracking device
instead of Tracker. Please use the “Hi5-VIVE Controller Connector” (“Connector”, sold
separately) to mount the controller onto Hi5 Glove. The way of mounting Connector is the
same as mounting Tracker; and it’s suggested to mount the Connector to Hi5 first, then
put on Hi5, then put the Controller into the Connector after wearing Hi5, since the
Controller is heavy.
Hi5 VR Glove Developer Guidelines
10
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
( Figure 3.1-6 )
Hi5 VR Glove Developer Guidelines
11
Hi5 VR Glove
Developer Guidelines
NOITOM corporation
Sep.2017
V1.1
3.2 Wearing Gloves
Steps and things to note when putting on and taking off the Gloves:
1. Take off watches and bracelets and roll up your sleeves before wearing the Hi5
Gloves.
2. Mount the optical tracking device successfully BEFORE wearing the Hi5 Gloves.
3. It’s recommended to wear thin plastic gloves before putting on the Hi5 Gloves (you
can find 2 pairs of plastic gloves in every Hi5 package).
4. Open the velcro on the wrist strap and put on the Hi5 Glove to the right position, then
tighten and fasten the strap.
Notice:
When adjusting the wrist strap, pull the PU pad on the end of the strap instead of

tugging on the velcro directly, to avoid damaging the fabric.
Each finger sensor should be right on the top of THE 2nd SECTION of each

finger.
( Figure 3.2-1 )

The relative positions of sensors and the optical tracking device to the hand
should NOT change due to hand movements.
Hi5 VR Glove Developer Guidelines
12
Hi5 VR Glove
Developer Guidelines
NOITOM corporation
Sep.2017
V1.1
5. Taking off Hi5 Gloves:
Notice: To avoid damaging the Gloves, please DO NOT pull on the inner cables when
taking off the Gloves.
Step 1. Loosen the wrist strap first.
Step 2. Pull the Gloves fingertips a little past your fingertips.
Step 3. Take off the Gloves by pulling the 2 strap rings on the palm side (beneath the
cover fabric), in order to avoid pulling inner cables.
( Figure 3.2-2 )
Hi5 VR Glove Developer Guidelines
( Figure 3.2-3 )
13
Hi5 VR Glove
Developer Guidelines
NOITOM corporation
Sep.2017
V1.1
4. SDK
Unity and Unreal SDKs, calibration samples and relevant documents for Hi5 are provided
on the Hi5 website “hi5vrglove.com”. Please download them there.
Hi5 VR Glove Developer Guidelines
14
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
5. Calibration Instructions
5.1 Notice
1. Before doing this calibration, please make sure your Hi5 Gloves are not magnetized.
To demagnetize the Hi5 Gloves, please follow the demagnetization instructions.
2. Please do the calibration procedure every time the optical tracking system is either
moved, recalibrated, or when the user of the Hi5 Gloves is changed.
3. When doing the calibration, make sure the optical tracking devices don’t lose tracking
during the whole calibration process, otherwise the calibration results will be wrong.
4. Please watch the “Calibration Tutorial Video” on the Hi5 website “hi5vrglove.com” to
get a more comprehensive understanding of how to do the calibration poses.
5.2 Calibration Steps
The full calibration procedure includes two steps in order: B pose (Buddha pose) and P
pose (Pinch pose). The B pose is the basic pose, which MUST be done after you set up
your optical tracking system. P pose will improve your thumb performance to achieve
“finger touch”. However, if you are already satisfied with B pose results, P pose is
optional.
Step 1. B (Buddha) pose:
( Figure 5.2-1 )
B pose is used to calibrate the rotation between the optical tracking system and the
Glove’s inertial global coordinate system, and your palm and finger (except thumb)
sensors. It is a dynamic calibration pose.
Hi5 VR Glove Developer Guidelines
15
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
When you use the system for the first time, or any time you move or recalibrate the
optical tracking system, you MUST do B pose calibration to get the correct relation
between the optical and inertial systems.
1.
Keep the palms of your hands touching together in front of your chest.
2.
All fingers, except thumbs, should be kept close together and point the same
direction in front of your body.
3.
Keep your hands and forearms on a straight line.
4.
Start with your forearms pointing the oblique up direction, and rotate your forearms
around elbow joints between upper to lower positions 2~3 times.
Pay Attention:
Avoid fingers pointing vertically upward, pointing the rear direction of your body, pointing
to the left or right of your facing direction, or askew moving route.
The following are some typical WRONG B poses:

The fingers are pointing to the left or right of your facing direction.
( Figure 5.2-2 )

The palms are not perpendicular to the ground.
( Figure 5.2-3 )
Hi5 VR Glove Developer Guidelines
16
Hi5 VR Glove
NOITOM corporation

Developer Guidelines
Sep.2017
V1.1
The fingers are splayed or the fingers and forearm are not pointing to the same
direction on a straight line.
( Figure 5.2-4 )

The fingers are pointing vertically upward or pointing the rear direction of your body.
( Figure 5.2-5 )

The moving route is askew.
( Figure 5.2-6 )
Hi5 VR Glove Developer Guidelines
17
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
Step 3. P (Pinch) pose:
( Figure 5.2-7 )
P pose is used to calibrate your thumb sensors. It is a static calibration pose.

On both hands, tough the thumb and index finger lightly together. Keep thumb
STRAIGHT from thumb root to thumb tip.

The index finger should bend naturally and touch the tip of the thumb.

The other three fingers should be kept in a resting position (no posture
requirements).
Pay Attention:

Avoid obvious joint bending between thumb tip and the 2nd bone.
( Figure 5.2-8 )
Hi5 VR Glove Developer Guidelines
18
Hi5 VR Glove
NOITOM corporation
Developer Guidelines
Sep.2017
V1.1
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Hi5 VR Glove Developer Guidelines
19
Download: HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Mirror Download [FCC.gov]HI5-RG-01 Noitom Hi5 VR Glove_NTM-Hi5-BE-RG-01 User Manual  Beijing Noitom Technology .
Document ID3794794
Application IDJE/rPOYFREHDBaucXKOmww==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize87.61kB (1095109 bits)
Date Submitted2018-03-25 00:00:00
Date Available2018-04-10 00:00:00
Creation Date2018-02-01 09:56:57
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2018-02-01 09:56:57
Document TitleUser Manual
Document CreatorMicrosoft® Word 2013
Document Author: NOITOM

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 22
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : NOITOM
Creator                         : Microsoft® Word 2013
Create Date                     : 2018:02:01 09:56:57+08:00
Modify Date                     : 2018:02:01 09:56:57+08:00
Producer                        : Microsoft® Word 2013