UC912ESERIAL IP PHONE User Manual Nanjing Hanlong Technology.

Nanjing Hanlong Technology. IP PHONE

Page 1 of UC912ESERIAL IP PHONE User Manual  Nanjing Hanlong Technology.
Page 2 of UC912ESERIAL IP PHONE User Manual  Nanjing Hanlong Technology.

Blue Tooth
The Model UC912E connects to a wide range of Bluetooth Headset, compatible with Bluetooth
specification V4.0 and backwards compatible with 1.1, 1.2, 2.0 and 3.0.
How to Enable headset mode?
1) Find Menu then navigate as follows:Menu->Settings->Basic Setting->Headset:
2) Enable the Headset priority
3) Choose the “User HeadSet” or “Both” from “ringer Device for headset” option
4) Press the save button to save the configuration。
5) Press the headset key on phone’s during the idle status when you accomplish the abovementioned configuration. Headset icon will display on phone status bar
How to activate Bluetooth via phone interface?
1) Find Menu then navigate as follows:
Menu Settings Basic Setting Bluetooth
2) Press the save button to save the configuration.
3) You will see the Bluetooth icon on phone’s homepage status bar during the idle status.
(This icon means that phone has no pair the Bluetooth device.)
How to activate Bluetooth feature via web interface?
1) Login the phone’s webpage Setting Feature Bluetooth
How to open the Bluetooth pairing mode on Bluetooth headset?
1) Turn on the Bluetooth headset.
2) Long press the multifunction key on the Bluetooth headset until the indicator LED alternately
flashes red and blue.
The Bluetooth headset is in pairing mode.
How to scan the Bluetooth headset device on phone interface?
1) Press the Scan button on phone interface.
2) The phone will enter the scan interface.
The phone starts searching for Bluetooth headsets within the working range of 32 feet.
3) There will displays all detected Bluetooth headsets on the phone.
4) Choose the desired Bluetooth Device from the list and connect to it.
5) If the Bluetooth Device connected/paired successfully, you will see the “Connect Success!”
and connected successfully icon.
6) When you back to idle interface, you will see the connected successfully icon.
Note: If the Bluetooth headset has a PIN, you need to configure the PIN via web
interface: Default PIN is 0000.
1) Login the phone’s webpage->Setting->Feature->Bluetooth
How to edit device information on phone interface?
1) Find Menu then navigate as follows:
MenuSettingsBasic SettingBluetooth: Edit Device Information
2) Press the enter button, you can edit the Device Name.
How to adjust the earphone volume during a call?
With the Bluetooth headset paired, you can do the following:
Press the Volume key (+) on the Bluetooth headset to increase the volume.
Press the Volume key (-) on the Bluetooth headset to decrease the volume.
How to Ending Calls?
With the Bluetooth headset paired, press the multifunction key on the Bluetooth headset
to end a call.
Troubleshooting
Why can’t the phone detect the Bluetooth headset?
1) Ensure the Bluetooth headset is turned on.
2) Ensure the Bluetooth headset is in pairing mode, when the phone is searching for Bluetooth
headsets.
Why there is a noise?
1) Check the battery level. If the battery level is low, charge the Bluetooth headset.
2) Ensure the Bluetooth headset and the phone are within the working range of 10 meters
(32 feet) and there is no obvious interference (walls, doors, etc.) between them.
WIFI
Enabling WiFi feature via phone interface:
1) Find Menu then navigate as follows
Menu->Settings->Basic Setting->WiFi
2) Press the Switch button to turn on WiFi feature.
3) Press the Save button to save the configuration.
Connect to an available wireless network via phone interface:
1) Find Menu then navigate as follows
Menu->Settings->Basic Setting->WiFi: Available Network(s)
2) Press the Enter button, you will see many available wireless networks.
3) You can press the “scan” button to scan the wireless network.
4) You can press the “Detail” button to view a wireless network’s detail information.
5) Choose desired wireless network and then press the “Connect” button.
6) You must enter the wireless network’s password.
7) If the wireless network’s password is correct, the wireless network will connect successfully.
Add a Wireless Network Manually via phone interface?
1) Find Menu then navigate as follows
Menu->Settings->Basic Setting->WiFi: The Storage Network.
2) Press the “Add” button to add a wireless network.
Select a Security Mode.
Enter the desired wireless network (SSID).
If the wireless network is secure, please enter its password in the password field.
3) Press the “Save” button to save the configuration.
You can choose this wireless network to connect it.
How to view Wireless Network status?
1) You will see the wireless network connected successfully icon when phone connects
wireless network successfully and back to idle interface.
Note: Contact your network administrator for the WiFi password.
How to Disable WiFi feature?
To disable the WiFi feature via phone interface:
1) Find Menu then navigate as follows:
Menu->Settings->Basic Setting->WiFi
2) Press the Switch button to turn off WiFi feature.
3) Press the Save button to save the configuration.
Troubleshooting
Why can’t the IP phone connect to WiFi?
1) If the network is secure, ensure the entered password is right.
2) Ensure your gateway/router enables the wireless network feature.
3) Reboot your gateway/router.
4) Turn off the WiFi feature on the IP phone and then turn it on again.
Why is the wireless signal strength low?
1) Ensure the IP phone and your gateway/router are within the working range and there is no
obvious interference (walls, doors, etc) between them.
IP Phone
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If thisequipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
RF Power:WIFI:16dBm@11b, 14dBm@11g ,13dBm@11n
BT:10dBm
Operating Frequency Range:2.4GHz~2.4835GHz
User Guide For Blue Tooth&Wifi
--- UC912(E)
Tel: 0086-25-84658050 | Fax: 0086-25-84658319 | Mail: support@htek.com | Web:www.htek.com
Add: 5th Floor, 1st Building Huashen Tech Park10 Huashen Temple Yuhuatai Dis Nanjing 210012 China
Copyright: © Nanjing Hanlong Technology Co., Ltd. 2005-2018 All rights reserved.
Download: UC912ESERIAL IP PHONE User Manual  Nanjing Hanlong Technology.
Mirror Download [FCC.gov]UC912ESERIAL IP PHONE User Manual  Nanjing Hanlong Technology.
Document ID3983893
Application ID10kfObmQ7oOSdzA0/dsMhw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.92kB (211475 bits)
Date Submitted2018-08-30 00:00:00
Date Available2018-08-30 00:00:00
Creation Date2018-05-21 11:46:58
Producing SoftwareMicrosoft? Office Word 2007
Document Lastmod2018-05-21 11:46:58
Document TitleUser Manual
Document CreatorMicrosoft? Office Word 2007
Document Author: Administrator

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Administrator
Creator                         : Microsoft? Office Word 2007
Create Date                     : 2018:05:21 11:46:58+08:00
Modify Date                     : 2018:05:21 11:46:58+08:00
Producer                        : Microsoft? Office Word 2007