TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy

HMD global Oy Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN

Page 1 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 2 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 3 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 4 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 5 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 6 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 7 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 8 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 9 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 10 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 11 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 12 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 13 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 14 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 15 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 16 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 17 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 18 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 19 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 20 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 21 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 22 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Page 23 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy

TEST REPORT
No. I18Z62335-IOT05
for
HMD Global OY
Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN
GSM 850,900, 1800,1900 WCDMA: 1, 5, 8
LTE: 1,3, 5,7,8,20,28,38,40,41(120MHz) mobile phone, Bluetooth 4.2,
WIFI 802.11 b/g/n
FCC ID: 2AJOTTA-1150
with
Hardware Version: 89571_1_12
Software Version: 00XX_1_XXX
Issued Date: 2019-01-18
Note:
The test results in this test report relate only to the devices specified in this report. This report shall not be
reproduced except in full without the written approval of CTTL.
The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST,
or any agency of the U.S. Government.
Test Laboratory:
CTTL, Telecommunication Technology Labs, CAICT
No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191.
Tel: +86(0)10-62304633-2512, Fax: +86(0)10-62304633-2504
Email: cttl_terminals@caict.ac.cn, website: www.caict.ac.cn
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 2 of 23
CONTENTS
1.
0BTEST LABORATORY ......................................................................................................................... 3
1.1.
1.2.
8BTESTING LOCATION ............................................................................................................3
9BTESTING ENVIRONMENT ......................................................................................................3
1.3.
PROJECT DATA .............................................................................................................................. 3
1.4.
SIGNATURE ..................................................................................................................................... 3
2.
1BCLIENT INFORMATION .................................................................................................................. 4
2.1.
2.2.
3.
MANUFACTURER INFORMATION ............................................................................................ 4
2BEQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 5
3.1.
3.2.
3.3.
3.4.
3.5.
4.
12BAPPLICANT INFORMATION....................................................................................................4
14BABOUT EUT .......................................................................................................................5
15BINTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................................5
16BINTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................................5
17BGENERAL DESCRIPTION ......................................................................................................6
18BEUT SET-UPS ....................................................................................................................6
3BREFERENCE DOCUMENTS ............................................................................................................. 7
4.1.
4.2.
19BDOCUMENTS SUPPLIED BY THE APPLICANT ..........................................................................7
20BREGULATIONS AND STANDARDS ..........................................................................................7
5.
4BLABORATORY ENVIRONMENT .................................................................................................... 8
6.
5BSUMMARY OF TEST RESULTS ...................................................................................................... 9
6.1.
6.2.
6.3.
7.
21BSUMMARY OF TEST RESULTS ..............................................................................................9
2BTERMS USED IN THE SUMMARY OF TEST RESULTS .............................................................10
23BSTATEMENTS ...................................................................................................................10
TEST EQUIPMENT UTILIZED .......................................................................................................11
ANNEX A: MEASUREMENT RESULTS ............................................................................................... 12
24BA.1. ELECTRIC FIELD STRENGTH OF FUNDAMENTAL AND OUTSIDE THE ALLOCATED BANDS .............12
25BA.2. ELECTRIC FIELD RADIATED EMISSIONS (< 30MHZ) ................................................................14
26BA.3. ELECTRIC FIELD RADIATED EMISSIONS (≥30MHZ) ...............................................................16
27BA.4. FREQUENCY TOLERANCE .....................................................................................................18
28BA.5. 20DB BANDWIDTH ................................................................................................................19
29BA.6. CONDUCTED EMISSION .........................................................................................................21
ANNEX A: ACCREDITATION CERTIFICATE..................................................................................... 23
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 3 of 23
1. Test Laboratory
0B
1.1. Testing Location
8B
CTTL (Huayuan North Road)
Address:
No. 52, Huayuan North Road, Haidian District, Beijing,
P. R. China 100191
CTTL(Shouxiang)
Address:
No. 51 Shouxiang Science Building, Xueyuan Road,
Haidian District, Beijing, P. R. China 100191
1.2. Testing Environment
9B
Normal Temperature:
Extreme Temperature:
Relative Humidity:
15-35℃
-10/+55Ԩ
20-75%
1.3. Project data
Testing Start Date:
Testing End Date:
2019-01-02
2019-01-18
1.4. Signature
Zheng Mengxuan
(Prepared this test report)
Zhu Liang
( Reviewedthis test report)
Gao Hong
(Approved this test report)
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 4 of 23
2. Client Information
1B
2.1. Applicant Information
12B
Company Name:
Address:
Country:
Contact
Tel:
HMD Global OY
Bertel Jungin aukio 9,02600 ESPOO,FINLAND
FINLAND
Rosario Casillo
Email:
Rosario.Casillo@hmdglobal.com
2.2. Manufacturer Information
Company Name:
HMD Global OY
Address:
Country:
Contact
Tel:
Bertel Jungin aukio 9,02600 ESPOO,FINLAND
FINLAND
Rosario Casillo
Email:
Rosario.Casillo@hmdglobal.com
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 5 of 23
3. Equipment Under Test (EUT) and Ancillary Equipment (AE)
2B
3.1. About EUT
14B
Description:
Multi-band GSM/WCDMA/LTE phone with Bluetooth,
WLAN GSM 850,900, 1800,1900 WCDMA : 1, 5, 8
LTE : 1,3, 5,7,8,20,28,38,40,41(120MHz)mobile phone,
Bluetooth 4.2, WIFI 802.11 b/g/n
FCC ID
2AJOTTA-1150
With NFC Function:
Yes
Frequency:
13.56 MHz
Antenna:
Internal
Operation Voltage:
3.5VDC to 4.4VDC (nominal: 3.9VDC)
Operation Temperature:
-10°C to +55°C
Note1: Photographs of EUT are shown in ANNEX B of this test report. For component list, please
refer to documents of the manufacturer.
3.2. Internal Identification of EUT Used during the Test
15B
Mobile phone identification
EUT ID* IMEI
HW Version
SW Version
EUT3
352900100018964
89571_1_12
00XX_1_XXX
EUT45
352900100018287
89571_1_12
00XX_1_XXX
*EUT ID: is used to identify the test sample in the lab internally.
3.3. Internal Identification of AE Used during the Test
16B
AE ID*
AE1
Battery
AE2
Battery
AE3
Charger
AE5
USB Cable
AE6
USB Cable
AE8
PICC Card
AE9
Charger
AE1
Model
Manufacturer
Capacitance
Nominal voltage
AE2
Model
NO TEST
WT330
Jiade Energy Technology(Zhuhai) Co.,Ltd.
3000mAh
3.85V
WT330
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 6 of 23
Manufacturer
Capacitance
Nominal voltage
AE3
Model
Manufacturer
Length of cable
AE5
Model
Manufacturer
Length of cable
AE6
Model
Manufacturer
Length of cable
AE8
Model
Manufacturer
Length of cable
AE9
Model
Manufacturer
Length of cable
Sunwoda Electronic Co.,Ltd
3000mAh
3.85V
CH-35U
Shenzhen Tianyin Electronics Co.,Ltd
CB-35A
Leagtech Electronics Co.,Ltd
CB-35A
Shenzhen BRL Technology Co.,Ltd.
PICC Card
CH-35E
Shenzhen Tianyin Electronics Co.,Ltd
*AE ID: is used to identify the test sample in the lab internally.
3.4. General Description
17B
This is a product supporting Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN GSM
850,900, 1800,1900 WCDMA: 1, 5, 8 LTE: 1,3, 5,7,8,20,28,38,40,41(120MHz) mobile phone,
Bluetooth 4.2, WIFI 802.11 b/g/n.
Manuals and specifications of the EUT were provided to fulfil the test.
Samples undergoing test were selected by the client.
Manufacturer's declaration: NFC work does not depend on other access methods, such as WLAN,
GPRS, etc.
3.5. EUT Set-ups
18B
EUT Set-up No.
Combination of EUT and AE
Remarks
30B49B
Set. NFC01
EUT3 + AE1 + AE3+ AE5 + AE8
--
Set. NFC02
EUT 45
--
Set. NFC03
EUT3 + AE8
--
The Transmit State of NFC: the NFC function is on. The EUT will transmit the NFC data and
command continuously during the test.
The Transmit State of without modulation: The EUT will transmit the CW signal at the operating
frequency.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 7 of 23
4. Reference Documents
3B
4.1. Documents Supplied by the Applicant
19B
EUT feature information is supplied by the applicant or manufacturer, which is the basis of testing.
4.2. Regulations and Standards
20B
The following documents listed in this section are referred for testing.
Reference
CFR 47 Part 2
CFR 47 Part 15
Title
Part 2 — Frequency Allocations and Radio Treaty Matters;
General Rules and Regulations.
Part 15 — Radio Frequency Devices.
Subpart C — Intentional Radiators.
§ 15.35 Measurement detector functions and bandwidths.
§ 15.207 Conducted limits.
§ 15.209 Radiated emission limits, general requirements.
§ 15.215 Additional provisions to the general radiated
emission limitations.
§ 15.225 Operation within the band 13.110–14.010 MHz.
American National Standard of Procedures for Compliance
Testing of Unlicensed Wireless Devices
ANSI C63.10
Version
2016
2016
2013
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 8 of 23
5. LABORATORY ENVIRONMENT
4B
Semi-anechoic chamber SAC-1 (23 meters×17meters×10meters)
limits along the EMC testing:
did not exceed following
Temperature
Min. = 15 ℃, Max. = 35 ℃
Relative humidity
Min. = 15 %, Max. = 75 %
Shielding effectiveness
0.014MHz - 1MHz, >60dB;
1MHz - 1000MHz, >90dB.
Electrical insulation
> 2 M
Ground system resistance
Normalised site attenuation (NSA)
< 4
< ± 4 dB, 3m/10m distance,
from 30 to 1000 MHz
Site voltage standing-wave ratio (SVSWR)
Between 0 and 6 dB, from 1GHz to 18GHz
Uniformity of field strength
Between 0 and 6 dB, from 80 to 3000 MHz
Fully-Anechoic Chamber FAC-3 (8.6m×6.1m×3.85m) did not exceed following limits along the
testing:
Temperature
Min. = 15 ℃, Max. = 25 ℃
Relative humidity
Min. = 30 %, Max. = 60 %
Shielding effectiveness
> 110 dB
Electrical insulation
> 2 M
Ground system resistance
Site voltage standing-wave ratio (SVSWR)
<1 
Between 0 and 6 dB, from 1 to 18GHz
Uniformity of field strength
Between 0 and 6 dB, from 80 to 4000 MHz
Conducted Chamber did not exceed following limits along the testing:
Temperature
Min. = 15 ℃, Max. = 25 ℃
Relative humidity
Min. = 30 %, Max. = 60 %
Shielding effectiveness
> 110 dB
Electrical insulation
> 2 M
Ground system resistance
< 0.5 
Control Room did not exceed following limits along the testing:
Temperature
Min. = 15 ℃, Max. = 25 ℃
Relative humidity
Min. =30 %, Max. = 60 %
Shielding effectiveness
> 110 dB
Electrical insulation
> 2 M
Ground system resistance
< 0.5 
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 9 of 23
6. SUMMARY OF TEST RESULTS
5B
6.1. Summary of Test Results
21B
Test Cases
Clause in
Regulation
Electric Field Strength of
Fundamental Emissions
CFR 47 § 15.225(a)
Electric Field Strength of
Outside the Allocated Bands
CFR 47 § 15.225(b)
CFR 47 § 15.225(c)
Electric Field Radiated
Emissions
CFR 47 § 15.209
CFR 47 § 15.225(d)
A.2
P (Set. NFC01)
A.3
P (Set. NFC01)
Frequency Tolerance
CFR 47 § 15.225(e)
A.4
P (Set. NFC02)
20dB Bandwidth
CFR 47 § 15.215(c)
A.5
P (Set. NFC02,
03)
Conducted Emissions
CFR 47 § 15.207
A.6
P (Set. NFC01)
No
Section in
This Report
Verdict
P (Set. NFC03)
A.1
P (Set. NFC03)
The measurement is carried out according to ANSI C63.10. See ANNEX A for details.
Test Conditions:
For this report, all the test cases listed above were tested under normal Temperature, Voltage,
humidity, and Air Pressure. The specific conditions are as following:
T min
-20 ℃
T nom
25 ℃
T max
55 ℃
V min
3.6 V
V nom
3.8 V
V max
4.2 V
Humidity
H nom
44%
Air Pressure
A nom
1010 mbar
Temperature
Voltage
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 10 of 23
6.2. Terms Used in the Summary of Test Results
2B
Terms Used in Condition Column:
T nom
Normal Temperature
T min
Low Temperature
T max
High Temperature
V nom
Normal Voltage
V min
Low Voltage
V max
High voltage
H nom
Norm Humidity
A nom
Norm Air Pressure
Terms Used in Verdict Column:
Pass, The EUT complies with the essential requirements in the standard.
NP
Not Perform, The test was not performed by CTTL
NA
Not Applicable, The test was not applicable
Fail, The EUT does not comply with the essential requirements in the standard
Abbreviations:
AC
Alternating Current
AFH
Adaptive Frequency Hopping
BW
Band Width
E.I.R.P.
equivalent is tropical radiated power
ISM
Industrial, Scientific and Medical
RF
Radio Frequency
Tx
Transmitter
6.3. Statements
23B
The test cases listed in Section 6.1 of this report for the EUT specified in Section 3 were performed
by CTTL according to the reference documents in Section 4.
The EUT meets all applicable requirements of the regulations and standards in Section 4.2.
This report only deals with the NFC function among the features described in section 3.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 11 of 23
7. Test Equipment Utilized
NAME
TYPE
SERIES
NUMBER
PRODUCER
CAL. DUE
DATE
CAL.
INTERVAL
1.
LISN
ESH3-Z5
825562/028
Rohde &
Schwarz
1 year
2019-08-22
2.
Test Receiver
ESCI
100766
Rohde &
Schwarz
1 year
2019-04-16
3.
Test Receiver
ESU26
100376
Rohde &
Schwarz
1 year
2019-11-27
4.
BiLog Antenna
VULB9163
9163-514
Schwarz beck
3 years
2019-02-03
5.
Dual-Ridge
Waveguide Horn
Antenna
3117
00139065
ETS-Lindgren
3 years
2020-09-21
6.
H-field Antenna
HFH2-Z2
829324/007
R&S
3 years
2019-12-03
7.
Vector Signal
Analyser
FSV40
101047
Rohde &
Schwarz
1 year
2019-07-27
8.
Spectrum Analyzer
RSA3408A
B010277
Tektronix
1 Year
2018-09-20
NO.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 12 of 23
ANNEX A: MEASUREMENT RESULTS
A.1. Electric Field Strength of Fundamental and Outside the Allocated bands
24B
A.1.1. Reference
See Clause 6.4 of ANSI C63.10-2013 specifically.
See Clause 4 and Clause 5 of ANSI C63.10-2013 generally.
A.1.2. Measurement Methods
The transmitter carrier output levels (E-Field) from the EUT are measured in a semi-anechoic
chamber. The EUT is placed on a non-conductive stand of 80cm high, and at a measurement
distance of 3m from the receiving antenna. The center of the receiving loop antenna is 1.0 meter
above the ground. The E-field is measured with a shielded loop antenna connected to a
measurement receiver. Detected E-field was maximized by rotating the EUT through 360° and
adjusting the receiving antenna polarizations. The maximization processes were repeated with the
EUT positioned respectively in its three orthogonal axes. The measurements were performed with
the peak detector and if required, the quasi-peak detector.
The measurement bandwidth is:
Frequency of Emission (MHz)
RBW/VBW
12.56-14.56
10/30 kHz
The E-field measured at 3m is calculated as:
E-field (dBµV/m) = Rx (dBµV) + Cable Loss (dB) + AF@3m (dB/m)
A.1.3. EUT Operating Mode and Test Conditions
The measurement of EUT is carried out under the transmit state of NFC (See 3.5).
The EUT is powered by a travel adapter.
During the measurements, the ambient temperature of the electromagnetic anechoic chamber is
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 13 of 23
in the range of 15 ~ 25 ℃.
A.1.4. Limits
E-field Strength Limit @ 30 m
(µV/m)
E-field Strength Limit @ 3 m
(dBµV/m)
+15,848
124
13.410 to 13.553
13.567 to 13.710
+334
90
13.110 to 13.410
13.710 to 14.010
+106
81
Frequency Range (MHz)
13.560 ± 0.007
Note: Where the limits have been defined at one distance, and a signal level measured at
another, the limits have been extrapolated using the following formula:
Extrapolation(dB)  40log10 Measurement Distance Specification Distance 
A.1.5. Measurement Results
Measurement results of normal conditions see Figure A-1 for different set-ups of EUT. The result
displayed take into account applicable antenna factors and cable losses.
Conclusions: Set. NFC03, PASS.
Figure A-1: Set. NFC03
A.1.6. Measurement Uncertainty
Measurement uncertainty: U = 3.44 dB, k=2.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 14 of 23
A.2. Electric Field Radiated Emissions (< 30MHz)
25B
A.2.1. Reference
See Clause 6.4 of ANSI C63.10-2013 specifically.
See Clause 4 and Clause 5 of ANSI C63.10-2013 generally.
A.2.2. Measurement Methods
The transmitter carrier output levels (E-Field) from the EUT are measured in a semi-anechoic
chamber. The EUT is placed on a non-conductive stand of 80cm high, and at a measurement
distance of 3m from the receiving antenna. The center of the receiving loop antenna is 1.0 meter
above the ground. The E-field is measured with a shielded loop antenna connected to a
measurement receiver. Detected E-field was maximized by rotating the EUT through 360° and
adjusting the receiving antenna polarizations. The maximization processes were repeated with the
EUT positioned respectively in its three orthogonal axes. The measurements were performed with
the peak detector and if required, the quasi-peak detector.
The measurement bandwidth is:
Frequency of Emission (MHz)
RBW/VBW
0.009-0.15
100/300 Hz
0.15-30
10/30 kHz
The E-field measured at 3m is calculated as:
E-field (dBµV/m) = Rx (dBµV) + Cable Loss (dB) + AF@3m (dB/m)
A.2.3. EUT Operating Mode and Test Conditions
The measurement of EUT is carried out under the transmit state of NFC (See 3.5).
The EUT is powered by a travel adapter.
During the measurements, the ambient temperature of the electromagnetic anechoic chamber is
in the range of 15 ~ 25 ℃.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 15 of 23
A.2.4. Limits
Frequency Range (MHz)
E-field Strength Limit @ 30m
(mV/m)
E-field Strength Limit @ 3m
(dBµV/m)
0.009-0.490
2400/F(kHz)
129-94
0.490-1.705
24000/F(kHz)
74-63
1.705-30
30
70
Note: Where the limits have been defined at one distance, and a signal level measured at
another, the limits have been extrapolated using the following formula:
Extrapolation(dB)  40log10 Measurement Distance Specification Distance 
A.2.5. Measurement Results
Measurement results of normal conditions see Figure A-2 for different set-ups of EUT. The result
displayed take into account applicable antenna factors and cable losses.
Conclusions: Set. NFC01, PASS.
Figure A-2: Set. NFC01
A.2.6. Measurement Uncertainty
Measurement uncertainty: U = 3.44 dB, k=2.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 16 of 23
A.3. Electric Field Radiated Emissions (≥30MHz)
26B
A.3.1. Reference
See Clause 6.5 of ANSI C63.10-2013 specifically.
See Clause 4 and Clause 5 of ANSI C63.10-2013 generally.
A.3.2. Measurement Methods
The electric field radiated emissions from the EUT are measured in a semi-anechoic chamber. The
EUT is placed on a non-conductive stand of 80cm high, and at a measurement distance of 3/10m
from the receiving antenna. The receiving antennas connected to a measurement receiver. In
order to search for maximum field strength emitted from the EUT, the receiving antenna can be
moved between the height of 1.0 m to 4.0 m. Detected E-field was maximized at each frequency
by rotating the EUT through 360° and adjusting the receiving antenna positions for both vertical
and horizontal antenna polarizations. The maximization processes were repeated with the EUT
positioned respectively in its three orthogonal axes. The measurements were performed with the
peak detector and if required, the quasi-peak detector.
The measurement bandwidth is:
Frequency of Emission (MHz)
RBW/VBW
30-1000
120kHz
A.3.3. EUT Operating Mode and Test Conditions
The measurement of EUT is carried out under the transmit state of NFC (See 3.5).
EUT1 had been connected to a travel adapter.
During the measurements, the ambient temperature of the electromagnetic anechoic chamber is
in the range of 15 ~ 25 ℃.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 17 of 23
A.3.4. Limits
E-field Strength Limit
@ 3m
(mV/m)
E-field Strength Limit
@ 3m
(dBµV/m)
E-field Strength Limit
@ 10m
(dBµV/m)
30-88
100
40
30
88-216
150
43.5
33.5
216-960
200
46
36
960-1000
500
54
44
Frequency
Range (MHz)
A.3.5. Measurement Results
Measurement results of normal conditions see Figure A-3 for different set-ups of EUT. The result
displayed take into account applicable antenna factors and cable losses.
Conclusions: Set. NFC01, PASS.
A.3.6. Measurement Uncertainty
Measurement uncertainty: U =5.40 dB, k=2
Figure A-3: Set. NFC01
Final Result 1
Frequency
(MHz)
33.007000
40.573000
41.834000
81.216000
186.26700
916.58000
QuasiPeak
(dBµV/m)
23.2
31.1
29.9
22.5
19.8
31.1
Height
Polarization
Azimuth
-38.0
93.0
126.0
266.0
14.0
-34.0
(cm)
125.0
100.0
100.0
100.0
100.0
118.0
(deg)
Corr.
(dB)
-0.8
0.8
0.8
-5.4
-2.5
12.2
Margin
(dB)
16.8
8.9
10.1
17.5
23.7
14.9
Limit
(dBµV/m)
40.0
40.0
40.0
40.0
43.5
46.0
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 18 of 23
A.4. Frequency Tolerance
27B
A.4.1. Reference
See Clause 13.6 of ANSI C63.10-2013 specifically.
See Clause 4, Clause 5, and Clause 6 of ANSI C63.10-2013 generally.
A.4.2. Measurement Methods
The transmitter output signal was picked up by coil antenna connected to the frequency counter.
The center frequency was measured with 30Hz RBW and 1kHz span.
During the test, the EUT was placed in a thermal chamber until thermal balance and lasting
appropriate time.
A.4.3. EUT Operating Mode and Test Conditions
The measurement of EUT is carried out under the transmit state of without modulation (See 3.5).
EUT1 had been not connected to a travel adapter.
Operation Temperature: T min, T nom, and T max with V nom.
Operation Voltage: V min and V max with T nom.
A.4.4. Test Layouts
See A.4.2.
A.4.5. Limits
The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% of the operating
frequency.
A.4.6. Measurement Results
Measurement results see Table A-1 for different test conditions.
Conclusions: Set. NFC02, PASS.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 19 of 23
Table A-1: Frequency Stability VS Temperature and Voltage
Temperature
Voltage
T min
T max
T nom
T nom
T nom
V nom
V nom
V nom
V min
V max
Temperature
Voltage
T min
T max
T nom
T nom
T nom
V nom
V nom
V nom
V min
V max
Startup
13.5600331
13.5599881
13.5600006
13.5599919
13.5599863
Frequency Error (MHz)
2 Min Later
5 Min Later
13.5600425
13.5600369
13.5599738
13.5599713
13.5604050
13.5599994
13.5599938
13.5599931
13.5599906
13.5599925
10 Min Later
13.5600331
13.5599750
13.5599999
13.5603900
13.5599938
Startup
0.000
0.000
0.000
0.000
0.000
Frequency Error (%)
2 Min Later
5 Min Later
0.000
0.000
0.000
0.000
0.003
0.000
0.000
0.000
0.000
0.000
10 Min Later
0.000
0.000
0.000
0.003
0.000
A.4.7. Measurement Uncertainty
Measurement uncertainty: U =77 Hz, k=2
A.5. 20dB Bandwidth
28B
A.5.1. Reference
See Clause 13.7 of ANSI C63.10-2013 specifically.
See Clause 4, Clause 5, and Clause 6 of ANSI C63.10-2013 generally.
A.5.2. Measurement Methods
The transmitter output signal was picked up by coil antenna to the spectrum analyzer.
The transmitter output signal was picked up by coil antenna connected to the spectrum analyzer.
The bandwidth of the center frequency was measured with 140Hz RBW, 420Hz VBW and 14kHz
span.
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 20 of 23
A.5.3. EUT Operating Mode and Test Conditions
The measurement of EUT is carried out under the transmit state of NFC and without modulation
(See 3.5).
EUT had been not connected to a travel adapter.
During the measurements, the ambient temperature is in the range of 15 ~ 25 ℃.
A.5.4. Test Layouts
See A.5.2.
A.5.5. Limits
The 20dB bandwidth shall be less than 80% of the permitted frequency band. For 13.56 MHz NFC,
the permitted frequency band is 14kHz, so the limit is 11.2 kHz.
A.5.6. Measurement Results
Measurement results see Figure A-4.
Conclusions: Set. NFC04, PASS.
‘
Figure A-4: Test result of EUT12 at test set. NFC04
A.5.7. Measurement Uncertainty
Measurement uncertainty: U =77 Hz, k=2
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 21 of 23
A.6. Conducted emission
29B
A.6.1. Reference
See Clause 6.2 of ANSI C63.10-2013 specifically.
See Clause 4 and Clause 5 of ANSI C63.10-2013 generally.
A.6.2. Measurement Methods
The conducted emissions from the AC port of the EUT are measured in a shielding room. The EUT
is connected to a Line Impedance Stabilization Network (LISN). An overview sweep with peak
detection was performed. The measurements were performed with a quasi-peak detector and if
required, an average detector.
The conducted emission measurements were made with the following detector of the test receiver:
Quasi-Peak / Average Detector.
The measurement bandwidth is:
Frequency of Emission (MHz)
RBW/VBW
0.15-30
9kHz
Wall of shielded room
Table
AMN
EUT
Mains lead
80 cm
40 cm
A.6.3. EUT Operating Mode and Test Conditions
The measurement of EUT is carried out under the transmit state of NFC (See 3.5).
The EUT is powered by a travel adapter.
During the measurements, the ambient temperature is in the range of 15 ~ 25 ℃.
A.6.4. Limits
Frequency range
(MHz)
Quasi-peak Limit (dBV)
Average Limit (dBV)
0.15 to 0.5
66 to 56
56 to 46
0.5 to 5
56
46
5 to 30
60
50
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 22 of 23
A.6.5. Measurement Results
Measurement results see Figure A-5.
Conclusions: Set. NFC01, PASS.
Note: The measurement result at 13.56MHz is the fundamental emission of NFC signal.
Figure A-5: Test result of EUT1 at test set. NFC01
Final Result 1
Frequency
(MHz)
QuasiPeak
Meas. Time
(dBµV)
Bandwidth
(ms)
Line
(kHz)
Corr.
Margin
(dB)
(dB)
Limit
(dBµV)
1.365000
39.9
2000.0
9.000
L1
10.4
16.1
56.0
1.410000
46.9
2000.0
9.000
L1
10.4
9.1
56.0
1.540500
42.9
2000.0
9.000
L1
10.4
13.1
56.0
2.373000
40.1
2000.0
9.000
10.4
15.9
56.0
2.485500
38.5
2000.0
9.000
L1
10.4
17.5
56.0
2.544000
43.0
2000.0
9.000
L1
10.4
13.0
56.0
Final Result 2
Frequency
(MHz)
Average
(dBµV)
Meas. Time
(ms)
Bandwidth
(kHz)
Line
Corr.
(dB)
Margin
(dB)
Limit
(dBµV)
0.537000
37.1
2000.0
9.000
10.4
6.6
46.0
1.414500
1.477500
2.359500
2.431500
13.560000
40.2
39.4
40.9
33.0
46.7
2000.0
2000.0
2000.0
2000.0
2000.0
9.000
9.000
9.000
9.000
9.000
L1
L1
L1
10.4
10.4
11.0
10.4
10.4
5.1
13.0
3.3
6.6
5.1
46.0
46.0
50.0
46.0
46.0
A.6.6. Measurement Uncertainty
Measurement uncertainty: U = 3.1 dB, k=2
©Copyright. All rights reserved by CTTL.
No. I18Z62335-IOT05
Page 23 of 23
ANNEX A: Accreditation Certificate
***END OF REPORT***
©Copyright. All rights reserved by CTTL.
Download: TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Mirror Download [FCC.gov]TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report I18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up HMD global Oy
Document ID4154591
Application IDnJxkEnPsY3vSE0Ny7vqqmg==
Document DescriptionI18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize42.36kB (529514 bits)
Date Submitted2019-01-31 00:00:00
Date Available2019-02-01 00:00:00
Creation Date2019-01-31 09:45:30
Producing SoftwareAcrobat Distiller 10.1.16 (Windows)
Document Lastmod2019-01-31 09:45:30
Document TitleI18Z62335-IOT05_NFC FCC 15C_Report_Rev0 up
Document CreatorPScript5.dll Version 5.2.2
Document Author: yang

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : yang
Create Date                     : 2019:01:31 09:45:30+08:00
Modify Date                     : 2019:01:31 09:45:30+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - I18Z62335-IOT05_NFC?FCC?15C_Report_?Rev0.doc
Creator                         : yang
Document ID                     : uuid:912a44b5-9c44-4aa2-b542-2858456c88e0
Instance ID                     : uuid:3602437f-e0f6-4d39-b101-23453993dd51
Page Count                      : 23