TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy

HMD global Oy Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN

Page 1 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 2 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 3 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 4 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 5 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 6 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 7 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 8 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 9 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 10 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 11 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 12 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 13 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 14 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 15 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 16 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 17 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 18 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 19 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 20 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 21 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 22 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 23 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 24 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 25 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 26 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 27 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 28 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 29 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 30 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 31 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 32 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 33 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 34 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 35 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 36 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 37 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 38 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 39 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 40 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 41 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Page 42 of TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy

FCC PART 15C
TEST REPORT
No.I18Z62335-IOT08
HMD Global OY
Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN
GSM 850,900, 1800,1900
WCDMA : 1, 5, 8
LTE :1,3,5,7,8,20,28,38,40,41(120MHz)mobile phone,
Bluetooth 4.2,WIFI 802.11 b/g/n
TA-1150
with
FCC ID: 2AJOTTA-1150
Hardware Version: 89571_1_12
Software Version: 00XX_1_XXX
Issued Date: 2019-01-22
Note:The test results in this test report relate only to the devices specified in this report. This report shall not be
reproduced except in full without the written approval of CTTL.
The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST,
or any agency of the U.S.Government.
Test Laboratory:
CTTL, Telecommunication Technology Labs, CAICT
No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191.
Tel:+86(0)10-62304633-2512, Fax:+86(0)10-62304633-2504
Email: cttl_terminals@caict.ac.cn, website: www.caict.ac.cn
No. I18Z62335-IOT08
Page2 of 88
REPORT HISTORY
Report Number
Revision
Description
Issue Date
I18Z62335-IOT08
Rev.0
1st edition
2019-01-22
No. I18Z62335-IOT08
Page3 of 88
CONTENTS
1.
TEST LABORATORY ......................................................................................................................... 5
1.1.
TESTING LOCATION .................................................................................................................... 5
1.2.
TESTING ENVIRONMENT ........................................................................................................... 5
1.3.
PROJECT DATA .............................................................................................................................. 5
1.4.
SIGNATURE ..................................................................................................................................... 5
2.
CLIENT INFORMATION ................................................................................................................... 6
2.1.
APPLICANT INFORMATION ....................................................................................................... 6
2.2.
MANUFACTURER INFORMATION ............................................................................................ 6
3.
EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 7
3.1.
ABOUT EUT ..................................................................................................................................... 7
3.2.
INTERNAL IDENTIFICATION OF EUT ..................................................................................... 7
3.3.
INTERNAL IDENTIFICATION OF AE ........................................................................................ 7
3.4.
EUT SET-UPS .................................................................................................................................. 8
3.5.
GENERAL DESCRIPTION ............................................................................................................ 9
3.6.
INTERPRETATION OF THE TEST ENVIRONMENT .............................................................. 9
4.
REFERENCE DOCUMENTS ............................................................................................................. 9
4.1.
DOCUMENTS SUPPLIED BY APPLICANT ............................................................................... 9
4.2.
REFERENCE DOCUMENTS FOR TESTING ............................................................................. 9
5.
TEST RESULTS ................................................................................................................................. 10
5.1.
SUMMARY OF TEST RESULTS ................................................................................................. 10
5.2.
STATEMENTS ................................................................................................................................ 10
5.3.
TEST CONDITIONS...................................................................................................................... 10
6.
TEST FACILITIES UTILIZED .........................................................................................................11
7.
MEASUREMENT UNCERTAINTY ................................................................................................ 12
7.1.
MAXIMUM OUTPUT POWER ................................................................................................... 12
7.2.
PEAK POWER SPECTRAL DENSITY....................................................................................... 12
7.3.
DTS 6-DB SIGNAL BANDWIDTH .............................................................................................. 12
7.4.
BAND EDGES COMPLIANCE .................................................................................................... 12
7.5.
TRANSMITTER SPURIOUS EMISSION ................................................................................... 12
7.6.
AC POWER-LINE CONDUCTED EMISSION .......................................................................... 12
ANNEX A: DETAILED TEST RESULTS ................................................................................................ 13
No. I18Z62335-IOT08
Page4 of 88
A.1. MEASUREMENT METHOD............................................................................................................ 13
A.2. MAXIMUM OUTPUT POWER........................................................................................................ 14
A.2.1. PEAK OUTPUT POWER-CONDUCTED ............................................................................................... 14
A.2.2. AVERAGE OUTPUT POWER-CONDUCTED ......................................................................................... 15
A.3. PEAK POWER SPECTRAL DENSITY ........................................................................................... 17
A.4. DTS 6-DB SIGNAL BANDWIDTH .................................................................................................. 23
A.5. BAND EDGES COMPLIANCE ........................................................................................................ 29
A.6. TRANSMITTER SPURIOUS EMISSION ....................................................................................... 33
A.6.1 TRANSMITTER SPURIOUS EMISSION – CONDUCTED ........................................................................ 33
A.6.2 TRANSMITTER SPURIOUS EMISSION - RADIATED ............................................................................. 73
A.7. AC POWER-LINE CONDUCTED EMISSION .............................................................................. 84
ANNEX B: ACCREDITATION CERTIFICATE..................................................................................... 88
No. I18Z62335-IOT08
Page5 of 88
1. Test Laboratory
1.1. Testing Location
Location 1:CTTL(Huayuan North Road)
Address:
No. 52, Huayuan North Road, Haidian District, Beijing,
P. R. China100191
Location 2:CTTL(BDA)
Address:
No.18A, Kangding Street, Beijing Economic-Technology
Development Area, Beijing, P. R. China 100176
1.2. Testing Environment
Normal Temperature:
Extreme Temperature:
Relative Humidity:
15-35℃
-10/+55℃
20-75%
1.3. Project data
Testing Start Date:
Testing End Date:
2018-12-28
2019-01-22
1.4. Signature
Jiang Xue
(Prepared this test report)
Zheng Wei
(Reviewed this test report)
Gao Hong
(Approved this test report)
No. I18Z62335-IOT08
Page6 of 88
2. Client Information
2.1. Applicant Information
Company Name:
Address:
City:
Postal Code:
Country:
Telephone:
HMD Global OY
BertelJunginaukio 9,02600 ESPOO,FINLAND
ESPOO
FINLAND
Fax:
2.2. Manufacturer Information
Company Name:
Address:
City:
Postal Code:
Country:
Telephone:
Fax:
HMD Global OY
BertelJunginaukio 9,02600 ESPOO,FINLAND
ESPOO
FINLAND
No. I18Z62335-IOT08
Page7 of 88
3. Equipment Under Test (EUT) and Ancillary Equipment (AE)
3.1. About EUT
Description
Model name
FCC ID
IC ID
With WLAN Function
Frequency Range
Type of Modulation
Number of Channels
Antenna
MAX Conducted Power
Power Supply
Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN
GSM 850,900, 1800,1900 WCDMA : 1, 5, 8
LTE:1,3,5,7,8,20,28,38,40,41(120MHz)mobile
phone,
Bluetooth 4.2, WIFI 802.11 b/g/n
TA-1150
2AJOTTA-1150
Yes
ISM 2400MHz~2483.5MHz
DSSS/CCK/OFDM
11
Integral Antenna
23.51dBm
3.9VDC by Battery
3.2. Internal Identification of EUT
EUT ID*
SN or IMEI
HW Version
SW Version
EUT1
EUT2
89571_1_12
89571_1_12
00XX_1_XXX
00XX_1_XXX
*EUT ID: is used to identify the test sample in the lab internally.
3.3. Internal Identification of AE
AE ID*
AE1
AE2
AE3
AE4
AE5
AE6
Description
Battery
Battery
Charger
Charger
USB Cable
USB Cable
AE1
Model
Manufacturer
Capacitance
Nominal voltage
AE2
Model
Manufacturer
SN
Remarks
NO TEST
WT330
Jiade Energy Technology(Zhuhai) Co.,Ltd.
3000mAh
3.85V
WT330
Sunwoda Electronic Co.,Ltd
No. I18Z62335-IOT08
Page8 of 88
Capacitance
Nominal voltage
AE3
Model
Manufacturer
Length of cable
AE4
Model
Manufacturer
Length of cable
AE5
Model
Manufacturer
Length of cable
AE6
Model
Manufacturer
Length of cable
3000mAh
3.85V
CH-35U
Shenzhen Tianyin Electronics Co.,Ltd
CH-35E
Shenzhen Tianyin Electronics Co.,Ltd
CB-35A
Leagtech Electronics Co.,Ltd
CB-35A
Shenzhen BRL Technology Co.,Ltd.
*AE ID: is used to identify the test sample in the lab internally.
3.4. EUT set-ups
EUT set-up No.
Set.11
Combination of EUT and AE
EUT2+ AE1+ AE3+ AE5/AE6
Remarks
WIFI
No. I18Z62335-IOT08
Page9 of 88
3.5. General Description
The Equipment under Test (EUT) is a model of Multi-band GSM/WCDMA/LTE phone with
Bluetooth,WLAN GSM 850,900,1800,1900 WCDMA:1,5,8 LTE:1,3,5,7,8,20,28,38,40,41(120MHz)
mobile phone, Bluetooth 4.2, WIFI 802.11 b/g/n with integrated antenna and inbuilt battery.
It has Bluetooth (EDR)function.
It consists of normal options: travel charger, USB cable.
Manual and specifications of the EUT were provided to fulfil the test.
Samples undergoing test were selected by the client.
3.6. Interpretation of the Test Environment
For the test methods, the test environment uncertainty figures correspond to an expansion factor
k=2.
Measurement Uncertainty
Parameter
Uncertainty
temperature
0.48°C
humidity
2%
DC voltages
0.003V
4. Reference Documents
4.1. Documents supplied by applicant
EUT feature information is supplied by the applicant or manufacturer, which is the basis of testing.
4.2. Reference Documents for testing
The following documents listed in this section are referred for testing.
Reference
Title
FCC CFR 47, Part 15, Subpart C:
15.205 Restricted bands of operation;
15.209 Radiated emission limits, general requirements;
FCC Part15
15.247 Operation within the bands 902-928MHz,
2400-2483.5 MHz, and 5725-5850 MHz.
American National Standard of Procedures for Compliance
ANSI C63.10
Testing of Unlicensed Wireless Devices
Version
2016
2013
No. I18Z62335-IOT08
Page10 of 88
5. Test Results
5.1. Summary of Test Results
SUMMARY OF MEASUREMENT RESULTS
Sub-clause of
Part15C
Sub-clause of IC
Verdict
Maximum Peak Output Power
15.247 (b)
BR
Peak Power Spectral Density
15.247 (e)
BR
Occupied 6dB Bandwidth
15.247 (a)
BR
Band Edges Compliance
15.247 (d)
BR
Transmitter Spurious Emission - Conducted
15.247 (d)
BR
Transmitter Spurious Emission - Radiated
15.247, 15.205, 15.209
BR
AC Powerline Conducted Emission
15.107, 15.207
BR
Please refer to ANNEX A for detail.
Terms used in Verdict column
Pass, The EUT complies with the essential requirements in the standard.
NP
Not Perform, The test was not performed by CTTL
NA
Not Applicable, The test was not applicable
BR
Re-use test data from basic model report.
Fail, The EUT does not comply with the essential requirements in the
standard
5.2. Statements
The test cases as listed in section 5.1 of this report for the EUT specified in section 3 was
performed by CTTL and according to the standards or reference documents listed in section 4.2
The EUT met all requirements of the standards or reference documents, and only the WLAN
function was tested in this report.
5.3. Test Conditions
The Equipment Under Test (EUT) model TA-1150 (FCC ID: 2AJOTTA-1150) is a variant product of
TA-1157(FCC ID: 2AJOTTA-1157), according to the declaration of changes provided by the
applicant and FCC KDB publication 484596, spot check measurements were performed on this
device, all the test results are derived from test report No. I18Z62335-IOT07.
For detail differences between two models please refer the Declaration of Changes document
For this report, if the test cases listed above are tested under normal temperature and normal
voltage, and also under norm humidity, the specific condition is shown as follows:
26℃
T nom
Temperature
3.9V(By battery)
Voltage
V nom
Humidity
H nom
20-75%
No. I18Z62335-IOT08
Page11 of 88
6. Test Facilities Utilized
Conducted test system
No.
Equipment
Model
Serial
Number
Vector Signal
Analyzer
FSQ40
200089
LISN
ESH3-Z5
825562/028
Test Receiver
ESCI
100766
Shielding Room
S81
Manufacturer
Rohde &
Schwarz
Rohde &
Schwarz
Rohde &
Schwarz
ETS-Lindgren
Calibration
Period
Calibration
Due date
1 year
2019-05-17
1 year
2019-08-22
1 year
2019-04-06
Radiated emission test system
No.
Equipment
Model
Serial
Number
Manufacturer
Calibration
Period
Calibration
Due date
Test Receiver
ESU26
100376
Rohde &
Schwarz
1 year
2019-11-27
BiLog Antenna
VULB9163
9163-482
Schwarzbeck
1 year
2019-09-21
Dual-Ridge
Waveguide Horn
Antenna
3117
00139065
ETS-Lindgren
1 year
2019-11-15
Dual-Ridge
Waveguide Horn
Antenna
3116
2663
ETS-Lindgren
3 years
2020-05-31
Vector Signal
Analyzer
FSV40
101047
Rohde &
Schwarz
1 year
2019-07-27
No. I18Z62335-IOT08
Page12 of 88
7. Measurement Uncertainty
7.1. Maximum Output Power
Measurement Uncertainty: 0.387dB,k=1.96
7.2. Peak Power Spectral Density
Measurement Uncertainty: 0.705dB,k=1.96
7.3. DTS 6-dB Signal Bandwidth
Measurement Uncertainty: 60.80Hz,k=1.96
7.4. Band Edges Compliance
Measurement Uncertainty : 0.62dB,k=1.96
7.5. Transmitter Spurious Emission
Conducted
(k=1.96)
Frequency Range
Uncertainty(dB)
30MHz ≤ f ≤ 2GHz
1.22
2GHz ≤ f ≤3.6GHz
1.22
3.6GHz ≤ f ≤8GHz
1.22
8GHz ≤ f ≤12.75GHz
1.51
12.75GHz ≤ f ≤26GHz
1.51
26GHz ≤ f ≤40GHz
1.59
Radiated (k=2)
Frequency Range
Uncertainty(dB)
9kHz-30MHz
30MHz ≤ f ≤ 1GHz
5.40
1GHz ≤ f ≤18GHz
4.32
18GHz ≤ f ≤40GHz
5.26
7.6. AC Power-line Conducted Emission
Measurement Uncertainty : 3.08dB,k=2
No. I18Z62335-IOT08
Page13 of 88
ANNEX A: Detailed Test Results
A.1. Measurement Method
A.1.1. Conducted Measurements
Connect the EUT to the test system as Fig.A.1.1.1 shows.
Set the EUT to the required work mode.
Set the EUT to the required channel.
Set the Vector Signal Analyzer and start measurement.
Record the values. Vector Signal Analyzer
EUT
Vector
Signal
Analyzer
Attenuator
Shielding room
Fig.A.1.1.1: Test Setup Diagram for Conducted Measurements
A.1.2. Radiated Emission Measurements
In the case of radiated emission, the used settings are as follows,
Sweep frequency from 30 MHz to 1GHz, RBW = 100 kHz, VBW = 300 kHz;
Sweep frequency from 1 GHz to 26GHz, RBW = 1MHz, VBW = 10Hz;
Antenna
Antenna
Vector Signal
Analyzer (Test
Receiver)
EUT
Anechoic Chamber
Fig.A.1.2.1: Test Setup Diagram for Radiated Measurements
No. I18Z62335-IOT08
Page14 of 88
A.2. Maximum Output Power
Method of Measurement: See ANSI C63.10-2013-clause 11.9.1.2
a) Set the RBW = 1 MHz.
b) Set the VBW = 3 MHz.
c) Set the span ≥ [1.5 × DTS bandwidth].
d) Detector = peak.
e) Sweep time = auto couple.
f) Trace mode = max hold.
g) Allow trace to fully stabilize.
h) Use the instrument’s band/channel power measurement function with the band limits set equal
to the DTS bandwidth edges (for some instruments, this may require a manual override to select
the peak detector).
Measurement Limit:
Standard
Limit (dBm)
FCC CRF Part 15.247(b)
< 30
EUT ID: EUT2
A.2.1. Peak Output Power-conducted
Measurement Results:
802.11b/g mode
Mode
802.11b
802.11g
Data Rate
(Mbps)
Test Result (dBm)
2412MHz
(Ch1)
2437MHz
(Ch6)
2462 MHz
(Ch11)
20.08
20.28
5.5
21.75
11
23.10
22.95
22.89
23.22
23.18
12
23.05
18
22.90
24
23.38
36
23.37
48
23.35
54
23.45
23.51
23.15
The data rate 11Mbps and 54Mbps are selected as worse condition, and the following cases are
performed with this condition.
No. I18Z62335-IOT08
Page15 of 88
802.11n-HT20 mode
Mode
802.11n
(20MHz)
Data Rate
(Index)
Test Result (dBm)
2412MHz
(Ch1)
2437MHz
(Ch6)
2462 MHz
(Ch11)
MCS0
21.46
MCS1
21.23
MCS2
21.30
MCS3
21.82
MCS4
21.74
MCS5
21.86
21.73
21.38
MCS6
21.82
MCS7
21.85
The data rate MCS5 is selected as worse condition, and the following cases are performed with
this condition.
Conclusion: Pass
A.2.2. Average Output Power-conducted
Method of Measurement: See ANSI C63.10-2013-clause 11.9.2.2.2
The procedure for this method is as follows:
a) Set span = 1.5OBW.
b) Set RBW = 1MHz.
c) Set VBW = 3MHz
d) Number of points in sweep = 625
e) Sweep time = auto.
f) Detector = RMS.
g) If transmit duty cycle < 98%, use a sweep trigger with the level set to enable triggering only on
full power pulses. The transmitter shall operate at the maximum power control level for the entire
duration of every sweep. If the EUT transmits continuously (i.e., with no OFFintervals) or at duty
cycle ≥98%, and if each transmission is entirely at the maximum power control level, then the
trigger shall be set to “free run.”
h) Trace average 100 traces in power averaging (rms) mode.
i) Compute power by integrating the spectrum across the OBW of the signal using the instrument’s
band power measurement function, with band limits set equal to the OBW band edges. If the
instrument does not have a band power function, sum the spectrum levels (in power units) at
intervals equal to the RBW extending across the entire OBW of the spectrum.
No. I18Z62335-IOT08
Page16 of 88
802.11b/g mode
Mode
Test Result (dBm)
2412MHz (Ch1)
2437MHz (Ch6)
2462 MHz (Ch11)
802.11b
17.12
17.46
17.42
802.11g
15.25
15.45
15.28
802.11n-HT20 mode
Mode
802.11n (20MHz)
Conclusion: Pass
Test Result (dBm)
2412MHz (Ch1)
2437MHz (Ch6)
2462 MHz (Ch11)
13.06
13.47
13.20
No. I18Z62335-IOT08
Page17 of 88
A.3. Peak Power Spectral Density
Method of Measurement: See ANSI C63.10-2013-clause 11.10.2
a) Set analyzer center frequency to DTS channel center frequency.
b) Set the span to 1.5 times the DTS bandwidth.
c) Set the RBW to RBW = 3 kHz.
d) Set the VBW = 10 kHz.
e) Detector = peak.
f) Sweep time = auto couple.
g) Trace mode = max hold.
h) Allow trace to fully stabilize.
i) Use the peak marker function to determine the maximum amplitude level within the RBW.
Measurement Limit:
Standard
Limit
FCC CRF Part 15.247(e)
< 8 dBm/3 kHz
Measurement Results:
802.11b/g mode
Mode
802.11b
802.11g
Channel
Power Spectral Density
( dBm/3 kHz )
Conclusion
Fig.A.3.1
-5.36
Fig.A.3.2
-6.82
11
Fig.A.3.3
-6.58
Fig.A.3.4
-10.80
Fig.A.3.5
-10.54
11
Fig.A.3.6
-10.52
802.11n-HT20 mode
Mode
802.11n
(HT20)
Conclusion: Pass
Test graphs as below:
Channel
Power Spectral Density
( dBm/3 kHz )
Conclusion
Fig.A.3.7
-11.74
Fig.A.3.8
-11.75
11
Fig.A.3.9
-12.94
No. I18Z62335-IOT08
Page18 of 88
Fig.A.3.1
Fig.A.3.2
Power Spectral Density(802.11b,Ch1)
Power Spectral Density (802.11b, Ch 6)
No. I18Z62335-IOT08
Page19 of 88
Fig.A.3.3
Power Spectral Density (802.11b, Ch 11)
Fig.A.3.4
Power Spectral Density (802.11g, Ch 1)
No. I18Z62335-IOT08
Page20 of 88
Fig.A.3.5
Power Spectral Density (802.11g, Ch 6)
Fig.A.3.6
Power Spectral Density (802.11g, Ch 11)
No. I18Z62335-IOT08
Page21 of 88
Fig.A.3.7
Power Spectral Density (802.11n-HT20, Ch 1)
Fig.A.3.8
Power Spectral Density (802.11n-HT20, Ch 6)
No. I18Z62335-IOT08
Page22 of 88
Fig.A.3.9
Power Spectral Density (802.11n-HT20, Ch 11)
No. I18Z62335-IOT08
Page23 of 88
A.4. DTS 6-dB Signal Bandwidth
Method of Measurement: See ANSI C63.10-2013 section 11.8.1.
a) Set RBW = 100 kHz.
b) Set the video bandwidth (VBW) = 300 kHz.
c) Detector = Peak.
d) Trace mode = max hold.
e) Sweep = auto couple.
f) Allow the trace to stabilize.
g) Measure the maximum width of the emission that is constrained by the frequencies associated
with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6
dB relative to the maximum level measured in the fundamental emission.
Measurement Limit:
Standard
Limit (kHz)
FCC 47 CFR Part 15.247 (a)
≥ 500
EUT ID: EUT2
Measurement Result:
802.11b/g mode
Mode
Channel
802.11b
802.11g
Occupied 6dB Bandwidth
( kHz)
Fig.A.4.1
conclusion
8650.00
Fig.A.4.2
8300.00
11
Fig.A.4.3
8350.00
Fig.A.4.4
16450.00
Fig.A.4.5
16500.00
11
Fig.A.4.6
16450.00
802.11n-HT20 mode
Mode
802.11n
(HT20)
Conclusion: Pass
Test graphs as below:
Channel
Occupied 6dB Bandwidth
( kHz)
conclusion
Fig.A.4.7
17700.00
Fig.A.4.8
17700.00
11
Fig.A.4.9
17650.00
No. I18Z62335-IOT08
Page24 of 88
Fig.A.4.1
Occupied 6dB Bandwidth(802.11b,Ch 1)
Fig.A.4.2
Occupied 6dB Bandwidth (802.11b, Ch 6)
No. I18Z62335-IOT08
Page25 of 88
Fig.A.4.3
Occupied 6dB Bandwidth (802.11b, Ch 11)
Fig.A.4.4
Occupied 6dB Bandwidth (802.11g, Ch 1)
No. I18Z62335-IOT08
Page26 of 88
Fig.A.4.5
Occupied 6dB Bandwidth (802.11g, Ch 6)
Fig.A.4.6
Occupied 6dB Bandwidth (802.11g, Ch 11)
No. I18Z62335-IOT08
Page27 of 88
Fig.A.4.7
Fig.A.4.8
Occupied 6dB Bandwidth (802.11n-20MHz, Ch 1)
Occupied 6dB Bandwidth (802.11n-HT20, Ch 6)
No. I18Z62335-IOT08
Page28 of 88
Fig.A.4.9
Occupied 6dB Bandwidth (802.11n-HT20, Ch 11)
No. I18Z62335-IOT08
Page29 of 88
A.5. Band Edges Compliance
Method of Measurement: See ANSI C63.10-2013-clause 6.10.4
Connect the spectrum analyzer to the EUT using an appropriate RF cable connected to the EUT
output. Configure the spectrum analyzer settings as described below.
a) Set Span = 100MHz
b) Sweep Time: coupled
c) Set the RBW= 100 kHz
c) Set the VBW= 300 kHz
d) Detector: Peak
e) Trace: Max hold
Measurement Limit:
Standard
Limit (dBc)
FCC 47 CFR Part 15.247 (d)
> 20
EUT ID: EUT2
Measurement Result:
802.11b/g mode
Mode
802.11b
802.11g
Channel
Test Results
Fig.A.5.1
Conclusion
11
Fig.A.5.2
Fig.A.5.3
11
Fig.A.5.4
802.11n-HT20 mode
Mode
Channel
802.11n
(HT20)
Fig.A.5.5
11
Fig.A.5.6
Conclusion: Pass
Test graphs as below:
Test Results
Conclusion
No. I18Z62335-IOT08
Page30 of 88
Fig.A.5.1 Band Edges (802.11b, Ch 1)
Fig.A.5.2 Band Edges (802.11b, Ch 11)
No. I18Z62335-IOT08
Page31 of 88
Fig.A.5.3 Band Edges (802.11g, Ch 1)
Fig.A.5.4 Band Edges (802.11g, Ch 11)
No. I18Z62335-IOT08
Page32 of 88
Fig.A.5.5 Band Edges (802.11n-HT20, Ch 1)
Fig.A.5.6 Band Edges (802.11n-HT20, Ch 11)
No. I18Z62335-IOT08
Page33 of 88
A.6. Transmitter Spurious Emission
A.6.1 Transmitter Spurious Emission – Conducted
Method of Measurement: See ANSI C63.10-2013-clause 11.11.2
Establish a reference level by using the following procedure:
a) Set instrument center frequency to DTS channel center frequency
b) Set the span to ≥ 1.5 times the DTS bandwidth
c) Set the RBW= 100 kHz
d) Set the VBW= 300 kHz
e) Detector = Peak
f) Sweep time = auto couple
g) Trace mode = max hold
h) Allow trace to fully stabilize
i) Use the peak marker function to determine the maximum PSD level
Note that the channel found to contain the maximum PSD level can be used to establish the
reference level.
Establish an emission level by using the following procedure:
a) Set the center frequency and span to encompass frequency range to be measured.
b) Set the RBW = 100 kHz.
c) Set the VBW = 300 kHz.
d) Detector = peak.
e) Sweep time = auto couple.
f) Trace mode = max hold.
g) Allow trace to fully stabilize.
h) Use the peak marker function to determine the maximum amplitude level.
Ensure that the amplitude of all unwanted emissions outside of the authorized frequency band
(excluding restricted frequency bands) is attenuated by at least the minimum requirements
specified in 11.11. Report the three highest emissions relative to the limit.
Measurement Limit:
Standard
Limit
FCC 47 CFR Part 15.247 (d)
20dB below peak output power in 100 kHz
bandwidth
EUT ID: EUT2
Measurement Results:
No. I18Z62335-IOT08
Page34 of 88
802.11b mode
MODE
Channel
Frequency Range
2.412 GHz
802.11b
11
Test Results
Fig.A.6.1.1
Conclusion
30 MHz ~ 1 GHz
Fig.A.6.1.2
1 GHz ~ 2.5 GHz
Fig.A.6.1.3
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.4
7.5 GHz ~ 10 GHz
Fig.A.6.1.5
10 GHz ~ 15 GHz
Fig.A.6.1.6
15 GHz ~ 20 GHz
Fig.A.6.1.7
20 GHz ~ 26 GHz
Fig.A.6.1.8
2.437 GHz
Fig.A.6.1.9
30 MHz ~ 1 GHz
Fig.A.6.1.10
1 GHz ~ 2.5 GHz
Fig.A.6.1.11
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.12
7.5 GHz ~ 10 GHz
Fig.A.6.1.13
10 GHz ~ 15 GHz
Fig.A.6.1.14
15 GHz ~ 20 GHz
Fig.A.6.1.15
20 GHz ~ 26 GHz
Fig.A.6.1.16
2.462 GHz
Fig.A.6.1.17
30 MHz ~ 1 GHz
Fig.A.6.1.18
1 GHz ~ 2.5 GHz
Fig.A.6.1.19
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.20
7.5 GHz ~ 10 GHz
Fig.A.6.1.21
10 GHz ~ 15 GHz
Fig.A.6.1.22
15 GHz ~ 20 GHz
Fig.A.6.1.23
20 GHz ~ 26 GHz
Fig.A.6.1.24
No. I18Z62335-IOT08
Page35 of 88
802.11g mode
MODE
Channel
802.11g
11
Frequency Range
Test Results
Conclusion
2.412 GHz
Fig.A.6.1.25
30 MHz ~ 1 GHz
Fig.A.6.1.26
1 GHz ~ 2.5 GHz
Fig.A.6.1.27
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.28
7.5 GHz ~ 10 GHz
Fig.A.6.1.29
10 GHz ~ 15 GHz
Fig.A.6.1.30
15 GHz ~ 20 GHz
Fig.A.6.1.31
20 GHz ~ 26 GHz
Fig.A.6.1.32
2.437 GHz
Fig.A.6.1.33
30 MHz ~ 1 GHz
Fig.A.6.1.34
1 GHz ~ 2.5 GHz
Fig.A.6.1.35
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.36
7.5 GHz ~ 10 GHz
Fig.A.6.1.37
10 GHz ~ 15 GHz
Fig.A.6.1.38
15 GHz ~ 20 GHz
Fig.A.6.1.39
20 GHz ~ 26 GHz
Fig.A.6.1.40
2.462 GHz
Fig.A.6.1.41
30 MHz ~ 1 GHz
Fig.A.6.1.42
1 GHz ~ 2.5 GHz
Fig.A.6.1.43
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.44
7.5 GHz ~ 10 GHz
Fig.A.6.1.45
10 GHz ~ 15 GHz
Fig.A.6.1.46
15 GHz ~ 20 GHz
Fig.A.6.1.47
20 GHz ~ 26 GHz
Fig.A.6.1.48
No. I18Z62335-IOT08
Page36 of 88
802.11n-HT20 mode
MODE
Channel
802.11n
(HT20)
11
Conclusion: Pass
Test graphs as below:
Frequency Range
Test Results
Conclusion
2.412 GHz
Fig.A.6.1.49
30 MHz ~ 1 GHz
Fig.A.6.1.50
1 GHz ~ 2.5 GHz
Fig.A.6.1.51
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.52
7.5 GHz ~ 10 GHz
Fig.A.6.1.53
10 GHz ~ 15 GHz
Fig.A.6.1.54
15 GHz ~ 20 GHz
Fig.A.6.1.55
20 GHz ~ 26 GHz
Fig.A.6.1.56
2.437 GHz
Fig.A.6.1.57
30 MHz ~ 1 GHz
Fig.A.6.1.58
1 GHz ~ 2.5 GHz
Fig.A.6.1.59
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.60
7.5 GHz ~ 10 GHz
Fig.A.6.1.61
10 GHz ~ 15 GHz
Fig.A.6.1.62
15 GHz ~ 20 GHz
Fig.A.6.1.63
20 GHz ~ 26 GHz
Fig.A.6.1.64
2.462 GHz
Fig.A.6.1.65
30 MHz ~ 1 GHz
Fig.A.6.1.66
1 GHz ~ 2.5 GHz
Fig.A.6.1.67
2.5 GHz ~ 7.5 GHz
Fig.A.6.1.68
7.5 GHz ~ 10 GHz
Fig.A.6.1.69
10 GHz ~ 15 GHz
Fig.A.6.1.70
15 GHz ~ 20 GHz
Fig.A.6.1.71
20 GHz ~ 26 GHz
Fig.A.6.1.72
No. I18Z62335-IOT08
Page37 of 88
Fig.A.6.1.1
Fig.A.6.1.2
Transmitter Spurious Emission - Conducted (802.11b, Ch1, Center
Frequency)
Transmitter Spurious Emission - Conducted (802.11b, Ch1, 30 MHz-1 GHz)
No. I18Z62335-IOT08
Page38 of 88
Fig.A.6.1.3
Fig.A.6.1.4
Transmitter Spurious Emission - Conducted (802.11b, Ch1, 1 GHz-2.5 GHz)
Transmitter Spurious Emission - Conducted (802.11b, Ch1, 2.5 GHz-7.5
GHz)
No. I18Z62335-IOT08
Page39 of 88
Fig.A.6.1.5
Transmitter Spurious Emission - Conducted (802.11b, Ch1, 7.5 GHz-10
GHz)
Fig.A.6.1.6
Transmitter Spurious Emission - Conducted (802.11b, Ch1, 10 GHz-15
GHz)
No. I18Z62335-IOT08
Page40 of 88
Fig.A.6.1.7
Transmitter Spurious Emission - Conducted (802.11b, Ch1, 15 GHz-20
GHz)
Fig.A.6.1.8
Transmitter Spurious Emission - Conducted (802.11b, Ch1, 20 GHz-26
GHz)
No. I18Z62335-IOT08
Page41 of 88
Fig.A.6.1.9
Fig.A.6.1.10
Transmitter Spurious Emission - Conducted (802.11b, Ch6, Center
Frequency)
Transmitter Spurious Emission - Conducted (802.11b, Ch6, 30 MHz-1 GHz)
No. I18Z62335-IOT08
Page42 of 88
Fig.A.6.1.11
Fig.A.6.1.12
Transmitter Spurious Emission - Conducted (802.11b, Ch6, 1 GHz-2.5 GHz)
Transmitter Spurious Emission - Conducted (802.11b, Ch6, 2.5 GHz-7.5
GHz)
Download: TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Mirror Download [FCC.gov]TA-1150 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN Test Report CTTL english report HMD global Oy
Document ID4154355
Application IDsPGGT4gIFNXSGXcWnVR+vg==
Document DescriptionI18Z62335-IOT08-FCC_Report_WLAN_2.4G_Rev0_1-42
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize449.93kB (5624184 bits)
Date Submitted2019-01-30 00:00:00
Date Available2019-02-01 00:00:00
Creation Date2019-01-30 16:30:25
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2019-01-30 16:30:28
Document TitleCTTL english report
Document CreatorAcrobat PDFMaker 15 Word 版
Document Author: Xue Zhen

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2019:01:30 16:30:28+08:00
Create Date                     : 2019:01:30 16:30:25+08:00
Metadata Date                   : 2019:01:30 16:30:28+08:00
Creator Tool                    : Acrobat PDFMaker 15 Word 版
Format                          : application/pdf
Title                           : CTTL english report
Description                     : GSM test report
Creator                         : Xue Zhen
Document ID                     : uuid:24ef2619-bd00-4e7f-87a4-d88ec231b51b
Instance ID                     : uuid:19ae5659-a2db-4a62-a9ea-7d7d3228a0b8
Producer                        : Adobe PDF Library 15.0
Page Count                      : 42
Author                          : Xue Zhen
Subject                         : GSM test report