Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited

Zetta Technologies Limited HD Security Camcorder

FCC ID Filing: 2AMV7-Z18
Purchase on Amazon: HD Security Camcorder

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 2 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 3 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 4 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 5 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 6 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 7 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 8 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 9 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 10 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 11 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 12 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 13 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 14 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 15 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 16 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 17 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 18 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 19 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 20 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 21 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 22 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 23 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 24 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 25 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 26 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 27 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 28 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 29 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 30 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 31 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Page 32 of Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited

FCC PART 15.247
TEST REPORT
For
ZETTA TECHNOLOGIES LIMITED
Unit 513, No.8, Science Park west avenue, Shatin , Hong Kong
FCC ID: 2AMV7-Z18
Report Type:
Product Name:
Original Report
HD Security Camcorder
Report Number:
Report Date:
RDG170710009-00B
2017-08-30
Jerry Zhang
Reviewed By:
Test Laboratory:
EMC Manager
Bay Area Compliance Laboratories Corp. (Dongguan)
No.69 Pulongcun, Puxinhu Industry Area,
Tangxia, Dongguan, Guangdong, China
Tel: +86-769-86858888
Fax: +86-769-86858891
www.baclcorp.com.cn
Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan).
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
TABLE OF CONTENTS
GENERAL INFORMATION .......................................................................................................................................4
PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4
OBJECTIVE ...................................................................................................................................................................4
RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................4
TEST METHODOLOGY ..................................................................................................................................................4
MEASUREMENT UNCERTAINTY ....................................................................................................................................4
TEST FACILITY .............................................................................................................................................................5
SYSTEM TEST CONFIGURATION ..........................................................................................................................6
DESCRIPTION OF TEST CONFIGURATION ......................................................................................................................6
EUT EXERCISE SOFTWARE ..........................................................................................................................................6
EQUIPMENT MODIFICATIONS .......................................................................................................................................7
SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................7
EXTERNAL CABLE........................................................................................................................................................7
BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................8
SUMMARY OF TEST RESULTS ...............................................................................................................................9
FCC §15.247 (i) & §1.1310 & §2.1093- RF EXPOSURE .............................................................................................10
APPLICABLE STANDARD ............................................................................................................................................10
FCC §15.203 - ANTENNA REQUIREMENT...........................................................................................................11
APPLICABLE STANDARD ............................................................................................................................................11
ANTENNA CONNECTOR CONSTRUCTION ....................................................................................................................11
FCC §15.207 (a)– AC LINE CONDUCTED EMISSIONS ......................................................................................12
APPLICABLE STANDARD ............................................................................................................................................12
EUT SETUP ................................................................................................................................................................12
EMI TEST RECEIVER SETUP .......................................................................................................................................12
TEST PROCEDURE ......................................................................................................................................................13
CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................13
TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................13
TEST DATA ................................................................................................................................................................14
FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS.............................................................................16
APPLICABLE STANDARD ............................................................................................................................................16
EUT SETUP ................................................................................................................................................................16
EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP ..............................................................................................17
TEST PROCEDURE ......................................................................................................................................................17
CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................17
TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................18
TEST DATA ................................................................................................................................................................18
FCC §15.247(a) (2)& RSS-247 §5.2 a)–6 dB EMISSION BANDWIDTH...............................................................22
APPLICABLE STANDARD ............................................................................................................................................22
TEST PROCEDURE ......................................................................................................................................................22
TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................22
TEST DATA ................................................................................................................................................................22
FCC §15.247(b) (3) - MAXIMUM PEAK CONDUCTED OUTPUT POWER ......................................................25
APPLICABLE STANDARD ............................................................................................................................................25
TEST PROCEDURE ......................................................................................................................................................25
TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................25
FCC Part 15.247
Page 2 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
TEST DATA ................................................................................................................................................................26
FCC §15.247(d)– 100 kHz BANDWIDTH OF FREQUENCY BAND EDGE ........................................................27
APPLICABLE STANDARD ............................................................................................................................................27
TEST PROCEDURE ......................................................................................................................................................27
TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................27
TEST DATA ................................................................................................................................................................28
FCC §15.247(e) - POWER SPECTRAL DENSITY .................................................................................................30
APPLICABLE STANDARD ............................................................................................................................................30
TEST PROCEDURE ......................................................................................................................................................30
TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................30
TEST DATA ................................................................................................................................................................30
FCC Part 15.247
Page 3 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
GENERAL INFORMATION
Product Description for Equipment under Test (EUT)
The ZETTA TECHNOLOGIES LIMITED’s product, model number: Z18 (FCC ID: 2AMV7-Z18) (the
"EUT") in this report was a HD Security Camcorder, which was measured approximately: 4.2 cm (L) x
2.7 cm (W) x 2.7cm (H), rated input voltage: DC 3.7 V from battery or DC 5V from USB port.
*All measurement and test data in this report was gathered from final production sample, serial number: 170710009
(assigned by the BACL, Dongguan). The EUT was received on 2017-07-11.
Objective
This report is prepared on behalf of ZETTA TECHNOLOGIES LIMITED in accordance with Part 2,
Subpart J, Part 15, Subparts A and C of the Federal Communications Commission’s rules.
The tests were performed in order to determine the compliance of the EUT with FCC Rules Part 15Subpart C, section 15.203, 15.205, 15.207, 15.209 and 15.247 rules.
Related Submittal(s)/Grant(s)
FCC Part 15B JBP submissions with FCC ID: 2AMV7-Z18.
Test Methodology
All measurements contained in this report were conducted with ANSI C63.10-2013, American National
Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices.
All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Dongguan).
Measurement Uncertainty
Parameter
Occupied Channel Bandwidth
RF output power, conducted
Power Spectral Density, conducted
Unwanted Emissions, radiated
Unwanted Emissions
Temperature
Humidity
DC and low frequency voltages
Duty Cycle
AC Power Lines Conducted
Emission
FCC Part 15.247
Measurement Uncertainty
±5 %
±0.61dB
±0.61 dB
30M~200MHz: 4.58 dB for Horizontal, 4.59 dB for Vertical
200M~1GHz: 4.83 dB for Horizontal, 5.85 dB for Vertical
1G~6GHz: 4.45 dB, 6G~26.5GHz: 5.23 dB
±1.5 dB
±1℃
±5%
±0.4%
1%
3.12 dB (150 kHz to 30 MHz)
Page 4 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Test Facility
The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located
on the No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China
Bay Area Compliance Laboratories Corp. (Dongguan) has been accredited to ISO 17025 by CNAS(Lab
code: L5662). And accredited to ISO 17025 by NVLAP(Test Laboratory Accreditation Certificate Number
500069-0), the FCC Designation No. CN5002 under the KDB 974614 D01.
The Federal Communications Commission has the reports on file and is listed under FCC Registration No.:
273710. The test site has been approved by the FCC for public use and is listed in the FCC Public Access
Link (PAL) database.
Bay Area Compliance Laboratories Corp. (Dongguan) was registered with ISED Canada under ISED
Canada Registration Number 3062D.
FCC Part 15.247
Page 5 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
SYSTEM TEST CONFIGURATION
Description of Test Configuration
The system was configured for testing in Engineering Mode, which was provided by the manufacturer.
For Bluetooth LE mode, 40 channels are provided for testing:
…
…
Frequency
(MHz)
2402
2404
…
…
..
19
…
2440
Channel
20
…
…
…
Frequency
(MHz)
2442
…
…
…
38
39
2478
2480
Channel
EUT was tested with channel 0, 19 and 39.
EUT Exercise Software
Test software: ' FCC Python-2.7.13.exe' was used in test, the maximum power was configured by system
default setting, the test software was used for change the test modes and channels.
The duty cycle as below:
FCC Part 15.247
Ton
(ms)
Ton+off
(ms)
Duty Cycle
(%)
0.425
0.630
67.46
Minimum
Transmission
Duration (T)
(ms)
0.425
Page 6 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Equipment Modifications
No modification was made to the EUT.
Support Equipment List and Details
Manufacturer
Description
Model
Serial Number
HUAWEI
AC/DC Adapter
HW-050200C01
P78518G9V49032
External Cable
Cable Description
Shielding
Type
Ferrite Core
Length
(m)
From Port
To
USB Cable
yes
no
0.33
USB Port of Adapter
EUT
FCC Part 15.247
Page 7 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Block Diagram of Test Setup
FCC Part 15.247
Page 8 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
SUMMARY OF TEST RESULTS
FCC Rules
Description of Test
Result
§15.247 (i) & §1.1310 &
§2.1093
RF Exposure
Compliance
§15.203
Antenna Requirement
Compliance
§15.207 (a)
AC Line Conducted Emissions
Compliance
§15.205, §15.209,
§15.247(d)
Spurious Emissions
Compliance
§15.247 (a)(2)
6 dB Bandwidth
Compliance
§15.247(b)(3)
Maximum Conducted Output Power
Compliance
§15.247(d)
100 kHz Bandwidth of Frequency Band Edge
Compliance
§15.247(e)
Power Spectral Density
Compliance
FCC Part 15.247
Page 9 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
FCC §15.247 (i) & §1.1310 & §2.1093- RF EXPOSURE
Applicable Standard
According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be
operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of
the Commission’s guideline.
According to KDB447498 D01 General RF Exposure Guidance v06:
The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50
mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,
mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where
• f(GHz) is the RF channel transmit frequency in GHz
• Power and distance are rounded to the nearest mW and mm before calculation
• The result is rounded to one decimal place for comparison
• 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below
The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for
transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5
mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion.
Measurement Result
The max conducted power including tune-up tolerance is 0 dBm (1 mW).
[(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)]
= 1/5*(√2.480) = 0.3< 3.0
So the stand-alone SAR evaluation is not necessary.
FCC Part 15.247
Page 10 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
FCC §15.203 - ANTENNA REQUIREMENT
Applicable Standard
According to § 15.203, an intentional radiator shall be designed to ensure that no antenna other than that
furnished by the responsible party shall be used with the device. The use of a permanently attached
antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered
sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a
broken antenna can be replaced by the user, but the user of a standard antenna jack or electrical connector
is prohibited. The structure and application of the EUT were analyzed to determine compliance with
section §15.203 of the rules. §15.203 state that the subject device must meet the following criteria:
a. Antenna must be permanently attached to the unit.
b. Antenna must use a unique type of connector to attach to the EUT.
c. Unit must be professionally installed, and installer shall be responsible for verifying that the correct
antenna is employed with the unit.
Antenna Connector Construction
The EUT has one internal antenna arrangement for BT, and the antenna gain is 3.5 dBi, fulfill the
requirement of this section. Please refer to the EUT photos.
Result: Compliance.
FCC Part 15.247
Page 11 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
FCC §15.207 (a)– AC LINE CONDUCTED EMISSIONS
Applicable Standard
FCC§15.207(a)
EUT Setup
The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification
used was with the FCC Part 15.207.
The spacing between the peripherals was 10 cm.
The adapter was connected to the main LISN with a 120 V/60 Hz AC power source.
EMI Test Receiver Setup
The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz.
During the conducted emission test, the EMI test receiver was set with the following configurations:
FCC Part 15.247
Frequency Range
IF B/W
150 kHz – 30 MHz
9 kHz
Page 12 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Test Procedure
During the conducted emission test, the adapter was connected to the first LISN.
Maximizing procedure was performed on the six (6) highest emissions of the EUT.
All data was recorded in the Quasi-peak and average detection mode.
Corrected Amplitude & Margin Calculation
The basic equation is as follows:
VC = VR + AC + VDF
Cf = AC + VDF
Herein,
VC (cord. Reading): corrected voltage amplitude
VR: reading voltage amplitude
Ac: attenuation caused by cable loss
VDF: voltage division factor of AMN
Cf: Correction Factor
The “Margin” column of the following data tables indicates the degree of compliance within the
applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation
for margin calculation is as follows:
Margin = Limit – Corrected Amplitude
Test Equipment List and Details
Manufacturer
Description
Model
Serial Number
Calibration
Date
Calibration
Due Date
R&S
EMI Test Receiver
ESCS 30
830245/006
2016-12-08
2017-12-08
R&S
L.I.S.N
ESH2-Z5
892107/021
2016-09-01
2017-09-01
R&S
Two-line V-network
ENV 216
3560.6550.12
2016-12-08
2017-12-08
R&S
Test Software
EMC32
Version8.53.0
N/A
N/A
Unknown
Coaxial Cable
2m
Con-1
2016-09-01
2017-09-01
* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have
been performed, traceable to National Primary Standards and International System of Units (SI).
FCC Part 15.247
Page 13 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Test Data
Environmental Conditions
27.0 C
Temperature:
51 %
Relative Humidity:
100.3 kPa
ATM Pressure:
The testing was performed by Gaochao Gong on 2017-08-28.
Test Mode: Transmitting
AC120 V, 60 Hz, Line:
80
70
Quasi-Peak Limit
60
Average Limit
Level in dBμ
50
40
30
20
10
150k
300
400 500
800 1M
2M
3M
4M 5M 6
8 10M
20M
30M
Frequency in Hz
Frequency
(MHz)
0.198249
QuasiPeak
(dBμV)
29.1
Bandwidth
(kHz)
9.000
L1
Corr.
(dB)
10.6
Margin
(dB)
34.6
Limit
(dBμV)
63.7
Compliance
0.223418
28.1
0.230654
28.4
9.000
L1
10.5
34.6
62.7
Compliance
9.000
L1
10.4
34.0
62.4
Compliance
0.249785
28.1
9.000
L1
10.3
33.7
61.8
Compliance
0.991374
27.3
9.000
L1
9.8
28.7
56.0
Compliance
2.906762
23.6
9.000
L1
9.8
32.4
56.0
Compliance
Frequency
(MHz)
0.515791
Average
(dBμV)
16.0
Bandwidth
(kHz)
9.000
L1
Corr.
(dB)
9.9
Margin
(dB)
30.0
Limit
(dBμV)
46.0
Compliance
0.852094
16.2
9.000
L1
9.8
29.8
46.0
Compliance
1.190776
20.4
9.000
L1
9.7
25.6
46.0
Compliance
2.930016
16.7
9.000
L1
9.8
29.3
46.0
Compliance
3.519348
18.4
9.000
L1
9.8
27.6
46.0
Compliance
3.997889
16.1
9.000
L1
9.8
29.9
46.0
Compliance
FCC Part 15.247
Line
Line
Comment
Comment
Page 14 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
AC120 V, 60 Hz, Neutral:
80
70
Quasi-Peak Limit
60
Average Limit
Level in dBμ
50
40
30
20
10
150k
300
400 500
800 1M
2M
3M
4M 5M 6
8 10M
20M
30M
Frequency in Hz
Frequency
(MHz)
0.232499
QuasiPeak
(dBμV)
30.6
Bandwidth
(kHz)
9.000
Corr.
(dB)
10.4
Margin
(dB)
31.8
Limit
(dBμV)
62.4
Compliance
0.259937
31.0
0.297644
33.3
9.000
10.3
30.4
61.4
Compliance
9.000
10.1
27.0
60.3
Compliance
0.307284
32.0
9.000
10.1
28.0
60.0
Compliance
1.190776
30.7
9.000
9.7
25.3
56.0
Compliance
1.310256
31.9
9.000
9.7
24.1
56.0
Compliance
Frequency
(MHz)
0.227007
Average
(dBμV)
20.1
Bandwidth
(kHz)
9.000
Corr.
(dB)
10.4
Margin
(dB)
32.5
Limit
(dBμV)
52.6
Compliance
0.304845
19.1
9.000
10.1
31.0
50.1
Compliance
0.327509
19.0
9.000
10.1
30.5
49.5
Compliance
1.239175
18.7
9.000
9.7
27.3
46.0
Compliance
1.279307
17.7
9.000
9.7
27.3
46.0
Compliance
5.631624
19.1
9.000
9.8
30.9
50.0
Compliance
FCC Part 15.247
Line
Line
Comment
Comment
Page 15 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS
Applicable Standard
FCC §15.247 (d); §15.209; §15.205;
EUT Setup
Below 1GHz:
Above 1GHz:
The radiated emission tests were performed in the 3 meters distance, using the setup accordance with the
ANSI C63.10-2013. The specification used was the FCC 15.209, and FCC 15.247 limits.
The spacing between the peripherals was 10 cm.
FCC Part 15.247
Page 16 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
EMI Test Receiver & Spectrum Analyzer Setup
The system was investigated from 30 MHz to 25 GHz.
During the radiated emission test, the EMI test receiver & Spectrum Analyzer Setup were set with the
following configurations:
30MHz-1000MHz:
Detector
QP
RBW
120 kHz
Video B/W
300 kHz
IF B/W
120kHz
1GHz- 25GHz:
Detector
PK
Ave.
Duty cycle
Any
>98%
<98%
RBW
1MHz
1MHz
1MHz
Video B/W
3 MHz
10 Hz
1/T
Note: T is minimum transmission duration
Test Procedure
Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all
installation combinations.
Data was recorded in Quasi-peak detection mode for frequency range of 30 MHz-1 GHz, peak and
Average detection modes for frequencies above 1 GHz.
Corrected Amplitude & Margin Calculation
The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the
Amplifier Gain from the Meter Reading. The basic equation is as follows:
Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain
The “Margin” column of the following data tables indicates the degree of compliance with the applicable
limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin
calculation is as follows:
Margin = Limit – Corrected Amplitude
FCC Part 15.247
Page 17 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Test Equipment List and Details
ESCI
Serial
Number
100224
Calibration
Date
2016-09-01
Calibration
Due Date
2017-08-31
Antenna
JB3
A060611-1
2014-11-06
2017-11-05
Amplifier
Spectrum Analyzer
Horn Antenna
8447E
E4440A
3115
2016-09-01
2016-12-08
2016-01-05
2017-09-01
2017-12-08
2019-01-04
Horn Antenna
ARH-4223-02
2434A02181
SG43360054
000 527 35
1007726-02
1304
2017-06-16
2020-06-15
2001271
2016-09-05
2017-09-05
15964001001
4m
0.75m
10m
8m
V1.1.4.2
2016-09-06
2016-09-01
2016-09-01
2016-09-01
2016-09-01
N/A
2017-09-06
2017-09-01
2017-09-01
2017-09-01
2017-09-01
N/A
Manufacturer
Description
Model
R&S
Sunol
Sciences
HP
Agilent
ETS-Lindgren
Ducommun
Technolagies
EMI Test Receiver
MITEQ
Amplifier
Quinstar
Unknown
Unknown
Unknown
Unknown
Amplifier
Coaxial Cable
Coaxial Cable
Coaxial Cable
Coaxial Cable
Test Software
Farad
AFS42-0010180025-S-42
QLW-18405536-JO
Chamber A-1
Chamber B-1
Chamber A-2
Chamber B-2
EZ-EMC
* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have
been performed, traceable to National Primary Standards and International System of Units (SI).
Test Data
Environmental Conditions
Temperature:
Relative Humidity:
ATM Pressure:
28.6 C
46 %
100 kPa
The testing was performed by Tony Zeng on 2017-08-26.
Test Result: Compliance, please Refer to the following data
Test Mode: Transmitting
FCC Part 15.247
Page 18 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
1) 30MHz-1GHz(Middle channel was the worst)
Horizontal:
Frequency
(MHz)
30.9700
56.1900
117.3000
288.9900
361.7400
425.7600
FCC Part 15.247
Receiver
Reading
(dBuV)
24.75
43.75
25.39
24.18
25.66
25.41
Detector
QP
QP
QP
QP
QP
QP
Correction
Factor
(dB/m)
0.35
-12.45
-4.99
-4.08
-3.06
-2.01
Cord.
Amp.
(dBuV/m)
25.10
31.30
20.40
20.10
22.60
23.40
Limit
(dBuV/m)
Margin
(dB)
40.00
40.00
43.50
46.00
46.00
46.00
14.90
8.70
23.10
25.90
23.40
22.60
Page 19 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Vertical:
Frequency
(MHz)
Receiver
Reading
(dBuV)
Detector
Correction
Factor
(dB/m)
Cord.
Amp.
(dBuV/m)
Limit
(dBuV/m)
Margin
(dB)
31.9400
40.6700
61.0400
117.3000
361.7400
477.1700
31.05
30.21
37.43
24.19
25.56
25.22
QP
QP
QP
QP
QP
QP
-0.35
-6.91
-12.33
-4.99
-3.06
-1.02
30.70
23.30
25.10
19.20
22.50
24.20
40.00
40.00
40.00
43.50
46.00
46.00
9.30
16.70
14.90
24.30
23.50
21.80
FCC Part 15.247
Page 20 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
2) 1-25GHz:
Frequency
(MHz)
Receiver
Reading
Detector
(dBμV) (PK/QP/AV)
2402
2402
2402
2402
2390
2390
4804
4804
7206
7206
2568
2568
61.78
41.09
61.28
41.02
24.41
11.92
45.67
32.33
45.52
32.21
45.92
32.86
PK
AV
PK
AV
PK
AV
PK
AV
PK
AV
PK
AV
2440
2440
2440
2440
4880
4880
7320
7320
2996
2996
62.16
42.52
62.34
42.61
45.39
32.53
45.69
32.52
45.68
32.64
PK
AV
PK
AV
PK
AV
PK
AV
PK
AV
2480
2480
2480
2480
2483.5
2483.5
4960
4960
7440
7440
2851
2851
61.32
41.92
60.12
40.74
25.26
12.23
45.52
32.26
45.58
32.22
45.59
32.37
PK
AV
PK
AV
PK
AV
PK
AV
PK
AV
PK
AV
FCC Part 15.247
Rx Antenna
Polar Factor
(H/V)
(dB)
Cable
loss
(dB)
Amplifier
Gain
(dB)
Low Channel: 2402 MHz
28.10
3.11
0.00
28.10
3.11
0.00
28.10
3.11
0.00
28.10
3.11
0.00
28.08
3.10
0.00
28.08
3.10
0.00
32.91
4.30
35.48
32.91
4.30
35.48
35.74
5.45
35.97
35.74
5.45
35.97
28.54
3.10
35.44
28.54
3.10
35.44
Middle Channel: 2440 MHz
28.18
3.11
0.00
28.18
3.11
0.00
28.18
3.11
0.00
28.18
3.11
0.00
33.06
4.40
35.54
33.06
4.40
35.54
36.03
5.52
35.98
36.03
5.52
35.98
30.09
3.42
35.31
30.09
3.42
35.31
High Channel: 2480 MHz
28.26
3.10
0.00
28.26
3.10
0.00
28.26
3.10
0.00
28.26
3.10
0.00
28.27
3.10
0.00
28.27
3.10
0.00
33.22
4.42
35.60
33.22
4.42
35.60
36.34
5.60
35.99
36.34
5.60
35.99
29.56
3.31
35.35
29.56
3.31
35.35
Corrected
Amplitude
(dBμV/m)
Limit
(dBμV/m)
Margin
(dB)
92.99
72.30
92.49
72.23
55.59
43.10
47.40
34.06
50.74
37.43
42.12
29.06
N/A
N/A
N/A
N/A
74.00
54.00
74.00
54.00
74.00
54.00
74.00
54.00
N/A
N/A
N/A
N/A
18.41
10.90
26.60
19.94
23.26
16.57
31.88
24.94
93.45
73.81
93.63
73.90
47.31
34.45
51.26
38.09
43.88
30.84
N/A
N/A
N/A
N/A
74.00
54.00
74.00
54.00
74.00
54.00
N/A
N/A
N/A
N/A
26.69
19.55
22.74
15.91
30.12
23.16
92.68
73.28
91.48
72.10
56.63
43.60
47.56
34.30
51.53
38.17
43.11
29.89
N/A
N/A
N/A
N/A
74.00
54.00
74.00
54.00
74.00
54.00
74.00
54.00
N/A
N/A
N/A
N/A
17.37
10.40
26.44
19.70
22.47
15.83
30.89
24.11
Page 21 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
FCC §15.247(a) (2)& RSS-247 §5.2 a)–6 dB EMISSION BANDWIDTH
Applicable Standard
According to FCC §15.247(a) (2)
Systems using digital modulation techniques may operate in the 902–928 MHz, 2400–2483.5 MHz, and
5725–5850 MHz bands. The minimum 6 dB bandwidth shall be at least 500 kHz.
Test Procedure
a) Set RBW = 100 kHz.
b) Set the video bandwidth (VBW) ≥ 3×RBW.
c) Detector = Peak.
d) Trace mode = max hold.
e) Sweep = auto couple.
f) Allow the trace to stabilize.
g) Measure the maximum width of the emission that is constrained by the frequencies associated with the
two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the
maximum level measured in the fundamental emission.
Test Equipment List and Details
Manufacturer
Description
Model
Serial Number
Calibration
Date
Calibration
Due Date
R&S
EMI Test Receiver
ESPI
100120
2016-12-08
2017-12-08
Unknown
RF Cable
Unknown
C-5
Each Time
* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have
been performed, traceable to National Primary Standards and International System of Units (SI).
Test Data
Environmental Conditions
Temperature:
Relative Humidity:
ATM Pressure:
26.7 C
52 %
100.1 kPa
* The testing was performed by Calvin Chen on 2017-08-24.
FCC Part 15.247
Page 22 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Test Mode: Transmitting
Test Result: Compliant. Please refer to the following table and plots.
Channel
Frequency
(MHz)
Low
Middle
High
2402
2440
2480
6 dB Emission
Bandwidth
(MHz)
0.67
0.68
0.67
Limit
(MHz)
≥0.5
≥0.5
≥0.5
6dB Bandwidth:
Low Channel
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
20 dB
SWT 2.5 ms
1 dB
D1 -2.85 dBm
1 PK
MAXH
-10
D2 -8.85 dBm
Delta 1 [T1 ]
0.05 dB
672.000000000 kHz
Marker 1 [T1 ]
-8.88
2.401660000
Marker 2 [T1 ]
-2.85
2.402004000
dBm
GHz
dBm
GHz LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
Date:
FCC Part 15.247
24.AUG.2017
200 kHz/
Span 2 MHz
20:55:33
Page 23 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Middle Channel
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
20 dB
SWT 2.5 ms
1 dB
1 PK
MAXH
D1 -1.09 dBm
D2 -7.09 dBm
-10
Delta 1 [T1 ]
0.15 dB
676.000000000 kHz
Marker 1 [T1 ]
-7.25
2.439656000
Marker 2 [T1 ]
-1.09
2.440000000
dBm
GHz
dBm
GHz LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.44 GHz
Date:
24.AUG.2017
200 kHz/
Span 2 MHz
20:57:02
High Channel
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
1 PK
MAXH
20 dB
SWT 2.5 ms
1 dB
D1 -3.42 dBm
-10
D2 -9.42 dBm
Delta 1 [T1 ]
0.10 dB
672.000000000 kHz
Marker 1 [T1 ]
-9.52
2.479656000
Marker 2 [T1 ]
-3.42
2.480008000
dBm
GHz
dBm
GHz LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.48 GHz
Date:
FCC Part 15.247
24.AUG.2017
200 kHz/
Span 2 MHz
20:58:16
Page 24 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
FCC §15.247(b) (3) - MAXIMUM PEAK CONDUCTED OUTPUT POWER
Applicable Standard
According to FCC §15.247(b) (3), for systems using digital modulation in the 902-928 MHz, 2400-2483.5
MHz, and 5725-5850 MHz bands: 1 Watt. As an alternative to a peak power measurement, compliance
with the one Watt limit can be based on a measurement of the maximum conducted output power.
Maximum Conducted Output Power is defined as the total transmit power delivered to all antennas and
antenna elements averaged across all symbols in the signaling alphabet when the transmitter is operating at
its maximum power control level. Power must be summed across all antennas and antenna elements. The
average must not include any time intervals during which the transmitter is off or is transmitting at a
reduced power level. If multiple modes of operation are possible (e.g., alternative modulation methods),
the maximum conducted output power is the highest total transmit power occurring in any mode.
Test Procedure
1. Place the EUT on a bench and set it in transmitting mode.
2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to test
equipment.
3. Add a correction factor to the display.
4. Set the power Meter to test Peak output power, record the result as peak power.
5. Set the power meter to test average output power, record the result as average power.
Power
Meter
EUT
Test Equipment List and Details
Manufacturer
Description
Model
Serial
Number
Calibration
Date
Calibration
Due Date
Agilent
Wideband Power
Sensor
N1921A
MY54210016
2016-11-03
2017-11-03
Agilent
P-Series Power Meter
N1912A
MY5000448
2016-11-03
2017-11-03
Unknown
RF Cable
Unknown
C-5
Each Time
* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have
been performed, traceable to National Primary Standards and International System of Units (SI).
FCC Part 15.247
Page 25 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Test Data
Environmental Conditions
Temperature:
Relative Humidity:
ATM Pressure:
26.7 C
52 %
100.1 kPa
The testing was performed by Calvin Chen on 2017-08-24.
Test Mode: Transmitting
FCC Part 15.247
Channel
Frequency
(MHz)
Low
Middle
High
2402
2440
2480
Conducted
Peak Output
Power
(dBm)
-2.36
-0.62
-2.91
Limit
(dBm)
30
30
30
Page 26 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
FCC §15.247(d)– 100 kHz BANDWIDTH OF FREQUENCY BAND EDGE
Applicable Standard
According to FCC§15.247(d):In any 100 kHz bandwidth outside the frequency band in which the spread
spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is
produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the
band that contains the highest level of the desired power, based on either an RF conducted or a radiated
measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If
the transmitter complies with the conducted power limits based on the use of RMS averaging over a time
interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph
shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not
required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must
also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)).
Test Procedure
1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal
from an external generator.
2. Position the EUT without connection to measurement instrument. Turn on the EUT and connect its
antenna terminal to measurement instrument via a low loss cable. Then set it to any one measured
frequency within its operating range, and make sure the instrument is operated in its linear range.
3. Set RBW to 100 kHz and VBW of spectrum analyzer to 300 kHz with a convenient frequency span
including 100 kHz bandwidth from band edge.
4. Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the
graph with marking the highest point and edge frequency.
5. Repeat above procedures until all measured frequencies were complete.
Test Equipment List and Details
Manufacturer
Description
Model
Serial
Number
Calibration
Date
Calibration
Due Date
R&S
EMI Test Receiver
ESPI
100120
2016-12-08
2017-12-08
Unknown
RF Cable
Unknown
C-5
Each Time
* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have
been performed, traceable to National Primary Standards and International System of Units (SI).
FCC Part 15.247
Page 27 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Test Data
Environmental Conditions
Temperature:
Relative Humidity:
ATM Pressure:
26.7 C
52 %
100.1 kPa
* The testing was performed by Calvin Chen on 2017-08-24.
Test mode: Transmitting
Test Result: Compliant. Please refer to following plots.
FCC Part 15.247
Page 28 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Band Edge, Left Side
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
20 dB
SWT 2.5 ms
1 dB
Marker 1 [T1 ]
-2.82 dBm
1 2.402016000 GHz
1 PK
MAXH
Marker 2 [T1 ]
-56.05 dBm
2.399984000 GHz
-10
LVL
-20
-22.82dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.4 GHz
Date:
800 kHz/
24.AUG.2017
Span 8 MHz
20:56:24
Band Edge, Right Side
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
20 dB
SWT 2.5 ms
1 dB
-23.29dBm
1 PK
MAXH
Marker 2 [T1 ]
-58.51 dBm
2.487532000 GHz
Marker 1 [T1 ]
-3.29 dBm
2.480000000 GHz
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.4835 GHz
Date:
FCC Part 15.247
24.AUG.2017
1.4 MHz/
Span 14 MHz
20:59:05
Page 29 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
FCC §15.247(e) - POWER SPECTRAL DENSITY
Applicable Standard
For digitally modulated systems, the power spectral density conducted from the intentional radiator to the
antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous
transmission. This power spectral density shall be determined in accordance with the provisions of
paragraph (b) of this section. The same method of determining the conducted output power shall be used to
determine the power spectral density.
Test Procedure
1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal
from an external generator.
2. Position the EUT was set without connection to measurement instrument. Turn on the EUT and
connect its antenna terminal to measurement instrument via a low loss cable. Then set it to any one
measured frequency within its operating range, and make sure the instrument is operated in its linear
range.
3. Set the RBW = 3 kHz, VBW = 10 kHz, Set the span to 1.5 times the DTS bandwidth.
4. Use the peak marker function to determine the maximum amplitude level.
Test Equipment List and Details
Manufacturer
Description
Model
Serial
Number
Calibration
Date
Calibration
Due Date
R&S
EMI Test Receiver
ESPI
100120
2016-12-08
2017-12-08
Unknown
RF Cable
Unknown
C-5
Each Time
* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations
have been performed, traceable to National Primary Standards and International System of Units (SI).
Test Data
Environmental Conditions
Temperature:
Relative Humidity:
ATM Pressure:
26.7 C
52 %
100.1 kPa
The testing was performed by Calvin Chen on 2017-08-24.
FCC Part 15.247
Page 30 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Test Result: Compliance
Test Mode: Transmitting
Channel
Frequency
(MHz)
PSD
(dBm/3kHz)
Limit
(dBm/3kHz)
Low
Middle
High
2402
2440
2480
-18.37
-16.71
-18.83
≤8
≤8
≤8
Please refer to the following plots
Power Spectral Density, Low Channel
* RBW 3 kHz
* VBW 10 kHz
Ref
10
* Att
10 dBm
Offset
20 dB
SWT 115 ms
Marker 1 [T1 ]
-18.37 dBm
2.401973870 GHz
1 dB
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
Date:
FCC Part 15.247
24.AUG.2017
100.5 kHz/
Span 1.005 MHz
20:56:06
Page 31 of 32
Bay Area Compliance Laboratories Corp. (Dongguan)
Report No.: RDG170710009-00B
Power Spectral Density, Middle Channel
* RBW 3 kHz
* VBW 10 kHz
Ref
10
* Att
10 dBm
Offset
20 dB
SWT 115 ms
Marker 1 [T1 ]
-16.71 dBm
2.439973480 GHz
1 dB
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.44 GHz
Date:
24.AUG.2017
102 kHz/
Span 1.02 MHz
20:57:34
Power Spectral Density, High Channel
* RBW 3 kHz
* VBW 10 kHz
Ref
10
* Att
10 dBm
Offset
20 dB
SWT 115 ms
Marker 1 [T1 ]
-18.83 dBm
2.479973870 GHz
1 dB
1 PK
MAXH
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.48 GHz
Date:
24.AUG.2017
100.5 kHz/
Span 1.005 MHz
20:58:48
***** END OF REPORT *****
FCC Part 15.247
Page 32 of 32
Download: Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Mirror Download [FCC.gov]Z18 HD Security Camcorder Test Report RDG170710009-00B_BLE Report Zetta Technologies Limited
Document ID3557908
Application IDaayVpuKaMo356uzneZR0Jg==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize40.4kB (504947 bits)
Date Submitted2017-09-12 00:00:00
Date Available2017-09-12 00:00:00
Creation Date2017-09-11 18:36:25
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2017-09-11 18:37:10
Document TitleRDG170710009-00B_BLE Report
Document CreatorPScript5.dll Version 5.2.2
Document Author: DG06181

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : DG06181
Create Date                     : 2017:09:11 18:36:25+08:00
Modify Date                     : 2017:09:11 18:37:10+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Microsoft Word - RDG170710009-00B_BLE Report
Creator                         : DG06181
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:09:11 18:37:10+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:4a22bce4-926a-44f8-94bb-94c1c3783e99
Instance ID                     : uuid:2a874b05-9b24-46e8-8f2e-5379a44581a6
Page Count                      : 32

Facebook Twitter Google+ RSS © FCCID.io 2017