F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus

Saygus Saygus smartphone V-Squared

Page 1 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 2 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 3 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 4 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 5 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 6 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 7 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 8 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 9 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 10 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 11 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 12 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 13 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 14 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 15 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 16 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 17 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 18 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 19 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 20 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 21 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 22 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 23 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 24 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 25 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 26 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 27 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 28 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 29 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 30 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 31 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 32 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 33 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 34 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 35 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 36 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 37 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 38 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 39 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 40 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 41 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 42 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 43 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 44 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 45 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 46 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 47 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 48 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 49 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 50 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 51 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 52 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 53 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 54 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 55 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 56 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 57 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 58 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 59 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 60 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 61 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 62 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 63 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 64 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 65 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 66 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 67 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 68 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 69 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 70 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 71 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 72 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 73 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 74 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 75 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 76 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 77 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 78 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 79 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 80 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 81 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 82 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 83 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 84 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 85 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 86 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 87 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 88 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 89 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 90 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 91 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 92 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 93 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 94 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 95 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 96 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 97 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 98 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 99 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 100 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 101 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 102 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 103 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 104 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 105 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 106 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 107 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 108 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 109 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 110 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 111 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 112 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 113 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 114 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 115 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 116 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 117 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 118 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 119 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 120 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 121 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 122 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 123 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 124 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 125 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 126 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 127 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 128 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 129 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 130 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 131 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 132 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 133 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Page 134 of F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen,
Guangdong, China 518057
Telephone:
+86 (0) 755 2601 2053
Fax:
+86 (0) 755 2671 0594
Email:
ee.shenzhen@sgs.com
Report No.: SZEM171001110307
Page
: 1 of 117
FCC SAR TEST REPORT
Application No:
SZEM1710011103RG
Applicant:
Saygus
Manufacturer:
Saygus
Factory:
Smart Gadgets (Shenzhen) , LTD
Product Name:
Saygus smartphone V-Squared
Model No.(EUT):
SG02
Trade Mark:
Saygus
FCC ID:
2ANBZ-F10104216
Standards:
FCC 47CFR §2.1093
Date of Receipt:
2017-12-05
Date of Test:
2017-12-06 to 2017-12-28
Date of Issue:
2018-01-14
Test conclusion:
PASS *
In the configuration tested, the EUT detailed in this report complied with the standards specified above.
Authorized Signature:
Derek Yang
Wireless Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system
complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical
Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical
Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
2 of 117
REVISION HISTORY
Revision Record
Version
01
Chapter
Date
2018-01-14
Modifier
Remark
Original
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
3 of 117
TEST SUMMARY
Maximum Reported SAR(W/kg)
Frequency Band
Head
Body-worn
Hotspot
GSM850
<0.10
<0.10
0.16
GSM1900
<0.10
0.28
1.45
WCDMA Band II
<0.10
0.17
0.29
WCDMA Band IV
<0.10
0.14
0.50
WCDMA Band V
<0.10
<0.10
<0.10
CDMA BC0
<0.10
<0.10
<0.10
CDMA BC1
<0.10
0.12
0.49
LTE Band 2
<0.10
0.32
0.97
LTE Band 4
0.11
0.22
0.79
LTE Band 5
<0.10
<0.10
<0.10
LTE Band 7
0.21
0.10
0.33
LTE Band 12
<0.10
<0.10
<0.10
LTE Band 13
<0.10
<0.10
<0.10
LTE Band 17
<0.10
<0.10
<0.10
LTE Band 25
<0.10
0.25
0.96
LTE Band 38
<0.10
<0.10
0.20
LTE Band 41
0.14
<0.10
0.19
WI-FI (2.4GHz)
<0.10
<0.10
<0.10
0.52
<0.10
0.10
WI-FI (5GHz)
SAR Limited(W/kg)
1.6
Maximum Simultaneous Transmission SAR (W/kg)
Scenario
Head
Sum SAR
0.66
0.34
1.45
SPLSR
NA
NA
NA
SPLSR Limited
Body-worn
Hotspot
0.04
Approved & Released by
Tested by
Simon Ling
Gavin Gao
SAR Manager
SAR Engineer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
4 of 117
CONTENTS
GENERAL INFORMATION ................................................................................................................................. 7
1.1
DETAILS OF CLIENT .................................................................................................................................................7
1.2
TEST LOCATION .......................................................................................................................................................7
1.3
TEST FACILITY .........................................................................................................................................................8
1.4
GENERAL DESCRIPTION OF EUT ............................................................................................................................9
1.5
TEST SPECIFICATION ............................................................................................................................................ 11
1.6
RF EXPOSURE LIMITS ........................................................................................................................................... 11
SAR MEASUREMENTS SYSTEM CONFIGURATION ................................................................................... 12
2.1
THE SAR MEASUREMENT SYSTEM ..................................................................................................................... 12
2.2
ISOTROPIC E-FIELD PROBE EX3DV4 .................................................................................................................. 13
2.3
DATA ACQUISITION ELECTRONICS (DAE)........................................................................................................... 14
2.4
SAM TWIN PHANTOM .......................................................................................................................................... 14
2.5
ELI PHANTOM ....................................................................................................................................................... 15
2.6
DEVICE HOLDER FOR TRANSMITTERS ................................................................................................................. 16
2.7
MEASUREMENT PROCEDURE................................................................................................................................ 17
2.7.1
Scanning procedure ...................................................................................................................................... 17
2.7.2
Data Storage .................................................................................................................................................. 19
2.7.3
Data Evaluation by SEMCAD ...................................................................................................................... 19
DESCRIPTION OF TEST POSITION ............................................................................................................... 21
3.1
3.1.1
SAM Phantom Shape ................................................................................................................................... 21
3.1.2
EUT constructions ......................................................................................................................................... 22
3.1.3
Definition of the “cheek” position ................................................................................................................. 22
3.1.4
Definition of the “tilted” position ................................................................................................................... 23
3.2
THE HEAD TEST POSITION ................................................................................................................................... 21
THE BODY TEST POSITION ................................................................................................................................... 24
3.2.1
Body-worn accessory exposure conditions ............................................................................................... 24
3.2.2
Wireless Router exposure conditions ......................................................................................................... 25
SAR SYSTEM VERIFICATION PROCEDURE ................................................................................................ 26
4.1
TISSUE SIMULATE LIQUID..................................................................................................................................... 26
4.1.1
Recipes for Tissue Simulate Liquid ............................................................................................................ 26
4.1.2
Measurement for Tissue Simulate Liquid .................................................................................................. 27
4.2
SAR SYSTEM CHECK ........................................................................................................................................... 28
4.2.1
Justification for Extended SAR Dipole Calibrations ................................................................................. 29
4.2.2
Summary System Check Result(s) ............................................................................................................. 30
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
5 of 117
4.2.3
Detailed System Validation Results ........................................................................................................... 30
TEST RESULTS AND MEASUREMENT DATA .............................................................................................. 31
5.1
3G SAR TEST REDUCTION PROCEDURE ............................................................................................................ 31
5.2
OPERATION CONFIGURATIONS ............................................................................................................................ 31
5.2.1
GSM Test Configuration ............................................................................................................................... 31
5.2.2
WCDMA Test Configuration......................................................................................................................... 32
5.2.3
CDMA Test Configuration ............................................................................................................................ 36
5.2.4
WiFi Test Configuration ................................................................................................................................ 37
5.2.5
LTE Test Configuration ................................................................................................................................. 43
5.2.6
DUT Antenna Locations ............................................................................................................................... 46
5.2.7
EUT side for SAR Testing ............................................................................................................................ 47
5.2.8
Stand-alone SAR test evaluation ................................................................................................................ 48
5.3
MEASUREMENT OF RF CONDUCTED POWER ....................................................................................................... 49
5.3.1
Conducted Power Of GSM........................................................................................................................... 49
5.3.2
Conducted Power Of WCDMA .................................................................................................................... 51
5.3.3
Conducted Power Of CDMA ........................................................................................................................ 52
5.3.4
Conducted Power Of LTE ............................................................................................................................ 53
5.3.5
Conducted Power Of WIFI and BT ............................................................................................................. 71
5.4
MEASUREMENT OF SAR DATA ............................................................................................................................ 73
5.4.1
SAR Result Of GSM850 ............................................................................................................................... 73
5.4.2
SAR Result Of GSM1900 ............................................................................................................................. 75
5.4.3
SAR Result Of WCDMA Band 2 ................................................................................................................. 77
5.4.4
SAR Result Of WCDMA Band 4 ................................................................................................................. 78
5.4.1
SAR Result Of WCDMA Band 5 ................................................................................................................. 79
5.4.2
SAR Result Of CDMA BC0 .......................................................................................................................... 80
5.4.3
SAR Result Of CDMA BC1 .......................................................................................................................... 81
5.4.4
SAR Result Of LTE Band 2.......................................................................................................................... 82
5.4.1
SAR Result Of LTE Band 4.......................................................................................................................... 84
5.4.2
SAR Result Of LTE Band 5.......................................................................................................................... 86
5.4.3
SAR Result Of LTE Band 7.......................................................................................................................... 88
5.4.4
SAR Result Of LTE Band 12 ....................................................................................................................... 90
5.4.5
SAR Result Of LTE Band 13 ....................................................................................................................... 92
5.4.1
SAR Result Of LTE Band 17 ....................................................................................................................... 94
5.4.2
SAR Result Of LTE Band 25 ....................................................................................................................... 96
5.4.3
SAR Result Of LTE Band 38 ....................................................................................................................... 98
5.4.4
SAR Result Of LTE Band 41 ..................................................................................................................... 100
5.4.5
SAR Result Of 2.4GHz WIFI ...................................................................................................................... 102
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
6 of 117
5.4.6
5.5
SAR Result Of 5GHz WIFI ......................................................................................................................... 103
MULTIPLE TRANSMITTER EVALUATION.............................................................................................................. 105
5.5.1
Simultaneous SAR SAR test evaluation .................................................................................................. 105
5.5.2
Estimated SAR............................................................................................................................................. 105
EQUIPMENT LIST ........................................................................................................................................... 114
MEASUREMENT UNCERTAINTY ................................................................................................................. 115
CALIBRATION CERTIFICATE ....................................................................................................................... 116
PHOTOGRAPHS ............................................................................................................................................. 116
APPENDIX A: DETAILED SYSTEM VALIDATION RESULTS ............................................................................. 117
APPENDIX B: DETAILED TEST RESULTS........................................................................................................... 117
APPENDIX C: CALIBRATION CERTIFICATE ....................................................................................................... 117
APPENDIX D: PHOTOGRAPHS ............................................................................................................................. 117
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
7 of 117
General Information
1.1 Details of Client
Applicant:
Saygus
Address:
10421 South Jordan Gateway, Suite 500, South Jordan, UT 84095
Manufacturer:
Saygus
Address:
10421 South Jordan Gateway, Suite 500, South Jordan, UT 84095
Factory:
Smart Gadgets (Shenzhen) , LTD
Address:
912 Building 1 A, Hezheng-Huiyi Cheng, Xinhu Road, Xixiang Baoan District, Shenzhen,
China
1.2 Test Location
Company:
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch
Address:
No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen,
Guangdong, China
Post code:
518057
Telephone:
+86 (0) 755 2601 2053
Fax:
+86 (0) 755 2671 0594
E-mail:
ee.shenzhen@sgs.com
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
8 of 117
1.3 Test Facility
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
9 of 117
1.4 General Description of EUT
Product Name:
Saygus smartphone V-Squared
Model No.(EUT):
SG02
Trade Mark:
Saygus
Product Phase:
production unit
Device Type:
portable device
Exposure Category:
uncontrolled environment / general population
FCC ID:
2ANBZ-F10104216
SN:
aaee4052
Hardware Version:
SG02_V5.0
Software Version:
Msm8974-userdebug 6.0.1 MMB29M herman.20170914.193102 test-keys
Antenna Type:
Inner Antenna
Device Operating Configurations:
Modulation Mode:
GSM: GMSK, 8PSK; WCDMA: QPSK; CDMA: QPSK; LTE:QPSK,16QAM;
WIFI: DSSS,OFDM; BT: GFSK, π/4DQPSK,8DPSK
Device Class:
GPRS Multi-slots Class:
12
EGPRS Multi-slots Class:
12
HSDPA UE Category:
14
HSUPA UE Category
Frequency Bands:
Battery Information:
Band
Tx (MHz)
Rx (MHz)
GSM850
824-849
869-894
GSM1900
1850-1910
1930-1990
CDMA BC0
824-849
869-894
CDMA BC1
1850-1910
1930-1990
WCDMA IV
1710-1755
2110- 2155
WCDMA II
1850-1910
1930-1990
WCDMA V
824-849
869-894
LTE Band 2
1850-1910
1930-1990
LTE Band 4
1710-1755
2110- 2155
LTE Band 5
824-849
869-894
LTE Band 7
2500-2570
2620- 2690
LTE Band 12
699-716
729- 746
LTE Band 13
777-787
746-756
LTE Band 17
704-716
734-746
LTE Band 25
1850-1915
1930-1995
LTE Band 38
2570-2620
2570-2620
LTE Band 41
2496-2690
2496-2690
WIFI 2.4G
2412-2462
2412-2462
WIFI(5GHz)
5150-5250
5250-5350
5470-5725
5150-5250
5250-5350
5470-5725
BT
2402-2480
2402-2480
Model: HPP553692AB
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
10 of 117
Rated capacity:3200mAh
Battery Type: Rechargeable Li-ion Battery
Manufacturer: Huizhou High power Technology Co., LTD
Headset Information:
Model: ERS308
Manufacturer: Speaker Electronic Technology(HK) Co., LTD
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
11 of 117
1.5 Test Specification
Identity
Document Title
FCC 47CFR §2.1093
Radiofrequency Radiation Exposure Evaluation: Portable Devices
IEEE Std C95.1 – 1991
IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz – 300 GHz.
IEEE 1528-2013
Recommended Practice for Determining the Peak Spatial-Average
Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques
KDB 941225 D01 3G SAR Procedures v03r01 3G SAR Measurement Procedures
KDB 941225 D05 SAR for LTE Devices v02r05 SAR EVALUATION CONSIDERATIONS FOR LTE DEVICES
KDB 248227 D01 802.11 Wi-Fi SAR v02r02
SAR GUIDANCE FOR IEEE 802.11 (Wi-Fi) TRANSMITTERS
KDB 941225 D06 Hotspot Mode SAR v02r01
SAR Evaluation Procedures for Portable Devices with Wireless
Router Capabilities
KDB 648474 D04 Handset SAR v01r03
SAR Evaluation Considerations for Wireless Handsets
KDB447498 D01 General RF Exposure
Guidance v06
Mobile and Portable Devices RF Exposure Procedures and
Equipment Authorization Policies
KDB447498 D03 Supplement C CrossReference v01
OET Bulletin 65, Supplement C Cross-Reference
KDB 865664 D01 SAR Measurement 100 MHz
SAR Measurement Requirements for 100 MHz to 6 GHz
to 6 GHz v01r04
KDB 865664 D02 RF Exposure Reporting
v01r02
RF Exposure Compliance Reporting and Documentation
Considerations
1.6 RF exposure limits
Human Exposure
Uncontrolled Environment
General Population
Controlled Environment
Occupational
Spatial Peak SAR*
(Brain*Trunk)
1.60 mW/g
8.00 mW/g
Spatial Average SAR**
(Whole Body)
0.08 mW/g
0.40 mW/g
Spatial Peak SAR***
(Hands/Feet/Ankle/Wrist)
4.00 mW/g
20.00 mW/g
Notes:
* The Spatial Peak value of the SAR averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube)
and over the appropriate averaging time
** The Spatial Average value of the SAR averaged over the whole body.
*** The Spatial Peak value of the SAR averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a
cube) and over the appropriate averaging time.
Uncontrolled Environments are defined as locations where there is the exposure of individuals who have no knowledge or
control of their exposure.
Controlled Environments are defined as locations where there is exposure that may be incurred by persons who are aware
of the potential for exposure, (i.e. as a result of employment or occupation.)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
12 of 117
SAR Measurements System Configuration
2.1 The SAR Measurement System
This SAR Measurement System uses a Computer-controlled 3-D stepper motor system (SPEAG DASY5
professional system). A E-field probe is used to determine the internal electric fields. The SAR can be obtained
from the equation SAR= σ (|Ei|2)/ ρ where σ and ρ are the conductivity and mass density of the tissue-Simulate.
The DASY5 system for performing compliance tests consists of the following items:
A standard high precision 6-axis robot (Stabile RX family) with controller, teach pendant and software .An arm
extension for accommodation the data acquisition electronics (DAE).
A dosimetric probe, i.e., an isotropic E-field probe optimized and calibrated for usage in tissue simulating liquid.
The probe is equipped with an optical surface detector system.
A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing, AD-conversion,
offset measurements, mechanical surface detection, collision detection, etc. The unit is battery powered with
standard or rechargeable batteries. The signal is optically transmitted to the EOC.
The Electro-optical converter (EOC) performs the conversion between optical and electrical of the signals for the
digital communication to DAE and for the analog signal from the optical surface detection. The EOC is connected
to the measurement server.
F-1. SAR Measurement System Configuration
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
13 of 117

The function of the measurement server is to perform the time critical tasks such as signal filtering, control
of the robot operation and fast movement interrupts.

A probe alignment unit which improves the (absolute) accuracy of the probe positioning.

A computer operating Windows 7.

DASY5 software.

Remote control with teach pendant and additional circuitry for robot safety such as warning lamps, etc.

The SAM twin phantom enabling testing left-hand, right-hand and Body Worn usage.

The device holder for handheld mobile phones.

Tissue simulating liquid mixed according to the given recipes.

Validation dipole kits allowing to validating the proper functioning of the system.
2.2 Isotropic E-field Probe EX3DV4
Symmetrical design with triangular core
Built-in shielding against static charges
PEEK enclosure material (resistant to organic solvents, e.g., DGBE)
Calibration
ISO/IEC 17025 calibration service available.
Frequency
10 MHz to > 6 GHz
Linearity: ± 0.2 dB (30 MHz to 6 GHz)
Directivity
± 0.3 dB in TSL (rotation around probe axis)
± 0.5 dB in TSL (rotation normal to probe axis)
Dynamic Range
10 µW/g to > 100 mW/g
Linearity: ± 0.2 dB (noise: typically < 1 µW/g)
Dimensions
Overall length: 337 mm (Tip: 20 mm)
Tip diameter: 2.5 mm (Body: 12 mm)
Typical distance from probe tip to dipole centers: 1 mm
Application
High precision dosimetric measurements in any exposure scenario
(e.g., very strong gradient fields); the only probe that enables
compliance testing for frequencies up to 6 GHz with precision of better
30%.
Compatibility
DASY3, DASY4, DASY52 SAR and higher, EASY4/MRI
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
14 of 117
2.3 Data Acquisition Electronics (DAE)
Model
DAE3,DAE4
Construction
Signal amplifier, multiplexer, A/D converter
and control logic. Serial optical link for
communication with DASY4/5 embedded
system (fully remote controlled). Two step
probe touch detector for mechanical
surface detection and emergency robot
stop.
Measurement
Range
-100 to +300 mV (16 bit resolution and two
range settings: 4mV,400mV)
Input Offset Voltage
< 5μV (with auto zero)
Input Bias Current
< 50 f A
Dimensions
60 x 60 x 68 mm
2.4 SAM Twin Phantom
Material
Vinylester, glass fiber reinforced (VEGF)
Liquid Compatibility
Compatible with all SPEAG tissue
simulating liquids (incl. DGBE type)
Shell Thickness
2 ± 0.2 mm (6 ± 0.2 mm at ear point)
Dimensions
(incl. Wooden
Support)
Length: 1000 mm
Width: 500 mm
Height: adjustable feet
Filling Volume
approx. 25 liters
Wooden Support
SPEAG standard phantom table
The shell corresponds to the specifications of the Specific Anthropomorphic Mannequin (SAM) phantom
defined in IEEE 1528 and IEC 62209-1. It enables the dosimetric evaluation of left and right hand phone
usage as well as body mounted usage at the flat phantom region. A cover prevents evaporation of the
liquid. Reference markings on the phantom allow the complete setup of all predefined phantom positions
and measurement grids by teaching three points with the robot.
Twin SAM V5.0 has the same shell geometry and is manufactured from the same material as Twin SAM
V4.0, but has reinforced top structure.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
15 of 117
2.5 ELI Phantom
Material
Vinylester, glass fiber reinforced (VE-GF)
Liquid
Compatible with all SPEAG tissue
Compatibility
simulating liquids (incl. DGBE type)
Shell Thickness
2.0 ± 0.2 mm (bottom plate)
Dimensions
Major axis: 600 mm
Minor axis: 400 mm
Filling Volume
approx. 30 liters
Wooden Support
SPEAG standard phantom table
Phantom for compliance testing of handheld and body-mounted wireless devices in the frequency range
of 30 MHz to 6 GHz. ELI is fully compatible with the IEC 62209-2 standard and all known tissue simulating
liquids. ELI has been optimized regarding its performance and can be integrated into our standard
phantom tables. A cover prevents evaporation of the liquid. Reference markings on the phantom allow
installation of the complete setup, including all predefined phantom positions and measurement grids, by
teaching three points. The phantom is compatible with all SPEAG dosimetric probes and dipoles.
ELI V5.0 has the same shell geometry and is manufactured from the same material as ELI4, but has
reinforced top structure.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
16 of 117
2.6 Device Holder for Transmitters
F-2. Device Holder for Transmitters

The DASY device holder is designed to cope with different positions given in the standard. It has two
scales for the device rotation (with respect to the body axis) and the device inclination (with respect to the
line between the ear reference points). The rotation centres for both scales are the ear reference point
(ERP). Thus the device needs no repositioning when changing the angles.

The DASY device holder has been made out of low-loss POM material having the following dielectric
parameters: relative permittivity ε=3 and loss tangent δ=0.02. The amount of dielectric material has been
reduced in the closest vicinity of the device, since measurements have suggested that the influence of the
clamp on the test results could thus be lowered.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
17 of 117
2.7
Measurement procedure
2.7.1 Scanning procedure
Step 1: Power reference measurement
The “reference” and “drift” measurements are located at the beginning and end of the batch process. They
measure the field drift at one single point in the liquid over the complete procedure.
Step 2: Area scan
The SAR distribution at the exposed side of the head was measured at a distance of 4mm from the inner
surface of the shell. The area covered the entire dimension of the head and the horizontal grid spacing was
15mm*15mm or 12mm*12mm or 10mm*10mm.Based on the area scan data, the area of the maximum
absorption was determined by spline interpolation.
Step 3: Zoom scan
Around this point, a volume of 32mm*32mm*30mm (f≤2GHz), 30mm*30mm*30mm (f for 2-3GHz) and
24mm*24mm*22mm (f for 5-6GHz) was assessed by measuring 5x5x7 points (f≤2GHz), 7x7x7 points (f for 23GHz) and 7x7x12 points (f for 5-6GHz). On this basis of this data set, the spatial peak SAR value was
evaluated with the following procedure:
The data at the surface was extrapolated, since the centre of the dipoles is 2.0mm away from the tip of the
probe and the distance between the surface and the lowest measuring point is 1.2mm. (This can be variable.
Refer to the probe specification).The extrapolation was based on a least square algorithm. A polynomial of the
fourth order was calculated through the points in z-axes. This polynomial was then used to evaluate the points
between the surface and the probe tip. The maximum interpolated value was searched with a straight-forward
algorithm. Around this maximum the SAR values averaged over the spatial volumes (1g or 10g) were
computed using the 3D-Spline interpolation algorithm. The volume was integrated with the trapezoidal
algorithm. One thousand points were interpolated to calculate the average. All neighbouring volumes were
evaluated until no neighboring volume with a higher average value was found.
The area and zoom scan resolutions specified in the table below must be applied to the SAR measurements
Probe boundary effect error compensation is required for measurements with the probe tip closer than half a
probe tip diameter to the phantom surface. Both the probe tip diameter and sensor offset distance must satisfy
measurement protocols; to ensure probe boundary effect errors are minimized and the higher fields closest to
the phantom surface can be correctly measured and extrapolated to the phantom surface for computing 1-g
SAR. Tolerances of the post-processing algorithms must be verified by the test laboratory for the scan
resolutions used in the SAR measurements, according to the reference distribution functions specified in IEEE
Std. 1528-2013.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
18 of 117
Step 4: Power reference measurement (drift)
The Power Drift Measurement job measures the field at the same location as the most recent power reference
measurement job within the same procedure, and with the same settings. The indicated drift is mainly the
variation of the DUT’s output power and should vary max. ± 5 %
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
19 of 117
2.7.2 Data Storage
The DASY software stores the acquired data from the data acquisition electronics as raw data (in microvolt
readings from the probe sensors), together with all necessary software parameters for the data evaluation (probe
calibration data, liquid parameters and device frequency and modulation data) in measurement files with the
extension “.DAE3”. The software evaluates the desired unit and format for output each time the data is visualized
or exported. This allows verification of the complete software setup even after the measurement and allows
correction of incorrect parameter settings. For example, if a measurement has been performed with a wrong crest
factor parameter in the device setup, the parameter can be corrected afterwards and the data can be reevaluated. The measured data can be visualized or exported in different units or formats, depending on the
selected probe type ([V/m], [A/m], [°C], [m W/g], [m W/cm²], [dBrel], etc.). Some of these units are not available in
certain situations or show meaningless results, e.g., a SAR output in a lossless media will always be zero. Raw
data can also be exported to perform the evaluation with other software packages.
2.7.3 Data Evaluation by SEMCAD
The SEMCAD software automatically executes the following procedures to calculate the field units from the
microvolt readings at the probe connector. The parameters used in the evaluation are stored in the configuration
modules of the software:
Probe parameters: - Sensitivity
- Conversion factor
ConvFi
- Diode compression point
Dcpi
Device parameters: - Frequency
- Crest factor
cf
Media parameters: - Conductivity
- Density
ρ
Normi, ai0, ai1, ai2
ε
These parameters must be set correctly in the software. They can be found in the component documents or they
can be imported into the software from the configuration files issued for the DASY components. In the direct
measuring mode of the multimeter option, the parameters of the actual system setup are used. In the scan
visualization and export modes, the parameters stored in the corresponding document files are used.
The first step of the evaluation is a linearization of the filtered input signal to account for the compression
characteristics of the detector diode. The compensation depends on the input signal, the diode type and the DCtransmission factor from the diode to the evaluation electronics.
If the exciting field is pulsed, the crest factor of the signal must be known to correctly compensate for peak power.
The formula for each channel can be given as:
With
Vi
= compensated signal of channel i ( i = x, y, z )
Ui = input signal of channel i ( i = x, y, z )
cf = crest factor of exciting field (DASY parameter)
dcp i = diode compression point (DASY parameter)
From the compensated input signals the primary field data for each channel can be evaluated:
E-field probes:
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
20 of 117
H-field probes:
With
Vi = compensated signal of channel i
(i = x, y, z)
Normi = sensor sensitivity of channel I
(i = x, y, z)
[mV/(V/m)2] for E-field Probes
ConvF = sensitivity enhancement in solution
aij = sensor sensitivity factors for H-field probes
f = carrier frequency [GHz]
Ei = electric field strength of channel i in V/m
Hi = magnetic field strength of channel i in A/m
The RSS value of the field components gives the total field strength (Hermitian magnitude):
The primary field data are used to calculate the derived field units.
with
SAR = local specific absorption rate in mW/g
Etot = total field strength in V/m
σ= conductivity in [mho/m] or [Siemens/m]
ε= equivalent tissue density in g/cm3
Note that the density is normally set to 1 (or 1.06), to account for actual brain density rather than the density of
the simulation liquid. The power flow density is calculated assuming the excitation field to be a free space field.
or
with Ppwe = equivalent power density of a plane wave in mW/cm2
Etot = total electric field strength in V/m
Htot = total magnetic field strength in A/m
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
21 of 117
Description of Test Position
3.1 The Head Test Position
3.1.1
SAM Phantom Shape
F-3.
Front, back, and side views of SAM (model for the phantom shell). Full-head model is for illustration
purposes only-procedures in this recommended practice are intended primarily for the phantom setup.
Note: The centre strip including the nose region has a different thickness tolerance.
F-4.
Sagittally bisected phantom with extended perimeter (shown placed on its side as used for SAR
measurements)
F-5. Close-up side view of phantom, showing the
ear region, N-F and B-M lines, and seven crosssectional plane locations
F-6. Side view of the phantom showing relevant
markings and seven cross-sectional plane
locations
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
22 of 117
3.1.2
EUT constructions
F-7. Handset vertical and horizontal reference
lines-“fixed case”
3.1.3
F-8. Handset vertical and horizontal reference
lines-“clam-shell case”
Definition of the “cheek” position
a) Position the device with the vertical centre line of the body of the device and the horizontal line crossing the
centre of the ear piece in a plane parallel to the sagittal plane of the phantom ("initial position"). While maintaining
the device in this plane, align the vertical centre line with the reference plane containing the three ear and mouth
reference points (M, RE and LE) and align the centre of the ear piece with the line RE-LE.
b) Translate the mobile phone box towards the phantom with the ear piece aligned with the line LE-RE until
telephone touches the ear. While maintaining the device in the reference plane and maintaining the phone
contact with the ear, move the bottom of the box until any point on the front side is in contact with the cheek of the
phantom or until contact with the ear is lost.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
23 of 117
3.1.4
Definition of the “tilted” position
a) Position the device in the “cheek” position described above;
b) While maintaining the device in the reference plane described above and pivoting against the ear, move it
outward away from the mouth by an angle of 15 degrees or until contact with the ear is lost.
F-9. Definition of the reference lines and points, on the phone and on the phantom and initial position
F-10.
“Cheek” and “tilt” positions of the mobile phone on the left side
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
24 of 117
3.2 The Body Test Position
3.2.1
Body-worn accessory exposure conditions
Body-worn operating configurations should be tested with the belt-clips and holsters attached to the device and
positioned against a flat phantom in normal use configurations.
Body-worn operating configurations are tested with the belt-clips and holsters attached to the device and
positioned against a flat phantom in a normal use configuration. Per FCC KDB Publication 648474 D04, Bodyworn accessory exposure is typically related to voice mode operations when handsets are carried in body-worn
accessories. The body-worn accessory procedures in FCC KDB Publication 447498 D01 should be used to test
for body-worn accessory SAR compliance, without a headset connected to it. This enables the test results for
such configuration to be compatible with that required for hotspot mode when the body-worn accessory test
separation distance is greater than or equal to that required for hotspot mode, when applicable. When the
reported SAR for a body-worn accessory, measured without a headset connected to the handset, is > 1.2 W/kg,
the highest reported SAR configuration for that wireless mode and frequency band should be repeated for that
body-worn accessory with a headset attached to the handset.
Accessories for Body-worn operation configurations are divided into two categories: those that do not contain
metallic components and those that do contain metallic components. When multiple accessories that do not
contain metallic components are supplied with the device, the device is tested with only the accessory that
dictates the closest spacing to the body. Then multiple accessories that contain metallic components are
tested with the device with each accessory. If multiple accessories share an identical metallic component (i.e.
the same metallic belt-clip used with different holsters with no other metallic components) only the accessory
that dictates the closest spacing to the body is tested.
Body-worn accessories may not always be supplied or available as options for some devices intended to be
authorized for body-worn use. In this case, a test configuration with a separation distance between the back of
the device and the flat phantom is used. Test position spacing was documented. Transmitters that are
designed to operate in front of a person’s face, as in push-to-talk configurations, are tested for SAR compliance
with the front of the device positioned to face the flat phantom in head fluid. For devices that are carried next to
the body such as a shoulder, waist or chest-worn transmitters, SAR compliance is tested with the accessories,
including headsets and microphones, attached to the device and positioned against a flat phantom in a normal
use configuration.
F-11. Test positions for body-worn devices
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
25 of 117
3.2.2
Wireless Router exposure conditions
Some battery-operated handsets have the capability to transmit and receive user data through simultaneous
transmission of WIFI simultaneously with a separate licensed transmitter. The FCC has provided guidance in
FCC KDB Publication 941225 D06 where SAR test considerations for handsets (L x W ≥ 9 cm x 5 cm) are
based on a composite test separation distance of 10 mm from the front, back and edges of the device
containing transmitting antennas within 2.5 cm of their edges, determined from general mixed use conditions
for this type of devices. For devices with form factors smaller than 9 cm x 5 cm, a test separation distance of 5
mm is required.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
26 of 117
SAR System Verification Procedure
4.1
Tissue Simulate Liquid
4.1.1 Recipes for Tissue Simulate Liquid
The bellowing tables give the recipes for tissue simulating liquids to be used in different frequency bands:
Frequency (MHz)
Ingredients
(% by weight)
450
835
1800-2000
2300-2700
Tissue Type
Head
Body
Head
Body
Head
Body
Head
Body
Water
38.56
51.16
40.30
50.75
55.24
70.17
55.00
68.53
Salt (NaCl)
3.95
1.49
1.38
0.94
0.31
0.39
0.2
0.1
Sucrose
56.32
46.78
57.90
48.21
HEC
0.98
0.52
0.24
Bactericide
0.19
0.05
0.18
0.10
44.45
29.44
44.80
31.37
Tween
Salt: 99 % Pure Sodium Chloride
Sucrose: 98 % Pure Sucrose
Water: De-ionized, 16 MΩ+ resistivity
HEC: Hydroxyethyl Cellulose
Tween: Polyoxyethylene (20) sorbitan monolaurate
HSL5GHz is composed of the following ingredients:
Water:50-65%
Mineral oil:10-30%
Emulsifiers:8-25%
Sodium salt:0-1.5%
MSL5GHz is composed of the following ingredients:
Water:64-78%
Mineral oil:11-18%
Emulsifiers:9-15%
Sodium salt:2-3%
Table 1: Recipe of Tissue Simulate Liquid
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
27 of 117
4.1.2 Measurement for Tissue Simulate Liquid
The dielectric properties for this Tissue Simulate Liquids were measured by using the Agilent Model 85070E
Dielectric Probe in conjunction with Agilent E5071C Network Analyzer (300 KHz-8500 MHz). The Conductivity
(σ) and Permittivity (ρ) are listed in Table 2. For the SAR measurement given in this report. The temperature
variation of the Tissue Simulate Liquids was 22±2°C.
Tissue
Type
750
Head
750
Body
835
Head
835
Body
1750
Head
1750
Body
1900
Head
1900
Body
2450
Head
2450
Body
2600
Head
2600
Body
5250
Head
5250
Body
5600
Head
5600
Body
Measured
Frequency
(MHz)
750
750
835
835
1750
1750
1900
1900
2450
2450
2600
2600
5250
5250
5600
5600
Target Tissue (±5%)
εr
41.9
(39.81~44)
55.5
(52.73~58.28)
41.5
(39.43~43.58)
55.2
(52.44~57.96)
40.1
(38.10~42.11)
53.4
(50.73~56.07)
40.0
(38.00~42.00)
53.3
(50.64~55.97)
39.20
(37.24~41.16)
52.70
(50.07~55.34)
39.0
(37.05~40.95)
52.50
(49.88~55.13)
35.9
(34.11~37.70)
48.9
(46.46~51.35)
35.5
(33.73~37.28)
48.5
(46.08~50.93)
σ(S/m)
0.89
(0.85~0.94)
0.96
(0.91~1.00)
0.90
(0.86~0.95)
0.97
(0.92~1.02)
1.37
(1.30~1.44)
1.49
(1.42~1.56)
1.40
(1.33~1.47)
1.52
(1.44~1.60)
1.80
(1.71~1.89)
1.95
(1.85~2.05)
1.96
(1.86~2.06)
2.16
(2.05~2.27)
4.71
(4.47~4.95)
5.36
(5.09~5.63)
5.07
(4.82~5.32)
5.77
(5.48~6.06)
εr
σ(S/m)
Liquid
Temp.
(℃)
43.068
0.873
22.1
2017/12/11
55.223
0.955
22.1
2017/12/12
40.798
0.886
22.1
2017/12/11
54.871
1.011
22.1
2017/12/12
40.413
1.318
22.2
2017/12/6
51.208
1.431
22.2
2017/12/6
40.029
1.362
22.3
2017/12/9
53.897
1.523
22.3
2017/12/9
39.903
1.825
22
2017/12/12
50.753
1.927
22
2017/12/12
39.385
22.1
2017/12/10
50.306
2.115
22.1
2017/12/12
36.578
4.721
22.2
2017/12/28
48.368
5.382
22.2
2017/12/28
35.626
5.107
22.2
2017/12/28
47.435
5.803
22.2
2017/12/28
Measured Tissue
Measured Date
Table 2: Measurement result of Tissue electric parameters
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
28 of 117
4.2
SAR System Check
The microwave circuit arrangement for system verification is sketched in bellow figure. The daily system
accuracy verification occurs within the flat section of the SAM phantom. A SAR measurement was performed to
see if the measured SAR was within +/- 10% from the target SAR values. The tests were conducted on the
same days as the measurement of the EUT. The obtained results from the system accuracy verification are
displayed in the table 3 (A power level of 250mw was input to the dipole antenna). During the tests, the
ambient temperature of the laboratory was in the range 22±2°C, the relative humidity was in the range 60%
and the liquid depth above the ear reference points was above 15 cm in all the cases. It is seen that the system
is operating within its specification, as the results are within acceptable tolerance of the reference values.
F-12. the microwave circuit arrangement used for SAR system verification
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
29 of 117
4.2.1 Justification for Extended SAR Dipole Calibrations
1) Referring to KDB865664 D01 requirements for dipole calibration, instead of the typical annual calibration
recommended by measurement standards, longer calibration intervals of up to three years may be considered
when it is demonstrated that the SAR target, impedance and return loss of a dipole have remain stable according
to the following requirements. Each measured dipole is expected to evaluate with the following criteria at least on
annual interval in Appendix C.
a) There is no physical damage on the dipole;
b) System check with specific dipole is within 10% of calibrated value;
c) Return-loss is within 10% of calibrated measurement;
d) Impedance is within 5Ω from the previous measurement.
2) Network analyzer probe calibration against air, distilled water and a shorting block performed before
measuring liquid parameters.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
30 of 117
4.2.2 Summary System Check Result(s)
10g (W/kg)
Measured
SAR
(normalize
d to 1w)
1g (W/kg)
Measured
SAR
(normalize
d to 1w)
10g (W/kg)
2.03
1.34
8.12
5.36
Body
2.19
1.46
8.76
5.84
Head
2.59
1.72
10.36
6.88
Body
2.54
1.68
10.16
6.72
Head
8.75
4.69
35
18.76
Body
9.11
4.84
36.44
19.36
Head
10.1
5.23
40.4
20.92
Body
10.4
5.48
41.6
21.92
Head
13.5
6.23
54
24.92
Body
12.4
5.72
49.6
22.88
Head
14.7
6.48
58.8
25.92
Body
13.3
5.95
Measured
SAR
250mW
Measured
SAR
250mW
1g (W/kg)
Head
Validation Kit
D750V2
D835V2
D1750V2
D1900V2
D2450V2
D2600V2
Validation Kit
D5GHzV2
Head
(5.25GHz)
Body
(5.25GHz)
Head
(5.6GHz)
Body
(5.6GHz)
53.2
23.8
Measured
SAR
(normalize
d to 1w)
10g (W/kg)
Measured
SAR
100mW
Measured
SAR
100mW
1g (W/kg)
10g (W/kg)
Measured
SAR
(normalize
d to 1w)
1g (W/kg)
7.1
2.02
71
20.2
7.81
2.17
78.1
21.7
7.67
2.16
76.7
21.6
8.41
2.33
84.1
23.3
Target SAR
(normalized
to 1w)(±10%)
Target SAR
(normalized
to1w)(±10%)
1-g(W/kg)
8.17
(7.35~8.99)
8.57
(7.71~9.43)
9.59
(8.63~10.55)
9.65
(8.69~10.62)
36.7
(33.03~40.37)
37
(33.30~40.70)
40.7
(36.63~44.77)
41.6
(37.44~45.76)
53.1
(47.79~58.41)
51.0
(45.9~56.1)
56.6
(50.94~62.26)
54.2
(48.78~59.62)
10-g(W/kg)
5.36
(4.82~5.9)
5.66
(5.09~6.23)
6.29
(5.66~6.92)
6.46
(5.81~7.11)
19.5
(17.55~21.45)
19.7
(17.73~21.67)
21.1
(18.99~23.21)
21.4
(19.26~23.54)
24.9
(22.41~27.39)
23.5
(21.15~25.85)
25.4
(22.86~27.94)
24.3
(21.87~26.73)
Target SAR
(normalized
to 1w)(±10%)
Target SAR
(normalized
to 1w)(±10%)
1-g(W/kg)
76.6
(68.94~84.26)
75.6
(68.04~83.16)
80.4
(72.36~88.44)
81.1
(72.99~89.21)
10-g(W/kg)
21.9
(19.71~24.09)
21.3
(19.17~23.43)
22.8
(20.52~25.08)
22.9
(20.61~25.19)
Liquid
Temp.
(℃)
Measured
Date
22.1
2017/12/11
22.1
2017/12/12
22.1
2017/12/11
22.1
2017/12/12
22.2
2017/12/6
22.2
2017/12/6
22.3
2017/12/9
22.3
2017/12/9
22
2017/12/12
22
2017/12/12
22.1
2017/12/10
22.1
2017/12/12
Liquid
Temp.
(℃)
Measured
Date
22.2
2017/12/28
22.2
2017/12/28
22.2
2017/12/28
22.2
2017/12/28
Table 3: SAR System Check Result
4.2.3 Detailed System Validation Results
Please see the Appendix A
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
31 of 117
Test results and Measurement Data
5.1
3G SAR Test Reduction Procedure
According to KDB 941225D01, in the following procedures, the mode tested for SAR is referred to as the primary
mode. The equivalent modes considered for SAR test reduction are denoted as secondary modes. Both primary
and secondary modes must be in the same frequency band. When the maximum output power and tune-up
tolerance specified for production units in a secondary mode is ≤ ¼ dB higher than the primary mode or when the
highest reported SAR of the primary mode is scaled by the ratio of specified maximum output power and tune-up
tolerance of secondary to primary mode and the adjusted SAR is ≤ 1.2 W/kg, SAR measurement is not required
for the secondary mode. This is referred to as the 3G SAR test reduction procedure in the following SAR test
guidance, where the primary mode is identified in the applicable wireless mode test procedures and the
secondary mode is wireless mode being considered for SAR test reduction by that procedure. When the 3G SAR
test reduction procedure is not satisfied, it is identified as “otherwise” in the applicable procedures; SAR
measurement is required for the secondary mode.
5.2
Operation Configurations
5.2.1 GSM Test Configuration
SAR tests for GSM 850 and GSM 1900, a communication link is set up with a base station by air link. Using
CMU200 the power lever is set to “5”and “0” in SAR of GSM 850 and GSM 1900. The tests in the band of GSM
850 and GSM 1900 are performed in the mode of GPRS/EGPRS function. Since the GPRS class is 12 for this
EUT, it has at most 4 timeslots in uplink and at most 4 timeslots in downlink, the maximum total timeslot is 5. The
EGPRS class is 12 for this EUT, it has at most 4 timeslots in uplink, and at most 4 timeslots in downlink, the
maximum total timeslot is 5.
SAR test reduction for GPRS and EDGE modes is determined by the source-based time-averaged output power
specified for production units, including tune-up tolerance. The data mode with highest specified time-averaged
output power should be tested for SAR compliance in the applicable exposure conditions. For modes with the
same specified maximum output power and tolerance, the higher number time-slot configuration should be tested.
When SAR tests for EGPRS mode is necessary, GMSK modulation should be used to minimize SAR
measurement error due to higher peak-to-average power (PAR) ratios inherent in 8-PSK.
The 3G SAR test reduction procedure is applied to 8-PSK EDGE with GMSK GPRS/EDGE as the primary mode
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
32 of 117
5.2.2 WCDMA Test Configuration
1). Output Power Verification
Maximum output power is verified on the high, middle and low channels according to procedures described in
section 5.2 of 3GPP TS 34.121, using the appropriate RMC or AMR with TPC (transmit power control) set to all
“1’s” for WCDMA/HSDPA or by applying the required inner loop power control procedures to maintain
maximum output power while HSUPA is active. Results for all applicable physical channel configurations
(DPCCH, DPDCHn and spreading codes, HSDPA, HSPA) are required in the SAR report. All configurations
that are not supported by the handset or cannot be measured due to technical or equipment limitations must be
clearly identified.
2). Head SAR
SAR for next to the ear head exposure is measured using a 12.2 kbps RMC with TPC bits configured to all
“1’s”. The 3G SAR test reduction procedure is applied to AMR configurations with 12.2 kbps RMC as the
primary mode. Otherwise, SAR is measured for 12.2 kbps AMR in 3.4 kbps SRB (signaling radio bearer) using
the highest reported SAR configuration in 12.2 kbps RMC for head exposure
3). Body SAR
SAR for body configurations is measured using a 12.2 kbps RMC with TPC bits configured to all “1’s”. The 3G
SAR test reduction procedure is applied to other spreading codes and multiple DPDCHn configurations
supported by the handset with 12.2 kbps RMC as the primary mode. Otherwise, SAR is measured using an
applicable RMC configuration with the corresponding spreaing code or DPDCHn, for the highest reported
body-worn accessory exposure SAR configuration in 12.2 kbps RMC. When more than 2 DPDCHn are
supported by the handset, it may be necessary to configure additional DPDCHn using FTM (Factory Test Mode)
or other chipset based test approaches with parameters similar to those used in 384 kbps and 768 kbps RMC.
4). HSDPA / HSUPA / DC-HSDPA
According to KDB 941225 D01v03, RMC 12.2kbps setting is used to evaluate SAR. If the maximum output
power and tune-up tolerance specified for production units in HSDPA / HSUPA / DC-HSDPA is ≤ ¼ dB higher
than RMC 12.2Kbps or when the highest reported SAR of the RMC12.2Kbps is scaled by the ratio of specified
maximum output power and tune-up tolerance of HSDPA / HSUPA / DC-HSDPA to RMC12.2Kbps and the
adjusted SAR is ≤ 1.2 W/kg, SAR measurement is not required for HSDPA / HSUPA / DC-HSDPA
a)
HSDPA
HSDPA is configured according to the applicable UE category of a test device. The number of HS-DSCH/HSPDSCHs, HARQ processes, minimum inter-TTI interval, transport block sizes and RV coding sequence are
defined by the H-set. To maintain a consistent test configuration and stable transmission conditions, QPSK is
used in the H-set for SAR testing. HS-DPCCH should be configured with a CQI feedback cycle of 4 ms and a
CQI repetition factor of 2 to maintain a constant rate of active CQI slots. DPCCH and DPDCH gain factors(βc,
βd), and HS-DPCCH power offset parameters (∆ACK, ∆NACK, ∆CQI) are set according to values indicated in
the following table The CQI value is determined by the UE category, transport block size, number of HSPDSCHs and modulation used in the H-set.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
33 of 117
Sub-test
βc
Βd
βd(SF)
2/15
15/15
12/15(3)
15/15
CM(dB)
MPR
βc/βd
βhs
64
2/15
4/15
0.0
15/15(3)
64
12/15(3)
24/15
1.0
8/15
64
15/8
30/15
1.5
0.5
(dB)
15/15
4/15
64
15/4
30/15
1.5
0.5
Note1: ACK, NACK and CQI= 8 Ahs = βhs/βc=30/15 βhs=30/15*βc
Note2:For the HS-DPCCH power mask requirement test in clause 5.2C,5.7A,and the Error Vector
Magnitude(EVM) with HS-DPCCH test in clause 5.13.1.A,and HSDPA EVM with phase
discontinuity in clause 5.13.1AA, ACK and NACK= 8 ( Ahs=30/15) with βhs=30/15*βc,and
CQI=
7 ( Ahs=24/15) with βhs=24/15*βc.
Note3: CM=1 forβc/βd =12/15, βhs/βc=24/15. For all other combinations of DPDCH, DPCCH and
HS-DPCCH the MPR is based on the relative CM difference. This is applicable for only UEs that
support HSDPA in release 6 and later releases.
The measurements were performed with a Fixed Reference Channel (FRC) and H-Set 1 QPSK.
Parameter
Value
Nominal average inf. bit rate
534 kbit/s
Inter-TTI Distance
3 TTI‟s
Number of HARQ Processes
2 Processes
Information Bit Payload
3202 Bits
MAC-d PDU size
336 Bits
Number Code Blocks
1 Block
Binary Channel Bits Per TTI
4800 Bits
Total Available SMLs in UE
19200 SMLs
Number of SMLs per HARQ Process
9600 SMLs
Coding Rate
0.67
Number of Physical Channel Codes
Table 4: settings of required H-Set 1 QPSK acc. to 3GPP 34.121
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
34 of 117
MaximumH S-DSCH
HS-DSCH
Maximum HS-DSCH
Minimum Inter-
Category
Codes Received
TTI Interval
7298
19200
7298
28800
7298
28800
7298
38400
7298
57600
7298
67200
10
14411
115200
10
14411
134400
15
25251
172800
10
15
27952
172800
11
3630
14400
12
3630
28800
13
15
34800
259200
14
15
42196
259200
15
15
23370
345600
16
15
27952
345600
Transport BlockBits/HSDSCH TTI
Total Soft
Channel Bits
Table 5: HSDPA UE category
b)
HSUPA
Due to inner loop power control requirements in HSUPA, a commercial communication test set should be used
for the output power and SAR tests. The 12.2 kbps RMC, FRC H-set 1 and E-DCH configurations for HSUPA
should be configured according to the values indicated below as well as other applicable procedures described
in the „WCDMA Handset‟ and „Release 5 HSUPA Data Device‟ sections of 3G device.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
35 of 117
Table 6: Subtests for UMTS Release 6 HSUPA
Table 7: HSUPA UE category
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
36 of 117
5.2.3 CDMA Test Configuration
1)
1x RTT Handsets
The following procedures apply to CDMA 2000 Release 0 and Release A single carrier (1x RTT) handsets
operating with Mobile Protocol Revision 6 or 7 (MOB_P_REV 6 or 7). The default test configuration is to measure
SAR in RC3 with an established radio link between the handset and a communication test set. SAR in RC1 is
selectively confirmed according to the 3G SAR test reduction procedure with RC3 as the primary mode. The
forward and reverse links are configured with the same RC for SAR measurement. Maximum output power is
verified by applying the procedures defined in 3GPP2 C.S0011 and TIA-98-E. SAR must be measured according
to these maximum output conditions and requirements in KDB Publication 447498 D01.
2)
Output Power Verification
Maximum output power is verified on the high, middle and low channels according to procedures in section
4.4.5.2 of 3GPP2 C.S0011/TIA-98-E. Results for at least steps 3, 4 and 10 of the power measurement
procedures are required in the SAR report. Steps 3 and 4 are measured using Loopback Service Option SO55
with power control bits in “All Up” condition. TDSO/SO32 may be used instead of SO55 for step 4. Step 10 is
measured using TDSO/SO32 with power control bits in the “Bits Hold” condition (i.e. alternative Up/Down Bits).
All power measurements defined in C.S0011/TIA-98-E that are inapplicable to the handset or cannot be
measured due to technical or equipment limitations must be clearly identified in the test report.
3)
Head SAR
SAR for next to the ear head exposure is measured in RC3 with the handset configured to transmit at full rate in
SO55. The 3G SAR test reduction procedure is applied to RC1 with RC3 as the primary mode; otherwise, SAR is
required for the channel with maximum measured output in RC1 using the head exposure configuration that
results in the highest reported SAR in RC3.
4)
Body-Worn Accessory SAR
Body-worn accessory SAR is measured in RC3 with the handset configured in TDSO/SO32 to transmit at full rate
on FCH only with all other code channels disabled. The body-worn accessory procedures in KDB Publication
447498 D01 are applied. The 3G SAR test reduction procedure is applied to the multiple code channel
configuration (FCH+SCHn), with FCH only as the primary mode. Otherwise, SAR is required for multiple code
channel configuration (FCH + SCHn), with FCH at full rate and SCH0 enabled at 9600 bps, using the highest
reported SAR configuration for FCH only. When multiple code channels are enabled, the transmitter output can
shift by more than 0.5 dB and may lead to higher SAR drifts and SCH dropouts.
The 3G SAR test reduction procedure is applied to body-worn accessory SAR in RC1 with RC3 as the primary
mode. Otherwise, SAR is required for RC1, with SO55 and full rate, using the highest reported SAR configuration
for body-worn accessory exposure in RC3.
5)
Handsets with built-in Ev-Do
For handsets with Ev-Do capabilities, the 3G SAR test reduction procedure is applied to Ev-Do Rev. 0 with 1x
RTT RC3 as the primary mode to determine body-worn accessory test requirements. Otherwise, body-worn
accessory SAR is required for Rev. 0, at 153.6 kbps, using the highest reported SAR configuration for body-worn
accessory exposure in RC3.
The 3G SAR test reduction procedure is applied separately to Rev. A and Rev. B, with Rev. 0 as the primary
mode to determine body-worn accessory SAR test requirements. When SAR is not required for Rev. 0, the 3G
SAR test reduction is applied with 1x RTT RC3 as the primary mode. Otherwise, SAR is required for Rev. A or
Rev. B, with a Reverse Data Channel payload size of 4096 bits and a Termination Target of 16 slots defined for
Subtype 2 and 3 Physical Layer configurations, using the highest reported SAR configuration for body-worn
accessory exposure in Rev. 0 or RC3, as appropriate.
A Forward Traffic Channel data rate corresponding to the 2-slot version of 307.2 kbps with ACK Channel
transmitting in all slots is configured in the downlink for Rev. 0, Rev. A and Rev. B.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
37 of 117
5.2.4 WiFi Test Configuration
A Wi-Fi device must be configured to transmit continuously at the required data rate, channel bandwidth and
signal modulation, using the highest transmission duty factor supported by the test mode tools for SAR
measurement.
2.4GHz 802.11b
Duty cycle=8.23/8.43 =97.63%
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
38 of 117
5GHz 802.11a
Duty cycle= 1.365/1.56=87.5%
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
39 of 117
5.2.4.1 Initial Test Position SAR Test Reduction Procedure
DSSS and OFDM configurations are considered separately according to the required SAR procedures. SAR is
measured in the initial test position using the 802.11 transmission mode configuration required by the DSSS
procedure or initial test configuration and subsequent test configuration(s) according to the OFDM procedures.
The initial test position procedure is described in the following:
1). When the reported SAR of the initial test position is ≤ 0.4 W/kg, further SAR measurement is not required for
the other (remaining) test positions in that exposure configuration and 802.11 transmission mode
combinations within the frequency band or aggregated band. SAR is also not required for that exposure
configuration in the subsequent test configuration(s).
2). When the reported SAR of the initial test position is > 0.4 W/kg, SAR is repeated for the 802.11 transmission
mode configuration tested in the initial test position using subsequent highest extrapolated or estimated 1-g
SAR conditions determined by area scans or next closest/smallest test separation distance and maximum
RF coupling test positions based on manufacturer justification, on the highest maximum output power
channel, until the reported SAR is ≤ 0.8 W/kg or all required test positions (left, right, touch, tilt or
subsequent surfaces and edges) are tested.
3). For all positions/configurations tested using the initial test position and subsequent test positions, when the
reported SAR is > 0.8 W/kg, SAR is measured for these test positions/configurations on the subsequent next
highest measured output power channel(s) until the reported SAR is ≤ 1.2 W/kg or all required channels are
tested. a) Additional power measurements may be required for this step, which should be limited to those
necessary for identifying the subsequent highest output power channels.
5.2.4.2 Initial Test Configuration Procedures
An initial test configuration is determined for OFDM transmission modes according to the channel bandwidth,
modulation and data rate combination(s) with the highest maximum output power specified for production units in
each standalone and aggregated frequency band. SAR is measured using the highest measured maximum
output power channel. For configurations with the same specified or measured maximum output power,
additional transmission mode and test channel selection procedures are required. SAR test reduction for
subsequent highest output test channels is determined according to reported SAR of the initial test configuration.
For next to the ear, hotspot mode and UMC mini-tablet exposure configurations where multiple test positions are
required, the initial test position procedure is applied to minimize the number of test positions required for SAR
measurement using the initial test configuration transmission mode. For fixed exposure conditions that do not
have multiple SAR test positions, SAR is measured in the transmission mode determined by the initial test
configuration.
When the reported SAR of the initial test configuration is > 0.8 W/kg, SAR measurement is required for
subsequent next highest measured output power channel(s) in the initial test configuration until reported SAR is ≤
1.2 W/kg or all required channels are tested.
5.2.4.3 Subsequent Test Configuration Procedures
SAR measurement requirements for the remaining 802.11 transmission mode configurations that have not been
tested in the initial test configuration are determined separately for each standalone and aggregated frequency
band, in each exposure condition, according to the maximum output power specified for production units. The
initial test position procedure is applied to next to the ear, UMPC mini-tablet and hotspot mode configurations.
When the same maximum output power is specified for multiple transmission modes, additional power
measurements may be required to determine if SAR measurements are required for subsequent highest output
power channels in a subsequent test configuration. The subsequent test configuration and SAR measurement
procedures are described in the following.
1). When SAR test exclusion provisions of KDB Publication 447498 are applicable and SAR measurement
is not required for the initial test configuration, SAR is also not required for the next highest maximum
output power transmission mode subsequent test configuration(s) in that frequency band or aggregated
band and exposure configuration.
2). When the highest reported SAR for the initial test configuration (when applicable, include subsequent
highest output channels), according to the initial test position or fixed exposure position requirements, is
adjusted by the ratio of the subsequent test configuration to initial test configuration specified maximum
output power and the adjusted SAR is ≤ 1.2 W/kg, SAR is not required for that subsequent test
configuration.
3). The number of channels in the initial test configuration and subsequent test configuration can be
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
40 of 117
different due to differences in channel bandwidth. When SAR measurement is required for a
subsequent test configuration and the channel bandwidth is smaller than that in the initial test
configuration, all channels in the subsequent test configuration that overlap with the larger bandwidth
channel tested in the initial test configuration should be used to determine the highest maximum output
power channel. This step requires additional power measurement to identify the highest maximum
output power channel in the subsequent test configuration to determine SAR test reduction.
a)SAR should first be measured for the channel with highest measured output power in the
subsequent test configuration.
b) SAR for subsequent highest measured maximum output power channels in the subsequent test
configuration is required only when the reported SAR of the preceding higher maximum output
power channel(s) in the subsequent test configuration is > 1.2 W/kg or until all required
channels are tested. i) For channels with the same measured maximum output power, SAR
should be measured using the channel closest to the center frequency of the larger channel
bandwidth channel in the initial test configuration.
4). SAR measurements for the remaining highest specified maximum output power OFDM transmission
mode configurations that have not been tested in the initial test configuration (highest maximum output)
or subsequent test configuration(s) (subsequent next highest maximum output power) is determined by
recursively applying the subsequent test configuration procedures in this section to the remaining
configurations according to the following:
a)replace “subsequent test configuration” with “next subsequent test configuration” (i.e.,
subsequent next highest specified maximum output power configuration)
b) replace “initial test configuration” with “all tested higher output power configurations”
5.2.4.4 2.4 GHz SAR Procedures
Separate SAR procedures are applied to DSSS and OFDM configurations in the 2.4 GHz band to simplify DSSS
test requirements. For 802.11b DSSS SAR measurements, DSSS SAR procedure applies to fixed exposure test
position and initial test position procedure applies to multiple exposure test positions. When SAR measurement is
required for an OFDM configuration, the initial test configuration, subsequent test configuration and initial test
position procedures are applied. The SAR test exclusion requirements for 802.11g/n OFDM configurations are
described in following.

802.11b DSSS SAR Test Requirements
SAR is measured for 2.4 GHz 802.11b DSSS using either a fixed test position or, when applicable, the initial test
position procedure. SAR test reduction is determined according to the following:
1). When the reported SAR of the highest measured maximum output power channel for the exposure
configuration is ≤ 0.8 W/kg, no further SAR testing is required for 802.11b DSSS in that exposure
configuration.
2). When the reported SAR is > 0.8 W/kg, SAR is required for that exposure configuration using the next
highest measured output power channel. When any reported SAR is > 1.2 W/kg, SAR is required for the
third channel; i.e., all channels require testing.

2.4 GHz 802.11g/n OFDM SAR Test Exclusion Requirements
When SAR measurement is required for 2.4 GHz 802.11g/n OFDM configurations, the measurement and test
reduction procedures for OFDM are applied (section 5.3, including sub-sections). SAR is not required for the
following 2.4 GHz OFDM conditions.
1). When KDB Publication 447498 SAR test exclusion applies to the OFDM configuration.
2). When the highest reported SAR for DSSS is adjusted by the ratio of OFDM to DSSS specified
maximum output power and the adjusted SAR is ≤ 1.2 W/kg.

SAR Test Requirements for OFDM configurations
When SAR measurement is required for 802.11 g/n OFDM configurations, each standalone and frequency
aggregated band is considered separately for SAR test reduction. In applying the initial test configuration and
subsequent test configuration procedures, the 802.11 transmission configuration with the highest specified
maximum output power and the channel within a test configuration with the highest measured maximum output
power should be clearly distinguished to apply the procedures.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
41 of 117
5.2.4.5 5 GHz WiFi SAR Procedures

1)
2)
3)

U-NII-1 and U-NII-2A Bands
For devices that operate in only one of the U-NII-1 and U-NII-2A bands, the normally required SAR
procedures for OFDM configurations are applied. For devices that operate in both U-NII bands using the
same transmitter and antenna(s), SAR test reduction is determined according to the following:
When the same maximum output power is specified for both bands, begin SAR measurement in U-NII-2A
band by applying the OFDM SAR requirements. If the highest reported SAR for a test configuration is ≤ 1.2
W/kg, SAR is not required for U-NII-1 band for that configuration (802.11 mode and exposure condition);
otherwise, both bands are tested independently for SAR.
When different maximum output power is specified for the bands, begin SAR measurement in the band with
higher specified maximum output power. The highest reported SAR for the tested configuration is adjusted
by the ratio of lower to higher specified maximum output power for the two bands. When the adjusted SAR is
≤ 1.2 W/kg, SAR is not required for the band with lower maximum output power in that test configuration;
otherwise, both bands are tested independently for SAR.
The two U-NII bands may be aggregated to support a 160 MHz channel on channel number 50. Without
additional testing, the maximum output power for this is limited to the lower of the maximum output power
certified for the two bands. When SAR measurement is required for at least one of the bands and the
highest reported SAR adjusted by the ratio of specified maximum output power of aggregated to standalone
band is > 1.2 W/kg, SAR is required for the 160 MHz channel. This procedure does not apply to an
aggregated band with maximum output higher than the standalone band(s); the aggregated band must be
tested independently for SAR. SAR is not required when the 160 MHz channel is operating at a reduced
maximum power and also qualifies for SAR test exclusion.
U-NII-2C and U-NII-3 Bands
The frequency range covered by these bands is 380 MHz (5.47 – 5.85 GHz), which requires a minimum of at
least two SAR probe calibration frequency points to support SAR measurements. when Terminal Doppler
Weather Radar (TDWR) restriction applies, all channels that operate at 5.60 – 5.65 GHz must be included to
apply the SAR test reduction and measurement procedures.
When the same transmitter and antenna(s) are used for U-NII-2C band and U-NII-3 band or 5.8 GHz band of
§15.247, the bands may be aggregated to enable additional channels with 20, 40 or 80 MHz bandwidth to
span across the band gap, as illustrated in Appendix B. The maximum output power for the additional band
gap channels is limited to the lower of those certified for the bands. Unless band gap channels are
permanently disabled, they must be considered for SAR testing. The frequency range covered by these
bands is 380 MHz (5.47 – 5.85 GHz), which requires a minimum of at least two SAR probe calibration
frequency points to support SAR measurements. To maintain SAR measurement accuracy and to facilitate
test reduction, the channels in U-NII-2C band above 5.65 GHz may be grouped with the 5.8 GHz channels in
U-NII-3 or §15.247 band to enable two SAR probe calibration frequency points to cover the bands, including
the band gap channels. When band gap channels are supported and the bands are not aggregated for SAR
testing, band gap channels must be considered independently in each band according to the normally
required OFDM SAR measurement and probe calibration frequency points requirements.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
42 of 117

OFDM Transmission Mode SAR Test Configuration and Channel Selection Requirements
The initial test configuration for 5 GHz OFDM transmission modes is determined by the 802.11 configuration
with the highest maximum output power specified for production units, including tune-up tolerance, in each
standalone and aggregated frequency band. SAR for the initial test configuration is measured using the
highest maximum output power channel determined by the default power measurement procedures. When
multiple configurations in a frequency band have the same specified maximum output power, the initial test
configuration is determined according to the following steps applied sequentially.
1) The largest channel bandwidth configuration is selected among the multiple configurations with the same
specified maximum output power.
2) If multiple configurations have the same specified maximum output power and largest channel bandwidth,
the lowest order modulation among the largest channel bandwidth configurations is selected.
3) If multiple configurations have the same specified maximum output power, largest channel bandwidth
and lowest order modulation, the lowest data rate configuration among these configurations is selected.
4) When multiple transmission modes (802.11a/g/n/ac) have the same specified maximum output power,
largest channel bandwidth, lowest order modulation and lowest data rate, the lowest order 802.11 mode
is selected; i.e., 802.11a is chosen over 802.11n then 802.11ac or 802.11g is chosen over 802.11n.
After an initial test configuration is determined, if multiple test channels have the same measured
maximum output power, the channel chosen for SAR measurement is determined according to the
following. These channel selection procedures apply to both the initial test configuration and
subsequent test configuration(s), with respect to the default power measurement procedures or
additional power measurements required for further SAR test reduction. The same procedures also
apply to subsequent highest output power channel(s) selection.
a) The channel closest to mid-band frequency is selected for SAR measurement.
b) For channels with equal separation from mid-band frequency; for example, high and low channels
or two mid-band channels, the higher frequency (number) channel is selected for SAR
measurement.

SAR Test Requirements for OFDM configurations
When SAR measurement is required for 802.11 a/n/ac OFDM configurations, each standalone and frequency
aggregated band is considered separately for SAR test reduction. When the same transmitter and antenna(s) are
used for U-NII-1 and U-NII-2A bands, additional SAR test reduction applies. When band gap channels between
U-NII-2C band and 5.8 GHz U-NII-3 or §15.247 band are supported, the highest maximum output power
transmission mode configuration and maximum output power channel across the bands must be used to
determine SAR test reduction, according to the initial test configuration and subsequent test configuration
requirements. In applying the initial test configuration and subsequent test configuration procedures, the 802.11
transmission configuration with the highest specified maximum output power and the channel within a test
configuration with the highest measured maximum output power should be clearly distinguished to apply the
procedures.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
43 of 117
5.2.5 LTE Test Configuration
LTE modes were tested according to FCC KDB 941225 D05 publication. Please see notes after the tabulated
SAR data for required test configurations. Establishing connections with base station simulators ensure a
consistent means for testing SAR and are recommended for evaluating SAR [4]. The R&S CMW500 was used for
LTE output power measurements and SAR testing. Max power control was used so the UE transmits with
maximum output power during SAR testing. SAR must be measured with the maximum TTI (transmit time interval)
supported by the device in each LTE configuration.
TDD LTE test consideration
For Time-Division Duplex (TDD) systems, SAR must be tested using a fixed periodic duty factor according to the
highest transmission duty factor implemented for the device and supported by the defined 3GPP LTE TDD
configurations.
SAR was tested with the highest transmission duty factor (63.33%) using Uplink-downlink configuration 0 and
Special subframe configuration 7.
LTE TDD Band support 3GPP TS 36.211 section 4.2 for Type 2 Frame Structure and Table 4.2-2 for uplinkdownlink configurations and Table 4.2-1 for Special subframe configurations.
Frame structure type 2:
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
44 of 117
Configuration of special subframe (lengths of DwPTS/GP/UpPTS).
Normal cyclic prefix in downlink
Special
subframe
configuration
DwPTS
6592.Ts
19760.Ts
21952.Ts
24144.Ts
26336.Ts
6592.Ts
19760.Ts
21952.Ts
24144.Ts
13168.Ts
Extended cyclic prefix in downlink
UpPTS
Normal cyclic
Extended cyclic
prefix in uplink
prefix in uplink
2192.Ts
UpPTS
Normal cyclic Extended cyclic
prefix in uplink
prefix in uplink
7680.Ts
20480.Ts
23040.Ts
25600.Ts
7680.Ts
20480.Ts
23040.Ts
25600.Ts
2560.Ts
4384.Ts
DwPTS
5120.Ts
2192.Ts
2560.Ts
4384.Ts
5120.Ts
Uplink-downlink configurations.
Calculated Duty Cycle=[Extended cyclic prefix in uplink x (Ts) x # of S + # of U]/10ms
UplinkDownlink
Configurat
ion
Downlink-toUplink Switchpoint Periodicity
Subframe Number
Calculated
Duty
Cycle (%)
5 ms
5 ms
43.33
5 ms
23.33
10 ms
31.67
10 ms
21.67
10 ms
11.67
5 ms
53.33
63.33
A) Spectrum Plots for RB Configurations
A properly configured base station simulator was used for SAR tests and power measurements. Therefore,
spectrum plots for RB configurations were not required to be included in this report.
B) MPR
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
45 of 117
MPR is permanently implemented for this device by the manufacturer. The specific manufacturer target MPR is
indicated alongside the SAR results. MPR is enabled for this device, according to 3GPP TS36.101 Section 6.2.3
– 6.2.5 under Table 6.2.3-1.
C) A-MPR
A-MPR (Additional MPR) has been disabled for all SAR tests by setting NS=01 on the base station simulator.
D) Largest channel bandwidth standalone SAR test requirements
1) QPSK with 1 RB allocation
Start with the largest channel bandwidth and measure SAR for QPSK with 1 RB allocation, using the RB offset
and required test channel combination with the highest maximum output power for RB offsets at the upper edge,
middle and lower edge of each required test channel. When the reported SAR is ≤ 0.8 W/kg, testing of the
remaining RB offset configurations and required test channels is not required for 1 RB allocation; otherwise, SAR
is required for the remaining required test channels and only for the RB offset configuration with the highest
output power for that channel. When the reported SAR of a required test channel is > 1.45 W/kg, SAR is required
for all three RB offset configurations for that required test channel.
2) QPSK with 50% RB allocation
The procedures required for 1 RB allocation in 1) are applied to measure the SAR for QPSK with 50% RB
allocation.
3) QPSK with 100% RB allocation
For QPSK with 100% RB allocation, SAR is not required when the highest maximum output power for 100 % RB
allocation is less than the highest maximum output power in 50% and 1 RB allocations and the highest reported
SAR for 1 RB and 50% RB allocation in 1) and 2) are ≤ 0.8 W/kg. Otherwise, SAR is measured for the highest
output power channel and if the reported SAR is > 1.45 W/kg, the remaining required test channels must also be
tested.
4) Higher order modulations
For each modulation besides QPSK; e.g., 16-QAM, 64-QAM, apply the QPSK procedures in above sections to
determine the QAM configurations that may need SAR measurement. For each configuration identified as
required for testing, SAR is required only when the highest maximum output power for the configuration in the
higher order modulation is > ½ dB higher than the same configuration in QPSK or when the reported SAR for the
QPSK configuration is > 1.45 W/kg.
E) Other channel bandwidth standalone SAR test requirements
For the other channel bandwidths used by the device in a frequency band, apply all the procedures required for
the largest channel bandwidth in section A) to determine the channels and RB configurations that need SAR
testing and only measure SAR when the highest maximum output power of a configuration requiring testing in the
smaller channel bandwidth is > ½ dB higher than the equivalent channel configurations in the largest channel
bandwidth configuration or the reported SAR of a configuration for the largest channel bandwidth is > 1.45 W/kg.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
46 of 117
5.2.6 DUT Antenna Locations
Unit: mm
Display diagonal dimension: 12.6 cm
Overall diagonal dimension: 13.4 cm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
47 of 117
5.2.7 EUT side for SAR Testing
According to the distance between Main &WIFI antennas and the sides of the EUT we can draw the conclusion
that:
EUT Sides for SAR Testing
Mode
Front
Back
Left
Right
Top
Bottom
GSM
Yes
Yes
Yes
Yes
No
Yes
WCDMA
Yes
Yes
Yes
Yes
No
Yes
LTE
Yes
Yes
Yes
Yes
No
Yes
Wi-Fi(2.4GHz)
Yes
Yes
No
Yes
Yes
No
Wi-Fi(5GHz)
Yes
Yes
No
Yes
Yes
No
Table 8: EUT Sides for SAR Testing.
Note: When the antenna-to-edge distance is greater than 2.5cm, such position does not need to be tested.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
48 of 117
5.2.8 Stand-alone SAR test evaluation
Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and
10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical
simulation, is not required when the corresponding SAR Test Exclusion Threshold condition is satisfied. These
test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF
channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required
for the exposure conditions.
Freq.
Band
Wi-Fi
Wi-Fi
Bluetooth
Frequency
(GHz)
2.45
5.68
2.48
Position
Head
Bodyworn
hotspot
Head
Bodyworn
hotspot
Head
Bodyworn
Average Power
Test
Separation
(mm)
Calculate
Value
Exclusion
Threshold
Exclusion
(Y/N)
12.5
dBm
16
mW
39.8
16
39.8
15
4.2
16
13.5
39.8
22.4
10
6.3
10.7
13.5
22.4
15
3.6
13.5
6.5
22.4
4.5
10
10.3
1.4
6.5
4.5
15
0.5
The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are
determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0
for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where
• f(GHz) is the RF channel transmit frequency in GHz
• Power and distance are rounded to the nearest mW and mm before calculation
• The result is rounded to one decimal place for comparison
The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for
transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm,
a distance of 5 mm is applied to determine SAR test exclusion.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
49 of 117
5.3 Measurement of RF conducted Power
5.3.1 Conducted Power Of GSM
GSM 850
Burst Output Power(dBm)
Channel
GSM
GSM
(GMSK)
1 TX
Slot
2 TX
GPRS/EGP
Slots
RS
3 TX
(GMSK)
Slots
4 TX
Slots
1 TX
Slot
2 TX
Slots
EGPRS(8P
SK)
3 TX
Slots
4 TX
Slots
Tune
up
Division
Factors
Frame-Average Output
Power(dBm)
128
190
251
Tune
up
128
190
251
30.97
31.06
31.01
32
-9.19
21.78
21.87
21.82
22.81
31.03
31.02
31
32
-9.19
21.84
21.83
21.81
22.81
30.61
30.53
30.32
31.5
-6.18
24.43
24.35
24.14
25.32
28.11
28.54
28.47
29.5
-4.42
23.69
24.12
24.05
25.08
27.11
27.28
27.36
28.5
-3.17
23.94
24.11
24.19
25.33
26.63
26.76
26.81
27.5
-9.19
17.44
17.57
17.62
18.31
25.08
25.07
25.22
26
-6.18
18.9
18.89
19.04
19.82
23.25
23.41
23.32
24
-4.42
18.83
18.99
18.9
19.58
21.93
22.12
22.01
22.5
-3.17
18.76
18.95
18.84
19.33
GSM 1900
Burst Output Power(dBm)
Channel
GSM
GSM
(GMSK)
1 TX
Slot
2 TX
GPRS/EGP
Slots
RS
3 TX
(GMSK)
Slots
4 TX
Slots
1 TX
Slot
2 TX
Slots
EGPRS(8P
SK)
3 TX
Slots
4 TX
Slots
Tune
up
Division
Factors
Frame-Average Output
Power(dBm)
512
661
810
Tune
up
512
661
810
30.73
30.7
30.62
31
-9.19
21.54
21.51
21.43
21.81
30.75
30.69
30.58
31
-9.19
21.56
21.5
21.39
21.81
30.54
30.48
30.26
31
-6.18
24.36
24.3
24.08
24.82
28.54
28.42
28.26
29
-4.42
24.12
24
23.84
24.58
26.8
26.74
26.71
27.5
-3.17
23.63
23.57
23.54
24.33
25.12
25.18
24.91
26
-9.19
15.93
15.99
15.72
16.81
23.85
23.67
23.48
24.5
-6.18
17.67
17.49
17.3
18.32
23.06
23.11
23.01
23.5
-4.42
18.64
18.69
18.59
19.08
21.41
21.03
21.01
22
-3.17
18.24
17.86
17.84
18.83
Table 9: Conducted Power Of GSM
Note:
1). CMU200 measures GSM peak and average output power for active timeslots. For SAR the time based
average power is relevant. The difference in between depends on the duty cycle of the TDMA signal:
No. of timeslots
Duty Cycle
1:8.3
1:4.15
1:2.77
1:2.075
Time based avg. power
compared to slotted avg. power
-9.19
-6.18
-4.42
-3.17
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
50 of 117
2). The frame-averaged power is linearly proportion to the slot number configured and it is linearly scaled the
maximum burst-averaged power based on time slots. The calculated method is shown as below:
Frame-averaged power = 10 x log (Burst-averaged power mW x Slot used / 8
3). When the maximum output power variation across the required test channels is > ½ dB, instead of the
middle channel, the highest output power channel must be used
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
51 of 117
5.3.2 Conducted Power Of WCDMA
WCDMA Band II
Average Conducted Power(dBm)
Channel
WCDMA
HSDPA
HSUPA
9262
9400
9538
Tune up
12.2kbps RMC
23.16
23.04
23.12
23.5
12.2kbps AMR
22.93
22.96
22.99
23.5
Subtest 1
22.15
22.05
22.11
22.5
Subtest 2
22.03
22.02
21.98
22.5
Subtest 3
21.47
21.52
21.42
22
Subtest 4
21.45
21.5
21.46
22
Subtest 1
21.58
21.59
21.64
22
Subtest 2
21.62
21.56
21.61
22
Subtest 3
21.58
21.59
21.58
22
Subtest 4
21.63
21.58
21.56
22
Subtest 5
21.84
21.74
21.73
22
WCDMA Band IV
Average Conducted Power(dBm)
WCDMA
HSDPA
HSUPA
WCDMA
HSDPA
HSUPA
Channel
12.2kbps RMC
12.2kbps AMR
Subtest 1
Subtest 2
Subtest 3
Subtest 4
1312
22.72
22.57
21.8
21.71
21.28
21.23
1412
22.88
22.65
21.86
21.77
21.37
21.33
1513
22.99
22.84
21.88
22.01
21.53
21.43
Tune up
23.5
23.5
22.5
22.5
22
22
Subtest 1
21.16
21.24
21.48
22
Subtest 2
21.18
21.2
21.45
22
Subtest 3
21.11
21.22
21.41
22
Subtest 4
21.11
21.28
21.48
22
Subtest 5
21.3
21.41
21.65
22
Average Conducted Power(dBm)
Channel
4132
4182
12.2kbps RMC
21.86
21.96
12.2kbps AMR
21.71
21.78
Subtest 1
21.69
21.71
Subtest 2
21.66
21.69
Subtest 3
21.22
21.27
Subtest 4
21.13
21.19
Subtest 1
21.03
21.01
Subtest 2
20.94
20.86
Subtest 3
21.01
20.92
Subtest 4
20.89
20.79
Subtest 5
21.08
21.01
4233
21.87
21.69
21.62
21.72
21.28
21.18
20.98
20.67
20.87
20.68
20.92
Tune up
22.5
22.5
22.5
22.5
22
22
22
22
22
22
22
Table 10: Conducted Power Of WCDMA
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
52 of 117
5.3.3 Conducted Power Of CDMA
CDMA BC0(850MHz)
Average Conducted Power(dBm)
Channel
1xRTT
1013
384
777
Tune up
RC1 SO55
(Loopback)
21.57
21.54
21.46
22
RC3 SO55
(Loopback)
21.59
21.58
21.47
22
RC3 SO32
(+FCH)
21.56
21.52
21.46
22
RC3 SO32
(FCH+SCH)
21.54
21.5
21.44
22
CDMA BC1(1900MHz)
Average Conducted Power(dBm)
Channel
1xRTT
25
600
1175
Tune up
RC1 SO55
(Loopback)
21.74
21.59
21.2
22
RC3 SO55
(Loopback)
21.77
21.62
21.26
22
RC3 SO32
(+FCH)
21.75
21.6
21.22
22
RC3 SO32
(FCH+SCH)
21.74
21.58
21.21
22
Table 11: Conducted Power Of CDMA
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
53 of 117
5.3.4 Conducted Power Of LTE
LTE Band 2
Bandwidth
Modulation
QPSK
1.4MHz
16QAM
Bandwidth
Modulation
QPSK
3MHz
16QAM
Bandwidth
Modulation
QPSK
5MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
RB size
RB offset
15
15
14
14
RB size
RB offset
12
12
12
25
12
12
12
13
24
13
13
24
13
Channel
18607
21.57
21.54
21.56
21.57
21.56
21.59
20.6
20.5
20.52
20.47
20.51
20.52
20.58
19.48
Channel
18615
21.54
21.49
21.55
20.6
20.56
20.61
20.57
20.48
20.48
20.48
19.59
19.59
19.57
19.57
Channel
18625
21.54
21.5
21.5
20.64
20.57
20.56
20.62
20.53
20.49
20.41
19.58
19.55
19.57
Channel
18900
21.48
21.51
21.49
21.51
21.45
21.48
20.54
20.44
20.42
20.38
20.44
20.42
20.47
19.4
Channel
18900
21.44
21.42
21.45
20.5
20.48
20.48
20.51
20.41
20.29
20.36
19.44
19.43
19.46
19.46
Channel
18900
21.56
21.42
21.45
20.49
20.51
20.47
20.52
20.48
20.4
20.32
19.46
19.46
19.51
Channel
19193
21.59
21.59
21.62
21.64
21.6
21.58
20.62
20.52
20.52
20.55
20.51
20.51
20.51
19.49
Channel
19185
21.55
21.58
21.56
20.57
20.57
20.59
20.52
20.46
20.44
20.45
19.6
19.56
19.57
19.56
Channel
19175
21.53
21.54
21.56
20.56
20.56
20.55
20.51
20.38
20.42
20.48
19.53
19.55
19.56
Tune up
22.5
22.5
22.5
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
54 of 117
Bandwidth
Modulation
QPSK
10MHz
16QAM
Bandwidth
Modulation
QPSK
15MHz
16QAM
Bandwidth
Modulation
QPSK
20MHz
16QAM
25
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
RB size
RB offset
36
36
36
75
36
36
36
75
38
74
18
39
38
74
18
39
RB size
RB offset
50
50
50
100
50
50
50
100
50
99
25
50
50
99
25
50
19.55
Channel
18650
21.53
21.53
21.46
20.58
20.58
20.62
20.57
20.55
20.48
20.47
19.56
19.57
19.53
19.58
Channel
18675
21.55
21.51
21.48
20.63
20.58
20.56
20.55
20.5
20.5
20.43
19.52
19.54
19.51
19.54
Channel
18700
21.57
21.5
21.47
20.61
20.55
20.55
20.59
20.55
20.47
20.36
19.53
19.55
19.48
19.51
19.44
Channel
18900
21.54
21.44
21.47
20.5
20.5
20.51
20.51
20.51
20.42
20.45
19.5
19.44
19.44
19.43
Channel
18900
21.59
21.44
21.49
20.46
20.44
20.48
20.52
20.5
20.41
20.4
19.49
19.4
19.45
19.47
Channel
18900
21.58
21.43
21.43
20.63
20.48
20.47
20.52
20.51
20.39
20.42
19.52
19.38
19.4
19.44
19.56
Channel
19150
21.53
21.49
21.56
20.48
20.55
20.52
20.51
20.46
20.41
20.47
19.51
19.49
19.57
19.46
Channel
19125
21.53
21.47
21.57
20.49
20.42
20.5
20.46
20.49
20.36
20.49
19.42
19.37
19.44
19.39
Channel
19100
21.52
21.46
21.53
20.52
20.52
20.46
20.52
20.54
20.41
20.4
19.45
19.42
19.41
19.47
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
55 of 117
LTE Band 4
Bandwidth
Modulation
QPSK
1.4MHz
16QAM
Bandwidth
Modulation
QPSK
3MHz
16QAM
Bandwidth
Modulation
QPSK
5MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
RB size
RB offset
15
15
14
14
RB size
RB offset
12
12
12
25
12
12
12
25
13
24
13
13
24
13
Channel
19957
21.51
21.47
21.53
21.53
21.51
21.53
20.54
20.47
20.43
20.39
20.39
20.38
20.44
19.4
Channel
19965
21.48
21.47
21.47
20.49
20.46
20.48
20.49
20.36
20.42
20.39
19.47
19.48
19.51
19.45
Channel
19975
21.45
21.45
21.47
20.47
20.48
20.5
20.47
20.35
20.42
20.4
19.49
19.46
19.46
19.45
Channel
20175
21.53
21.53
21.45
21.57
21.52
21.47
20.54
20.42
20.49
20.3
20.44
20.42
20.37
19.4
Channel
20175
21.5
21.38
21.39
20.53
20.46
20.4
20.52
20.4
20.29
20.35
19.53
19.49
19.41
19.5
Channel
20175
21.5
21.36
21.37
20.47
20.52
20.39
20.52
20.37
20.28
20.28
19.5
19.48
19.42
19.46
Channel
20393
21.5
21.48
21.5
21.51
21.52
21.47
20.46
20.39
20.39
20.37
20.39
20.39
20.37
19.39
Channel
20385
21.49
21.47
21.49
20.42
20.47
20.44
20.44
20.32
20.3
20.39
19.46
19.49
19.47
19.43
Channel
20375
21.45
21.44
21.44
20.41
20.4
20.41
20.4
20.32
20.32
20.33
19.46
19.45
19.46
19.44
Tune up
22
22
22
22
22
22
21
21
21
21
21
21
21
20
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
20
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
20
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
56 of 117
Bandwidth
Modulation
QPSK
10MHz
16QAM
Bandwidth
Modulation
QPSK
15MHz
16QAM
Bandwidth
Modulation
QPSK
20MHz
16QAM
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
RB size
RB offset
36
36
36
75
36
36
36
75
38
74
18
39
38
74
18
39
RB size
RB offset
50
50
50
100
50
50
50
100
50
99
25
50
50
99
25
50
Channel
20000
21.47
21.53
21.53
20.46
20.47
20.5
20.52
20.39
20.43
20.47
19.48
19.51
19.53
19.48
Channel
20025
21.46
21.5
21.44
20.52
20.5
20.56
20.52
20.45
20.46
20.32
19.42
19.45
19.49
19.46
Channel
20050
21.44
21.5
21.29
20.51
20.5
20.37
20.42
20.4
20.45
20.21
19.47
19.46
19.39
19.37
Channel
20175
21.44
21.38
21.51
20.48
20.5
20.52
20.5
20.31
20.32
20.44
19.52
19.54
19.47
19.46
Channel
20175
21.5
21.39
21.51
20.47
20.52
20.49
20.46
20.43
20.27
20.38
19.5
19.46
19.48
19.5
Channel
20175
21.49
21.4
21.47
20.53
20.51
20.43
20.44
20.44
20.31
20.37
19.48
19.46
19.47
19.47
Channel
20350
21.48
21.42
21.45
20.46
20.46
20.4
20.48
20.37
20.35
20.35
19.5
19.49
19.45
19.43
Channel
20325
21.58
21.44
21.44
20.41
20.43
20.46
20.44
20.47
20.36
20.34
19.44
19.44
19.4
19.45
Channel
20300
21.54
21.4
21.45
20.55
20.42
20.37
20.48
20.48
20.35
20.3
19.54
19.37
19.4
19.52
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
20
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
20
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
20
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
57 of 117
LTE Band 5
Bandwidth
Modulation
QPSK
1.4MHz
16QAM
Bandwidth
Modulation
QPSK
3MHz
16QAM
Bandwidth
Modulation
QPSK
5MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
RB size
RB offset
15
15
14
14
RB size
RB offset
12
12
12
25
12
12
12
25
13
24
13
13
24
13
Channel
20407
20.69
20.65
20.63
20.7
20.68
20.68
19.77
19.67
19.71
19.6
19.71
19.65
19.7
18.66
Channel
20415
20.67
20.58
20.6
19.74
19.59
19.66
19.77
19.64
19.57
19.58
18.84
18.67
18.72
18.79
Channel
20425
20.67
20.54
20.6
19.69
19.63
19.62
19.63
19.64
19.51
19.5
18.78
18.71
18.7
18.71
Channel
20525
20.63
20.59
20.65
20.61
20.61
20.65
19.72
19.6
19.62
19.57
19.61
19.61
19.59
18.58
Channel
20525
20.67
20.56
20.66
19.79
19.69
19.64
19.77
19.69
19.55
19.67
18.83
18.73
18.68
18.73
Channel
20525
20.6
20.56
20.64
19.75
19.75
19.75
19.74
19.53
19.5
19.61
18.83
18.79
18.8
18.77
Channel
20643
20.79
20.7
20.74
20.73
20.72
20.76
19.82
19.77
19.74
19.73
19.74
19.7
19.75
18.76
Channel
20635
20.79
20.73
20.72
19.82
19.8
19.77
19.84
19.71
19.67
19.73
18.84
18.84
18.86
18.82
Channel
20625
20.62
20.71
20.67
19.66
19.77
19.81
19.72
19.58
19.64
19.7
18.76
18.83
18.83
18.69
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
58 of 117
Bandwidth
Modulation
QPSK
10MHz
16QAM
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
Channel
20450
20.67
20.59
20.6
19.65
19.62
19.81
19.71
19.66
19.57
19.62
18.76
18.7
18.8
18.69
Channel
20525
20.68
20.62
20.67
19.78
19.76
19.76
19.72
19.67
19.56
19.63
18.78
18.79
18.78
18.77
Channel
20600
20.72
20.61
20.71
19.73
19.7
19.67
19.68
19.77
19.65
19.69
18.8
18.76
18.74
18.76
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
59 of 117
LTE Band 7
Bandwidth
Modulation
QPSK
5MHz
16QAM
Bandwidth
Modulation
QPSK
10MHz
16QAM
Bandwidth
Modulation
QPSK
15MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
12
12
12
25
12
12
12
25
13
24
13
13
24
13
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
RB size
RB offset
36
36
36
75
36
36
36
38
74
18
39
38
74
18
39
Channel
20775
21.47
21.45
21.53
20.52
20.43
20.5
20.41
20.3
20.26
20.34
19.34
19.26
19.27
19.25
Channel
20800
21.48
21.52
21.61
20.46
20.53
20.56
20.55
20.35
20.41
20.47
19.27
19.35
19.45
19.34
Channel
20825
21.47
21.56
21.61
20.44
20.57
20.58
20.46
20.34
20.36
20.37
19.27
19.4
19.34
Channel
21100
21.57
21.55
21.59
20.56
20.51
20.5
20.54
20.4
20.36
20.36
19.36
19.33
19.31
19.32
Channel
21100
21.68
21.6
21.69
20.57
20.56
20.52
20.6
20.51
20.44
20.54
19.42
19.35
19.38
19.33
Channel
21100
21.56
21.61
21.67
20.54
20.56
20.44
20.55
20.33
20.42
20.49
19.3
19.33
19.28
Channel
21425
21.47
21.53
21.58
20.45
20.47
20.5
20.47
20.28
20.37
20.43
19.26
19.3
19.33
19.35
Channel
21400
21.52
21.53
21.57
20.39
20.5
20.51
20.45
20.36
20.38
20.51
19.26
19.27
19.37
19.26
Channel
21375
21.46
21.56
21.65
20.5
20.54
20.53
20.44
20.33
20.42
20.53
19.27
19.32
19.26
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
20
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
20
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
60 of 117
Bandwidth
Modulation
QPSK
20MHz
16QAM
75
RB size
RB offset
50
50
50
100
50
50
50
100
50
99
25
50
50
99
25
50
19.27
Channel
20850
21.43
21.56
21.65
20.44
20.54
20.49
20.48
20.34
20.4
20.4
19.3
19.28
19.26
19.26
19.32
Channel
21100
21.57
21.58
21.62
20.53
20.47
20.44
20.5
20.37
20.44
20.35
19.32
19.33
19.3
19.3
19.24
Channel
21350
21.54
21.5
21.58
20.41
20.48
20.5
20.51
20.34
20.4
20.45
19.24
19.24
19.21
19.25
20
Tune up
22
22
22
21
21
21
21
21
21
21
20
20
20
20
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
61 of 117
LTE FDD Band 12
Bandwidth
Modulation
QPSK
1.4MHz
16QAM
Bandwidth
Modulation
QPSK
3MHz
16QAM
Bandwidth
Modulation
QPSK
5MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
RB size
RB offset
15
15
14
14
RB size
RB offset
12
12
12
25
12
12
12
13
24
13
13
24
13
Channel
23017
20.91
20.79
20.84
20.82
20.8
20.82
Channel
23095
20.85
20.81
20.88
20.84
20.83
20.88
Channel
23173
20.83
20.83
20.99
20.85
20.93
20.98
19.86
19.88
19.78
19.73
19.88
19.8
19.8
19.76
20.04
19.82
19.76
19.9
19.79
19.8
19.82
18.78
Channel
23025
20.86
20.78
20.81
19.85
19.81
19.81
19.78
19.81
19.65
19.72
18.82
18.86
18.88
18.82
Channel
23035
20.85
20.75
20.81
19.8
19.78
19.85
19.78
19.77
19.68
19.73
18.82
18.81
18.83
19.81
19.79
19.84
18.8
Channel
23095
20.9
20.83
20.87
19.85
19.88
19.86
19.86
19.84
19.77
19.76
18.86
18.88
18.91
18.84
Channel
23095
20.85
20.79
20.81
19.78
19.84
19.85
19.85
19.76
19.77
19.75
18.86
18.86
18.87
19.83
19.92
19.96
18.89
Channel
23165
20.83
20.79
20.93
19.9
19.89
19.93
19.89
19.81
19.77
19.9
18.89
18.88
18.9
18.84
Channel
23155
20.83
20.8
20.93
19.9
19.9
19.86
19.9
19.78
19.76
19.87
18.9
18.88
18.87
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
62 of 117
Bandwidth
Modulation
QPSK
10MHz
16QAM
25
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
18.83
Channel
23060
20.73
20.82
20.95
19.83
19.87
19.92
19.84
19.63
19.69
19.86
18.79
18.86
18.93
18.81
18.84
Channel
23095
20.76
20.83
20.93
19.85
19.87
19.89
19.87
19.68
19.76
19.88
18.84
18.89
18.91
18.86
18.93
Channel
23130
20.76
20.88
20.94
19.81
19.76
19.9
19.84
19.73
19.84
19.94
18.83
18.79
18.91
18.78
19.5
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
63 of 117
LTE FDD Band 13
Bandwidth
Modulation
QPSK
5MHz
16QAM
Bandwidth
Modulation
QPSK
10MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
12
12
12
25
12
12
12
25
13
24
13
13
24
13
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
Channel
23205
20.79
20.89
20.92
19.88
19.88
19.96
19.91
19.71
19.8
19.82
18.87
18.88
18.9
18.87
Channel
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Channel
23230
20.91
20.79
20.87
19.87
19.78
19.81
19.84
19.76
19.76
19.82
18.86
18.78
18.8
18.82
Channel
23230
20.8
20.8
20.79
19.85
19.93
19.82
19.92
19.74
19.73
19.72
18.91
18.93
18.78
18.9
Channel
23255
20.81
20.87
20.74
19.77
19.9
19.82
19.76
19.68
19.8
19.69
18.79
18.89
18.79
18.81
Channel
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
64 of 117
LTE FDD Band 17
Bandwidth
Modulation
QPSK
5MHz
16QAM
Bandwidth
Modulation
QPSK
10MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
12
12
12
25
12
12
12
25
13
24
13
13
24
13
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
Channel
23755
20.79
20.88
20.88
19.88
19.85
19.92
19.93
19.74
19.84
19.8
18.87
18.88
18.88
18.85
Channel
23780
20.9
20.89
20.85
19.87
19.92
19.83
19.85
19.84
19.8
19.79
18.88
18.86
18.87
18.85
Channel
23790
20.88
20.82
20.85
19.82
19.84
19.9
19.88
19.72
19.76
19.72
18.86
18.86
18.85
18.84
Channel
23790
20.82
20.85
20.9
19.86
19.84
19.89
19.88
19.75
19.8
19.92
18.88
18.85
18.84
18.79
Channel
23825
20.83
20.86
20.87
19.85
19.78
19.89
19.81
19.76
19.81
19.83
18.81
18.81
18.87
18.83
Channel
23800
20.82
20.84
20.94
19.83
19.78
19.88
19.85
19.71
19.74
19.86
18.84
18.85
18.83
18.8
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
Tune up
21.5
21.5
21.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
19.5
19.5
19.5
19.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
65 of 117
LTE Band 25
Bandwidth
Modulation
QPSK
1.4MHz
16QAM
Bandwidth
Modulation
QPSK
3MHz
16QAM
Bandwidth
Modulation
QPSK
5MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
RB size
RB offset
15
15
14
14
RB size
RB offset
12
12
12
25
12
12
12
25
13
24
13
13
24
13
Channel
26047
21.44
21.41
21.45
21.42
21.41
21.45
20.54
20.4
20.39
20.42
20.44
20.39
20.43
19.39
Channel
26055
21.4
21.38
21.37
20.5
20.49
20.45
20.44
20.38
20.33
20.38
19.47
19.5
19.49
19.42
Channel
26065
21.39
21.35
21.36
20.51
20.44
20.45
20.43
20.33
20.34
20.32
19.48
19.49
19.48
19.48
Channel
26365
21.44
21.43
21.44
21.46
21.41
21.46
20.53
20.39
20.4
20.37
20.4
20.41
20.44
19.38
Channel
26365
21.41
21.37
21.41
20.45
20.45
20.48
20.5
20.34
20.31
20.36
19.44
19.48
19.48
19.42
Channel
26365
21.37
21.33
21.41
20.48
20.46
20.42
20.45
20.36
20.3
20.33
19.45
19.44
19.46
19.41
Channel
26683
21.31
21.28
21.27
21.32
21.27
21.34
20.26
20.26
20.24
20.18
20.23
20.19
20.18
19.16
Channel
26675
21.33
21.27
21.25
20.3
20.26
20.28
20.31
20.19
20.22
20.16
19.31
19.3
19.27
19.24
Channel
26665
21.32
21.28
21.22
20.3
20.31
20.27
20.3
20.2
20.24
20.19
19.36
19.32
19.27
19.3
Tune up
22.5
22.5
22.5
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
66 of 117
Bandwidth
Modulation
QPSK
10MHz
16QAM
Bandwidth
Modulation
QPSK
15MHz
16QAM
Bandwidth
Modulation
QPSK
20MHz
16QAM
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
RB size
RB offset
36
36
36
75
36
36
36
75
38
74
18
39
38
74
18
39
RB size
RB offset
50
50
50
100
50
50
50
100
50
99
25
50
50
99
25
50
Channel
26090
21.4
21.38
21.34
20.46
20.49
20.44
20.44
20.35
20.38
20.37
19.47
19.45
19.43
19.4
Channel
26115
21.42
21.41
21.32
20.52
20.51
20.43
20.44
20.41
20.36
20.29
19.48
19.48
19.4
19.45
Channel
26140
21.42
21.4
21.29
20.48
20.45
20.43
20.45
20.39
20.29
20.28
19.44
19.42
19.39
19.41
Channel
26365
21.41
21.35
21.4
20.44
20.45
20.48
20.46
20.34
20.32
20.39
19.45
19.42
19.45
19.44
Channel
26365
21.41
21.4
21.44
20.45
20.45
20.47
20.43
20.44
20.36
20.44
19.41
19.42
19.44
19.46
Channel
26365
21.4
21.38
21.36
20.49
20.46
20.43
20.43
20.37
20.32
20.31
19.46
19.43
19.42
19.49
Channel
26640
21.38
21.32
21.25
20.3
20.35
20.29
20.32
20.35
20.26
20.15
19.36
19.34
19.34
19.34
Channel
26615
21.4
21.43
21.28
20.37
20.3
20.31
20.4
20.37
20.35
20.18
19.32
19.28
19.32
19.38
Channel
26590
21.45
21.35
21.24
20.51
20.35
20.27
20.35
20.5
20.31
20.15
19.46
19.34
19.26
19.32
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
67 of 117
LTE Band 38
Bandwidth
Modulation
QPSK
5MHz
16QAM
Bandwidth
Modulation
QPSK
10MHz
16QAM
Bandwidth
Modulation
QPSK
15MHz
16QAM
Conducted Power(dBm)
RB size
RB offset
12
12
12
25
12
12
12
25
13
24
13
13
24
13
RB size
RB offset
25
25
25
50
25
25
25
50
25
49
13
25
25
49
13
25
RB size
RB offset
36
36
36
75
36
36
36
75
38
74
18
39
38
74
18
39
Channel
37775
21.71
21.66
21.67
20.63
20.59
20.54
20.59
20.33
20.33
20.34
19.48
19.45
19.48
19.47
Channel
37800
21.68
21.71
21.71
20.63
20.63
20.56
20.57
20.39
20.31
20.37
19.51
19.46
19.48
19.48
Channel
37825
21.73
21.71
21.73
20.6
20.61
20.54
20.61
20.31
20.28
20.3
19.42
19.42
19.41
19.41
Channel
38000
21.67
21.8
21.74
20.6
20.57
20.68
20.6
20.41
20.48
20.5
19.43
19.46
19.58
19.5
Channel
38000
21.59
21.8
21.7
20.58
20.62
20.56
20.6
20.31
20.45
20.3
19.51
19.5
19.5
19.39
Channel
38000
21.62
21.78
21.71
20.66
20.62
20.55
20.55
20.29
20.45
20.39
19.42
19.43
19.34
19.34
Channel
38225
21.67
21.67
21.57
20.54
20.5
20.5
20.59
20.28
20.33
20.3
19.43
19.41
19.4
19.45
Channel
38200
21.53
21.67
21.67
20.56
20.66
20.6
20.62
20.22
20.35
20.28
19.43
19.49
19.43
19.41
Channel
38175
21.69
21.65
21.74
20.48
20.51
20.58
20.53
20.41
20.24
20.27
19.26
19.29
19.37
19.37
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
68 of 117
Bandwidth
Modulation
QPSK
20MHz
16QAM
RB size
RB offset
50
50
50
100
50
50
50
100
50
99
25
50
50
99
25
50
Channel
37850
21.67
21.65
21.71
20.56
20.58
20.54
20.54
20.34
20.26
20.34
19.39
19.4
19.37
19.38
Channel
38000
21.61
21.78
21.72
20.67
20.59
20.51
20.62
20.36
20.48
20.36
19.47
19.39
19.37
19.48
Channel
38150
21.51
21.51
21.62
20.57
20.6
20.57
20.54
20.2
20.2
20.25
19.32
19.36
19.42
19.39
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
69 of 117
LTE FDD Band 41
Bandwidth
Modulation
QPSK
5MHz
16QAM
Bandwidth
Modulation
QPSK
10MHz
16QAM
Bandwidth
Modulation
QPSK
15MHz
16QAM
RB size
12
12
12
25
12
12
12
25
RB size
25
25
25
50
25
25
25
50
RB size
36
36
36
75
36
36
36
75
Conducted Power(dBm)
RB
offset
13
24
13
13
24
13
RB
offset
25
49
13
25
25
49
13
25
RB
offset
38
74
18
39
38
74
18
39
Channel
39675
20.8
20.81
20.82
19.68
19.64
19.67
19.73
19.46
19.43
19.46
18.68
18.61
18.66
18.65
Channel
39700
20.81
20.81
20.99
19.69
19.71
19.75
19.74
19.5
19.44
19.57
18.65
18.7
18.71
18.58
Channel
39725
20.87
20.93
21.12
19.74
19.75
19.85
19.8
19.44
19.48
19.65
18.59
18.59
18.7
18.68
Channel
40148
21.69
21.71
21.7
20.62
20.61
20.67
20.6
20.39
20.39
20.42
19.52
19.55
19.58
19.55
Channel
40160
21.66
21.72
21.84
20.64
20.67
20.63
20.61
20.36
20.4
20.47
19.58
19.59
19.62
19.5
Channel
40173
21.72
21.82
21.96
20.61
20.63
20.69
20.62
20.32
20.41
20.47
19.44
19.49
19.52
19.49
Channel
40620
21.64
21.76
21.77
20.62
20.63
20.58
20.59
20.28
20.38
20.5
19.52
19.53
19.56
19.54
Channel
40620
21.69
21.72
21.8
20.49
20.62
20.72
20.62
20.37
20.41
20.49
19.49
19.52
19.63
19.48
Channel
40620
21.71
21.77
21.82
20.5
20.72
20.68
20.69
20.33
20.38
20.45
19.45
19.59
19.57
19.51
Channel
41093
21.88
21.82
21.86
20.74
20.7
20.76
20.81
20.48
20.48
20.55
19.61
19.56
19.69
19.67
Channel
41080
21.81
21.9
21.97
20.68
20.75
20.75
20.76
20.46
20.48
20.53
19.54
19.6
19.71
19.54
Channel
41068
21.77
21.91
21.95
20.65
20.64
20.78
20.73
20.38
20.48
20.51
19.43
19.42
19.68
19.58
Channel
41565
21.66
21.7
21.66
20.52
20.57
20.56
20.58
20.3
20.29
20.37
19.5
19.46
19.5
19.53
Channel
41540
21.66
21.69
21.75
20.55
20.58
20.53
20.51
20.3
20.27
20.31
19.51
19.44
19.48
19.45
Channel
41515
21.69
21.67
21.8
20.51
20.52
20.51
20.52
20.27
20.27
20.27
19.4
19.35
19.42
19.39
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
70 of 117
Bandwidth
Modulation
QPSK
20MHz
16QAM
RB size
50
50
50
100
50
50
50
100
RB
offset
50
99
25
50
50
99
25
50
Channel
39750
20.77
20.93
21.15
19.75
19.81
19.92
19.82
19.47
19.56
19.8
18.58
18.7
18.77
18.73
Channel
40185
21.63
21.78
21.91
20.67
20.66
20.64
20.7
20.32
20.39
20.52
19.48
19.53
19.54
19.51
Channel
40620
21.68
21.76
21.73
20.6
20.66
20.69
20.64
20.4
20.36
20.4
19.4
19.46
19.57
19.5
Channel
41055
21.77
21.77
21.89
20.63
20.61
20.75
20.68
20.44
20.41
20.5
19.38
19.47
19.63
19.48
Channel
41490
21.65
21.65
21.68
20.56
20.54
20.5
20.53
20.31
20.2
20.24
19.4
19.39
19.38
19.42
Tune up
22.5
22.5
22.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
20.5
20.5
20.5
20.5
Table 12: Conducted Power Of LTE
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
71 of 117
5.3.5 Conducted Power Of WIFI and BT
Mode
802.11b
802.11g
802.11n
HT20 SISO
Channel
Frequency(MHz)
11
11
11
2412
2437
2462
2412
2437
2462
2412
2437
2462
Frequency(MHz)
Mode
802.11a
Channel
Data
Rate(Mbps)
Tune up
16
14
6.5
13
Data
Rate(Mbps)
Tune up
Average
Power (dBm)
15.05
15.15
15.02
13.75
13.71
13.89
12.61
12.6
12.62
Average
Power (dBm)
36
5180
13.5
13.364
40
5200
13.5
13.331
44
5220
13.5
13.308
48
5240
13.5
13.012
52
5260
13.5
13.221
56
5280
13.5
13.214
60
5300
13.5
13.028
64
5320
13.5
13.056
100
5500
13.5
12.919
104
5520
13.5
12.923
108
5540
13.5
12.892
112
5560
13.5
12.987
116
5580
13.5
13.265
120
5600
13.5
13.203
124
5620
13.5
13.152
128
5640
13.5
12.984
132
5660
13.5
12.907
136
5680
13.5
12.882
140
5700
13.5
12.921
144
5720
13.5
12.993
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
72 of 117
Frequency(MHz)
Mode
Channel
802.11nHT20
Data
Rate(Mbps)
Tune up
Average
Power (dBm)
36
5180
MCS0
12.5
12.365
40
5200
MCS0
12.5
12.347
44
5220
MCS0
12.5
12.299
48
5240
MCS0
12.5
12.108
52
5260
MCS0
12.5
12.189
56
5280
MCS0
12.5
12.123
60
5300
MCS0
12.5
12.142
64
5320
MCS0
12.5
12.211
100
5500
MCS0
12.5
12.191
104
5520
MCS0
12.5
12.259
108
5540
MCS0
12.5
12.369
112
5560
MCS0
12.5
12.389
116
5580
MCS0
12.5
12.359
120
5600
MCS0
12.5
12.401
124
5620
MCS0
12.5
12.216
128
5640
MCS0
12.5
12.365
132
5660
MCS0
12.5
12.347
136
5680
MCS0
12.5
12.299
140
5700
MCS0
12.5
12.108
144
5720
MCS0
12.5
12.189
Table 13: Conducted Power Of WIFI
BT
Band
BT
BLE
Average Conducted Power(dBm)
Channel
GFSK
π/4DQPSK
8DPSK
Tune up
39
78
19
39
5.729
5.756
5.709
-11.397
-2.699
-5.941
4.312
4.338
4.309
4.318
4.28
4.303
6.5
Table 14: Conducted Power Of BT
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
73 of 117
5.4 Measurement of SAR Data
5.4.1 SAR Result Of GSM850
The Original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
SAR
(W/kg)
1-g
Duty
Cycle
Power
Drift
(dB)
Cond
ucted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
Head Test data
Left touch
cheek
Left tilted 15
degree
Right touch
cheek
Right tilted
15 degree
GSM
190/836.6
1:8.3
0.00781
0.02
31.35
32
1.161
0.009
22.1
1.6
GSM
190/836.6
1:8.3
0.00272
0.07
31.35
32
1.161
0.003
22.1
1.6
GSM
190/836.6
1:8.3
0.00572
0.06
31.35
32
1.161
0.007
22.1
1.6
GSM
190/836.6
1:8.3
0.00135
-0.08
31.35
32
1.161
0.002
22.1
1.6
Body worn Test data(Separate 15mm)
Front side
GSM
190/836.6
1:8.3
0.0169
-0.13
31.35
32
1.161
0.020
22.1
1.6
Back side
GSM
190/836.6
1:8.3
0.021
-0.06
31.35
32
1.161
0.024
22.1
1.6
Hotspot Test data(Separate 10mm)
Front side
Back side
Left side
Right side
Bottom side
GPRS
4TS
GPRS
4TS
GPRS
4TS
GPRS
4TS
GPRS
4TS
190/836.6
1:2.075
0.0612
-0.09
27.89
28.5
1.151
0.070
22.1
1.6
190/836.6
1:2.075
0.083
-0.07
27.89
28.5
1.151
0.096
22.1
1.6
190/836.6
1:2.075
0.0287
0.08
27.89
28.5
1.151
0.033
22.1
1.6
190/836.6
1:2.075
0.015
-0.04
27.89
28.5
1.151
0.017
22.1
1.6
190/836.6
1:2.075
0.0448
0.13
27.89
28.5
1.151
0.052
22.1
1.6
Power
Drift
(dB)
Cond
ucted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
32
1.161
0.022
22.1
1.6
1.161
0.050
22.1
1.6
1.151
0.155
22.1
1.6
Verify worst case of original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
SAR
(W/kg)
1-g
Duty
Cycle
Head Test data at the worst case
Left touch
cheek
GSM
190/836.6
1:8.3
0.019
-0.03
31.35
Body worn Test data at the worst case (Separate 15mm)
Back side
GSM
190/836.6
1:8.3
0.043
0.19
31.35
32
Hotspot Test data at the worst case (Separate 10mm)
Back side
GPRS
4TS
190/836.6
1:2.075
0.135
0.01
27.89
28.5
Table 15: SAR of GSM850 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
74 of 117
2) Per FCC KDB Publication 447498 D01, if the reported (scaled) SAR measured at the middle channel or highest
output power channel for each test configuration is ≤ 0.8 W/kg then testing at the other channels is not required for
such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
75 of 117
5.4.2
SAR Result Of GSM1900
The original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Condu
cted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
Head Test data
Left touch
cheek
Left tilted 15
degree
Right touch
cheek
Right tilted
15 degree
GSM
661/1880
1:8.3
0.0649
0.12
30.72
31
1.067
0.069
22.3
1.6
GSM
661/1880
1:8.3
0.0263
0.05
30.72
31
1.067
0.028
22.3
1.6
GSM
661/1880
1:8.3
0.075
0.17
30.72
31
1.067
0.080
22.3
1.6
GSM
661/1880
1:8.3
0.0269
-0.14
30.72
31
1.067
0.029
22.3
1.6
Body worn Test data(Separate 15mm)
Front side
GSM
661/1880
1:8.3
0.109
30.72
31
1.067
0.116
22.3
1.6
Back side
GSM
661/1880
1:8.3
0.151
0.11
30.72
31
1.067
0.161
22.3
1.6
Hotspot Test data(Separate 10mm)
Front side
Back side
Left side
Right side
Bottom side
Bottom side
Bottom side
Bottom
side-repeat
GPRS
2TS
GPRS
2TS
GPRS
2TS
GPRS
2TS
GPRS
2TS
GPRS
2TS
GPRS
2TS
GPRS
2TS
661/1880
1:4.15
0.372
0.03
30.73
31
1.064
0.396
22.3
1.6
661/1880
1:4.15
0.545
0.05
30.73
31
1.064
0.580
22.3
1.6
661/1880
1:4.15
0.285
0.06
30.73
31
1.064
0.303
22.3
1.6
661/1880
1:4.15
0.0593
-0.08
30.73
31
1.064
0.063
22.3
1.6
661/1880
1:4.15
0.981
-0.02
30.73
31
1.064
1.044
22.3
1.6
512/1850.2
1:4.15
1.27
0.09
30.44
31
1.138
1.445
22.3
1.6
810/1909.8
1:4.15
0.832
-0.02
30.35
31
1.161
0.966
22.3
1.6
512/1850.2
1:4.15
1.24
0.06
30.44
31
1.138
1.411
22.3
1.6
Power
Drift
(dB)
Condu
cted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
31
1.072
0.042
22.3
1.6
1.072
0.275
22.3
1.6
1.112
1.434
22.3
1.6
Verify worst case of original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Head Test data at the worst case
Right touch
cheek
GSM
661/1880
1:8.3
0.039
0.03
30.7
Body worn Test data at the worst case (Separate 15mm)
Back side
GSM
661/1880
1:8.3
0.257
-0.1
30.7
31
Hotspot Test data at the worst case (Separate 10mm)
Bottom side
GPRS
2TS
512/1850.2
1:4.15
1.29
-0.05
30.54
31
Table 16: SAR of GSM1900 for Head and Body.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
76 of 117
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) Per FCC KDB Publication 447498 D01, if the reported (scaled) SAR measured at the middle channel or highest
output power channel for each test configuration is ≤ 0.8 W/kg then testing at the other channels is not required for
such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
77 of 117
5.4.3 SAR Result Of WCDMA Band 2
The original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Condu
cted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
Head Test data
Left touch
cheek
Left tilted 15
degree
Right touch
cheek
Right tilted
15 degree
RMC
9400/1880
1:1
0.0401
0.07
23.04
23.5
1.112
0.045
22.3
1.6
RMC
9400/1880
1:1
0.0151
0.18
23.04
23.5
1.112
0.017
22.3
1.6
RMC
9400/1880
1:1
0.042
-0.14
23.04
23.5
1.112
0.047
22.3
1.6
RMC
9400/1880
1:1
0.0146
0.08
23.04
23.5
1.112
0.016
22.3
1.6
Body worn Test data(Separate 15mm)
Front side
RMC
9400/1880
1:1
0.0771
-0.15
23.04
23.5
1.112
0.086
22.3
1.6
Back side
RMC
9400/1880
1:1
0.104
-0.06
23.04
23.5
1.112
0.116
22.3
1.6
Hotspot Test data(Separate 10mm)
Front side
RMC
9400/1880
1:1
0.143
0.08
23.04
23.5
1.112
0.159
22.3
1.6
Back side
RMC
9400/1880
1:1
0.192
-0.11
23.04
23.5
1.112
0.213
22.3
1.6
Left side
RMC
9400/1880
1:1
0.109
-0.06
23.04
23.5
1.112
0.121
22.3
1.6
Right side
RMC
9400/1880
1:1
0.0236
-0.05
23.04
23.5
1.112
0.026
22.3
1.6
Bottom side
RMC
9400/1880
1:1
0.26
0.1
23.04
23.5
1.112
0.289
22.3
1.6
Power
Drift
(dB)
Condu
cted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
1.167
0.026
22.3
1.6
0.165
22.3
1.6
0.223
22.3
1.6
Verify worst case of original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Head Test data at the worst case
Right touch
cheek
RMC
9400/1880
1:1
0.022
0.02
22.83
23.5
Body worn Test data at the worst case (Separate 15mm)
Back side
RMC
9400/1880
1:1
0.141
0.02
22.83
23.5
1.167
Hotspot Test data at the worst case (Separate 10mm)
Bottom side
RMC
9400/1880
1:1
0.191
0.08
22.83
23.5
1.167
Table 17: SAR of WCDMA1900 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph Results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
78 of 117
5.4.4 SAR Result Of WCDMA Band 4
The original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Condu
cted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
Head Test data
Left touch
cheek
Left tilted 15
degree
Right touch
cheek
Right tilted
15 degree
RMC
1412/1732.4
1:1
0.067
0.09
22.88
23.5
1.153
0.077
22.2
1.6
RMC
1412/1732.4
1:1
0.0175
-0.13
22.88
23.5
1.153
0.020
22.2
1.6
RMC
1412/1732.4
1:1
0.0445
0.08
22.88
23.5
1.153
0.051
22.2
1.6
RMC
1412/1732.4
1:1
0.025
0.19
22.88
23.5
1.153
0.029
22.2
1.6
Body worn Test data(Separate 15mm)
Front side
RMC
1412/1732.4
1:1
0.0795
-0.09
22.88
23.5
1.153
0.092
22.2
1.6
Back side
RMC
1412/1732.4
1:1
0.119
0.11
22.88
23.5
1.153
0.137
22.2
1.6
Hotspot Test data(Separate 10mm)
Front side
RMC
1412/1732.4
1:1
0.164
-0.02
22.88
23.5
1.153
0.189
22.2
1.6
Back side
RMC
1412/1732.4
1:1
0.227
0.02
22.88
23.5
1.153
0.262
22.2
1.6
Left side
RMC
1412/1732.4
1:1
0.119
0.2
22.88
23.5
1.153
0.137
22.2
1.6
Right side
RMC
1412/1732.4
1:1
0.0194
0.06
22.88
23.5
1.153
0.022
22.2
1.6
Bottom side
RMC
1412/1732.4
1:1
0.437
-0.05
22.88
23.5
1.153
0.504
22.2
1.6
Power
Drift
(dB)
Condu
cted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
1.279
0.052
22.2
1.6
0.109
22.2
1.6
0.453
22.2
1.6
Verify worst case of original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Head Test data at the worst case
Left touch
cheek
RMC
1412/1732.4
1:1
0.041
0.01
22.43
23.5
Body worn Test data at the worst case (Separate 15mm)
Back side
RMC
1412/1732.4
1:1
0.085
-0.03
22.43
23.5
1.279
Hotspot Test data at the worst case (Separate 10mm)
Bottom side
RMC
1412/1732.4
1:1
0.354
-0.01
22.43
23.5
1.279
Table 18: SAR of WCDMA1700 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph Results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
79 of 117
5.4.1 SAR Result Of WCDMA Band 5
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conducted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
Head Test data
Left cheek
RMC
4182/836.4
1:1
0.0342
-0.09
21.96
22.5
1.132
0.039
22.1
1.6
Left tilted
RMC
4182/836.4
1:1
0.0232
0.03
21.96
22.5
1.132
0.026
22.1
1.6
Right cheek
RMC
4182/836.4
1:1
0.040
0.05
21.96
22.5
1.132
0.045
22.1
1.6
Right tilted
RMC
4182/836.4
1:1
0.0258
0.03
21.96
22.5
1.132
0.029
22.1
1.6
Body worn Test data(Separate 15mm)
Front side
RMC
4182/836.4
1:1
0.0206
-0.06
21.96
22.5
1.132
0.023
22.1
1.6
Back side
RMC
4182/836.4
1:1
0.025
0.09
21.96
22.5
1.132
0.028
22.1
1.6
Hotspot Test data(Separate 10mm)
Front side
RMC
4182/836.4
1:1
0.0247
0.08
21.96
22.5
1.132
0.028
22.1
1.6
Back side
RMC
4182/836.4
1:1
0.034
-0.02
21.96
22.5
1.132
0.039
22.1
1.6
Left side
RMC
4182/836.4
1:1
0.0186
0.09
21.96
22.5
1.132
0.021
22.1
1.6
Right side
RMC
4182/836.4
1:1
0.0285
0.18
21.96
22.5
1.132
0.032
22.1
1.6
Bottom side
RMC
4182/836.4
1:1
0.0192
0.07
21.96
22.5
1.132
0.022
22.1
1.6
Table 19: SAR of WCDMA850 for Head and Body.
Note:
1)The maximum Scaled SAR value is marked in bold. Graph Results refer to Appendix B
2)If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
80 of 117
5.4.2 SAR Result Of CDMA BC0
The original Report SZEM170400351906
Test
position
Test mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conduc
ted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
Head Test data
Left touch
cheek
1xRTT
(RC3 SO55)
384/836.52
1:1
0.015
0.08
21.58
22
1.102
0.017
22.1
1.6
Left tilted 15
degree
1xRTT
(RC3 SO55)
384/836.52
1:1
0.00459
0.07
21.58
22
1.102
0.005
22.1
1.6
Right touch
cheek
1xRTT
(RC3 SO55)
384/836.52
1:1
0.00946
0.01
21.58
22
1.102
0.010
22.1
1.6
Right tilted
15 degree
1xRTT
(RC3 SO55)
384/836.52
1:1
0.00292
21.58
22
1.102
0.003
22.1
1.6
Body worn Test data(Separate 15mm)
Front side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.0322
0.14
21.52
22
1.117
0.036
22.1
1.6
Back side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.037
-0.02
21.52
22
1.117
0.041
22.1
1.6
Hotspot Test data(Separate 10mm)
Front side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.0553
0.05
21.52
22
1.117
0.062
22.1
1.6
Back side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.068
-0.09
21.52
22
1.117
0.076
22.1
1.6
Left side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.0247
21.52
22
1.117
0.028
22.1
1.6
Right side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.0118
-0.19
21.52
22
1.117
0.013
22.1
1.6
Bottom side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.0355
-0.03
21.52
22
1.117
0.040
22.1
1.6
Power
Drift
(dB)
Conduc
ted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
22
1.102
0.028
22.1
1.6
1.117
0.056
22.1
1.6
1.117
0.074
22.1
1.6
Verify worst case of original Report SZEM170400351906
Test
position
Test mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)1g
Head Test data at the worst case
Left touch
cheek
1xRTT
(RC3 SO55)
384/836.52
1:1
0.025
0.05
21.58
Body worn Test data at the worst case (Separate 15mm)
Back side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.050
-0.02
21.52
22
Hotspot Test data at the worst case (Separate 10mm)
Back side
1xRTT
(RC3 SO32)
384/836.52
1:1
0.066
0.1
21.52
22
Table 20: SAR of CDMA BC0 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph Results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
81 of 117
5.4.3 SAR Result Of CDMA BC1
The original Report SZEM170400351906
Test position
Test mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Condu
cted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
Head Test data
Left touch
cheek
1xRTT
(RC3 SO55)
600/1880
1:1
0.0486
0.04
21.6
22
1.096
0.053
22.3
1.6
Left tilted 15
degree
1xRTT
(RC3 SO55)
600/1880
1:1
0.0175
0.19
21.6
22
1.096
0.019
22.3
1.6
Right touch
cheek
1xRTT
(RC3 SO55)
600/1880
1:1
0.0617
0.07
21.6
22
1.096
0.068
22.3
1.6
Right tilted 15
degree
1xRTT
(RC3 SO55)
600/1880
1:1
0.0179
0.05
21.6
22
1.096
0.020
22.3
1.6
Body worn Test data(Separate 15mm)
Front side
1xRTT
(RC3 SO32)
600/1880
1:1
0.0787
-0.04
21.6
22
1.096
0.086
22.3
1.6
Back side
1xRTT
(RC3 SO32)
600/1880
1:1
0.105
-0.02
21.6
22
1.096
0.115
22.3
1.6
Hotspot Test data(Separate 10mm)
Front side
1xRTT
(RC3 SO32)
600/1880
1:1
0.159
0.14
21.6
22
1.096
0.174
22.3
1.6
Back side
1xRTT
(RC3 SO32)
600/1880
1:1
0.19
0.06
21.6
22
1.096
0.208
22.3
1.6
Left side
1xRTT
(RC3 SO32)
600/1880
1:1
0.121
0.01
21.6
22
1.096
0.133
22.3
1.6
Right side
1xRTT
(RC3 SO32)
600/1880
1:1
0.0219
-0.06
21.6
22
1.096
0.024
22.3
1.6
Bottom side
1xRTT
(RC3 SO32)
600/1880
1:1
0.446
0.1
21.6
22
1.096
0.489
22.3
1.6
Power
Drift
(dB)
Condu
cted
Power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp
SAR
limit
(W/kg)
22
1.096
0.026
22.3
1.6
1.096
0.106
22.3
1.6
1.096
0.389
22.3
1.6
Verify worst case of original Report SZEM170400351906
Test position
Test mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Head Test data at the worst case
Right touch
cheek
1xRTT
(RC3 SO55)
600/1880
1:1
0.024
-0.04
21.6
Body worn Test data at the worst case (Separate 15mm)
Back side
1xRTT
(RC3 SO32)
600/1880
1:1
0.097
-0.08
21.6
22
Hotspot Test data at the worst case (Separate 10mm)
Bottom side
1xRTT
(RC3 SO32)
600/1880
1:1
0.355
-0.09
21.6
22
Table 21: SAR of CDMA BC1 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph Results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
82 of 117
5.4.4 SAR Result Of LTE Band 2
The original Report SZEM170400351906
Test position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conducte
d power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_0 offset)
Left touch
cheek
20
QPSK
18900/1880
1:1
0.0725
0.13
22.21
22.5
1.069
0.078
22.3
1.6
Left tilted 15
degree
20
QPSK
18900/1880
1:1
0.0232
0.13
22.21
22.5
1.069
0.025
22.3
1.6
Right touch
cheek
20
QPSK
18900/1880
1:1
0.080
0.07
22.21
22.5
1.069
0.086
22.3
1.6
Right tilted 15
degree
20
QPSK
18900/1880
1:1
0.0284
0.15
22.21
22.5
1.069
0.030
22.3
1.6
Head Test data(50%RB)
Left touch
cheek
20
QPSK
18900/1880
1:1
0.0541
-0.04
21.34
21.5
1.038
0.056
22.3
1.6
Left tilted 15
degree
20
QPSK
18900/1880
1:1
0.0174
-0.12
21.34
21.5
1.038
0.018
22.3
1.6
Right touch
cheek
20
QPSK
18900/1880
1:1
0.0613
0.07
21.34
21.5
1.038
0.064
22.3
1.6
Right tilted 15
degree
20
QPSK
18900/1880
1:1
0.0207
0.08
21.34
21.5
1.038
0.021
22.3
1.6
Body worn Test data(Separate 15mm 1RB_0 offset)
Front side
20
QPSK
18900/1880
1:1
0.144
-0.05
22.21
22.5
1.069
0.154
22.3
1.6
Back side
20
QPSK
18900/1880
1:1
0.186
0.05
22.21
22.5
1.069
0.199
22.3
1.6
Body worn Test data (Separate 15mm 50%RB)
Front side
20
QPSK
18900/1880
1:1
0.112
0.07
21.34
21.5
1.038
0.116
22.3
1.6
Back side
20
QPSK
18900/1880
1:1
0.146
0.09
21.34
21.5
1.038
0.151
22.3
1.6
Hotspot Test data(Separate 10mm 1RB_0 offset)
Front side
20
QPSK
18900/1880
1:1
0.248
-0.07
22.21
22.5
1.069
0.265
22.3
1.6
Back side
20
QPSK
18900/1880
1:1
0.322
0.03
22.21
22.5
1.069
0.344
22.3
1.6
Left side
20
QPSK
18900/1880
1:1
0.178
-0.11
22.21
22.5
1.069
0.190
22.3
1.6
Right side
20
QPSK
18900/1880
1:1
0.0416
0.11
22.21
22.5
1.069
0.044
22.3
1.6
Bottom side
20
QPSK
18900/1880
1:1
0.691
22.21
22.5
1.069
0.739
22.3
1.6
Hotspot Test data (Separate 10mm 50%RB)
Front side
20
QPSK
18900/1880
1:1
0.191
0.09
21.34
21.5
1.038
0.198
22.3
1.6
Back side
20
QPSK
18900/1880
1:1
0.251
0.03
21.34
21.5
1.038
0.260
22.3
1.6
Left side
20
QPSK
18900/1880
1:1
0.141
0.08
21.34
21.5
1.038
0.146
22.3
1.6
Right side
20
QPSK
18900/1880
1:1
0.0327
0.08
21.34
21.5
1.038
0.034
22.3
1.6
Bottom side
20
QPSK
18900/1880
1:1
0.366
0.01
21.34
21.5
1.038
0.380
22.3
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
83 of 117
Verify worst case of original Report SZEM170400351906
Test position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift(d
B)
Conducte
d power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
1.236
0.059
22.3
1.6
0.324
22.3
1.6
0.974
22.3
1.6
Head Test data at the worst case (1RB_0 offset)
Right touch
cheek
20
QPSK
18900/1880
1:1
0.048
0.04
21.58
22.5
Body worn Test data at the worst case (Separate 15mm 1RB_0 offset)
Back side
20
QPSK
18900/1880
1:1
0.262
0.09
21.58
22.5
1.236
Hotspot Test data at the worst case (Separate 10mm 1RB_0 offset)
Bottom side
20
QPSK
18900/1880
1:1
0.788
-0.08
21.58
22.5
1.236
Table 22: SAR of LTE band 2 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
84 of 117
5.4.1 SAR Result Of LTE Band 4
The original Report SZEM170400351906
Test
position
W.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Cond
ucted
power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_0 offset)
Left touch
cheek
20
QPSK
20300/1745
1:1
0.107
-0.01
21.86
22
1.033
0.111
22.2
1.6
Left tilted
15 degree
20
QPSK
20300/1745
1:1
0.0378
0.03
21.86
22
1.033
0.039
22.2
1.6
Right touch
cheek
20
QPSK
20300/1745
1:1
0.0843
0.06
21.86
22
1.033
0.087
22.2
1.6
Right tilted
15 degree
20
QPSK
20300/1745
1:1
0.0457
0.08
21.86
22
1.033
0.047
22.2
1.6
Head Test data(50%RB)
Left touch
cheek
20
QPSK
20300/1745
1:1
0.0839
0.08
20.82
21
1.042
0.087
22.2
1.6
Left tilted
15 degree
20
QPSK
20300/1745
1:1
0.0302
0.11
20.82
21
1.042
0.031
22.2
1.6
Right touch
cheek
20
QPSK
20300/1745
1:1
0.0668
0.19
20.82
21
1.042
0.070
22.2
1.6
Right tilted
15 degree
20
QPSK
20300/1745
1:1
0.0351
0.06
20.82
21
1.042
0.037
22.2
1.6
Body worn Test data(Separate 15mm 1RB_0 offset)
Front side
20
QPSK
20300/1745
1:1
0.159
-0.02
21.86
22
1.033
0.164
22.2
1.6
Back side
20
QPSK
20300/1745
1:1
0.216
0.06
21.86
22
1.033
0.223
22.2
1.6
Body worn Test data (Separate 15mm 50%RB)
Front side
20
QPSK
20300/1745
1:1
0.127
-0.06
20.82
21
1.042
0.132
22.2
1.6
Back side
20
QPSK
20300/1745
1:1
0.173
0.11
20.82
21
1.042
0.180
22.2
1.6
Hotspot Test data(Separate 10mm 1RB_0 offset)
Front side
20
QPSK
20300/1745
1:1
0.287
0.14
21.86
22
1.033
0.296
22.2
1.6
Back side
20
QPSK
20300/1745
1:1
0.412
0.18
21.86
22
1.033
0.425
22.2
1.6
Left side
20
QPSK
20300/1745
1:1
0.244
0.06
21.86
22
1.033
0.252
22.2
1.6
Right side
20
QPSK
20300/1745
1:1
0.0369
-0.11
21.86
22
1.033
0.038
22.2
1.6
Bottom side
20
QPSK
20300/1745
1:1
0.761
0.05
21.86
22
1.033
0.786
22.2
1.6
Hotspot Test data (Separate 10mm 50%RB)
Front side
20
QPSK
20300/1745
1:1
0.23
0.14
20.82
21
1.042
0.240
22.2
1.6
Back side
20
QPSK
20300/1745
1:1
0.32
-0.01
20.82
21
1.042
0.334
22.2
1.6
Left side
20
QPSK
20300/1745
1:1
0.2
-0.05
20.82
21
1.042
0.208
22.2
1.6
Right side
20
QPSK
20300/1745
1:1
0.0277
0.02
20.82
21
1.042
0.029
22.2
1.6
Bottom side
20
QPSK
20300/1745
1:1
0.616
-0.02
20.82
21
1.042
0.642
22.2
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
85 of 117
Verify worst case of original Report SZEM170400351906
Test
position
W.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Cond
ucted
power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
1.112
0.089
22.2
1.6
0.193
22.2
1.6
0.667
22.2
1.6
Head Test data at the worst case (1RB_0 offset)
Left touch
cheek
20
QPSK
20300/1745
1:1
0.08
0.04
21.54
22
Body worn Test data at the worst case (Separate 15mm 1RB_0 offset)
Back side
20
QPSK
20300/1745
1:1
0.174
0.17
21.54
22
1.112
Hotspot Test data at the worst case (Separate 10mm 1RB_0 offset)
Bottom side
20
QPSK
20300/1745
1:1
0.600
-0.03
21.54
22
1.112
Table 23: SAR of LTE band 4 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
86 of 117
5.4.2 SAR Result Of LTE Band 5
Test
position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conducted
power(dBm)
Tune up
Limit
(dBm)
Scaled
factor
Scaled
SAR(W/kg)
Liquid
Temp.
Head Test data(1RB_0 offset)
Left cheek
10
QPSK
20600/844
1:1
0.0233
0.02
20.72
21.5
1.197
0.028
22.1
Left tilted
10
QPSK
20600/844
1:1
0.0183
0.04
20.72
21.5
1.197
0.022
22.1
Right cheek
10
QPSK
20600/844
1:1
0.031
0.07
20.72
21.5
1.197
0.037
22.1
Right tilted
10
QPSK
20600/844
1:1
0.016
20.72
21.5
1.197
0.019
22.1
Head Test data(50%RB_25)
Left cheek
10
QPSK
20450/829
1:1
0.015
0.1
19.81
20.5
1.172
0.018
22.1
Left tilted
10
QPSK
20450/829
1:1
0.0117
0.07
19.81
20.5
1.172
0.014
22.1
Right cheek
10
QPSK
20450/829
1:1
0.0195
0.07
19.81
20.5
1.172
0.023
22.1
Right tilted
10
QPSK
20450/829
1:1
0.0128
0.12
19.81
20.5
1.172
0.015
22.1
Body worn Test data(Separate 15mm 1RB_0 offset)
Front side
10
QPSK
20600/844
1:1
0.0406
0.09
20.72
21.5
1.197
0.049
22.1
Back side
10
QPSK
20600/844
1:1
0.050
0.12
20.72
21.5
1.197
0.060
22.1
Body worn Test data (Separate 15mm 50%RB_25 offset)
Front side
10
QPSK
20450/829
1:1
0.0275
0.05
19.81
20.5
1.172
0.032
22.1
Back side
10
QPSK
20450/829
1:1
0.0354
0.09
19.81
20.5
1.172
0.041
22.1
Hotspot Test data(Separate 10mm 1RB_0 offset)
Front side
10
QPSK
20600/844
1:1
0.048
-0.04
20.72
21.5
1.197
0.057
22.1
Back side
10
QPSK
20600/844
1:1
0.063
0.05
20.72
21.5
1.197
0.075
22.1
Left side
10
QPSK
20600/844
1:1
0.0363
0.03
20.72
21.5
1.197
0.043
22.1
Right side
10
QPSK
20600/844
1:1
0.052
0.01
20.72
21.5
1.197
0.062
22.1
Bottom side
10
QPSK
20600/844
1:1
0.0354
0.04
20.72
21.5
1.197
0.042
22.1
Hotspot Test data (Separate 10mm 50%RB_25 offset)
Front side
10
QPSK
20450/829
1:1
0.0317
0.01
19.81
20.5
1.172
0.037
22.1
Back side
10
QPSK
20450/829
1:1
0.0441
0.04
19.81
20.5
1.172
0.052
22.1
Left side
10
QPSK
20450/829
1:1
0.025
0.08
19.81
20.5
1.172
0.029
22.1
Right side
10
QPSK
20450/829
1:1
0.0336
0.15
19.81
20.5
1.172
0.039
22.1
Bottom side
10
QPSK
20450/829
1:1
0.0233
0.03
19.81
20.5
1.172
0.027
22.1
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
87 of 117
Table 24: SAR of LTE band 5 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
88 of 117
5.4.3 SAR Result Of LTE Band 7
Test
position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conducted
power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_99 offset)
Left cheek
20
QPSK
20850/2510
1:1
0.129
-0.01
21.65
22
1.084
0.140
22.1
1.6
Left tilted
20
QPSK
20850/2510
1:1
0.0651
0.08
21.65
22
1.084
0.071
22.1
1.6
Right cheek
20
QPSK
20850/2510
1:1
0.195
0.04
21.65
22
1.084
0.211
22.1
1.6
Right tilted
20
QPSK
20850/2510
1:1
0.0678
0.06
21.65
22
1.084
0.073
22.1
1.6
Head Test data(50%RB)
Left cheek
20
QPSK
20850/2510
1:1
0.0979
0.07
20.54
21
1.112
0.109
22.1
1.6
Left tilted
20
QPSK
20850/2510
1:1
0.0507
0.08
20.54
21
1.112
0.056
22.1
1.6
Right cheek
20
QPSK
20850/2510
1:1
0.152
0.09
20.54
21
1.112
0.169
22.1
1.6
Right tilted
20
QPSK
20850/2510
1:1
0.0479
0.02
20.54
21
1.112
0.053
22.1
1.6
Body worn Test data(Separate 15mm 1RB_99 offset)
Front side
20
QPSK
20850/2510
1:1
0.0537
0.03
21.65
22
1.084
0.058
22.1
1.6
Back side
20
QPSK
20850/2510
1:1
0.091
0.09
21.65
22
1.084
0.099
22.1
1.6
Body worn Test data (Separate 15mm 50%RB)
Front side
20
QPSK
20850/2510
1:1
0.0383
0.02
20.54
21
1.112
0.043
22.1
1.6
Back side
20
QPSK
20850/2510
1:1
0.0585
0.09
20.54
21
1.112
0.065
22.1
1.6
Hotspot Test data(Separate 10mm 1RB_99 offset)
Front side
20
QPSK
20850/2510
1:1
0.116
0.06
21.65
22
1.084
0.126
22.1
1.6
Back side
20
QPSK
20850/2510
1:1
0.174
0.08
21.65
22
1.084
0.189
22.1
1.6
Left side
20
QPSK
20850/2510
1:1
0.00211
0.05
21.65
22
1.084
0.002
22.1
1.6
Right side
20
QPSK
20850/2510
1:1
0.0243
-0.04
21.65
22
1.084
0.026
22.1
1.6
Bottom side
20
QPSK
20850/2510
1:1
0.301
21.65
22
1.084
0.326
22.1
1.6
Hotspot Test data (Separate 10mm 50%RB)
Front side
20
QPSK
20850/2510
1:1
0.0829
0.01
20.54
21
1.112
0.092
22.1
1.6
Back side
20
QPSK
20850/2510
1:1
0.13
0.03
20.54
21
1.112
0.145
22.1
1.6
Left side
20
QPSK
20850/2510
1:1
0.00209
0.04
20.54
21
1.112
0.002
22.1
1.6
Right side
20
QPSK
20850/2510
1:1
0.00244
0.06
20.54
21
1.112
0.003
22.1
1.6
Bottom side
20
QPSK
20850/2510
1:1
0.226
20.54
21
1.112
0.251
22.1
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
89 of 117
Table 25: SAR of LTE band 7 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
90 of 117
5.4.4 SAR Result Of LTE Band 12
The original Report SZEM170400351906
Test
position
W.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conducte
d power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_49 offset)
Left touch
cheek
10
QPSK
23060/704
1:1
0.00899
0.06
21.12
21.5
1.091
0.010
22.1
1.6
Left tilted 15
degree
10
QPSK
23060/704
1:1
0.00701
0.08
21.12
21.5
1.091
0.008
22.1
1.6
Right touch
cheek
10
QPSK
23060/704
1:1
0.00919
0.09
21.12
21.5
1.091
0.010
22.1
1.6
Right tilted
15 degree
10
QPSK
23060/704
1:1
0.00661
0.12
21.12
21.5
1.091
0.007
22.1
1.6
Head Test data( 25RB_25 offset)
Left touch
cheek
10
QPSK
23060/704
1:1
0.014
0.05
20.19
20.5
1.074
0.015
22.1
1.6
Left tilted 15
degree
10
QPSK
23060/704
1:1
0.00524
0.17
20.19
20.5
1.074
0.006
22.1
1.6
Right touch
cheek
10
QPSK
23060/704
1:1
0.00693
0.06
20.19
20.5
1.074
0.007
22.1
1.6
Right tilted
15 degree
10
QPSK
23060/704
1:1
0.00499
0.04
20.19
20.5
1.074
0.005
22.1
1.6
Body worn Test data(Separate 15mm 1RB_49 offset)
Front side
10
QPSK
23060/704
1:1
0.0422
0.14
21.12
21.5
1.091
0.046
22.1
1.6
Back side
10
QPSK
23060/704
1:1
0.05
0.16
21.12
21.5
1.091
0.055
22.1
1.6
Body worn Test data (Separate 15mm 25RB_25 offset)
Front side
10
QPSK
23060/704
1:1
0.0338
0.09
20.19
20.5
1.074
0.036
22.1
1.6
Back side
10
QPSK
23060/704
1:1
0.0416
-0.02
20.19
20.5
1.074
0.045
22.1
1.6
Hotspot Test data(Separate 10mm 1RB_49 offset)
Front side
10
QPSK
23060/704
1:1
0.0667
-0.13
21.12
21.5
1.091
0.073
22.1
1.6
Back side
10
QPSK
23060/704
1:1
0.088
-0.03
21.12
21.5
1.091
0.096
22.1
1.6
Left side
10
QPSK
23060/704
1:1
0.0242
0.01
21.12
21.5
1.091
0.026
22.1
1.6
Right side
10
QPSK
23060/704
1:1
0.0144
-0.05
21.12
21.5
1.091
0.016
22.1
1.6
Bottom side
10
QPSK
23060/704
1:1
0.0579
-0.01
21.12
21.5
1.091
0.063
22.1
1.6
Hotspot Test data (Separate 10mm 25RB_25 offset)
Front side
10
QPSK
23060/704
1:1
0.0579
0.08
20.19
20.5
1.074
0.062
22.1
1.6
Back side
10
QPSK
23060/704
1:1
0.0676
0.07
20.19
20.5
1.074
0.073
22.1
1.6
Left side
10
QPSK
23060/704
1:1
0.0184
-0.12
20.19
20.5
1.074
0.020
22.1
1.6
Right side
10
QPSK
23060/704
1:1
0.0112
-0.11
20.19
20.5
1.074
0.012
22.1
1.6
Bottom side
10
QPSK
23060/704
1:1
0.0579
-0.09
20.19
20.5
1.074
0.062
22.1
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
91 of 117
Verify worst case of original Report SZEM170400351906
Test
position
W.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift(d
B)
Conducte
d power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
0.009
22.1
1.6
0.028
22.1
1.6
0.050
22.1
1.6
Head Test data at the worst case ( 25RB_25 offset)
Left touch
cheek
10
QPSK
23060/704
1:1
0.00803
0.03
21.12
21.5
1.091
Body worn Test data at the worst case (Separate 15mm 1RB_49 offset)
Back side
10
QPSK
23060/704
1:1
0.026
0.05
21.12
21.5
1.091
Hotspot Test data at the worst case (Separate 10mm 1RB_49 offset)
Back side
10
QPSK
23060/704
1:1
0.046
0.16
21.12
21.5
1.091
Table 26: SAR of LTE band 12 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
92 of 117
5.4.5 SAR Result Of LTE Band 13
Test
position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Condu
cted
power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_0 offset)
Left cheek
10
QPSK
23230/782
1:1
0.0115
0.06
20.8
21.5
1.175
0.014
22.1
1.6
Left tilted
10
QPSK
23230/782
1:1
0.00919
0.04
20.8
21.5
1.175
0.011
22.1
1.6
Right cheek
10
QPSK
23230/782
1:1
0.013
0.08
20.8
21.5
1.175
0.015
22.1
1.6
Right tilted
10
QPSK
23230/782
1:1
0.00994
0.07
20.8
21.5
1.175
0.012
22.1
1.6
Head Test data(50%RB_13 offset)
Left cheek
10
QPSK
23230/782
1:1
0.00893
0.09
19.93
20.5
1.140
0.010
22.1
1.6
Left tilted
10
QPSK
23230/782
1:1
0.00778
0.03
19.93
20.5
1.140
0.009
22.1
1.6
Right cheek
10
QPSK
23230/782
1:1
0.00913
-0.16
19.93
20.5
1.140
0.010
22.1
1.6
Right tilted
10
QPSK
23230/782
1:1
0.00812
-0.08
19.93
20.5
1.140
0.009
22.1
1.6
Body worn Test data(Separate 15mm 1RB_0 offset)
Front side
10
QPSK
23230/782
1:1
0.019
0.11
20.8
21.5
1.175
0.022
22.1
1.6
Back side
10
QPSK
23230/782
1:1
0.028
0.18
20.8
21.5
1.175
0.033
22.1
1.6
Body worn Test data (Separate 15mm 50%RB_13)
Front side
10
QPSK
23230/782
1:1
0.0159
0.09
19.93
20.5
1.140
0.018
22.1
1.6
Back side
10
QPSK
23230/782
1:1
0.0231
0.16
19.93
20.5
1.140
0.026
22.1
1.6
Hotspot Test data(Separate 10mm 1RB_0 offset)
Front side
10
QPSK
23230/782
1:1
0.0212
-0.08
20.8
21.5
1.175
0.025
22.1
1.6
Back side
10
QPSK
23230/782
1:1
0.035
0.02
20.8
21.5
1.175
0.041
22.1
1.6
Left side
10
QPSK
23230/782
1:1
0.0154
0.19
20.8
21.5
1.175
0.018
22.1
1.6
Right side
10
QPSK
23230/782
1:1
0.0184
0.02
20.8
21.5
1.175
0.022
22.1
1.6
Bottom side
10
QPSK
23230/782
1:1
0.0137
0.04
20.8
21.5
1.175
0.016
22.1
1.6
Hotspot Test data (Separate 10mm 50%RB_13)
Front side
10
QPSK
23230/782
1:1
0.0171
0.06
19.93
20.5
1.140
0.019
22.1
1.6
Back side
10
QPSK
23230/782
1:1
0.0283
0.05
19.93
20.5
1.140
0.032
22.1
1.6
Left side
10
QPSK
23230/782
1:1
0.0131
0.06
19.93
20.5
1.140
0.015
22.1
1.6
Right side
10
QPSK
23230/782
1:1
0.0159
0.07
19.93
20.5
1.140
0.018
22.1
1.6
Bottom side
10
QPSK
23230/782
1:1
0.0115
0.03
19.93
20.5
1.140
0.013
22.1
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
93 of 117
Table 27: SAR of LTE band 13 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
94 of 117
5.4.1 SAR Result Of LTE Band 17
Test
position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conducted
power
(dBm)
Tune up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_49 offset)
Left cheek
10
QPSK
23800/711
1:1
0.012
20.94
21.5
1.138
0.014
22.1
1.6
Left tilted
10
QPSK
23800/711
1:1
0.00783
0.02
20.94
21.5
1.138
0.009
22.1
1.6
Right cheek
10
QPSK
23800/711
1:1
0.0114
0.03
20.94
21.5
1.138
0.013
22.1
1.6
Right tilted
10
QPSK
23800/711
1:1
0.00465
0.05
20.94
21.5
1.138
0.005
22.1
1.6
Head Test data(50%RB_13 offset)
Left cheek
10
QPSK
23780/709
1:1
0.00759
19.92
20.5
1.143
0.009
22.1
1.6
Left tilted
10
QPSK
23780/709
1:1
0.00594
0.01
19.92
20.5
1.143
0.007
22.1
1.6
Right cheek
10
QPSK
23780/709
1:1
0.00768
0.02
19.92
20.5
1.143
0.009
22.1
1.6
Right tilted
10
QPSK
23780/709
1:1
0.00396
19.92
20.5
1.143
0.005
22.1
1.6
Body worn Test data(Separate 15mm 1RB_49 offset)
Front side
10
QPSK
23800/711
1:1
0.0155
0.04
20.94
21.5
1.138
0.018
22.1
1.6
Back side
10
QPSK
23800/711
1:1
0.024
0.03
20.94
21.5
1.138
0.027
22.1
1.6
Body worn Test data (Separate 15mm 50%RB_13)
Front side
10
QPSK
23780/709
1:1
0.0115
0.04
19.92
20.5
1.143
0.013
22.1
1.6
Back side
10
QPSK
23780/709
1:1
0.0181
0.08
19.92
20.5
1.143
0.021
22.1
1.6
Hotspot Test data(Separate 10mm 1RB_49 offset)
Front side
10
QPSK
23800/711
1:1
0.0191
0.07
20.94
21.5
1.138
0.022
22.1
1.6
Back side
10
QPSK
23800/711
1:1
0.038
0.01
20.94
21.5
1.138
0.043
22.1
1.6
Left side
10
QPSK
23800/711
1:1
0.0166
0.2
20.94
21.5
1.138
0.019
22.1
1.6
Right side
10
QPSK
23800/711
1:1
0.0142
0.12
20.94
21.5
1.138
0.016
22.1
1.6
Bottom side
10
QPSK
23800/711
1:1
0.00763
0.07
20.94
21.5
1.138
0.009
22.1
1.6
Hotspot Test data (Separate 10mm 50%RB_13)
Front side
10
QPSK
23780/709
1:1
0.0143
0.01
19.92
20.5
1.143
0.016
22.1
1.6
Back side
10
QPSK
23780/709
1:1
0.0289
-0.05
19.92
20.5
1.143
0.033
22.1
1.6
Left side
10
QPSK
23780/709
1:1
0.0128
0.01
19.92
20.5
1.143
0.015
22.1
1.6
Right side
10
QPSK
23780/709
1:1
0.0109
0.18
19.92
20.5
1.143
0.012
22.1
1.6
Bottom side
10
QPSK
23780/709
1:1
0.00547
0.03
19.92
20.5
1.143
0.006
22.1
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
95 of 117
Table 28: SAR of LTE band 17 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
96 of 117
5.4.2 SAR Result Of LTE Band 25
Test
position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conducted
power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_0 offset)
Left cheek
20
QPSK
26590/1905
1:1
0.05
0.01
21.45
22.5
1.274
0.064
22.3
1.6
Left tilted
20
QPSK
26590/1905
1:1
0.0234
0.08
21.45
22.5
1.274
0.030
22.3
1.6
Right cheek
20
QPSK
26590/1905
1:1
0.0446
0.07
21.45
22.5
1.274
0.057
22.3
1.6
Right tilted
20
QPSK
26590/1905
1:1
0.0193
0.04
21.45
22.5
1.274
0.025
22.3
1.6
Head Test data(50%RB_0 offset)
Left cheek
20
QPSK
26590/1905
1:1
0.0136
0.09
20.51
21.5
1.256
0.017
22.3
1.6
Left tilted
20
QPSK
26590/1905
1:1
0.0151
-0.02
20.51
21.5
1.256
0.019
22.3
1.6
Right cheek
20
QPSK
26590/1905
1:1
0.0302
0.04
20.51
21.5
1.256
0.038
22.3
1.6
Right tilted
20
QPSK
26590/1905
1:1
0.0119
0.08
20.51
21.5
1.256
0.015
22.3
1.6
Body worn Test data(Separate 15mm 1RB_0 offset)
Front side
20
QPSK
26590/1905
1:1
0.0629
-0.09
21.45
22.5
1.274
0.080
22.3
1.6
Back side
20
QPSK
26590/1905
1:1
0.193
0.01
21.45
22.5
1.274
0.246
22.3
1.6
Body worn Test data (Separate 15mm 50%RB)
Front side
20
QPSK
26590/1905
1:1
0.0439
0.04
20.51
21.5
1.256
0.055
22.3
1.6
Back side
20
QPSK
26590/1905
1:1
0.142
0.01
20.51
21.5
1.256
0.178
22.3
1.6
Hotspot Test data(Separate 10mm 1RB_0 offset)
Front side
20
QPSK
26590/1905
1:1
0.122
0.03
21.45
22.5
1.274
0.155
22.3
1.6
Back side
20
QPSK
26590/1905
1:1
0.36
0.07
21.45
22.5
1.274
0.458
22.3
1.6
Left side
20
QPSK
26590/1905
1:1
0.0927
0.03
21.45
22.5
1.274
0.118
22.3
1.6
Right side
20
QPSK
26590/1905
1:1
0.006
0.13
21.45
22.5
1.274
0.008
22.3
1.6
Bottom side
20
QPSK
26590/1905
1:1
0.733
-0.06
21.45
22.5
1.274
0.933
22.3
1.6
Bottom side
20
QPSK
26140/1860
1:1
0.682
-0.06
21.45
22.5
1.274
0.869
22.3
1.6
Bottom side
20
QPSK
26365/1882.5
1:1
0.757
0.01
21.45
22.5
1.274
0.964
22.3
1.6
Hotspot Test data (Separate 10mm 50%RB)
Front side
20
QPSK
26590/1905
1:1
0.089
0.03
20.51
21.5
1.256
0.112
22.3
1.6
Back side
20
QPSK
26590/1905
1:1
0.253
0.02
20.51
21.5
1.256
0.318
22.3
1.6
Left side
20
QPSK
26590/1905
1:1
0.0638
-0.08
20.51
21.5
1.256
0.080
22.3
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
97 of 117
Right side
20
QPSK
26590/1905
1:1
0.00864
0.09
20.51
21.5
1.256
0.011
22.3
1.6
Bottom side
20
QPSK
26590/1905
1:1
0.499
-0.06
20.51
21.5
1.256
0.627
22.3
1.6
1.274
0.709
22.3
1.6
Hotspot Test data (Separate 10mm 100%RB)
Front side
20
QPSK
26140/1860
1:1
0.557
-0.06
20.45
21.5
Table 29: SAR of LTE band 25 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
98 of 117
5.4.3 SAR Result Of LTE Band 38
Test
position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift(dB)
Conducted
power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_50 offset)
Left cheek
20
QPSK
38000/2595
1:1
0.0634
0.09
21.78
22.5
1.180
0.075
22.1
1.6
Left tilted
20
QPSK
38000/2595
1:1
0.0318
0.08
21.78
22.5
1.180
0.038
22.1
1.6
Right cheek
20
QPSK
38000/2595
1:1
0.081
0.01
21.78
22.5
1.180
0.096
22.1
1.6
Right tilted
20
QPSK
38000/2595
1:1
0.0214
0.1
21.78
22.5
1.180
0.025
22.1
1.6
Head Test data(50%RB)
Left cheek
20
QPSK
38000/2595
1:1
0.0538
0.08
20.67
21.5
1.211
0.065
22.1
1.6
Left tilted
20
QPSK
38000/2595
1:1
0.0252
0.07
20.67
21.5
1.211
0.031
22.1
1.6
Right cheek
20
QPSK
38000/2595
1:1
0.0644
20.67
21.5
1.211
0.078
22.1
1.6
Right tilted
20
QPSK
38000/2595
1:1
0.0165
0.06
20.67
21.5
1.211
0.020
22.1
1.6
Body worn Test data(Separate 15mm 1RB_50 offset)
Front side
20
QPSK
38000/2595
1:1
0.0204
21.78
22.5
1.180
0.024
22.1
1.6
Back side
20
QPSK
38000/2595
1:1
0.052
0.02
21.78
22.5
1.180
0.061
22.1
1.6
Body worn Test data (Separate 15mm 50%RB_0 offset)
Front side
20
QPSK
38000/2595
1:1
0.0132
-0.02
20.67
21.5
1.211
0.016
22.1
1.6
Back side
20
QPSK
38000/2595
1:1
0.0339
-0.07
20.67
21.5
1.211
0.041
22.1
1.6
Hotspot Test data(Separate 10mm 1RB_50 offset)
Front side
20
QPSK
38000/2595
1:1
0.0429
0.05
21.78
22.5
1.180
0.051
22.1
1.6
Back side
20
QPSK
38000/2595
1:1
0.0871
-0.03
21.78
22.5
1.180
0.103
22.1
1.6
Left side
20
QPSK
38000/2595
1:1
0.00726
0.06
21.78
22.5
1.180
0.009
22.1
1.6
Right side
20
QPSK
38000/2595
1:1
0.0152
0.06
21.78
22.5
1.180
0.018
22.1
1.6
Bottom side
20
QPSK
38000/2595
1:1
0.169
-0.14
21.78
22.5
1.180
0.199
22.1
1.6
Hotspot Test data (Separate 10mm 50%RB_0 offset)
Front side
20
QPSK
38000/2595
1:1
0.0275
-0.04
20.67
21.5
1.211
0.033
22.1
1.6
Back side
20
QPSK
38000/2595
1:1
0.0579
0.03
20.67
21.5
1.211
0.070
22.1
1.6
Left side
20
QPSK
38000/2595
1:1
0.00296
20.67
21.5
1.211
0.004
22.1
1.6
Right side
20
QPSK
38000/2595
1:1
0.00917
-0.14
20.67
21.5
1.211
0.011
22.1
1.6
Bottom side
20
QPSK
38000/2595
1:1
0.111
-0.14
20.67
21.5
1.211
0.134
22.1
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
99 of 117
Table 30: SAR of LTE band 38 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
100 of 117
5.4.4 SAR Result Of LTE Band 41
Test
position
BW.
Test
mode
Test
Ch./Freq.
Duty
Cycle
SAR
(W/kg)
1-g
Power
Drift
(dB)
Conducted
power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data(1RB_99 offset)
Left cheek
20
QPSK
40185/2549.5
1:1.58
0.0835
0.06
21.91
22.5
1.146
0.096
22.1
1.6
Left tilted
20
QPSK
40185/2549.5
1:1.58
0.0321
0.08
21.91
22.5
1.146
0.037
22.1
1.6
Right cheek
20
QPSK
40185/2549.5
1:1.58
0.125
0.02
21.91
22.5
1.146
0.143
22.1
1.6
Right tilted
20
QPSK
40185/2549.5
1:1.58
0.0438
0.08
21.91
22.5
1.146
0.050
22.1
1.6
Head Test data(50%RB)
Left cheek
20
QPSK
41055/2636.5
1:1.58
0.0203
20.75
21.5
1.189
0.024
22.1
1.6
Left tilted
20
QPSK
41055/2636.5
1:1.58
0.00556
0.01
20.75
21.5
1.189
0.007
22.1
1.6
Right cheek
20
QPSK
41055/2636.5
1:1.58
0.035
20.75
21.5
1.189
0.042
22.1
1.6
Right tilted
20
QPSK
41055/2636.5
1:1.58
0.00463
-0.09
20.75
21.5
1.189
0.006
22.1
1.6
Body worn Test data(Separate 15mm 1RB_99 offset)
Front side
20
QPSK
40185/2549.5
1:1.58
0.0134
21.91
22.5
1.146
0.015
22.1
1.6
Back side
20
QPSK
40185/2549.5
1:1.58
0.047
-0.01
21.91
22.5
1.146
0.054
22.1
1.6
Body worn Test data (Separate 15mm 50%RB)
Front side
20
QPSK
41055/2636.5
1:1.58
0.01
0.09
20.75
21.5
1.189
0.012
22.1
1.6
Back side
20
QPSK
41055/2636.5
1:1.58
0.0356
0.04
20.75
21.5
1.189
0.042
22.1
1.6
Hotspot Test data(Separate 10mm 1RB_99 offset)
Front side
20
QPSK
40185/2549.5
1:1.58
0.0509
0.07
21.91
22.5
1.146
0.058
22.1
1.6
Back side
20
QPSK
40185/2549.5
1:1.58
0.0872
0.06
21.91
22.5
1.146
0.100
22.1
1.6
Left side
20
QPSK
40185/2549.5
1:1.58
0.00373
0.04
21.91
22.5
1.146
0.004
22.1
1.6
Right side
20
QPSK
40185/2549.5
1:1.58
0.0116
0.03
21.91
22.5
1.146
0.013
22.1
1.6
Bottom side
20
QPSK
40185/2549.5
1:1.58
0.167
-0.09
21.91
22.5
1.146
0.191
22.1
1.6
Hotspot Test data (Separate 10mm 50%RB)
Front side
20
QPSK
41055/2636.5
1:1.58
0.0232
20.75
21.5
1.189
0.028
22.1
1.6
Back side
20
QPSK
41055/2636.5
1:1.58
0.0588
0.09
20.75
21.5
1.189
0.070
22.1
1.6
Left side
20
QPSK
41055/2636.5
1:1.58
0.00561
0.03
20.75
21.5
1.189
0.007
22.1
1.6
Right side
20
QPSK
41055/2636.5
1:1.58
0.00574
0.08
20.75
21.5
1.189
0.007
22.1
1.6
Bottom side
20
QPSK
41055/2636.5
1:1.58
0.121
-0.08
20.75
21.5
1.189
0.144
22.1
1.6
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
101 of 117
Table 31: SAR of LTE band 41 for Head and Body.
Note:
1) The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2) If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
102 of 117
5.4.5 SAR Result Of 2.4GHz WIFI
Test position
Test
mode
Test
Ch./Freq.
Duty
Cycle
Duty
Cycle
Scaled
factor
SAR
(W/kg)
1-g
Power
drift
(dB)
Conduct
ed power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data
Left touch
cheek
802.11b
6/2437
97.63%
1.024
0.0061
-0.01
15.01
16
1.256
0.008
22
1.6
Left tilted 15
degree
802.11b
6/2437
97.63%
1.024
0.00153
15.01
16
1.256
0.002
22
1.6
Right touch
cheek
802.11b
6/2437
97.63%
1.024
0.001
15.01
16
1.256
0.001
22
1.6
Right tilted 15
degree
802.11b
6/2437
97.63%
1.024
0.001
15.01
16
1.256
0.001
22
1.6
Body worn Test data(Separate 15mm)
Front side
802.11b
6/2437
97.63%
1.024
0.001
0.01
15.01
16
1.256
0.001
22
1.6
Back side
802.11b
6/2437
97.63%
1.024
0.001
0.03
15.01
16
1.256
0.001
22
1.6
Hotspot Test data (Separate 10mm)
Front side
802.11b
6/2437
97.63%
1.024
0.001
15.01
16
1.256
0.001
22
1.6
Back side
802.11b
6/2437
97.63%
1.024
0.0578
0.02
15.01
16
1.256
0.074
22
1.6
Right side
802.11b
6/2437
97.63%
1.024
0.001
0.05
15.01
16
1.256
0.001
22
1.6
Top side
802.11b
6/2437
97.63%
1.024
0.001
0.05
15.01
16
1.256
0.001
22
1.6
Table 32:
SAR of WIFI for Head and Body
Note:
1)
The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
2)
If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
3)
Each channel was tested at the lowest data rate.
4)
When the highest reported SAR for DSSS is adjusted by the ratio of OFDM to DSSS specified maximum output
power and the adjusted SAR is ≤ 1.2 W/kg, 802.11g/n OFDM SAR Test is not required.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
103 of 117
5.4.6 SAR Result Of 5GHz WIFI
The original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
Duty
Cycle
Scaled
factor
SAR
(W/kg)1g
Power
drift
(dB)
Cond
ucted
power
(dBm)
Tune
up
Limit
(dBm)
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
Head Test data U-NII-2A
Left touch
cheek
802.11a
52/5260
87.50%
1.143
0.239
0.05
13.221
13.5
1.066
0.291
22.2
1.6
Left tilted
15 degree
802.11a
52/5260
87.50%
1.143
0.159
0.02
13.221
13.5
1.066
0.194
22.2
1.6
Right touch
cheek
802.11a
52/5260
87.50%
1.143
0.142
0.07
13.221
13.5
1.066
0.173
22.2
1.6
Right tilted
15 degree
802.11a
52/5260
87.50%
1.143
0.0989
0.07
13.221
13.5
1.066
0.121
22.2
1.6
Head Test data U-NII-2C
Left touch
cheek
802.11a
116/5580
87.50%
1.143
0.427
0.09
13.265
13.5
1.056
0.515
22.2
1.6
Left tilted
15 degree
802.11a
116/5580
87.50%
1.143
0.279
0.01
13.265
13.5
1.056
0.337
22.2
1.6
Right touch
cheek
802.11a
116/5580
87.50%
1.143
0.21
-0.06
13.265
13.5
1.056
0.253
22.2
1.6
Right tilted
15 degree
802.11a
116/5580
87.50%
1.143
0.177
0.05
13.265
13.5
1.056
0.214
22.2
1.6
Body worn Test data U-NII-2A(Separate 15mm)
Front side
802.11a
52/5260
87.50%
1.143
0.034
-0.05
13.221
13.5
1.066
0.041
22.2
1.6
Back side
802.11a
52/5260
87.50%
1.143
0.0106
0.02
13.221
13.5
1.066
0.013
22.2
1.6
Body worn Test data U-NII-2C(Separate 15mm)
Front side
802.11a
116/5580
87.50%
1.143
0.024
-0.08
13.265
13.5
1.056
0.029
22.2
1.6
Back side
802.11a
116/5580
87.50%
1.143
0.0167
0.06
13.265
13.5
1.056
0.020
22.2
1.6
Hotspot Test data U-NII-1(Separate 10mm)
Front side
802.11a
36/5180
87.50%
1.143
0.086
-0.02
13.36
13.5
1.033
0.102
22.2
1.6
Back side
802.11a
36/5180
87.50%
1.143
0.061
-0.11
13.36
13.5
1.033
0.072
22.2
1.6
Right side
802.11a
36/5180
87.50%
1.143
0.0115
-0.07
13.36
13.5
1.033
0.014
22.2
1.6
Top side
802.11a
36/5180
87.50%
1.143
0.0388
-0.12
13.36
13.5
1.033
0.046
22.2
1.6
Scaled
factor
Scaled
SAR
(W/kg)
Liquid
Temp.
SAR
limit
(W/kg)
1.056
0.171
22.2
1.6
1.066
0.021
22.2
1.6
1.033
0.034
22.2
1.6
Verify worst case of original Report SZEM170400351906
Test
position
Test
mode
Test
Ch./Freq.
Duty
Cycle
Left touch
cheek
802.11a
116/5580
87.50%
Duty
Cond
Tune
SAR
Power
Cycle
ucted
up
(W/kg)
drift
Scaled
power
Limit
1-g
(dB)
factor
(dBm)
(dBm)
Head Test data U-NII-2C at the worst case
1.143
0.142
0.07
13.265
13.5
Body worn Test data U-NII-2A at the worst case (Separate 15mm)
Front side
802.11a
52/5260
87.50%
1.143
0.017
-0.02
13.221
13.5
Hotspot Test data U-NII-1 at the worst case (Separate 10mm)
Front side
802.11a
36/5180
87.50%
1.143
0.029
0.02
13.36
13.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
104 of 117
Table 33:
SAR of WIFI for Head and Body
Note:
5)
The maximum Scaled SAR value is marked in bold. Graph results refer to Appendix B
6)
If the reported (scaled) SAR measured at the middle channel or highest output power channel for each test
configuration is ≤ 0.8 W/kg then testing at the other channels is not required for such test configuration(s).
7)
Each channel was tested at the lowest data rate.
8)
When the highest reported SAR for DSSS is adjusted by the ratio of OFDM to DSSS specified maximum output
power and the adjusted SAR is ≤ 1.2 W/kg, 802.11g/n OFDM SAR Test is not required.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
105 of 117
5.5 Multiple Transmitter Evaluation
5.5.1 Simultaneous SAR SAR test evaluation
1)
Simultaneous Transmission
NO.
Simultaneous
Transmission
Configuration
Head
Body worn
Hotspot
GSM(Voice) + WiFi
Yes
Yes
No
GSM(Voice) + BT
Yes
Yes
No
WCDMA(Voice) + WiFi
Yes
Yes
No
WCDMA(Voice) + BT
Yes
Yes
No
GPRS / EDGE(Data) +
WiFi
No
No
Yes
GPRS / EDGE(Data) + BT
No
No
Yes
WCDMA(Data) + WiFi
No
No
Yes
WCDMA(Data) + BT
No
No
Yes
LTE(Data) + WiFi
Yes
Yes
Yes
10
LTE(Data) + BT
Yes
Yes
Yes
11
BT+WIFI
(They share the same
antenna and cannot
transmit at the same time
by design.)
No
No
No
5.5.2 Estimated SAR
When the standalone SAR test exclusion is applied to an antenna that transmits simultaneously with other
antennas, the standalone SAR must be estimated according to the following to determine simultaneous
transmission SAR test exclusion:
• (max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)/x] W/kg
for test separation distances ≤ 50 mm;
Where x = 7.5 for 1-g SAR, and x = 18.75 for 10-g SAR.
• 0.4 W/kg for 1-g SAR and 1.0 W/kg for 10-g SAR, when the test separation distances is > 50 mm.
Estimated SAR Result
Freq. Band
Frequency
(GHz)
Test Position
max.
power(dBm)
Bluetooth
2.48
Head
Body-worn
6.5
6.5
Test
Separation
(mm)
15
Estimated
1g SAR (W/kg)
0.188
0.063
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
106 of 117
2)
Simultaneous Transmission SAR Summation Scenario for head
②
③ MAX.5
①
④
MAX.2.4
Exposur
GHz
WWAN
MAX.WWA
GHz
MAX.BT
WLAN
Band
WLAN
SAR(W/k
position
SAR(W/k
SAR(W/kg) SAR(W/k
g)
g)
g)
Left
0.022
0.008
0.515
0.188
Touch
Left Tilt
GSM850
GSM190
WCDMA
Band II
WCDMA
Band IV
WCDMA
Band V
CDMA
BC0
CDMA
BC1
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Summe
d SAR
①+②
Summe
d SAR
①+③
Summe
d SAR
①+④
Cas
NO.
0.030
0.537
0.210
No
0.003
0.002
0.337
0.188
0.005
0.340
0.191
No
0.007
0.001
0.253
0.188
0.008
0.260
0.195
No
0.002
0.001
0.214
0.188
0.003
0.216
0.190
No
0.069
0.008
0.515
0.188
0.077
0.584
0.257
No
0.028
0.002
0.337
0.188
0.030
0.365
0.216
No
0.080
0.001
0.253
0.188
0.081
0.333
0.268
No
0.029
0.001
0.214
0.188
0.030
0.243
0.217
No
0.045
0.008
0.515
0.188
0.053
0.560
0.233
No
0.017
0.002
0.337
0.188
0.019
0.354
0.205
No
0.047
0.001
0.253
0.188
0.048
0.300
0.235
No
0.016
0.001
0.214
0.188
0.017
0.230
0.204
No
0.069
0.008
0.515
0.188
0.077
0.584
0.257
No
0.028
0.002
0.337
0.188
0.030
0.365
0.216
No
0.080
0.001
0.253
0.188
0.081
0.333
0.268
No
0.029
0.001
0.214
0.188
0.030
0.243
0.217
No
0.053
0.008
0.515
0.188
0.061
0.568
0.241
No
0.019
0.002
0.337
0.188
0.021
0.356
0.207
No
0.068
0.001
0.253
0.188
0.069
0.321
0.256
No
0.020
0.001
0.214
0.188
0.021
0.234
0.208
No
0.028
0.008
0.515
0.188
0.036
0.543
0.216
No
0.005
0.002
0.337
0.188
0.007
0.342
0.193
No
0.010
0.001
0.253
0.188
0.011
0.263
0.198
No
0.003
0.001
0.214
0.188
0.004
0.217
0.191
No
0.053
0.008
0.515
0.188
0.061
0.568
0.241
No
0.019
0.002
0.337
0.188
0.021
0.356
0.207
No
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
107 of 117
Right
Touch
Right
Tilt
Left
Touch
LTE
Band 2
LTE
Band 4
LTE
Band 5
LTE
Band 7
LTE
Band 12
LTE
Band 17
LTE
Band 25
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
0.068
0.001
0.253
0.188
0.069
0.321
0.256
No
0.020
0.001
0.214
0.188
0.021
0.234
0.208
No
0.078
0.008
0.515
0.188
0.086
0.593
0.266
No
0.025
0.002
0.337
0.188
0.027
0.362
0.213
No
0.086
0.001
0.253
0.188
0.087
0.339
0.274
No
0.030
0.001
0.214
0.188
0.031
0.244
0.218
No
0.111
0.008
0.515
0.188
0.119
0.626
0.299
No
0.039
0.002
0.337
0.188
0.041
0.376
0.227
No
0.087
0.001
0.253
0.188
0.088
0.340
0.275
No
0.047
0.001
0.214
0.188
0.048
0.261
0.235
No
0.028
0.008
0.515
0.188
0.036
0.543
0.216
No
0.022
0.002
0.337
0.188
0.024
0.359
0.210
No
0.037
0.001
0.253
0.188
0.038
0.290
0.225
No
0.019
0.001
0.214
0.188
0.020
0.233
0.207
No
0.140
0.008
0.515
0.188
0.148
0.655
0.328
No
0.071
0.002
0.337
0.188
0.073
0.408
0.259
No
0.211
0.001
0.253
0.188
0.212
0.464
0.399
No
0.073
0.001
0.214
0.188
0.074
0.287
0.261
No
0.015
0.008
0.515
0.188
0.023
0.530
0.203
No
0.008
0.002
0.337
0.188
0.010
0.345
0.196
No
0.010
0.001
0.253
0.188
0.011
0.263
0.198
No
0.007
0.001
0.214
0.188
0.008
0.221
0.195
No
0.014
0.008
0.515
0.188
0.022
0.529
0.202
No
0.009
0.002
0.337
0.188
0.011
0.346
0.197
No
0.013
0.001
0.253
0.188
0.014
0.266
0.201
No
0.005
0.001
0.214
0.188
0.006
0.219
0.193
No
0.064
0.008
0.515
0.188
0.072
0.579
0.252
No
0.030
0.002
0.337
0.188
0.032
0.367
0.218
No
0.057
0.001
0.253
0.188
0.058
0.310
0.245
No
0.025
0.001
0.214
0.188
0.026
0.239
0.213
No
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
108 of 117
LTE
Band 38
LTE
Band 41
Left
Touch
0.075
0.008
0.515
0.188
0.083
0.590
0.263
No
Left Tilt
0.038
0.002
0.337
0.188
0.040
0.375
0.226
No
0.096
0.001
0.253
0.188
0.097
0.349
0.284
No
0.025
0.001
0.214
0.188
0.026
0.239
0.213
No
0.096
0.008
0.515
0.188
0.104
0.611
0.284
No
0.037
0.002
0.337
0.188
0.039
0.374
0.225
No
0.143
0.001
0.253
0.188
0.144
0.396
0.331
No
0.050
0.001
0.214
0.188
0.051
0.264
0.238
No
Right
Touch
Right
Tilt
Left
Touch
Left Tilt
Right
Touch
Right
Tilt
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
109 of 117
3)
Simultaneous Transmission SAR Summation Scenario for body worn
③
①
Summ
④
MAX.5G
Exposu MAX.WW
②
ed
WWAN
Hz
MAX.BT
re
AN
MAX.2.4GHzWL
SAR①
Band
WLAN
SAR(W/k
position SAR(W/kg
AN SAR(W/kg)
SAR(W/k
g)
+②
g)
Summ
ed
SAR①
+③
Summ
ed
SAR①
+④
Cas
NO.
GSM85
Front
0.020
0.001
0.041
0.063
0.021
0.061
0.083
No
Back
0.050
0.001
0.021
0.063
0.051
0.071
0.113
No
GSM19
00
Front
0.116
0.001
0.041
0.063
0.117
0.157
0.179
No
Back
0.275
0.001
0.021
0.063
0.276
0.296
0.338
No
WCDM
A Band
II
Front
0.086
0.001
0.041
0.063
0.087
0.127
0.149
No
Back
0.165
0.001
0.021
0.063
0.166
0.186
0.228
No
WCDM
A Band
IV
Front
0.092
0.001
0.041
0.063
0.093
0.133
0.155
No
Back
0.137
0.001
0.021
0.063
0.138
0.158
0.200
No
WCDM
A Band
Front
0.023
0.001
0.041
0.063
0.024
0.064
0.086
No
Back
0.028
0.001
0.021
0.063
0.029
0.049
0.091
No
CDMA
BC 0
Front
0.036
0.001
0.041
0.063
0.037
0.077
0.099
No
Back
0.056
0.001
0.021
0.063
0.057
0.077
0.119
No
CDMA
BC 1
Front
0.086
0.001
0.041
0.063
0.087
0.127
0.149
No
Back
0.115
0.001
0.021
0.063
0.116
0.136
0.178
No
LTE
Band 2
Front
0.154
0.001
0.041
0.063
0.155
0.195
0.217
No
Back
0.199
0.001
0.021
0.063
0.200
0.220
0.262
No
LTE
Band 4
Front
0.164
0.001
0.041
0.063
0.165
0.205
0.227
No
Back
0.223
0.001
0.021
0.063
0.224
0.244
0.286
No
LTE
Band 5
Front
0.049
0.001
0.041
0.063
0.050
0.090
0.112
No
Back
0.060
0.001
0.021
0.063
0.061
0.081
0.123
No
LTE
Band 7
Front
0.058
0.001
0.041
0.063
0.059
0.099
0.121
No
Back
0.099
0.001
0.021
0.063
0.100
0.120
0.162
No
LTE
Band 12
Front
0.046
0.001
0.041
0.063
0.047
0.087
0.109
No
Back
0.055
0.001
0.021
0.063
0.056
0.076
0.118
No
LTE
Band 17
Front
0.018
0.001
0.041
0.063
0.019
0.059
0.081
No
Back
0.027
0.001
0.021
0.063
0.028
0.048
0.090
No
LTE
Band 13
Front
0.022
0.001
0.041
0.063
0.023
0.063
0.085
No
Back
0.033
0.001
0.021
0.063
0.034
0.054
0.096
No
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
110 of 117
LTE
Band 25
Front
0.080
0.001
0.041
0.063
0.081
0.121
0.143
No
Back
0.246
0.001
0.021
0.063
0.247
0.267
0.309
No
LTE
Band 38
Front
0.024
0.001
0.041
0.063
0.025
0.065
0.087
No
Back
0.061
0.001
0.021
0.063
0.062
0.082
0.124
No
LTE
Band 41
Front
0.015
0.001
0.041
0.063
0.016
0.056
0.078
No
Back
0.054
0.001
0.021
0.063
0.055
0.075
0.117
No
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
111 of 117
4)
Simultaneous Transmission SAR Summation Scenario for hotspot
② MAX.
③ MAX.
①
WWAN
2.4GHz
5GHz
Exposure position
MAX.WWAN
Band
WLAN
WLAN
SAR(W/kg)
SAR(W/kg) SAR(W/kg)
GSM850
GSM1900
WCDMA
Band II
WCDMA
Band IV
WCDMA
Band V
Summed
SAR①+
②
Summed
SAR①+
③
Case
NO.
Front
0.070
0.001
0.102
0.071
0.172
No
Back
0.096
0.074
0.072
0.170
0.168
No
Left
0.033
0.000
0.000
0.033
0.033
No
Right
0.017
0.001
0.014
0.018
0.031
No
Bottom
0.052
0.000
0.000
0.052
0.052
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.396
0.001
0.102
0.397
0.498
No
Back
0.580
0.074
0.072
0.654
0.652
No
Left
0.303
0.000
0.000
0.303
0.303
No
Right
0.063
0.001
0.014
0.064
0.077
No
Bottom
1.445
0.000
0.000
1.445
1.445
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.159
0.001
0.102
0.160
0.261
No
Back
0.213
0.074
0.072
0.287
0.285
No
Left
0.121
0.000
0.000
0.121
0.121
No
Right
0.026
0.001
0.014
0.027
0.040
No
Bottom
0.289
0.000
0.000
0.289
0.289
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.189
0.001
0.102
0.190
0.291
No
Back
0.262
0.074
0.072
0.336
0.334
No
Left
0.137
0.000
0.000
0.137
0.137
No
Right
0.022
0.001
0.014
0.023
0.036
No
Bottom
0.504
0.000
0.000
0.504
0.504
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.028
0.001
0.102
0.029
0.130
No
Back
0.039
0.074
0.072
0.113
0.111
No
Left
0.021
0.000
0.000
0.021
0.021
No
Right
0.032
0.001
0.014
0.033
0.046
No
Bottom
0.022
0.000
0.000
0.022
0.022
No
Top
0.000
0.001
0.046
0.001
0.046
No
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
112 of 117
LTE Band
LTE Band
LTE Band
LTE Band
LTE Band
12
LTE Band
17
Front
0.265
0.001
0.102
0.266
0.367
No
Back
0.344
0.074
0.072
0.418
0.416
No
Left
0.190
0.000
0.000
0.190
0.190
No
Right
0.044
0.001
0.014
0.045
0.058
No
Bottom
0.739
0.000
0.000
0.739
0.739
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.296
0.001
0.102
0.297
0.398
No
Back
0.425
0.074
0.072
0.499
0.497
No
Left
0.252
0.000
0.000
0.252
0.252
No
Right
0.038
0.001
0.014
0.039
0.052
No
Bottom
0.786
0.000
0.000
0.786
0.786
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.057
0.001
0.102
0.058
0.159
No
Back
0.075
0.074
0.072
0.149
0.147
No
Left
0.043
0.000
0.000
0.043
0.043
No
Right
0.062
0.001
0.014
0.063
0.076
No
Bottom
0.042
0.000
0.000
0.042
0.042
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.126
0.001
0.102
0.127
0.228
No
Back
0.189
0.074
0.072
0.263
0.261
No
Left
0.002
0.000
0.000
0.002
0.002
No
Right
0.026
0.001
0.014
0.027
0.040
No
Bottom
0.326
0.000
0.000
0.326
0.326
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.073
0.001
0.102
0.074
0.175
No
Back
0.096
0.074
0.072
0.170
0.168
No
Left
0.026
0.000
0.000
0.026
0.026
No
Right
0.016
0.001
0.014
0.017
0.030
No
Bottom
0.063
0.000
0.000
0.063
0.063
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.022
0.001
0.102
0.023
0.124
No
Back
0.043
0.074
0.072
0.117
0.115
No
Left
0.019
0.000
0.000
0.019
0.019
No
Right
0.016
0.001
0.014
0.017
0.030
No
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
113 of 117
LTE Band
13
LTE Band
25
LTE Band
38
LTE Band
41
Bottom
0.009
0.000
0.000
0.009
0.009
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.025
0.001
0.102
0.026
0.127
No
Back
0.041
0.074
0.072
0.115
0.113
No
Left
0.018
0.000
0.000
0.018
0.018
No
Right
0.022
0.001
0.014
0.023
0.036
No
Bottom
0.016
0.000
0.000
0.016
0.016
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.155
0.001
0.102
0.156
0.257
No
Back
0.458
0.074
0.072
0.532
0.530
No
Left
0.118
0.000
0.000
0.118
0.118
No
Right
0.008
0.001
0.014
0.009
0.022
No
Bottom
0.964
0.000
0.000
0.964
0.964
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.051
0.001
0.102
0.052
0.153
No
Back
0.103
0.074
0.072
0.177
0.175
No
Left
0.009
0.000
0.000
0.009
0.009
No
Right
0.018
0.001
0.014
0.019
0.032
No
Bottom
0.199
0.000
0.000
0.199
0.199
No
Top
0.000
0.001
0.046
0.001
0.046
No
Front
0.058
0.001
0.102
0.059
0.160
No
Back
0.100
0.074
0.072
0.174
0.172
No
Left
0.004
0.000
0.000
0.004
0.004
No
Right
0.013
0.001
0.014
0.014
0.027
No
Bottom
0.191
0.000
0.000
0.191
0.191
No
Top
0.000
0.001
0.046
0.001
0.046
No
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
114 of 117
Equipment list
Test Platform
Location
Description
Software Reference
SPEAG DASY5 Professional
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch
SAR Test System (Frequency range 300MHz-6GHz)
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Hardware Reference
Manufacturer
Model
Serial Number
Calibration
Date
Due date of
calibration
Robot
Staubli
RX90L
F03/5V32A1/A01
NCR
Twin Phantom
SPEAG
SAM 1
TP-1283
NCR
NCR
NCR
Twin Phantom
SPEAG
SAM 2
1913
NCR
NCR
DAE
SPEAG
DAE3
896
2017-09-27
2018-09-26
DAE
SPEAG
DAE4
1374
2017-02-23
2018-02-22
E-Field Probe
SPEAG
EX3DV4
3789
2017-01-13
2018-01-12
E-Field Probe
SPEAG
EX3DV4
3962
2016-12-19
2017-12-18
Validation Kits
SPEAG
D750V3
1160
2016-06-22
2019-06-21
Validation Kits
SPEAG
D835V2
4d105
2016-12-08
2019-12-07
Validation Kits
SPEAG
D1750V2
1149
2016-06-23
2019-06-22
Validation Kits
SPEAG
D1900V2
5d142
2016-06-23
2019-06-22
Validation Kits
SPEAG
D2450V2
733
2016-12-07
2019-12-06
Validation Kits
SPEAG
D2600V2
1125
2016-06-22
2019-06-21
Validation Kits
SPEAG
D5GHzV2
1165
2016-12-13
2019-12-12
Universal Radio
Communication Tester
R&S
CMW500
152271
2017-03-06
2018-03-05
Agilent Network Analyzer
Agilent
E5071C
MY46523590
2017-03-06
2018-03-05
Dielectric Probe Kit
Agilent
85070E
US01440210
NCR
NCR
RF Bi-Directional Coupler
Agilent
86205-60001
MY31400031
NCR
NCR
Signal Generator
Agilent
N5171B
MY53050736
2017-03-06
2018-03-05
Preamplifier
Mini-Circuits
ZHL-42W
15542
NCR
NCR
Power Meter
Agilent
E4416A
GB41292095
2017-03-06
2018-03-05
Power Sensor
Agilent
8481H
MY41091234
2017-03-05
2018-03-04
Power Sensor
R&S
NRP-Z92
100025
2017-03-06
2018-03-05
Attenuator
SHX
TS2-3dB
30704
NCR
NCR
Coaxial low pass filter
Mini-Circuits
VLF-2500(+)
NA
NCR
NCR
Coaxial low pass filter
Microlab Fxr
LA-F13
NA
NCR
NCR
50 Ω coaxial load
Mini-Circuits
KARN-50+
00850
NCR
NCR
DC POWER SUPPLY
SAKO
SK1730SL5A
NA
NCR
NCR
Speed reading
thermometer
MingGao
T809
NA
2017-03-08
2018-03-07
Humidity and Temperature
Indicator
KIMTOKA
KIMTOKA
NA
2017-03-08
2018-03-07
Equipment
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
115 of 117
Measurement Uncertainty
Measurements and results are all in compliance with the standards listed in this report. All measurements and
results are recorded and maintained at the laboratory performing the tests and measurement uncertainties are
taken into account when comparing measurements to pass/ fail criteria. The Expanded uncertainty (95%
CONFIDENCE INTERVAL) is 21.60%.
b1
e=
f(d,k)
i=
C*g/e
Uncertainty Component
Section
in P1528
Tol
(%)
Prob .
Dist.
Div.
Ci
(1g)
1g
ui
(%)
Vi
(Veff)
Probe calibration
E.2.1
6.3
6.30
∞
Axial isotropy
E.2.2
0.5
0.20
∞
hemispherical isotropy
E.2.2
2.6
Cp
1.06
∞
Boundary effect
E.2.3
1.0
0.58
∞
Linearity
E.2.4
0.6
0.35
∞
System detection limit
E.2.5
0.25
0.14
∞
Readout electronics
E.2.6
0.3
0.30
∞
Response time
E.2.7
0.00
∞
Integration time
E.2.8
2.6
1.50
∞
RF ambient Condition –Noise
E.6.1
1.73
∞
RF ambient Condition reflections
E.6.1
1.73
∞
Probe positioning- mechanical
tolerance
E.6.2
1.5
0.87
∞
Probe positioning- with respect
to phantom
E.6.3
2.9
1.67
∞
Max. SAR evaluation
E.5.2
0.58
∞
Test sample positioning
E.4.2
3.7
3.70
Device holder uncertainty
E.4.1
3.6
3.60
∞
Output power variation –SAR
drift measurement
6.6.2
2.89
∞
Phantom uncertainty
(shape and thickness
tolerances)
E.3.1
2.31
∞
Liquid conductivity
- deviation from target values
E.3.2
0.64
1.85
∞
Liquid conductivity
- measurement uncertainty
E.3.2
5.78
0.64
3.68
Liquid permittivity
- deviation from target values
E.3.3
0.6
1.73
∞
Cp 1/2
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
116 of 117
Liquid permittivity
- measurement uncertainty
E.3.3
0.62
0.6
0.372
430
Combined standard uncertainty
RSS
10.80
Expanded uncertainty
(95% CONFIDENCE
INTERVAL)
K=2
21.60
Table 34: Measurement Uncertainty
Of
Calibration certificate
Please see the Appendix C
Photographs
Please see the Appendix D
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Page:
117 of 117
Appendix A: Detailed System Validation Results
Appendix B: Detailed Test Results
Appendix C: Calibration certificate
Appendix D: Photographs
---END---
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171001110307
Appendix A
Detailed System Validation Results
1. System Performance Check for Head
System Performance Check 750 MHz Head
System Performance Check 835 MHz Head
System Performance Check 1750 MHz Head
System Performance Check 1900 MHz Head
System Performance Check 2450 MHz Head
System Performance Check 2600 MHz Head
System Performance Check 5GHz Head
2. System Performance Check for Body
System Performance Check 750 MHz Body
System Performance Check 835 MHz Body
System Performance Check 1750 MHz Body
System Performance Check 1900 MHz Body
System Performance Check 2450 MHz Body
System Performance Check 2600 MHz Body
System Performance Check 5GHz Body
Date: 2017/12/11
Test Laboratory: SGS-SAR Lab
System Performance Check 750 MHz Head
DUT: D750V3; Type: D750V3; Serial: 1160
Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1
Medium: HSL750;Medium parameters used: f = 750 MHz; σ = 0.873 S/m; εr = 43.068; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(8.89, 8.89, 8.89); Calibrated: 2017/1/13;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: SAM1; Type: SAM; Serial: 1912
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm,
dy=15mm
Maximum value of SAR (measured) = 2.17 W/kg
Body/d=15mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 49.88 V/m; Power Drift = -0.08 dB
Peak SAR (extrapolated) = 3.06 W/kg
SAR(1 g) = 2.03 W/kg; SAR(10 g) = 1.34 W/kg
Maximum value of SAR (measured) = 2.19 W/kg
0 dB = 2.19 W/kg = 3.40 dBW/kg
Date: 2017/12/11
Test Laboratory: SGS-SAR Lab
System Performance Check 835 MHz Head
DUT: D835V2; Type: D835V2; Serial: 4d105
Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1
Medium: HSL835;Medium parameters used: f = 835 MHz; σ = 0.886 S/m; εr = 40.798; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(8.61, 8.61, 8.61); Calibrated: 2017/1/13;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: SAM1; Type: SAM; Serial: 1912
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm,
dy=15mm
Maximum value of SAR (measured) = 3.31 W/kg
Body/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 57.09 V/m; Power Drift = -0.19 dB
Peak SAR (extrapolated) = 3.76 W/kg
SAR(1 g) = 2.59 W/kg; SAR(10 g) = 1.72 W/kg
Maximum value of SAR (measured) = 3.25 W/kg
0 dB = 3.25 W/kg = 5.12 dBW/kg
Date: 2017-12-06
Test Laboratory: SGS-SAR Lab
System Performance Check 1750 MHz Head
DUT: D1750V2; Type: D1750V2; Serial: 1149
Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1
Medium: HSL1750;Medium parameters used: f = 1750 MHz; σ = 1.318 S/m; εr = 40.413; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3962; ConvF(8.48, 8.48, 8.48); Calibrated: 2016-12-19;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn896; Calibrated: 2017-09-27
Phantom: SAM 1; Type: SAM V4.0; Serial: TP-1283
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm,
dy=15mm
Maximum value of SAR (measured) = 9.75 W/kg
Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 77.63 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 15.9 W/kg
SAR(1 g) = 8.75 W/kg; SAR(10 g) = 4.69 W/kg
Maximum value of SAR (measured) = 9.79 W/kg
0 dB = 9.79 W/kg = 9.91 dBW/kg
Date: 2017-12-09
Test Laboratory: SGS-SAR Lab
System Performance Check 1900 MHz Head
DUT: D1900V2; Type: D1900V2; Serial: 5d028
Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: HSL1900;Medium parameters used: f = 1900 MHz; σ = 1.362 S/m; εr = 40.029; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3962; ConvF(8.27, 8.27, 8.27); Calibrated: 2016-12-19;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn896; Calibrated: 2017-09-27
Phantom: SAM 1; Type: SAM V4.0; Serial: TP-1283
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=250mW/Area Scan (7x11x1): Measurement grid: dx=15mm,
dy=15mm
Maximum value of SAR (measured) = 11.3 W/kg
Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 84.22 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 19.2 W/kg
SAR(1 g) = 10.1 W/kg; SAR(10 g) = 5.23 W/kg
Maximum value of SAR (measured) = 11.3 W/kg
0 dB = 11.3 W/kg = 10.53 dBW/kg
Date: 2017/12/12
Test Laboratory: SGS-SAR Lab
System Performance Check 2450MHz Head
DUT: D2450V2; Type: D2450V2; Serial: 733
Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: HSL2450;Medium parameters used: f = 2450 MHz; σ = 1.825 S/m; εr = 39.903; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(6.85, 6.85, 6.85); Calibrated: 2017/1/13;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: SAM2; Type: SAM; Serial: 1913
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=250mW/Area Scan (9x14x1): Measurement grid: dx=12mm,
dy=12mm
Maximum value of SAR (measured) = 14.0 W/kg
Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 86.79 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 28.7 W/kg
SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.23 W/kg
Maximum value of SAR (measured) = 15.4 W/kg
0 dB = 15.4 W/kg = 11.88 dBW/kg
Date: 2017/12/10
Test Laboratory: SGS-SAR Lab
System Performance Check 2600MHz Head
DUT: Dipole D2600V2; Type: D2600V2; Serial: 1125
Communication System: UID 0, CW (0); Frequency: 2600 MHz;Duty Cycle: 1:1
Medium: HSL2600;Medium parameters used: f = 2600 MHz; σ = 2 S/m; εr = 39.385; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(6.7, 6.7, 6.7); Calibrated: 2017/1/13;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: SAM2; Type: SAM; Serial: 1913
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=250mW/Area Scan (10x13x1): Measurement grid: dx=10mm,
dy=10mm
Maximum value of SAR (measured) = 15.1 W/kg
Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 90.00 V/m; Power Drift = -0.00 dB
Peak SAR (extrapolated) = 33.2 W/kg
SAR(1 g) = 14.7 W/kg; SAR(10 g) = 6.48 W/kg
Maximum value of SAR (measured) = 16.8 W/kg
0 dB = 16.8 W/kg = 12.25 dBW/kg
Date: 2017/12/28
Test Laboratory: SGS-SAR Lab
System Performance Check D5.25GHz Head
DUT: D5GHzV2; Type: D5GHzV2; Serial: 1165
Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1
Medium: HSL5G;Medium parameters used: f = 5250 MHz; σ = 4.721 S/m; εr = 36.578; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(5, 5, 5); Calibrated: 2017/1/13;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -2.0, 23.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: SAM2; Type: SAM; Serial: 1913
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=100mW, f=5250 MHz/Area Scan (10x10x1): Measurement grid:
dx=10mm, dy=10mm
Maximum value of SAR (measured) = 12.2 W/kg
Body/d=10mm, Pin=100mW, f=5250 MHz/Zoom Scan (4x4x1.4mm, graded),
dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 66.58 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 29.3 W/kg
SAR(1 g) = 7.1 W/kg; SAR(10 g) = 2.02 W/kg
Maximum value of SAR (measured) = 16.7 W/kg
0 dB = 16.7 W/kg = 12.23 dBW/kg
Date: 2017/12/28
Test Laboratory: SGS-SAR Lab
System Performance Check D5.6GHz Head
DUT: D5GHzV2; Type: D5GHzV2; Serial: 1165
Communication System: UID 0, CW (0); Frequency: 5600 MHz;Duty Cycle: 1:1
Medium: HSL5000;Medium parameters used: f = 5600 MHz; σ = 5.107 S/m; εr = 35.626; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(4.48, 4.48, 4.48); Calibrated: 2017/1/13;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -2.0, 23.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: SAM2; Type: SAM; Serial: 1913
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=100mW, f=5600 MHz/Area Scan (10x10x1): Measurement grid:
dx=10mm, dy=10mm
Maximum value of SAR (measured) = 16.4 W/kg
Body/d=10mm, Pin=100mW, f=5600 MHz/Zoom Scan (4x4x1.4mm, graded),
dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 63.24 V/m; Power Drift = -0.11 dB
Peak SAR (extrapolated) = 34.7 W/kg
SAR(1 g) = 7.67 W/kg; SAR(10 g) = 2.16 W/kg
Maximum value of SAR (measured) = 19.2 W/kg
0 dB = 19.2 W/kg = 12.83 dBW/kg
Date: 2017/12/12
Test Laboratory: SGS-SAR Lab
System Performance Check 750 MHz Body
DUT: D750V3; Type: D750V3; Serial: 1160
Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1
Medium: MSL750;Medium parameters used: f = 750 MHz; σ = 0.955 S/m; εr = 55.223; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(9.13, 9.13, 9.13); Calibrated: 2017/1/13;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: SAM1; Type: SAM; Serial: 1912
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm,
dy=15mm
Maximum value of SAR (measured) = 2.74 W/kg
Body/d=15mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 47.81 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 3.22 W/kg
SAR(1 g) = 2.19 W/kg; SAR(10 g) = 1.46 W/kg
Maximum value of SAR (measured) = 2.74 W/kg
0 dB = 2.74 W/kg = 4.38 dBW/kg
Date: 2017/12/12
Test Laboratory: SGS-SAR Lab
System Performance Check 835 MHz Body
DUT: D835V2; Type: D835V2; Serial: 4d105
Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1
Medium: MSL835;Medium parameters used: f = 835 MHz; σ = 1.011 S/m; εr = 54.871; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(8.8, 8.8, 8.8); Calibrated: 2017/1/13;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: SAM1; Type: SAM; Serial: 1912
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm,
dy=15mm
Maximum value of SAR (measured) = 3.19 W/kg
Body/d=15mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 50.76 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 3.73 W/kg
SAR(1 g) = 2.54 W/kg; SAR(10 g) = 1.68 W/kg
Maximum value of SAR (measured) = 3.20 W/kg
0 dB = 3.20 W/kg = 5.05 dBW/kg
Date: 2017-12-06
Test Laboratory: SGS-SAR Lab
System Performance Check 1750 MHz Body
DUT: D1750V2; Type: D1750V2; Serial: 1149
Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1
Medium: MSL1750;Medium parameters used: f = 1750 MHz; σ = 1.431 S/m; εr = 51.208; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3962; ConvF(8.41, 8.41, 8.41); Calibrated: 2016-12-19;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn896; Calibrated: 2017-09-27
Phantom: SAM2; Type: SAM; Serial: 1913
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm,
dy=15mm
Maximum value of SAR (measured) = 12.6 W/kg
Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 79.31 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 16.4 W/kg
SAR(1 g) = 9.11 W/kg; SAR(10 g) = 4.84 W/kg
Maximum value of SAR (measured) = 13.0 W/kg
0 dB = 13.0 W/kg = 11.14 dBW/kg
Date: 2017-12-09
Test Laboratory: SGS-SAR Lab
System Performance Check 1900 MHz Body
DUT: D1900V2; Type: D1900V2; Serial: 5d028
Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: MSL1900;Medium parameters used: f = 1900 MHz; σ = 1.523 S/m; εr = 53.897; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3962; ConvF(7.82, 7.82, 7.82); Calibrated: 2016-12-19;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn896; Calibrated: 2017-09-27
Phantom: SAM2; Type: SAM; Serial: 1913
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=250mW/Area Scan (7x11x1): Measurement grid: dx=15mm,
dy=15mm
Maximum value of SAR (measured) = 11.6 W/kg
Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 60.09 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 18.5 W/kg
SAR(1 g) = 10.4 W/kg; SAR(10 g) = 5.48 W/kg
Maximum value of SAR (measured) = 14.6 W/kg
0 dB = 14.6 W/kg = 11.64 dBW/kg
Date: 2017-12-12
Test Laboratory: SGS-SAR Lab
System Performance Check 2450MHz Body
DUT: D2450V2; Type: D2450V2; Serial: 733
Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: MSL2450;Medium parameters used: f = 2450 MHz; σ = 1.927 S/m; εr = 50.753; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3962; ConvF(7.46, 7.46, 7.46); Calibrated: 2016-12-19;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn896; Calibrated: 2017-09-27
Phantom: ELI V5.0; Type: ELI; Serial: 1128
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=250mW/Area Scan (10x14x1): Measurement grid: dx=12mm,
dy=12mm
Maximum value of SAR (measured) = 13.7 W/kg
Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 80.36 V/m; Power Drift = -0.00 dB
Peak SAR (extrapolated) = 25.6 W/kg
SAR(1 g) = 12.4 W/kg; SAR(10 g) = 5.72 W/kg
Maximum value of SAR (measured) = 14.2 W/kg
0 dB = 14.2 W/kg = 11.52 dBW/kg
Date: 2017-12-10
Test Laboratory: SGS-SAR Lab
System Performance Check 2600MHz Body
DUT: D2600V2; Type: D2600V2; Serial: 1125
Communication System: UID 0, CW (0); Frequency: 2600 MHz;Duty Cycle: 1:1
Medium: MSL2600;Medium parameters used: f = 2600 MHz; σ = 2.115 S/m; εr = 50.306; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3962; ConvF(7.26, 7.26, 7.26); Calibrated: 2016-12-19;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = -2.0, 31.0
Electronics: DAE4 Sn896; Calibrated: 2017-09-27
Phantom: ELI V5.0; Type: ELI; Serial: 1128
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=250mW/Area Scan (10x13x1): Measurement grid: dx=10mm,
dy=10mm
Maximum value of SAR (measured) = 18.3 W/kg
Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 80.78 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 27.3 W/kg
SAR(1 g) = 13.3 W/kg; SAR(10 g) = 5.95 W/kg
Maximum value of SAR (measured) = 20.6 W/kg
0 dB = 20.6 W/kg = 13.14 dBW/kg
Date: 2017/12/28
Test Laboratory: SGS-SAR Lab
System Performance Check D5.25GHz Body
DUT: D5GHzV2; Type: D5GHzV2; Serial: 1165
Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1
Medium: MSL5000;Medium parameters used: f = 5250 MHz; σ = 5.382 S/m; εr = 48.368; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(4.64, 4.64, 4.64); Calibrated: 2017/1/13;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -2.0, 23.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: ELI v4.0; Type: ELI; Serial: 1123
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=100mW, f=5250 MHz/Area Scan (10x10x1): Measurement grid:
dx=10mm, dy=10mm
Maximum value of SAR (measured) = 20.9 W/kg
Body/d=10mm, Pin=100mW, f=5250 MHz/Zoom Scan (4x4x1.4mm, graded),
dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 53.25 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 34.2 W/kg
SAR(1 g) = 7.81 W/kg; SAR(10 g) = 2.17 W/kg
Maximum value of SAR (measured) = 19.1 W/kg
0 dB = 19.1 W/kg = 12.81 dBW/kg
Date: 2017/12/28
Test Laboratory: SGS-SAR Lab
System Performance Check D5.6GHz Body
DUT: D5GHzV2; Type: D5GHzV2; Serial: 1165
Communication System: UID 0, CW (0); Frequency: 5600 MHz;Duty Cycle: 1:1
Medium: MSL5000;Medium parameters used: f = 5600 MHz; σ = 5.803 S/m; εr = 47.435; ρ = 1000
kg/m3
Phantom section: Flat Section
DASY 5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3789; ConvF(3.86, 3.86, 3.86); Calibrated: 2017/1/13;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -2.0, 23.0
Electronics: DAE4 Sn1374; Calibrated: 2017/8/31
Phantom: ELI v4.0; Type: ELI; Serial: 1123
DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Body/d=10mm, Pin=100mW, f=5600 MHz/Area Scan (10x10x1): Measurement grid:
dx=10mm, dy=10mm
Maximum value of SAR (measured) = 23.0 W/kg
Body/d=10mm, Pin=100mW, f=5600 MHz/Zoom Scan (4x4x1.4mm, graded),
dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 54.37 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 39.3 W/kg
SAR(1 g) = 8.41 W/kg; SAR(10 g) = 2.33 W/kg
Maximum value of SAR (measured) = 21.1 W/kg
0 dB = 21.1 W/kg = 13.24 dBW/kg
Download: F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Mirror Download [FCC.gov]F10104216 Saygus smartphone V-Squared RF Exposure Info Test Report_SAR-1 Saygus
Document ID3740225
Application IDKG6PqmOD0wrju2FNnRMWIQ==
Document DescriptionTest Report_SAR-1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize279.2kB (3490028 bits)
Date Submitted2018-02-05 00:00:00
Date Available2018-02-07 00:00:00
Creation Date2018-02-03 13:34:00
Producing SoftwareAdobe Acrobat 11.0.0
Document Lastmod2018-02-03 13:34:00
Document TitleTest Report_SAR-1
Document CreatorAdobe Acrobat 11.0.0
Document Author: sar_lab

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : sar_lab
Create Date                     : 2018:02:03 13:34:00+08:00
Modify Date                     : 2018:02:03 13:34:00+08:00
Title                           : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:02:03 13:34+08:00
Creator Tool                    : Adobe Acrobat 11.0.0
Format                          : application/pdf
Creator                         : sar_lab
Document ID                     : uuid:fae1aeff-87a0-4385-a384-ed98f8296250
Instance ID                     : uuid:199adbd8-d314-4f76-b45e-106bf293afeb
Producer                        : Adobe Acrobat 11.0.0
Page Count                      : 134