S02C915 Ultra-Low Power Long Range RF Module User Manual V-chip Microsystems, Inc.
V-chip Microsystems, Inc. Ultra-Low Power Long Range RF Module
Sample: www.comemagic.en.alibaba.com Web: www.digirf.com V-CHIP VT-S02C-915 RELEASE MAY-2017 VER1.0.3 VT-S02C-915 Ultra-Low Power Long Range RF Module Industry 1 Advantage Ultra-Low Power － Voltage Range: 1.8~3.8V － Standby: 0.7uA － Active-Mode RX: 5.4mA － Active-Mode TX: 13.4mA @+10dBm Long Range － 2000m @+10dBm, 2.4kbps － 3000m @+15dBm, 2.4kbps TI-RTOS and Contiki System Support External Watchdog Small Size, Compatible with VT-SA02x The picture is for reference, please in kind prevail 2 Descriptions VT-S02C-915 RF Module is base on the SoC chip CC1310 of Texas Instruments design. It integrated with a high performance RF core, an ARM®Cortex®-M3 controller. It operates at 904~920MHz, max output power up to 10dBm. Thanks to its ultra low power feature, the module is extremely suitable for the battery power systems. And thanks to its small size, the module can be easily installed in existing systems without any external circuits. 3 Device Information Part Number VT-S02C- 915 Frequency MHz Power dBm Range km Voltage Temperature ℃ 904-920 10 1.8~3.8 -40~85 Copyright @ 2017~2018, V-chip Microsystems,Inc. Discreption DATASHEET V-CHIP VT-S02C-915 RELEASE MAY-2017 VER1.0.3 www.digirf.com 4 Features Radio Peripherals － Operate Frequency 904~920MHz － 19 GPIO － Modulation: MSK、FSK、GFSK、OOK、ASK、 － 4 Timers (8x16-Bit or 4x32-Bit)， 2-GFSK、4GFSK、CPM Support PWM Each － Sensitivity: -124dBm @Long-Range Mode － 12-Bit ADC, 8-Channel － Data Rate from 0.625Kbps to 4Mbps － UART、SSI、I2C、I2S － Hardware support FEC, Data Whitening, CRC － Real-Time Clock (RTC) － Support 126.96.36.199g － AES-128 Security Module － Support LBT and CCA － Support 8 Capacitive Sensing Buttons － Support Digital RSSI － Integrated Temperature Sensor Microcontroller Electric Specification － Powerful ARM® Cortex®-M3 － Voltage Range from 1.8 to 3.8V － Up to 48MHz Clock Speed － Standby: 0.7uA － 128KB Flash － Active-Mode RX: 5.4mA － 20KB SRAM － Active-Mode TX: 13.4mA @ +15dBm － 2-Pin cJTAG and JTAG Debugging － Support OTA － SMD + DIP Package － Antenna Interface: SMD + DIP + IPEX Connector 5 Applications 915MHz ISM and SRD Systems Industrial Monitoring and Control Energy Harvesting Application Home and Building Automation Electronic Shelf Label Heat Cost Allocators Long-Range Sensor Application Wireless Alarm and Security Systems SmartGrid and Automatic Meter Reading Wireless Sensor Networks Wireless Healthcare Application Active RFID DATASHEET Copyright @ 2017~2018, V-chip Microsystems,Inc. V-CHIP VT-S02C-915 www.digirf.com RELEASE MAY-2017 VER1.0.3 6 Terminal Configuration and Functions 6.1 Pin Diagram VT-S02C (27.0 × 20.0 mm) Pin out，1.27mm Pitch 6.2 Signal Description Pin Type NO. Description Name VCC Power Voltage Range from 2.4V to 3.8V DC GND Power Ground RST Digital Input Reset, active low. No internal pull-up TMS Digital I/O JTAG TMSC, High drive capability TCK Digital I/O JTAG TCKC DIO16/TDO Digital I/O GPIO, JTAG TDO, High drive capability DIO17/TDI Digital I/O GPIO, JTAG TDI, High drive capability DIO25 Digital/ Analog I/O GPIO, Sensor Controller, Analog DIO26 Digital/ Analog I/O GPIO, Sensor Controller, Analog 10 DIO27 Digital/ Analog I/O GPIO, Sensor Controller, Analog 11 DIO28 Digital/ Analog I/O GPIO, Sensor Controller, Analog 12 DIO29 Digital/ Analog I/O GPIO, Sensor Controller, Analog 13 DIO14 Digital I/O GPIO 14 DIO13 Digital I/O GPIO Copyright @ 2017~2018, V-chip Microsystems,Inc. DATASHEET 3 V-CHIP VT-S02C RELEASE MAY-2017 VER1.0.3 www.digirf.com 15 DIO11 Digital I/O GPIO 16 DIO10 Digital I/O GPIO 17 DIO9 Digital I/O GPIO 18 DIO8 Digital I/O GPIO 19 DIO7 Digital I/O GPIO, Sensor Controller, High drive capability 20 DIO6 Digital I/O GPIO, Sensor Controller, High drive capability 21 DIO5 Digital I/O GPIO, Sensor Controller, High drive capability 22 DIO4 Digital I/O GPIO, Sensor Controller 23 DIO3 Digital I/O GPIO, Sensor Controller 24 DIO2 Digital I/O GPIO, Sensor Controller 25 GND Power Ground 26 ANT Analog Antenna, 50ohm 27 GND Power Ground 6.3 External Watchdog Connection 6.3.1 Pin Connection Pin Type Name Description Function DIO19 WAKE Input DIO18 DONE Output Connect to Watchdog WAKE pin, issue a periodic WAKE pulse. Connect to Watchdog DONE pin, must issue a DONE signal to at least 20ms before the rising edge of the next WAKE pulse. Note: Watchdog may not include in some type of the module. The Watchdog is programmed to 1 minute periodic, please contact with us for other periodic. Make sure to deal with WAKE pulse during debugging. DATASHEET Copyright @ 2017~2018, V-chip Microsystems,Inc. V-CHIP VT-S02C-915 www.digirf.com RELEASE MAY-2017 VER1.0.3 6.3.2 Watchdog Pulse Diagram 7 Specifications 7.1 Electric Spec MIN MAX UNIT VCC, Operate Voltage 1.8 3.8 Voltage on any digital pin -0.3 VCC+0.3 Voltage on ADC input -0.3 VCC 10 dBm MIN MAX UNIT Operate Temperature -40 85 ℃ Operate Humidity 10% 90% rh Storage Temperature -40 150 ℃ MIN MAX UNIT Operate Frequency 904 920 MHz Output Power -10 +10 dBm -124 dBm 625 4M bps Input RF level 7.2 Environment Spec 7.3 Radio Spec Condition: Ta=25℃，VCC=3.3V. 915MHz Sensitivity @Long-Range Mode, 2.4Kbps Data Rate Copyright @ 2017~2018, V-chip Microsystems,Inc. DATASHEET 5 V-CHIP VT-S02C RELEASE MAY-2017 VER1.0.3 www.digirf.com TX Current @ +10dBm 24 mA RX Current @ MCU Ative mA 8 Tools and Development Source － We provide CC13xx Evaluation Board，fully compact with TI CC13xx LaunchPad. － CC1310 sheet of TI: http://www.ti.com/product/CC1310 － TI wiki：http://processors.wiki.ti.com/index.php?title=Category:Sub-1GHz － CC1310 LaunchPad of TI: http://www.ti.com/tool/launchxl-cc1310 DATASHEET Copyright @ 2017~2018, V-chip Microsystems,Inc. V-CHIP www.digirf.com VT-S02C-915 RELEASE MAY-2017 VER1.0.3 9 Size Data Copyright @ 2017~2018, V-chip Microsystems,Inc. DATASHEET 7 V-CHIP VT-S02C RELEASE MAY-2017 VER1.0.3 www.digirf.com IMPORTANT NOTICE V-chip Microsystems,Inc. (short of V-chip)reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to V-chip’s terms and conditions of sale supplied at the time of order acknowledgment. V-chip warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with V-chip’s standard warranty. Testing and other quality control techniques are used to the extent V-chip deems necessary to support this warranty. V-chip does not warrant or represent that any license, either express or implied, is granted under any V-chip patent right, copyright, mask work right, or other V-chip intellectual property right relating to any combination, machine, or process in which V-chip products or services are used. Information published by V-chip regarding third-party products or services does not constitute a license from V-chip to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from V-chip under the patents or other intellectual property of V-chip. Reproduction of V-chip information in V-chip data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. V-chip is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of V-chip products or services with statements different from or beyond the parameters stated by V-chip for that product or service voids all express and any implied warranties for the associated V-chip product or service and is an unfair and deceptive business practice. V-chip is not responsible or liable for any such statements. V-Chip Microsystems, Inc Add：6 floor, Longtang Building, Nan Shan Cloud Valley Innovation Industrial Park, No.1183, Liuxian Road, Nanshan District, Shenzhen city Tel：86-755-88844812 Fax：86-755-22643680 E-mail：firstname.lastname@example.org ZIP：518055 Web：www.digiRF.com DATASHEET Copyright @ 2017~2018, V-chip Microsystems,Inc. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Modular Approal & Installation: The Ultra-Low Power Long Range RF Module is designed to comply with the FCC rules, except for power stabilization which shall be provided by the host. Therefore, any host system using this module, requires additional testing and equipment authorization. This radio module must not be installed to co-locate and operating simultaneously with other radios in host system, if so, then additional testing and equipment authorization may be required to operating simultaneously with other radio. Applicable antenna: Helical antenna,FPC antenna;Applicable antenna Gain:-4dBi to +4dBi. The host system shall have a label indicating: Contains FCC ID: 2APCO-S02C915
Source Exif Data [exif.tools]:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : toby855 Create Date : 2018:04:02 12:40:39+08:00 Modify Date : 2018:04:11 10:22:06+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:04:11 10:22:06+08:00 Producer : Acrobat Distiller 11.0 (Windows) Format : application/pdf Title : Microsoft Word - 1-说明书（User Manual）.docx Creator : toby855 Document ID : uuid:9abb3d7a-0f85-4984-9da3-2ea61e47024a Instance ID : uuid:29b59d24-a92d-4925-b50a-c84b6a690df4 Page Count : 9