H47 REMOTE CONTROL AIRCRAFT SERIES User Manual Users Manual GUANGDONG JIANJIAN INTELLIGENT TECHNOLOGY CO.,LTD

GUANGDONG JIANJIAN INTELLIGENT TECHNOLOGY CO.,LTD REMOTE CONTROL AIRCRAFT SERIES

Page 1 of H47 REMOTE CONTROL AIRCRAFT SERIES User Manual Users Manual GUANGDONG JIANJIAN INTELLIGENT TECHNOLOGY CO.,LTD

With 2.4G frequency band for long remote control
distance, ELFIE+ allows multiple flights at the
same time without any interference. User can fly it
with gravity sensing remote control, or control it to
fly, roll, hover and take photos/videos with APP and
WIFI connection on smart phone.
ELFIE PLUS (ELFIE+) x1
(Battery included)
PRE-FLIGHT PREPARATIONS
2.Unfold Crankshafts
1.Flight Environment
Unfolding Sequence:
①Unfold the rear crankshafts.
②Unfold the front crankshafts.(Near the camera)
Fold the crankshafts in reverse order.
4.Battery Installation of Drone
Remote control x1
Camera
Indoor: Spacious spaces away from barriers,
crowds or pets are preferred.
A. Press the button on battery box, push
the battery backward to the end and take
it out upward.
Backup propellers x4
Outdoor: Sunny, windless and breezy weathers
are preferred.
3. Propellers Installation
B.Take out the battery upward.
ELFIE PLUS (ELFIE+)
Protective bag x1
Please keep the drone in sight during the flight
and keep it away from barriers, high-tension
cables,trees and people.
6 Propeller
2 Lower casing
7 Battery
3 Up cover of arms
8 Motor
4 Down cover of arms(A)
UPGRADED FOLDABLE DRONE
WITH GRAVITY SENSING CONTROL
5 Down cover of arms(B)
Phillips screwdriver x1
10 Camera
Please check the number of accessories carefully
(as shown above).Please provide proof of
purchase and contact the store for replacement if
any missing parts.
Operating Precautions For Gravity
Sensing Remote Control
①Hold the controller in horizontal position without
any tilt before starting your flight.
Front
B corresponds to B
Do not fly in extreme environment, such as
hotness, coldness, strong wind or heavy rain.
*Please read this manual carefully before operation and keep it
properly for future reference.
A corresponds to A
Notes:
9 Gear
Release screws with
screwdriver counterclockwise and pull out the
propellers, install the
propellers correspondingly
and screw on clockwise.
Notes:
When installing or dismantling the propeller,please
do not exert force on the propeller to avoid distortion.
LED lights off when charging, LED lights on when
finish charging. Charging time is about 70 minutes.
3.Gravity Sensor Control
4.Hover
1.One-Key Start
Tilt the controller to control the drone flying forward/
backward or left/right sideward.
When you release the left joystick (throttle) after the
ascent/descent action, the drone will hover at a
certain height.
Left
Sideward
Battery Recycling
Notes:
KNOW YOUR REMOTE CONTROL
APP
①Turn on the power of the drone; put the drone on
plain ground; check whether the indicator lights of
remote control and LED lights of drone flash.
The battery box is located at the controller bottom,
open the battery cover by sliding upper cover
forward and lower cover backward hard.
①
②Push the joystick (throttle )to the top and
then pull back to the bottom. After the sounds of
Di-Di, the flash of indicator lights of remote control
and LED lights of drone will turn to constant lights,
which means the pairing completes.
Please use the charger from original factory
to ensure your safe usage.
Do not charge dilatant or outworn battery.
Do not over charge battery. Please unplug
the charger once fully charged.
Do not charge the battery next to
inflammables, such as carpet, timber floor or
wood furniture or on the surface of
electro-conductive objects. Please always
keep an eye on the battery when charging.
Do not charge battery which not cool down
yet.
The charging temperature should be
between 0℃to 40℃.
Do not dispose the battery as daily rubbish.
Please familiarize yourself with the local
garbage disposal method and dispose it
according to the special requirement.
FLY WITH REMOTE CONTROL
Before flying, hold the controller in horizontal
position.
①Press “Calibration” button for routine calibration.
②Press “One-key Start” button, push the joystick
forward lightly to fly the drone.
C.Connect USB charging cable with the
charging interface of the lithium battery.
2.Pairing Remote Control With Drone
①Opening Battery Cover
②Loading Batteries
4 Calibration
(long press for
2 seconds)
5 Emergency stop
Open the cover of battery compartment, insert two
AAA batteries (not included)
3 Headless mode
6 Light control
Notes:
7 Power switch
1. Ensure the polarity symbols on the batteries
match the symbols inside the battery
compartment.
2. Do not mix new and old batteries.
3. Do not mix different types of batteries.
3.Basic Flight
1.Remote Control Frequency Pairing
1.Wifi Connection
Calibrate the drone when it cannot vertically
ascend. Press “Calibration”button and the
indicator light of drone starts flashing. Then
release all the buttons till the flash of the drone’s
indicator light turns to constant light. Thus the
calibration completes.Ensure the whole process
of calibration is operated under horizontal and
steady circumstances.
FLY WITH APP
①Use your phone to scan the QR code, download
and install the control software: ‘JJRC’. Android,
Android(Google Play) and iOS are all supported.
3.Calibration of Remote Control
1 High/Low speed
2 Joystick
(one press to start/
press again to land)
2.APP Interface Instruction
②
AAA batteries*2
1.5V“AAA”
User manual x1
ELFIE PLUS (ELFIE+)
Different from ordinary remote control, this is a
gravity sensing controller, which enables you to
hold it in one hand and tilt it for drone direction
control. For novice user who tries gravity controller
for the first time, please read the user manual and
operate it carefully.
1.Battery Installation of Controller
UPGRADED FOLDABLE DRONE
WITH GRAVITY SENSING CONTROL
*Please read this manual carefully before operation and keep it
properly for future reference.
1 Upper casing
There is a certain risk when using lithium
battery. It may cause fire, body injury or
property loss. Users must be aware of the
risks and take full responsibility of using
battery improperly.
If battery leakage occurs, please avoid
contacting your eyes and skin with
electrolyte. Once it happens, please wash
your eyes with clean water and seek medical
care immediately.
Please remove the plug immediately if you
sense any peculiar smell, noise or smog.
Battery Charging
AGE 14+
KNOW THE REMOTE CONTROL
USB charger x1
Battery Instructions
10
1.5V“AAA”
Accessories
Know Your ELFIE+
AGE 14+
Click ①“ON”, then click ② “Altitude Hold” for remote
control frequency pairing.
Right Joystick
Use the left joystick to control the flight altitude and
turn left/right, and the right joystick to control the
forward, backward, left and right side flight
directions.
Forward
Forward
Left Joystick
180°
②
②Keep the drone at least 3 meters away from you
for the first time you try gravity sensing controller.
Joystick (one
press to start/
press again to
land)
Calibration
(long press
for 2 seconds)
3m
③When you hold the controller upwards and it
faces to you right ahead, the drone will fly
backward towards your position. Please operate
it carefully in this state to avoid being hit by
drone and/or other accidents.
Android
Android
(Google Play)
①
2.Joystick
Use the joystick to control the flight altitude and
left /right turn.
Ascend
Right
Sideward
Backward
iOS
JJRC
②Turn on the drone and the lights will flash;turn on
your mobile phone to connect WIFI (UAV-***),
as shown in figure.
Descend
④In case of emergency, press “Stop” button
immediately.
Setting
Wi-Fi
Turn Left
Return
Photo
Video
Document
(album/video)
Speed Control:
30%/60%/100%
Altitude Hold
Gravity Sensor
Control
Show/Hide
Steering Wheel
More Settings
360°Flips&Rolls
2.One-Key Start
One-key Start
One-key
Landing
Click "One-key Start" to activate the motor and
propellers.
Camera Reverse
3D Display
Headless Mode
One-key Reset
Emergency Stop
Flight Planning
Backward
Descent
Left Joystick (throttle)
Right Side
Flight
Right Joystick(rudder)
Turn Left
Left/Right Rotation
Fine-tuning
Turn Right
Left/Right Side Fly
Fine-tuning
10
11
12
13
14
15
Hover
4.Take Selfies
6.Fine-Tunning
7.One-Key Reset
8.Flight Planning
FAQ
When you release the left joystick (throttle) after
the ascent/descent action, the drone will hover at a
certain height.
In the Altitude Hold mode, you can control the
drone to turn the camera back to itself, then click
the camera button on the screen to take selfies.
If the drone rotates or yaws, click the fine-tunning to
When deviating from course due to crash, please
the reverse direction of yawing till the yaw is
control the drone back to a horizontal plane and
adjusted and the drone stays oriented at the control.
click "One-key reset" for gyro calibration and
When the drone takes off, click "flight planning"
button to activate flight path mode. Draw a path in
the blank, and the drone would perform the flight
path at the altitude as you pilot and fly on its own.
PROBLEMS
take-off again.
Left Rotation Right Rotation
Fine-tuning
Fine-tuning
5.Gravity Sensor Control
Fail to
ascend
Click to enter Gravity Sensor Control, put your right
hand thumb on the right joystick, and move the
phone towards any direction for remote control.
9.Beauty Mode
Backward
Fine-tuning
Left Side Fly
Fine-tuning
Right Side Fly
Fine-tuning
Notes:
Attention: When the drone is within 30cm from
the ground, it will be affected by the blade vortex
made by itself and become unstable. This is
"ground effect".The lighter the drone is,the
greater the effect will be.
The built-in beauty mode on camera can
automatically beautify images to deliver improved
and stunning images with outstanding
qualities.
Before
20
21
CAUSES
22
23
16
SOLUTIONS
Not connect with
the drone battery.
Connect the drone
battery in right way.
Too strong wind
force.
Do not fly in windy
days. The
performance and the
control of the drone
will be affected by
the strong winds.
The rotation
speed of main
blades is too slow.
Push up the throttle
joystick.
The battery of the
drone is not fully
charged.
Please full charge
the drone.
Control
failure
Landing
too soon
Pull down the
The throttle stick is throttle stick
pulled down too fast. slowly to perform
a smooth landing.
Out of
control
Ensure that the
Beyond the effective flying distance is
controlling distance. within 30 meters.
Dear Customer,
Thank you for choosing JJRC product. Please
visit JJRC official website for more FAQ and
information if there is any problem of using our
product.
-Product Operation: Please visit JJRC College
for tutorial video or user manual.
-Product Features: Please refer to product page
description or product brochure.
-After-sale Service: Please refer to conditions
and terms of after-sale service.
The final interpretation right belongs to all JJRC.
Should you have any further questions, please
visit JJRC Online Feedback and leave your
message.
Thank you again for your support!
JIANJIAN TECHNOLOGY CO.,LTD.
www.jjrc-tech.com
After
24
Forward/
Backward
Fine-tuning
JJRC TECHNICAL SUPPORT
Forward
Fine-tuning
Left Side
Flight
Turn Right
UAV-***
Emergency
stop
Ascent
25
26
17
18
19
Download: H47 REMOTE CONTROL AIRCRAFT SERIES User Manual Users Manual GUANGDONG JIANJIAN INTELLIGENT TECHNOLOGY CO.,LTD
Mirror Download [FCC.gov]H47 REMOTE CONTROL AIRCRAFT SERIES User Manual Users Manual GUANGDONG JIANJIAN INTELLIGENT TECHNOLOGY CO.,LTD
Document ID4003102
Application IDvoAk/2dmzZ9hrC4dPUW2iw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize213.07kB (2663317 bits)
Date Submitted2018-09-12 00:00:00
Date Available2018-09-12 00:00:00
Creation Date2017-12-06 16:34:10
Producing SoftwareAdobe PDF library 10.01
Document Lastmod2018-09-04 01:17:20
Document TitleUsers Manual
Document CreatorAdobe Illustrator CS6 (Windows)

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2017:12:06 16:34:10+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2018:09:04 01:17:20+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Title                           : 健健H47英文说明书
Metadata Date                   : 2018:09:04 01:17:20+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 156
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 22412 bytes, use -b option to extract)
Instance ID                     : uuid:571a39da-fa2e-44c4-98b2-35eb66995e3c
Document ID                     : xmp.did:E7270CE25FDAE711853ED2FBD93B8E7C
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:e1a524e2-8deb-4e93-bd09-b31ae81179fe
Derived From Document ID        : xmp.did:BB0CF6CC7F7DE711A543F70DC97CF908
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:352A8869646BE611852BC6F6ECDE0231, xmp.iid:E7270CE25FDAE711853ED2FBD93B8E7C
History When                    : 2016:08:26 16:40:55+08:00, 2017:12:06 16:33:59+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\Administrator\Desktop\FPV 123.jpg, pingguo.jpg, guge.jpg, anzhuo .jpg
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 710.494444
Max Page Size H                 : 434.269444
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, FZY3JW--GB1-0, SimHei, AdobeSongStd-Light
Font Family                     : Arial, Arial MT, 方正准圆简体, 黑体, Adobe 宋体 Std
Font Face                       : Regular, Bold, Regular, Regular, L
Font Type                       : Open Type, Open Type, TrueType, Open Type, Open Type
Font Version                    : Version 5.06, 001.001, 4.00, Version 5.01, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False
Font File Name                  : arial.ttf, Arial-BoldMT_2.otf, 方正准圆简体.ttf, simhei.ttf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组, 灰色, 明亮
Swatch Group Type               : 0, 1, 1
Swatch Colorant Swatch Name     : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, AutoCAD Color, AutoCAD Color 2, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999998, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000004, 10.000002, 0.000000, 25.000000, 39.999996, 50.000000, 55.000000, 25.000000, 30.000002, 35.000004, 39.999996, 39.999996, 50.000000, 92.971703, 37.241199, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000004
Swatch Colorant Magenta         : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000004, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 10.000002, 14.999998, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000004, 39.999996, 50.000000, 60.000004, 65.000000, 70.000000, 70.000000, 87.972801, 76.470604, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000000, 90.000000
Swatch Colorant Yellow          : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000004, 50.000000, 19.999998, 39.999996, 50.000000, 60.000004, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 89.019600, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003099
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999996, 0.000000, 10.000002, 25.000000, 35.000004, 50.000000, 70.000000, 79.998497, 0.000000, 100.000000, 89.999405, 79.998795, 69.999702, 59.999104, 50.000000, 39.999401, 29.998802, 19.999701, 9.999103, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099
Swatch Colorant Tint            : 100.000000, 100.000000
Producer                        : Adobe PDF library 10.01
Page Count                      : 1