FCC ID 2AQTF-CAX00WB

2AQTFCAX00WB, 2AQTF CAX00WB, 2AQTF-CAX00WB, 2AQTF-CAXOOWB, 2AOTF-CAX00WB, 2A0TF-CAX00WB

Rayonnant Technology Co., LTD. Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card -CAX00WB

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AQTF-CAX00WB is 2AQTF. The remaining characters of the FCC ID, -CAX00WB, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card

App # Purpose Date Unique ID
1 Change in Identification 2018-09-07 qUvBUAaygB2J/jDG0jU9zw==
2 Change in Identification 2018-09-07 6sElkAoQrPBcZr5sY8zIGA==
3 Change in Identification 2018-09-07 I2fPDT4b4qv/XGCx61seeA==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
Frequency RangePower OutputRule PartsGrant Notes App #
2.402-2.48 GHz Bluetooth2 mW15CCC 1.1
2.402-2.48 GHz Bluetooth18 mW15CCC 2.1
2.402-2.48 GHz Bluetooth13 mW15CCC 2.2
2.412-2.462 GHz 2.4 GHz WiFi246 mW15CCC 1.2
2.422-2.452 GHz 2.4 GHz WiFi189 mW15CCC 1.3
5.19-5.23 GHz 5 GHz WiFi35 mW15ECC 3.2
5.21-5.21 GHz 5 GHz WiFi14 mW15ECC 3.3
5.26-5.32 GHz 5 GHz WiFi DFS55 mW15ECC 3.4
5.27-5.31 GHz 5 GHz WiFi46 mW15ECC 3.5
5.29-5.29 GHz 5 GHz WiFi17 mW15ECC 3.6
5.5-5.72 GHz 5 GHz WiFi53 mW15ECC 3.7
5.51-5.71 GHz45 mW15ECC 3.8
5.53-5.69 GHz 5 GHz WiFi41 mW15ECC 3.9
5.745-5.825 GHz 5 GHz WiFi57 mW15ECC 3.1
5.755-5.795 GHz 5 GHz WiFi35 mW15ECC 3.11
5.775-5.775 GHz 5 GHz WiFi21 mW15ECC 3.12

Exhibits

Available Exhibits

App #Document Type Submitted
Available
3 Label and locationID Label/Location Info
Adobe Acrobat PDF (102 kB)
2018-09-07
2018-09-07
3 Letter POACover Letter(s)
Adobe Acrobat PDF (244 kB)
2018-09-07
2018-09-07
3 Change ID Request LetterCover Letter(s)
Adobe Acrobat PDF (190 kB)
2018-09-07
2018-09-07
3 Change ID Authorization letterCover Letter(s)
Adobe Acrobat PDF (27 kB)
2018-09-07
2018-09-07
3 STC LetterCover Letter(s)
Adobe Acrobat PDF (218 kB)
2018-09-07
2018-09-07
3 Authorization LetterCover Letter(s)
Adobe Acrobat PDF (113 kB)
2018-09-07
2018-09-07
1 Label and locationID Label/Location Info
Adobe Acrobat PDF (102 kB)
2018-09-07
2018-09-07
1 Letter POACover Letter(s)
Adobe Acrobat PDF (244 kB)
2018-09-07
2018-09-07
1 Change ID Request LetterCover Letter(s)
Adobe Acrobat PDF (190 kB)
2018-09-07
2018-09-07
1 Change ID Authorization letterCover Letter(s)
Adobe Acrobat PDF (27 kB)
2018-09-07
2018-09-07
1 STC LetterCover Letter(s)
Adobe Acrobat PDF (218 kB)
2018-09-07
2018-09-07
1 Authorization LetterCover Letter(s)
Adobe Acrobat PDF (113 kB)
2018-09-07
2018-09-07
2 Label and locationID Label/Location Info
Adobe Acrobat PDF (102 kB)
2018-09-07
2018-09-07
2 Letter POACover Letter(s)
Adobe Acrobat PDF (244 kB)
2018-09-07
2018-09-07
2 Change ID Request LetterCover Letter(s)
Adobe Acrobat PDF (190 kB)
2018-09-07
2018-09-07
2 Change ID Authorization letterCover Letter(s)
Adobe Acrobat PDF (27 kB)
2018-09-07
2018-09-07
2 STC LetterCover Letter(s)
Adobe Acrobat PDF (218 kB)
2018-09-07
2018-09-07
2 Authorization LetterCover Letter(s)
Adobe Acrobat PDF (113 kB)
2018-09-07
2018-09-07

APP # 3 (2018-09-07)

App # Document Type Submitted
Available
3 Label and location ID Label/Location Info
Adobe Acrobat PDF (102 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
3 Letter POA Cover Letter(s)
Adobe Acrobat PDF (244 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
3 Change ID Request Letter Cover Letter(s)
Adobe Acrobat PDF (190 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
3 Change ID Authorization letter Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
3 STC Letter Cover Letter(s)
Adobe Acrobat PDF (218 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
3 Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (113 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00

APP # 1 (2018-09-07)

App # Document Type Submitted
Available
1 Label and location ID Label/Location Info
Adobe Acrobat PDF (102 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
1 Letter POA Cover Letter(s)
Adobe Acrobat PDF (244 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
1 Change ID Request Letter Cover Letter(s)
Adobe Acrobat PDF (190 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
1 Change ID Authorization letter Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
1 STC Letter Cover Letter(s)
Adobe Acrobat PDF (218 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
1 Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (113 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00

APP # 2 (2018-09-07)

App # Document Type Submitted
Available
2 Label and location ID Label/Location Info
Adobe Acrobat PDF (102 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
2 Letter POA Cover Letter(s)
Adobe Acrobat PDF (244 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
2 Change ID Request Letter Cover Letter(s)
Adobe Acrobat PDF (190 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
2 Change ID Authorization letter Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
2 STC Letter Cover Letter(s)
Adobe Acrobat PDF (218 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
2 Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (113 kB)
2018-09-07 00:00:00
2018-09-07 00:00:00
2 External photos External Photos
Adobe Acrobat PDF (766 kB)
2018-09-07 00:00:00
2019-03-07 00:00:00

APP # 3 (2018-09-07)

App # Document Type Submitted
Available
3 External photos External Photos
Adobe Acrobat PDF (766 kB)
2018-09-07 00:00:00
2019-03-07 00:00:00

APP # 1 (2018-09-07)

App # Document Type Submitted
Available
1 External photos External Photos
Adobe Acrobat PDF (766 kB)
2018-09-07 00:00:00
2019-03-07 00:00:00

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Rayonnant Technology Co., LTD.
FCC Registration Number (FRN): 0027747435
Alphanumeric FCC ID: 2AQTFCAX00WB
Unique Application Identifier: qUvBUAaygB2J/jDG0jU9zw==
Line one: No.581, Ruiguang Rd., Neihu District,
City: Taipei City
State: N/A
Country: Taiwan
Zip Code: 11492

TCB Information
TCB Application Email Address: tcb@siemic.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AQTF
Product Code: -CAX00WB

Person at the applicant's address to receive grant or for contact
Name: Sam Wang
Title: Deputy general manager
Telephone Number: 287978588 Extension: 11842
Fax Number: +886-3-4398155
Email: Sam_Wang@Rayon-Nant.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/07/2019
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: GKR-CAX00WB Grant Date: 07/12/2017

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
First Name:   Ken
Last Name:   Liu
Telephone Number: +886-(0)3-318-3232 Extension: 1609
Fax Number:  +886-(0)3-211-5834
E-mail:  ken.liu@tw.bureauveritas.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
CIIPC to add host COMPAL Rugged Tablet model CAX00. The highest reported SAR is 1.06 W/kg. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body exposure conditions with 1.2 cm separation is 0.15 W/kg. The highest reported SAR value for body exposure conditions with 0.5 cm separation is 0.39 W/Kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Annie Cheng
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Rayonnant Technology Co., LTD.
FCC Registration Number (FRN): 0027747435
Alphanumeric FCC ID: 2AQTFCAX00WB
Unique Application Identifier: 6sElkAoQrPBcZr5sY8zIGA==
Line one: No.581, Ruiguang Rd., Neihu District,
City: Taipei City
State: N/A
Country: Taiwan
Zip Code: 11492

TCB Information
TCB Application Email Address: tcb@siemic.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AQTF
Product Code: -CAX00WB

Person at the applicant's address to receive grant or for contact
Name: Sam Wang
Title: Deputy general manager
Telephone Number: 287978588 Extension: 11842
Fax Number: +886-3-4398155
Email: Sam_Wang@Rayon-Nant.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/07/2019
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: GKR-CAX00WB Grant Date: 07/12/2017

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
First Name:   Ken
Last Name:   Liu
Telephone Number: +886-(0)3-318-3232 Extension: 1609
Fax Number:  +886-(0)3-211-5834
E-mail:  ken.liu@tw.bureauveritas.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
CIIPC to add host COMPAL Rugged Tablet model CAXA0 and series model. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are <0.1 W/kg and and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are <0.1 W/kg and and 0.65 W/kg respectively.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Annie Cheng
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Rayonnant Technology Co., LTD.
FCC Registration Number (FRN): 0027747435
Alphanumeric FCC ID: 2AQTFCAX00WB
Unique Application Identifier: I2fPDT4b4qv/XGCx61seeA==
Line one: No.581, Ruiguang Rd., Neihu District,
City: Taipei City
State: N/A
Country: Taiwan
Zip Code: 11492

TCB Information
TCB Application Email Address: tcb@siemic.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AQTF
Product Code: -CAX00WB

Person at the applicant's address to receive grant or for contact
Name: Sam Wang
Title: Deputy general manager
Telephone Number: 287978588 Extension: 11842
Fax Number: +886-3-4398155
Email: Sam_Wang@Rayon-Nant.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/07/2019
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: GKR-CAX00WB Grant Date: 07/12/2017

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
First Name:   Ken
Last Name:   Liu
Telephone Number: +886-(0)3-318-3232 Extension: 1609
Fax Number:  +886-(0)3-211-5834
E-mail:  ken.liu@tw.bureauveritas.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
CIIPC to add host COMPAL Rugged Tablet model CAXA0 and series model. The highest reported SAR for body and simultaneous transmission mode are 0.77 W/kg and 0.85 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are 0.56 W/kg and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are 0.63 W/Kg and 0.65 W/kg respectively.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Annie Cheng
Title of authorized signature: 

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/07/2018

Application Dated: 09/07/2018
Rayonnant Technology Co., LTD.
No.581, Ruiguang Rd., Neihu District,
Taipei City, 11492
Taiwan
 
Attention: Sam Wang , Deputy general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQTF-CAX00WB
Name of Grantee:  Rayonnant Technology Co., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  
CC 15C 2402.0  -  2480.0 0.013  

CIIPC to add host COMPAL Rugged Tablet model CAXA0 and series model. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are <0.1 W/kg and and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are <0.1 W/kg and and 0.65 W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rayonnant Technology Co., LTD.
No.581, Ruiguang Rd., Neihu District,
Taipei City, 11492
Taiwan
  Date of Grant: 09/07/2018

Application Dated: 09/07/2018
 
Attention: Sam Wang , Deputy general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQTF-CAX00WB
Name of Grantee:  Rayonnant Technology Co., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  
CC 15C 2402.0  -  2480.0 0.013  

CIIPC to add host COMPAL Rugged Tablet model CAXA0 and series model. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are <0.1 W/kg and and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are <0.1 W/kg and and 0.65 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA314523
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/07/2018

Application Dated: 09/07/2018
Rayonnant Technology Co., LTD.
No.581, Ruiguang Rd., Neihu District,
Taipei City, 11492
Taiwan
 
Attention: Sam Wang , Deputy general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQTF-CAX00WB
Name of Grantee:  Rayonnant Technology Co., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.054  
CC 15E 5190.0  -  5230.0 0.035  
CC 15E 5210.0  -  5210.0 0.014  
CC 15E 5260.0  -  5320.0 0.055  
CC 15E 5270.0  -  5310.0 0.046  
CC 15E 5290.0  -  5290.0 0.017  
CC 15E 5500.0  -  5720.0 0.053  
CC 15E 5510.0  -  5710.0 0.045  
CC 15E 5530.0  -  5690.0 0.041  
CC 15E 5745.0  -  5825.0 0.057  
CC 15E 5755.0  -  5795.0 0.035  
CC 15E 5775.0  -  5775.0 0.021  

CIIPC to add host COMPAL Rugged Tablet model CAXA0 and series model. The highest reported SAR for body and simultaneous transmission mode are 0.77 W/kg and 0.85 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are 0.56 W/kg and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are 0.63 W/Kg and 0.65 W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rayonnant Technology Co., LTD.
No.581, Ruiguang Rd., Neihu District,
Taipei City, 11492
Taiwan
  Date of Grant: 09/07/2018

Application Dated: 09/07/2018
 
Attention: Sam Wang , Deputy general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQTF-CAX00WB
Name of Grantee:  Rayonnant Technology Co., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.054  
CC 15E 5190.0  -  5230.0 0.035  
CC 15E 5210.0  -  5210.0 0.014  
CC 15E 5260.0  -  5320.0 0.055  
CC 15E 5270.0  -  5310.0 0.046  
CC 15E 5290.0  -  5290.0 0.017  
CC 15E 5500.0  -  5720.0 0.053  
CC 15E 5510.0  -  5710.0 0.045  
CC 15E 5530.0  -  5690.0 0.041  
CC 15E 5745.0  -  5825.0 0.057  
CC 15E 5755.0  -  5795.0 0.035  
CC 15E 5775.0  -  5775.0 0.021  

CIIPC to add host COMPAL Rugged Tablet model CAXA0 and series model. The highest reported SAR for body and simultaneous transmission mode are 0.77 W/kg and 0.85 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are 0.56 W/kg and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are 0.63 W/Kg and 0.65 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA482802
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/07/2018

Application Dated: 09/07/2018
Rayonnant Technology Co., LTD.
No.581, Ruiguang Rd., Neihu District,
Taipei City, 11492
Taiwan
 
Attention: Sam Wang , Deputy general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQTF-CAX00WB
Name of Grantee:  Rayonnant Technology Co., LTD.
Equipment Class: Digital Transmission System
Notes: Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2412.0  -  2462.0 0.246  
CC 15C 2422.0  -  2452.0 0.189  

CIIPC to add host COMPAL Rugged Tablet model CAX00. The highest reported SAR is 1.06 W/kg. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body exposure conditions with 1.2 cm separation is 0.15 W/kg. The highest reported SAR value for body exposure conditions with 0.5 cm separation is 0.39 W/Kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rayonnant Technology Co., LTD.
No.581, Ruiguang Rd., Neihu District,
Taipei City, 11492
Taiwan
  Date of Grant: 09/07/2018

Application Dated: 09/07/2018
 
Attention: Sam Wang , Deputy general manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQTF-CAX00WB
Name of Grantee:  Rayonnant Technology Co., LTD.
Equipment Class: Digital Transmission System
Notes: Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2412.0  -  2462.0 0.246  
CC 15C 2422.0  -  2452.0 0.189  

CIIPC to add host COMPAL Rugged Tablet model CAX00. The highest reported SAR is 1.06 W/kg. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body exposure conditions with 1.2 cm separation is 0.15 W/kg. The highest reported SAR value for body exposure conditions with 0.5 cm separation is 0.39 W/Kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA169558

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details