BF-LAMP-B LED Mood Lamp_Brown Test Report LINE Friends Corporation

LINE Friends Corporation LED Mood Lamp_Brown

Page 1 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 2 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 3 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 4 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 5 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 6 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 7 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 8 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 9 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 10 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 11 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 12 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 13 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 14 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 15 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 16 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 17 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 18 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 19 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 20 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 21 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Page 22 of BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
Fax:
Email:
Report No.: SZEM181100974702
Page:
1 of 22
+86 (0) 755 2601 2053
+86 (0) 755 2671 0594
ee.shenzhen@sgs.com
TEST REPORT
Application No.:
SZEM1811009747CR
Applicant:
LINE Friends Corporation
Address of Applicant:
200, Itaewon-ro, Yongsan-gu, Seoul, South Korea
Manufacturer:
LINE Friends Corporation
Address of Manufacturer:
200, Itaewon-ro, Yongsan-gu, Seoul, South Korea
Factory:
Arts Electronics Co., Ltd.
NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN,
DONGGUAN CITY, GUANGDONG PROVINCE, CHINA
Address of Factory:
Equipment Under Test (EUT):
EUT Name:
LED Mood Lamp_Brown
Model No.:
BF-LAMP-B
FCC ID
2AQTS-BF-LAMP-B
Standard(s) :
47 CFR Part 15, Subpart C 15.231
Date of Receipt:
2018-11-12
Date of Test:
2018-11-23 to 2018-11-29
Date of Issue:
2018-12-05
Test Result:
Pass*
* In the configuration tested, the EUT complied with the standards specified above.
Keny Xu
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International
Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International
Electrical Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
2 of 22
Revision Record
Version
Chapter
01
Date
2018-12-05
Modifier
Remark
Original
Authorized for issue by:
Benson Wang /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
3 of 22
Test Summary
Radio Spectrum Technical Requirement
Item
Standard
Method
Requirement
Result
Antenna Requirement
47 CFR Part 15,
Subpart C 15.231
N/A
47 CFR Part 15, Subpart
C 15.203
Pass
N/A: Not applicable
Radio Spectrum Matter Part
Item
Standard
Method
Requirement
Result
20dB Bandwidth
47 CFR Part 15,
Subpart C 15.231
ANSI C63.10 (2013)
Section 6.9
47 CFR Part 15, Subpart
C 15.231(c)
Pass
Dwell Time
(15.231(a))
47 CFR Part 15,
Subpart C 15.231
ANSI C63.10 (2013)
Section 7.8.4
47 CFR Part 15, Subpart
C 15.231(a)
Pass
Field Strength of the
Fundamental Signal
(15.231(b))
47 CFR Part 15,
Subpart C 15.231
ANSI C63.10 (2013)
Section 6.5
47 CFR Part 15C Section
15.231(b)
Pass
Spurious Emissions
47 CFR Part 15,
Subpart C 15.231
ANSI C63.10 (2013)
Section 6.4&6.5&6.6
47 CFR Part 15C Section
15.231(b) and 15.209
Pass
N/A: Not applicable
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
4 of 22
Contents
Page
COVER PAGE ............................................................................................................................................1
TEST SUMMARY .......................................................................................................................................3
CONTENTS ................................................................................................................................................4
GENERAL INFORMATION ........................................................................................................................5
4.1
4.2
4.3
4.4
4.5
4.6
4.7
DETAILS OF E.U.T. ...............................................................................................................................5
DESCRIPTION OF SUPPORT UNITS .........................................................................................................5
MEASUREMENT UNCERTAINTY ..............................................................................................................5
TEST LOCATION....................................................................................................................................6
TEST FACILITY......................................................................................................................................6
DEVIATION FROM STANDARDS ...............................................................................................................6
ABNORMALITIES FROM STANDARD CONDITIONS .....................................................................................6
EQUIPMENT LIST ......................................................................................................................................7
RADIO SPECTRUM TECHNICAL REQUIREMENT .................................................................................9
6.1
ANTENNA REQUIREMENT ......................................................................................................................9
6.1.1 Test Requirement: .........................................................................................................................9
6.1.2 Conclusion .....................................................................................................................................9
RADIO SPECTRUM MATTER TEST RESULTS .....................................................................................10
7.1
20DB BANDWIDTH ..............................................................................................................................10
7.1.1 E.U.T. Operation ..........................................................................................................................10
7.1.2 Test Setup Diagram .....................................................................................................................10
7.1.3 Measurement Procedure and Data.............................................................................................10
7.2
DWELL TIME (15.231(A)) ....................................................................................................................12
7.2.1 E.U.T. Operation ..........................................................................................................................12
7.2.2 Test Setup Diagram .....................................................................................................................12
7.2.3 Measurement Procedure and Data.............................................................................................12
7.3
FIELD STRENGTH OF THE FUNDAMENTAL SIGNAL (15.231(B)) AND SPURIOUS EMISSIONS ......................14
7.3.1 E.U.T. Operation ..........................................................................................................................15
7.3.2 Test Setup Diagram .....................................................................................................................15
7.3.3 Measurement Procedure and Data.............................................................................................16
PHOTOGRAPHS ......................................................................................................................................22
8.1
8.2
TEST SETUP .......................................................................................................................................22
EUT CONSTRUCTIONAL DETAILS (EUT PHOTOS).................................................................................22
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
5 of 22
General Information
4.1 Details of E.U.T.
Power supply:
Remote control: 1 x 3.0V CR2025 battery
Operation Frequency:
433.879MHz
Modulation Type:
FSK
Number of Channels:
Antenna Type:
Integral antenna
Antenna Gain:
0dBi
4.2 Description of Support Units
The EUT has been tested as an independent unit.
4.3 Measurement Uncertainty
No.
Item
Measurement Uncertainty
Radio Frequency
± 7.25 x 10-8
Duty cycle
± 0.37%
Occupied Bandwidth
± 3%
RF conducted power
± 0.75dB
RF power density
± 2.84dB
Conducted Spurious emissions
± 0.75dB
RF Radiated power
Radiated Spurious emission test
Temperature test
± 1°C
10
Humidity test
± 3%
11
Supply voltages
± 1.5%
12
Time
± 3%
± 4.5dB (below 1GHz)
± 4.8dB (above 1GHz)
± 4.5dB (Below 1GHz)
± 4.8dB (Above 1GHz)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
6 of 22
4.4 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.
518057.
Tel: +86 755 2601 2053
Fax: +86 755 2671 0594
No tests were sub-contracted.
4.5 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz,
Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port
Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have
been registered in accordance with the Regulations for Voluntary Control Measures with Registration
No.: G-20026, R-14188, C-12383 and T-11153 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Innovation, Science and Economic Development Canada
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
by ISED as an accredited testing laboratory.
CAB identifier: CN0006.
IC#: 4620C.
4.6 Deviation from Standards
None
4.7 Abnormalities from Standard Conditions
None
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
7 of 22
Equipment List
20dB Bandwidth
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2018-09-25
2019-09-24
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2018-09-27
2019-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2018-09-27
2019-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2018-09-25
2019-09-24
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
Dwell Time (15.231(a))
Equipment
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2018-09-25
2019-09-24
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2018-09-27
2019-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2018-09-27
2019-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2018-09-25
2019-09-24
RE in Chamber
Test Equipment
3m Semi-Anechoic
Chamber
MXE EMI Receiver
(20Hz-8.4GHz)
BiConiLog Antenna
(26-3000MHz)
Pre-amplifier
(0.1-1300MHz)
Measurement
Software
Coaxial Cable
Manufacturer
Model No.
Inventory No.
Cal. Date
Cal. Due date
ETS-LINDGREN
N/A
SEM001-01
2017-08-05
2020-08-04
Agilent Technologies
N9038A
SEM004-05
2018-09-25
2019-09-24
ETS-LINDGREN
3142C
SEM003-01
2017-06-27
2020-06-26
Agilent Technologies
8447D
SEM005-01
2018-04-02
2019-04-01
AUDIX
e3 V8.2014-6-27
N/A
N/A
SGS
N/A
SEM025-01
2018-07-12
2019-07-11
Manufacturer
Model No.
Inventory No.
Cal. Date
Cal. Due date
N/A
SEM001-02
2018-03-13
2021-03-12
N9010A
SEM004-09
2018-04-13
2019-04-12
3142C
SEM003-01
2017-06-27
2020-06-26
N/A
RE in Chamber
Test Equipment
3m Semi-Anechoic
AUDIX
Chamber
EXA Signal Analyzer Agilent Technologies
(10Hz-26.5GHz)
Inc
BiConiLog Antenna
ETS-Lindgren
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
8 of 22
(26-3000MHz)
Horn Antenna
(800MHz-18GHz)
Amplifier
(0.1-1300MHz)
Pre-Amplifier
(0.1-26.5GHz)
Band filter
Measurement
Software
Rohde & Schwarz
HF907
SEM003-07
2018-04-13
2021-04-12
HP
8447D
SEM005-02
2018-09-25
2019-09-24
Compliance Directions
Systems Inc.
PAP-0126
SEM004-11
2018-09-27
2019-09-26
N/A
N/A
N/A
N/A
AUDIX
e3 V8.2014-6-27
N/A
N/A
N/A
N/A
SGS
N/A
SEM026-01
2018-07-12
2019-07-11
Coaxial Cable
General used equipment
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
Humidity/ Temperature
Indicator
Shanghai
Meteorological
Industry Factory
ZJ1-2B
SEM002-03
2018-09-27
2019-09-26
Humidity/ Temperature
Indicator
Shanghai
Meteorological
Industry Factory
ZJ1-2B
SEM002-04
2018-09-27
2019-09-26
Humidity/ Temperature
Indicator
Mingle
N/A
SEM002-08
2018-09-27
2019-09-26
Barometer
Changchun
Meteorological
Industry Factory
DYM3
SEM002-01
2018-04-08
2019-04-07
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
9 of 22
Radio Spectrum Technical Requirement
6.1 Antenna Requirement
6.1.1 Test Requirement:
47 CFR Part 15, Subpart C 15.203
6.1.2 Conclusion
Standard Requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of an antenna that uses a unique coupling
to the intentional radiator, the manufacturer may design the unit permanently attached antenna or of
an so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or
electrical connector is prohibited.
EUT Antenna:
The antenna is Welding fixed on the main PCB and no consideration of replacement. The best case
gain of the antenna is 0dBi.
Antenna location: Refer to Internal photos.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
10 of 22
Radio Spectrum Matter Test Results
7.1 20dB Bandwidth
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.231(c)
ANSI C63.10 (2013) Section 6.9
Frequency range(MHz)
Limit
70-900
No wider than 0.25% of the center frequency
Above 900
No wider than 0.5% of the center frequency
7.1.1 E.U.T. Operation
Operating Environment:
Atmospheric Pressure: 1020
Temperature:
24.2 °C
Humidity: 44.3 % RH
Test mode
b:TX mode_Keep the EUT in transmitting with modulation mode.
7.1.2 Test Setup Diagram
mbar
7.1.3 Measurement Procedure and Data
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
11 of 22
Mode b:
* RBW 1 kHz
* VBW 3 kHz
Ref
5 dBm
* Att
0 dB
SWT 100 ms
Marker 1 [T1 ]
-44.95
433.868944103
Marker 2 [T1 ]
-24.40
433.879560000
1 PK
VIEW
Delta 1 [T1 ]
-0.22 dB
21.056666666 kHz
-10
-20
dBm
MHz
dBm
MHz
-30
-40
D1 -44.4 dBm
-50
3DB
-60
-70
-80
-90
Center
433.879 MHz
10 kHz/
Span
100 kHz
Measurement Data
20dB bandwidth (MHz)
Limit (MHz)
Results
0.02
1.08
Pass
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
12 of 22
7.2 Dwell Time (15.231(a))
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.231(a)
ANSI C63.10 (2013) Section 7.8.4
Device type
Manually operated transmitter
Automatically actived transmitter
Periodic transmissions to determine system integrity of
transmitters used in security or safety applications
Limit
The switch automatically deactivate the
transmitter within not more than 5 seconds of
being released
Cease transmission within 5 seconds after
activation
The total transmission time does not exceed
2 seconds per hour
7.2.1 E.U.T. Operation
Operating Environment:
Temperature:
24.2 °C
Atmospheric Pressure: 1020
Humidity: 44.3 % RH
Test mode
b:TX mode_Keep the EUT in transmitting with modulation mode.
7.2.2 Test Setup Diagram
mbar
7.2.3 Measurement Procedure and Data
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
13 of 22
Mode b:
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
20 dB
SWT 10 s
10
Delta 1 [T1 ]
-0.90 dB
200.000000 ms
Marker 1 [T1 ]
-14.33 dBm
3.280000 s
SGL
1 PK *
CLRWR
-10
11
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 433.879 MHz
1 s/
Measurement Data
Transmitting time
Limit
Results
0.2S
≤5S
Pass
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
14 of 22
7.3 Field Strength of the Fundamental Signal (15.231(b)) and Spurious Emissions
Test Requirement
Test Method:
Measurement Distance:
Limit:
47 CFR Part 15C Section 15.231(b) and 15.209
ANSI C63.10 (2013) Section 6.5
3m
The limits on the field strength of the spurious emissions in the above table
are based on the fundamental frequency of the intentional radiator. Spurious
emissions shall be attenuated to the average (or, alternatively, CISPR
quasi-peak) limits shown in this table or to the general limits shown in§
15.209, whichever limit permits a higher field strength.
Fundamental
frequency(MHz)
Field strength of
fundamental(microvolts/meter)
Field strength of spurious
emissions(microvolts/meter)
40.66-40.70
2250
225
70-130
1250
125
130-174
1250 to 3750
125 to 375
174-260
3750
375
260-470
3750 to 12500
375 to 1250
Above 470
12500
1250
Remark: the emission limit is based on measurement instrumentation employing an average detector
at a distance of 3 meters. The frequencies above 1000MHz are based on average limits. However, the
peak field strength of any emission shall not exceed the maximum permitted average limits specified
above by more than 20 dB under any condition of modulation.
or
Frequency(MHz)
Field
strength(microvolts/meter)
Measurement
distance(meters)
0.009-0.490
2400/F(kHz)
300
0.490-1.705
24000/F(kHz)
30
1.705-30.0
30
30
30-88
100
88-216
150
216-960
200
Above 960
500
Remark: The emission limits shown in the above table are based on measurements employing a
CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000
MHz. Radiated emission limits in these three bands are based on measurements employing an
average detector, the peak field strength of any emission shall not exceed the maximum permitted
average limits specified above by more than 20 dB under any condition of modulation.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
15 of 22
7.3.1 E.U.T. Operation
Operating Environment:
Temperature:
22.6 °C
Atmospheric Pressure: 1020
Humidity: 55 % RH
Test mode
b:TX mode_Keep the EUT in transmitting with modulation mode.
7.3.2 Test Setup Diagram
mbar
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
16 of 22
7.3.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at
a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position
of the highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was
mounted on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find
the maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that
did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method
as specified and then reported in a data sheet.
h. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis
positioning which it is worse case, only the test worst case mode is recorded in the report.
Remark:
1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The
basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor
2) Scan from 9KHz to 5GHz, the disturbance below 30MHz and from 30Mhz to 1GHz was very low.
The points marked on above plots are the highest emissions could be found when testing, so only
above points had been displayed. The amplitude of spurious emissions from the radiator which are
attenuated more than 20dB below the limit need not be reported.
Mode b:
Ton time = 11.35ms
Calculate Formula:
T period = 26.88ms
Duty cycle= T on time / T period=0.42
PDCF=20 log(Duty cycle)= -7.54dB
Average value= Peak value + PDCF
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
17 of 22
* RBW 1 MHz
* VBW 1 MHz
Ref
5 dBm
* Att
0 dB
* SWT 100 ms
SGL
1 PK *
VIEW
-10
-20
-30
-40
-50
3DB
-60
-70
-80
-90
Center
433.879 MHz
10 kHz/
RBW 1 MHz
* VBW 1 MHz
Ref
5 dBm
* Att
0 dB
SWT 30 ms
Marker 4 [T1 ]
-22.75 dBm
9.951923 ms
432.692308 µs
Delta 2 [T1 ]
0.10 dB
26.875000 ms
Marker 3 [T1 ]
-10
-20
100 kHz
Marker 1 [T1 ]
-22.69 dBm
1 PK *
VIEW
Span
34
-22.58
9.807692
Delta 1 [T1 ]
-0.11
528.846154
-30
SGL
dBm
ms
dB
µs
-40
-50
3DB
-60
-70
-80
-90
Center 433.879 MHz
3 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
18 of 22
Field Strength Of The Fundamental Signal:
Peak
Average Average
Peak
Limit
Limit
level
Level
_Line
_Line
(dBuV/m) (dBuV/m) (dBuV/m) (dBuV/m)
Polarization
Freq
(MHz)
Cable
_Loss
(dB)
Antenna
_Factor
(dB/m)
Preamp
_Gain
(dB)
Read
_Level
(dBuV)
Horizontal
433.879
2.35
23.2
27.34
81.27
79.48
100.8
71.94
80.8
Vertical
433.879
2.35
23.2
27.34
68.54
66.75
100.8
59.21
80.8
Spurious Emission:
Below 1G:
Test mode: b, Polarization: Horizontal;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
19 of 22
Test mode: b, Polarization: Vertical;
Polarization
Freq
(MHz)
Cable
_Loss
(dB)
Antenna
_Factor
(dB/m)
Preamp
_Gain
(dB)
Read
_Level
(dBuV)
Horizontal
867.758
3.49
29.41
27.18
37.06
Vertical
867.758
3.49
29.41
27.18
37.21
Limit
_Line
(dBuV/m)
Over
Limit
42.78
61.94
-19.16
42.93
61.94
-19.01
Quasipeak
Level
(dBuV/m)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
20 of 22
Above 1G:
Polarization: Horizontal
Average:
Frequency (MHz)
AV factor(-dB)
Average level
(dBuV/m)
Limit (dBuV/m)
Over Limit
(dBuV/m)
Remark
1299.000
-7.54
32.14
61.94
-29.80
Average
1732.000
-7.54
38.52
61.94
-23.42
Average
2165.000
-7.54
43.29
61.94
-18.65
Average
2598.000
-7.54
42.89
61.94
-19.05
Average
3031.000
-7.54
44.62
61.94
-17.32
Average
3464.000
-7.54
41.95
61.94
-19.99
Average
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
21 of 22
Polarization: Vertical
Average:
Limit (dBuV/m)
Over Limit
(dBuV/m)
Remark
-7.54
Average level
(dBuV/m)
28.24
61.94
-33.70
Average
1427.159
-7.54
29.53
61.94
-32.41
Average
1732.000
2165.000
-7.54
-7.54
31.67
32.74
61.94
61.94
-30.27
-29.20
Average
Average
2765.343
-7.54
34.92
54.00
-19.08
Average
3883.575
-7.54
39.66
54.00
-14.34
Average
Frequency (MHz)
AV factor(-dB)
1299.000
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM181100974702
Page:
22 of 22
Photographs
8.1 Test Setup
Please refer to setup photos.
8.2 EUT Constructional Details (EUT Photos)
Please Refer to external and internal photos for details.
- End of the Report -
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
Download: BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Mirror Download [FCC.gov]BF-LAMP-B LED Mood Lamp_Brown Test Report  LINE Friends Corporation
Document ID4116175
Application IDcblRp8ss4KamM1D+XEiVxQ==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize45.64kB (570522 bits)
Date Submitted2018-12-25 00:00:00
Date Available2018-12-25 00:00:00
Creation Date2018-12-21 14:19:05
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2018-12-21 06:19:07
Document TitleTest Report
Document CreatorPScript5.dll Version 5.2.2
Document Author: yuxiu_yang

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 22
Create Date                     : 2018:12:21 14:19:05+08:00
Title                           : Microsoft Word - SZEM181100974702-FCC ID  433MHz  RPT.doc
Producer                        : GPL Ghostscript 8.64
Author                          : yuxiu_yang
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2018:12:21 06:19:07Z