SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd

Samsung Electronics Co Ltd GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC

Page 1 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 2 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 3 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 4 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 5 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 6 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 7 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 8 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 9 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 10 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 11 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 12 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 13 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 14 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 15 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 16 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 17 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 18 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 19 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 20 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 21 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 22 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 23 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 24 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 25 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 26 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 27 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 28 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 29 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 30 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 31 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 32 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 33 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 34 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 35 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 36 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 37 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 38 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 39 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 40 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 41 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 42 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Page 43 of SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd

Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-21
GSM 850
Frequency: 836.6 MHz; Duty Cycle: 1:2.60016;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.905 S/m; εr = 40.998; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE3 Sn479; Calibrated: 2017-10-23
- Probe: EX3DV4 - SN7330; ConvF(10.43, 10.43, 10.43); Calibrated: 2018-01-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM (20deg probe tilt) with CRP v5.0(Right); Type: QD000P40CD; Serial: TP:1846
RHS/Touch_GPRS_3 slots_ch 190/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.286 W/kg
RHS/Touch_GPRS_3 slots_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 18.18 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 0.325 W/kg
SAR(1 g) = 0.260 W/kg; SAR(10 g) = 0.200 W/kg
Maximum value of SAR (measured) = 0.289 W/kg
0 dB = 0.289 W/kg = -5.39 dBW/kg
Plot No. 1
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-20
GSM 850
Frequency: 836.6 MHz; Duty Cycle: 1:2.60016;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.999 S/m; εr = 52.947; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE3 Sn479; Calibrated: 2017-10-23
- Probe: EX3DV4 - SN7330; ConvF(10.09, 10.09, 10.09); Calibrated: 2018-01-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: ELI v6.0; Type: QDOVA003AA; Serial: TP:2005
Rear/GPRS_3 slots_ch 190/Area Scan (13x8x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.800 W/kg
Rear/GPRS_3 slots_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 27.33 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 1.01 W/kg
SAR(1 g) = 0.734 W/kg; SAR(10 g) = 0.511 W/kg
Maximum value of SAR (measured) = 0.860 W/kg
0 dB = 0.860 W/kg = -0.66 dBW/kg
Plot No. 2
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-19
GSM 850
Frequency: 836.6 MHz; Duty Cycle: 1:2.60016;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.006 S/m; εr = 54.126; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(10.1, 10.1, 10.1); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/GPRS_3 slots_ch 190/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.857 W/kg
Rear/GPRS_3 slots_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 30.64 V/m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 1.19 W/kg
SAR(1 g) = 0.663 W/kg; SAR(10 g) = 0.365 W/kg
Maximum value of SAR (measured) = 0.893 W/kg
0 dB = 0.893 W/kg = -0.49 dBW/kg
Plot No. 3
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-25
GSM 1900
Frequency: 1880 MHz; Duty Cycle: 1:1.99986;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1880 MHz; σ = 1.406 S/m; εr = 39.808; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(8.31, 8.31, 8.31); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM Phantom CRP v5.0(Middle); Type: QD000P40CD; Serial: TP:1854
LHS/Touch_GPRS 4slots_ch 661/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.113 W/kg
LHS/Touch_GPRS 4slots_ch 661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 9.617 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 0.158 W/kg
SAR(1 g) = 0.099 W/kg; SAR(10 g) = 0.061 W/kg
Maximum value of SAR (measured) = 0.124 W/kg
0 dB = 0.124 W/kg = -9.07 dBW/kg
Plot No. 4
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-13
GSM 1900
Frequency: 1880 MHz; Duty Cycle: 1:1.99986;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1880 MHz; σ = 1.562 S/m; εr = 54.232; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.05, 8.05, 8.05); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/GPRS_4 slots_ch 661/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.487 W/kg
Rear/GPRS_4 slots_ch 661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 17.76 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 0.710 W/kg
SAR(1 g) = 0.428 W/kg; SAR(10 g) = 0.240 W/kg
Maximum value of SAR (measured) = 0.553 W/kg
0 dB = 0.553 W/kg = -2.57 dBW/kg
Plot No. 5
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-13
GSM 1900
Frequency: 1880 MHz; Duty Cycle: 1:1.99986;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1880 MHz; σ = 1.562 S/m; εr = 54.232; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.05, 8.05, 8.05); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/GPRS_4 slots_ch 661/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.842 W/kg
Rear/GPRS_4 slots_ch 661/Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 23.04 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 1.09 W/kg
SAR(1 g) = 0.617 W/kg; SAR(10 g) = 0.317 W/kg
Maximum value of SAR (measured) = 0.813 W/kg
0 dB = 0.813 W/kg = -0.90 dBW/kg
Plot No. 6
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-08
W-CDMA Band II
Frequency: 1880 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1880 MHz; σ = 1.438 S/m; εr = 39.916; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(8.31, 8.31, 8.31); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM Phantom CRP v5.0(Middle); Type: QD000P40CD; Serial: TP:1854
LHS/Touch_Rel.99 ch 9400/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.121 W/kg
LHS/Touch_Rel.99 ch 9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 6.259 V/m; Power Drift = 0.16 dB
Peak SAR (extrapolated) = 0.171 W/kg
SAR(1 g) = 0.106 W/kg; SAR(10 g) = 0.0649 W/kg
Maximum value of SAR (measured) = 0.132 W/kg
0 dB = 0.132 W/kg = -8.79 dBW/kg
Plot No. 7
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-09
W-CDMA Band II
Frequency: 1880 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1880 MHz; σ = 1.56 S/m; εr = 53.823; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.05, 8.05, 8.05); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/Rel.99 Ch 9400/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.785 W/kg
Rear/Rel.99 Ch 9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 22.99 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 1.04 W/kg
SAR(1 g) = 0.626 W/kg; SAR(10 g) = 0.349 W/kg
Maximum value of SAR (measured) = 0.807 W/kg
0 dB = 0.807 W/kg = -0.93 dBW/kg
Plot No. 8
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-09
W-CDMA Band II
Frequency: 1852.4 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 1852.4 MHz; σ = 1.536 S/m; εr = 53.907; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.05, 8.05, 8.05); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Edge 3/Rel.99 Ch 9262/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 1.14 W/kg
Edge 3/Rel.99 Ch 9262/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 28.25 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 1.62 W/kg
SAR(1 g) = 0.939 W/kg; SAR(10 g) = 0.495 W/kg
Maximum value of SAR (measured) = 1.23 W/kg
0 dB = 1.23 W/kg = 0.90 dBW/kg
Plot No. 9
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-29
W-CDMA Band IV
Frequency: 1712.4 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 1712.4 MHz; σ = 1.285 S/m; εr = 39.618; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(8.65, 8.65, 8.65); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM Phantom CRP v5.0(Middle); Type: QD000P40CD; Serial: TP:1854
LHS/Touch_Rel.99 ch 1312/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.167 W/kg
LHS/Touch_Rel.99 ch 1312/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 11.71 V/m; Power Drift = 0.13 dB
Peak SAR (extrapolated) = 0.205 W/kg
SAR(1 g) = 0.139 W/kg; SAR(10 g) = 0.090 W/kg
Maximum value of SAR (measured) = 0.168 W/kg
0 dB = 0.168 W/kg = -7.75 dBW/kg
Plot No. 10
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-27
W-CDMA Band IV
Frequency: 1712.4 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 1712.4 MHz; σ = 1.41 S/m; εr = 53.707; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.41, 8.41, 8.41); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/Rel.99 Ch 1312/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.734 W/kg
Rear/Rel.99 Ch 1312/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 24.39 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 1.06 W/kg
SAR(1 g) = 0.670 W/kg; SAR(10 g) = 0.388 W/kg
Maximum value of SAR (measured) = 0.846 W/kg
0 dB = 0.846 W/kg = -0.73 dBW/kg
Plot No. 11
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-27
W-CDMA Band IV
Frequency: 1712.4 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 1712.4 MHz; σ = 1.41 S/m; εr = 53.707; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.41, 8.41, 8.41); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/Rel.99 Ch 1312/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.857 W/kg
Rear/Rel.99 Ch 1312/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 23.77 V/m; Power Drift = -0.11 dB
Peak SAR (extrapolated) = 1.12 W/kg
SAR(1 g) = 0.661 W/kg; SAR(10 g) = 0.353 W/kg
Maximum value of SAR (measured) = 0.850 W/kg
0 dB = 0.850 W/kg = -0.71 dBW/kg
Plot No. 12
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-24
W-CDMA Band V
Frequency: 836.6 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.91 S/m; εr = 42.531; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1447; Calibrated: 2017-11-22
- Probe: EX3DV4 - SN7330; ConvF(10.43, 10.43, 10.43); Calibrated: 2018-01-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM (20deg probe tilt) with CRP v5.0(Right); Type: QD000P40CD; Serial: TP:1846
RHS/Touch_Rel.99 ch 4183/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.185 W/kg
RHS/Touch_Rel.99 ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 14.60 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 0.210 W/kg
SAR(1 g) = 0.168 W/kg; SAR(10 g) = 0.130 W/kg
Maximum value of SAR (measured) = 0.187 W/kg
0 dB = 0.187 W/kg = -7.28 dBW/kg
Plot No. 13
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-24
W-CDMA Band V
Frequency: 836.6 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.999 S/m; εr = 52.945; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1447; Calibrated: 2017-11-22
- Probe: EX3DV4 - SN7330; ConvF(10.09, 10.09, 10.09); Calibrated: 2018-01-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: ELI v6.0; Type: QDOVA003AA; Serial: TP:2005
Rear/Rel.99 ch4183/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.475 W/kg
Rear/Rel.99 ch4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 22.12 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 0.573 W/kg
SAR(1 g) = 0.414 W/kg; SAR(10 g) = 0.287 W/kg
Maximum value of SAR (measured) = 0.474 W/kg
0 dB = 0.474 W/kg = -3.24 dBW/kg
Plot No. 14
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-24
W-CDMA Band V
Frequency: 826.4 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 826.4 MHz; σ = 0.988 S/m; εr = 53.039; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1447; Calibrated: 2017-11-22
- Probe: EX3DV4 - SN7330; ConvF(10.09, 10.09, 10.09); Calibrated: 2018-01-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: ELI v6.0; Type: QDOVA003AA; Serial: TP:2005
Rear/Rel.99 ch4132/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.976 W/kg
Rear/Rel.99 ch4132/Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 31.55 V/m; Power Drift = 0.00 dB
Peak SAR (extrapolated) = 1.71 W/kg
SAR(1 g) = 0.916 W/kg; SAR(10 g) = 0.497 W/kg
Maximum value of SAR (measured) = 1.23 W/kg
0 dB = 1.23 W/kg = 0.90 dBW/kg
Plot No. 15
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-25
LTE Band 2
Frequency: 1880 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1880 MHz; σ = 1.406 S/m; εr = 39.808; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(8.31, 8.31, 8.31); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM Phantom CRP v5.0(Middle); Type: QD000P40CD; Serial: TP:1854
LHS/Touch_QPSK RB 1/49 ch 18900/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.129 W/kg
LHS/Touch_QPSK RB 1/49 ch 18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 6.238 V/m; Power Drift = 0.18 dB
Peak SAR (extrapolated) = 0.174 W/kg
SAR(1 g) = 0.109 W/kg; SAR(10 g) = 0.066 W/kg
Maximum value of SAR (measured) = 0.136 W/kg
0 dB = 0.136 W/kg = -8.66 dBW/kg
Plot No. 16
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-10
LTE Band 2
Frequency: 1880 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1880 MHz; σ = 1.56 S/m; εr = 53.823; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.05, 8.05, 8.05); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/49 Ch 18900/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.732 W/kg
Rear/QPSK RB 1/49 Ch 18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 22.60 V/m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 1.01 W/kg
SAR(1 g) = 0.601 W/kg; SAR(10 g) = 0.334 W/kg
Maximum value of SAR (measured) = 0.779 W/kg
0 dB = 0.779 W/kg = -1.08 dBW/kg
Plot No. 17
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-30
LTE Band 2
Frequency: 1860 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1860 MHz; σ = 1.529 S/m; εr = 53.783; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.05, 8.05, 8.05); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/49 Ch 18700/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 1.06 W/kg
Rear/QPSK RB 1/49 Ch 18700/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 26.97 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 1.51 W/kg
SAR(1 g) = 0.859 W/kg; SAR(10 g) = 0.443 W/kg
Maximum value of SAR (measured) = 1.11 W/kg
0 dB = 1.11 W/kg = 0.45 dBW/kg
Plot No. 18
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-24
LTE Band 5
Frequency: 836.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.91 S/m; εr = 42.532; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1447; Calibrated: 2017-11-22
- Probe: EX3DV4 - SN7330; ConvF(10.43, 10.43, 10.43); Calibrated: 2018-01-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM (20deg probe tilt) with CRP v5.0(Right); Type: QD000P40CD; Serial: TP:1846
RHS/Touch_QPSK RB 1/0 ch20525/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.168 W/kg
RHS/Touch_QPSK RB 1/0 ch20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 13.97 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 0.196 W/kg
SAR(1 g) = 0.156 W/kg; SAR(10 g) = 0.120 W/kg
Maximum value of SAR (measured) = 0.174 W/kg
0 dB = 0.174 W/kg = -7.59 dBW/kg
Plot No. 19
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-23
LTE Band 5
Frequency: 836.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.998 S/m; εr = 54.035; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1447; Calibrated: 2017-11-22
- Probe: EX3DV4 - SN7330; ConvF(10.09, 10.09, 10.09); Calibrated: 2018-01-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: ELI v6.0; Type: QDOVA003AA; Serial: TP:2005
Rear/QPSK RB 1/0_ch 20525/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.537 W/kg
Rear/QPSK RB 1/0_ch 20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 23.55 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.641 W/kg
SAR(1 g) = 0.467 W/kg; SAR(10 g) = 0.326 W/kg
Maximum value of SAR (measured) = 0.539 W/kg
0 dB = 0.539 W/kg = -2.68 dBW/kg
Plot No. 20
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-23
LTE Band 5
Frequency: 836.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.998 S/m; εr = 54.035; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1447; Calibrated: 2017-11-22
- Probe: EX3DV4 - SN7330; ConvF(10.09, 10.09, 10.09); Calibrated: 2018-01-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: ELI v6.0; Type: QDOVA003AA; Serial: TP:2005
Rear/QPSK RB 1/0_ch 20525/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.901 W/kg
Rear/QPSK RB 1/0_ch 20525/Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 30.45 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 1.54 W/kg
SAR(1 g) = 0.821 W/kg; SAR(10 g) = 0.443 W/kg
Maximum value of SAR (measured) = 1.03 W/kg
0 dB = 1.03 W/kg = 0.13 dBW/kg
Plot No. 21
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-01
LTE Band 12
Frequency: 707.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.854 S/m; εr = 42.809; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(10.55, 10.55, 10.55); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM Phantom CRP v5.0(Right); Type: QD000P40CD; Serial: TP:1855
RHS/Touch_QPSK RB 1/0 ch 23095/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.0602 W/kg
RHS/Touch_QPSK RB 1/0 ch 23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 8.410 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 0.0660 W/kg
SAR(1 g) = 0.055 W/kg; SAR(10 g) = 0.044 W/kg
Maximum value of SAR (measured) = 0.0604 W/kg
0 dB = 0.0604 W/kg = -12.19 dBW/kg
Plot No. 22
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-02
LTE Band 12
Frequency: 707.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.931 S/m; εr = 57.75; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(10.43, 10.43, 10.43); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/0 ch 23095/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.153 W/kg
Rear/QPSK RB 1/0 ch 23095/Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 13.06 V/m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 0.180 W/kg
SAR(1 g) = 0.135 W/kg; SAR(10 g) = 0.102 W/kg
Maximum value of SAR (measured) = 0.154 W/kg
0 dB = 0.154 W/kg = -8.12 dBW/kg
Plot No. 23
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-02
LTE Band 12
Frequency: 707.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.931 S/m; εr = 57.75; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(10.43, 10.43, 10.43); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/0 ch 23095/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.225 W/kg
Rear/QPSK RB 1/0 ch 23095/Zoom Scan (7x8x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 15.25 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 0.329 W/kg
SAR(1 g) = 0.193 W/kg; SAR(10 g) = 0.142 W/kg
Maximum value of SAR (measured) = 0.240 W/kg
0 dB = 0.240 W/kg = -6.20 dBW/kg
Plot No. 24
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-01
LTE Band 13
Frequency: 782 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 782 MHz; σ = 0.923 S/m; εr = 41.787; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(10.55, 10.55, 10.55); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM Phantom CRP v5.0(Right); Type: QD000P40CD; Serial: TP:1855
RHS/Touch_QPSK RB 1/0 ch 23230/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.0871 W/kg
RHS/Touch_QPSK RB 1/0 ch 23230/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 9.746 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.0960 W/kg
SAR(1 g) = 0.078 W/kg; SAR(10 g) = 0.061 W/kg
Maximum value of SAR (measured) = 0.0867 W/kg
0 dB = 0.0867 W/kg = -10.62 dBW/kg
Plot No. 25
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-02
LTE Band 13
Frequency: 782 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 782 MHz; σ = 0.999 S/m; εr = 57.06; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(10.43, 10.43, 10.43); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/0 ch 23230/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.224 W/kg
Rear/QPSK RB 1/0 ch 23230/Zoom Scan (5x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 15.14 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.253 W/kg
SAR(1 g) = 0.202 W/kg; SAR(10 g) = 0.156 W/kg
Maximum value of SAR (measured) = 0.226 W/kg
0 dB = 0.226 W/kg = -6.46 dBW/kg
Plot No. 26
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-02
LTE Band 13
Frequency: 782 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 782 MHz; σ = 0.999 S/m; εr = 57.06; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(10.43, 10.43, 10.43); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/0 ch 23230/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.300 W/kg
Rear/QPSK RB 1/0 ch 23230/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 17.53 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 0.429 W/kg
SAR(1 g) = 0.222 W/kg; SAR(10 g) = 0.124 W/kg
Maximum value of SAR (measured) = 0.296 W/kg
0 dB = 0.296 W/kg = -5.29 dBW/kg
Plot No. 27
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-24
LTE Band 41
Frequency: 2680 MHz; Duty Cycle: 1:1.59956;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 2680 MHz; σ = 2.002 S/m; εr = 38.667; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(7.35, 7.35, 7.35); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM (20deg probe tilt) with CRP v5.0_Front; Type: QD000P40CD; Serial: TP:1877
RHS/Touch_QPSK RB 1/49 ch41490/Area Scan (9x15x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 0.0567 W/kg
RHS/Touch_QPSK RB 1/49 ch41490/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 5.903 V/m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 0.0970 W/kg
SAR(1 g) = 0.045 W/kg; SAR(10 g) = 0.023 W/kg
Maximum value of SAR (measured) = 0.0623 W/kg
0 dB = 0.0623 W/kg = -12.06 dBW/kg
Plot No. 28
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-23
LTE Band 41
Frequency: 2680 MHz; Duty Cycle: 1:1.59956;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 2680 MHz; σ = 2.225 S/m; εr = 52.727; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(7.4, 7.4, 7.4); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/49 ch 41490/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 0.408 W/kg
Rear/QPSK RB 1/49 ch 41490/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 13.71 V/m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 0.621 W/kg
SAR(1 g) = 0.319 W/kg; SAR(10 g) = 0.157 W/kg
Maximum value of SAR (measured) = 0.435 W/kg
0 dB = 0.435 W/kg = -3.62 dBW/kg
Plot No. 29
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-02-24
LTE Band 41
Frequency: 2636.5 MHz; Duty Cycle: 1:1.59956;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 2636.5 MHz; σ = 2.219 S/m; εr = 52.68; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(7.4, 7.4, 7.4); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Edge 3/QPSK RB 1/49 ch 41055/Area Scan (6x10x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 0.990 W/kg
Edge 3/QPSK RB 1/49 ch 41055/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 21.65 V/m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 1.72 W/kg
SAR(1 g) = 0.844 W/kg; SAR(10 g) = 0.386 W/kg
Maximum value of SAR (measured) = 1.18 W/kg
0 dB = 1.18 W/kg = 0.72 dBW/kg
Plot No. 30
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-03
LTE Band 66
Frequency: 1720 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1720 MHz; σ = 1.327 S/m; εr = 38.769; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(8.65, 8.65, 8.65); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM Phantom CRP v5.0(Middle); Type: QD000P40CD; Serial: TP:1854
RHS/Touch_QPSK RB 1/0 ch 132072/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.120 W/kg
RHS/Touch_QPSK RB 1/0 ch 132072/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 9.527 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.162 W/kg
SAR(1 g) = 0.108 W/kg; SAR(10 g) = 0.069 W/kg
Maximum value of SAR (measured) = 0.129 W/kg
0 dB = 0.129 W/kg = -8.89 dBW/kg
Plot No. 31
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-06
LTE Band 66
Frequency: 1720 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1720 MHz; σ = 1.411 S/m; εr = 54.431; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.41, 8.41, 8.41); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/0 Ch 132072/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.515 W/kg
Rear/QPSK RB 1/0 Ch 132072/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 20.52 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 0.735 W/kg
SAR(1 g) = 0.471 W/kg; SAR(10 g) = 0.279 W/kg
Maximum value of SAR (measured) = 0.583 W/kg
0 dB = 0.583 W/kg = -2.34 dBW/kg
Plot No. 32
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-29
LTE Band 66
Frequency: 1770 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 1770 MHz; σ = 1.447 S/m; εr = 51.199; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(8.41, 8.41, 8.41); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/QPSK RB 1/0 Ch 132572/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.825 W/kg
Rear/QPSK RB 1/0 Ch 132572/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm
Reference Value = 27.46 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 1.38 W/kg
SAR(1 g) = 0.816 W/kg; SAR(10 g) = 0.440 W/kg
Maximum value of SAR (measured) = 1.08 W/kg
0 dB = 1.08 W/kg = 0.33 dBW/kg
Plot No. 33
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-12
Wi-Fi 2.4 GHz
Frequency: 2462 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 2462 MHz; σ = 1.785 S/m; εr = 37.786; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(7.56, 7.56, 7.56); Calibrated: 2017-08-22;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: SAM (20deg probe tilt) with CRP v5.0_Front; Type: QD000P40CD; Serial: TP:1877
RHS/Tilt_802.11 b mode ch 11/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 1.11 W/kg
RHS/Tilt_802.11 b mode ch 11/Zoom Scan (9x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 27.04 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 2.30 W/kg
SAR(1 g) = 0.895 W/kg; SAR(10 g) = 0.382 W/kg
Maximum value of SAR (measured) = 1.29 W/kg
0 dB = 1.29 W/kg = 1.11 dBW/kg
Plot No. 34
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-13
Wi-Fi 2.4 GHz
Frequency: 2462 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 2462 MHz; σ = 2.022 S/m; εr = 50.929; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(7.59, 7.59, 7.59); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Rear/802.11b_ch 11/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 0.164 W/kg
Rear/802.11b_ch 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 9.774 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.246 W/kg
SAR(1 g) = 0.134 W/kg; SAR(10 g) = 0.073 W/kg
Maximum value of SAR (measured) = 0.176 W/kg
0 dB = 0.176 W/kg = -7.54 dBW/kg
Plot No. 35
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-13
Wi-Fi 2.4 GHz
Frequency: 2462 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used (interpolated): f = 2462 MHz; σ = 2.022 S/m; εr = 50.929; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(7.59, 7.59, 7.59); Calibrated: 2017-09-28;
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Edge 1/802.11b_ch 11/Area Scan (6x11x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 0.337 W/kg
Edge 1/802.11b_ch 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 14.45 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 0.537 W/kg
SAR(1 g) = 0.277 W/kg; SAR(10 g) = 0.139 W/kg
Maximum value of SAR (measured) = 0.380 W/kg
0 dB = 0.380 W/kg = -4.20 dBW/kg
Plot No. 36
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-24
Wi-Fi 5.3 GHz
Frequency: 5270 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 5270 MHz; σ = 4.591 S/m; εr = 37.268; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(5.19, 5.19, 5.19); Calibrated: 2017-08-22;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: SAM (20deg probe tilt) with CRP v5.0_Back; Type: QD000P40CD; Serial: TP:1882
RHS/Touch_802.11n_HT 40_ch 54/Area Scan (10x18x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.572 W/kg
RHS/Touch_802.11n_HT 40_ch 54/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=1.4mm
Reference Value = 11.61 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 0.990 W/kg
SAR(1 g) = 0.202 W/kg; SAR(10 g) = 0.0538 W/kg
Maximum value of SAR (measured) = 0.538 W/kg
0 dB = 0.538 W/kg = -2.69 dBW/kg
Plot No. 37
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-28
Wi-Fi 5.3 GHz
Frequency: 5260 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 5260 MHz; σ = 5.44 S/m; εr = 48.986; ρ = 1000 kg/m 3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(4.85, 4.85, 4.85); Calibrated: 2017-09-28;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Front/802.11 a mode ch 52/Area Scan (19x11x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.0743 W/kg
Front/802.11 a mode ch 52/Zoom Scan (9x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=1.4mm
Reference Value = 4.318 V/m; Power Drift = -0.09 dB
Peak SAR (extrapolated) = 0.143 W/kg
SAR(1 g) = 0.034 W/kg; SAR(10 g) = 0.013 W/kg
Maximum value of SAR (measured) = 0.0834 W/kg
0 dB = 0.0834 W/kg = -10.79 dBW/kg
Plot No. 38
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-24
Wi-Fi 5.6 GHz
Frequency: 5510 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 5510 MHz; σ = 4.835 S/m; εr = 36.913; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(4.82, 4.82, 4.82); Calibrated: 2017-08-22;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: SAM (20deg probe tilt) with CRP v5.0_Back; Type: QD000P40CD; Serial: TP:1882
RHS/Touch_802.11n_HT 40_ch 102/Area Scan (10x18x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 1.12 W/kg
RHS/Touch_802.11n_HT 40_ch 102/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=1.4mm
Reference Value = 15.34 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 1.87 W/kg
SAR(1 g) = 0.388 W/kg; SAR(10 g) = 0.101 W/kg
Maximum value of SAR (measured) = 1.06 W/kg
0 dB = 1.06 W/kg = 0.25 dBW/kg
Plot No. 39
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-28
Wi-Fi 5.6 GHz
Frequency: 5500 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 5500 MHz; σ = 5.757 S/m; εr = 48.591; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(4.08, 4.08, 4.08); Calibrated: 2017-09-28;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Front/802.11 a mode ch 100/Area Scan (19x11x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.150 W/kg
Front/802.11 a mode ch 100/Zoom Scan (9x9x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=1.4mm
Reference Value = 5.863 V/m; Power Drift = -0.15 dB
Peak SAR (extrapolated) = 0.309 W/kg
SAR(1 g) = 0.064 W/kg; SAR(10 g) = 0.023 W/kg
Maximum value of SAR (measured) = 0.161 W/kg
0 dB = 0.161 W/kg = -7.93 dBW/kg
Plot No. 40
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-24
Wi-Fi 5.8 GHz
Frequency: 5795 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 5795 MHz; σ = 5.148 S/m; εr = 36.51; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1468; Calibrated: 2017-08-22
- Probe: EX3DV4 - SN7376; ConvF(4.69, 4.69, 4.69); Calibrated: 2017-08-22;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: SAM (20deg probe tilt) with CRP v5.0_Back; Type: QD000P40CD; Serial: TP:1882
RHS/Tilt_802.11n_HT 40_ch 159/Area Scan (12x19x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.938 W/kg
RHS/Tilt_802.11n_HT 40_ch 159/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=1.4mm
Reference Value = 11.12 V/m; Power Drift = 0.17 dB
Peak SAR (extrapolated) = 2.36 W/kg
SAR(1 g) = 0.483 W/kg; SAR(10 g) = 0.129 W/kg
Maximum value of SAR (measured) = 1.24 W/kg
0 dB = 1.24 W/kg = 0.93 dBW/kg
Plot No. 41
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-28
Wi-Fi 5.8 GHz
Frequency: 5745 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 5745 MHz; σ = 6.101 S/m; εr = 48.199; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(4.51, 4.51, 4.51); Calibrated: 2017-09-28;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Front/802.11 a mode ch 149/Area Scan (19x11x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.163 W/kg
Front/802.11 a mode ch 149/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=1.4mm
Reference Value = 5.845 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.334 W/kg
SAR(1 g) = 0.072 W/kg; SAR(10 g) = 0.026 W/kg
Maximum value of SAR (measured) = 0.177 W/kg
0 dB = 0.177 W/kg = -7.52 dBW/kg
Plot No. 42
Test Laboratory: UL Korea, Ltd. Suwon Laboratory
Date: 2018-03-28
Wi-Fi 5.8 GHz
Frequency: 5745 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C
Medium parameters used: f = 5745 MHz; σ = 6.101 S/m; εr = 48.199; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1494; Calibrated: 2017-07-20
- Probe: EX3DV4 - SN7314; ConvF(4.51, 4.51, 4.51); Calibrated: 2017-09-28;
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1166
Front/802.11 a mode ch 149/Area Scan (19x11x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.291 W/kg
Front/802.11 a mode ch 149/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=1.4mm
Reference Value = 7.642 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 0.610 W/kg
SAR(1 g) = 0.128 W/kg; SAR(10 g) = 0.041 W/kg
Maximum value of SAR (measured) = 0.324 W/kg
0 dB = 0.324 W/kg = -4.89 dBW/kg
Plot No. 43
Download: SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Mirror Download [FCC.gov]SMA600GN GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n and ANT+ and NFC RF Exposure Info Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM Samsung Electronics Co Ltd
Document ID3810289
Application ID9XyH1FkkKhTbbQ2ML49u6w==
Document Description4788371667-S1V2 FCC Report SAR App B_Highest SAR Test Plots
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize187.05kB (2338107 bits)
Date Submitted2018-04-09 00:00:00
Date Available2018-04-10 00:00:00
Creation Date2018-04-03 20:26:03
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2018-04-03 22:51:55
Document TitleDate/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM
Document CreatorMicrosoft® Word 2013
Document Author: John

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : John
Create Date                     : 2018:04:03 20:26:03+09:00
Modify Date                     : 2018:04:03 22:51:55+09:00
Language                        : ko-KR
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : John
Title                           : Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM
Creator Tool                    : Microsoft® Word 2013
Metadata Date                   : 2018:04:03 22:51:55+09:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:8a9c2e8e-bc50-4435-a076-1684771229a1
Instance ID                     : uuid:eea51bd2-adc1-4d14-9240-cd88f0bed235
Page Count                      : 43