EAP1300 Dual Band Indoor Access Point Test Report (NII)_rev EnGenius Technologies

EnGenius Technologies Dual Band Indoor Access Point

FCC ID Filing: A8J-EAP1300
Purchase on Amazon: Dual Band Indoor Access Point

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of EAP1300 Dual Band Indoor Access Point Test Report (NII)_rev EnGenius Technologies

FCC Test Report
Report No.: RF170307C24-1
FCC ID: A8J-EAP1300
Test Model: EAP1300, EAP1300EXT (refer to item 3.1 for more details)
Received Date: Feb. 17, 2017
Test Date: Feb. 17 ~ Apr. 18, 2017
Issued Date: Apr. 20, 2017
Applicant: EnGenius Technologies
Address: 1580 Scenic Avenue, Costa Mesa, CA92626
Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan
(R.O.C.)
Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City
33383, TAIWAN (R.O.C.)
This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification.
The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.
Report No.: RF170307C24-1
Page No. 1 / 99
Report Format Version:6.1.1
Table of Contents
Release Control Record .................................................................................................................................. 4
Certificate of Conformity...................................................................................................................... 5
Summary of Test Results ..................................................................................................................... 6
2.1
2.2
Measurement Uncertainty ................................................................................................................... 6
Modification Record ............................................................................................................................ 6
General Information .............................................................................................................................. 7
3.1
3.2
3.2.1
3.3
3.4
3.4.1
3.5
General Description of EUT ................................................................................................................ 7
Description of Test Modes ................................................................................................................. 10
Test Mode Applicability and Tested Channel Detail............................................................................ 11
Duty Cycle of Test Signal .................................................................................................................. 13
Description of Support Units ............................................................................................................. 14
Configuration of System under Test .................................................................................................. 14
General Description of Applied Standards ........................................................................................ 14
Test Types and Results ...................................................................................................................... 16
4.1
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
4.1.6
4.1.7
4.2
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
4.2.7
4.3
4.3.1
4.3.2
4.3.3
4.3.4
4.3.5
4.3.6
4.3.7
4.4
4.4.1
4.4.2
4.4.3
4.4.4
4.5
4.5.1
4.5.2
4.5.3
4.5.4
4.5.5
4.5.6
4.5.7
4.6
4.6.1
Radiated Emission and Bandedge Measurement............................................................................. 16
Limits of Radiated Emission and Bandedge Measurement .............................................................. 16
Test Instruments ................................................................................................................................ 17
Test Procedures................................................................................................................................. 18
Deviation from Test Standard ............................................................................................................ 18
Test Setup .......................................................................................................................................... 19
EUT Operating Conditions................................................................................................................. 20
Test Results ....................................................................................................................................... 21
Conducted Emission Measurement .................................................................................................. 61
Limits of Conducted Emission Measurement .................................................................................... 61
Test Instruments ................................................................................................................................ 61
Test Procedures................................................................................................................................. 62
Deviation from Test Standard ............................................................................................................ 62
Test Setup .......................................................................................................................................... 62
EUT Operating Conditions................................................................................................................. 62
Test Results ....................................................................................................................................... 63
Transmit Power Measurement .......................................................................................................... 71
Limits of Transmit Power Measurement ............................................................................................ 71
Test Setup .......................................................................................................................................... 71
Test Instruments ................................................................................................................................ 72
Test Procedure .................................................................................................................................. 72
Deviation fromTest Standard ............................................................................................................. 72
EUT Operating Conditions................................................................................................................. 72
Test Result ......................................................................................................................................... 73
Occupied Bandwidth Measurement .................................................................................................. 77
Test Setup .......................................................................................................................................... 77
Test Instruments ................................................................................................................................ 77
Test Procedure .................................................................................................................................. 77
Test Result ......................................................................................................................................... 78
Peak Power Spectral Density Measurement .................................................................................... 80
Limits of Peak Power Spectral Density Measurement ...................................................................... 80
Test Setup .......................................................................................................................................... 80
Test Instruments ................................................................................................................................ 80
Test Procedures................................................................................................................................. 81
Deviation from Test Standard ............................................................................................................ 81
EUT Operating Conditions................................................................................................................. 81
Test Results ....................................................................................................................................... 82
Frequency Stability ............................................................................................................................ 87
Limits of Frequency Stability Measurement ...................................................................................... 87
Report No.: RF170307C24-1
Page No. 2 / 99
Report Format Version:6.1.1
4.6.2
4.6.3
4.6.4
4.6.5
4.6.6
4.7
4.7.1
4.7.2
4.7.3
4.7.4
4.7.5
4.7.6
4.7.7
Test Setup .......................................................................................................................................... 87
Test Procedure .................................................................................................................................. 87
Deviation from Test Standard ............................................................................................................ 87
EUT Operating Condition .................................................................................................................. 87
Test Results ....................................................................................................................................... 88
6dB Bandwidth Measurement ........................................................................................................... 89
Limits of 6dB Bandwidth Measurement ............................................................................................. 89
Test Setup .......................................................................................................................................... 89
Test Instruments ................................................................................................................................ 89
Test Procedure .................................................................................................................................. 89
Deviation from Test Standard ............................................................................................................ 89
EUT Operating Condition .................................................................................................................. 89
Test Results ....................................................................................................................................... 90
Pictures of Test Arrangements .......................................................................................................... 92
Annex A- Radiated Out of Band Emission (OOBE) Measurement (For U-NII-3 band) ............................ 93
Appendix – Information on the Testing Laboratories ................................................................................ 99
Report No.: RF170307C24-1
Page No. 3 / 99
Report Format Version:6.1.1
Release Control Record
Issue No.
Description
Date Issued
RF170307C24-1
Original release
Apr. 20, 2017
Report No.: RF170307C24-1
Page No. 4 / 99
Report Format Version:6.1.1
1
Certificate of Conformity
Product: Dual Band Indoor Access Point
Brand: EnGenius
Test Model: EAP1300, EAP1300EXT (refer to item 3.1 for more details)
Sample Status: Engineering sample
Applicant: EnGenius Technologies
Test Date: Feb. 17 ~ Apr. 18, 2017
Standards: 47 CFR FCC Part 15, Subpart E (Section 15.407)
ANSI C63.10:2013
The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s EMC characteristics under the conditions specified in this report.
Prepared by :
, Date:
Apr. 20, 2017
, Date:
Apr. 20, 2017
Suntee Liu / Specialist
Approved by :
Ken Liu / Senior Manager
Report No.: RF170307C24-1
Page No. 5 / 99
Report Format Version:6.1.1
2
Summary of Test Results
47 CFR FCC Part 15, Subpart E (Section 15.407)
FCC
Clause
Test Item
Result
15.407(b)(6)
AC Power Conducted Emissions
Pass
Radiated Emissions & Band
Edge Measurement
Pass
Max Average Transmit Power
Pass
15.407(b)
(1/2/3/4(i/ii)/6)
15.407(a)(1/2/3)
--15.407(a)(1/2/3)
Occupied Bandwidth
Measurement
Remarks
Meet the requirement of limit.
Minimum passing margin is -8.88dB at
0.48203MHz.
Meet the requirement of limit.
Minimum passing margin is -1.0dB at
5150.00MHz.
Meet the requirement of limit.
Reference only.
Peak Power Spectral Density
Pass
Meet the requirement of limit.
15.407(e)
6dB bandwidth
Pass
Meet the requirement of limit.
(U-NII-3 Band only)
15.407(g)
Frequency Stability
Pass
Meet the requirement of limit.
Internal antenna:
Antenna connector is IPEX for PIFA
antenna not a standard connector.
15.203
Antenna Requirement
Pass
External antenna:
Antenna connector is RSMA for dipole
antenna not a standard connector.
*For U-NII-3 band compliance with rule part 15.407(b)(4)(i), the OOBE test plots were recorded in Annex A.
2.1
Measurement Uncertainty
Where relevant, the following measurement uncertainty levels have been estimated for tests performed on
the EUT as specified in CISPR 16-4-2:
Measurement
Frequency
Conducted Emissions at mains ports
150kHz ~ 30MHz
30MHz ~ 200MHz
200MHz ~1000MHz
1GHz ~ 18GHz
18GHz ~ 40GHz
Radiated Emissions up to 1 GHz
Radiated Emissions above 1 GHz
2.2
Expanded Uncertainty
(k=2) (±)
2.94 dB
3.86 dB
3.87 dB
2.29 dB
2.29 dB
Modification Record
There were no modifications required for compliance.
Report No.: RF170307C24-1
Page No. 6 / 99
Report Format Version:6.1.1
3
3.1
General Information
General Description of EUT
Product
Dual Band Indoor Access Point
Brand
EnGenius
Test Model
EAP1300, EAP1300EXT
Model Difference
Refer to Note
Sample Status
Engineering sample
Power Supply Rating
12Vdc (adapter)
54Vdc (POE)
Modulation Type
256QAM, 64QAM, 16QAM, QPSK, BPSK
Modulation Technology
OFDM
Transfer Rate
802.11a: 54/48/36/24/18/12/9/6Mbps
802.11n: up to 300Mbps
802.11ac: up to 867Mbps
Operating Frequency
5180~5240MHz, 5745~5825MHz
Number of Channel
5180~5240MHz:
802.11a, 802.11n (HT20), 802.11ac (VHT20): 4
802.11n (HT40), 802.11ac (VHT40): 2
802.11ac (VHT80): 1
5745~5825MHz:
802.11a, 802.11n (HT20), 802.11ac (VHT20): 5
802.11n (HT40), 802.11ac (VHT40): 2
802.11ac (VHT80): 1
Output Power
CDD Mode:
5180~5240MHz: 272.937mW
5745~5825MHz: 319.544mW
Beamforming Mode:
5180~5240MHz: 118.277mW
5745~5825MHz: 159.783mW
Antenna Type
Refer to Note
Antenna Connector
Refer to Note
Accessory Device
Adapter
Cable Supplied
0.5m non-shielded RJ45 cable without core
Report No.: RF170307C24-1
Page No. 7 / 99
Report Format Version:6.1.1
Note:
1. The EUT incorporates a MIMO function. Physically, the EUT provides 2 completed transmitters and 2
receivers.
Modulation Mode
TX Function
Beamforming
802.11b
2TX
Not Support
802.11g
2TX
Not Support
802.11a
2TX
Not Support
802.11n (HT20)
2TX
Support
802.11n (HT40)
2TX
Support
802.11ac (VHT20)
2TX
Support
802.11ac (VHT40)
2TX
Support
802.11ac (VHT80)
2TX
Support
* The modulation and bandwidth are similar for 802.11n mode for HT20/HT40 and 802.11ac mode for
VHT20/VHT40, therefore investigated worst case to representative mode in test report. (Final test mode
refer section 3.2.1)
* For 802.11n and 802.11ac, CDD mode and Beamforming mode are presented in power output test item. For
other test items, CDD mode is the worst case for final tests after pretesting.
2. The EUT uses following antennas.
Internal antenna
Type
PIFA
Connecter
IPEX
Gain (dBi)
2.4GHz
5GHz
Frequency
Type
Connecter
Frequency (MHz)
2400
4.50
2460
5.67
5000
3.55
5550
4.85
5850
4.50
2410
4.67
2470
4.78
5100
3.70
5650
4.99
5900
4.33
External antenna
Dipole
RSMA
Gain (dBi)
2420
4.89
2480
4.78
5150
3.01
5725
4.86
5950
4.44
2430
4.63
2490
4.84
5250
3.32
5750
4.48
6000
4.56
2440
4.94
2500
4.81
5350
3.76
5800
4.46
2450
4.98
5450
4.31
5825
4.71
* The 2.4GHz max. gain (External antenna) is chosen for final tests since it has the maximum gain among all
antennas.
* The 5GHz max. gain (Internal antenna) is chosen for final tests since it has the maximum gain among all
antennas.
Report No.: RF170307C24-1
Page No. 8 / 99
Report Format Version:6.1.1
3. All models are listed as below.
Brand
Model
EAP1300
EnGenius
EAP1300EXT
Difference
Internal antenna
External antenna
4. The EUT uses following adapter.
Brand
DVE
Model
DSA-12PFT-12 FUS 120100
Input Power
100-240Vac, 50/60Hz, 0.5A
Output Power
+12Vdc, 1A
Power Line
1.45m DC cable without core attached on adapter
5. The EUT uses following POE (support unit).
Brand
SENAO
Model
EAP5006GP
Input Power
100-240Vac, 0.8A, 50-60Hz
Output Power
54Vdc, 0.6A
Power Line
0.5m non-shielded power cable without core
6. 2.4GHz and 5GHz technologies can transmit at same time.
7. Spurious emission of the simultaneous operation (2.4GHz and 5GHz) has been evaluated and no
non-compliance was found.
Report No.: RF170307C24-1
Page No. 9 / 99
Report Format Version:6.1.1
3.2
Description of Test Modes
For 5180 ~ 5240MHz
4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20):
Channel
Frequency
Channel
Frequency
36
5180 MHz
44
5220 MHz
40
5200 MHz
48
5240 MHz
2 channels are provided for 802.11n (HT40), 802.11ac (VHT40):
Channel
Frequency
Channel
Frequency
38
5190 MHz
46
5230 MHz
1 channel is provided for 802.11ac (VHT80):
Channel
Frequency
42
5210MHz
For 5745 ~ 5825MHz
5 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20):
Channel
Frequency
Channel
Frequency
149
5745MHz
161
5805MHz
153
5765MHz
165
5825MHz
157
5785MHz
2 channels are provided for 802.11n (HT40), 802.11ac (VHT40):
Channel
Frequency
Channel
Frequency
151
5755MHz
159
5795MHz
1 channel is provided for 802.11ac (VHT80):
Channel
Frequency
155
5775MHz
Report No.: RF170307C24-1
Page No. 10 / 99
Report Format Version:6.1.1
3.2.1
Test Mode Applicability and Tested Channel Detail
Applicable to
EUT Configure
Mode
RE1G
A1
A2
B1
B2
Where
RE<1G
PLC
APCM
√
√
√
√
√
√
√
√
√
√
√
RE1G: Radiated Emission above 1GHz & Bandedge
Description
Internal antenna, Adapter
Internal antenna, POE
External antenna, Adapter
External antenna, POE
RE<1G: Radiated Emission below 1GHz
Measurement
PLC: Power Line Conducted Emission
APCM: Antenna Port Conducted Measurement
Note:
1. The antenna had been pre-tested on the positioned of each 3 axis. The worst cases were found when positioned on Z-plane for
internal antenna and X-plane for external antenna.
2. “-” means no effect.
Radiated Emission Test (Above 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT Configure
Mode
Mode
Frequency Band
(MHz)
Available Channel
Tested Channel
Modulation
Technology
Data Rate (Mbps)
A1, B1
802.11a
36 to 48
36, 40, 48
OFDM
6.0
A1, B1
802.11n (HT20)
36 to 48
36, 40, 48
OFDM
7.2
A1, B1
802.11n (HT40)
38 to 46
38, 46
OFDM
15.0
A1, B1
802.11ac (VHT80)
42
42
OFDM
65.0
5180-5240
A1, B1
802.11a
149 to 165
149, 157, 165
OFDM
6.0
A1, B1
802.11n (HT20)
149 to 165
149, 157, 165
OFDM
7.2
A1, B1
802.11n (HT40)
151 to 159
151, 159
OFDM
15.0
A1, B1
802.11ac (VHT80)
155
155
OFDM
65.0
5745-5825
Radiated Emission Test (Below 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT Configure
Mode
A1, A2, B1,
B2
Mode
802.11a
Report No.: RF170307C24-1
Frequency Band
(MHz)
5745-5825
Available Channel
Tested Channel
149 to 165
157
Page No. 11 / 99
Modulation
Technology
OFDM
Data Rate (Mbps)
6.0
Report Format Version:6.1.1
Power Line Conducted Emission Test:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT Configure
Frequency Band
Mode
Mode
A1, A2, B1,
(MHz)
802.11a
B2
Available Channel
Tested Channel
149 to 165
157
5745-5825
Modulation
Technology
Data Rate (Mbps)
OFDM
6.0
Antenna Port Conducted Measurement:
This item includes all test value of each mode, but only includes spectrum plot of worst value of each
mode.
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT Configure
Frequency Band
Mode
Mode
(MHz)
Available Channel
Tested Channel
Modulation
Technology
Data Rate (Mbps)
A1
802.11a
36 to 48
36, 40, 48
OFDM
6.0
A1
802.11n (HT20)
36 to 48
36, 40, 48
OFDM
7.2
A1
802.11n (HT40)
38 to 46
38, 46
OFDM
15.0
A1
802.11ac (VHT80)
42
42
OFDM
65.0
A1
802.11a
149 to 165
149, 157, 165
OFDM
6.0
A1
802.11n (HT20)
149 to 165
149, 157, 165
OFDM
7.2
A1
802.11n (HT40)
151 to 159
151, 159
OFDM
15.0
A1
802.11ac (VHT80)
155
155
OFDM
65.0
5180-5240
5745-5825
Test Condition:
Applicable to
Environmental Conditions
Input Power
Tested by
James Yang
RE1G
20deg. C, 66%RH
120Vac, 60Hz
RE<1G
20deg. C, 66%RH
120Vac, 60Hz
PLC
25deg. C, 75%RH
120Vac, 60Hz
Chris Lin
APCM
25deg. C, 60%RH
120Vac, 60Hz
Antony Lee
Report No.: RF170307C24-1
Page No. 12 / 99
Jones Chang
James Yang
Report Format Version:6.1.1
3.3
Duty Cycle of Test Signal
Duty cycle of test signal is < 98%, duty factor shall be considered.
802.11a: Duty cycle = 2.025/2.175 = 0.931, Duty factor = 10 * log(1/0.931) = 0.31
802.11n (HT20): Duty cycle = 4.950/5.125 = 0.966, Duty factor = 10 * log(1/0.966) = 0.15
802.11n (HT40): Duty cycle = 2.325/2.588 = 0.898, Duty factor = 10 * log(1/0.898) = 0.47
802.11ac (VHT80): Duty cycle = 1.087/1.212 = 0.897, Duty factor = 10 * log(1/0.897) = 0.47
802.11a
802.11n (HT20)
802.11n (HT40)
Report No.: RF170307C24-1
802.11ac (VHT80)
Page No. 13 / 99
Report Format Version:6.1.1
3.4
Description of Support Units
The EUT has been tested as an independent unit together with other necessary accessories or support units.
The following support units or accessories were used to form a representative test configuration during the
tests.
ID
Product
Brand
Model No.
Serial No.
A.
PC
DELL
OptiPlex 9010 DT
HR465W1
B.
POE
SENAO
EAP5006GP
NA
FCC ID
Remarks
FCC DoC Approved NA
Provided by manufacturer
Note:
1. All power cords of the above support units are non-shielded (1.8m).
2. Item A acted as a communication partner to transfer data.
ID
Descriptions
Qty.
Length (m)
Shielding
(Yes/No)
Cores (Qty.)
Remarks
1.
RJ45, Cat5e
0.5
Accessory of EUT
2.
RJ45, Cat5e
3.4.1
Configuration of System under Test
Mode A1, B1
EUT
Adapter (EUT)
(1)
Notebook (A)
Report No.: RF170307C24-1
Page No. 14 / 99
Report Format Version:6.1.1
Mode A2, B2
EUT
(1)
POE (B)
3.5
(2)
Notebook (A)
General Description of Applied Standards
The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the
requirements of the following standards:
FCC Part 15, Subpart E (15.407)
KDB 789033 D02 General UNII Test Procedure New Rules v01r04
KDB 662911 D01 Multiple Transmitter Output v02r01
ANSI C63.10-2013
All test items have been performed and recorded as per the above standards.
Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC).
The test report has been issued separately.
Report No.: RF170307C24-1
Page No. 15 / 99
Report Format Version:6.1.1
4
Test Types and Results
4.1
Radiated Emission and Bandedge Measurement
4.1.1
Limits of Radiated Emission and Bandedge Measurement
Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified
as below table.
Frequencies
(MHz)
Field Strength
(microvolts/meter)
Measurement Distance
(meters)
0.009 ~ 0.490
2400/F(kHz)
300
0.490 ~ 1.705
24000/F(kHz)
30
1.705 ~ 30.0
30
30
30 ~ 88
100
88 ~ 216
150
216 ~ 960
200
Above 960
500
NOTE:
1.
The lower limit shall apply at the transition frequencies.
2.
Emission level (dBuV/m) = 20 log Emission level (uV/m).
3.
For frequencies above 1000MHz, the field strength limits are based on average detector, however, the
peak field strength of any emission shall not exceed the maximum permitted average limits, specified
above by more than 20dB under any condition of modulation.
Limits of unwanted emission out of the restricted bands
Applicable To
789033 D02 General UNII Test Procedure
New Rules v01r03
Frequency Band
Applicable To
5150~5250 MHz
15.407(b)(1)
5250~5350 MHz
15.407(b)(2)
5470~5725 MHz
15.407(b)(3)
Limit
Field Strength at 3m
PK:74 (dBµV/m)
EIRP Limit
PK: -27 (dBm/MHz)
AV:54 (dBµV/m)
Equivalent Field Strength at
3m
PK: 68.2(dBµV/m)
PK: 68.2(dBµV/m) *1
PK: -27 (dBm/MHz) *1
*2
PK: 105.2 (dBµV/m) *2
PK: 10 (dBm/MHz)
15.407(b)(4)(i)
*3
PK: 110.8(dBµV/m) *3
PK: 15.6 (dBm/MHz)
5725~5850 MHz
*4
PK: 122.2 (dBµV/m) *4
PK: 27 (dBm/MHz)
15.407(b)(4)(ii)
Emission limits in section 15.247(d)
*2
below the band edge increasing linearly to 10
*1
beyond 75 MHz or more above of the band edge.
dBm/MHz at 25 MHz above.
*3
below the band edge increasing linearly to a level *4 from 5 MHz above or below the band edge
of 15.6 dBm/MHz at 5 MHz above.
increasing linearly to a level of 27 dBm/MHz at
the band edge.
Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength:
E=
1000000 30 P
Report No.: RF170307C24-1
µV/m, where P is the eirp (Watts).
Page No. 16 / 99
Report Format Version:6.1.1
4.1.2
Test Instruments
Description &
Manufacturer
Test Receiver
ROHDE & SCHWARZ
Spectrum Analyzer
ROHDE & SCHWARZ
BILOG Antenna
SCHWARZBECK
HORN Antenna
SCHWARZBECK
HORN Antenna
SCHWARZBECK
Loop Antenna
Preamplifier
Agilent
Preamplifier
Agilent
RF signal cable
HUBER+SUHNER
RF signal cable
HUBER+SUHNER
Software
BV ADT
Antenna Tower
inn-co GmbH
Antenna Tower Controller
BV ADT
Turn Table
BV ADT
Turn Table Controller
BV ADT
26GHz ~ 40GHz Amplifier
High Speed Peak Power
Meter
Power Sensor
Model No.
Serial No.
Cal. Date
Cal. Due
ESIB7
100187
Apr. 18, 2016
Apr. 17, 2017
FSP40
100040
Aug. 16, 2016 Aug. 15, 2017
VULB9168
9168-171
Dec. 28, 2016 Dec. 27, 2017
9120D
209
Dec. 27, 2016 Dec. 26, 2017
BBHA 9170
BBHA9170241
Dec. 14, 2016 Dec. 13, 2017
EM-6879
269
Aug. 11, 2016 Aug. 10, 2017
8447D
2944A10738
Aug. 22, 2016 Aug. 21, 2017
8449B
3008A01964
Aug. 22, 2016 Aug. 21, 2017
SUCOFLEX 104
Cable-CH3-03 (214378)
Aug. 22, 2016 Aug. 21, 2017
SUCOFLEX 106
Cable-CH3-03
(309224+12738)
Aug. 22, 2016 Aug. 21, 2017
ADT_Radiated_
V7.6.15.9.4
NA
NA
NA
MA 4000
013303
NA
NA
AT100
AT93021702
NA
NA
TT100
TT93021702
NA
NA
SC100
SC93021702
NA
NA
EM26400
815221
Oct. 17, 2016
Oct. 16, 2017
ML2495A
0824011
Jul. 09, 2016
Jul. 08, 2017
MA2411B
0738171
Aug. 11, 2016 Aug. 10, 2017
Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable
to NML/ROC and NIST/USA.
2. The test was performed in HwaYa Chamber 3.
3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission
frequency above 1GHz if tested.
4. The FCC Site Registration No. is 988962.
5. The IC Site Registration No. is IC 7450F-3.
Report No.: RF170307C24-1
Page No. 17 / 99
Report Format Version:6.1.1
4.1.3
Test Procedures
For Radiated emission below 30MHz
a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber
room. The table was rotated 360 degrees to determine the position of the highest radiation.
b.
The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top
of a variable-height antenna tower.
c.
Both X and Y axes of the antenna are set to make the measurement.
d.
For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned
from 0 degrees to 360 degrees to find the maximum reading.
e.
The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with
Maximum Hold Mode.
Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency
below 30MHz.
For Radiated emission above 30MHz
a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above
1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to
determine the position of the highest radiation.
b.
The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top
of a variable-height antenna tower.
c.
The height of antenna is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to
make the measurement.
d.
For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned
to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to
find the maximum reading.
e.
The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum
hold mode when the test frequency is below 1 GHz.
f.
The test-receiver system was set to peak and average detect function and specified bandwidth with
maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets
average limit, measurement with the average detector is unnecessary.
Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for
Quasi-peak detection (QP) at frequency below 1GHz.
2.
The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz
for Peak detection (PK) at frequency above 1GHz.
3.
The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T
(Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz.
4.
All modes of operation were investigated and the worst-case emissions are reported.
4.1.4
Deviation from Test Standard
No deviation.
Report No.: RF170307C24-1
Page No. 18 / 99
Report Format Version:6.1.1
4.1.5
Test Setup
For Radiated emission below 30MHz
1m
EUT&
Support Units
3m
Turn Table
80cm
Ground Plane
Test Receiver
For Radiated emission 30MHz to 1GHz
EUT&
Support Units
Ant. Tower
1-4m
Variable
3m
10m
Turn Table
80cm
Ground Plane
Test Receiver
Report No.: RF170307C24-1
Page No. 19 / 99
Report Format Version:6.1.1
For Radiated emission above 1GHz
Ant. Tower
EUT&
Support Units
1-4m
Variable
3m
Turn Table
Absorber
150cm
Ground Plane
Test Receiver
For the actual test configuration, please refer to the attached file (Test Setup Photo).
4.1.6
EUT Operating Conditions
a. Placed the EUT on the testing table.
b. Prepared a PC to act as a communication partner and placed it outside of testing area.
c.
The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by
manufacturer) to enable EUT under transmission condition continuously at specific channel frequency.
d. The communication partner sent data to EUT by command "PING".
Report No.: RF170307C24-1
Page No. 20 / 99
Report Format Version:6.1.1
4.1.7
Test Results
Above 1GHz worst-Case Data:
Test Mode A1
802.11a
CHANNEL
TX Channel 36
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5180.00
*5180.00
#6906.00
#10360.00
#10360.00
73.0 PK
52.3 AV
116.1 PK
105.9 AV
63.7 PK
59.7 PK
46.3 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-1.0
-1.7
68.2
74.0
54.0
-4.5
-14.3
-7.7
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.43 H
2.43 H
2.71 H
2.71 H
1.56 H
1.62 H
1.62 H
297
297
300
300
288
28
28
72.2
51.5
77.4
67.2
56.7
47.0
33.6
0.8
0.8
38.7
38.7
7.0
12.7
12.7
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5180.00
*5180.00
#6906.00
#10360.00
#10360.00
59.2 PK
43.7 AV
111.7 PK
101.5 AV
60.3 PK
58.6 PK
44.7 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-14.8
-10.3
68.2
74.0
54.0
-7.9
-15.4
-9.3
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.76 V
1.76 V
3.09 V
3.09 V
1.99 V
1.89 V
1.89 V
298
298
321
321
353
254
254
58.4
42.9
73.0
62.8
53.3
45.9
32.0
0.8
0.8
38.7
38.7
7.0
12.7
12.7
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 21 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 40
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5200.00
*5200.00
#6933.20
#10400.00
#10400.00
70.7 PK
52.6 AV
120.0 PK
109.0 AV
62.9 PK
58.6 PK
45.1 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-3.3
-1.4
68.2
74.0
54.0
-5.3
-15.4
-8.9
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.83 H
2.83 H
1.01 H
1.01 H
1.62 H
1.86 H
1.86 H
41
41
46
46
294
324
324
69.9
51.8
81.3
70.3
55.7
45.9
32.4
0.8
0.8
38.7
38.7
7.2
12.7
12.7
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5200.00
*5200.00
#6933.20
#10400.00
#10400.00
64.2 PK
47.8 AV
114.2 PK
103.2 AV
59.3 PK
57.7 PK
44.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-9.8
-6.2
68.2
74.0
54.0
-8.9
-16.3
-9.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.51 V
1.51 V
1.49 V
1.49 V
1.98 V
1.69 V
1.69 V
40
40
42
42
192
192
63.4
47.0
75.5
64.5
52.1
45.0
32.2
0.8
0.8
38.7
38.7
7.2
12.7
12.7
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 22 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 48
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
*5240.00
*5240.00
5350.00
5350.00
#6986.50
#10480.00
#10480.00
118.0 PK
108.3 AV
56.9 PK
44.1 AV
60.9 PK
58.8 PK
45.5 AV
LIMIT
(dBuV/m)
74.0
54.0
68.2
74.0
54.0
MARGIN
(dB)
-17.1
-9.9
-7.3
-15.2
-8.5
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.84 H
2.84 H
2.61 H
2.61 H
1.62 H
2.38 H
2.38 H
288
288
322
322
296
185
185
79.2
69.5
55.8
43.0
53.3
45.3
32.0
38.8
38.8
1.1
1.1
7.6
13.5
13.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
*5240.00
*5240.00
5350.00
5350.00
#6986.50
#10480.00
#10480.00
113.6 PK
103.0 AV
56.7 PK
43.2 AV
58.1 PK
59.1 PK
45.4 AV
LIMIT
(dBuV/m)
74.0
54.0
68.2
74.0
54.0
MARGIN
(dB)
-17.3
-10.8
-10.1
-14.9
-8.6
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.56 V
1.56 V
1.87 V
1.87 V
2.20 V
2.57 V
2.57 V
46
46
332
332
69
69
74.8
64.2
55.6
42.1
50.5
45.6
31.9
38.8
38.8
1.1
1.1
7.6
13.5
13.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 23 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 149
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5645.60
*5745.00
*5745.00
#5976.00
7660.00
7660.00
11490.00
11490.00
55.8 PK
114.8 PK
104.7 AV
56.8 PK
54.2 PK
43.7 AV
61.8 PK
50.2 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-12.4
68.2
74.0
54.0
74.0
54.0
-11.4
-19.8
-10.3
-12.2
-3.8
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.50 H
1.50 H
1.50 H
1.50 H
1.72 H
1.72 H
1.72 H
1.72 H
34
34
34
34
19
19
94
94
54.1
74.9
64.8
54.0
45.8
35.3
47.3
35.7
1.7
39.9
39.9
2.8
8.4
8.4
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5630.40
*5745.00
*5745.00
#5964.80
11490.00
11490.00
55.1 PK
113.0 PK
102.4 AV
56.1 PK
60.0 PK
47.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-13.1
68.2
74.0
54.0
-12.1
-14.0
-7.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.28 V
2.28 V
2.28 V
2.28 V
1.91 V
1.91 V
30
30
30
30
346
346
53.4
73.1
62.5
53.4
45.5
32.5
1.7
39.9
39.9
2.7
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 24 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 157
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5634.40
*5785.00
*5785.00
#5982.40
11570.00
11570.00
59.8 PK
115.5 PK
105.8 AV
58.1 PK
62.4 PK
49.3 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-8.4
68.2
74.0
54.0
-10.1
-11.6
-4.7
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.73 H
2.73 H
2.73 H
2.73 H
1.75 H
1.75 H
359
359
359
359
94
94
58.1
75.4
65.7
55.3
48.1
35.0
1.7
40.1
40.1
2.8
14.3
14.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5640.00
*5785.00
*5785.00
#5979.20
11570.00
11570.00
56.2 PK
112.8 PK
102.7 AV
57.6 PK
60.5 PK
47.3 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-12.0
68.2
74.0
54.0
-10.6
-13.5
-6.7
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.85 V
1.85 V
1.85 V
1.85 V
1.96 V
1.96 V
290
290
54.5
72.7
62.6
54.8
46.2
33.0
1.7
40.1
40.1
2.8
14.3
14.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
Report No.: RF170307C24-1
Page No. 25 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 165
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5615.20
*5825.00
*5825.00
#5991.20
11650.00
11650.00
55.8 PK
115.9 PK
105.4 AV
57.9 PK
61.5 PK
48.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-12.4
68.2
74.0
54.0
-10.3
-12.5
-5.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.70 H
2.70 H
2.70 H
2.70 H
1.78 H
1.78 H
359
359
359
359
93
93
54.1
75.7
65.2
55.1
47.1
34.5
1.7
40.2
40.2
2.8
14.4
14.4
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5613.60
*5825.00
*5825.00
#5976.80
11650.00
11650.00
55.6 PK
114.7 PK
104.7 AV
58.2 PK
59.7 PK
47.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-12.6
68.2
74.0
54.0
-10.0
-14.3
-7.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.73 V
1.73 V
1.73 V
1.73 V
2.75 V
2.75 V
212
212
53.9
74.5
64.5
55.4
45.3
32.6
1.7
40.2
40.2
2.8
14.4
14.4
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 26 / 99
Report Format Version:6.1.1
802.11n (HT20)
CHANNEL
TX Channel 36
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5180.00
*5180.00
#6906.00
#10360.00
#10360.00
69.5 PK
52.2 AV
111.4 PK
100.7 AV
60.5 PK
59.5 PK
46.7 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-4.5
-1.8
68.2
74.0
54.0
-7.7
-14.5
-7.3
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.55 H
3.55 H
2.70 H
2.70 H
1.74 H
1.77 H
1.77 H
304
304
284
284
312
30
30
68.7
51.4
72.7
62.0
53.5
46.8
34.0
0.8
0.8
38.7
38.7
7.0
12.7
12.7
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5180.00
*5180.00
#6906.00
#10360.00
#10360.00
69.6 PK
51.7 AV
110.6 PK
100.3 AV
61.2 PK
59.5 PK
45.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-4.4
-2.3
68.2
74.0
54.0
-7.0
-14.5
-9.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.26 V
3.26 V
2.92 V
2.92 V
2.51 V
2.60 V
2.60 V
306
50
50
68.8
50.9
71.9
61.6
54.2
46.8
32.3
0.8
0.8
38.7
38.7
7.0
12.7
12.7
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 27 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 40
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5200.00
*5200.00
#6933.00
#10400.00
#10400.00
15600.00
15600.00
69.6 PK
52.2 AV
116.9 PK
106.0 AV
59.1 PK
58.1 PK
44.8 AV
63.5 PK
50.5 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-4.4
-1.8
68.2
74.0
54.0
74.0
54.0
-9.1
-15.9
-9.2
-10.5
-3.5
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.80 H
3.80 H
3.40 H
3.40 H
1.22 H
2.03 H
2.03 H
3.50 H
3.50 H
14
14
300
300
18
331
331
302
302
68.8
51.4
78.2
67.3
51.9
45.4
32.1
49.0
36.0
0.8
0.8
38.7
38.7
7.2
12.7
12.7
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5200.00
*5200.00
#6933.00
#10400.00
#10400.00
15600.00
15600.00
70.0 PK
51.4 AV
116.0 PK
105.9 AV
56.1 PK
57.0 PK
44.0 AV
64.9 PK
52.2 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-4.0
-2.6
68.2
74.0
54.0
74.0
54.0
-12.1
-17.0
-10.0
-9.1
-1.8
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.24 V
3.24 V
3.05 V
3.05 V
2.50 V
2.50 V
2.50 V
2.40 V
2.40 V
330
40
40
144
144
69.2
50.6
77.3
67.2
48.9
44.3
31.3
50.4
37.7
0.8
0.8
38.7
38.7
7.2
12.7
12.7
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 28 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 48
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
*5240.00
*5240.00
5350.00
5350.00
#6986.50
#10480.00
#10480.00
15720.00
15720.00
117.9 PK
106.6 AV
56.3 PK
44.5 AV
57.2 PK
57.3 PK
45.1 AV
63.4 PK
50.4 AV
LIMIT
(dBuV/m)
74.0
54.0
68.2
74.0
54.0
74.0
54.0
MARGIN
(dB)
-17.7
-9.5
-11.0
-16.7
-8.9
-10.6
-3.6
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.90 H
3.90 H
2.58 H
2.58 H
1.24 H
1.77 H
1.77 H
3.56 H
3.56 H
296
296
292
292
15
277
277
343
343
79.1
67.8
55.2
43.4
49.6
43.8
31.6
49.5
36.5
38.8
38.8
1.1
1.1
7.6
13.5
13.5
13.9
13.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
*5240.00
*5240.00
5350.00
5350.00
#6986.50
#10480.00
#10480.00
15720.00
15720.00
117.1 PK
106.2 AV
55.6 PK
33.6 AV
57.0 PK
58.3 PK
45.1 AV
65.2 PK
52.1 AV
LIMIT
(dBuV/m)
74.0
54.0
68.2
74.0
54.0
74.0
54.0
MARGIN
(dB)
-18.4
-20.4
-11.2
-15.7
-8.9
-8.8
-1.9
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.03 V
3.03 V
3.04 V
3.04 V
2.52 V
2.57 V
2.57 V
2.37 V
2.37 V
356
356
273
273
326
38
38
135
135
78.3
67.4
54.5
32.5
49.4
44.8
31.6
51.3
38.2
38.8
38.8
1.1
1.1
7.6
13.5
13.5
13.9
13.9
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 29 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 149
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5617.60
*5745.00
*5745.00
#5992.80
7660.00
7660.00
11490.00
11490.00
56.5 PK
119.0 PK
108.5 AV
57.6 PK
56.7 PK
45.2 AV
58.8 PK
46.1 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.7
68.2
74.0
54.0
74.0
54.0
-10.6
-17.3
-8.8
-15.2
-7.9
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.11 H
2.11 H
2.11 H
2.11 H
1.62 H
1.62 H
2.03 H
2.03 H
285
285
285
285
13
13
324
324
54.8
79.1
68.6
54.8
48.3
36.8
44.3
31.6
1.7
39.9
39.9
2.8
8.4
8.4
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5636.00
*5745.00
*5745.00
#5960.00
11490.00
11490.00
57.0 PK
114.1 PK
103.5 AV
57.2 PK
59.9 PK
47.6 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.2
68.2
74.0
54.0
-11.0
-14.1
-6.4
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.90 V
1.90 V
1.90 V
1.90 V
2.23 V
2.23 V
55
55
55.3
74.2
63.6
54.6
45.4
33.1
1.7
39.9
39.9
2.6
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 30 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 157
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5644.80
*5785.00
*5785.00
#5954.40
11570.00
11570.00
57.0 PK
120.2 PK
110.3 AV
58.4 PK
60.7 PK
47.1 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.2
68.2
74.0
54.0
-9.8
-13.3
-6.9
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.10 H
2.10 H
2.10 H
2.10 H
1.66 H
1.66 H
285
285
285
285
182
182
55.3
80.1
70.2
55.8
46.4
32.8
1.7
40.1
40.1
2.6
14.3
14.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5636.80
*5785.00
*5785.00
#5983.20
11570.00
11570.00
56.9 PK
114.6 PK
103.9 AV
58.5 PK
60.1 PK
47.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.3
68.2
74.0
54.0
-9.7
-13.9
-6.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.91 V
1.91 V
1.91 V
1.91 V
2.20 V
2.20 V
50
50
55.2
74.5
63.8
55.7
45.8
33.5
1.7
40.1
40.1
2.8
14.3
14.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
Report No.: RF170307C24-1
Page No. 31 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 165
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5614.40
*5825.00
*5825.00
#5977.60
11650.00
11650.00
57.0 PK
119.8 PK
110.5 AV
58.7 PK
62.7 PK
48.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.2
68.2
74.0
54.0
-9.5
-11.3
-5.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.14 H
2.14 H
2.14 H
2.14 H
2.35 H
2.35 H
285
285
285
285
348
348
55.3
79.6
70.3
55.9
48.3
34.5
1.7
40.2
40.2
2.8
14.4
14.4
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5609.60
*5825.00
*5825.00
#5953.60
11650.00
11650.00
57.4 PK
113.8 PK
103.3 AV
58.3 PK
59.9 PK
47.7 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-10.8
68.2
74.0
54.0
-9.9
-14.1
-6.3
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.21 V
1.21 V
1.21 V
1.21 V
2.16 V
2.16 V
12
12
12
12
45
45
55.7
73.6
63.1
55.7
45.5
33.3
1.7
40.2
40.2
2.6
14.4
14.4
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 32 / 99
Report Format Version:6.1.1
802.11n (HT40)
CHANNEL
TX Channel 38
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5190.00
*5190.00
#10380.00
#10380.00
69.9 PK
52.6 AV
110.9 PK
101.1 AV
58.1 PK
45.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-4.1
-1.4
74.0
54.0
-15.9
-9.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.46 H
1.46 H
2.78 H
2.78 H
1.58 H
1.58 H
304
304
290
290
153
153
69.1
51.8
72.2
62.4
45.3
32.2
0.8
0.8
38.7
38.7
12.8
12.8
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5190.00
*5190.00
#10380.00
#10380.00
68.0 PK
51.3 AV
109.5 PK
100.3 AV
57.5 PK
45.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-6.0
-2.7
74.0
54.0
-16.5
-9.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.26 V
3.26 V
3.55 V
3.55 V
2.04 V
2.04 V
359
359
213
213
67.2
50.5
70.8
61.6
44.7
32.2
0.8
0.8
38.7
38.7
12.8
12.8
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 33 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 46
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5230.00
*5230.00
5350.00
5350.00
#10460.00
#10460.00
66.7 PK
52.3 AV
113.4 PK
103.4 AV
57.2 PK
46.1 AV
57.9 PK
45.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-7.3
-1.7
74.0
54.0
74.0
54.0
-16.8
-7.9
-16.1
-9.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.56 H
3.56 H
3.90 H
3.90 H
3.57 H
3.57 H
1.74 H
1.74 H
294
294
291
291
276
276
89
89
65.9
51.5
74.6
64.6
56.1
45.0
44.6
31.7
0.8
0.8
38.8
38.8
1.1
1.1
13.3
13.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5230.00
*5230.00
5350.00
5350.00
#10460.00
#10460.00
64.1 PK
49.5 AV
113.5 PK
103.8 AV
55.7 PK
44.7 AV
58.8 PK
46.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-9.9
-4.5
74.0
54.0
74.0
54.0
-18.3
-9.3
-15.2
-7.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.87 V
3.87 V
3.51 V
3.51 V
2.90 V
2.90 V
2.69 V
2.69 V
359
359
322
322
354
354
63.3
48.7
74.7
65.0
54.6
43.6
45.5
33.5
0.8
0.8
38.8
38.8
1.1
1.1
13.3
13.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 34 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 151
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5644.80
#5650.00
*5755.00
*5755.00
#5935.20
11510.00
11510.00
62.9 PK
66.4 PK
116.7 PK
107.0 AV
58.3 PK
59.3 PK
47.3 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
68.2
-5.3
-1.8
68.2
74.0
54.0
-9.9
-14.7
-6.7
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.68 H
1.68 H
1.98 H
1.98 H
1.68 H
1.98 H
1.98 H
40
40
289
289
40
332
332
61.2
64.7
76.8
67.1
55.7
44.8
32.8
1.7
1.7
39.9
39.9
2.6
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5641.60
#5650.00
*5755.00
*5755.00
#5952.80
11510.00
11510.00
60.2 PK
60.0 PK
111.4 PK
102.0 AV
57.7 PK
59.7 PK
46.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
68.2
-8.0
-8.2
68.2
74.0
54.0
-10.5
-14.3
-7.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.83 V
1.89 V
1.83 V
1.83 V
1.83 V
1.61 V
1.61 V
19
188
188
58.5
58.3
71.5
62.1
55.1
45.2
32.3
1.7
1.7
39.9
39.9
2.6
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 35 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 159
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5636.00
*5795.00
*5795.00
#5925.00
#5928.00
11590.00
11590.00
56.6 PK
117.1 PK
107.4 AV
66.9 PK
63.2 PK
59.3 PK
47.2 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.6
68.2
68.2
74.0
54.0
-1.3
-5.0
-14.7
-6.8
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.03 H
2.03 H
2.03 H
2.42 H
2.03 H
1.77 H
1.77 H
286
286
286
291
286
313
313
54.9
77.0
67.3
64.3
60.6
45.0
32.9
1.7
40.1
40.1
2.6
2.6
14.3
14.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5639.20
*5795.00
*5795.00
#5925.00
#5936.00
11590.00
11590.00
56.4 PK
111.6 PK
101.8 AV
62.5 PK
57.9 PK
59.5 PK
46.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.8
68.2
68.2
74.0
54.0
-5.7
-10.3
-14.5
-7.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.80 V
1.80 V
1.80 V
2.03 V
1.80 V
1.58 V
1.58 V
12
270
270
54.7
71.5
61.7
59.9
55.3
45.2
32.5
1.7
40.1
40.1
2.6
2.6
14.3
14.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 36 / 99
Report Format Version:6.1.1
802.11ac (VHT80)
CHANNEL
TX Channel 42
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5210.00
*5210.00
5350.00
5350.00
#10420.00
#10420.00
68.0 PK
52.7 AV
105.2 PK
95.9 AV
56.7 PK
44.2 AV
59.5 PK
44.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-6.0
-1.3
74.0
54.0
74.0
54.0
-17.3
-9.8
-14.5
-9.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.70 H
2.70 H
2.62 H
2.62 H
2.66 H
2.66 H
2.79 H
2.79 H
295
295
292
292
301
301
127
127
67.2
51.9
66.5
57.2
55.6
43.1
46.6
32.0
0.8
0.8
38.7
38.7
1.1
1.1
12.9
12.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5210.00
*5210.00
5350.00
5350.00
#10420.00
#10420.00
62.5 PK
49.6 AV
104.7 PK
94.5 AV
56.3 PK
43.8 AV
57.5 PK
45.4 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-11.5
-4.4
74.0
54.0
74.0
54.0
-17.7
-10.2
-16.5
-8.6
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
3.25 V
3.25 V
3.56 V
3.56 V
3.00 V
3.00 V
2.49 V
2.49 V
33
33
61.7
48.8
66.0
55.8
55.2
42.7
44.6
32.5
0.8
0.8
38.7
38.7
1.1
1.1
12.9
12.9
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 37 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 155
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5648.80
#5650.00
*5775.00
*5775.00
#5925.00
#5928.00
11550.00
11550.00
62.5 PK
66.3 PK
110.1 PK
100.2 AV
66.6 PK
64.9 PK
59.1 PK
46.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
68.2
-5.7
-1.9
68.2
68.2
74.0
54.0
-1.6
-3.3
-14.9
-7.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.08 H
2.83 H
2.08 H
2.08 H
2.03 H
2.08 H
2.50 H
2.50 H
283
284
283
283
286
283
354
354
60.8
64.6
70.1
60.2
64.0
62.3
44.6
32.4
1.7
1.7
40.0
40.0
2.6
2.6
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5646.40
#5650.00
*5775.00
*5775.00
#5925.00
#5980.80
11550.00
11550.00
60.1 PK
61.8 PK
104.9 PK
95.0 AV
61.2 PK
57.8 PK
59.6 PK
46.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
68.2
-8.1
-6.4
68.2
68.2
74.0
54.0
-7.0
-10.4
-14.4
-7.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.81 V
1.65 V
1.81 V
1.81 V
2.00 V
1.81 V
1.49 V
1.49 V
355
321
321
58.4
60.1
64.9
55.0
58.6
55.0
45.1
32.4
1.7
1.7
40.0
40.0
2.6
2.8
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 38 / 99
Report Format Version:6.1.1
Test Mode B1
802.11a
CHANNEL
TX Channel 36
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5180.00
*5180.00
#6906.00
#10360.00
#10360.00
63.1 PK
46.3 AV
108.2 PK
97.7 AV
56.9 PK
56.1 PK
43.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-10.9
-7.7
68.2
74.0
54.0
-11.3
-17.9
-10.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.55 H
1.55 H
1.94 H
1.94 H
2.27 H
2.46 H
2.46 H
75
75
317
317
257
253
253
62.3
45.5
69.5
59.0
49.9
43.4
31.2
0.8
0.8
38.7
38.7
7.0
12.7
12.7
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5180.00
*5180.00
#6906.00
#10360.00
#10360.00
69.5 PK
52.8 AV
115.8 PK
105.5 AV
58.9 PK
57.8 PK
44.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-4.5
-1.2
68.2
74.0
54.0
-9.3
-16.2
-10.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.52 V
1.52 V
1.49 V
1.49 V
1.75 V
2.30 V
2.30 V
141
141
139
139
109
317
317
68.7
52.0
77.1
66.8
51.9
45.1
31.3
0.8
0.8
38.7
38.7
7.0
12.7
12.7
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 39 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 40
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5200.00
*5200.00
#10400.00
#10400.00
63.0 PK
46.5 AV
111.9 PK
101.0 AV
58.3 PK
45.2 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-11.0
-7.5
74.0
54.0
-15.7
-8.8
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.05 H
1.05 H
1.23 H
1.23 H
1.68 H
1.68 H
14
14
12
12
300
300
62.2
45.7
73.2
62.3
45.6
32.5
0.8
0.8
38.7
38.7
12.7
12.7
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5200.00
*5200.00
#10400.00
#10400.00
70.0 PK
52.8 AV
119.3 PK
108.6 AV
57.3 PK
44.7 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-4.0
-1.2
74.0
54.0
-16.7
-9.3
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.37 V
1.37 V
1.33 V
1.33 V
1.52 V
1.52 V
37
37
257
257
338
338
69.2
52.0
80.6
69.9
44.6
32.0
0.8
0.8
38.7
38.7
12.7
12.7
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 40 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 48
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
*5240.00
*5240.00
5350.00
5350.00
#10480.00
#10480.00
112.3 PK
101.5 AV
57.0 PK
43.4 AV
59.7 PK
45.7 AV
LIMIT
(dBuV/m)
74.0
54.0
74.0
54.0
MARGIN
(dB)
-17.0
-10.6
-14.3
-8.3
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.40 H
1.40 H
1.45 H
1.45 H
1.72 H
1.72 H
12
12
22
22
221
221
73.5
62.7
55.9
42.3
46.2
32.2
38.8
38.8
1.1
1.1
13.5
13.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
*5240.00
*5240.00
5350.00
5350.00
#10480.00
#10480.00
118.6 PK
108.3 AV
57.6 PK
44.2 AV
59.1 PK
45.3 AV
LIMIT
(dBuV/m)
74.0
54.0
74.0
54.0
MARGIN
(dB)
-16.4
-9.8
-14.9
-8.7
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.36 V
1.36 V
1.46 V
1.46 V
1.87 V
1.87 V
193
193
58
58
296
296
79.8
69.5
56.5
43.1
45.6
31.8
38.8
38.8
1.1
1.1
13.5
13.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 41 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 149
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5644.00
*5745.00
*5745.00
#5970.40
11490.00
11490.00
57.2 PK
110.5 PK
100.2 AV
58.8 PK
60.7 PK
46.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.0
68.2
74.0
54.0
-9.4
-13.3
-7.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.28 H
2.28 H
2.28 H
2.28 H
2.09 H
2.09 H
319
319
319
319
98
98
55.5
70.6
60.3
56.1
46.2
32.4
1.7
39.9
39.9
2.7
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5640.00
*5745.00
*5745.00
#5971.20
11490.00
11490.00
58.4 PK
119.8 PK
109.1 AV
59.3 PK
59.8 PK
47.1 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-9.8
68.2
74.0
54.0
-8.9
-14.2
-6.9
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.28 V
1.28 V
1.28 V
1.28 V
1.52 V
1.52 V
153
153
153
153
325
325
56.7
79.9
69.2
56.6
45.3
32.6
1.7
39.9
39.9
2.7
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 42 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 157
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5611.20
*5785.00
*5785.00
#5972.80
11570.00
11570.00
57.0 PK
110.3 PK
100.0 AV
59.2 PK
59.2 PK
46.6 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-11.2
68.2
74.0
54.0
-9.0
-14.8
-7.4
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.56 H
2.56 H
2.56 H
2.56 H
2.41 H
2.41 H
327
327
327
327
75
75
55.3
70.2
59.9
56.5
44.9
32.3
1.7
40.1
40.1
2.7
14.3
14.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5611.20
*5785.00
*5785.00
#5984.00
11570.00
11570.00
58.2 PK
117.6 PK
107.2 AV
58.8 PK
62.2 PK
49.7 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-10.0
68.2
74.0
54.0
-9.4
-11.8
-4.3
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 V
1.00 V
1.00 V
1.00 V
2.79 V
2.79 V
279
279
279
279
35
35
56.5
77.5
67.1
56.0
47.9
35.4
1.7
40.1
40.1
2.8
14.3
14.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
Report No.: RF170307C24-1
Page No. 43 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 165
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5621.60
*5825.00
*5825.00
#5934.40
11650.00
11650.00
57.5 PK
111.8 PK
101.5 AV
59.2 PK
60.3 PK
47.2 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-10.7
68.2
74.0
54.0
-9.0
-13.7
-6.8
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.58 H
2.58 H
2.58 H
2.58 H
2.04 H
2.04 H
323
323
323
323
73
73
55.8
71.6
61.3
56.6
45.9
32.8
1.7
40.2
40.2
2.6
14.4
14.4
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5603.20
*5825.00
*5825.00
#5929.60
11650.00
11650.00
57.9 PK
119.1 PK
107.7 AV
64.1 PK
63.3 PK
51.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-10.3
68.2
74.0
54.0
-4.1
-10.7
-3.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 V
1.00 V
1.00 V
1.00 V
2.64 V
2.64 V
276
276
276
276
32
32
56.2
78.9
67.5
61.5
48.9
36.6
1.7
40.2
40.2
2.6
14.4
14.4
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 44 / 99
Report Format Version:6.1.1
802.11n (HT20)
CHANNEL
TX Channel 36
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5180.00
*5180.00
#10360.00
#10360.00
64.1 PK
47.4 AV
106.8 PK
96.2 AV
58.8 PK
45.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-9.9
-6.6
74.0
54.0
-15.2
-9.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.09 H
1.09 H
1.02 H
1.02 H
2.52 H
2.52 H
13
13
13
13
177
177
63.3
46.6
68.1
57.5
46.1
32.3
0.8
0.8
38.7
38.7
12.7
12.7
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5180.00
*5180.00
#10360.00
#10360.00
70.5 PK
52.9 AV
113.6 PK
102.9 AV
58.3 PK
44.6 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-3.5
-1.1
74.0
54.0
-15.7
-9.4
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.30 V
1.30 V
1.29 V
1.29 V
2.77 V
2.77 V
22
22
321
321
46
46
69.7
52.1
74.9
64.2
45.6
31.9
0.8
0.8
38.7
38.7
12.7
12.7
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 45 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 40
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5200.00
*5200.00
#10400.00
#10400.00
64.6 PK
45.6 AV
110.3 PK
100.1 AV
58.5 PK
44.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-9.4
-8.4
74.0
54.0
-15.5
-9.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.02 H
1.02 H
1.00 H
1.00 H
1.92 H
1.92 H
79
79
76
76
178
178
63.8
44.8
71.6
61.4
45.8
32.2
0.8
0.8
38.7
38.7
12.7
12.7
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5200.00
*5200.00
#10400.00
#10400.00
72.3 PK
52.7 AV
117.3 PK
106.6 AV
58.2 PK
44.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-1.7
-1.3
74.0
54.0
-15.8
-9.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.31 V
1.31 V
1.22 V
1.22 V
1.82 V
1.82 V
22
22
262
262
271
271
71.5
51.9
78.6
67.9
45.5
32.1
0.8
0.8
38.7
38.7
12.7
12.7
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 46 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 48
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
*5240.00
*5240.00
5350.00
5350.00
#10480.00
#10480.00
112.0 PK
101.0 AV
56.7 PK
43.6 AV
58.6 PK
45.3 AV
LIMIT
(dBuV/m)
74.0
54.0
74.0
54.0
MARGIN
(dB)
-17.3
-10.4
-15.4
-8.7
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 H
1.00 H
1.21 H
1.21 H
1.99 H
1.99 H
77
77
57
57
73.2
62.2
55.6
42.5
45.1
31.8
38.8
38.8
1.1
1.1
13.5
13.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
*5240.00
*5240.00
5350.00
5350.00
#10480.00
#10480.00
118.2 PK
107.6 AV
57.4 PK
44.0 AV
58.3 PK
45.4 AV
LIMIT
(dBuV/m)
74.0
54.0
74.0
54.0
MARGIN
(dB)
-16.6
-10.0
-15.7
-8.6
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.27 V
1.27 V
1.38 V
1.38 V
1.73 V
1.73 V
269
269
298
298
98
98
79.4
68.8
56.3
42.9
44.8
31.9
38.8
38.8
1.1
1.1
13.5
13.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 47 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 149
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5601.60
*5745.00
*5745.00
#5999.20
11490.00
11490.00
58.0 PK
110.8 PK
100.1 AV
59.3 PK
59.3 PK
46.6 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-10.2
68.2
74.0
54.0
-8.9
-14.7
-7.4
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.61 H
2.61 H
2.61 H
2.61 H
1.75 H
1.75 H
315
315
315
315
168
168
56.4
70.9
60.2
56.5
44.8
32.1
1.6
39.9
39.9
2.8
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5616.00
*5745.00
*5745.00
#5947.20
11490.00
11490.00
57.9 PK
117.6 PK
106.8 AV
59.0 PK
62.3 PK
48.4 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-10.3
68.2
74.0
54.0
-9.2
-11.7
-5.6
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 V
1.00 V
1.00 V
1.00 V
2.92 V
2.92 V
277
277
277
277
34
34
56.2
77.7
66.9
56.4
47.8
33.9
1.7
39.9
39.9
2.6
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 48 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 157
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5604.80
*5785.00
*5785.00
#5985.60
11570.00
11570.00
58.6 PK
110.5 PK
99.9 AV
59.0 PK
59.8 PK
47.1 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-9.6
68.2
74.0
54.0
-9.2
-14.2
-6.9
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.48 H
2.48 H
2.48 H
2.48 H
1.82 H
1.82 H
326
326
326
326
147
147
56.9
70.4
59.8
56.2
45.5
32.8
1.7
40.1
40.1
2.8
14.3
14.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5624.80
*5785.00
*5785.00
#5945.60
11570.00
11570.00
58.1 PK
117.7 PK
107.3 AV
59.0 PK
62.8 PK
48.5 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-10.1
68.2
74.0
54.0
-9.2
-11.2
-5.5
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 V
1.00 V
1.00 V
1.00 V
2.24 V
2.24 V
275
275
275
275
88
88
56.4
77.6
67.2
56.4
48.5
34.2
1.7
40.1
40.1
2.6
14.3
14.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
Report No.: RF170307C24-1
Page No. 49 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 165
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5606.40
*5825.00
*5825.00
#5936.80
11650.00
11650.00
57.4 PK
112.7 PK
101.1 AV
59.6 PK
60.6 PK
46.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-10.8
68.2
74.0
54.0
-8.6
-13.4
-7.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.50 H
2.50 H
2.50 H
2.50 H
2.74 H
2.74 H
323
323
323
323
230
230
55.7
72.5
60.9
57.0
46.2
32.4
1.7
40.2
40.2
2.6
14.4
14.4
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5632.80
*5825.00
*5825.00
#5933.60
11650.00
11650.00
58.7 PK
118.9 PK
108.0 AV
64.7 PK
64.6 PK
50.6 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-9.5
68.2
74.0
54.0
-3.5
-9.4
-3.4
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 V
1.00 V
1.00 V
1.00 V
2.52 V
2.52 V
276
276
276
275
33
33
57.0
78.7
67.8
62.1
50.2
36.2
1.7
40.2
40.2
2.6
14.4
14.4
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 50 / 99
Report Format Version:6.1.1
802.11n (HT40)
CHANNEL
TX Channel 38
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5190.00
*5190.00
#10380.00
#10380.00
65.1 PK
48.6 AV
102.8 PK
93.2 AV
58.4 PK
45.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-8.9
-5.4
74.0
54.0
-15.6
-9.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.10 H
1.10 H
1.34 H
1.34 H
1.83 H
1.83 H
14
14
14
14
323
323
64.3
47.8
64.1
54.5
45.6
32.2
0.8
0.8
38.7
38.7
12.8
12.8
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5190.00
*5190.00
#10380.00
#10380.00
69.9 PK
52.2 AV
110.3 PK
100.6 AV
57.4 PK
44.0 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-4.1
-1.8
74.0
54.0
-16.6
-10.0
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.58 V
1.58 V
1.51 V
1.51 V
1.42 V
1.42 V
142
142
140
140
198
198
69.1
51.4
71.6
61.9
44.6
31.2
0.8
0.8
38.7
38.7
12.8
12.8
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 51 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 46
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5230.00
*5230.00
#10460.00
#10460.00
60.7 PK
46.6 AV
106.3 PK
96.8 AV
59.3 PK
45.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-13.3
-7.4
74.0
54.0
-14.7
-8.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.10 H
1.10 H
1.30 H
1.30 H
1.92 H
1.92 H
77
77
15
15
217
217
59.9
45.8
67.5
58.0
46.0
32.5
0.8
0.8
38.8
38.8
13.3
13.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5230.00
*5230.00
#10460.00
#10460.00
67.2 PK
52.6 AV
113.9 PK
103.4 AV
58.3 PK
44.6 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-6.8
-1.4
74.0
54.0
-15.7
-9.4
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.30 V
1.30 V
1.26 V
1.26 V
1.74 V
1.74 V
25
25
30
30
142
142
66.4
51.8
75.1
64.6
45.0
31.3
0.8
0.8
38.8
38.8
13.3
13.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 52 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 151
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5648.00
#5650.00
*5755.00
*5755.00
#5948.00
11510.00
11510.00
61.2 PK
59.1 PK
108.2 PK
98.4 AV
58.3 PK
59.7 PK
46.6 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
68.2
-7.0
-9.1
68.2
74.0
54.0
-9.9
-14.3
-7.4
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.43 H
2.45 H
2.43 H
2.43 H
2.43 H
1.82 H
1.82 H
314
308
314
314
314
243
243
59.5
57.4
68.3
58.5
55.7
45.2
32.1
1.7
1.7
39.9
39.9
2.6
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5641.60
#5650.00
*5755.00
*5755.00
#5931.20
11510.00
11510.00
65.2 PK
66.8 PK
114.1 PK
104.2 AV
59.2 PK
59.2 PK
46.4 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
68.2
-3.0
-1.4
68.2
74.0
54.0
-9.0
-14.8
-7.6
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 V
1.00 V
1.00 V
1.00 V
1.00 V
2.25 V
2.25 V
279
270
279
279
279
84
84
63.5
65.1
74.2
64.3
56.6
44.7
31.9
1.7
1.7
39.9
39.9
2.6
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 53 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 159
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5647.20
*5795.00
*5795.00
#5926.00
#5936.80
11590.00
11590.00
58.8 PK
108.8 PK
98.3 AV
61.7 PK
61.0 PK
59.4 PK
46.3 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-9.4
68.2
68.2
74.0
54.0
-6.5
-7.2
-14.6
-7.7
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.49 H
2.49 H
2.49 H
2.37 H
2.49 H
1.74 H
1.74 H
326
326
326
308
326
109
109
57.1
68.7
58.2
59.1
58.4
45.1
32.0
1.7
40.1
40.1
2.6
2.6
14.3
14.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5643.20
*5795.00
*5795.00
#5926.00
#5931.20
11590.00
11590.00
61.4 PK
115.3 PK
105.1 AV
66.7 PK
64.8 PK
59.5 PK
46.5 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
-6.8
68.2
68.2
74.0
54.0
-1.5
-3.4
-14.5
-7.5
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 V
1.00 V
1.00 V
1.02 V
1.00 V
2.41 V
2.41 V
276
276
276
303
276
87
87
59.7
75.2
65.0
64.1
62.2
45.2
32.2
1.7
40.1
40.1
2.6
2.6
14.3
14.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 54 / 99
Report Format Version:6.1.1
802.11ac (VHT80)
CHANNEL
TX Channel 42
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5210.00
*5210.00
5350.00
5350.00
#10420.00
#10420.00
62.2 PK
49.5 AV
100.4 PK
90.5 AV
56.9 PK
44.0 AV
58.6 PK
45.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-11.8
-4.5
74.0
54.0
74.0
54.0
-17.1
-10.0
-15.4
-8.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.11 H
1.11 H
1.21 H
1.21 H
1.23 H
1.23 H
1.88 H
1.88 H
78
78
12
12
77
77
277
277
61.4
48.7
61.7
51.8
55.8
42.9
45.7
32.9
0.8
0.8
38.7
38.7
1.1
1.1
12.9
12.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
5150.00
5150.00
*5210.00
*5210.00
5350.00
5350.00
#10420.00
#10420.00
66.6 PK
52.9 AV
106.1 PK
96.5 AV
56.6 PK
43.7 AV
56.5 PK
43.6 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
74.0
54.0
-7.4
-1.1
74.0
54.0
74.0
54.0
-17.4
-10.3
-17.5
-10.4
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.25 V
1.25 V
1.49 V
1.49 V
1.33 V
1.33 V
1.57 V
1.57 V
160
160
138
138
142
142
241
241
65.8
52.1
67.4
57.8
55.5
42.6
43.6
30.7
0.8
0.8
38.7
38.7
1.1
1.1
12.9
12.9
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 55 / 99
Report Format Version:6.1.1
CHANNEL
TX Channel 155
FREQUENCY RANGE
1GHz ~ 40GHz
Peak (PK)
Average (AV)
DETECTOR
FUNCTION
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5623.20
#5645.00
*5775.00
*5775.00
#5956.00
11550.00
11550.00
60.1 PK
58.6 PK
102.0 PK
91.5 AV
59.4 PK
59.9 PK
46.8 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
68.2
-8.1
-9.6
68.2
74.0
54.0
-8.8
-14.1
-7.2
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
2.26 H
2.28 H
2.26 H
2.26 H
2.26 H
1.82 H
1.82 H
321
324
321
321
321
143
143
58.4
56.9
62.0
51.5
56.8
45.4
32.3
1.7
1.7
40.0
40.0
2.6
14.5
14.5
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
#5622.40
#5645.00
*5775.00
*5775.00
#5929.60
11550.00
11550.00
65.3 PK
67.0 PK
107.1 PK
97.5 AV
61.3 PK
59.3 PK
45.9 AV
LIMIT
(dBuV/m)
MARGIN
(dB)
68.2
68.2
-2.9
-1.2
68.2
74.0
54.0
-6.9
-14.7
-8.1
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1.00 V
1.00 V
1.00 V
1.00 V
1.00 V
2.73 V
2.73 V
273
269
273
273
273
93
93
63.6
65.3
67.1
57.5
58.7
44.8
31.4
1.7
1.7
40.0
40.0
2.6
14.5
14.5
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
5. " * ": Fundamental frequency.
6. " # ": The radiated frequency is out of the restricted band.
Report No.: RF170307C24-1
Page No. 56 / 99
Report Format Version:6.1.1
Below 1GHz Worst-Case Data:
Test Mode A1
802.11a
CHANNEL
TX Channel 157
FREQUENCY RANGE
9kHz ~ 1GHz
DETECTOR
FUNCTION
Quasi-Peak (QP)
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
55.18
107.67
146.56
267.10
547.08
842.61
26.2 QP
28.9 QP
26.8 QP
30.6 QP
22.7 QP
29.5 QP
40.0
43.5
43.5
46.0
46.0
46.0
-13.8
-14.6
-16.7
-15.4
-23.3
-16.5
2.00 H
1.50 H
1.00 H
1.00 H
2.00 H
2.00 H
72
119
119
108
38
87
40.7
46.4
40.8
43.8
29.8
30.4
-14.5
-17.5
-14.0
-13.2
-7.1
-0.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
35.73
55.18
138.78
267.10
722.07
937.88
37.2 QP
38.2 QP
27.3 QP
30.3 QP
33.7 QP
31.8 QP
40.0
40.0
43.5
46.0
46.0
46.0
-2.8
-1.8
-16.2
-15.7
-12.3
-14.2
1.00 V
1.00 V
1.00 V
1.99 V
1.49 V
1.00 V
38
357
170
310
14
53.1
52.7
41.6
43.5
36.9
30.7
-15.9
-14.5
-14.3
-13.2
-3.2
1.1
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Report No.: RF170307C24-1
Page No. 57 / 99
Report Format Version:6.1.1
Test Mode A2
802.11a
CHANNEL
TX Channel 157
FREQUENCY RANGE
9kHz ~ 1GHz
DETECTOR
FUNCTION
Quasi-Peak (QP)
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
57.12
105.73
142.67
263.21
718.18
928.16
27.1 QP
29.9 QP
29.7 QP
29.3 QP
27.0 QP
30.8 QP
40.0
43.5
43.5
46.0
46.0
46.0
-12.9
-13.6
-13.8
-16.7
-19.0
-15.2
1.99 H
1.99 H
1.99 H
1.50 H
1.50 H
1.50 H
231
120
281
231
355
223
41.7
47.6
43.8
42.7
30.3
29.8
-14.6
-17.7
-14.1
-13.4
-3.3
1.0
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
35.73
142.67
263.21
467.36
729.84
887.33
32.9 QP
22.6 QP
30.3 QP
22.2 QP
27.7 QP
34.8 QP
40.0
43.5
46.0
46.0
46.0
46.0
-7.1
-20.9
-15.7
-23.8
-18.3
-11.2
1.00 V
1.00 V
1.51 V
1.00 V
2.00 V
1.00 V
323
192
179
314
217
81
48.8
36.7
43.7
30.6
30.5
34.9
-15.9
-14.1
-13.4
-8.4
-2.8
-0.1
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Report No.: RF170307C24-1
Page No. 58 / 99
Report Format Version:6.1.1
Test Mode B1
802.11a
CHANNEL
TX Channel 157
FREQUENCY RANGE
9kHz ~ 1GHz
DETECTOR
FUNCTION
Quasi-Peak (QP)
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
57.12
101.84
185.44
220.44
302.10
747.34
26.3 QP
31.2 QP
32.5 QP
30.2 QP
26.2 QP
31.7 QP
40.0
43.5
43.5
46.0
46.0
46.0
-13.7
-12.3
-11.0
-15.8
-19.8
-14.3
1.99 H
1.99 H
1.50 H
1.50 H
1.00 H
1.00 H
220
130
226
353
123
351
40.9
49.4
48.1
45.9
38.2
34.0
-14.6
-18.2
-15.6
-15.7
-12.0
-2.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
55.18
101.84
142.67
187.39
305.99
747.34
36.6 QP
32.3 QP
26.7 QP
26.8 QP
24.0 QP
31.9 QP
40.0
43.5
43.5
43.5
46.0
46.0
-3.4
-11.2
-16.8
-16.7
-22.0
-14.1
1.00 V
1.51 V
1.00 V
2.00 V
1.00 V
1.51 V
64
262
258
101
110
51.1
50.5
40.8
42.5
35.9
34.2
-14.5
-18.2
-14.1
-15.7
-11.9
-2.3
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Report No.: RF170307C24-1
Page No. 59 / 99
Report Format Version:6.1.1
Test Mode B2
802.11a
CHANNEL
TX Channel 157
FREQUENCY RANGE
9kHz ~ 1GHz
DETECTOR
FUNCTION
Quasi-Peak (QP)
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
105.73
142.67
187.39
224.33
315.71
815.39
29.0 QP
32.7 QP
35.1 QP
30.0 QP
29.0 QP
29.3 QP
43.5
43.5
43.5
46.0
46.0
46.0
-14.5
-10.8
-8.4
-16.0
-17.0
-16.7
2.00 H
2.00 H
1.51 H
1.51 H
1.01 H
1.51 H
93
93
162
32
126
261
46.7
46.8
50.8
45.8
40.5
30.5
-17.7
-14.1
-15.7
-15.8
-11.5
-1.2
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
37.68
142.67
185.44
333.21
729.84
928.16
36.2 QP
28.4 QP
29.0 QP
25.4 QP
30.9 QP
30.8 QP
40.0
43.5
43.5
46.0
46.0
46.0
-3.8
-15.1
-14.5
-20.6
-15.1
-15.2
1.99 V
1.00 V
1.49 V
1.49 V
1.49 V
1.99 V
149
265
71
67
172
51.6
42.5
44.6
36.5
33.7
29.8
-15.4
-14.1
-15.6
-11.1
-2.8
1.0
Remarks:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Report No.: RF170307C24-1
Page No. 60 / 99
Report Format Version:6.1.1
4.2
4.2.1
Conducted Emission Measurement
Limits of Conducted Emission Measurement
Conducted Limit (dBuV)
Frequency (MHz)
Quasi-peak
Average
0.15 - 0.5
66 - 56
56 - 46
0.50 - 5.0
56
46
5.0 - 30.0
60
50
Note: 1. The lower limit shall apply at the transition frequencies.
2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz.
4.2.2
Test Instruments
Description & Manufacturer
Test Receiver
ROHDE & SCHWARZ
RF signal cable (with 10dB PAD)
Woken
LISN
ROHDE & SCHWARZ
(EUT)
LISN
ROHDE & SCHWARZ
(Peripheral)
Software
ADT
Model No.
Serial No.
Cal. Date
Cal. Due
ESCS 30
100288
Aug. 18, 2016 Aug. 17, 2017
5D-FB
Cable-cond2-01
Dec. 22, 2016 Dec. 21, 2017
ESH2-Z5
100100
Jan. 17, 2017
Jan. 16, 2018
ESH3-Z5
100312
Jul. 26, 2016
Jul. 25, 2017
BV ADT_Cond_
V7.3.7.3
NA
NA
NA
Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable
to NML/ROC and NIST/USA.
2. The test was performed in HwaYa Shielded Room 2.
3. The VCCI Site Registration No. is C-2047.
Report No.: RF170307C24-1
Page No. 61 / 99
Report Format Version:6.1.1
4.2.3
Test Procedures
a.
The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being
connected to the power mains through a line impedance stabilization network (LISN). Other support units
were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of
coupling impedance for the measuring instrument.
b.
Both lines of the power mains connected to the EUT were checked for maximum conducted interference.
c.
The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not
recorded.
NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP)
and average detection (AV) at frequency 0.15MHz-30MHz.
4.2.4
Deviation from Test Standard
No deviation.
4.2.5
Test Setup
Vertical Ground
Reference Plane
40cm
Test Receiver
EUT
80cm
LISN
Horizontal Ground
Reference Plane
Note: 1.Support units were connected to second LISN.
For the actual test configuration, please refer to the attached file (Test Setup Photo).
4.2.6
EUT Operating Conditions
Same as 4.1.6.
Report No.: RF170307C24-1
Page No. 62 / 99
Report Format Version:6.1.1
4.2.7
Test Results
Worst-case data: 802.11a
Test Mode A1
Phase
Freq.
Corr.
Factor
[MHz]
0.17734
0.22031
0.41172
3.03906
9.64453
19.94141
(dB)
10.00
10.02
10.03
10.15
10.26
10.46
No
Detector Function
Line (L)
Reading Value
[dB (uV)]
Q.P.
AV.
37.65
23.85
33.38
19.71
24.79
12.66
19.37
9.03
22.70
13.95
19.65
12.41
Emission Level
[dB (uV)]
Q.P.
AV.
47.65
33.85
43.40
29.73
34.82
22.69
29.52
19.18
32.96
24.21
30.11
22.87
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
64.61
54.61
62.81
52.81
57.61
47.61
56.00
46.00
60.00
50.00
60.00
50.00
Margin
(dB)
Q.P.
AV.
-16.96 -20.76
-19.41 -23.08
-22.79 -24.92
-26.48 -26.82
-27.04 -25.79
-29.89 -27.13
Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF170307C24-1
Page No. 63 / 99
Report Format Version:6.1.1
Phase
Freq.
Corr.
Factor
[MHz]
0.16953
0.21250
0.39219
1.71094
7.66797
19.96875
(dB)
10.00
9.95
9.99
10.06
10.20
10.56
No
Detector Function
Neutral (N)
Reading Value
[dB (uV)]
Q.P.
AV.
37.75
20.89
33.52
16.27
23.03
11.56
14.32
6.00
16.37
8.39
16.73
8.56
Emission Level
[dB (uV)]
Q.P.
AV.
47.75
30.89
43.47
26.22
33.02
21.55
24.38
16.06
26.57
18.59
27.29
19.12
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
64.98
54.98
63.11
53.11
58.02
48.02
56.00
46.00
60.00
50.00
60.00
50.00
Margin
(dB)
Q.P.
AV.
-17.23 -24.09
-19.64 -26.89
-25.00 -26.47
-31.62 -29.94
-33.43 -31.41
-32.71 -30.88
Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF170307C24-1
Page No. 64 / 99
Report Format Version:6.1.1
Test Mode A2
Phase
Freq.
Corr.
Factor
[MHz]
0.15000
0.48203
0.91563
2.94531
7.01563
19.48438
(dB)
9.99
10.04
10.07
10.14
10.22
10.45
No
Detector Function
Line (L)
Reading Value
[dB (uV)]
Q.P.
AV.
26.47
17.24
32.43
27.10
10.56
4.92
4.50
-1.72
-0.33
-5.75
17.55
11.42
Emission Level
[dB (uV)]
Q.P.
AV.
36.46
27.23
42.47
37.14
20.63
14.99
14.64
8.42
9.89
4.47
28.00
21.87
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
66.00
56.00
56.30
46.30
56.00
46.00
56.00
46.00
60.00
50.00
60.00
50.00
Margin
(dB)
Q.P.
AV.
-29.54 -28.77
-13.83
-9.16
-35.37 -31.01
-41.36 -37.58
-50.11 -45.53
-32.00 -28.13
Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF170307C24-1
Page No. 65 / 99
Report Format Version:6.1.1
Phase
Freq.
Corr.
Factor
[MHz]
0.15000
0.48984
0.75938
0.97813
3.66797
20.40625
(dB)
10.03
10.01
10.06
10.10
10.16
10.55
No
Detector Function
Neutral (N)
Reading Value
[dB (uV)]
Q.P.
AV.
26.37
16.82
31.75
26.03
16.53
11.27
14.59
9.51
4.94
-1.21
17.04
10.87
Emission Level
[dB (uV)]
Q.P.
AV.
36.40
26.85
41.76
36.04
26.59
21.33
24.69
19.61
15.10
8.95
27.59
21.42
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
66.00
56.00
56.17
46.17
56.00
46.00
56.00
46.00
56.00
46.00
60.00
50.00
Margin
(dB)
Q.P.
AV.
-29.60 -29.15
-14.41 -10.13
-29.41 -24.67
-31.31 -26.39
-40.90 -37.05
-32.41 -28.58
Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF170307C24-1
Page No. 66 / 99
Report Format Version:6.1.1
Test Mode B1
Phase
Freq.
Corr.
Factor
[MHz]
0.17734
0.41563
1.05859
4.33984
10.70313
20.79688
(dB)
10.00
10.03
10.08
10.18
10.27
10.43
No
Detector Function
Line (L)
Reading Value
[dB (uV)]
Q.P.
AV.
37.53
23.28
24.42
14.54
20.62
9.29
18.67
8.44
21.86
13.88
20.57
12.81
Emission Level
[dB (uV)]
Q.P.
AV.
47.53
33.28
34.45
24.57
30.70
19.37
28.85
18.62
32.13
24.15
31.00
23.24
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
64.61
54.61
57.54
47.54
56.00
46.00
56.00
46.00
60.00
50.00
60.00
50.00
Margin
(dB)
Q.P.
AV.
-17.08 -21.33
-23.09 -22.97
-25.30 -26.63
-27.15 -27.38
-27.87 -25.85
-29.00 -26.76
Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF170307C24-1
Page No. 67 / 99
Report Format Version:6.1.1
Phase
Freq.
Corr.
Factor
[MHz]
0.17734
0.22031
0.39219
2.39063
9.01563
18.97266
(dB)
9.98
9.95
9.99
10.08
10.21
10.52
No
Detector Function
Neutral (N)
Reading Value
[dB (uV)]
Q.P.
AV.
37.39
23.24
33.06
17.85
22.16
7.67
14.44
5.98
19.76
10.95
16.41
8.34
Emission Level
[dB (uV)]
Q.P.
AV.
47.37
33.22
43.01
27.80
32.15
17.66
24.52
16.06
29.97
21.16
26.93
18.86
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
64.61
54.61
62.81
52.81
58.02
48.02
56.00
46.00
60.00
50.00
60.00
50.00
Margin
(dB)
Q.P.
AV.
-17.24 -21.39
-19.80 -25.01
-25.87 -30.36
-31.48 -29.94
-30.03 -28.84
-33.07 -31.14
Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF170307C24-1
Page No. 68 / 99
Report Format Version:6.1.1
Test Mode B2
Phase
Freq.
Corr.
Factor
[MHz]
0.15000
0.48203
0.75156
1.65625
9.06250
18.89063
(dB)
9.99
10.04
10.06
10.10
10.25
10.43
No
Detector Function
Line (L)
Reading Value
[dB (uV)]
Q.P.
AV.
26.53
17.18
32.46
27.38
18.66
15.63
13.83
9.17
0.49
-4.89
17.90
11.72
Emission Level
[dB (uV)]
Q.P.
AV.
36.52
27.17
42.50
37.42
28.72
25.69
23.93
19.27
10.74
5.36
28.33
22.15
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
66.00
56.00
56.30
46.30
56.00
46.00
56.00
46.00
60.00
50.00
60.00
50.00
Margin
(dB)
Q.P.
AV.
-29.48 -28.83
-13.80
-8.88
-27.28 -20.31
-32.07 -26.73
-49.26 -44.64
-31.67 -27.85
Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF170307C24-1
Page No. 69 / 99
Report Format Version:6.1.1
Phase
Freq.
Corr.
Factor
[MHz]
0.15391
0.48594
0.77500
2.71094
7.64453
19.37891
(dB)
10.02
10.01
10.06
10.10
10.20
10.54
No
Detector Function
Neutral (N)
Reading Value
[dB (uV)]
Q.P.
AV.
24.90
15.39
31.78
26.69
15.94
11.20
4.60
-1.40
6.67
0.60
17.69
11.25
Emission Level
[dB (uV)]
Q.P.
AV.
34.92
25.41
41.79
36.70
26.00
21.26
14.70
8.70
16.87
10.80
28.23
21.79
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
65.79
55.79
56.24
46.24
56.00
46.00
56.00
46.00
60.00
50.00
60.00
50.00
Margin
(dB)
Q.P.
AV.
-30.87 -30.38
-14.45
-9.54
-30.00 -24.74
-41.30 -37.30
-43.13 -39.20
-31.77 -28.21
Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF170307C24-1
Page No. 70 / 99
Report Format Version:6.1.1
4.3
Transmit Power Measurement
4.3.1
Limits of Transmit Power Measurement
Operation
Band
EUT Category
LIMIT
Fixed point-to-point Access Point
1 Watt (30 dBm)
(Max. e.i.r.p ≦ 125mW(21 dBm) at any elevation
angle above 30 degrees as measured from the
horizon)
1 Watt (30 dBm)
Indoor Access Point
1 Watt (30 dBm)
Mobile and Portable client device
250mW (24 dBm)
Outdoor Access Point
U-NII-1

U-NII-2A
250mW (24 dBm) or 11 dBm+10 log B*
U-NII-2C
250mW (24 dBm) or 11 dBm+10 log B*

*B is the 26 dB emission bandwidth in megahertz
U-NII-3
1 Watt (30 dBm)
Per KDB 662911 Method of conducted output power measurement on IEEE 802.11 devices,
Array Gain = 0 dB (i.e., no array gain) for NANT ≤ 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths ≥ 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT ≥ 5.
For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB.
4.3.2
Test Setup
For Power Output Measurement
802.11a, 802.11n (HT20), 802.11n (HT40)
EUT
Attenuator
Power Sensor
Power Meter
802.11ac (VHT80)
EUT
Attenuator
Spectrum
Analyzer
Attenuator
Spectrum
Analyzer
For 26dB Bandwidth
EUT
Report No.: RF170307C24-1
Page No. 71 / 99
Report Format Version:6.1.1
4.3.3
Test Instruments
Refer to section 4.1.2 to get information of above instrument.
4.3.4
Test Procedure
For Average Power Measurement
For 802.11a, 802.11n (HT20), 802.11n (HT40)
Method PM is used to perform output power measurement, trigger and gating function of wide band power
meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value.
For 802.11ac (VHT80)
1) Set span to encompass the entire 26 dB EBW (or, alternatively, the entire 99% occupied bandwidth) of the
signal.
2) Set sweep trigger to “free run”.
3) Set RBW = 1 MHz.
4) Set VBW ≥ 3 MHz.
5) Number of points in sweep ≥ 2 Span / RBW.
6) Sweep time ≤ (number of points in sweep) * T
7) Using emission bandwidth to determine the frequency span for integration the channel bandwidth.
8) Detector = RMS.
9) Trace mode = max hold.
10) Allow max hold to run for at least 60 seconds, or longer as needed to allow the trace to stabilize.
For 26dB Bandwidth
1) Set RBW = approximately 1% of the emission bandwidth.
2) Set the VBW > RBW.
3) Detector = Peak.
4) Trace mode = max hold.
5) Measure the maximum width of the emission that is 26 dB down from the peak of the emission. Compare
this with the RBW setting of the analyzer. Readjust RBW and repeat measurement as needed until the
RBW/EBW ratio is approximately 1%.
4.3.5
Deviation fromTest Standard
No deviation.
4.3.6
EUT Operating Conditions
The software provided by client to enable the EUT under transmission condition continuously at lowest,
middle and highest channel frequencies individually.
Report No.: RF170307C24-1
Page No. 72 / 99
Report Format Version:6.1.1
4.3.7
Test Result
Power Output:
CDD Mode
802.11a
Chan.
Freq.
(MHz)
Chain 0
Chain 1
Total
Power
(mW)
Maximum Conducted Power (dBm)
Total
Power
(dBm)
Power
Limit
(dBm)
Pass / Fail
36
5180
17.62
16.92
107.014
20.29
30
Pass
40
5200
21.56
21.13
272.937
24.36
30
Pass
48
5240
19.87
20.03
197.744
22.96
30
Pass
149
5745
21.48
21.55
283.494
24.53
30
Pass
157
5785
21.75
21.83
302.029
24.80
30
Pass
165
5825
21.57
21.44
282.865
24.52
30
Pass
Total
Power
(dBm)
Power
Limit
(dBm)
Pass / Fail
802.11n (HT20)
Chan.
Freq.
(MHz)
Chain 0
Chain 1
Total
Power
(mW)
Maximum Conducted Power (dBm)
36
5180
17.41
15.99
94.800
19.77
30
Pass
40
5200
21.06
20.37
236.537
23.74
30
Pass
48
5240
19.88
20.14
200.551
23.02
30
Pass
149
5745
21.52
21.25
275.258
24.40
30
Pass
157
5785
21.78
21.64
296.542
24.72
30
Pass
165
5825
21.54
21.48
283.166
24.52
30
Pass
Total
Power
(dBm)
Power
Limit
(dBm)
Pass / Fail
802.11n (HT40)
Chan.
Freq.
(MHz)
Chain 0
Chain 1
Total
Power
(mW)
Maximum Conducted Power (dBm)
38
5190
16.60
15.64
82.353
19.16
30
Pass
46
5230
19.73
19.35
180.071
22.55
30
Pass
151
5755
21.84
21.79
303.765
24.83
30
Pass
159
5795
22.04
22.03
319.544
25.05
30
Pass
Total
Power
(dBm)
Power
Limit
(dBm)
Pass / Fail
802.11ac (VHT80)
Chan.
Freq.
(MHz)
Chain 0
Chain 1
Total
Power
(mW)
Maximum Conducted Power (dBm)
42
5210
15.23
14.54
61.788
17.91
30
Pass
155
5775
17.71
17.35
113.345
20.54
30
Pass
Report No.: RF170307C24-1
Page No. 73 / 99
Report Format Version:6.1.1
Beamforming Mode
802.11n (HT20)
Chan.
Freq.
(MHz)
Chain 0
Chain 1
Total
Power
(mW)
Maximum Conducted Power (dBm)
Total
Power
(dBm)
Power
Limit
(dBm)
Pass / Fail
36
5180
14.400
12.98
47.403
16.76
27.99
Pass
40
5200
18.050
17.36
118.277
20.73
27.99
Pass
48
5240
16.870
17.13
100.282
20.01
27.99
Pass
149
5745
18.510
18.24
137.638
21.39
27.99
Pass
157
5785
18.770
18.63
148.281
21.71
27.99
Pass
165
5825
18.530
18.47
141.593
21.51
27.99
Pass
Note: Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 30-(8.01-6) =
27.99dBm.
802.11n (HT40)
Chan.
Freq.
(MHz)
Chain 0
Chain 1
Total
Power
(mW)
Maximum Conducted Power (dBm)
Total
Power
(dBm)
Power
Limit
(dBm)
Pass / Fail
38
5190
13.590
12.63
41.179
16.15
27.99
Pass
46
5230
16.720
16.34
90.042
19.54
27.99
Pass
151
5755
18.830
18.78
151.893
21.82
27.99
Pass
159
5795
19.030
19.02
159.783
22.04
27.99
Pass
Note: Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 30-(8.01-6) =
27.99dBm.
802.11ac (VHT80)
Chan.
Freq.
(MHz)
Chain 0
Chain 1
Total
Power
(mW)
Maximum Conducted Power (dBm)
Total
Power
(dBm)
Power
Limit
(dBm)
Pass / Fail
42
5210
12.220
11.53
30.896
14.90
27.99
Pass
155
5775
14.700
14.34
56.676
17.53
27.99
Pass
Note: Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 30-(8.01-6) =
27.99dBm.
Report No.: RF170307C24-1
Page No. 74 / 99
Report Format Version:6.1.1
26dB Bandwidth
802.11a
Channel
Frequency (MHz)
36
26dBc Bandwidth (MHz)
Chain 0
Chain 1
5180
19.48
19.85
40
5200
41.08
42.31
48
5240
29.59
31.30
802.11n (HT20)
Channel
Frequency (MHz)
36
26dBc Bandwidth (MHz)
Chain 0
Chain 1
5180
20.57
20.54
40
5200
38.99
44.01
48
5240
32.10
22.84
802.11n (HT40)
Channel
Frequency (MHz)
38
46
26dBc Bandwidth (MHz)
Chain 0
Chain 1
5190
39.97
40.87
5230
60.83
81.41
802.11ac (VHT80)
Channel
Frequency (MHz)
42
5210
Report No.: RF170307C24-1
26dBc Bandwidth (MHz)
Chain 0
Chain 1
81.55
83.93
Page No. 75 / 99
Report Format Version:6.1.1
Spectrum Plot of Worst Value
802.11a
802.11n (HT20)
802.11n (HT40)
802.11ac (VHT80)
Report No.: RF170307C24-1
Page No. 76 / 99
Report Format Version:6.1.1
4.4
4.4.1
Occupied Bandwidth Measurement
Test Setup
EUT
4.4.2
Attenuator
Spectrum
Analyzer
Test Instruments
Refer to section 4.1.2 to get information of above instrument.
4.4.3
Test Procedure
The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the
fundamental frequency was measured by spectrum analyzer with resolution bandwidth in the range of 1% to
5% of the anticipated emission bandwidth, and a video bandwidth at least 3x the resolution bandwidth and set
the detector to sample. The width of a frequency band such that, below the lower and above the upper
frequency limits, the mean powers emitted are each equal to a specified percentage 0.5 %of the total mean
power of a given emission.
Report No.: RF170307C24-1
Page No. 77 / 99
Report Format Version:6.1.1
4.4.4
Test Result
802.11a
Channel
Frequency (MHz)
36
Occupied Bandwidth (MHz)
Chain 0
Chain 1
5180
16.68
16.68
40
5200
21.84
24.72
48
5240
16.68
16.80
149
5745
17.04
21.12
157
5785
22.44
25.80
165
5825
28.08
30.48
802.11n (HT20)
Channel
Frequency (MHz)
36
Occupied Bandwidth (MHz)
Chain 0
Chain 1
5180
17.88
17.76
40
5200
18.72
22.20
48
5240
18.00
17.76
149
5745
18.36
21.84
157
5785
23.16
26.64
165
5825
28.68
32.52
802.11n (HT40)
Channel
Frequency (MHz)
38
Occupied Bandwidth (MHz)
Chain 0
Chain 1
5190
35.64
36.24
46
5230
36.72
36.72
151
5755
36.48
38.52
159
5795
39.48
44.28
802.11ac (VHT80)
Channel
Frequency (MHz)
42
155
Report No.: RF170307C24-1
Occupied Bandwidth (MHz)
Chain 0
Chain 1
5210
75.36
75.60
5775
75.60
76.08
Page No. 78 / 99
Report Format Version:6.1.1
Spectrum Plot of Worst Value
802.11a
802.11n (HT20)
802.11n (HT40)
802.11ac (VHT80)
Report No.: RF170307C24-1
Page No. 79 / 99
Report Format Version:6.1.1
4.5
4.5.1
Peak Power Spectral Density Measurement
Limits of Peak Power Spectral Density Measurement
Operation Band
EUT Category
LIMIT
Outdoor Access Point
U-NII-1
Fixed point-to-point Access Point

Indoor Access Point
Mobile and Portable client device
4.5.2
11dBm/ MHz
U-NII-2A
11dBm/ MHz
U-NII-2C
11dBm/ MHz
U-NII-3

30dBm/ 500kHz
Test Setup
EUT
4.5.3
17dBm/ MHz
Attenuator
Spectrum
Analyzer
Test Instruments
Refer to section 4.1.2 to get information of above instrument.
Report No.: RF170307C24-1
Page No. 80 / 99
Report Format Version:6.1.1
4.5.4
Test Procedures
For U-NII-1 band:
Duty cycle of test signal is ≥ 98%
Using method SA-1
1) Set span to encompass the entire emission bandwidth (EBW) of the signal.
2) Set RBW = 1MHz, Set VBW ≥ 3 MHz, Detector = RMS
3) Set Channel power measure = 1MHz
4) Sweep time = auto, trigger set to “free run”.
5) Trace average at least 100 traces in power averaging mode.
6) Record the max value
Duty cycle of test signal is < 98%
Using method SA-2
1) Set span to encompass the entire emission bandwidth (EBW) of the signal.
2) Set RBW = 1MHz, Set VBW ≥ 3 MHz, Detector = RMS
3) Set Channel power measure = 1MHz
4) Sweep time = auto, trigger set to “free run”.
5) Trace average at least 100 traces in power averaging mode.
6) Record the max value and add 10 log (1/duty cycle)
For U-NII-3 band:
Duty cycle of test signal is ≥ 98%
Using method SA-1
1) Set span to encompass the entire emission bandwidth (EBW) of the signal.
2) Set RBW = 300 kHz, Set VBW ≥ 1 MHz, Detector = RMS.
3) Use the peak marker function to determine the maximum power level in any 300 kHz band segment within
the fundamental EBW.
4) Scale the observed power level to an equivalent value in 500 kHz by adjusting (reducing) the measured 1)
power by a bandwidth correction factor (BWCF) where BWCF = 10log(500 kHz / 300 kHz).
5) Sweep time = auto, trigger set to “free run”.
6) Trace average at least 100 traces in power averaging mode.
7) Record the max value.
Duty cycle of test signal is < 98%
1) Set span to encompass the entire emission bandwidth (EBW) of the signal.
2) Set RBW = 300 kHz, Set VBW ≥ 1 MHz, Detector = RMS
3) Use the peak marker function to determine the maximum power level in any 300 kHz band segment within
the fundamental EBW.
4) Scale the observed power level to an equivalent value in 500 kHz by adjusting (reducing) the measured
power by a bandwidth correction factor (BWCF) where BWCF = 10log(500 kHz / 300 kHz)
5) Sweep time = auto, trigger set to “free run”.
6) Trace average at least 100 traces in power averaging mode.
7) Record the max value and add 10 log (1/duty cycle)
4.5.5
Deviation from Test Standard
No deviation.
4.5.6
EUT Operating Conditions
Same as item 4.3.6.
Report No.: RF170307C24-1
Page No. 81 / 99
Report Format Version:6.1.1
4.5.7
Test Results
For U-NII-1 Band
802.11a
Chan.
Freq.
(MHz)
PSD W/O Duty Factor
(dBm/MHz)
Chain 0
Chain 1
Duty Factor
(dB)
Total PSD
With Duty
Max. Limit
Factor
(dBm/MHz)
(dBm/MHz)
Pass /
Fail
36
5180
4.11
3.37
0.31
7.08
14.99
Pass
40
5200
9.08
7.54
0.31
11.70
14.99
Pass
48
5240
7.32
5.43
0.31
9.80
14.99
Pass
Note:
1. Method 1 of power density measurement of KDB 662911 is using for calculating total power density. Total
power density is summing entire spectra across corresponding frequency bins on the various outputs by
computer.
2. Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 17-(8.01-6) =
14.99dBm.
3. Refer to section 3.3 for duty cycle spectrum plot.
802.11n (HT20)
Chan.
Freq.
(MHz)
PSD W/O Duty Factor
(dBm/MHz)
Chain 0
Chain 1
Duty Factor
(dB)
Total PSD
With Duty
Max. Limit
Factor
(dBm/MHz)
(dBm/MHz)
Pass /
Fail
36
5180
3.82
2.52
0.15
6.38
14.99
Pass
40
5200
8.20
6.26
0.15
10.50
14.99
Pass
48
5240
4.90
7.16
0.15
9.34
14.99
Pass
Note:
1. Method 1 of power density measurement of KDB 662911 is using for calculating total power density. Total
power density is summing entire spectra across corresponding frequency bins on the various outputs by
computer.
2. Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 17-(8.01-6) =
14.99dBm.
3. Refer to section 3.3 for duty cycle spectrum plot.
802.11n (HT40)
Chan.
Freq.
(MHz)
PSD W/O Duty Factor
(dBm/MHz)
Chain 0
Chain 1
Duty Factor
(dB)
Total PSD
With Duty
Max. Limit
Factor
(dBm/MHz)
(dBm/MHz)
Pass /
Fail
38
5190
0.90
-0.52
0.47
3.73
14.99
Pass
46
5230
5.01
2.77
0.47
7.51
14.99
Pass
Note:
1. Method 1 of power density measurement of KDB 662911 is using for calculating total power density. Total
power density is summing entire spectra across corresponding frequency bins on the various outputs by
computer.
2. Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 17-(8.01-6) =
14.99dBm.
3. Refer to section 3.3 for duty cycle spectrum plot.
Report No.: RF170307C24-1
Page No. 82 / 99
Report Format Version:6.1.1
802.11ac (VHT80)
Chan.
42
Freq.
(MHz)
5210
PSD W/O Duty Factor
(dBm/MHz)
Chain 0
Chain 1
-3.74
-4.84
Duty Factor
(dB)
0.47
Total PSD
With Duty
Max. Limit
Factor
(dBm/MHz)
(dBm/MHz)
-0.77
14.99
Pass /
Fail
Pass
Note:
1. Method 1 of power density measurement of KDB 662911 is using for calculating total power density. Total
power density is summing entire spectra across corresponding frequency bins on the various outputs by
computer.
2. Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 17-(8.01-6) =
14.99dBm.
3. Refer to section 3.3 for duty cycle spectrum plot.
Spectrum Plot of Worst Value
802.11a / Chain 0 / CH 40
802.11n (HT20) / Chain 0 / CH 40
802.11n (HT40) / Chain 0 / CH 46
Report No.: RF170307C24-1
802.11ac (VHT80) / Chain 0 / CH 42
Page No. 83 / 99
Report Format Version:6.1.1
For U-NII-3 Band
802.11a
TX
chain
Chan.
Freq.
(MHz)
PSD W/O Duty Factor
(dBm/300kHz)
(dBm/500kHz)
10 log Duty Factor
(N=2) dB
(dB)
Total PSD With
Duty Factor
(dBm/500kHz)
Limit
Pass /
(dBm/500kHz)
Fail
149
5745
-0.64
1.58
3.01
0.31
4.90
27.99
Pass
157
5785
-0.74
1.48
3.01
0.31
4.80
27.99
Pass
165
5825
-0.59
1.63
3.01
0.31
4.95
27.99
Pass
149
5745
-1.12
1.10
3.01
0.31
4.42
27.99
Pass
157
5785
-1.07
1.15
3.01
0.31
4.47
27.99
Pass
165
5825
-0.82
1.40
3.01
0.31
4.72
27.99
Pass
Note:
1. Method 1 of power density measurement of KDB 662911 is using for calculating total power density. Total
power density is summing entire spectra across corresponding frequency bins on the various outputs by
computer.
2. Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 30-(8.01-6) =
27.99.
3. Refer to section 3.3 for duty cycle spectrum plot.
802.11n (HT20)
TX
chain
Chan.
Freq.
(MHz)
PSD W/O Duty Factor
(dBm/300kHz)
(dBm/500kHz)
10 log Duty Factor
(N=2) dB
(dB)
Total PSD With
Duty Factor
(dBm/500kHz)
Limit
Pass /
(dBm/500kHz)
Fail
149
5745
-1.41
0.81
3.01
0.15
3.97
27.99
Pass
157
5785
-1.82
0.40
3.01
0.15
3.56
27.99
Pass
165
5825
-1.56
0.66
3.01
0.15
3.82
27.99
Pass
149
5745
-1.60
0.62
3.01
0.15
3.78
27.99
Pass
157
5785
-1.22
1.00
3.01
0.15
4.16
27.99
Pass
165
5825
-1.07
1.15
3.01
0.15
4.31
27.99
Pass
Note:
1. Method 1 of power density measurement of KDB 662911 is using for calculating total power density. Total
power density is summing entire spectra across corresponding frequency bins on the various outputs by
computer.
2. Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 30-(8.01-6) =
27.99.
3. Refer to section 3.3 for duty cycle spectrum plot.
Report No.: RF170307C24-1
Page No. 84 / 99
Report Format Version:6.1.1
802.11n (HT40)
TX
chain
Chan.
Freq.
(MHz)
PSD W/O Duty Factor
(dBm/300kHz)
(dBm/500kHz)
10 log Duty Factor
(N=2) dB
(dB)
Total PSD With
Duty Factor
(dBm/500kHz)
Limit
Pass /
(dBm/500kHz)
Fail
151
5755
-3.99
-1.77
3.01
0.47
1.71
27.99
Pass
159
5795
-3.96
-1.74
3.01
0.47
1.74
27.99
Pass
151
5755
-4.35
-2.13
3.01
0.47
1.35
27.99
Pass
159
5795
-3.92
-1.70
3.01
0.47
1.78
27.99
Pass
Note:
1. Method 1 of power density measurement of KDB 662911 is using for calculating total power density. Total
power density is summing entire spectra across corresponding frequency bins on the various outputs by
computer.
2. Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 30-(8.01-6) =
27.99.
3. Refer to section 3.3 for duty cycle spectrum plot.
802.11ac (VHT80)
TX
chain
Chan.
Freq.
(MHz)
PSD W/O Duty Factor
(dBm/300kHz)
(dBm/500kHz)
10 log Duty Factor
(N=2) dB
(dB)
Total PSD With
Duty Factor
(dBm/500kHz)
Limit
Pass /
(dBm/500kHz)
Fail
155
5775
-11.89
-9.67
3.01
0.47
-6.19
27.99
Pass
155
5775
-12.10
-9.88
3.01
0.47
-6.40
27.99
Pass
Note:
1. Method 1 of power density measurement of KDB 662911 is using for calculating total power density. Total
power density is summing entire spectra across corresponding frequency bins on the various outputs by
computer.
2. Max. directional gain = 5dBi + 10log(2) = 8.01dBi > 6dBi, so the limit shall be reduced to 30-(8.01-6) =
27.99.
3. Refer to section 3.3 for duty cycle spectrum plot.
Report No.: RF170307C24-1
Page No. 85 / 99
Report Format Version:6.1.1
Spectrum Plot of Worst Value
802.11a
802.11n (HT20)
802.11n (HT40)
802.11ac (VHT80)
Report No.: RF170307C24-1
Page No. 86 / 99
Report Format Version:6.1.1
4.6
4.6.1
Frequency Stability
Limits of Frequency Stability Measurement
The frequency of the carrier signal shall be maintained within band of operation
4.6.2
Test Setup
Temperature
Spectrum Analyzer
Chamber
AC Power Supply
4.6.3
Test Procedure
a.
b.
c.
d.
The EUT was placed inside the environmental test chamber and powered by nominal AC voltage.
Turn the EUT on and couple its output to a spectrum analyzer.
Turn the EUT off and set the chamber to the highest temperature specified.
Allow sufficient time (approximately 30 min) for the temperature of the chamber to stabilize, turn the EUT
on and measure the operating frequency after 2, 5, and 10 minutes.
e. Repeat step 2 and 3 with the temperature chamber set to the lowest temperature.
f. The test chamber was allowed to stabilize at +20 degree C for a minimum of 30 minutes. The supply
voltage was then adjusted on the EUT from 85% to 115% and the frequency record.
4.6.4
Deviation from Test Standard
No deviation.
4.6.5
EUT Operating Condition
Set the EUT transmit at un-modulation mode to test frequency stability.
Report No.: RF170307C24-1
Page No. 87 / 99
Report Format Version:6.1.1
4.6.6
Test Results
Frequency Stability Versus Temp.
Operating Frequency: 5180MHz
Temp.
(℃)
Power
Supply
(Vac)
50
0 Minute
2 Minute
5 Minute
10 Minute
Measured
Frequency
(MHz)
Frequency
Drift
(%)
Measured
Frequency
(MHz)
Frequency
Drift
(%)
Measured
Frequency
(MHz)
Frequency
Drift
(%)
Measured
Frequency
(MHz)
Frequency
Drift
(%)
120
5179.9939
-0.00012
5179.9949
-0.00010
5179.9972
-0.00005
5179.9934
-0.00013
40
120
5179.9996
-0.00001
5179.9952
-0.00009
5179.9967
-0.00006
5179.996
-0.00008
30
120
5180.0044
0.00008
5180.0081
0.00016
5180.0072
0.00014
5180.0063
0.00012
20
120
5179.9978
-0.00004
5179.9958
-0.00008
5179.9985
-0.00003
5179.9971
-0.00006
10
120
5180.0231
0.00045
5180.0242
0.00047
5180.0241
0.00047
5180.024
0.00046
120
5180.0175
0.00034
5180.0204
0.00039
5180.0175
0.00034
5180.0187
0.00036
-10
120
5179.9818
-0.00035
5179.9822
-0.00034
5179.9828
-0.00033
5179.9815
-0.00036
-20
120
5179.9971
-0.00006
5179.9962
-0.00007
5179.9992
-0.00002
5179.9968
-0.00006
-30
120
5180.0048
0.00009
5180.0004
0.00001
5180.001
0.00002
5180.0046
0.00009
Frequency Stability Versus Voltage
Operating Frequency: 5180MHz
Temp.
(℃)
20
Power
Supply
(Vac)
0 Minute
2 Minute
5 Minute
10 Minute
Measured
Frequency
(MHz)
Frequency
Drift
(%)
Measured
Frequency
(MHz)
Frequency
Drift
(%)
Measured
Frequency
(MHz)
Frequency
Drift
(%)
Measured
Frequency
(MHz)
Frequency
Drift
(%)
138
5179.9982
-0.00003
5179.9958
-0.00008
5179.9991
-0.00002
5179.9975
-0.00005
120
5179.9978
-0.00004
5179.9958
-0.00008
5179.9985
-0.00003
5179.9971
-0.00006
102
5179.9983
-0.00003
5179.9954
-0.00009
5179.9992
-0.00002
5179.9975
-0.00005
Report No.: RF170307C24-1
Page No. 88 / 99
Report Format Version:6.1.1
4.7
4.7.1
6dB Bandwidth Measurement
Limits of 6dB Bandwidth Measurement
The minimum of 6dB Bandwidth Measurement is 0.5MHz.
4.7.2
Test Setup
EUT
4.7.3
Attenuator
Spectrum
Analyzer
Test Instruments
Refer to section 4.1.2 to get information of above instrument.
4.7.4
Test Procedure
MEASUREMENT PROCEDURE REF
a. Set resolution bandwidth (RBW) = 100kHz
b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak.
c. Trace mode = max hold.
d. Sweep = auto couple.
e. Measure the maximum width of the emission that is constrained by the frequencies associated with the
two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level
measured in the fundamental emission
4.7.5
Deviation from Test Standard
No deviation.
4.7.6
EUT Operating Condition
The software provided by client to enable the EUT under transmission condition continuously at lowest,
middle and highest channel frequencies individually.
Report No.: RF170307C24-1
Page No. 89 / 99
Report Format Version:6.1.1
4.7.7
Test Results
802.11a
6dB Bandwidth (MHz)
Frequency
(MHz)
Chain 0
149
5745
157
165
Channel
Pass / Fail
Chain 1
Minimum Limit
(MHz)
16.42
16.38
0.5
Pass
5785
16.41
16.39
0.5
Pass
5825
16.45
16.34
0.5
Pass
Pass / Fail
802.11n (HT20)
6dB Bandwidth (MHz)
Frequency
(MHz)
Chain 0
Chain 1
Minimum Limit
(MHz)
149
5745
17.64
17.64
0.5
Pass
157
5785
17.65
17.61
0.5
Pass
165
5825
17.66
17.65
0.5
Pass
Pass / Fail
Channel
802.11n (HT40)
6dB Bandwidth (MHz)
Frequency
(MHz)
Chain 0
Chain 1
Minimum Limit
(MHz)
151
5755
35.20
35.17
0.5
Pass
159
5795
35.18
36.34
0.5
Pass
Pass / Fail
Pass
Channel
802.11ac (VHT80)
Channel
155
6dB Bandwidth (MHz)
Frequency
(MHz)
Chain 0
Chain 1
Minimum Limit
(MHz)
5775
74.39
76.01
0.5
Report No.: RF170307C24-1
Page No. 90 / 99
Report Format Version:6.1.1
Spectrum Plot of Worst Value
802.11a
802.11n (HT20)
802.11n (HT40)
802.11ac (VHT80)
Report No.: RF170307C24-1
Page No. 91 / 99
Report Format Version:6.1.1
5
Pictures of Test Arrangements
Please refer to the attached file (Test Setup Photo).
Report No.: RF170307C24-1
Page No. 92 / 99
Report Format Version:6.1.1
Annex A- Radiated Out of Band Emission (OOBE) Measurement (For U-NII-3 band)
Test Mode A1
802.11a
CH149
Horizontal
Vertical
CH157
Horizontal
Vertical
CH165
Horizontal
Report No.: RF170307C24-1
Vertical
Page No. 93 / 99
Report Format Version:6.1.1
802.11n (HT20)
CH149
Horizontal
Vertical
CH157
Horizontal
Vertical
CH165
Horizontal
Report No.: RF170307C24-1
Vertical
Page No. 94 / 99
Report Format Version:6.1.1
802.11n (HT40)
CH151
Horizontal
Vertical
CH159
Horizontal
Vertical
802.11ac (VHT80)
CH155
Horizontal
Report No.: RF170307C24-1
Vertical
Page No. 95 / 99
Report Format Version:6.1.1
Test Mode B1
802.11a
CH149
Horizontal
Vertical
CH157
Horizontal
Vertical
CH165
Horizontal
Report No.: RF170307C24-1
Vertical
Page No. 96 / 99
Report Format Version:6.1.1
802.11n (HT20)
CH149
Horizontal
Vertical
CH157
Horizontal
Vertical
CH165
Horizontal
Report No.: RF170307C24-1
Vertical
Page No. 97 / 99
Report Format Version:6.1.1
802.11n (HT40)
CH151
Horizontal
Vertical
CH159
Horizontal
Vertical
802.11ac (VHT80)
CH155
Horizontal
Report No.: RF170307C24-1
Vertical
Page No. 98 / 99
Report Format Version:6.1.1
Appendix – Information on the Testing Laboratories
We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to
provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and
approved according to ISO/IEC 17025.
If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab
Tel: 886-2-26052180
Fax: 886-2-26051924
Hsin Chu EMC/RF/Telecom Lab
Tel: 886-3-6668565
Fax: 886-3-6668323
Hwa Ya EMC/RF/Safety Lab
Tel: 886-3-3183232
Fax: 886-3-3270892
Email: service.adt@tw.bureauveritas.com
Web Site: www.bureauveritas-adt.com
The address and road map of all our labs can be found in our web site also.
--- END ---
Report No.: RF170307C24-1
Page No. 99 / 99
Report Format Version:6.1.1
Download: EAP1300 Dual Band Indoor Access Point Test Report (NII)_rev EnGenius Technologies
Mirror Download [FCC.gov]EAP1300 Dual Band Indoor Access Point Test Report (NII)_rev EnGenius Technologies
Document ID3409267
Application IDkwBNOnAshSo0gznr3IipVA==
Document DescriptionTest Report (NII)_rev.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize70.28kB (878507 bits)
Date Submitted2017-05-31 00:00:00
Date Available2017-06-12 00:00:00
Creation Date2017-10-23 17:12:09
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-23 17:12:09
Document TitleTest Report (NII)_rev
Document CreatorPScript5.dll Version 5.2.2
Document Author: sunliu

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0f4923d8-98b1-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:04 08:41:02Z
Create Date                     : 2017:07:04 08:41:02Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:0f4923d8-98b1-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2018