89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.

Motorola Solutions, Inc. Hands Free Imager with Bluetooth Transmitter

Page 1 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 2 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 3 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 4 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 5 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 6 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 7 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 8 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 9 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 10 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 11 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 12 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 13 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 14 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Page 15 of 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.

Hands-Free
Imager
User Guide
ab
DRAFT November 30, 2004
6802976C40-O
@6802976C40@
ii
Welcome
The Hands-free Imager is a hand-warn device that enables image capturing and barcode decoding.
The Imager transmits the captured 640 x 480 pixels gray scale VGA images to a portable terminal (or
computer) with the convenience and freedom from cables and wires. Bluetooth wireless technology
makes all connections to the terminal quickly and without any cables.
All Motorola wireless products are designed and manufactured to meet Motorola’s rigorous
specifications and world-class quality standards. During development, our testing team took the
Motorola Hands-free Imager through rigorous durability tests including temperature, humidity,
shock, dust, vibration, and drop tests.
We are confident that you will find your Hands-free Imager to be a convenient and secure way to
make clear, crisp images.
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ®
Reg. U.S. Pat. & Tm. Off. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Motrola, Inc.
TrueSync is a trademark of Starfish, Inc., a wholly owned subsidiary of Motorola, Inc.
All other product or service names are the property of their respective owners.
© 2004 Motorola, Inc. All rights reserved.
iii
Contents
Safety and General Information............................................................................................................... v
Introduction............................................................................................................................................... 1
What Is Bluetooth Wireless Technology?........................................................................................... 1
What Is Included in This Kit?............................................................................................................... 1
Hands-free Imager Features..................................................................................................................... 1
Using Your Hands-free Imager................................................................................................................. 2
Charging Your Hands-free Imager ....................................................................................................... 2
Installing the Battery....................................................................................................................... 2
When to Charge .............................................................................................................................. 2
How to Charge................................................................................................................................. 2
Charger LED Indicators.................................................................................................................... 3
Wearing the Hands-free Imager .............................................................................................................. 3
Wearing the Hands-free Imager on Your Hand................................................................................... 3
Connecting the Bluetooth Link............................................................................................................. 3
Disconnecting the Bluetooth Link........................................................................................................ 3
Capturing Images or Barcode Labels ....................................................................................................... 4
Using Your Hands-free Imager Indicators................................................................................................ 5
Hands-free Imager Indicator................................................................................................................ 5
Audio Tones ......................................................................................................................................... 5
Resetting the Hands-free Imager............................................................................................................. 5
Troubleshooting........................................................................................................................................ 6
Approved Accessories .............................................................................................................................. 6
iv
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ
THIS INFORMATION BEFORE USING YOUR HANDS FREE IMAGER.
Users are not permitted to make changes or modify the device in any way. Changes or modifications
not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Electromagnetic Interference/Compatibility
Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if
inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your Hands-free Imager
in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be
using equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your Hands-free Imager when on board an aircraft. Any use of a
Hands-free Imager must be in accordance with applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches
(15 centimeters) be maintained between a handheld Hands-free Imager and a pacemaker. These
recommendations are consistent with the independent research by, and recommendations of,
Wireless Technology Research.
Persons with pacemakers should:
•
ALWAYS keep the Hands-free Imager and Bluetooth data terminal more than six inches (15
centimeters) from your pacemaker when the Hands-free Imager is turned ON.
•
NOT carry the Hands-free Imager and Bluetooth data terminal in the breast pocket.
•
Turn OFF the data terminal immediately if you have any reason to suspect that interference
is taking place.
Hearing Aids
Some digital wireless devices may interfere with some hearing aids. In the event of such
interference, you may want to consult with your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if
it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this
information.
OPERATIONAL WARNINGS
Potentially Explosive Atmospheres (Explosive atmospheres refers
to hazard classified locations that may contain hazardous gas,
vapors, or dusts.)
Turn off your wireless device prior to entering any area with a potentially
explosive atmosphere, unless it is a wireless device type especially
qualified for use in such areas as "Intrinsically Safe" (for example, Factory
Mutual, CSA, UL, CENELEC or ATEX Approved). Do not remove, install, or
charge batteries in such areas. Sparks in a potentially explosive atmosphere
can cause an explosion or fire resulting in bodily injury or even death.
The areas with potentially explosive atmospheres referred to above include
fuelling areas such as below decks on boats, fuel or chemical transfer or
storage facilities, areas where the air contains chemicals or particles, such
as grain, dust or metal powders. Areas with potentially explosive
atmospheres are often but not always posted.
Blasting Caps And Blasting Areas
To avoid possible interference with blasting operations, turn off your
wireless device when you are near electrical blasting caps, in a blasting
area, or in areas posted: "Turn off two- way radio". Obey all signs and
instructions.
vi
Accessory Safety Information
IMPORTANT: SAVE THESE ACCESSORY SAFETY INSTRUCTIONS
•
Before using any battery or battery charger, read all the instructions for and cautionary
markings on (1) the battery, (2) the battery charger, which may include a separate power
supply or transformer, and (3) the wireless device using the battery.
•
Do not expose any battery charger to water, rain, or snow.
Do not replace or change accessories in a hazardous atmosphere. Contact
sparking may occur while installing or removing accessories and cause an
explosion or fire.
OPERATIONAL CAUTION
Batteries
All batteries can cause property damage and / or bodily injury such as burns
if a conductive material such as jewellery, keys, or beaded chains touch
exposed terminals.
The conductive material may complete an electrical circuit (short circuit)
and become quite hot. Exercise care in handling any charged battery,
particularly when placing it inside a pocket, purse, or other container with
metal objects.
•
To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when
you disconnect the battery charger from the power source outlet.
•
Do not operate any battery charger with a damaged cord or plug – replace them
immediately.
•
Battery chargers may become warm during operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet immediately and discontinue its use.
•
Use of a non-recommended attachment to a battery charger may result in a risk of fire,
electric shock, or injury to persons.
•
Make sure the battery charger power cord is located so that it will not be stepped on,
tripped over, or subjected to damage or stress.
•
An extension cord should not be used with any battery charger unless absolutely necessary.
Use of an improper extension cord could result in a risk of fire and electric shock. If an
extension cord must be used, make sure that:
•
The pins on the plug of the extension cord are the same number, size, and shape as those on
the plug of the charger.
•
The extension cord is properly wired and in good electrical condition.
vii
viii
•
The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.
•
To reduce the risk of injury, charge only the rechargeable batteries listed in the Accessories
section of this manual. Other types of batteries may burst, causing personal injury and
damage.
Introduction
What Is Bluetooth Wireless Technology?
Bluetooth wireless technology drives you into a new dimension in connectivity.
Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a
globally available radio frequency to ensure worldwide compatibility.
Your Hands-free Imager can communicate with other Bluetooth devices within a range of
approximately 10 meters (33 feet).
What Is Included in This Kit?
This package includes the following:
• Hands-free Imager
• 3.6V, 780mAh Li-Ion rechargeable battery pack
• Hands-free Imager built-in finger strap
Hands Free Imager Features
1 — Multifunction Button Controls the On/Off power status of the Hands-free Imager and several
Hands-free Imager functions.
2 — Beeper beeps to indicate the imager status.
3 — Hands Free Imager Indicator light Provides visual indication about the Hands-free Imager
status.
4 — Battery Rechargeable battery that snaps into the Hands-free Imager. The battery has external
charging contacts that receives the plug from your battery charger.
5 — Hands Free Imager Window Imager lens and aiming pattern LEDs. The aiming pattern LEDs
assists you in positioning the imager lens on the target barcode, signature or object.
6 —Hand-strap Attaches Hands-free Imager to the hand, so you can wear the Hands-free Imager
around your fingers for continues work.
Using Your Hands Free Imager
Charging Your Hands Free Imager
Installing the Battery
1. Insert the battery, bottom end first, into
the battery compartment.
2. Carefully slide the battery into the Handsfree Imager until it clicks into place.
Battery
Note: The battery is charged within the
Hands-free Imager. Once installed, the battery
should not be removed from the Hands-free Imager, unless it is damaged.
When to Charge
First-Time Use — Before you can use your Hands-free Imager, you need to charge its selfcontained battery for four hours.
Recharging— When you hear five rapid high tones through the Hands-free Imager beeper,
repeated at 20-second intervals, the Hands-free Imager battery needs to be recharged.
Over extended periods of time, batteries gradually wear down and require longer charging times.
This is normal. The more you capture images with the Hands-free Imager, the less standby time your
battery has.
The rechargeable batteries that power this product must be disposed of properly and may need to be
recycled. Contact your local recycling center for proper disposal methods. Never dispose of batteries
in a fire because they may explode.
How to Charge
A fully charged Hands-free Imager
battery provides approximately:
• Image capture cycles—3000
Scans over 16 hours
• Standby time —70 hours
• Storage time—30 days
Hands-free Imager Charger
Imager Charger
3. Connect the power supply
LED Indicators
of the Hands-free Imager
Charger to the power outlet.
4. Place the Hands-free Imager into the charger, with the Hands-free Imager facing up. During
charging, the Imager Charger LED indicator turns red and remains lit until charging is
complete. Your Hands-free Imager requires approximately three hours receiving a full
charge.
5. When charging is complete (indicator turns green), remove the Hands-free Imager from the
charger.
Hands Free Imager Charger LED Indicators
LED Color
Indication
No Light
Empty battery bay
Steady red
Battery charging
Steady Green
Battery charge complete
Flashing Red & Green
Defective battery
Flashing yellow
Battery charging had stopped. Battery temperature is either too high or low.
Charging resumes once battery temperatures are within operating range.
Wearing the Hands Free Imager
Wearing the Hands Free Imager on Your
Hand
The Hands-free Imager is configured for wear on the right or left
hand.
Steps
1. Release the Finger-strap.
2. Insert your fingers into the Finger-strap.
3. Secure the straps, so the straps will not interfere with the Imager window
Connecting the Bluetooth Link
To start the Bluetooth connection between the Hands-free Imager and terminal (or computer), turn
the Hands-free Imager on by pressing the Multifunction button. Your terminal should detect the
Hands-free Imager automatically and establish communication.
Disconnecting the Bluetooth Link
To terminate the Bluetooth connection between the Hands-free Imager and terminal (or computer),
turn the Hands-free Imager off by holding the Multifunction button pressed for more than three
seconds.
Capturing Images or Barcode Labels
The Hands-free Imager houses a digital camera (Imager) that captures the most commonly used 1D
and 2D barcodes. The Hands-free Imager supports omni-directional operation for easy use in daily
work. The Imager captures digital images, such as signatures or pictures of any mail object or form.
The images are stored in the Hands-free Imager memory.
To capture an Image:
1. Aim and hold the Hands-free
2 to 9 inches
Imager at approximately 2 to 9
inches (5 to 22 cm) away from the
target.
2. Press once the Multifunction button
and aim the green line pattern light
towards the barcode symbol.
Release the button – A successful
scan will be followed by green blinks of the LED indicator and three beep sounds.
To initiate continues automatic scanning, press the Multifunction button twice – the imager
will go to automatic scanning mode and will continue to scan barcode symbols that will be
placed in front of it.
Note that, when the Hands-free Imager is held closer to the barcode the green line is shown
smaller, and larger when farther from the barcode. Barcode symbols with small elements should
be read closer to the Hands-free Imager and large elements farther from the Hands-free Imager.
To capture a barcode symbol, position the green line of light in any angle, as shown in the following
picture:
Note: When adjusting your position, you may move back and forth from the target to capture the
entire object.
Using Your Hands Free Imager Indicators
Hands Free Imager Indicator
Hands Free Imager LED Indicator
Status
No light
Idle or capturing and decoding
One green pulse
Successful scan indication
Blinks Yellow
B.T disconnected
One red pulse
Unsuccessful scan host indication
One red pulse
B.T disconnecting
Steady Yellow
B.T is connecting
Three red pulses
No host acknowledge
Audio Tones
Audio Tone Hands Free Imager Status
Hands Free Imager Tone Indication
Status
1 beep
B.T connect
2 beeps
B.T disconnecting
3 beeps
Successfully scan host indication
4 beeps
Scan timeout
5 beeps
Unsuccessful scan Host indication
6 beeps
No host acknowledge
Resetting the Hands Free Imager
If the Hands-free Imager fails to communicate, you may need to reset the Hands-free Imager.
Step
1. Plug the Hands-free Imager into the charger.
2. Wait 5 seconds.
3. Detach the Hands-free Imager from the charger.
Note: Resetting the Hands-free Imager does not affect paired links or device data.
Troubleshooting
Whenever there is a problem, check the battery, power cable, and other physical items that might be
loose, disconnected, or failing. It is also possible, though unlikely, that Hands-free Imager or charger,
which once was operative, might become damaged.
In the case of charger operation failure, power supply is properly connected, and no physical item is
visible, it is recommended to reset charger by unplugging the power supply, waiting a few second,
and re-plugging it.
Defective battery - In this case try a different Hands-free Imager that once worked properly, if
problem is solved, the Hands-free Imager has bad battery.
Approved Accessories
Accessory
Part Number
Battery
FNN7816A
Finger-strap
4202196C16
Hands-free Imager Charger
F3143A
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other
product or service names are the property of their respective owners. The Bluetooth trademarks
are owned by their proprietor and used by Motorola, Inc. under license. (C) Motorola, Inc. 2002.
Download: 89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Mirror Download [FCC.gov]89FT7012 Hands Free Imager with Bluetooth Transmitter User Manual Welcome Motorola Solutions, Inc.
Document ID500193
Application IDvrJnHgiCaJq9v5uKKNPnbg==
Document DescriptionExhibit 8 Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize32.79kB (409867 bits)
Date Submitted2004-12-22 00:00:00
Date Available2004-12-22 00:00:00
Creation Date2004-11-30 11:52:51
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2004-12-16 12:39:13
Document TitleWelcome
Document CreatorMicrosoft Word 10.0
Document Author: Ofer Salman

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2004:12:16 12:39:13-05:00
Create Date                     : 2004:11:30 11:52:51Z
Page Count                      : 15
Page Mode                       : UseNone
Producer                        : Acrobat Distiller 4.05 for Windows
Mod Date                        : 2004:12:16 12:39:13-05:00
Author                          : Ofer Salman
Creation Date                   : 2004:11:30 11:52:51Z
Metadata Date                   : 2004:12:16 12:39:13-05:00
Creator                         : Ofer Salman
Title                           : Welcome