A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.

Apple Inc. Tablet Device

Page 1 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 2 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 3 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 4 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 5 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 6 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 7 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 8 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 9 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 10 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 11 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 12 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 13 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 14 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 15 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 16 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 17 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 18 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 19 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 20 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 21 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 22 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 23 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 24 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 25 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 26 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 27 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 28 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 29 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 30 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 31 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 32 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 33 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 34 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 35 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 36 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 37 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 38 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 39 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 40 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 41 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 42 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 43 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 44 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 45 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 46 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 47 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 48 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 49 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 50 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Page 51 of A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.

Calibration Laboratory of
Schmid 8t Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
s Schwelzerlscher Kalibrierdienst
' suisse d'étalonnage
0 sir are ill taratura
S SWISS Calibration Service
Accredited by the Swiss Accreditation Service (SAS) Anoredflatiort No.: 863 0108
The Swiss Accreditation service is one at the signatories to the EA
Multilateral Agreement tor the recognition or calibration certificates
Client UL CCS USA certificate No: D2450V2-899_Mar15
Object D2450V2 — SN:899
Calibration procedure(s) QA CAL-05.V9
Calibration procedure for dipole validation kits above 700 MHz
Calibration date: March 13, 2015
This calibration certificate documents the traceability to national standards, Which realize the physical units oi measurements (SI).
The measurements and the uncertainties with conlidence probability are given on the lollowmg pages and are part or the certificate.
All calibrations have been conducted in the closed laboratory lacility: environment temperature (22 1 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical lor calibration)
Primary Standards D it Cal Date (Certificate No.) Scheduled Calibration
Power meter EPM-442A GBS7480704 07>OCt-14 (No. 2‘7-02020) 001-15
Power sensor HP 3461A USS7292783 07-Oct-14 (No. 217-02020) Oct-‘5
Power sensor HP 3431A MV41092317 07-Oct»14 (No. 217-02021) Oct-15
Relerence 20 dB Attenuator SN: 5058 (20k) 031 6.111]
~20.IJI]
0 dB = 17.0 W/kg = 12.30 dBW/kg
Certificate No: D2450V2-8994Mar15 Page 5 01 B
Impedance Measurement Plot for Head TSL
13 Hal“ 2815 11=fi7=37
m 511 1 U 75 2: 54.37? :2 6.7E7B {2 43530 pH 2 450.988 680 ”Hz
in
Del
CA
av
15 g
Hld
CH2
Ca
av
15 9
Hld
sTnRT 2 259.639 aaa MHz 5m? 2 659.698 Baa MHz
Certificate No: D2450V2-899‘Mar15 Page 6 of 8
DASYS Validation Report for Body TSL
Date: 13032015
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN2899
Communication System: U11) 0 » CW; Frequency: 2450 MHz
Medium parameters used: f: 2450 MHZ; o = 2,02 S/m; & = 50.8; p = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASYS (iEEE/lEC/ANSI C63119-2011)
DASYSZ Configuration:
Probe: ESSDV3 - SN3205; ConvF(4,32, 4.32, 4.32); Calibrated: 301122014;
- Sensor-Surface: 3mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn601: Calibrated: 18.082014
0 Phantom: Flat Phantom 50 (back); Type: QDOOOPSOAA: Serial: 1002
v DASY52 52.8.8(1222):SEMCAD X 14161100331)
Dipole Calibration for Body Tissue/Pin=250 mW, d=10mleoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm dz=5rnm
Reference Value = 92.58 V/m; Power Drift: 000 dB
Peak SAR (extrapolated) = 262 W/kg
SAR(1 g) = 12.5 W/kg; SAR(10 g) = 5.76 W/kg
Maximum value of SAR (measured) = 16.2 W/kg
dB
I]
-4.l]l]
43.00
-12.l]|]
-1 6.00
-2l].l]l]
0 dB = 16.2 W/kg = 12110 dBW/kg
Certificate No: D2450V2-899‘Mar15 Page 7 of B
Impedance Measurement Plot for Body TSL
13 Mar 2915 11:97:39
m 511 1 U FS 2: 51.11? t: 7.6973 {x 599.92 pH 2 459.999 999 MHZ
/, fr— ‘\\
it
Del
CA
fiva
15
Hld
CH2
CA
flh'
159
Mid
STfiRT 2 259.999 999 MHZ STEP 2 659.999 999 MHz
Certificate No: D2450V2-899_ Mar15 Page 8 ol 5
Calibration Laboratory of ~x\‘“""""/~
. $s\ v A}, s Schweizerischer Kalibrierdienst
Schmld 8t Partner 5% C service suisse d'éialonnage
Engineering AG 3 fl 3 Servizio svtuero dl tarmura
Zeughausslrasse 43, 8004 Zurich, Switzerland 47,”?wa? 5 Swiss Calibration Service
” rrltt “
Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: 508 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client UL 008 USA Certificate No: D5GHzV2-1 003_Feb1 5
Object DSGH2V2 - SN:1003
Calibration procedure(s) QA CAL-22.v2
Calibration procedure for dipole validation kits between 3-6 GHz
Calibration date: Februaw 20, 2015
This calibration cenificale documents the traceability to national standards, which reallze lhe physical units of measurements (SI).
The measurements and the uncenainiies with confidence probability are given on the following pages and are part of the Certificate.
All calibrations have been conducted in lhe closed laboratory laciliiy: enlfironment temperalure (22 : 3)°C and humidity < 70%.
Calibration Equipment used [M&TE critical tor calibration)
Primary Standards ID tr Cal Date (Cenificale No.) Scheduled Calibrallon
Power meter EPM-MZA GB37480704 07001-14 (No, 217-02020) Oct-15
Power sensor HP 3481A USS7292733 D7>Ocl-14 (No. 217-02020] Col-15
Power sensor HP 8481A MV41092317 07-Octrl4 (No. 21742021) Oct-15
Flelerence 20 dB Attenuator SN: 5058 (20k) 03-Apr-14 (No. 217-01918) Apr-15
TypeaN mismatch combination SN: 5047.2 / 06327 oeApr-M (No. 217o1921) Apr-15
Relerenoe Probe EXSDV4 SN: 3503 30-Dec~14 (No. EX3-3503 _Dec14) Dec-15
DAE4 SN: GOl 18-Aug»14 (No. DAE4-60LAu914) Aug-15
DAE4 SN: 7B1 12»Sep»l 4 (No. DAE4-781_Sepl4) Sap-15
Secondary Standards ID at Check Date (in house) Scheduled Check
RF generator Fl&S SMT-OG 100005 MAug-QS (in house check Oct-13) In house check: Oct-is
Network Analyzer HP 375m; usavaoosss S4206 18001-01 (in house check Oct-14) In house check: Oct-i 5
Name Function Si at' r
Calibrated by: Claudio Leubler Laboratory Technician
Approved by: Kaiia Pokovic Technical Manager fly if
Issued: February 27, 2015
This calibration certificate shall not be reproduced excepl in lull wilhoui written approval of the laboratory
Certificate No: D5GHzV2-10037Feb15 Page 1 of 19
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse ‘3, 8004 Zurich, Switzerland
s Schwelzerlscher Kallbrlerdlenst
Service suisse d‘étalonnage
c Servizio svinero di taratura
5 Swiss Calibration Service
Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108
The Swiss Accreditation Service Is one of the signatories to the EA
Multilaural Agreement for the recognition of calibration certificates
Glossary:
TSL tissue simulating liquid
ConvF sensitivity in TSL/ NORM x,y,z
N/A not applicable or not measured
Calibration is Performed According to the Following Standards:
a) lEC 62209-2, “Evaluation of Human Exposure to Radio Frequency Fields from Handheld
and Body-Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to
6 GHz: Human models, Instrumentation, and Procedures"; Part 2: “Procedure to determine
the Specific Absorption Rate (SAR) for including accessories and multiple transmitter ”,
March 2010
b) KDB 865664, “SAR Measurement Requirements for 100 MHz to 6 GHZ"
c) IEEE Std 1528-2013, “IEEE Recommended Practice for Determining the Peak Spatial-
Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
Additional Documentation:
d) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
. Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate All figures stated in the certificate are valid at the frequency indicated.
- Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
. Feed Point Impedance and Fleturn Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
- Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
SAR measured: SAR measured at the stated antenna input power.
SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
. SAFI for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: D5GHzV2-1003_Feb15 Page 2 ol 19
Measurement Conditions
DASYEIstem configuration, as far as not iven oerage 1.
DASV Version DASY5 V5208
Extrapolation Advanced Extrapolation
Phantom Modular Flat Phantom V5.0
Distance Dipole Center - TSL 10 mm with Spacer
Zoom Scan Resolution
dx, dy = 4.0 mm. dz =1.4 mm
Graded Fiatio = 1.4 (Z direction)
Frequency
5200 MHZ 21 MHz
5600 MHZ 21 MHZ
5800 MHz 21 MHz
Head TSL parameters at 5200 MHz
The following parameters and calculations were applied.
Yemperature Permittivity Conductivity
Nominal Head TSL parameters 22.0 “C 36.0 4.66 mho/m
Measured Head TSL parameters (22.0 2 0.2) “C 35.4 2 6 % 4.54 mho/m : 6 °/o
Head TSL temperature change during test < 0.5 0C ---- ----
SAR result with Head TSL at 5200 MHz
SAR averaged over 1 cm“ (1 g) of Head TSL Condition
SAR measured 100 mW input power 7.67 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
76.4 W/kg x 19.9 °/. (k=2)
SAFl averaged over 10 cm’ (10 g) of Head TSL
condition
SAR measured
100 mW input power
2.20 W/kg
SAFi ior nominal Head TSL parameters
normalized to 1W
21.9 W/kg 2 19.5 °/. (k=2)
Certificate No: D5GHZV2-10037Feb15
Page 8 oi 19
Head TSL parameters at 5600 MHz
The following parameters and calculations were applied.
Temperature Permittivity Conductivity
Nominal Head TSL parameters 220 °C 35.5 5.07 mho/m
Measured Head TSL parameters (22.0 x 0.2) °C 34.8 1 6 % 4.94 mho/m 1 B %
Head TSL temperature change during test < 0.5 “C --—- ----
SAH result with Head TSL at 5600 MHz
SAFl averaged over 1 cm3 (1 g) of Head TSL Condition
SAR measured 100 mW input power 800 W/kg
SAR for nominal Head TSL parameters normalized to 1W 79.6 Wlkg :19.9 % (k=2)
SAR averaged over 10 cm° (10 g) of Head TSL condition
SAFi measured 100 mW input power 229 W/kg
SAR for nominal Head TSL parameters normalized to 1W 22.8 W/kg : 19.5 % (k=2)
Head TSL parameters at 5800 MHz
The followindparameters and calculations were applied.
Temperature Permittivity Conductivity
Nominal Head YSL parameters 22.0 ”C 35.3 5.27 mho/m
Measured Head TSL parameters (22.0 1 0.2) “C 34.5 x 6 % 5.15 mho/m 1 6 %
Head TSL temperature change during test < 0.5 0C —--- ----
SAR result with Head TSL at 5800 MHz
SAR averaged over 1 cm3 (1 g) 01 Head TSL Condition
SAR measured 100 mW input power 7.65 W/kg
SAR for nominal Head TSL parameters normalized to 1W 76.1 Wlkg : 19.9 % (k=2)
SAR averaged over 10 em’ (10 g) of Head YSL condition
SAR measured 100 mW input power 2.18 W/kg
SAR lor nominal Head TSL parameters normalized to 1W 21.7 W/kg 2 19.5 % (k=2)
Certificate No: D5GHzV2-10037Feb15 Page 4 of 19
Body TSL parameters at 5200 MHz
The followflparameters and calculations were applied.
Temperature Permittivity Conductivity
Nominal Body TSL parameters 22.0 “C 49.0 5.30 mho/m
Measured Body TSL parameters (22.0 1 0.2) °C 48.5 1 6 % 5.46 mho/m x 6 °/o
Body TSL temperature change during test < 0.5 °C - -»--
SAR result with Body TSL at 5200 MHz
SAR averaged over 1 cm“ (1 9) 01 Body TSL Condition
SAFl measured
SAFl for nominal Body TSL parameters
100 mW input power
normalized to 1W
72.7 W/kg x 19.9 % (k=2)
7.2a W/kg
SAR averaged over 10 cm3 (10 g) of Body TSL condition
SAR measured 100 mW input power 204 W/kg
SAR ior nominal Body TSL parameters normalized to 1W 20.4 Wlkg : 19.5 % (k=2)
Body TSL parameters at 5600 MHz
The following parameters and calculations were applied.
Temperature Permittivity Conductivity
Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m
Measured Body TSL parameters (22.0 x 0.2) “C 47.7 2 6 % 5.99 mho/m 1 6 %
Body TSL temperature change during test < 0.5 °C -»-- ----
SAR result with Body TSL at 5600 MHz
SAR averaged over 1 cm“ (1 g) at Body TSL Condition
SAFl measured
100 mW input power
771 W/kg
SAFl lor nominal Body TSL parameters
normalized to 1W
77.0 W/kg : 19.9 % (k=2)
SAR averaged over 10 cm’ (10 g) of Body TSL
condition
SAFl measured
100 mW input power
2.14 W/kg
SAR for nominal Body TSL parameters
normalized to 1W
21.3 W/kg 2 19.5 % (k=2)
Certificate No: DSGHzV2-10037Feb15
Page 5 01 19
Body TSL parameters at 5800 MHz
The following parameters and calculations were applied.
Temperature Perminivity Conductivity
Nominal Body TSL parameters 22.0 °C 43.2 6.00 mho/m
Measured Body TSL parameters (22.0 1 0.2) 0C 47.4 x 6 % 6.28 mho/m t 6 °/o
Body TSL temperature change during test < 0.5 °C ---- ----
SAR result with Body TSL at 5800 MHz
SAR averaged over 1 cm“ (1 g) of Body TSL Condition
SAR measured 100 mW input power 7.51 W/kg
SAR tor nominal Body TSL parameters
normalized to 1W
75.0 W/kg , 19.9 % (k=2)
SAR averaged over 10 cm“ (10 g) of Body TSL
condition
SAR measured
100 mW input power
2.07 W/kg
SAR for nominal Body TSL parameters
normalized to 1W
20.6 Wlkg x 19.5 % (k=2)
Certificate No: DSGHzV2-10037Feb15
Page 6 of 19
Appendix (Additional assessments outside the scope of $68 0108)
Antenna Parameters with Head TSL at 5200 MHz
Impedance, transformed to feed point 48.3 9 - 9.4 in
Return Loss - 20.3 dB
Antenna Parameters with Head TSL at 5600 MHz
Impedance. transformed to feed point 54.4 9 - 32 j!)
Return Loss - 25.6 dB
Antenna Parameters with Head TSL at 5800 MHz
Impedance. transformed to feed point 56.1 Q - 75 in
Return Loss - 20.8 dB
Antenna Parameters with Body TSL at 5200 MHz
Impedance, transformed to lead point 48.1 $2 - 7.4 jQ
Return Loss - 22.2 dB
Antenna Parameters with Body TSL at 5600 MHz
Impedance, transformed to feed point 54.9 9 - 1.519
Return Loss - 262 dB
Antenna Parameters with Body TSL at 5800 MHz
Impedance, transformed to feed point 57.4 Q - 5.6 if:
Return Loss - 21.2 dB
General Antenna Parameters and Design
Electrical Delay (one direction) 1,205 ha
After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small and caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions' paragraph. The SAR data are not affected by this change, The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the
leedpoint may be damaged.
Additional EUT Data
Manufactured by
SPEAG
Manufactured on
July 08. 2003
Certificate No: DSGHzV2-10037Feb15
Page 7 of 19
Appendix (Additional assessments outside the scope of SCS 0108)
Measurement Conditions (i=5200 MHz)
DASY system configuration, as far as not iven on page 1 and 3.
Phantom
SAM Head Phantom
SAR result with SAM Head (Top)
SAR averaged over 1 cm: (1 g) of Head TSL
Condition
SAR measured
100 mW input power
8.19 W/kg
SAR tor nominal Head TSL parameters
normalized to 1W
81.9 Wlkg : 20.3 °/o (k=2)
SAR averaged over 10 cm“ (10 g) of Head TSL
condition
SAFt measured
100 mW input power
2.2a W/kg
SAFl for nominal Head TSL parameters
normalized to 1W
22.8 Wlkg : 19.9 °/o (k=2)
SAR result with SAM Head (Mouth)
SAR averaged over 1 cm’ (1 g) at Head YSL
Condition
SAR measured
100 mW input power
8.65 W/kg
SAR tor nominal Head TSL parameters
normalized to 1W
86.5 W/kg 2 20.3 % (k=2)
SAR averaged over 10 cmJ (10 g) of Head TSL
condition
SAR measured
100 mW input power
2.57 W/kg
SAR tor nominal Head TSL parameters
normalized to 1W
25.7 Wlkg : 19.9 "/9 (k=2)
SAR result with SAM Head (Neck)
SAR averaged over 1 cm“ (1 g) of Head TSL
Condition
SAFl measured
100 mW input power
3.34 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
33.4 Wlkg : 20.3 % (k=2)
SAR averaged over 10 em3 (10 g) of Head TSL
condition
SAR measured
100 mW input power
2.2a W/kg
‘_SAR for nominal Head TSL parameters
normalized to 1W
22.8 Wlkg : 19.9 °/o (k=2)
SAR result with SAM Head (Ear)
SAFl averaged over 1 cm’ (1 g) of Head TSL Condition
SAR measured 100 mW input power 508 W/kg
SAR for nominal Head TSL parameters normalized to 1W 50.8 W/kg : 20.3 % (k=2)
SAFl averaged over 10 cm3 (10 9) ol Head TSL condition
SAFl measured 100 mW input power 1.71 W/kg
SAFl tor nominal Head TSL parameters
normalized to 1W
17.1 Wlkg $19.9 °/. (k=2)
Certificate No: DSGHzV2-10037Feb15
Page 8 oi 19
Appendix (Additional assessments outside the scope of SOS 0108)
Measurement Conditions (i=5800 MHz)
DASY system configuration, as tar as not iven on page 1 and 3.
Phantom
SAM Head Phantom
SAR result with SAM Head (Top)
SAR averaged over 1 cm‘ (1 g) of Head TSL
Condition
SAR measured
J 100 mW input power
8.22 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
22.0 W/kg , 20.3 % (k=2)
SAFl averaged over 10 cm“ (10 g) at Head TSL
condition
SAR measured
100 mW input power
2.25 W/kg
SAFl tor nominal Head TSL parameters
normalized to 1W
22.4 Wlkg 219.9 % (k=2)
SAFl result with SAM Head (Mouth)
sAFl averaged over 1 cm’ (1 g) of Head TSL
Condition
SAFE measured
100 mW input power
9.15 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
91.4 Wlkg : 20.3 °/. (k=2)
SAR averaged over 10 em“ (10 g) of Head TSL
condition
SAR measured
100 mW input power
2.62 W/kg
SAR tor nominal Head TSL parameters
normalized to 1W
26.1 Wlkg g 19.9 % (k=2)
SAFl result with SAM Head (Neck)
SAR averaged over 1 cm“ (1 9) at Head TSL
Condition
SAFl measured
100 mW input power
8.44 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
34.2 W/kg 2 20.3 % (k=2)
SAR averaged over 10 cmJ (10 g) 01 Head TSL
condition
SAFl measured
100 mW input power
2.25 W/kg
SAFl for nominal Head TSL parameters
normalized to 1W
22.4 W/kg : 19.9 °/o (k=2)
SAFl result with SAM Head (Ear)
SAFI averaged over 1 cm8 (1 g) of Head TSL
Condition
SAR measured
100 mW input power
5.26 W/kg
SAFl for nominal Head TSL parameters
normalized to 1W
52.5 Wlkg : 20.3 % (k=2)
SAH averaged over 10 cm“ (10 g) of Head TSL
condition
SAR measured
100 mW input power
1.74 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
17.4 Wlkg : 19.9 °/. (k=2)
Certificate No: DSGHzV2-10037Feb15
Page 9 ol 19
DASVS Validation Report for Head TSL
Date: 17.02.2015
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole SGHz; Type: DSGHZVZ; Serial: DSGHzVZ - SN: 1003
Communication System: ULDO- CW: Frequency: 5200 MHZ. Frequency: 5600 MHZ Frequency: 5800 MHZ
Medium parameters used: f: 5200 MHz; 6: 4 54 S/m; er- — 35. 4: p— — 1000 kg/ms. Medium parameters
used: f: 5600 MHz; 6: 4 94 S/m; 3sr= 34 8; p- — 1000 kg/ms. Medium parameters used: f: 5800 MHz: 6- —
5.15 S/m; 5,: 34.5; p: 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASYS (IEEE/IEC/ANSIC63.19»2011)
DASY52 Configuration:
0 Probe: EX3DV4 - SN3503; ConvF(5.51, 5.51, 5:51); Calibrated: 30.12.2014, Com/H492, 4.92,
4.92); Calibrated: 30.12.2014, ConvF(4.9. 4:9, 49); Calibrated: 30.12.2014:
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn601; Calibrated: 18:08.2014
:- Phantom: Flat Phantom 5.0 (front); Type: QDOOOPSOAA; Serial: 1001
- DASYSZ 528.8(1222); SEMCAD X 14.6.10(7331)
Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, f=5200 MHz/Zoom Scan,
dist=l.4mm (8X8X7)/Cube 0: Measurement grid: dx=4mrn, dy=4mm. dz=l.4mm
Reference Value = 63.88 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 27.7 W/kg
SAR(1 g) = 7.67 W/kg; SAR(10 g) = 2.2 W/kg
Maximum value of SAR (measured): 17.8 W/kg
Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, f=5600 MHz/Zoom Scan,
dist=l.4mm (8X8X7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 63.33 V/m; Power Drift: 0.05 dB
Peak SAR (extrapolated) = 31.4 W/kg
SAR(1 g) = 8 W/kg; SAR(10 g) = 2.29 W/kg
Maximum value of SAR (measured) = 19.2 Wlkg
Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, f=5800 MHz/Zoom Scan,
dist=l.4mm (8X3X7)/Cube 0: Measurement grid: dx=4mm, dy=4mm. dz=1.4mrn
Reference Value = 60.62 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 31.3 W/kg
SAR(1 g) = 7.65 W/kg; SAR(10 g) = 2.18 W/kg
Maximum value of SAR (measured) = 18.7 W/kg
Certificate No: DSGHZV2-10037Feb15 Page 10 of 19
*1 0.00
-2l].l]l]
-3l].l]l]
40.00
50.00
0 dB = 17.8 W/kg =12.50 dBW/kg
Ceni'icate No: DSGHZV2-10037Feb15 Page 11 0! 19
Impedance Measurement Plot for Head TSL
m 511 1 U FS 1143.W59 -5.39450 3.2579 pF
Del
Cor
CH2 1 L 6 5 dE/REF
-20 dB
15 Feb 2am 11:28:29
5 200.000 000 MHZ
STfiRT 5 000.000 000 MHZ
STOP 5 000.090 000 "H:
CH1. Markers
2: 54.391 fl
CH2 Mark ers
2-25.53? dB
5.50000 6H2
3:.20.798 dB
5.80000 8H1
Certificate No: D5GHzV2—10037Feb15
Page120f19
DASY5 Validation Report for Body TSL
Date: 16.02.2015
Test Laboratory: SPEAG. Zurich, Switzerland
DUT: Dipole SGHz; Type: DSGHZVZ; Serial: DSGHzVZ - SN21003
Conununication System: ULD 0- CW; Frequency: 5200 MHz Frequency: 5600 MHz Frequency. 5800 MHZ
Medium parameters used: f= 5200 MHZ: 6: 5.46 S/rn; 5,: 48 5; p- — 1000 kglm3, Medium parameters
used: f: 5600 MHz; 6: 5 99 S/m;3 5,: 47 7; p- — 1000 kg/m3, Medium parameters used: f: 5800 MHz; <5— —
6.28 S/m; 3,: 47.4; p— — 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASYS (IEEE/[EC/ANSIC63.19-2011)
DASY52 Configuration:
. Probe: EX3DV4 — SN3503; ConvF(4.95, 4.95, 4.95); Calibrated: 30.12.2014. ConvF(4.35, 4.35.
4.35); Calibrated: 30.12.2014, ConvF(4.32, 4,32, 4.32): Calibrated: 30.12.2014;
0 Sensor»Surface: 1.4mm (Mechanical Surface Detection)
. Electronics: DAE4 Sn601; Calibrated: 18.08.2014
. Phantom: Flat Phantom 5.0 (hack): Type: QDOOOPSOAA: Serial: 1002
c DASY52 52.380222); SEMCAD X 14.6.10(733l)
Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, f=5200 MHz/Zoom Scan,
dist=1.4mm (3X8X7)/Cube 0: Measurement grid: dx=4mrn, dy=4rnm. dz=1.4mm
Reference Value = 57.44 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 28.5 W/kg
SAR(l g) = 7.28 W/kg; SAR(10 g) = 2.04 W/kg
Maximum value of SAR (measured) = 17.0 W/kg
Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, f=5600 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm.dz=1.4rnrn
Reference Value = 56.58 V/m; Power Drift: 0.05 dB
Peak SAR (extrapolated) = 34.0 W/kg
SAR(l g) = 7.71 W/kg; SAR(10 g) = 2.14 W/kg
Maximum value of SAR (measured) = 18.9 W/kg
Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, f=5800 MHz/Zoom Scan,
dist=l.4ml‘n (8X8X7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 54.74 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 34.9 W/kg
SAR(l g) = 7.51 Wlkg; SAR(10 g) = 2.07 W/kg
Maximum value of SAR (measured) = 18.7 W/kg
Certificate No: D5GHzV2-1003_Feb15 Page 13 01 19
*1 0.00
-2|].|]l]
-3l!.l]l]
-4|].l]l]
-5l].l]|]
0 dB = 17.0 W/kg = 12.30 dBW/kg
Certificate No: DSGHzV2-10037Feb15 Page 14 of 19
Impedance Measurement Plot for Body TSL
16 Feb 2015 11127243
m 511 1 U FS 1: 48.135 9 -?.3730 :1 4.1512 pF 5 200.000 000 MHZ
/,r'r\ \\
CMi Markers
21 54.514 9
Del
Cor
flv
16 9
HM \
CH2 811 L06
CH2 Mark ers
0 21-26312 dB
or 5.60000 6H1
3=-21.23$ dB
5.80000 EH2
we |
16
Mid
Certificate No: D5GHzV2-1003_Feb15 Page 15 of 19
DASY5 Validation Report for SAM Head
Date: 20.02.2015
Test Laboratory: SPEAG. Zurich, Switzerland
DUT: Dipole SGHz; Type: D5GHzV2; Serial: DSGHzVZ - SN: 1003
Communication System: U11) 0 - CW; Frequency: 5200 MHz
Medium parameters used: f: 5200 MHz; 6 = 4.51 S/m; e, = 36.1; p = 1000 kym3
Measurement Standard: DASY5 (lEEE/[EC/ANSI C63.19-2011)
DASYSZ Configuration:
. Probe: EX3DV4 - SN3503; ConvF(5.51, 5.51, 5.51); Calibrated: 30.12.2014;
. Sensor—Surface: 1.4mm (Mechanical Surface Detection)
. Electronics: DAE4 Sn781; Calibrated: 12.09.2014
. Phantom: SAM Head
0 DASY52 523.8(1222); SEMCAD X 14.6r10(733l)
SAM Head/Top/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm. dz=1.4mm
Reference Value = 75.18 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 29.0 W/kg
SAR(1 g) = 8.19 Wlkg; SAR(10 g) = 2.28 Wlkg
Maximum value of SAR (measured) = 19.5 W/kg
SAM Head/Mouth/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm. dy=4mm. dz=1.4mm
Reference Value = 75.24 V/rn; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 24.2 W/kg
SAR(1 g) = 8.65 Wlkg; SAR(10 g) = 2.57 W/kg
Maximum value of SAR (measured) = 20.9 Wlkg
SAM Healeeck/Zoom Scan (8X8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4rrim
Reference Value = 75.46 V/m: Power Drift = 0.08 dB
Peak SAR (extrapolated) = 29.4 W/kg
SAR(1 g) = 8.34 W/kg; SAR(10 g) = 2.28 W/kg
Maximum value of SAR (measured) = 20.2 W/kg
SAM Head/Ear/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 57.51 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 16.7 W/kg
SAR(1 g) = 5.08 Wlkg; SAR(10 g) = 1.71 Wlkg
Maximum value of SAR (measured) = 11.1 W/kg
Certificate No: D5GHzV2-1003_Feb15 Page 16 ol 19
-3.!JD
VBJJIJ
-1 2.00
-1 5.00
0 dB = [9,5 W/kg = 12.90 dBW/kg
Certificate No: DSGHzV2-1003‘Feb1 5 Page 17 of 19
DASY5 Validation Report for SAM Head
Date: 20.02.2015
Test Laboratory: SPEAG, Zurich. Switzerland
DUT: Dipole SGHz; Type: DSGHZVZ; Serial: DSGHzVZ - SN: 1003
Communication System: UID 0 — CW; Frequency: 5800 MHZ
Medium parameters used: f= 5800 MHz: 6 = 5.19 S/m; e, = 35; p = 1000 kg/m3
Measurement Standard: DASYS (lJEEE/[EC/ANSIC63.19»2011)
DASY52 Configuration:
0 Probe: EX3DV4 - SN3503; C0nvF(4.9, 4.9, 4.9); Calibrated: 30.12.2014;
o Sensor-Surface: 1.4mm (Mechanical Surface Detection)
0 Electronics: DAE4 $11781; Calibrated: 12.09.2014
. Phantom Type: SAM Head
. DASYSZ 52.830222): SEMCAD X 14,6.10(7331)
SAM Head/Top/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 72.71 V/m; Power Drift = -0.00 dB
Peak SAR (extrapolated) = 33.9 W/kg
SAR(l g) = 8.22 W/kg; SAR(10 g) = 2.25 Wlkg
Maximum value of SAR (measured) = 20.6 W/kg
SAM Head/Mouth/Zoom Scan (8X8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4m.m
Reference Value = 72.97 V/m; Power Drift: -0.03 dB
Peak SAR (extrapolated) = 29.7 W/kg
SAR(l g) = 9.16 W/kg; SAR(10 g) = 2.62 W/kg
Maximum value of SAR (measured) = 22.2 W/kg
SAM Head/Neck/Zoom Scan (8X3X7)/Cllbe 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 73:27 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 34.7 W/kg
SAR(l g) = 8.44 W/kg; SAR(10 g) = 2.25 Wlkg
Maximum value of SAR (measured) = 21.8 W/kg
SAM Head/Ear/Zoom Scan (8X8X7)/ Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 55.95 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 20.0 W/kg
SAR(l g) = 5.26 W/kg; SAR(10 g) = 1.74 Wlkg
Maximum value of SAR (measured) = 12.2 W/kg
Certificate No: D5GHZV2-10087Feb15 Page 18 of 19
3.00
{.00
-9.l]l1
-12.[l[l
>15.fll]
0 dB = 20.6 W/kg = 13.14 dBW/kg
Cenifica‘e N0: D5GHZV2-1003_Feb15 Page 19 of 19
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasee 48, 8004 Zurich, Switzerland
Schweizlerlschet Kalibiierdienst
Service suisse d'étaloimage
Serleio svizzuo di ieratura
Swiss calibration Service
Accrediled by the Swiss Accreditation Service (SAS) Accreditation No.: 565 108
The Swiss Accreditation Service Is one of the signatories to tile EA
Multilateral Agreement ior the recognition oi calibration cenlilcams
Client UL CCS USA Certificate No: DSGHzV2-1168_Dec14
Obleci D5GHZV2 - SN:1168
Calibration piocedure(s) QA CAL-22.V2
Calibration procedure for dipole validation kits between 3-6 GHz
Calibration date: December 04, 2014
This calibration cenliicate documents lhe lraceabiliiy to national standards, which realize the physical units oi measurements (3n.
The measurements and the uncertainties with confidence probability are given on the loliowing pages and are part oi the certificate.
All calibrations have been conducted in the closed laboratory iaciliiy: environment temperature (22 : 3)°C and humidity < 70%.
Calibration Equipment used (M [E critical lor calibration)
Priman/ Standards ID i: Cal Date (Certificate No.) Scheduled Calibration
Power meter EPM-442A (3537430704 mom-14 (Nos 21742020) Oct-ls
Power sensor HP 8481A Usa7292733 mom-14 (No, 217-02020) Oct-15
Power sensor HP 8481A MY41092317 07-Oct-14 (No. 2i7-02021) Oct-15
Reierence 20 dB Attenuator SN: 5053 (20k) 03-Apr-14 (No, 217-01919] Apr-15
Type-N mismatch combination SN: 50472 / 06327 03-Apr-14 (No. 217-01921) Apr»15
Fleierence Probe ESSDVS SN: 3205 some“ 3 (No. ESS-3205J3ec13) DeeiA
DAEA SN: am 18-Aug-14 (No. DAE4-60LAug14) Aug-15
Secondary Standards ID ti Check Date (in house) Scheduled Check
RF generator Fl&S smoe 100005 04-Aug-99 (in house check Oct-13) in house chec ~ ct-ls
Network Analyzer HP s753E US37390585 54206 18-Oct-01 (in house check Oct-14) In house check: Oct-15
Name Funclion Signature
Calibrated by: Jeton Kastraii Laboratory Technician * I
Approved by: Keller Pokovic Technical Manager fl?
Issued: December 3, 2014
This caiibiallon ceniilcate shall not be reproduced except in full without writlen approval oi the labomlory.
Certificate No: DSGHzV2-1168,Dec14 Page 1 oi 13
Calibration Laboratory of ~\‘“""""/~
. ‘s QJ/ z; s Schwelzeflscher Kallbrierdlenst
Schmld & Partner 33% C Service sulsse d'étalonnage
Engineering AG 2 fl 2 Servizio svizzero di taratura
laughausstrasse 43, 8004 Zunch, Swltzerland {IQ/flux) S Swiss Calibration Service
~ nlu \‘
Accredited by the Swiss Accreditation Service (SAS) Accreditation Nod: SCS 1 08
the Swiss Accredltatlon Service Is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL tissue simulating liquid
ConvF sensitivity in TSL / NORM x,y,z
N/A not applicable or not measured
Calibration is Performed According to the Following Standards:
a) lEC 62209-2, “Evaluation of Human Exposure to Radio Frequency Fields from Handheld
and Body-Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to
6 GHz: Human models, Instrumentation, and Procedures”; Part 2: “Procedure to determine
the Specific Absorption Rate (SAR) for including accessories and multiple transmitters“,
March 2010
b) KDB 865664, “SAR Measurement Requirements for 100 MHz to 6 GHz"
0) IEEE Std 1528-2013. “IEEE Recommended Practice for Determining the Peak Spatial-
Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques”, June 2013
Additional Documentation:
d) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
. Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
. Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
. Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
0 SAR measured: SAR measured at the stated antenna input power.
~ SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: DSGHzV2-1 1687Dec14 Page 2 of 13
Measurement Conditions
DASY system configuration, as far as not iven on page 1.
DASY Version DASY5 V52.8.8
Extrapolation Advanced Extrapolation
Phantom Modular Flat Phantom V5.0
Distance Dipole Center - TSL 10 mm 4 with Spacer
Zoom Scan Resolution dx, dy = 4.0 mm. dz = 1.4 mm Graded Ratio = 1.4 (2 direction)
5200 MHZ 11 MHz
Frequency 5600 MHz 1 1 MHz
5800 MHz 11 MHz
Head TSL parameters at 5200 MHz
The followingparameters and calculations were applied.
Temperature Perm ty Conductivity
Nominal Head TSL parameters 22.0 0C 36.0 4.66 rnho/m
Measured Head TSL parameters (22.0 1 0.2) °C 34.9 1 6 % j 4.59 mho/m 1 6 %
Head TSL temperature change during test < 0.5 °C ---- -—--
SAR result with Head TSL at 5200 MHz
snn averaged over 1 cm‘ (1 g) 01 Head TSL Condition
SAFi measured 100 rnW input power 7.98 W/kg
SAH for nominal Head TSL parameters normalized to 1W 79.3 W/kg x 19.9 % (k=2)
SAR averaged over 10 cm3 (10 g) at Head TSL condition 1
SAR measured 100 rnW input power 2.27 W/kg
SAFi for nominal Head TSL parameters normalized to 1w 2.5 Wlkg x 19.5 % (k=2)
Head TSL parameters at 5600 MHz
The iollowingParameters and calculations were applied.
Temperature Permittivity Conductivity
Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m
Measured Head TSL parameters (22.0 1 0.2) °C 34.3 1 6 % 4.98 mho/m 1 6 %
Head TSL temperature change during test < 0.5 °C ---- ._..
SAR result with Head TSL at 5600 MHz
SAR averaged over 1 cm’ (1 9) of Head TSL Condition
SAR measured 100 mW input power 8.24 W/kg
SAFl for nominal Head TSL parameters normalized to 1W 81.7 W / kg 1 19.9 % (k=2)
SAR averaged over 10 cm’ (10 g) 0' Head TSL condition
SAFi measured 100 rnW input power 2.34 W/kg
SAFi lor nominal Head TSL parameters normalized to 1W 23.2 Wlkg 1 19.5 % (k=2)
Certificate No: DSGHzV2-116870ec14 Page 3 oi 13
Head TSL parameters at 5800 MHz
The following parameters and calculations were applied.
Temperature Permittivity Conductivity
Nominal Head TSL parameters 22.0 ”C 35.8 5.27 mho/m
Measured Head TSL parameters (22.0 1 0.2) ”C 34.0 1 6 % 5.19 mho/m 1 6 %
Head TSL temperature change during test < 0.5 °C --—- ---—
SAR result with Head TSL at 5800 MHz
SAR averaged over 1 cm5 (1 9) 0| Head TSL Condition
SAFI measured 100 mw input power 7.87 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
73.0 W/kg :19.9 % (k=2)
SAR averaged over 10 cm“ (10 g) of Head TSL
condition
SAR measured
100 mW input power
2.2a Wfl 5 Swiss calibration Service
" lrlii \‘
Accredited by the Swiss Accreditation Sen/ice (SASl Accreditation No.: SOS 0108
The Swiss Accredimtlon Service Is one of the signatories to the EA
Mlllh‘lateral Agreement for the recognition of calibration certificates
cllent UL CCS USA oenlflcnte No: D2450V2-748_Feb15
Object D2450V2 - SNZ748
Calibration proceduretsl QA CAL-05.v9
Calibration procedure for dipole validation kits above 700 MHz
Calibration date: February 20, 2015
This calibrallon certificate documents the traceability to national standards. which realize the physical units 0i measurements (SI).
The measurements and the uncertainties Wilh confidence probabilily are given on the following pages and are pan ol the certificate
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 t 3)°C and humidity < 70%
Calibration Equipment used (MEtTE crilical for calibration)
Primary Standards ID 1‘ Cal Date (Certificate No.) Scheduled Calibration
Power meter EPM-MZA (3337450704 07-Oct-14 (Nov 217-02020) Oct-15
Power sensor HP 8431A U537292783 07-Oct-14 (No 217-02020) Oct-15
Power sensor HP 8431A MV41092317 07-Oct-14 (No 217—02021) Oct-15
Reierence 20 dB Attenuator SN: 5058 (20k) 03-Apr-14 (No. 217-01913) Apr-15
Type-N mismatch combination SN: 50472 / 06327 0&Apr—14 (No. 217—01921) Apr-15
Reference Probe ESSDVS SN: 3205 30-Dec-14 (No. ESS«3205,D9014) Dec-15
DAE4 SN: 601 18-Aug-14 (No. DAE4’SO17Aug14) Aug-15
Secondary Standards ID it Check Date (in house) Scheduled Check
RF genemtor Fl&S SMT-OG 100005 OLAug-QQ (in house check Oct-13) In house check: Oct-16
Network Analyzer HP B753E US$7390585 S4206 18-Oct-01 (in house check Oct-14) In house check: Oct-15
Name Function 3' r tur
Calibrated by: Claudio Leubler Laboratory Technician
Approved by: Katie Fokovic Technical Manager M
Issued: February 27, 2015
This calibration certificate shall not be reproduced except in full without written approval of the laboratory
Certificate No: D2450V2-74B_Feb15 Page 1 01 11
Calibration Laboratory of {aw/[,0
$ \_/ g S Schwelzerische‘r Kaiiorierdienst
Schmid & Partner m C Service sulsse d-étaionnage
Engineering AG 2 R 3 Servizio svizzero dl tarature
Zeughausstrasse 43, 8004 Zurich, Switzeriantt {Va/flat? 5 Swiss Calibration Service
’1 tilti \‘
Accredited by the Swiss Accreditation Sewice (SAS) Accreditation No.2 $08 0108
The Swiss Accreditation Service is one ol the signatories to the EA
Multilateral Agreement tor the recognition of calibration certificates
Glossary:
TSL tissue simulating liquid
ConvF sensitivity in TSL / NORM x,y,z
N/A not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, “lEEE Recommended Practice for Determining the Peak Spatial-
Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques”, June 2013
b) IEC 62209-1, “Procedure to measure the Specific Absorption Rate (SAR) for hand-held
devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)",
February 2005
c) KDB 865664, “SAR Measurement Requirements for 100 MHz to 6 GHz”
Additional Documentation:
d) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
o Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
o Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connectorto the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
0 Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
0 SAP! measured: SAR measured at the stated antenna input power.
. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
0 SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: D2450V2—7487Feb15 Page 2 cl 11
Measurement Conditions
DASY system configuration, as far as not
iven on page 1.
DASY Version DASY5 V5283
Extrapolation Advanced Extrapolation
Phantom Modular Flat Phantom
Distance Dipole Center - TSL 10 mm with Spacer
Zoom Scan Resolution dx, dy, dz = 5.0 mm
Frequency 2450 MHz t1 MHz
Head TSL parameters
The following parameters and calculations were applied.
Temperature Permittivity Conductivity
Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m
Measured Head TSL parameters (22.0 s 0.2) °C 88.2 t 6 % 1.87 mho/m 1 6 %
Head TSL temperature change during test < 0.5 °C ---- ----
SAR result with Head TSL
SAR averaged over 1 cm’ (1 g) of Head TSL Condition
SAR measured 250 mW input power 13.5 W/kg
SAFt for nominal Head TSL parameters
normalized to 1W
52.7 Wlkg : 17.0 % (k=2)
SAR averaged over 10 cm1 (10 g) of Head TSL
condition
SAFi measured
250 mW input power
623 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
24.5 Wlkg : 16.5 % (k=2)
Body TSL parameters
The followiniparameters and calculations were applied.
Temperature Permittivity Conductivity
Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m
Measured Body TSL parameters (22.0 x 0.2) ”C 51.7 2 6 % 2.04 mho/m : 6 %
Body TSL temperature change during test < 0.5 °C --—- ----
SAR result with Body TSL
SAR averaged over 1 cm1 (1 g) of Body TSL Condition
SAR measured 250 mW input power 129 W/kg
SAR for nominal Body TSL parameters
normalized to 1W
50.3 Wlkg 2 17.0 % (k=2)
SAR averaged over 10 om’ (10 g) of Body TSL
condition
SAR measured
250 mW input power
5.95 W/kg
SAFt for nominal Body TSL parameters
normalized to 1W
23.5 W/kg : 16.5 % (k=2)
Certificate No: DZ450V2-7487Feb15
Pagesat 11
Appendix (Additional assessments outside the scope of 805 0108)
Antenna Parameters with Head TSL
Impedance, transformed to feed point 54.2 n - 1.5 jn
Retum Loss - 27.4 dB
Antenna Parameters with Body TSL
Impedance, transformed to feed point 51.8 n + 0.9 19
Return Loss - 34.2 dB
General Antenna Parameters and Design
Electrical Delay (one direction) 1154 ns
After long term use with 100W radiated power. only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles. small end caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions" paragraph. The SAFi data are not affected by this change. The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the
feedpoint may be damaged.
Additional EUT Data
Manufactured by SPEAG
Manufactured on December 01, 2003
Certificate No: D2450V2-7487Feb15 Page 4 of 11
Appendix (Additional assessments outside the scope of $03 0108)
Measurement Conditions
DASY system configuration, as far as not iven on page 1 and 3.
Phantom
SAM Head Phantom
SAR result with SAM Head (Top)
SAR averaged over 1 cm3 (1 g) of Head TSL
Condition
SAFt measured
250 mW input power
13.6 W/kg
SAR for nominal Head TSL parameters
normalized to 1W
55.6 W/kg g 17.5 % (k=2)
SAR averaged over 10 cm“ (10 g) of Head TSL
condition
SAR measured
250 mW input power
6.43 W/kg
SAR lor nominal Head TSL parameters
normalized to 1W
26.1 W/kg g 15.9 °/. (k=2)
SAR result with SAM Head (Mouth)
SAR averaged over 1 cm“ (1 g) of Head TSL
Condition
SAR measured
250 mW input power
13.7 Wfl
Download: A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Mirror Download [FCC.gov]A1652 Tablet Device RF Exposure Info SAR Appendix F2 Apple Inc.
Document ID2754521
Application IDN+W2V7y+YF6YOnSXUXREGQ==
Document DescriptionSAR Appendix F2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize405.58kB (5069688 bits)
Date Submitted2015-09-19 00:00:00
Date Available2015-10-15 00:00:00
Creation Date2015-08-12 14:55:54
Producing SoftwareNuance Communications, Inc.
Document Lastmod2015-09-15 14:03:06
Document TitleSAR Appendix F2
Document CreatorNuance Communications, Inc.

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:08:12 14:55:54-07:00
Creator                         : Nuance Communications, Inc.
Keywords                        : None
Modify Date                     : 2015:09:15 14:03:06-07:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2015:09:15 14:03:06-07:00
Creator Tool                    : Nuance Communications, Inc.
Format                          : application/pdf
Document ID                     : uuid:d832a3d4-505e-4633-8c89-975f068fbd9d
Instance ID                     : uuid:698ec72d-068e-435f-9b76-752c921d0622
Producer                        : Nuance Communications, Inc.
Page Count                      : 51