1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation

Microsoft Corporation Wireless Input Device

Page 1 of 1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation
Page 2 of 1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation
Page 3 of 1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation
Page 4 of 1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation
Page 5 of 1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation
Page 6 of 1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation

Plot 1
Date/Time: 5/7/2018 8:01:21 PM
Test Laboratory: Microsoft EMC
DUT: 1836; Type: Microsoft Wireless Input Device; Serial: 02560002237814
Communication System: UID 0, CW (0); Frequency: 5260 MHz
Medium parameters used: f = 5260 MHz; σ = 5.449 S/m; εr = 47.135; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration:





Probe: EX3DV4 - SN3999; ConvF(5.1, 5.1, 5.1); Calibrated: 12/6/2017;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0
Electronics: DAE4 Sn1445; Calibrated: 11/28/2017
Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218
DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416)
Flat-Section MSL 5/7/2018 a 5260MHz Diversity Antenna Bottom 0 mm/Area Scan (9x9x1): Measurement
grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.496 W/kg
Flat-Section MSL 5/7/2018 a 5260MHz Diversity Antenna Bottom 0 mm/Zoom Scan (7x7x12)/Cube 0:
Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 10.34 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 1.11 W/kg
SAR(1 g) = 0.251 W/kg; SAR(10 g) = 0.069 W/kg
Maximum value of SAR (measured) = 0.534 W/kg
Test Report#: S‐TR136‐FCCSAR‐1
Issued: 05/23/2018
Microsoft EMC Laboratory
Page 1 of 6
Plot 2
Date/Time: 5/7/2018 7:23:45 PM
Test Laboratory: Microsoft EMC
DUT: 1836; Type: Microsoft Wireless Input Device; Serial: 02560002237814
Communication System: UID 0, CW (0); Frequency: 5640 MHz
Medium parameters used: f = 5640 MHz; σ = 5.648 S/m; εr = 47.555; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration:





Probe: EX3DV4 - SN3999; ConvF(4.37, 4.37, 4.37); Calibrated: 12/6/2017;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0
Electronics: DAE4 Sn1445; Calibrated: 11/28/2017
Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218
DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416)
Flat-Section MSL 5/7/2018 a 5640MHz Diversity Antenna Bottom 0 mm/Area Scan (9x9x1): Measurement
grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.554 W/kg
Flat-Section MSL 5/7/2018 a 5640MHz Diversity Antenna Bottom 0 mm/Zoom Scan (7x7x12)/Cube 0:
Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 11.37 V/m; Power Drift = 0.19 dB
Peak SAR (extrapolated) = 1.70 W/kg
SAR(1 g) = 0.374 W/kg; SAR(10 g) = 0.125 W/kg
Maximum value of SAR (measured) = 0.741 W/kg
Test Report#: S‐TR136‐FCCSAR‐1
Issued: 05/23/2018
Microsoft EMC Laboratory
Page 2 of 6
Plot 3
Date/Time: 5/7/2018 4:04:16 PM
Test Laboratory: Microsoft EMC
DUT: 1836; Type: Microsoft Wireless Input Device; Serial: 02560002237814
Communication System: UID 0, CW (0); Frequency: 5745 MHz
Medium parameters used: f = 5745 MHz; σ = 5.836 S/m; εr = 47.72; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration:





Probe: EX3DV4 - SN3999; ConvF(4.51, 4.51, 4.51); Calibrated: 12/6/2017;
Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0
Electronics: DAE4 Sn1445; Calibrated: 11/28/2017
Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218
DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416)
Flat-Section MSL a 5745MHz Diversity Antenna Bottom 0 mm/Area Scan (17x41x1): Measurement grid:
dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.655 W/kg
Flat-Section MSL a 5745MHz Diversity Antenna Bottom 0 mm/Zoom Scan (7x7x12)/Cube 0: Measurement
grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 12.08 V/m; Power Drift = 0.14 dB
Peak SAR (extrapolated) = 1.76 W/kg
SAR(1 g) = 0.392 W/kg; SAR(10 g) = 0.127 W/kg
Maximum value of SAR (measured) = 0.772 W/kg
Test Report#: S‐TR136‐FCCSAR‐1
Issued: 05/23/2018
Microsoft EMC Laboratory
Page 3 of 6
Plot 4
Date/Time: 5/7/2018 12:08:30 PM
Test Laboratory: Microsoft EMC
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1158
Communication System: UID 0, CW (0); Frequency: 5250 MHz
Medium parameters used (interpolated): f = 5250 MHz; σ = 5.445 S/m; εr = 47.177; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration:





Probe: EX3DV4 - SN3999; ConvF(5.1, 5.1, 5.1); Calibrated: 12/6/2017;
Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 2mm (Mechanical Surface
Detection), z = 1.0, 23.0
Electronics: DAE4 Sn1445; Calibrated: 11/28/2017
Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218
DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416)
System Verification @ 5250MHz/Pin=100mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm.
Maximum value of SAR (measured) = 9.43 W/kg
System Verification @ 5250MHz/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 34.20 V/m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 31.7 W/kg
SAR(1 g) = 7.6 W/kg; SAR(10 g) = 2.12 W/kg
Maximum value of SAR (measured) = 15.9 W/kg
Test Report#: S‐TR136‐FCCSAR‐1
Issued: 05/23/2018
Microsoft EMC Laboratory
Page 4 of 6
Plot 5
Date/Time: 5/7/2018 12:39:14 PM
Test Laboratory: Microsoft EMC
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1158
Communication System: UID 0, CW (0); Frequency: 5600 MHz
Medium parameters used: f = 5600 MHz; σ = 5.595 S/m; εr = 47.641; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration:





Probe: EX3DV4 - SN3999; ConvF(4.37, 4.37, 4.37); Calibrated: 12/6/2017;
Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 2mm (Mechanical Surface
Detection), z = 1.0, 23.0
Electronics: DAE4 Sn1445; Calibrated: 11/28/2017
Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218
DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416)
System Verification @ 5600MHz/Pin=100mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 10.2 W/kg
System Verification @ 5600MHz/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 31.67 V/m; Power Drift = 0.14 dB
Peak SAR (extrapolated) = 34.6 W/kg
SAR(1 g) = 7.87 W/kg; SAR(10 g) = 2.18 W/kg
Maximum value of SAR (measured) = 16.8 W/kg
Test Report#: S‐TR136‐FCCSAR‐1
Issued: 05/23/2018
Microsoft EMC Laboratory
Page 5 of 6
Plot 6
Date/Time: 5/7/2018 1:18:00 PM
Test Laboratory: Microsoft EMC
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1158
Communication System: UID 0, CW (0); Frequency: 5750 MHz
Medium parameters used: f = 5750 MHz; σ = 5.841 S/m; εr = 47.72; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY Configuration:





Probe: EX3DV4 - SN3999; ConvF(4.51, 4.51, 4.51); Calibrated: 12/6/2017;
Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 2mm (Mechanical Surface
Detection), z = 1.0, 23.0
Electronics: DAE4 Sn1445; Calibrated: 11/28/2017
Phantom: ELI v5.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1218
DASY52 52.10.0(1444); SEMCAD X 14.6.10(7416)
System Verification @ 5750MHz/Pin=100mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 9.36 W/kg
System Verification @ 5750MHz/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 30.49 V/m; Power Drift = 0.14 dB
Peak SAR (extrapolated) = 34.4 W/kg
SAR(1 g) = 7.49 W/kg; SAR(10 g) = 2.12 W/kg
Maximum value of SAR (measured) = 15.8 W/kg
Test Report#: S‐TR136‐FCCSAR‐1
Issued: 05/23/2018
Microsoft EMC Laboratory
Page 6 of 6
Download: 1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation
Mirror Download [FCC.gov]1836 Wireless Input Device RF Exposure Info SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1) Microsoft Corporation
Document ID3877039
Application ID8Exyyu0WybawwS3hEFM/zg==
Document DescriptionSAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1)
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize22.86kB (285789 bits)
Date Submitted2018-06-05 00:00:00
Date Available2018-06-10 00:00:00
Creation Date2018-05-23 13:31:05
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2018-05-23 13:31:38
Document TitleSAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1)
Document CreatorPScript5.dll Version 5.2.2
Document Author: sajose

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : sajose
Create Date                     : 2018:05:23 13:31:05-07:00
Modify Date                     : 2018:05:23 13:31:38-07:00
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:05:23 13:31:38-07:00
Format                          : application/pdf
Title                           : Microsoft Word - SAR Test and SAR System Verification Plots (S-TR136-FCCSAR-1)
Creator                         : sajose
Document ID                     : uuid:edf762cd-7893-4672-93d7-841829c66917
Instance ID                     : uuid:42620d77-2b2b-4ef9-97b0-19a781565dcc
Page Count                      : 6