7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated

Acer orporated 7265NGW

Page 1 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 2 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 3 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 4 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 5 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 6 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 7 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 8 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 9 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 10 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 11 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 12 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 13 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 14 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 15 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 16 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 17 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 18 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 19 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 20 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 21 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 22 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 23 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 24 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 25 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 26 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 27 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 28 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 29 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 30 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 31 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 32 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 33 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 34 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 35 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 36 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 37 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 38 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 39 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 40 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 41 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 42 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 43 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 44 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 45 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 46 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 47 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 48 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 49 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 50 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 51 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 52 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 53 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 54 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 55 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 56 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 57 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 58 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 59 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 60 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 61 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 62 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 63 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 64 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 65 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 66 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 67 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 68 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 69 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 70 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 71 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 72 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 73 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 74 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 75 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 76 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 77 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 78 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 79 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 80 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 81 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 82 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 83 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 84 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 85 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 86 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 87 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 88 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 89 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 90 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 91 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 92 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 93 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 94 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 95 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 96 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 97 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 98 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 99 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 100 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 101 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 102 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 103 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 104 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 105 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 106 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 107 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 108 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 109 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 110 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 111 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 112 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 113 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 114 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 115 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 116 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 117 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 118 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 119 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 120 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 121 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 122 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 123 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 124 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 125 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 126 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 127 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 128 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Page 129 of 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated

Report No. : E5/ 2014/ 90002
Page : 1 of 129
SAR TEST REPORT
The following samples were submitted and identified on behalf of the client as:
Equipment Under Test of Host
Brand Name
Model No. of Host
Model No. of Module
Notebook
Company Name
Company Address
Acer I ncorporated
8F., No.88, Sec. 1, Hsintai 5th Rd., Hsichih, New Taipei City
22181, Taiwan (R.O.C.)
I EEE / ANSI C95.1 , C95.3, I EEE 1528,
Standards
MS2398
7265NGW
KDB447498D01, KDB616217D04, KDB248227D01,
KDB865664D01, KDB865664D02
FCC I D
Date of Receipt
Date of Test( s)
Date of I ssue
HLZ7265NG
Sep. 15, 2014
Sep. 29, 2014 ~ Oct. 03, 2014
Oct. 21, 2014
I n the configuration tested, the EUT complied with the standards specified above.
Remarks:
This report details the results of the testing carried out on one sample, the results contained in this test
report do not relate to other samples of the same product. The manufacturer should ensure that all products in
series production are in conformity with the product sample detailed in this report.
This report may only be reproduced and distributed in full. I f the product in this report is used in any
configuration other than that detailed in the report, the manufacturer must ensure the new system complies
with all relevant standards. Any mention of SGS Taiwan Electronic & Communication Laboratory or testing
done by SGS Taiwan Electronic & Communication Laboratory in connection with distribution or use of the
product described in this report must be approved by SGS Taiwan Electronic & Communication Laboratory in
writing.
Signed on behalf of SGS
Engineer
Supervisor
Pin Chu
Date: Oct. 21, 2014
Ricky Huang
Date: Oct. 21, 2014
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 2 of 129
Version
Report Number Revision
E5/ 2014/ 90002
E5/ 2014/ 90002
00
01
Date
Memo
2014/ 10/ 09 I nitial creation of test report.
2014/ 10/ 21 1st modif ication
This test report contains a reference to the previous version test report that it
replaces.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 3 of 129
Contents
1. General I nformation ............................................................................... 4
1.1 Testing Laboratory .......................................................................... 4
1.2 Details of Applicant ......................................................................... 4
1.3 Description of EUT .......................................................................... 5
1.4 Test Environment ......................................................................... 24
1.5 Operation Description ................................................................... 25
1.6 The SAR Measurement System ...................................................... 30
1.7 System Components ..................................................................... 32
1.8 SAR System Verification ................................................................ 34
1.9 Tissue Simulant Fluid for the Frequency Band ................................. 36
1.10 Evaluation Procedures ................................................................. 38
1.11 Probe Calibration Procedures ....................................................... 39
1.12 Test Standards and Limits ........................................................... 42
2. Summary of Results ............................................................................. 44
3. Simultaneous Transmission Analysis ...................................................... 50
3.1 Estimated SAR calculation ............................................................. 51
3.2 Simultaneous Transmission analysis ............................................... 51
4. I nstruments List ................................................................................... 53
5. Measurements ..................................................................................... 54
6. SAR System Performance Verif ication .................................................... 84
7. DAE & Probe Calibration Certif icate ....................................................... 89
8. Uncertainty Budget ............................................................................ 105
9. Phantom Description .......................................................................... 106
10. System Validation from Original Equipment Supplier ........................... 107
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 4 of 129
1. General I nformation
1.1 Testing Laboratory
SGS Taiwan Ltd. Electronics & Communication Laboratory
No.134, Wu Kung Road, New Taipei I ndustrial Park, Wuku District, New Taipei City, Taiwan
Tel
Fax
I nternet
+ 886-2-2299-3279
+ 886-2-2298-0488
http:/ / www.tw.sgs.com/
1.2 Details of Applicant
Company Name
Acer I ncorporated
Company Address
8F., No.88, Sec. 1, Hsintai 5th Rd., Hsichih, New Taipei City 22181,
Taiwan (R.O.C.)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 5 of 129
1.3 Description of EUT
Equipment Under Test
Notebook
Brand Name of Host
Model No. of Host
MS2398
Model No. of Module
7265NGW
Antenna Designation
(Maximum Gain)
Mode of Operation
Duty Cycle
TX Frequency Range
(MHz)
PI FA Antenna
1. Antenna Main: 2.4GHz: 2.83dBi / 5GHz: -0.04dBi
2. Antenna Aux: 2.4GHz: 2.8dBi / 5GHz: 1.42dBi
WLAN802.11 a/ b/ g/ n(20M/ 40M)/ ac(20M/ 40M/ 80M) band
Bluetooth
WLAN802.11 a/ b/ g/ n(20M/ 40M)/
ac(20M/ 40M/ 80M)
WLAN802.11 b/ g/ n(20M)
2412
─
2462
WLAN802.11 n (40M)
2422
─
2452
WLAN802.11 a/ n(20M) 5.2G
5180
─
5240
WLAN802.11 n(40M) 5.2G
5190
─
5230
WLAN802.11 ac(80M) 5.2G
5210
─
5210
WLAN802.11 a/ n(20M) 5.3G
5260
─
5320
WLAN802.11 n(40M) 5.3G
5270
─
5310
WLAN802.11 ac(80M) 5.3G
5290
─
5290
WLAN802.11 a/ n(20M) 5.6G
5500
─
5700
WLAN802.11 ac(20M) 5.6G
5720
WLAN802.11 n(40M) 5.6G
5510
WLAN802.11 ac(40M) 5.6G
─
5670
5710
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 6 of 129
TX Frequency Range
(MHz)
Channel Number
(ARFCN)
WLAN802.11 ac(80M) 5.6G
5530
─
5690
WLAN802.11 a/ n(20M) 5.8G
5745
─
5825
WLAN802.11 n(40M) 5.8G
5755
─
5795
WLAN802.11 ac(80M) 5.8G
5775
─
5775
Bluetooth
2402
─
2480
WLAN802.11 b/ g/ n(20M)
─
11
WLAN802.11 n (40M)
─
WLAN802.11 a/ n(20M) 5.2G
36
─
48
WLAN802.11 n(40M) 5.2G
38
─
46
WLAN802.11 ac(80M) 5.2G
42
─
42
WLAN802.11 a/ n(20M) 5.3G
52
─
64
WLAN802.11 n(40M) 5.3G
54
─
62
WLAN802.11 ac(80M) 5.3G
58
─
58
WLAN802.11 a/ n(20M) 5.6G
100
─
140
WLAN802.11 ac(20M) 5.6G
144
WLAN802.11 n(40M) 5.6G
102
WLAN802.11 ac(40M) 5.6G
─
134
142
WLAN802.11 ac(80M) 5.6G
106
─
138
WLAN802.11 a/ n(20M) 5.8G
149
─
165
WLAN802.11 n(40M) 5.8G
151
─
159
WLAN802.11 ac(80M) 5.8G
155
─
155
─
78
Bluetooth
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 7 of 129
Max. SAR (1 g) (Unit: W/ Kg)
Antenna
Band
Measured
Reported
Channel
Position
WLAN802.11b
1.140
1.143
11
Lap-held
WLAN802.11 n(40M)
1.340
1.356
Lap-held*
WLAN802.11a 5.2G
1.260
1.292
40
Lap-held
WLAN802.11a(40M) 5.2G
1.200
1.387
46
Lap-held
WLAN802.11 ac(80M) 5.2G
0.561
0.578
42
Lap-held
WLAN802.11a 5.3G
1.130
1.133
52
Lap-held*
WLAN802.11a(40M) 5.3G
0.971
1.107
54
Lap-held
WLAN802.11 ac(80M) 5.3
0.581
0.618
58
Lap-held
WLAN802.11a 5.6G
1.380
1.402
136
Lap-held
WLAN802.11a(40M) 5.6G
1.480
1.494
134
Lap-held
WLAN802.11 ac(20M) 5.6G
1.410
1.453
144
Lap-held
WLAN802.11 ac(40M) 5.6G
1.260
1.298
142
Lap-held
WLAN802.11 ac(80M) 5.6G
1.480
1.528
138
Lap-held
WLAN802.11a 5.8G
1.470
1.484
157
Lap-held
WLAN802.11a(40M) 5.8G
1.250
1.282
151
Lap-held
WLAN802.11 ac(80M) 5.8G
1.460
1.539
155
Lap-held
Main
Test distance is 0mm.
* - repeated at the highest SAR measurement according to the FCC KDB 865664
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 8 of 129
Max. SAR (1 g) (Unit: W/ Kg)
Antenna
Band
Measured
Reported
Channel
Position
WLAN802.11b
0.941
0.945
11
Lap-held
WLAN802.11 n(40M)
0.909
0.947
Lap-held
WLAN802.11a 5.2G
0.565
0.600
40
Left side
WLAN802.11a(40M) 5.2G
0.634
0.647
46
Lap-held
WLAN802.11 ac(80M) 5.2G
0.332
0.334
42
Left side
WLAN802.11a 5.3G
0.756
0.795
60
Left side
WLAN802.11a(40M) 5.3G
0.649
0.675
54
Left side
WLAN802.11 ac(80M) 5.3
0.331
0.341
58
Left side
WLAN802.11a 5.6G
1.340
1.349
108
Lap-held
WLAN802.11a(40M) 5.6G
1.430
1.453
134
Lap-held
WLAN802.11 ac(20M) 5.6G
1.190
1.240
144
Lap-held
WLAN802.11 ac(40M) 5.6G
1.080
1.126
142
Lap-held
WLAN802.11 ac(80M) 5.6G
0.401
0.419
138
Top side
WLAN802.11a 5.8G
1.220
1.237
165
Lap-held
WLAN802.11a(40M) 5.8G
1.070
1.072
151
Lap-held
WLAN802.11a(80M) 5.8G
0.843
0.859
155
Lap-held
Aux
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 9 of 129
#.
WLAN802.11 a/ b/ g/ n( 20M/ 40M) / ac( 20/ 40/ 80M) conducted pow er table:
SI SO
Antenna
Band
MI MO
Chain 0
Chain 1
Chain0+ 1
WLAN802.11b
WLAN802.11g
-
-
WLAN802.11n(20M)
WLAN802.11n(40M)
WLAN802.11a
WLAN802.11n(20M) 5G
WLAN802.11n(40M) 5G
WLAN 802.11 ac(20M) 5G
WLAN 802.11 ac(40M) 5G
WLAN 802.11 ac(80M) 5G
-
Main Antenna ( CH0)
802.11 b
Average Power Output (dBm)
Max. Rated Avg.
Frequency Power + Max.
CH
Tolerance (dBm)
(MHz)
Data Rate (Mbps)
5.5
11
2412
17.5
17.47
17.42
17.38
17.33
2437
17.5
17.37
17.34
17.29
17.24
11
2462
17.5
17.49
17.45
17.41
17.38
Main Antenna ( CH0)
802.11 g
Max. Rated Avg.
Frequency Power + Max.
CH
Tolerance (dBm)
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
12
18
24
36
48
54
2412
14
13.72 13.66 13.62 13.58 13.54 13.51 13.47 13.43
2437
17.5
17.31 17.27 17.23 17.18 17.15 17.12 17.08 17.01
11
2462
12.5
12.44 12.41 12.37 12.33 12.29 12.24 12.18 12.15
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 10 of 129
Main Antenna ( CH0)
802.11 n (20M)
Max. Rated Avg.
Frequency Power + Max.
CH
Tolerance (dBm)
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
6.5
13
19.5
26
39
52
58.5
65
2412
14
13.96 13.91 13.86 13.82 13.78 13.73 13.68 13.64
2437
17.5
17.35 17.31 17.27 17.23 17.18 17.14 17.09 17.02
11
2462
12.5
12.41 12.37 12.34 12.28 12.24 12.19 12.14 12.08
Main Antenna ( CH0)
802.11 n (40M)
Max. Rated Avg.
Frequency Power + Max.
CH
Tolerance (dBm)
(MHz)
13.5
Average Power Output(dBm)
Data Rate (Mbps)
27
40.5
54
81
108
121.5
135
2422
13.5
13.44 13.42 13.36 13.28 13.22 13.18 13.15 13.07
2437
17.5
17.45
2452
12.5
12.23 12.18 12.13 12.08 12.02 11.95 11.87 11.82
17.4
17.35 17.31 17.27 17.22 17.19 17.14
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 11 of 129
Main Antenna ( CH0)
802.11 a
5.2/ 5.3/ 5.6/ 5.8G Max. Rated Avg.
Power + Max.
Frequency Tolerance (dBm)
CH
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
12
18
36
48
54
36
5180
14
13.84 13.77 13.74
40
5200
16
15.89 15.85 15.81 15.77 15.74 15.69 15.66 15.62
44
5220
16
15.94
48
5240
16
15.96 15.91 15.85 15.82 15.76 15.72 15.68 15.64
52
5260
16
15.99 15.94 15.87 15.83 15.76 15.71 15.67 15.62
56
5280
16
15.77 15.73 15.69 15.62 15.57 15.53 15.47 15.42
60
5300
16
15.83 15.78 15.74 15.71 15.67 15.62 15.57 15.52
64
5320
13.5
13.46 13.41 13.37 13.33 13.28 13.24 13.18 13.14
100
5500
13.5
13.36 13.32 13.27 13.24 13.18 13.12 13.04
104
5520
16
15.97 15.92 15.87 15.81 15.76 15.72 15.67 15.63
108
5540
16
15.95 15.91 15.85 15.82 15.77 15.74 15.71 15.67
112
5560
16
15.93 15.88 15.84
116
5580
16
15.92 15.87 15.83 15.76 15.72 15.65 15.61 15.57
132
5660
16
15.73 15.68 15.64 15.58 15.53 15.48 15.43 15.38
136
5680
16
15.93 15.88 15.84 15.78 15.72 15.67 15.62 15.58
140
5700
13
12.90 12.87 12.84
149
5745
16
15.85 15.81 15.76 15.72 15.67 15.62 15.54
15.5
153
5765
16
15.81 15.77 15.72 15.67 15.62 15.57
15.46
157
5785
16
15.96 15.84 15.72 15.65 15.61 15.57 15.52 15.48
161
5805
16
15.92 15.86 15.81 15.76 15.71 15.67 15.63 15.57
165
5825
16
15.85 15.81 15.75 15.71 15.66 15.62 15.57 15.52
15.9
13.7
24
13.66 13.62 13.57 13.52
15.85 15.82 15.76 15.73 15.69 15.62
15.8
12.8
13
15.77 15.72 15.68 15.62
12.76 12.72 12.67 12.62
15.5
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 12 of 129
Main Antenna ( CH0)
802.11 n(20M)
5.2/ 5.3/ 5.6/ 5.8G Max. Rated Avg.
Power + Max.
Frequency Tolerance (dBm)
CH
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
6.5
13
19.5
26
39
52
58.5
65
36
5180
14
13.81 13.77 13.74 13.70 13.67 13.64 13.60 13.57
40
5200
16
15.76 15.72 15.68 15.64 15.61 15.57 15.54 15.50
44
5220
16
15.82 15.79 15.76 15.73 15.69 15.65 15.61 15.57
48
5240
16
15.74 15.70 15.65 15.61 15.57 15.53 15.48 15.45
52
5260
16
15.91 15.87 15.84 15.80 15.77 15.72 15.68 15.62
56
5280
16
15.69 15.64 15.60 15.57 15.54 15.50 15.46 15.42
60
5300
16
15.87 15.84 15.81 15.76 15.72 15.69 15.64 15.60
64
5320
13.5
13.41 13.37 13.32 13.28 13.24 13.21 13.18 13.15
100
5500
13.5
13.39 13.35 13.28 13.24 13.18 13.15 13.11 13.08
104
5520
16
15.79 15.75 15.72 15.68 15.65 15.61 15.58 15.55
108
5540
16
15.82 15.77 15.74 15.68 15.65 15.61 15.58 15.54
112
5560
16
15.85 15.81 15.77 15.74 15.68 15.63 15.58 15.55
116
5580
16
15.86 15.82 15.77 15.74 15.68 15.65 15.61 15.58
132
5660
16
15.89 15.86 15.81 15.77 15.74 15.68 15.65 15.61
136
5680
16
15.84 15.81 15.76 15.72 15.68 15.64 15.61 15.57
140
5700
13
12.85 12.81 12.77 12.74 12.71 12.67 12.64 12.61
149
5745
16
15.91 15.87 15.84 15.81 15.77 15.74 15.70 15.67
153
5765
16
15.92 15.88 15.84 15.81 15.78 15.73 15.69 15.65
157
5785
16
15.89 15.85 15.81 15.77 15.74 15.71 15.66 15.61
161
5805
16
15.77 15.74 15.68 15.64 15.61 15.57 15.54 15.51
165
5825
16
15.93 15.89 15.85 15.81 15.77 15.74 15.70 15.67
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 13 of 129
Main Antenna ( CH0)
802.11 n(40M)
5.2/ 5.3/ 5.6/ 5.8G Max. Rated Avg.
Power + Max.
Frequency Tolerance (dBm)
CH
(MHz)
13.5
11.9
Average Power Output (dBm)
Data Rate (Mbps)
27
40.5
54
81
108
121.5
135
38
5190
12
11.87 11.82 11.75 11.71 11.64 11.58 11.52
46
5230
16.5
15.87 15.81 15.76 15.72 15.67 15.62 15.57 15.52
54
5270
16.5
15.93 15.87 15.82 15.78 15.72 15.67 15.63 15.58
62
5310
13.5
13.36 13.31 13.27 13.24
102
5510
13.5
13.48 13.41 13.36 13.32 13.27 13.23 13.17 13.08
110
5550
16.5
16.31 16.25 16.17 16.08 16.02 15.96 15.92 15.86
134
5670
16.5
16.46 16.38 16.33 16.27 16.22 16.15 16.11 16.07
151
5755
16.5
16.39 16.28 16.21 16.15 16.06 16.01 15.98 15.94
159
5795
16.5
16.34 16.28 16.24 16.18 16.09 16.02 15.94 15.87
13.2
13.17 13.08 13.01
Main Antenna ( CH0)
802.11 ac (20M) Max. Rated
Avg.
5.6G
Power +
Max.
Frequency
CH
Tolerance
(MHz)
(dBm)
54
5270
16.5
Average Power Output (dBm)
Data Rate (Mbps)
6.5
13
19.5
26
39
52
58.5
65
78
N/ A
16.37 16.31 16.27 16.24 16.18 16.08 16.02 15.95 15.9
Main Antenna ( CH0)
802.11 ac (40M) Max. Rated
Avg.
5.6G
Power +
Max.
Frequency
CH
Tolerance
(MHz)
13.5
(dBm)
142
5710
16.5
Average Power Output (dBm)
Data Rate (Mbps)
27
40.5
54
81
108 121.5 135
162
180
16.37 16.3 16.24 16.17 16.12 16.04 15.95 15.91 15.85 15.81
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 14 of 129
Main Antenna ( CH0)
802.11 ac (80M) Max. Rated
Average Power Output (dBm)
Avg.
5.2/ 5.3/ 5.6/ 5.8G Power +
Max.
Data Rate (Mbps)
Frequency
CH
Tolerance
(MHz)
29.3 58.5 87.8 117 175.5 234 263.3 292.5 351
(dBm)
390
42
5210
13.5
13.37 13.31 13.27 13.22 13.17 13.08 13.01 12.95 12.91 12.86
58
5290
13.5
13.23 13.18 13.08 13.01 12.95 12.91 12.86 12.81 12.75 12.72
106
5530
13.5
13.46 13.41 13.35 13.3 13.27 13.24 13.18 13.09 13.02 12.95
138
5690
16
15.86 15.82 15.76 15.71 15.67 15.62 15.57 15.51 15.46 15.41
155
5775
16
15.77 15.72 15.67 15.62 15.56 15.51 15.45 15.4 15.37 15.32
# . Per FCC KDB443999, transmission on channels which overlap the 5600-5650 MHz is
prohibited as a client.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 15 of 129
Aux Antenna ( CH1)
802.11 b
Average Power Output (dBm)
Max. Rated Avg.
Frequency Power + Max.
CH
Tolerance (dBm)
(MHz)
Data Rate (Mbps)
5.5
11
2412
17.5
17.49
17.41
17.37
17.34
2437
17.5
17.34
17.31
17.27
17.22
11
2462
17.5
17.48
17.41
17.34
17.3
Aux Antenna ( CH1)
802.11 g
Max. Rated Avg.
Frequency Power + Max.
CH
Tolerance (dBm)
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
12
18
13.7
24
36
48
54
2412
14.5
13.78 13.73
13.66 13.62 13.58 13.54 13.48
2437
17.5
17.31 17.27 17.22 17.18 17.14
11
2462
12.5
12.39 12.36 12.32 12.27 12.23 12.17 12.12 12.07
17.1
17.05 17.01
Aux Antenna ( CH1)
802.11 n (20M)
Max. Rated Avg.
Frequency Power + Max.
CH
Tolerance (dBm)
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
6.5
13
19.5
26
39
52
58.5
65
2412
14.5
14.48 14.43 14.39 14.35 14.28 14.24 14.18 14.09
2437
17.5
17.29 17.25 17.19 17.15 17.08 17.02 16.97 16.92
11
2462
12.5
12.44
12.4
12.37 12.34 12.28 12.24 12.18 12.14
Aux Antenna ( CH1)
802.11 n (40M)
Max. Rated Avg.
Frequency Power + Max.
CH
Tolerance (dBm)
(MHz)
13.5
Average Power Output(dBm)
Data Rate (Mbps)
27
40.5
54
81
108
121.5
135
2422
13.5
13.42 13.36 13.31 13.27 13.24 13.17 13.11 13.04
2437
17.5
17.32 17.25 17.19 17.14 17.07
2452
11.5
11.26 11.18 11.12 11.06 11.01 10.96 10.91 10.87
17
16.92 16.87
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 16 of 129
Aux Antenna ( CH1)
802.11 a
5.2/ 5.3/ 5.6/ 5.8G Max. Rated Avg.
Power + Max.
Frequency Tolerance (dBm)
CH
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
12
18
24
36
48
54
36
5180
14
14
13.81 13.76 13.72 13.67 13.62 13.57 13.52
40
5200
16
16
15.74 15.71 15.67 15.62 15.57 15.51 15.47
44
5220
16
16
15.86 15.81 15.75 15.71 15.64 15.60 15.54
48
5240
16
16
15.99 15.94 15.87 15.82 15.76 15.71 15.65
52
5260
16
16
15.92 15.87 15.81 15.74 15.70 15.67 15.62
56
5280
16
16
15.89 15.82 15.76 15.71 15.67 15.62 15.57
60
5300
16
16
15.78 15.74 15.68 15.62 15.58 15.54 15.51
64
5320
13.5
13.5
13.42 13.38 13.32 13.28 13.24 13.17 13.08
100
5500
13.5
13.5
13.32 13.28 13.24 13.17 13.08 13.01 12.95
104
5520
16
16
15.94 15.88 15.82 15.75 15.71 15.67 15.64
108
5540
16
16
15.97 15.94 15.88 15.84 15.81 15.75 15.71
112
5560
16
16
15.88 15.84 15.81 15.76 15.73 15.68 15.62
116
5580
16
16
15.83 15.78 15.74 15.68 15.63 15.60 15.57
132
5660
16
15.62 15.57 15.52 15.48 15.42 15.38 15.35
136
5680
16
15.63
140
5700
13
12.55 12.51 12.47 12.38 12.35 12.31 12.27 12.24
149
5745
16
15.88 15.82 15.74
153
5765
16
15.55 15.51 15.47 15.44
157
5785
16
15.66 15.55 15.52 15.47 15.42 15.37 15.32 15.27
161
5805
16
15.55 15.48 15.42 15.37 15.32 15.27 15.24 15.17
165
5825
16
15.96 15.92 15.87 15.84 15.81 15.77 15.71 15.68
15.6
15.3
15.55 15.51 15.47 15.42 15.37 15.32
15.7
15.67 15.62 15.54 15.51
15.4
15.37 15.34
15.3
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 17 of 129
Aux Antenna ( CH1)
802.11 n(20M)
5.2/ 5.3/ 5.6/ 5.8G Max. Rated Avg.
Power + Max.
Frequency Tolerance (dBm)
CH
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
6.5
13
19.5
26
39
52
58.5
65
36
5180
14
14
13.79 13.75 13.71 13.67 13.64 13.61 13.58
40
5200
16
16
15.84 15.81 15.77 15.74 15.70 15.67 15.64
44
5220
16
16
15.81 15.77 15.74 15.71 15.67 15.64 15.61
48
5240
16
16
15.93 15.88 15.84 15.81 15.78 15.72 15.68
52
5260
16
16
15.66 15.62 15.58 15.54 15.51 15.48 15.45
56
5280
16
16
15.83 15.79 15.75 15.71 15.68 15.64 15.60
60
5300
16
16
15.86 15.83 15.78 15.75 15.71 15.68 15.64
64
5320
13.5
13.5
13.38 13.35 13.31 13.27 13.24 13.21 13.17
100
5500
13.5
13.5
13.42 13.38 13.34 13.28 13.24 13.18 13.14
104
5520
16
16
15.92 15.88 15.84 15.81 15.77 15.74 15.70
108
5540
16
16
15.88 15.85 15.81 15.77 15.74 15.71 15.67
112
5560
16
16
15.81 15.77 15.74 15.70 15.67 15.64 15.61
116
5580
16
16
15.82 15.78 15.75 15.71 15.67 15.64 15.61
132
5660
16
16
15.77 15.74 15.68 15.64 15.61 15.57 15.54
136
5680
16
16
15.71 15.67 15.64 15.61 15.57 15.54 15.50
140
5700
13
13
12.89 12.85 12.81 12.77 12.74 12.71 12.67
149
5745
16
16
15.74 15.71 15.67 15.62 15.58 15.54 15.51
153
5765
16
16
15.81 15.78 15.74 15.71 15.67 15.64 15.60
157
5785
16
16
15.93 15.88 15.84 15.81 15.77 15.74 15.71
161
5805
16
16
15.92 15.88 15.85 15.82 15.78 15.75 15.71
165
5825
16
16
15.94 15.89 15.85 15.82 15.78 15.75 15.71
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 18 of 129
Aux Antenna ( CH1)
802.11 n(40M)
5.2/ 5.3/ 5.6/ 5.8G Max. Rated Avg.
Power + Max.
Frequency Tolerance (dBm)
CH
(MHz)
13.5
Average Power Output (dBm)
Data Rate (Mbps)
27
40.5
54
81
108
135
38
5190
13.5
13.31 13.27 13.24 13.17
46
5230
16.5
16.41 16.37 16.33 16.28 16.24 16.17 16.08 16.02
54
5270
16.5
16.33 16.28 16.24 16.18 16.12 16.07 16.01 15.95
62
5310
13.5
13.38 13.32 13.28 13.24 13.17 13.07 13.02 12.95
102
5510
14
13.98 13.92 13.86 13.82 13.77 13.74 13.68 13.62
110
5550
16.5
16.38 16.34
134
5670
16.5
16.43 16.35 16.31 16.26 16.21 16.15 16.09 16.02
151
5755
16.5
16.49 16.42 16.35
159
5795
16.5
16.33 16.28 16.24 16.18 16.08 16.02 15.98 15.92
16.3
13.1
121.5
13.06 13.01 12.97
16.24 16.21 16.14 16.08 16.02
16.3
16.27 16.21 16.16 16.08
Aux Antenna ( CH1)
802.11 ac
(20M)
5.6G
Max. Rated
Avg.
Power + Max.
Frequency Tolerance
CH
(dBm)
(MHz)
6.5
54
5270
16.5
Average Power Output (dBm)
Data Rate (Mbps)
13
19.5
26
39
52
58.5
65
78
N/ A
16.32 16.27 16.24 16.17 16.08 16.02 15.95 15.91 15.88
Aux Antenna ( CH1)
802.11 ac
(40M)
Max. Rated
Avg.
5.6G
Power + Max.
Frequency Tolerance
CH
(dBm)
(MHz)
13.5
142
5710
16.5
Average Power Output (dBm)
Data Rate (Mbps)
27
40.5
54
81
108 121.5 135
162
180
16.32 16.28 16.25 16.22 16.17 16.13 16.08 16.04 16.01 15.97
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 19 of 129
Aux Antenna ( CH1)
802.11 ac (80M) Max. Rated
Average Power Output (dBm)
Avg.
5.2/ 5.3/ 5.6/ 5.8G Power +
Max.
Data Rate (Mbps)
Frequency
CH
Tolerance
(MHz)
29.3 58.5 87.8 117 175.5 234 263.3 292.5 351
(dBm)
390
42
5210
13.5
13.48 13.44 13.41 13.37 13.32 13.28 13.24 13.22 13.18 13.14
58
5290
13.5
13.37 13.34 13.31 13.27 13.24 13.21 13.17 13.13 13.11 13.08
106
5530
13.5
13.46 13.41 13.38 13.35 13.31 13.28 13.25 13.22 13.2 13.17
138
5690
11.5
11.31 11.28 11.25 11.21 11.18 11.14 11.12 11.08 11.05 11.02
155
5775
14
13.92 13.88 13.85 13.83 13.81 13.77 13.75 13.72 13.68 13.66
# . Per FCC KDB443999, transmission on channels which overlap the 5600-5650 MHz is
prohibited as a client.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 20 of 129
MI MO ( CH0 + CH1)
802.11n(20M) Max. Rated Avg.
Power + Max.
Frequency
Tolerance
CH
(MHz)
(dBm)
Average Power Output(dBm)
Data Rate (Mbps)
6.5
13
19.5
26
39
52
58.5
65
2412
12
11.95 11.90 11.87 11.82 11.79 11.75 11.72 11.68
2437
13.5
13.41 13.37 13.32 13.28 13.24 13.18 13.14 13.08
11
2462
12
11.66 11.62 11.57 11.54 11.50 11.46 11.42 11.38
MI MO ( CH0 + CH1)
802.11n(40M) Max. Rated Avg.
Power + Max.
Frequency
Tolerance
CH
(MHz)
13.5
(dBm)
Average Power Output(dBm)
Data Rate (Mbps)
27
40.5
54
81
108
121.5
135
2412
11.5
11.44 11.39 11.34 11.28 11.24 11.18 11.14 11.08
2437
13.5
13.47 13.43 13.38 13.34 13.28 13.24 13.18 13.14
2462
9.5
9.32
9.28
9.24
9.18
9.14
9.11
9.07
9.04
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 21 of 129
MI MO ( CH0 + CH1)
802.11n(20M)
5.2/ 5.3/ 5.6/ 5.8G Max. Rated Avg.
Power + Max.
Frequency Tolerance (dBm)
CH
(MHz)
Average Power Output(dBm)
Data Rate (Mbps)
6.5
13
19.5
26
39
52
58.5
65
36
5180
12
11.91 11.87 11.84 11.78 11.74 11.71 11.67 11.64
40
5200
13.5
13.32 13.28 13.24 13.21 13.17 13.14 13.08 13.04
44
5220
13.5
13.31 13.28 13.24 13.18 13.14 13.08 13.04 13.00
48
5240
13.5
13.29 13.25 13.22 13.18 13.15 13.12 13.08 13.04
52
5260
13.5
13.42 13.38 13.35 13.31 13.27 13.25 13.18 13.15
56
5280
13.5
13.36 13.32 13.28 13.24 13.18 13.14 13.08 13.05
60
5300
13.5
13.35 13.31 13.28 13.22 13.15 13.07 13.02 12.94
64
5320
11.5
11.41 11.37 11.34 11.28 11.24 11.18 11.08 11.02
100
5500
10.5
10.42 10.38 10.35 10.30 10.26 10.22 10.18 10.09
104
5520
13.5
13.22 13.18 13.15 13.11 13.08 13.02 12.94 12.90
108
5540
13.5
13.31 13.28 13.24 12.18 12.15 12.11 12.07 12.04
112
5560
13.5
13.42 13.38 13.33 13.28 13.25 13.21 13.18 13.12
116
5580
13.5
13.44 13.38 13.34 13.28 13.25 13.21 13.17 13.14
132
5660
13.5
13.39 13.35 13.28 13.25 13.18 13.12 13.09 13.02
136
5680
13.5
13.21 13.18 13.12 13.08 13.04 12.99 12.94 12.90
140
5700
11
10.94 10.91 10.87 10.84 10.79 10.75 10.71 10.67
149
5745
13.5
13.19 13.15 13.11 13.08 13.04 13.00 12.95 12.92
153
5765
13.5
13.41 13.38 13.34 13.28 13.25 13.22 13.18 13.14
157
5785
13.5
13.44 13.41 13.38 13.34 13.28 13.24 13.18 13.15
161
5805
13.5
13.49 13.44 13.41 13.38 13.34 13.28 13.24 13.21
165
5825
13.5
13.39 13.36 13.32 13.28 13.24 13.18 13.15 13.12
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 22 of 129
MI MO ( CH0 + CH1)
802.11n(40M)
5.2/ 5.3/ 5.6/ 5.8G Max. Rated Avg.
Power + Max.
Frequency Tolerance (dBm)
CH
(MHz)
13.5
9.94
Average Power Output(dBm)
Data Rate (Mbps)
27
9.91
40.5
9.88
54
81
108
9.85
9.81
9.76
121.5
9.72
135
38
5190
10
9.68
46
5230
13.5
13.22 13.19 13.17 13.14 13.11 13.08 13.05 13.02
54
5270
13.5
13.42 13.39 13.37 13.34 13.32 13.29 13.26 13.24
62
5310
11.5
11.43 11.41 11.38 11.33 11.31 11.28 11.25 11.23
102
5510
11.5
11.48 11.47 11.45 11.42 11.38 11.35 11.32 11.28
110
5550
13.5
13.46 13.44 13.41 13.38 13.34 13.31 13.28 13.25
134
5670
13.5
13.42 13.38 13.35 13.33 13.30 13.28 13.25 13.22
151
5755
13.5
13.34 13.28 13.25 13.22 13.19 13.17 13.15 13.14
159
5795
13.5
13.48 13.45 13.42 13.38 13.35 13.34 13.31 13.28
MI MO ( CH0 + CH1)
802.11 ac
(20M)
5.6G
Max. Rated
Avg.
Power + Max.
Tolerance
Frequency
CH
(dBm)
(MHz)
54
5270
13.5
Average Power Output (dBm)
Data Rate (Mbps)
13
26
39
52
78
104
117
130
156
N/ A
13.29 13.27 13.25 13.22 13.19 13.15 13.11 13.08 13.04
MI MO ( CH0 + CH1)
802.11 ac
(40M)
Max. Rated
Avg.
5.6G
Power + Max.
Frequency Tolerance
CH
(dBm)
(MHz)
142
5710
13.5
Average Power Output (dBm)
Data Rate (Mbps)
27
54
81
108
162
216
243
270
324
360
13.38 13.34 13.32 13.28 13.25 13.23 13.19 13.17 13.15 13.12
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 23 of 129
MI MO ( CH0 + CH1)
802.11 ac (80M) Max. Rated
Avg.
5.2/ 5.3/ 5.6/ 5.8G Power +
Max.
Frequency
CH
Tolerance
(MHz)
58.5
(dBm)
Average Power Output (dBm)
Data Rate (Mbps)
117 175.5 234
351
468 526.5 585
702
780
42
5210
13.5
13.44 13.41 13.38 13.35 13.32 13.28 13.24 13.21 13.18 13.14
58
5290
11.5
11.43 11.41 11.39 11.37 11.35 11.32 11.28 11.25 11.21 11.18
106
5530
11.5
11.36 11.33 11.31 11.28 11.25 11.21 11.17 11.13 11.1 11.06
138
5690
11.5
11.35 11.33 11.32 11.28 11.24 11.22 11.19 11.15 11.12 11.08
155
5775
13.5
13.45 13.41 13.39 11.37 11.35 11.31 11.28 11.24 11.2 11.17
# . Per FCC KDB443999, transmission on channels which overlap the 5600-5650 MHz is
prohibited as a client.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 24 of 129
# . Bluetooth maximum conducted pow er table:
Frequency
(MHz)
2402
2441
2480
GFSK
3.95
4.39
4.47
Peak (dBm)
π4DQPSK
3.88
4.21
4.38
8DPSK
3.34
3.48
3.53
Frequency
(MHz)
Peak (dBm)
2402
2440
2480
4.58
5.10
5.58
BT4.0
1.4 Test Environment
Ambient Temperature: 22± 2° C
Tissue Simulating Liquid: 22± 2° C
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 25 of 129
1.5 Operation Description
Use chipset specif ic software to control the EUT, and makes it transmit in maximum
power. Measurements are performed respectively on the lowest, middle and highest
channels of the operating band(s). The EUT is set to maximum power level during all
tests, and at the beginning of each test the battery is fully charged.
The EUT was tested in three conf igurations:
Configuration 1: Lap-held of tablet mode w ith test distance 0mm.
Configuration 2: Top side of tablet mode w ith test distance 0mm.
Configuration 3: Left side of tablet mode w ith test distance 0mm.(left side is
not required to be tested for main antenna based on the SAR test
exclusion threshold in FCC KDB447498D01.)
Other Configurations: right and bottom sides were not required to be tested based on
the SAR test exclusion threshold in FCC KDB447498D01.
Front view of the tablet mode
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 26 of 129
Side view of the laptop mode
Note:
1. The device is a convertible laptop with its ability to transform to a tablet with the
removable keyboard section.
2. The removable keyboard section contains a wireless transmitter, and the SAR test for the
keyboard alone is not required based on the SAR test exclusion threshold in
KDB447498D01, please refer to Note10.
3. Due to the distance between WLAN antennas and the bottom of is over 20cm while it is
in laptop mode, the SAR measurement in laptop mode is not required.
4. The test configuration of this device has been confirmed to FCC by a KDB inquiry.
( tracking number 144761 )
5. SAR testing for 802.11g/ n is not required since its maximum power is less than 1/ 4 dB
higher than 802.11b.
6. SAR testing for 802.11n 5GHz is not required when its maximum power is less than 1/ 4
dB higher than 802.11a.
7. SAR testing for 802.11ac 5GHz is required for the worst position of 802.11a when the
maximum power of 802.11ac is less than 1/ 4 dB higher than 802.11a.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 27 of 129
8. Testing at higher data rates is not required since the maximum power is less than 1/ 4 dB
higher than those measured at the lowest data rate.
9. For Bluetooth operational modes the transmission is at Aux output. Bluetooth can only be
transmitted simultaneously with Main antenna according to client’s operation description.
10. According to KDB447498 D01,
(1) The SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances≤
50 mm are determined by:
When the minimum test separation distance is < 5mm, 5mm is applied to determine
SAR test exclusion.
(2) For test separation distances > 50 mm, and the frequency at 100 MHz to 1500MHz,
the SAR test exclusion threshold is determined according to the following, and as
illustrated in Appendix B of KDB447498 D01.
)](mW),
[(Threshold at 50mm in step1) + (test separation distance-50mm)x(
(3) For test separation distances > 50 mm, and the frequency at > 1500MHz to 6GHz, the
SAR test exclusion threshold is determined according to the following, and as
illustrated in Appendix B of KDB447498 D01.
[(Threshold at 50mm in step1) + (test separation distance-50mm)x10](mW),
Top side
Mode
Max. tune-up
power(dBm)
Max. tune-up
power(mW)
WLAN
2.4G_Main
17.5
WLAN
5G_Main
Left side
Right side
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
Ant. to
surface
(mm)
over
200mm
Require
SAR
testing?
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
56.234
less than
17.647
YES
222
YES
NO
66
161.77
NO
16.5
44.668
less than
21.561
YES
222
YES
NO
66
162.16
NO
Mode
Max. tune-up
power(dBm)
Max. tune-up
power(mW)
WLAN
2.4G_Main
17.5
WLAN
5G_Main
16.5
Lap- held
Bottom side
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
Ant. to
surface
(mm)
over
200mm
Require
SAR
testing?
56.234
less than
17.647
YES
200
YES
NO
44.668
less than
21.561
YES
200
YES
NO
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 28 of 129
Top side
Mode
Max. tune-up
power(dBm)
Max. tune-up
power(mW)
WLAN
2.4G_Aux
17.5
WLAN
5G_Aux
Left side
Right side
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
Ant. to
surface
(mm)
over
200mm
Require
SAR
testing?
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
56.234
less than
17.647
YES
270
YES
NO
13
8.293
YES
16.5
44.668
less than
21.561
YES
270
YES
NO
13
6.787
YES
Mode
Max. tune-up
power(dBm)
Max. tune-up
power(mW)
WLAN
2.4G_Aux
17.5
WLAN
5G_Aux
Lap- held
Bottom side
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
Ant. to
surface
(mm)
over
200mm
Require
SAR
testing?
56.234
less than
17.647
YES
200
YES
NO
16.5
44.668
less than
21.561
YES
200
YES
NO
Mode
Maximum
power(dBm)
Maximum
power(mW)
BT
5.58
3.614
Top side
Right side
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
Ant. to
surface
(mm)
over
200mm
Require
SAR
testing?
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
less than
1.138
NO
270
YES
NO
13
0.438
NO
Lap- held
Mode
Maximum
power(dBm)
Maximum
power(mW)
BT
5.58
3.614
Left side
Bottom side
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
Ant. to
surface
(mm)
over
200mm
Require
SAR
testing?
less than
1.138
NO
200
YES
NO
Lap-held
Mode
Maximum tune-up
power(dBm)
Maximum
tune-up
power(mW)
wireless
transmitter in
keyboard
Ant. to
surface
(mm)
Exclusion
threshold
(mW)
Require
SAR
testing?
less than
0.314
NO
11. MI MO SAR is not necessary since combined MI MO maximum output (maximum tune-up
power) is less than the any single chain output Main or Aux (maximum tune-up power),
and there is an antenna separation in MI MO.
12. Although the standalone SAR test of BT is not required, BT and WLAN Main may transmit
simultaneously, so the standalone SAR test of BT is measured to evaluate whether the
simultaneous transmission SAR measurement is required.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 29 of 129
13. According to KDB447498 D01, testing of other required channels is not required when
the reported 1-g SAR for the highest output channel is ≤ 0.8 W/ kg, when the
transmission band is ≤ 100 MHz.
14. According to KDB447498 D01, testing of other required channels is not required when
the reported 1-g SAR for the highest output channel is ≤ 0.6 W/ kg, when the
transmission band is between 100 MHz and 200MHz.
15. According to KDB447498 D01, testing of other required channels is not required when
the reported 1-g SAR for the highest output channel is ≤ 0.4 W/ kg, when the
transmission band is ≥ 200MHz.
16. According to KDB865664 D01, SAR measurement variability must be assessed for each
frequency band. When the original highest measured SAR is ≥ 0.8 W/ kg, repeated that
measurement once. Perform a second repeated measurement only if the ratio of largest
to smallest SAR for the original and first repeated measurements is > 1.20 or when the
original or repeated measurement is ≥ 1.45 W/ kg (~ 10% from the 1-g SAR limit)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 30 of 129
1.6 The SAR Measurement System
A block diagram of the SAR measurement System is given in Fig. a. This SAR
Measurement System uses a Computer-controlled 3-D stepper motor system (SPEAG
DASY 5 professional system). The model EX3DV4 f ield probe is used to determine the
internal electric f ields. The SAR can be obtained from the equation SAR= σ (| Ei| 2)/ ρ
where σ and ρ are the conductivity and mass density of the tissue-simulant.
The DASY 5 system for performing compliance tests consists of the following items:
 A standard high precision 6-axis robot (Staubli RX family) with controller, teach
pendant and software. An arm extension is for accommodating the data acquisition
electronics (DAE).
 A dosimetric probe, i.e., an isotropic E-field probe optimized and calibrated for usage
intissue simulating liquid. The probe is equipped with an optical surface detector
system.
 A data acquisition electronics (DAE) which performs the signal amplification, signal
multiplexing, AD-conversion, offset measurements, mechanical surface detection,
collision detection, etc. The unit is battery powered with standard or rechargeable
batteries. The signal is optically transmitted to the EOC.
Fig. a The block diagram of SAR system
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 31 of 129
 The Electro-optical converter (EOC) performs the conversion between optical and









electrical of the signals for the digital communication to the DAE and for the analog
signal from the optical surface detection. The EOC is connected to the measurement
server.
The function of the measurement server is to perform the time critical tasks such as
signal filtering, control of the robot operation and fast movement interrupts.
A probe alignment unit which improves the (absolute) accuracy of the probe
positioning.
A computer operating Windows 7.
DASY 5 software.
Remote control with teach pendant and additional circuitry for robot safety such as
warning lamps, etc.
The SAM twin phantom enabling testing left-hand and right-hand usage.
The device holder for handheld mobile phones.
Tissue simulating liquid mixed according to the given recipes.
Validation dipole kits allowing to validate the proper functioning of the system.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 32 of 129
1.7 System Components
EX3DV4 E-Field Probe
Construction
Calibration
Symmetrical design with triangular core
Built-in shielding against static charges
PEEK enclosure material (resistant to
organic solvents, e.g., DGBE)
Basic Broad Band Calibration in air
Conversion Factors (CF) for HSL
2450/ 5200/ 5300/ 5600/ 5800 MHz
Additional CF for other liquids and
frequencies upon request
Frequency
Directivity
10 MHz to > 6 GHz,
± 0.3 dB in HSL (rotation around probe axis)
± 0.5 dB in tissue material (rotation normal to probe axis)
Dynamic Range 10 µW/ g to > 100 mW/ g
Linearity: ± 0.2 dB (noise: typically < 1 µW/ g)
Dimensions
Tip diameter: 2.5 mm
Application
High precision dosimetric measurements in any exposure scenario
(e.g., very strong gradient f ields). Only probe which enables
compliance testing for frequencies up to 6 GHz with precision of
better 30% .
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 33 of 129
SAM PHANTOM V4.0C
Construction
The shell corresponds to the specif ications of the Specif ic
Anthropomorphic Mannequin (SAM) phantom def ined in I EEE
1528-200X, CENELEC 50361 and I EC 62209.
I t enables the dosimetric evaluation of left and right hand phone
usage as well as body mounted usage at the flat phantom region. A
cover prevents evaporation of the liquid. Reference markings on the
phantom allow the complete setup of all predef ined phantom
positions and measurement grids by manually teaching three points
with the robot.
Shell Thickness 2 ± 0.2 mm
Filling Volume Approx. 25 liters
Dimensions
Height: 850 mm;
Length: 1000 mm;
Width: 500 mm
DEVI CE HOLDER
Construction
The device holder (Supporter) for
Notebook is made by POM
(polyoxymethylene resin ) , which
is non-metal and non-conductive.
The height can be adjusted to fit
varies kind of notebooks.
Device Holder
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 34 of 129
1.8 SAR System Verification
The microwave circuit arrangement for system verif ication is sketched in Fig. b. The daily
system accuracy verification occurs within the flat section of the SAM phantom. A SAR
measurement was performed to see if the measured SAR was within + / - 10% from the
target SAR values. These tests were done at 2450/ 5200/ 5300/ 5600/ 5800 MHz. The tests
were conducted on the same days as the measurement of the DUT. The obtained results
from the system accuracy verification are displayed in the table 1 (SAR values are
normalized to 1W forward power delivered to the dipole). During the tests, the ambient
temperature of the laboratory was 21.7° C, the relative humidity was 62% and the liquid
depth above the ear reference points was ≥ 15 cm ± 5 mm (frequency ≤ 3 GHz) or ≥ 10
cm ± 5 mm (frequency > 3 G Hz) in all the cases. I t is seen that the system is operating
within its specification, as the results are within acceptable tolerance of the reference
values.
Fig. b The block diagram of system verif ication
A. Signal generator
B. Amplif ier
C. Power meter
D. Dual directional coupling
E. Reference dipole antenna
Photograph of the dipole Antenna
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 35 of 129
Validation
Kit
S/ N
D2450V2
922
D5GHzV2
Frequency
(MHz)
1104
Target SAR
(1g)
(mW/ g)
Measured
SAR
(1g)(mW/ g)
Deviation
(% )
Measured
Date
2450
Body
12.9
12.9
0.00%
Sep. 29, 2014
5200
Body
7.69
7.68
0.13%
Sep. 30, 2014
5300
Body
7.84
7.8
0.51%
Oct. 01, 2014
5600
Body
8.21
8.33
-1.46%
Oct. 02, 2014
5800
Body
7.73
7.77
-0.52%
Oct. 03, 2014
Table 1. Results of system validation
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 36 of 129
1.9 Tissue Simulant Fluid for the Frequency Band
The dielectric properties for this body-simulant fluid were measured by using the Agilent
Model 85070E Dielectric Probe (rates frequency band 200 MHz to 20 GHz) in conjunction
with Network Analyzer (30 KHz-6000 MHz).
All dielectric parameters of tissue simulates were measured within 24 hours of SAR
measurements. The depth of the tissue simulant in the flat section of the phantom was ≥
15 cm ± 5 mm (Frequency ≤3G) or ≥ 10 cm ± 5 mm (Frequency > 3G) during all tests.
(Fig. 2)
Tissue
Type
Measured
Frequency
(MHz)
Body
2402
2412
2422
2437
2440
2441
2450
2452
2462
2480
5190
5200
5210
5230
5240
5260
5270
5290
5300
5310
Target
Dielectric
Constant,
εr
52.764
52.751
52.737
52.717
52.713
52.712
52.700
52.697
52.685
52.662
49.028
49.014
49.001
48.974
48.960
48.933
48.919
48.892
48.879
48.865
Target
Conductivity,
σ (S/ m)
1.904
1.914
1.923
1.938
1.940
1.941
1.950
1.953
1.967
1.993
5.288
5.299
5.311
5.334
5.346
5.369
5.381
5.504
5.416
5.428
Measured
Dielectric
Constant,
εr
54.510
54.505
54.451
54.429
54.419
54.409
54.392
54.371
54.350
54.214
48.643
48.622
48.305
48.565
48.543
48.496
48.460
48.406
48.387
48.366
Measured
Conductivity, % dev εr
σ (S/ m)
1.940
1.947
1.964
1.979
1.983
1.988
1.992
1.996
2.005
2.024
5.286
5.299
5.308
5.352
5.386
5.422
5.437
5.471
5.489
5.509
-3.31%
- 3.33%
-3.25%
-3.25%
-3.24%
-3.22%
-3.21%
-3.18%
-3.16%
-2.95%
0.79%
0.80%
1.42%
0.84%
0.85%
0.89%
0.94%
0.99%
1.01%
1.02%
% dev σ
-1.89%
-1.72%
-2.13%
-2.14%
-2.22%
-2.42%
-2.15%
-2.20%
-1.93%
-1.56%
0.04%
0.00%
0.06%
-0.34%
-0.75%
-0.99%
-1.04%
0.60%
-1.35%
-1.49%
Measurement
Date
Sep. 29,2014
Sep. 30,2014
Oct. 01,2014
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 37 of 129
Tissue
Type
Measured
Frequency
(MHz)
Body
5510
5520
5530
5540
5550
5560
5600
5660
5670
5680
5690
5700
5710
5720
5745
5755
5775
5785
5795
5800
5805
5825
Target
Dielectric
Constant,
εr
48.594
48.580
48.566
48.553
48.607
48.526
48.471
48.390
48.376
48.363
48.349
48.336
48.322
48.309
48.275
48.261
48.234
48.220
48.207
48.200
48.193
48.166
Target
Conductivity,
σ (S/ m)
5.661
5.673
5.685
5.696
5.650
5.720
5.766
5.837
5.848
5.860
5.872
5.883
5.895
5.907
5.936
5.947
5.971
5.982
5.994
6.000
6.006
6.029
Measured
Dielectric
Constant,
εr
47.719
47.683
47.668
47.654
47.613
47.572
47.406
47.233
47.183
47.133
47.166
47.199
47.113
47.027
46.927
46.906
46.882
46.870
46.857
46.850
46.822
46.718
Measured
Conductivity, % dev εr
σ (S/ m)
5.790
5.802
5.814
5.825
5.835
5.845
5.898
5.994
6.004
6.013
6.036
6.059
6.064
6.070
6.104
6.116
6.140
6.154
6.169
6.177
6.181
6.205
1.80%
1.85%
1.85%
1.85%
2.04%
1.97%
2.20%
2.39%
2.47%
2.54%
2.45%
2.35%
2.50%
2.65%
2.79%
2.81%
2.80%
2.80%
2.80%
2.80%
2.84%
3.01%
% dev σ
Measurement
Date
-2.28%
-2.27%
-2.27%
-2.26%
- 3.27%
-2.19%
-2.29%
-2.69%
-2.67%
-2.61%
-2.79%
-2.99%
-2.87%
-2.76%
-2.83%
-2.84%
-2.83%
-2.88%
-2.92%
-2.95%
-2.91%
-2.92%
Oct. 02,2014
Oct. 03,2014
Table 2. Dielectric Parameters of Tissue Simulant Fluid
The composition of the tissue simulating liquid:
Frequency
(MHz)
2450M
I ngredient
Mode
Body
DGMBE
Water
301.7ml 698.3ml
Salt
─
Preventol
D-7
─
Total
Cellulose
Sugar
amount
─
─
1.0L(Kg)
Simulating Liquids for 5 GHz, Manufactured by SPEAG:
I ngredients
Water
Esters, Emulsifiers, I nhibitors
(% by weight)
60-80
20-40
Sodium and Salt
0-1.5
Table 3. Recipes for Tissue Simulating Liquid
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 38 of 129
1.10 Evaluation Procedures
The entire evaluation of the spatial peak values is performed within the Post-processing
engine (SEMCAD). The system always gives the maximum values for the 1 g and 10 g
cubes. The algorithm to f ind the cube with highest averaged SAR is divided into the
following stages:
1. The extraction of the measured data (grid and values) from the Zoom Scan.
2. The calculation of the SAR value at every measurement point based on all stored data
(A/ D values and measurement parameters)
3. The generation of a high-resolution mesh within the measured volume
4. The interpolation of all measured values from the measurement grid to the
high-resolution grid
5. The extrapolation of the entire 3-D f ield distribution to the phantom surface over the
distance from sensor to surface
6. The calculation of the averaged SAR within masses of 1g and 10g.
The probe is calibrated at the center of the dipole sensors that is located 1 to 2.7mm
away from the probe tip. During measurements, the probe stops shortly above the
phantom surface, depending on the probe and the surface detecting system. Both
distances are included as parameters in the probe conf iguration f ile. The software
always knows exactly how far away the measured point is from the surface. As the probe
cannot directly measure at the surface, the values between the deepest measured point
and the surface must be extrapolated. The angle between the probe axis and the surface
normal line is less than 30 degree.
I n the Area Scan, the gradient of the interpolation function is evaluated to f ind all the
extreme of the SAR distribution. The uncertainty on the locations of the extreme is less
than 1/ 20 of the grid size. Only local maximum within –2 dB of the global maximum are
searched and passed for the Cube Scan measurement. I n the Cube Scan, the
interpolation function is used to extrapolate the Peak SAR from the lowest measurement
points to the inner phantom surface (the extrapolation distance). The uncertainty
increases with the extrapolation distance. To keep the uncertainty within 1% for the 1 g
and 10 g cubes, the extrapolation distance should not be larger than 5mm.
The maximum search is automatically performed after each area scan measurement. I t
is based on splines in two or three dimensions. The procedure can f ind the maximum for
most SAR distributions even with relatively large grid spacing. After the area scanning
measurement, the probe is automatically moved to a position at the interpolated
maximum. The following scan can directly use this position for reference, e.g., for a f iner
resolution grid or the cube evaluations. The 1g and 10g peak evaluations are only
available for the predef ined cube 7x7x7 scans. The routines are verif ied and optimized
for the grid dimensions used in these cube measurements.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 39 of 129
The measured volume of 30x30x30mm contains about 30g of tissue.
The f irst procedure is an extrapolation (incl. Boundary correction) to get the points
between the lowest measured plane and the surface. The next step uses 3D
interpolation to get all points within the measured volume. I n the last step, a 1g cube is
placed numerically into the volume and its averaged SAR is calculated. This cube is the
moved around until the highest averaged SAR is found. I f the highest SAR is found at the
edge of the measured volume, the system will issue a warning: higher SAR values might
be found outside of the measured volume. I n that case the cube measurement can be
repeated, using the new interpolated maximum as the center.
1.11 Probe Calibration Procedures
For the calibration of E-f ield probes in lossy liquids, an electric f ield with an accurately
known f ield strength must be produced within the measured liquid. For standardization
purposes it would be desirable if all measurements which are necessary to assess the
correct f ield strength would be traceable to standardized measurement procedures. I n the
following two different calibration techniques are summarized:
1.11.1 Transfer Calibration w ith Temperature Probes
I n lossy liquids the specif ic absorption rate (SAR) is related both to the electric f ield
(  ) and the temperature gradient ( T /  t ) in the liquid.
SAR 



c
T
t
whereby σ is the conductivity, ρ the density and c the heat capacity of the liquid.
Hence, the electric f ield in lossy liquid can be measured indirectly by measuring the
temperature gradient in the liquid. Non-disturbing temperature probes (optical probes or
thermistor probes with resistive lines) with high spatial resolution (< 1-2 mm) and fast
reaction time (< 1 s) are available and can be easily calibrated with high precision [ 1] . The
setup and the exciting source have no influence on the calibration; only the relative
positioning uncertainties of the standard temperature probe and the E-f ield probe to be
calibrated must be considered. However, several problems limit the available accuracy of
probe calibrations with temperature probes:
 The temperature gradient is not directly measurable but must be evaluated from
temperature measurements at different time steps. Special precaution is necessary
to avoid measurement errors caused by temperature gradients due to energy
equalizing effects or convection currents in the liquid. Such effects cannot be
completely avoided, as the measured field itself destroys the thermal equilibrium in
the liquid. With a careful setup these errors can be kept small.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 40 of 129
 The measured volume around the temperature probe is not well defined. I t is difficult
to calculate the energy transfer from a surrounding gradient temperature field into
the probe. These effects must be considered, since temperature probes are
calibrated in liquid with homogeneous temperatures. There is no traceable standard
for temperature rise measurements.
 The calibration depends on the assessment of the specific density, the heat capacity
and the conductivity of the medium. While the specific density and heat capacity can
be measured accurately with standardized procedures (~ 2% for c; much better for
ρ) , there is no standard for the measurement of the conductivity. Depending on the
method and liquid, the error can well exceed ± 5% .
 Temperature rise measurements are not very sensitive and therefore are often
performed at a higher power level than the E-field measurements. The nonlinearities
in the system (e.g., power measurements, different components, etc.) must be
considered.
Considering these problems, the possible accuracy of the calibration of E-f ield probes
with temperature gradient measurements in a carefully designed setup is about ± 10% (RSS)
[ 2] . Recently, a setup which is a combination of the waveguide techniques and the thermal
measurements was presented in [ 3] . The estimated uncertainty of the setup is ± 5% (RSS)
when the same liquid is used for the calibration and for actual measurements and ± 7-9%
(RSS) when not, which is in good agreement with the estimates given in [ 2] .
1.11.2 Calibration w ith Analytical Fields
I n this method a technical setup is used in which the f ield can be calculated analytically from
measurements of other physical magnitudes (e.g., input power). This corresponds to the
standard f ield method for probe calibration in air; however, there is no standard def ined for
f ields in lossy liquids.
When using calculated f ields in lossy liquids for probe calibration, several points must be
considered in the assessment of the uncertainty:
 The setup must enable accurate determination of the incident power.
 The accuracy of the calculated field strength will depend on the assessment of the
dielectric parameters of the liquid.
 Due to the small wavelength in liquids with high permittivity, even small setups
might be above the resonant cutoff frequencies. The field distribution in the setup
must be carefully checked for conformity with the theoretical field distribution.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 41 of 129
References
[ 1] N. Kuster, Q. Balzano, and J.C. Lin, Eds., Mobile Communications Safety , Chapman & Hall,
London, 1997.
[ 2] K. Meier, M. Burkhardt, T. Schmid, and N. Kuster, \ Broadband calibration of E-f ield probes
in lossy media", I EEE Transactions on Microwave Theory and Techniques, vol. 44, no. 10,
pp. 1954{ 1962, Oct. 1996.
[ 3] K. Jokela, P. Hyysalo, and L. Puranen, \ Calibration of specif ic absorption rate (SAR)
probes in waveguide at 900 MHz", I EEE Transactions on I nstrumentation and
Measurements, vol. 47, no. 2, pp. 432{ 438, Apr. 1998.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 42 of 129
1.12 Test Standards and Limits
According to FCC 47CFR §2.1093(d) The limits to be used for evaluation are based
generally on criteria published by the American National Standards I nstitute (ANSI ) for
localized specific absorption rate (‘‘SAR’’) in Section 4.2 of ‘‘I EEE Standard for Safety
Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3
kHz to 300 GHz,’’ ANSI / I EEE C95.1–1992, Copyright 1992 by the I nstitute of Electrical
and Electronics Engineers, I nc., New York, New York 10017. These criteria for SAR
evaluation are similar to those recommended by the National Council on Radiation
Protection and Measurements (NCRP) in ‘‘Biological Effects and Exposure Criteria for
Radio frequency Electromagnetic Fields,’’ NCRP Report No. 86, Section 17.4.5. Copyright
NCRP, 1986, Bethesda, Maryland 20814. SAR is a measure of the rate of energy
absorption due to exposure to an RF transmitting source. SAR values have been related
to threshold levels for potential biological hazards. The criteria to be used are specified in
paragraphs (d)(1) and (d)(2) of this section and shall apply for portable devices
transmitting in the frequency range from 100 kHz to 6 GHz. Portable devices that
transmit at frequencies above 6 GHz are to be evaluated in terms of the MPE limits
specified in § 1.1310 of this chapter. Measurements and calculations to demonstrate
compliance with MPE field strength or power density limits for devices operating above 6
GHz should be made at a minimum distance of 5 cm from the radiating source.
(1) Limits for Occupational/ Controlled exposure: 0.4 W/ kg as averaged over the
whole-body and spatial peak SAR not exceeding 8 W/ kg as averaged over any 1
gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are
the hands, wrists, feet and ankles where the spatial peak SAR shall not exceed 20
W/ kg, as averaged over an 10 grams of tissue (defined as a tissue volume in the
shape of a cube).
(2) Occupational/ Controlled limits apply when persons are exposed as a consequence
of their employment provided these persons are fully aware of and exercise control
over their exposure. Awareness of exposure can be accomplished by use of warning
labels or by specific training or education through appropriate means, such as an
RF safety program in a work environment.
(3) Limits for General Population/ Uncontrolled exposure: 0.08 W/ kg as averaged over
the whole-body and spatial peak SAR not exceeding 1.6 W/ kg as averaged over any
1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are
the hands, wrists, feet and ankles where the spatial peak SAR shall not exceed 4
W/ kg, as averaged over any 10 grams of tissue (defined as a tissue volume in the
shape of a cube). General Population/ Uncontrolled limits apply when the general
public may be exposed, or when persons that are exposed as a consequence of
their employment may not be fully aware of the potential for exposure or do not
exercise control over their exposure. Warning labels placed on consumer devices
such as cellular telephones will not be sufficient reason to allow these devices to be
evaluated subject to limits for occupational/ controlled exposure in paragraph (d)(1)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 43 of 129
of this section. (Table 4.)
Human Exposure
Spatial Peak SAR
(Brain)
Spatial Average SAR
(Whole Body)
Spatial Peak SAR
(Hands/ Feet/ Ankle/ Wrist)
Uncontrolled Environment
General Population
Controlled Environment
Occupational
1.60 m W/ g
8.00 m W/ g
0.08 m W/ g
0.40 m W/ g
4.00 m W/ g
20.00 m W/ g
Table 4. RF exposure limits
Notes:
1. Uncontrolled environments are defined as locations where there is potential exposure of individuals who
have no knowledge or control of their potential exposure.
2. Controlled environments are defined as locations where there is potential exposure of individuals who
have knowledge of their potential exposure and can exercise control over their exposure.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 44 of 129
2. Summary of Results
Band
WLAN802.11 b
WLAN802.11 a
5.2G
WLAN802.11 n
(40M) 5.2G
WLAN802.11 ac
(80M) 5.2G
WLAN802.11 a
5.3G
WLAN802.11 n
(40M) 5.3G
WLAN802.11 ac
(80M) 5.3
Position
Antenna
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Averaged SAR over 1g
(W/ kg)
Measured
Reported
Plot
page
Lap-held
Main
2412
17.50
17.47
0.69%
1.040
1.047
Lap-held
Main
2437
17.50
17.37
3.04%
1.030
1.061
Lap-held
Main
11
2462
17.50
17.49
0.23%
1.140
1.143
54
Lap-held*
Main
11
2462
17.50
17.49
0.23%
1.090
1.093
Top side
Main
11
2462
17.50
17.49
0.23%
0.487
0.488
Lap-held
Main
40
5200
16.00
15.89
2.57%
1.260
1.292
Lap-held
Main
48
5240
16.00
15.96
0.93%
1.030
1.040
Lap-held*
Main
48
5240
16.00
15.89
2.57%
1.200
1.231
Top side
Main
48
5240
16.00
15.96
0.93%
0.656
0.662
Lap-held
Main
38
5190
12.00
11.90
2.33%
0.476
0.487
Lap-held
Main
46
5230
16.50
15.87
15.61%
1.200
1.387
55
Top side
Main
38
5190
12.00
11.90
2.33%
0.248
0.254
Top side
Main
46
5230
16.50
15.87
15.61%
0.750
0.867
Lap-held
Main
42
5210
13.50
13.37
3.04%
0.561
0.578
56
Lap-held
Main
52
5260
16.00
15.99
0.23%
1.070
1.072
Lap-held
Main
60
5300
16.00
15.83
3.99%
0.975
1.014
Lap-held*
Main
52
5260
16.00
15.99
0.23%
1.130
1.133
57
Top side
Main
52
5260
16.00
15.99
0.23%
0.666
0.668
Lap-held
Main
54
5270
16.50
15.93
14.02%
0.971
1.107
58
Lap-held
Main
62
5310
13.50
13.36
3.28%
0.590
0.609
Top side
Main
54
5270
16.50
15.93
14.02%
0.667
0.761
Lap-held
Main
58
5290
13.50
13.23
6.41%
0.581
0.618
59
Test distance is 0mm.
* - repeated at the highest SAR measurement according to the FCC KDB 865664
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 45 of 129
Band
WLAN802.11 a
5.6G
WLAN802.11 a
(40M) 5.6G
WLAN802.11 ac
(20M) 5.6G
WLAN802.11 ac
(40M) 5.6G
WLAN802.11 ac
(80M) 5.6G
Position
Antenna
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Averaged SAR over 1g
(W/ kg)
Measured
Reported
Plot
page
Lap-held
Main
104
5520
16.00
15.97
0.69%
1.090
1.098
Lap-held
Main
112
5560
16.00
15.93
1.62%
1.340
1.362
Lap-held
Main
136
5680
16.00
15.93
1.62%
1.380
1.402
60
Top side
Main
104
5520
16.00
15.97
0.69%
0.884
0.890
Top side
Main
112
5560
16.00
15.93
1.62%
0.851
0.865
Top side
Main
136
5680
16.00
15.93
1.62%
0.936
0.951
Lap-held
Main
102
5510
13.50
13.48
0.46%
0.558
0.561
Lap-held
Main
110
5550
16.50
16.31
4.47%
0.971
1.014
Lap-held
Main
134
5670
16.50
16.46
0.93%
1.480
1.494
61
Top side
Main
102
5510
13.50
13.48
0.46%
0.412
0.414
Top side
Main
110
5550
16.50
16.31
4.47%
0.870
0.909
Top side
Main
134
5670
16.50
16.46
0.93%
1.120
1.130
Lap-held
Main
144
5720
16.50
16.37
3.04%
1.410
1.453
62
Top side
Main
144
5720
16.50
16.37
3.04%
1.010
1.041
Lap-held
Main
142
5710
16.50
16.37
3.04%
1.260
1.298
63
Top side
Main
142
5710
16.50
16.37
3.04%
0.986
1.016
Lap-held
Main
106
5530
13.50
13.46
0.93%
0.691
0.697
Lap-held
Main
138
5690
16.00
15.86
3.28%
1.480
1.528
64
Top side*
Main
138
5690
16.00
15.86
3.28%
1.350
1.394
Test distance is 0mm.
* - repeated at the highest SAR measurement according to the FCC KDB 865664
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 46 of 129
Band
WLAN802.11 a
5.8G
WLAN802.11 n
(40M) 5.8G
WLAN802.11 ac
(80M) 5.8G
Position
Antenna
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Averaged SAR over 1g
(W/ kg)
Measured
Reported
Plot
page
Lap-held
Main
149
5745
16.00
15.85
3.51%
1.280
1.325
Lap-held
Main
157
5785
16.00
15.96
0.93%
1.470
1.484
65
Lap-held
Main
161
5805
16.00
15.92
1.86%
1.450
1.477
Lap-held*
Main
157
5785
16.00
15.96
0.93%
1.360
1.373
Top side
Main
149
5745
16.00
15.85
3.51%
0.890
0.921
Top side
Main
157
5785
16.00
15.96
0.93%
0.929
0.938
Top side
Main
161
5805
16.00
15.92
1.86%
0.823
0.838
Lap-held
Main
151
5755
16.50
16.39
2.57%
1.250
1.282
66
Lap-held
Main
159
5795
16.50
16.34
3.75%
1.220
1.266
Top side
Main
151
5755
16.50
16.39
2.57%
1.010
1.036
Top side
Main
159
5795
16.50
16.34
3.75%
1.030
1.069
Lap-held
Main
155
5775
16.00
15.77
5.44%
1.460
1.539
67
Test distance is 0mm.
* - repeated at the highest SAR measurement according to the FCC KDB 865664
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 47 of 129
Band
WLAN802.11 b
WLAN802.11 a
5.2G
WLAN802.11 n
(40M) 5.2G
WLAN802.11 n
(80M) 5.2G
WLAN802.11 a
5.3G
WLAN802.11 n
(40M) 5.3G
WLAN802.11 n
(80M) 5.3G
Position
Antenna
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Averaged SAR over 1g
(W/ kg)
Measured
Reported
Plot
page
Lap-held
Aux
2412
17.50
17.49
0.23%
0.803
0.805
Lap-held
Aux
2437
17.50
17.34
3.75%
0.580
0.602
Lap-held
Aux
11
2462
17.50
17.48
0.46%
0.941
0.945
68
Top side
Aux
2412
17.50
17.49
0.23%
0.311
0.312
Left side
Aux
2412
17.50
17.49
0.23%
0.356
0.357
Lap-held
Aux
48
5240
16.00
15.99
0.23%
0.377
0.378
Top side
Aux
48
5240
16.00
15.99
0.23%
0.498
0.499
Left side
Aux
48
5240
16.00
15.99
0.23%
0.520
0.521
69
Lap-held
Aux
46
5230
16.50
16.41
2.09%
0.634
0.647
70
Top side
Aux
46
5230
16.50
16.41
2.09%
0.485
0.495
Left side
Aux
46
5230
16.50
16.41
2.09%
0.629
0.642
Left side
Aux
42
5210
13.50
13.48
0.46%
0.332
0.334
71
Lap-held
Aux
52
5260
16.00
15.92
1.86%
0.385
0.392
Top side
Aux
52
5260
16.00
15.92
1.86%
0.325
0.331
Left side
Aux
52
5260
16.00
15.92
1.86%
0.484
0.493
72
Lap-held
Aux
54
5270
16.50
16.33
3.99%
0.479
0.498
Lap-held
Aux
54
5270
16.50
16.33
3.99%
0.450
0.468
Left side
Aux
54
5270
16.50
16.33
3.99%
0.649
0.675
73
Left side
Aux
58
5290
13.50
13.37
3.04%
0.331
0.341
74
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 48 of 129
Band
WLAN802.11 a
5.6G
WLAN802.11 a
(40M) 5.6G
WLAN802.11 ac
(20M) 5.6G
WLAN802.11 ac
(40M) 5.6G
WLAN802.11 ac
(80M) 5.6G
Position
Antenna
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Averaged SAR over 1g
(W/ kg)
Measured
Reported
Plot
page
Lap-held
Aux
108
5520
16.00
15.97
0.69%
1.340
1.349
75
Lap-held
Aux
132
5660
16.00
15.94
1.39%
1.100
1.115
Lap-held
Aux
140
5700
13.00
12.86
3.28%
0.724
0.748
Top side
Aux
108
5520
16.00
15.97
0.69%
0.549
0.553
Top side
Aux
132
5660
16.00
15.94
1.39%
0.567
0.575
Top side
Aux
140
5700
13.00
12.86
3.28%
0.247
0.255
Left side
Aux
108
5540
16.00
15.97
0.69%
0.850
0.856
Left side
Aux
132
5660
16.00
15.94
1.39%
0.556
0.564
Left side
Aux
140
5680
13.00
12.86
3.28%
0.230
0.238
Lap-held
Aux
102
5510
14.00
13.98
0.46%
0.992
0.997
Lap-held
Aux
110
5550
16.50
16.38
2.80%
1.310
1.347
Lap-held
Aux
134
5670
16.50
16.43
1.62%
1.430
1.453
76
Top side
Aux
102
5510
14.00
13.98
0.46%
0.440
0.442
Top side
Aux
110
5550
16.50
16.38
2.80%
0.527
0.542
Top side
Aux
134
5670
16.50
16.43
1.62%
0.651
0.662
Left side
Aux
102
5510
14.00
13.98
0.46%
0.591
0.594
Left side
Aux
110
5550
16.50
16.38
2.80%
0.706
0.726
Left side
Aux
134
5670
16.50
16.43
1.62%
0.617
0.627
Lap-held
Aux
144
5720
16.50
16.32
4.23%
1.190
1.240
77
Top side
Aux
144
5720
16.50
16.32
4.23%
0.632
0.659
Left side
Aux
144
5720
16.50
16.32
4.23%
0.494
0.515
Lap-held
Aux
142
5710
16.50
16.32
4.23%
1.080
1.126
78
Top side
Aux
142
5710
16.50
16.32
4.23%
0.625
0.651
Left side
Aux
142
5710
16.50
16.32
4.23%
0.490
0.511
Top side
Aux
138
5690
11.50
11.31
4.47%
0.401
0.419
79
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 49 of 129
Band
WLAN802.11 a
5.8G
WLAN802.11 n
(40M) 5.8G
WLAN802.11 ac
(80M) 5.8G
Band
BT4.0
Position
Antenna
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Averaged SAR over 1g
(W/ kg)
Measured
Reported
Plot
page
Lap-held
Aux
149
5745
16.00
15.98
0.46%
1.080
1.085
Lap-held
Aux
157
5785
16.00
15.96
0.93%
1.160
1.171
Lap-held
Aux
165
5825
16.00
15.94
1.39%
1.220
1.237
80
Top side
Aux
149
5745
16.00
15.98
0.46%
0.541
0.543
Left side
Aux
149
5745
16.00
15.98
0.46%
0.442
0.444
Lap-held
Aux
151
5755
16.50
16.49
0.23%
1.070
1.072
81
Lap-held
Aux
159
5795
16.50
16.33
3.99%
0.939
0.976
Top side
Aux
151
5755
16.50
16.49
0.23%
0.678
0.680
Left side
Aux
151
5755
16.50
16.49
0.23%
0.529
0.530
Lap-held
Aux
155
5775
14.00
13.92
1.86%
0.843
0.859
82
Position
Antenna
Freq.
(MHz)
Measured
Peak. Power
(dBm)
Averaged SAR over 1g
(W/ kg)
Plot
page
Measured
Lap-held
Aux
2480
5.58
0.022
83
Top side
Aux
2480
5.58
0.012
Left side
Aux
2480
5.58
0.007
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 50 of 129
3. Simultaneous Transmission Analysis
Simultaneous Transmission Scenarios:
Simultaneous Transmit Configurations
Body
WLAN Main + BT
Yes
Note:
1. WLAN Main and BT antennas may transmit simultaneously.
2. Bluetooth and WLAN Aux share the same antenna path and cannot transmit
simultaneously.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 51 of 129
3.1 Estimated SAR calculation
According to KDB447498 D01v05 – When standalone SAR test exclusion applies to an
antenna that transmits simultaneously with other antennas, the standalone SAR must be
estimated according to following to determine simultaneous transmission SAR test
exclusion:
I f the minimum test separation distance is < 5mm, a distance of 5mm is used for
estimated SAR calculation. When the test separation distance is > 50mm, the 0.4W/ kg is
used for SAR-1g.
Mode / Band
WLAN Main 2.4G
WLAN Main 5G
frequency Max. tune-up
(GHz)
power(dBm)
2.462
5.825
17.5
16.5
Test
position
test separation
distance(mm)
Estimated
SAR(W/kg)
Left side
Left side
66
66
0.4
0.4
3.2 Simultaneous Transmission analysis
Per KDB447498D01, when the sum of SAR is larger than the limit, SAR test exclusion is
determined by the SAR sum to peak location separation ratio(SPLSR).
The simultaneous transmitting antennas in each operating mode and exposure condition
combination must be considered one pair at a time to determine the SAR to peak location
separation ratio to qualify for test exclusion.
The ratio is determined by ( SAR1 + SAR2) ^ 1.5/ Ri, rounded to two decimal digits, and
must be ≤ 0.04 for all antenna pairs in the conf iguration to qualify for 1-g SAR test
exclusion.
SAR1 and SAR2 are the highest reported or estimated SAR for each antenna in the pair, and
Ri is the separation distance between the peak SAR locations for the antenna pair in mm.
When standalone test exclusion applies, SAR is estimated; the peak location is assumed to
be at the feed-point or geometric center of the antenna.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 52 of 129
WLAN Main 2.4GHz + BT
No.
Conditions
Main 2.4G
BT
Exposure
Condition
Body
Position
Distance
(mm)
Max.
Main 2.4G
Max.
BT
SAR
Summation
SPLSR
Analysis
Lap-held
1.143
0.022
1.165
ΣSAR< 1.6,
Not required
Top side
0.488
0.012
0.5
ΣSAR< 1.6,
Not required
Left side
0.4
0.007
0.407
ΣSAR< 1.6,
Not required
Position
Distance
(mm)
Max.
Main 5G
Max.
BT
SAR
Summation
SPLSR
Analysis
Lap-held
1.539
0.022
1.561
ΣSAR< 1.6,
Not required
Top side
1.13
0.012
1.142
ΣSAR< 1.6,
Not required
Left side
0.4
0.007
0.407
ΣSAR< 1.6,
Not required
WLAN Main 5GHz + BT
No.
Conditions
Main 5G
BT
Exposure
Condition
Body
Note:
1. Since the SAR summation is less than the limit, the SAR test of simultaneous transmission
is not required.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 53 of 129
4. I nstruments List
Manufacturer
Device
Type
Serial number
Date of last Date of next
calibration calibration
Schmid &
Partner
Engineering AG
Dosimetric E-Field
Probe
EX3DV4
3770
Apr.24,2014 Apr.23,2015
Schmid &
Partner
Engineering AG
System Validation
Dipole
D2450V2
922
Nov.05,2013 Nov.04,2014
D5GHzV2
1104
Apr.16,2014 Apr.15,2015
Data acquisition
Electronics
DAE4
856
Aug.27,2014 Aug.26,2015
Software
DASY 52
V52.8.8
N/ A
Calibration Calibration
not required not required
Phantom
SAM
N/ A
Calibration Calibration
not required not required
Network Analyzer
E5071C
MY46107530 Feb.14,2014 Feb.13,2015
85070E
MY44300677
Schmid &
Partner
Engineering AG
Schmid &
Partner
Engineering AG
Schmid &
Partner
Engineering AG
Agilent
Agilent
Agilent
Dielectric
Probe Kit
Dual-directional
coupler
Calibration Calibration
not required not required
772D
MY46151242 Jul.14,2014 Jul.13,2015
Agilent
RF Signal Generator
N5181A
MY50144143 Dec.24,2013 Dec.23,2016
Agilent
Power Meter
E4417A
MY51410006 Oct.25,2013 Oct.24,2015
Agilent
Power Sensor
E9301H
MY51470001 Dec.16,2013 Dec.15,2014
TECPEL
Digital thermometer DTM-303A
TP130077
Mar.17,2014 Mar.16,2015
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 54 of 129
5. Measurements
Date: 2014/ 9/ 29
WLAN 802.11b_Body_Lap-held_CH 11_Main
Communication System: WLAN802.11 b & g & n(20M)(40M); Frequency: 2462 MHz
Medium parameters used: f = 2462 MHz; σ = 2.005 S/ m; εr = 54.35; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(7.15, 7.15, 7.15); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 91x151x1) : I nterpolated grid: dx= 12 mm,
dy= 12 mm
Maximum value of SAR (interpolated) = 2.28 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x7) / Cube 0: Measurement grid:
dx= 5mm, dy= 5mm, dz= 5mm
Reference Value = 1.992 V/ m; Power Drift = 0.17 dB
Peak SAR (extrapolated) = 2.98 W/ kg
SAR( 1 g) = 1.14 W/ kg; SAR( 10 g) = 0.518 W/ kg
Maximum value of SAR (measured) = 1.89 W/ kg
0 dB = 1.89 W/ kg = 2.77 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 55 of 129
Date: 2014/ 9/ 30
WLAN802.11n( 40M) 5.2G_Body_Lap-held_CH 46_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5230 MHz
Medium parameters used: f = 5230 MHz; σ = 5.352 S/ m; εr = 48.565; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.56, 4.56, 4.56); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.61 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.312 V/ m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 5.12 W/ kg
SAR( 1 g) = 1.2 W/ kg; SAR( 10 g) = 0.364 W/ kg
Maximum value of SAR (measured) = 2.44 W/ kg
0 dB = 2.61 W/ kg = 4.16 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 56 of 129
Date: 2014/ 9/ 30
WLAN802.11ac( 80M) 5.2G_Body_Lap-held_CH 42_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5210 MHz
Medium parameters used: f = 5210 MHz; σ = 5.308 S/ m; εr = 48.605; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.56, 4.56, 4.56); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 1.26 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.592 V/ m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 2.40 W/ kg
SAR( 1 g) = 0.561 W/ kg; SAR( 10 g) = 0.164 W/ kg
Maximum value of SAR (measured) = 1.18 W/ kg
0 dB = 1.26 W/ kg = 1.02 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 57 of 129
Date: 2014/ 10/ 1
WLAN802.11a5.3G_Body_Lap-held_CH 52_Main_repeat sar test at the
highest sar measurement
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5260 MHz
Medium parameters used: f = 5260 MHz; σ = 5.422 S/ m; εr = 48.496; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.38, 4.38, 4.38); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.69 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.696 V/ m; Power Drift = -0.18 dB
Peak SAR (extrapolated) = 4.54 W/ kg
SAR( 1 g) = 1.13 W/ kg; SAR( 10 g) = 0.359 W/ kg
Maximum value of SAR (measured) = 2.22 W/ kg
0 dB = 2.69 W/ kg = 4.30 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 58 of 129
Date: 2014/ 10/ 1
WLAN802.11n( 40M) 5.3G_Body_Lap-held_CH 54_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5270 MHz
Medium parameters used: f = 5270 MHz; σ = 5.437 S/ m; εr = 48.46; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.38, 4.38, 4.38); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.13 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.151 V/ m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 4.18 W/ kg
SAR( 1 g) = 0.971 W/ kg; SAR( 10 g) = 0.293 W/ kg
Maximum value of SAR (measured) = 2.03 W/ kg
0 dB = 2.13 W/ kg = 3.29 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 59 of 129
Date: 2014/ 10/ 1
WLAN802.11ac( 80M) 5.3G_Body_Lap-held_CH 58_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5290 MHz
Medium parameters used: f = 5290 MHz; σ = 5.471 S/ m; εr = 48.406; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.38, 4.38, 4.38); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 1.29 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 2.943 V/ m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 2.49 W/ kg
SAR( 1 g) = 0.581 W/ kg; SAR( 10 g) = 0.204 W/ kg
Maximum value of SAR (measured) = 1.15 W/ kg
0 dB = 1.29 W/ kg = 1.10 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 60 of 129
Date: 2014/ 10/ 2
WLAN802.11a5.6G_Body_Lap-held_CH 136_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5680 MHz
Medium parameters used: f = 5680 MHz; σ = 6.013 S/ m; εr = 47.133; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(3.76, 3.76, 3.76); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.81 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 2.866 V/ m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 6.47 W/ kg
SAR( 1 g) = 1.38 W/ kg; SAR( 10 g) = 0.496 W/ kg
Maximum value of SAR (measured) = 2.73 W/ kg
0 dB = 2.81 W/ kg = 4.49 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 61 of 129
Date: 2014/ 10/ 2
WLAN802.11n( 40M) 5.6G_Body_Lap-held_CH 134_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5670 MHz
Medium parameters used: f = 5670 MHz; σ = 6.004 S/ m; εr = 47.183; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(3.76, 3.76, 3.76); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 3.42 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 2.462 V/ m; Power Drift = -0.10 dB
Peak SAR (extrapolated) = 7.65 W/ kg
SAR( 1 g) = 1.48 W/ kg; SAR( 10 g) = 0.443 W/ kg
Maximum value of SAR (measured) = 3.33 W/ kg
0 dB = 3.42 W/ kg = 5.34 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 62 of 129
Date: 2014/ 10/ 2
WLAN802.11ac( 20M) 5.6G_Body_Lap-held_CH 144_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5720 MHz
Medium parameters used: f = 5720 MHz; σ = 6.07 S/ m; εr = 47.027; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 3.14 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 2.034 V/ m; Power Drift = -0.17 dB
Peak SAR (extrapolated) = 7.51 W/ kg
SAR( 1 g) = 1.41 W/ kg; SAR( 10 g) = 0.393 W/ kg
Maximum value of SAR (measured) = 3.13 W/ kg
0 dB = 3.14 W/ kg = 4.96 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 63 of 129
Date: 2014/ 10/ 2
WLAN802.11ac( 40M) 5.6G_Body_Lap-held_CH 142_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5710 MHz
Medium parameters used: f = 5710 MHz; σ = 6.064 S/ m; εr = 47.113; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.73 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 3.006 V/ m; Power Drift = 0.15 dB
Peak SAR (extrapolated) = 6.56 W/ kg
SAR( 1 g) = 1.26 W/ kg; SAR( 10 g) = 0.391 W/ kg
Maximum value of SAR (measured) = 2.74 W/ kg
0 dB = 2.73 W/ kg = 4.37 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 64 of 129
Date: 2014/ 10/ 2
WLAN802.11ac( 80M) 5.6G_Body_Lap-held_CH 138_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5690 MHz
Medium parameters used: f = 5690 MHz; σ = 6.036 S/ m; εr = 47.166; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(3.76, 3.76, 3.76); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 3.00 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 2.589 V/ m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 7.40 W/ kg
SAR( 1 g) = 1.48 W/ kg; SAR( 10 g) = 0.469 W/ kg
Maximum value of SAR (measured) = 3.13 W/ kg
0 dB = 3.00 W/ kg = 4.78 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 65 of 129
Date: 2014/ 10/ 3
WLAN802.11a5.8G_Body_Lap-held_CH 157_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5785 MHz
Medium parameters used: f = 5785 MHz; σ = 6.154 S/ m; εr = 46.87; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 3.19 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.520 V/ m; Power Drift = 0.15 dB
Peak SAR (extrapolated) = 7.90 W/ kg
SAR( 1 g) = 1.47 W/ kg; SAR( 10 g) = 0.406 W/ kg
Maximum value of SAR (measured) = 3.33 W/ kg
0 dB = 3.19 W/ kg = 5.04 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 66 of 129
Date: 2014/ 10/ 3
WLAN802.11n( 40M) 5.8G_Body_Lap-held_CH 151_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5755 MHz
Medium parameters used: f = 5755 MHz; σ = 6.116 S/ m; εr = 46.906; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 3.92 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 0.3950 V/ m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 6.62 W/ kg
SAR( 1 g) = 1.25 W/ kg; SAR( 10 g) = 0.354 W/ kg
Maximum value of SAR (measured) = 2.72 W/ kg
0 dB = 3.92 W/ kg = 5.93 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 67 of 129
Date: 2014/ 10/ 3
WLAN802.11ac( 80M) 5.8G_Body_Lap-held_CH 155_Main
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5775 MHz
Medium parameters used: f = 5775 MHz; σ = 6.14 S/ m; εr = 46.882; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 3.09 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 2.183 V/ m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 7.61 W/ kg
SAR( 1 g) = 1.46 W/ kg; SAR( 10 g) = 0.413 W/ kg
Maximum value of SAR (measured) = 3.16 W/ kg
0 dB = 3.09 W/ kg = 4.90 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 68 of 129
Date: 2014/ 9/ 29
WLAN 802.11b_Body_Lap-held_CH 11_Aux
Communication System: WLAN802.11 b & g & n(20M)(40M); Frequency: 2462 MHz
Medium parameters used: f = 2462 MHz; σ = 2.005 S/ m; εr = 54.35; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(7.15, 7.15, 7.15); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 91x151x1) : I nterpolated grid: dx= 12 mm,
dy= 12 mm
Maximum value of SAR (interpolated) = 1.71 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x7) / Cube 0: Measurement grid:
dx= 5mm, dy= 5mm, dz= 5mm
Reference Value = 2.004 V/ m; Power Drift = -0.15 dB
Peak SAR (extrapolated) = 2.35 W/ kg
SAR( 1 g) = 0.941 W/ kg; SAR( 10 g) = 0.425 W/ kg
Maximum value of SAR (measured) = 1.48 W/ kg
0 dB = 1.48 W/ kg = 1.70 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 69 of 129
Date: 2014/ 9/ 30
WLAN802.11a5.2G_Body_Left Side_CH 48_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5240 MHz
Medium parameters used: f = 5240 MHz; σ = 5.386 S/ m; εr = 48.543; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.56, 4.56, 4.56); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 61x121x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 0.988 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.999 V/ m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 1.94 W/ kg
SAR( 1 g) = 0.520 W/ kg; SAR( 10 g) = 0.191 W/ kg
Maximum value of SAR (measured) = 0.972 W/ kg
0 dB = 0.988 W/ kg = -0.05 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 70 of 129
Date: 2014/ 9/ 30
WLAN802.11n( 40M) 5.2G_Body_Lap-held_CH 46_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5230 MHz
Medium parameters used: f = 5230 MHz; σ = 5.352 S/ m; εr = 48.565; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.56, 4.56, 4.56); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 1.63 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.027 V/ m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 3.02 W/ kg
SAR( 1 g) = 0.634 W/ kg; SAR( 10 g) = 0.173 W/ kg
Maximum value of SAR (measured) = 1.36 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 1: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.027 V/ m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 2.33 W/ kg
SAR( 1 g) = 0.596 W/ kg; SAR( 10 g) = 0.184 W/ kg
Maximum value of SAR (measured) = 1.22 W/ kg
0 dB = 1.63 W/ kg = 2.13 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 71 of 129
Date: 2014/ 9/ 30
WLAN802.11ac( 80M) 5.2G_Body_Left Side_CH 42_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5210 MHz
Medium parameters used: f = 5210 MHz; σ = 5.308 S/ m; εr = 48.605; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.56, 4.56, 4.56); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 61x121x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 0.759 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 2.319 V/ m; Power Drift = -0.13 dB
Peak SAR (extrapolated) = 1.25 W/ kg
SAR( 1 g) = 0.332 W/ kg; SAR( 10 g) = 0.119 W/ kg
Maximum value of SAR (measured) = 0.624 W/ kg
0 dB = 0.759 W/ kg = -1.20 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 72 of 129
Date: 2014/ 10/ 1
WLAN802.11a5.3G_Body_Left Side_CH 52_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5260 MHz
Medium parameters used: f = 5260 MHz; σ = 5.422 S/ m; εr = 48.496; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.38, 4.38, 4.38); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 61x121x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 0.900 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.455 V/ m; Power Drift = -0.11 dB
Peak SAR (extrapolated) = 1.80 W/ kg
SAR( 1 g) = 0.484 W/ kg; SAR( 10 g) = 0.180 W/ kg
Maximum value of SAR (measured) = 0.902 W/ kg
0 dB = 0.900 W/ kg = -0.46 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 73 of 129
Date: 2014/ 10/ 1
WLAN802.11n( 40M) 5.3G_Body_Left Side_CH 54_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5270 MHz
Medium parameters used: f = 5270 MHz; σ = 5.437 S/ m; εr = 48.46; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.38, 4.38, 4.38); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 61x121x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 1.20 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.586 V/ m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 2.44 W/ kg
SAR( 1 g) = 0.649 W/ kg; SAR( 10 g) = 0.239 W/ kg
Maximum value of SAR (measured) = 1.20 W/ kg
0 dB = 1.20 W/ kg = 0.77 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 74 of 129
Date: 2014/ 10/ 1
WLAN802.11ac( 80M) 5.3G_Body_Left Side_CH 58_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5290 MHz
Medium parameters used: f = 5290 MHz; σ = 5.471 S/ m; εr = 48.406; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.38, 4.38, 4.38); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 61x121x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 0.643 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.518 V/ m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 1.25 W/ kg
SAR( 1 g) = 0.331 W/ kg; SAR( 10 g) = 0.120 W/ kg
Maximum value of SAR (measured) = 0.611 W/ kg
0 dB = 0.643 W/ kg = -1.92 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 75 of 129
Date: 2014/ 10/ 2
WLAN802.11a5.6G_Body_Lap-held_CH 108_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5540 MHz
Medium parameters used: f = 5540 MHz; σ = 5.825 S/ m; εr = 47.654; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(3.76, 3.76, 3.76); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 3.19 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.573 V/ m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 6.81 W/ kg
SAR( 1 g) = 1.34 W/ kg; SAR( 10 g) = 0.336 W/ kg
Maximum value of SAR (measured) = 2.89 W/ kg
0 dB = 3.19 W/ kg = 5.04 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 76 of 129
Date: 2014/ 10/ 2
WLAN802.11n( 40M) 5.6G_Body_Lap-held_CH 134_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5670 MHz
Medium parameters used: f = 5670 MHz; σ = 6.004 S/ m; εr = 47.183; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(3.76, 3.76, 3.76); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.81 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.878 V/ m; Power Drift = 0.16 dB
Peak SAR (extrapolated) = 7.56 W/ kg
SAR( 1 g) = 1.43 W/ kg; SAR( 10 g) = 0.372 W/ kg
Maximum value of SAR (measured) = 3.04 W/ kg
0 dB = 2.81 W/ kg = 4.48 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 77 of 129
Date: 2014/ 10/ 2
WLAN802.11ac( 20M) 5.6G_Body_Lap-held_CH 144_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5720 MHz
Medium parameters used: f = 5720 MHz; σ = 6.07 S/ m; εr = 47.027; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.32 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 0.4980 V/ m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 6.06 W/ kg
SAR( 1 g) = 1.19 W/ kg; SAR( 10 g) = 0.294 W/ kg
Maximum value of SAR (measured) = 2.59 W/ kg
0 dB = 2.32 W/ kg = 3.65 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 78 of 129
Date: 2014/ 10/ 2
WLAN802.11ac( 40M) 5.6G_Body_Lap-held_CH 142_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5710 MHz
Medium parameters used: f = 5710 MHz; σ = 6.064 S/ m; εr = 47.113; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.11 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.412 V/ m; Power Drift = 0.17 dB
Peak SAR (extrapolated) = 5.79 W/ kg
SAR( 1 g) = 1.08 W/ kg; SAR( 10 g) = 0.286 W/ kg
Maximum value of SAR (measured) = 2.39 W/ kg
0 dB = 2.11 W/ kg = 3.23 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 79 of 129
Date: 2014/ 10/ 2
WLAN802.11ac( 80M) 5.6G_Body_Lap-held_CH 138_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5690 MHz
Medium parameters used: f = 5690 MHz; σ = 6.036 S/ m; εr = 47.166; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(3.76, 3.76, 3.76); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 1.07 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 2.080 V/ m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 1.89 W/ kg
SAR( 1 g) = 0.401 W/ kg; SAR( 10 g) = 0.102 W/ kg
Maximum value of SAR (measured) = 0.944 W/ kg
0 dB = 1.07 W/ kg = 0.30 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 80 of 129
Date: 2014/ 10/ 3
WLAN802.11a5.8G_Body_Lap-held_CH 165_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5825 MHz
Medium parameters used: f = 5825 MHz; σ = 6.205 S/ m; εr = 46.718; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.44 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.288 V/ m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 6.28 W/ kg
SAR( 1 g) = 1.22 W/ kg; SAR( 10 g) = 0.317 W/ kg
Maximum value of SAR (measured) = 2.70 W/ kg
0 dB = 2.44 W/ kg = 3.87 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 81 of 129
Date: 2014/ 10/ 3
WLAN802.11n( 40M) 5.8G_Body_Lap-held_CH 151_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5755 MHz
Medium parameters used: f = 5755 MHz; σ = 6.116 S/ m; εr = 46.906; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 2.06 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 0.7760 V/ m; Power Drift = 0.15 dB
Peak SAR (extrapolated) = 5.62 W/ kg
SAR( 1 g) = 1.07 W/ kg; SAR( 10 g) = 0.286 W/ kg
Maximum value of SAR (measured) = 2.36 W/ kg
0 dB = 2.06 W/ kg = 3.13 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 82 of 129
Date: 2014/ 10/ 3
WLAN802.11ac( 80M) 5.8G_Body_Lap-held_CH 155_Aux
Communication System: WLAN 802.11n/ a(5G) FCC ; Frequency: 5775 MHz
Medium parameters used: f = 5775 MHz; σ = 6.14 S/ m; εr = 46.882; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 81x161x1) : I nterpolated grid: dx= 10 mm,
dy= 10 mm
Maximum value of SAR (interpolated) = 1.61 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x12) / Cube 0: Measurement grid:
dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 1.359 V/ m; Power Drift = 0.16 dB
Peak SAR (extrapolated) = 4.16 W/ kg
SAR( 1 g) = 0.843 W/ kg; SAR( 10 g) = 0.215 W/ kg
Maximum value of SAR (measured) = 1.84 W/ kg
0 dB = 1.61 W/ kg = 2.06 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 83 of 129
Date: 2014/ 9/ 29
Bluetooth_Body-w orn_Lap-held_CH 78_Aux
Communication System: Bluetooth ; Frequency: 2480 MHz
Medium parameters used: f = 2480 MHz; σ = 2.024 S/ m; εr = 54.214; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(7.15, 7.15, 7.15); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ Body/ Area Scan ( 61x131x1) : I nterpolated grid: dx= 12 mm,
dy= 12 mm
Maximum value of SAR (interpolated) = 0.0916 W/ kg
Configuration/ Body/ Zoom Scan ( 7x7x7) / Cube 0: Measurement grid:
dx= 5mm, dy= 5mm, dz= 5mm
Reference Value = 1.505 V/ m; Power Drift = -0.19 dB
Peak SAR (extrapolated) = 0.118 W/ kg
SAR( 1 g) = 0.022 W/ kg; SAR( 10 g) = 0.010 W/ kg
Maximum value of SAR (measured) = 0.0733 W/ kg
0 dB = 0.0916 W/ kg = -10.38 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 84 of 129
6. SAR System Performance Verification
Date: 2014/ 9/ 29
Dipole 2450 MHz_SN:922_Body
Communication System: CW; Frequency: 2450 MHz
Medium parameters used: f = 2450 MHz; σ = 1.992 S/ m; εr = 54.392; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(7.15, 7.15, 7.15); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ d= 10mm, Pin= 250mW, dist= 2mm: I nterpolated grid: dx= 12
mm, dy= 12 mm
Maximum value of SAR (interpolated) = 20.9 W/ kg
Configuration/ d= 10mm, Pin= 250mW, dist= 2mm / Cube 0: Measurement
grid: dx= 5mm, dy= 5mm, dz= 5mm
Reference Value = 99.42 V/ m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 26.6 W/ kg
SAR( 1 g) = 12.9 W/ kg; SAR( 10 g) = 5.97 W/ kg
Maximum value of SAR (measured) = 19.5 W/ kg
0 dB = 19.5 W/ kg = 12.90 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 85 of 129
Date: 2014/ 9/ 30
Dipole 5200 MHz_SN:1104_Body
Communication System:CW; Frequency: 5200 MHz
Medium parameters used: f = 5200 MHz; σ = 5.299 S/ m; εr = 48.622; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.56, 4.56, 4.56); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ d= 10mm, Pin= 100mW, dist= 2mm: I nterpolated grid: dx= 10
mm, dy= 10 mm
Maximum value of SAR (interpolated) = 15.2 W/ kg
Configuration/ d= 10mm, Pin= 100mW, dist= 2mm/ Cube 0: Measurement
grid: dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 58.37 V/ m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 26.5 W/ kg
SAR( 1 g) = 7.68 W/ kg; SAR( 10 g) = 2.14 W/ kg
Maximum value of SAR (measured) = 15.2 W/ kg
0 dB = 15.2 W/ kg = 11.82 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 86 of 129
Date: 2014/ 10/ 1
Dipole 5300 MHz_SN: 1104_Body
Communication System:CW; Frequency: 5300 MHz
Medium parameters used: f = 5300 MHz; σ = 5.489 S/ m; εr = 48.387; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.38, 4.38, 4.38); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom:Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ d= 10mm, Pin= 100mW, dist= 2mm: I nterpolated grid: dx= 10
mm, dy= 10 mm
Maximum value of SAR (interpolated) = 15.4 W/ kg
Configuration/ d= 10mm, Pin= 100mW, dist= 2mm/ Cube 0: Measurement
grid: dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 57.95 V/ m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 26.9 W/ kg
SAR( 1 g) = 7.8 W/ kg; SAR( 10 g) = 2.27 W/ kg
Maximum value of SAR (measured) = 15.4 W/ kg
0 dB = 15.4 W/ kg = 11.86 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 87 of 129
Date: 2014/ 10/ 2
Dipole 5600 MHz_SN: 1104_Body
Communication System:CW; Frequency: 5600 MHz
Medium parameters used: f = 5600 MHz; σ = 5.898 S/ m; εr = 47.406; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(3.76, 3.76, 3.76); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom:Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ d= 10mm, Pin= 100mW, dist= 2mm: I nterpolated grid: dx= 10
mm, dy= 10 mm
Maximum value of SAR (interpolated) = 19.5 W/ kg
Configuration/ d= 10mm, Pin= 100mW, dist= 2mm / Cube 0: Measurement
grid: dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 62.32 V/ m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 41.0 W/ kg
SAR( 1 g) = 8.33 W/ kg; SAR( 10 g) = 2.34 W/ kg
Maximum value of SAR (measured) = 19.3 W/ kg
0 dB = 19.5 W/ kg = 12.91 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 88 of 129
Date: 2014/ 10/ 3
Dipole 5800 MHz_SN: 1104_Body
Communication System:CW; Frequency: 5800 MHz
Medium parameters used: f = 5800 MHz; σ = 6.177 S/ m; εr = 46.85; ρ = 1000 kg/ m 3
Phantom section: Flat Section
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(4.13, 4.13, 4.13); Calibrated: 4/ 24/ 2014;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 8/ 27/ 2014
 Phantom: Body;
 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331)
Configuration/ d= 10mm, Pin= 100mW, dist= 2mm: I nterpolated grid: dx= 10
mm, dy= 10 mm
Maximum value of SAR (interpolated) = 16.9 W/ kg
Configuration/ d= 10mm, Pin= 100mW, dist= 2mm / Cube 0: Measurement
grid: dx= 4mm, dy= 4mm, dz= 2mm
Reference Value = 56.81 V/ m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 37.1 W/ kg
SAR( 1 g) = 7.77 W/ kg; SAR( 10 g) = 2.13 W/ kg
Maximum value of SAR (measured) = 16.9 W/ kg
0 dB = 16.9 W/ kg = 12.29 dBW/ kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 89 of 129
7. DAE & Probe Calibration Certificate
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 90 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 91 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 92 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 93 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 94 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 95 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 96 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 97 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 98 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 99 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 100 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 101 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 102 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 103 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 104 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 105 of 129
8. Uncertainty Budget
Measurement Uncertainty evaluation template for DUT SAR test
I EEE 1528
Source of Uncertainty
T olerance/ Probability
Uncertainty Distributioi
Div
Div Value
ci (1g)
h= c * f / e
i= c * g / e
ci (10g)
Standard
uncertainty
Standard
uncertainty
vi, or Veff
Measurement system
6.55%
6.55%
∞
√3
1.732
2.02%
2.02%
∞
√3
1.732
5.54%
5.54%
∞
1.00%
√3
1.732
0.58%
0.58%
∞
Linearity
4.70%
√3
1.732
2.71%
2.71%
∞
Detection Limits
1.00%
√3
1.732
0.58%
0.58%
∞
Readout Electronics
0.30%
0.30%
0.30%
∞
Response time
0.80%
√3
1.732
0.46%
0.46%
∞
I ntegration Time
2.60%
√3
1.732
1.50%
1.50%
∞
Measurement drift
( class A evaluation)
1.75%
√3
1.732
1.01%
1.01%
∞
3.00%
√3
1.732
1.73%
1.73%
∞
3.00%
√3
1.732
1.73%
1.73%
∞
0.40%
√3
1.732
0.23%
0.23%
∞
2.90%
√3
1.732
1.67%
1.67%
∞
Post-processing
1.00%
√3
1.732
0.58%
0.58%
∞
Max SAR Eval
1.00%
√3
1.732
0.58%
0.58%
∞
Test sample positioning
2.90%
2.90%
2.90%
M-1
Device Holder Uncertainty
3.60%
3.60%
3.60%
M-1
Drift of output power
5.00%
√3
1.732
2.89%
2.89%
∞
Phantom Uncertainty
4.00%
√3
1.732
2.31%
2.31%
∞
Deviation from reference
liquid target ε ’r(Body)
3.33%
0.64
0.43
2.13%
1.43%
Deviation from reference
liquid target σ (Body)
3.27%
0.6
0.49
1.96%
1.60%
11.93%
11.77%
23.86%
23.54%
Probe calibration
6.55%
I sotropy , Axial
3.50%
I sotropy,
Hemispherical
9.60%
Boundary Effect
RF ambient condition noise
RF ambient conditions reflections
Probe positioner
Mechanical restrictions
Probe Positioning with
respect to phantom shell
Test Sample related
Phantom and Setup
Combined standard
uncertainty
Expant uncertainty (95%
confidence interval), K= 2
RSS
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 106 of 129
9. Phantom Description
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 107 of 129
10. System Validation from Original Equipment Supplier
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 108 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 109 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 110 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 111 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 112 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 113 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 114 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 115 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 116 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 117 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 118 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 119 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 120 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 121 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 122 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 123 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 124 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 125 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 126 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 127 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 128 of 129
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/ 2014/ 90002
Page : 129 of 129
- End of 1 st part of report -
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.
sgs.
com/
er
ms_
and_condi
ons.
ht
m and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.
sgs.
com/
er
ms_edocument
ht
m. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (8862) 22993279
f (8862) 22980488
www.tw.sgs.com
Member of SGS Group
Download: 7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Mirror Download [FCC.gov]7265NG 7265NGW RF Exposure Info RF Exposure SAR Report Acer orporated
Document ID2431827
Application IDYdyYsPEzFb6VPLqpfaA/nw==
Document DescriptionRF Exposure SAR Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize135.57kB (1694614 bits)
Date Submitted2014-10-30 00:00:00
Date Available2014-11-03 00:00:00
Creation Date2018-03-04 21:17:06
Producing SoftwareGPL Ghostscript 9.21
Document Lastmod2018-03-04 21:17:06
Document TitleRF Exposure SAR Report
Document CreatorPScript5.dll Version 5.2.2
Document Author: Regina_Yeh

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : Regina_Yeh
Create Date                     : 2014:10:22 14:42:48+08:00
Modify Date                     : 2014:10:22 14:45:13+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:10:22 14:45:13+08:00
Producer                        : Acrobat Distiller 10.1.12 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - E5201490002 Acer Thors Intel7265 FCC SAR report.doc
Creator                         : Regina_Yeh
Document ID                     : uuid:5c55e341-7bd4-4965-9cdc-d2152ad3adf3
Instance ID                     : uuid:9a77fcd3-01dd-4860-a920-aafd0bc87503
Page Count                      : 129