TR-0143-E XL-185P, 7/8/900 MHz, PORTABLE LAND MOBILE RADIO RF Exposure Info RF Exposure SAR with LTE 2 HARRIS CORPORATION

HARRIS CORPORATION XL-185P, 7/8/900 MHz, PORTABLE LAND MOBILE RADIO

FCC ID Filing: OWDTR-0143-E
Purchase on Amazon: XL-185P, 7/8/900 MHz, PORTABLE LAND MOBILE RADIO

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of TR-0143-E XL-185P, 7/8/900 MHz, PORTABLE LAND MOBILE RADIO RF Exposure Info RF Exposure SAR with LTE 2 HARRIS CORPORATION

Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
APPENDIX A – SYSTEM VERIFICATION PLOTS
Date/Time: 19/12/2016 2:47:18 PM
Test Laboratory: Celltech Labs
DUT: Dipole 835 MHz; Type: D835V2; Serial: 4d075
Program Name: SPC 835B
Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; ı = 0.98 mho/m; İr = 53.3; ȡ = 1000 kg/m3
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Body d=15mm Pin=250mW. TS=[2.178][2.42][2.662]W/kg/Area Scan (5x7x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.58 mW/g
Body d=15mm Pin=250mW. TS=[2.178][2.42][2.662]W/kg/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 58.1 V/m; Power Drift = -0.00 dB
Peak SAR (extrapolated) = 3.60 W/kg
SAR(1 g) = 2.39 mW/g; SAR(10 g) = 1.55 mW/g
Maximum value of SAR (measured) = 2.57 mW/g
Body d=15mm Pin=250mW. TS=[2.178][2.42][2.662]W/kg/Z Scan (1x1x42): Measurement grid: dx=20mm, dy=20mm, dz=5mm
Maximum value of SAR (interpolated) = 3.15 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 49 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 50 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Date/Time: 28/12/2016 10:53:28 AM
Test Laboratory: Celltech Labs
DUT: Dipole 835 MHz; Type: D835V2; Serial: 4d075
Program Name: SPC 835B
Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; ı = 0.96 mho/m; İr = 51.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Body d=15mm Pin=250mW. TS=[2.178][2.42][2.662]W/kg/Area Scan (5x7x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.69 mW/g
Body d=15mm Pin=250mW. TS=[2.178][2.42][2.662]W/kg/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 57.5 V/m; Power Drift = 0.019 dB
Peak SAR (extrapolated) = 3.79 W/kg
SAR(1 g) = 2.51 mW/g; SAR(10 g) = 1.62 mW/g
Maximum value of SAR (measured) = 2.70 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 51 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 52 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Date/Time: 29/12/2016 10:42:32 AM
Test Laboratory: Celltech Labs
DUT: Dipole 835 MHz; Type: D835V2; Serial: 411
Program Name: SPC 835H
Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; ı = 0.93 mho/m; İr = 41.9; ȡ = 1000 kg/m3
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Head d=15mm Pin=250mW. TS=[2.169][2.41][2.651]W/kg/Area Scan (5x7x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.68 mW/g
Head d=15mm Pin=250mW. TS=[2.169][2.41][2.651]W/kg/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 58.9 V/m; Power Drift = -0.00 dB
Peak SAR (extrapolated) = 3.87 W/kg
SAR(1 g) = 2.5 mW/g; SAR(10 g) = 1.6 mW/g
Maximum value of SAR (measured) = 2.70 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 53 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 54 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Date/Time: 03/01/2017 10:41:18 AM
Test Laboratory: Celltech Labs
DUT: Dipole 835 MHz; Type: D835V2; Serial: 411
Program Name: SPC 835H
Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; ı = 0.91 mho/m; İr = 41.3; ȡ = 1000 kg/m3
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Head d=15mm Pin=250mW. TS=[2.169][2.41][2.651]W/kg/Area Scan (5x7x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.60 mW/g
Head d=15mm Pin=250mW. TS=[2.169][2.41][2.651]W/kg/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 58.6 V/m; Power Drift = -0.046 dB
Peak SAR (extrapolated) = 3.64 W/kg
SAR(1 g) = 2.37 mW/g; SAR(10 g) = 1.53 mW/g
Maximum value of SAR (measured) = 2.55 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 55 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 56 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Date/Time: 05/01/2017 10:06:20 AM
Test Laboratory: Celltech Labs
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 825
Program Name: 2450MHz Body SPC
Communication System: WiFi; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; ı = 2.03 mho/m; İr = 49.7; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 5mm (Mechanical Surface Detection)Sensor-Surface: 3mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
2450MHz Body Dipole d=10mm P=250mW TS=[11.7][13.0][14.3]/Area Scan (5x7x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 12.5 mW/g
2450MHz Body Dipole d=10mm P=250mW TS=[11.7][13.0][14.3]/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 92.5 V/m; Power Drift = -0.049 dB
Peak SAR (extrapolated) = 28.5 W/kg
SAR(1 g) = 12.9 mW/g; SAR(10 g) = 5.78 mW/g
Maximum value of SAR (measured) = 16.9 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 57 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 58 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Date/Time: 09/01/2017 1:12:32 PM
Test Laboratory: Celltech Labs
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 825
Program Name: 2450MHz Head SPC
Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; ı = 1.93 mho/m; İr = 39.5; ȡ = 1000 kg/m3
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.37, 6.37, 6.37); Calibrated: 27/04/2016
- Sensor-Surface: 5mm (Mechanical Surface Detection)Sensor-Surface: 3mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
2450 MHz Head Dipole d=10mm P=250mW TS=[11.79][13.1][14.41]/Area Scan (5x7x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 14.6 mW/g
2450 MHz Head Dipole d=10mm P=250mW TS=[11.79][13.1][14.41]/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 102.6 V/m; Power Drift = -0.013 dB
Peak SAR (extrapolated) = 25.8 W/kg
SAR(1 g) = 12.2 mW/g; SAR(10 g) = 5.64 mW/g
Maximum value of SAR (measured) = 15.9 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 59 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 60 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Date/Time: 11/01/2017 12:51:58 PM
Test Laboratory: Celltech Labs
DUT: Dipole 5GHz; Type: D5GHzV2; Serial: 1031
Program Name: 5200 MHz SPC
Communication System: CW; Frequency: 5250 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5250 MHz; ı = 5.64 mho/m; İr = 48.4; ȡ = 1000 kg/m3
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(3.88, 3.88, 3.88); Calibrated: 27/04/2016
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
5200-5800 MHz Dipole d=10mm P=50mW, TS=7.26/Area Scan (3x5x1): Measurement grid: dx=5mm, dy=5mm
Maximum value of SAR (measured) = 7.42 mW/g
5200-5800 MHz Dipole d=10mm P=50mW, TS=7.26/Zoom Scan (7x7x5)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 33.6 V/m; Power Drift = -0.166 dB
Peak SAR (extrapolated) = 14.2 W/kg
SAR(1 g) = 3.55 mW/g; SAR(10 g) = 0.992 mW/g
Maximum value of SAR (measured) = 7.47 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 61 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 62 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Date/Time: 16/01/2017 12:39:36 PM
Test Laboratory: Celltech Labs
DUT: Dipole 5GHz; Type: D5GHzV2; Serial: 1031
Program Name: 5200 MHz SPC
Communication System: CW; Frequency: 5250 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5250 MHz; ı = 5 mho/m; İr = 36.2; ȡ = 1000 kg/m3
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(4.41, 4.41, 4.41); Calibrated: 27/04/2016
- Sensor-Surface: 2mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
5200-5800 MHz Dipole d=10mm P=48.6 mW, TS=3.88/Area Scan (3x5x1): Measurement grid: dx=5mm, dy=5mm
Maximum value of SAR (measured) = 8.32 mW/g
5200-5800 MHz Dipole d=10mm P=48.6 mW, TS=3.88/Zoom Scan (7x7x5)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2.5mm
Reference Value = 47.4 V/m; Power Drift = -0.160 dB
Peak SAR (extrapolated) = 16.7 W/kg
SAR(1 g) = 4.06 mW/g; SAR(10 g) = 1.16 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 63 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 64 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
APPENDIX B – MEASUREMENT PLOTS OF MAXIMUM MEASURED SAR
Plot B1
Date/Time: 21/12/2016 9:46:07 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 768 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 768 MHz; ı = 0.903 mho/m; İr = 52.3; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B1 Body, XL-185, 768MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 3.18 mW/g
B1 Body, XL-185, 768MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 39.0 V/m; Power Drift = 0.107 dB
Peak SAR (extrapolated) = 4.29 W/kg
SAR(1 g) = 3.15 mW/g; SAR(10 g) = 2.24 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 3.35 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 65 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B2
Date/Time: 21/12/2016 10:06:35 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 776 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 776 MHz; ı = 0.911 mho/m; İr = 52.4; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B2 Body, XL-185, 776MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 4.44 mW/g
B2 Body, XL-185, 776MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 35.2 V/m; Power Drift = -0.210 dB
Peak SAR (extrapolated) = 6.09 W/kg
SAR(1 g) = 4.43 mW/g; SAR(10 g) = 3.12 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 4.72 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 66 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B3
Date/Time: 21/12/2016 10:30:17 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 798 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 798 MHz; ı = 0.93 mho/m; İr = 52; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B3 Body, XL-185, 798MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 4.13 mW/g
B3 Body, XL-185, 798MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 27.8 V/m; Power Drift = 0.085 dB
Peak SAR (extrapolated) = 5.19 W/kg
SAR(1 g) = 3.87 mW/g; SAR(10 g) = 2.77 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 4.11 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 67 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B4
Date/Time: 21/12/2016 10:59:23 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 806 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 806 MHz; ı = 0.931 mho/m; İr = 52.2; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B4 Body, XL-185, 806MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 5.70 mW/g
B4 Body, XL-185, 806MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 28.1 V/m; Power Drift = -0.090 dB
Peak SAR (extrapolated) = 7.10 W/kg
SAR(1 g) = 5.28 mW/g; SAR(10 g) = 3.79 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 5.60 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 68 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B5
Date/Time: 21/12/2016 11:19:54 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 816 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 816 MHz; ı = 0.942 mho/m; İr = 51.8; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B5 Body, XL-185, 816MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 6.01 mW/g
B5 Body, XL-185, 816MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 32.6 V/m; Power Drift = -0.215 dB
Peak SAR (extrapolated) = 7.50 W/kg
SAR(1 g) = 5.57 mW/g; SAR(10 g) = 3.99 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 5.91 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 69 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B6
Date/Time: 21/12/2016 11:41:15 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 851 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 851 MHz; ı = 0.982 mho/m; İr = 51.2; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B6 Body, XL-185, 851MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 6.34 mW/g
B6 Body, XL-185, 851MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 35.0 V/m; Power Drift = -0.204 dB
Peak SAR (extrapolated) = 7.87 W/kg
SAR(1 g) = 5.81 mW/g; SAR(10 g) = 4.14 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 6.16 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 70 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B7
Date/Time: 21/12/2016 12:04:11 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 861 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 861 MHz; ı = 0.99 mho/m; İr = 51.4; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B7 Body, XL-185, 861MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.52 mW/g
B7 Body, XL-185, 861MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 32.8 V/m; Power Drift = -0.208 dB
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.17 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 71 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B8
Date/Time: 21/12/2016 12:27:21 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.02 mho/m; İr = 51.1; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B8 Body, XL-185, 896MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 10.2 mW/g
B8 Body, XL-185, 896MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 26.2 V/m; Power Drift = -0.170 dB
Peak SAR (extrapolated) = 12.9 W/kg
SAR(1 g) = 9.36 mW/g; SAR(10 g) = 6.55 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.95 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 72 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 73 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B9
Date/Time: 21/12/2016 2:56:44 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 901 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 901 MHz; ı = 1.04 mho/m; İr = 51; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B9 Body, XL-185, 901MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.60 mW/g
B9 Body, XL-185, 901MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 21.3 V/m; Power Drift = -0.202 dB
Peak SAR (extrapolated) = 12.5 W/kg
SAR(1 g) = 9.08 mW/g; SAR(10 g) = 6.37 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.64 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 74 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B10
Date/Time: 21/12/2016 2:18:32 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 935 MHz;Duty Cycle: 1:1
Medium parameters used: f = 935 MHz; ı = 1.07 mho/m; İr = 50.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B10 Body, XL-185, 935MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 9.74 mW/g
B10 Body, XL-185, 935MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 16.1 V/m; Power Drift = -0.217 dB
Peak SAR (extrapolated) = 12.3 W/kg
SAR(1 g) = 8.86 mW/g; SAR(10 g) = 6.15 mW/g
Maximum value of SAR (measured) = 9.46 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 75 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B12
Date/Time: 21/12/2016 3:51:12 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.02 mho/m; İr = 51.1; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B12 w/c Body, XL-185, 896MHz, ant 4450-01, bat 4010-04, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.48 mW/g
B12 w/c Body, XL-185, 896MHz, ant 4450-01, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 22.6 V/m; Power Drift = -0.134 dB
Peak SAR (extrapolated) = 12.2 W/kg
SAR(1 g) = 8.81 mW/g; SAR(10 g) = 6.16 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.39 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 76 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B13
Date/Time: 22/12/2016 12:25:27 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 768 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 768 MHz; ı = 0.903 mho/m; İr = 52.3; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B13 Body, XL-185, 768MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 5.07 mW/g
B13 Body, XL-185, 768MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 54.3 V/m; Power Drift = -0.021 dB
Peak SAR (extrapolated) = 7.23 W/kg
SAR(1 g) = 5.3 mW/g; SAR(10 g) = 3.77 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 5.64 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 77 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B14
Date/Time: 22/12/2016 12:46:21 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 776 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 776 MHz; ı = 0.911 mho/m; İr = 52.4; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B14 Body, XL-185, 776MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 6.46 mW/g
B14 Body, XL-185, 776MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 44.4 V/m; Power Drift = -0.056 dB
Peak SAR (extrapolated) = 8.96 W/kg
SAR(1 g) = 6.62 mW/g; SAR(10 g) = 4.7 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.07 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 78 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B15
Date/Time: 22/12/2016 1:05:07 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 798 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 798 MHz; ı = 0.93 mho/m; İr = 52; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B15 Body, XL-185, 798MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.83 mW/g
B15 Body, XL-185, 798MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 42.7 V/m; Power Drift = 0.055 dB
Peak SAR (extrapolated) = 10.5 W/kg
SAR(1 g) = 7.67 mW/g; SAR(10 g) = 5.35 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 8.13 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 79 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B16
Date/Time: 22/12/2016 1:20:59 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 806 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 806 MHz; ı = 0.931 mho/m; İr = 52.2; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B16 Body, XL-185, 806MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.61 mW/g
B16 Body, XL-185, 806MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 49.2 V/m; Power Drift = -0.080 dB
Peak SAR (extrapolated) = 13.0 W/kg
SAR(1 g) = 9.41 mW/g; SAR(10 g) = 6.52 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.99 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 80 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B17
Date/Time: 22/12/2016 1:40:19 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 816 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 816 MHz; ı = 0.942 mho/m; İr = 51.8; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B17 Body, XL-185, 816MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.01 mW/g
B17 Body, XL-185, 816MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 55.8 V/m; Power Drift = -0.126 dB
Peak SAR (extrapolated) = 10.1 W/kg
SAR(1 g) = 7.29 mW/g; SAR(10 g) = 5.04 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.74 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 81 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B18
Date/Time: 22/12/2016 2:43:49 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 851 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 851 MHz; ı = 0.982 mho/m; İr = 51.2; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B18 Body, XL-185, 851MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.16 mW/g
B18 Body, XL-185, 851MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 56.8 V/m; Power Drift = -0.117 dB
Peak SAR (extrapolated) = 13.6 W/kg
SAR(1 g) = 9.89 mW/g; SAR(10 g) = 6.72 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 10.6 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 82 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B19
Date/Time: 22/12/2016 3:03:38 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 861 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 861 MHz; ı = 0.99 mho/m; İr = 51.4; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B19 Body, XL-185, 861MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.68 mW/g
B19 Body, XL-185, 861MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 56.6 V/m; Power Drift = -0.145 dB
Peak SAR (extrapolated) = 13.9 W/kg
SAR(1 g) = 10.1 mW/g; SAR(10 g) = 6.9 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 10.8 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 83 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B20
Date/Time: 22/12/2016 3:24:18 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.02 mho/m; İr = 51.1; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B20 Body, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 10.4 mW/g
B20 Body, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 53.1 V/m; Power Drift = -0.219 dB
Peak SAR (extrapolated) = 15.0 W/kg
SAR(1 g) = 10.7 mW/g; SAR(10 g) = 7.14 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 11.5 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 84 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 85 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B21
Date/Time: 22/12/2016 3:43:44 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 901 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 901 MHz; ı = 1.04 mho/m; İr = 51; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B21 Body, XL-185, 901MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 10.2 mW/g
B21 Body, XL-185, 901MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 55.2 V/m; Power Drift = -0.200 dB
Peak SAR (extrapolated) = 15.0 W/kg
SAR(1 g) = 10.7 mW/g; SAR(10 g) = 7.08 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 11.4 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 86 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B22
Date/Time: 23/12/2016 9:08:00 AM
Test Laboratory: The name of your organization
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 935 MHz;Duty Cycle: 1:1
Medium parameters used: f = 935 MHz; ı = 1.07 mho/m; İr = 50.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B22 Body, XL-185, 935MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 8.09 mW/g
B22 Body, XL-185, 935MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 54.3 V/m; Power Drift = -0.013 dB
Peak SAR (extrapolated) = 12.6 W/kg
SAR(1 g) = 8.82 mW/g; SAR(10 g) = 5.66 mW/g
Maximum value of SAR (measured) = 9.36 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 87 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B25
Date/Time: 23/12/2016 10:11:59 AM
Test Laboratory: The name of your organization
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.02 mho/m; İr = 51.1; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B25 w/c Body, XL-185, 896MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.06 mW/g
B25 w/c Body, XL-185, 896MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 47.8 V/m; Power Drift = -0.074 dB
Peak SAR (extrapolated) = 13.3 W/kg
SAR(1 g) = 9.56 mW/g; SAR(10 g) = 6.37 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 10.2 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 88 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B26
Date/Time: 23/12/2016 10:34:55 AM
Test Laboratory: The name of your organization
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 901 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 901 MHz; ı = 1.04 mho/m; İr = 51; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B26 w/c Body, XL-185, 901MHz, ant 44450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.98 mW/g
B26 w/c Body, XL-185, 901MHz, ant 44450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 50.3 V/m; Power Drift = -0.113 dB
Peak SAR (extrapolated) = 12.4 W/kg
SAR(1 g) = 8.95 mW/g; SAR(10 g) = 5.97 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.54 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 89 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B27
Date/Time: 23/12/2016 11:16:04 AM
Test Laboratory: The name of your organization
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.02 mho/m; İr = 51.1; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B27 Body, XL-185, 896MHz, ant 11223/02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 6.05 mW/g
B27 Body, XL-185, 896MHz, ant 11223/02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 47.4 V/m; Power Drift = -0.173 dB
Peak SAR (extrapolated) = 9.41 W/kg
SAR(1 g) = 6.78 mW/g; SAR(10 g) = 4.53 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.22 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 90 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B28
Date/Time: 23/12/2016 11:43:43 AM
Test Laboratory: The name of your organization
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 901 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 901 MHz; ı = 1.04 mho/m; İr = 51; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B28 Body, XL-185, 901MHz, ant 11223/02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.04 mW/g
B28 Body, XL-185, 901MHz, ant 11223/02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 50.6 V/m; Power Drift = -0.221 dB
Peak SAR (extrapolated) = 10.1 W/kg
SAR(1 g) = 7.24 mW/g; SAR(10 g) = 4.79 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 7.75 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 91 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B29
Date/Time: 23/12/2016 12:32:55 PM
Test Laboratory: The name of your organization
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 935 MHz;Duty Cycle: 1:1
Medium parameters used: f = 935 MHz; ı = 1.07 mho/m; İr = 50.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B29 Body, XL-185, 935MHz, ant 11223/02, bat 4010-01, Lotus 2/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 10.2 mW/g
B29 Body, XL-185, 935MHz, ant 11223/02, bat 4010-01, Lotus 2/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 55.6 V/m; Power Drift = -0.219 dB
Peak SAR (extrapolated) = 13.9 W/kg
SAR(1 g) = 9.8 mW/g; SAR(10 g) = 6.34 mW/g
Maximum value of SAR (measured) = 10.4 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 92 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 93 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B31
Date/Time: 23/12/2016 1:15:40 PM
Test Laboratory: The name of your organization
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 935 MHz;Duty Cycle: 1:1
Medium parameters used: f = 935 MHz; ı = 1.07 mho/m; İr = 50.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B31 w/c Body, XL-185, 935MHz, ant 11223/02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 8.35 mW/g
B31 w/c Body, XL-185, 935MHz, ant 11223/02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 54.8 V/m; Power Drift = -0.198 dB
Peak SAR (extrapolated) = 11.3 W/kg
SAR(1 g) = 7.9 mW/g; SAR(10 g) = 5.16 mW/g
Maximum value of SAR (measured) = 8.45 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 94 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B32
Date/Time: 28/12/2016 12:51:23 PM
Test Laboratory: Celltech Labs
DUT: 789-E00006 & 789-E00008; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.04 mho/m; İr = 53; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B32 w/c Body, bc 0218-01, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm,
dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.86 mW/g
B32 w/c Body, bc 0218-01, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid:
dx=7.5mm, dy=7.5mm, dz=5mm
Reference Value = 34.8 V/m; Power Drift = 0.048 dB
Peak SAR (extrapolated) = 3.89 W/kg
SAR(1 g) = 2.62 mW/g; SAR(10 g) = 1.92 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.77 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 95 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B33
Date/Time: 28/12/2016 1:10:37 PM
Test Laboratory: Celltech Labs
DUT: 789-E00006 & 789-E00008; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.04 mho/m; İr = 53; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B33 w/c Body, bc 1609/1, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm,
dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.32 mW/g
B33 w/c Body, bc 1609/1, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid:
dx=7.5mm, dy=7.5mm, dz=5mm
Reference Value = 32.0 V/m; Power Drift = 0.042 dB
Peak SAR (extrapolated) = 2.87 W/kg
SAR(1 g) = 2.22 mW/g; SAR(10 g) = 1.67 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 96 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B34
Date/Time: 28/12/2016 2:38:58 PM
Test Laboratory: Celltech Labs
DUT: 789-E00006 & 789-E00008; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.04 mho/m; İr = 53; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B34 w/c Body, A25, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm,
dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 9.54 mW/g
B34 w/c Body, A25, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 48.5 V/m; Power Drift = 0.024 dB
Peak SAR (extrapolated) = 14.6 W/kg
SAR(1 g) = 10.5 mW/g; SAR(10 g) = 6.98 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 11.2 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 97 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B35
Date/Time: 28/12/2016 3:08:53 PM
Test Laboratory: Celltech Labs
DUT: 789-E00006 & 789-E00008; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835B
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 1.04 mho/m; İr = 53; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(7.94, 7.94, 7.94); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B35 w/c Body, A3, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm,
dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 10.0 mW/g
B35 w/c Body, A3, XL-185, 896MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 49.6 V/m; Power Drift = -0.170 dB
Peak SAR (extrapolated) = 16.0 W/kg
SAR(1 g) = 10.4 mW/g; SAR(10 g) = 6.56 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 11.2 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 98 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H1
Date/Time: 29/12/2016 12:33:44 PMDate/Time: 29/12/2016 12:40:38 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 768 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 768 MHz; ı = 0.87 mho/m; İr = 43; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H1 XL-185, 768MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 1.44 mW/g
H1 XL-185, 768MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 18.7 V/m; Power Drift = 0.087 dB
Peak SAR (extrapolated) = 1.77 W/kg
SAR(1 g) = 1.39 mW/g; SAR(10 g) = 1.05 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 1.46 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 99 of 164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H2
Date/Time: 29/12/2016 12:53:34 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 776 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 776 MHz; ı = 0.87 mho/m; İr = 43; ȡ = 1000 kg/m3
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H2 XL-185, 776 MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 1.44 mW/g
H2 XL-185, 776 MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 21.7 V/m; Power Drift = 0.011 dB
Peak SAR (extrapolated) = 1.75 W/kg
SAR(1 g) = 1.38 mW/g; SAR(10 g) = 1.04 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 100 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H3
Date/Time: 29/12/2016 1:13:29 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 798 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 798 MHz; ı = 0.89 mho/m; İr = 42.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H3 XL-185, 798 MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.57 mW/g
H3 XL-185, 798 MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 30.8 V/m; Power Drift = -0.124 dB
Peak SAR (extrapolated) = 3.36 W/kg
SAR(1 g) = 2.55 mW/g; SAR(10 g) = 1.87 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.68 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 101 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H4
Date/Time: 30/12/2016 11:16:24 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 806 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 806 MHz; ı = 0.891 mho/m; İr = 42.6; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H4 XL-185,806MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.09 mW/g
H4 XL-185,806MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 24.4 V/m; Power Drift = 0.043 dB
Peak SAR (extrapolated) = 2.62 W/kg
SAR(1 g) = 2 mW/g; SAR(10 g) = 1.48 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.10 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 102 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H5
Date/Time: 30/12/2016 11:59:53 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 816 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 816 MHz; ı = 0.901 mho/m; İr = 42.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H5 XL-185, 816 MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.22 mW/g
H5 XL-185, 816 MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 27.8 V/m; Power Drift = -0.146 dB
Peak SAR (extrapolated) = 2.78 W/kg
SAR(1 g) = 2.11 mW/g; SAR(10 g) = 1.55 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 103 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H6
Date/Time: 29/12/2016 2:25:43 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 851 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 851 MHz; ı = 0.95 mho/m; İr = 41.9; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H6 XL-185, 851MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.47 mW/g
H6 XL-185, 851MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 30.2 V/m; Power Drift = -0.217 dB
Peak SAR (extrapolated) = 3.16 W/kg
SAR(1 g) = 2.37 mW/g; SAR(10 g) = 1.72 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.49 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 104 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H7
Date/Time: 29/12/2016 2:48:07 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 861 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 861 MHz; ı = 0.95 mho/m; İr = 41.8; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H7 XL-185, 861MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.85 mW/g
H7 XL-185, 861MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 28.5 V/m; Power Drift = -0.196 dB
Peak SAR (extrapolated) = 3.61 W/kg
SAR(1 g) = 2.69 mW/g; SAR(10 g) = 1.96 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.84 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 105 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H8
Date/Time: 29/12/2016 3:07:39 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 0.991 mho/m; İr = 41.4; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H8 XL-185, 896MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 3.26 mW/g
H8 XL-185, 896MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 22.6 V/m; Power Drift = -0.198 dB
Peak SAR (extrapolated) = 4.26 W/kg
SAR(1 g) = 3.14 mW/g; SAR(10 g) = 2.26 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 3.32 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 106 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 107 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H9
Date/Time: 29/12/2016 3:27:26 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 901 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 901 MHz; ı = 0.996 mho/m; İr = 41.2; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H9 XL-185,901MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.85 mW/g
H9 XL-185,901MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 20.8 V/m; Power Drift = -0.164 dB
Peak SAR (extrapolated) = 3.72 W/kg
SAR(1 g) = 2.74 mW/g; SAR(10 g) = 1.96 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.89 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 108 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H10
Date/Time: 30/12/2016 10:55:28 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 935 MHz;Duty Cycle: 1:1
Medium parameters used: f = 935 MHz; ı = 1.04 mho/m; İr = 40.7; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H10 XL-185,935MHz, ant 4450-01, bat 4010-01, Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.41 mW/g
H10 XL-185,935MHz, ant 4450-01, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 15.6 V/m; Power Drift = -0.136 dB
Peak SAR (extrapolated) = 3.11 W/kg
SAR(1 g) = 2.27 mW/g; SAR(10 g) = 1.61 mW/g
Maximum value of SAR (measured) = 2.40 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 109 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H12
Date/Time: 30/12/2016 12:50:57 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 0.991 mho/m; İr = 41.4; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H12 w/c XL-185, 896 MHz, ant 4450-01, bat 4010-04,Lotus/Area Scan (8x23x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.54 mW/g
H12 w/c XL-185, 896 MHz, ant 4450-01, bat 4010-04,Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 22.5 V/m; Power Drift = -0.179 dB
Peak SAR (extrapolated) = 3.27 W/kg
SAR(1 g) = 2.42 mW/g; SAR(10 g) = 1.74 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.56 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 110 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H13
Date/Time: 30/12/2016 1:54:58 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 768 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 768 MHz; ı = 0.87 mho/m; İr = 43; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H13 XL-185, 768 MHz, ant 4450-02, bat 4010-01, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.63 mW/g
H13 XL-185, 768 MHz, ant 4450-02, bat 4010-01, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 30.6 V/m; Power Drift = -0.047 dB
Peak SAR (extrapolated) = 3.20 W/kg
SAR(1 g) = 2.51 mW/g; SAR(10 g) = 1.89 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 111 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H14
Date/Time: 30/12/2016 2:13:55 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 776 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 776 MHz; ı = 0.87 mho/m; İr = 43; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H14 XL-185,776 MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.45 mW/g
H14 XL-185,776 MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 29.4 V/m; Power Drift = -0.121 dB
Peak SAR (extrapolated) = 2.97 W/kg
SAR(1 g) = 2.33 mW/g; SAR(10 g) = 1.76 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.44 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 112 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H15
Date/Time: 30/12/2016 2:31:15 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 798 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 798 MHz; ı = 0.89 mho/m; İr = 42.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H15 XL-185,798 MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.85 mW/g
H15 XL-185,798 MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 32.2 V/m; Power Drift = -0.158 dB
Peak SAR (extrapolated) = 3.51 W/kg
SAR(1 g) = 2.71 mW/g; SAR(10 g) = 2.03 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.86 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 113 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H16
Date/Time: 30/12/2016 2:49:14 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 806 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 806 MHz; ı = 0.891 mho/m; İr = 42.6; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H16 XL-185,806 MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.57 mW/g
H16 XL-185,806 MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 38.2 V/m; Power Drift = 0.062 dB
Peak SAR (extrapolated) = 3.19 W/kg
SAR(1 g) = 2.47 mW/g; SAR(10 g) = 1.85 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.60 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 114 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H17
Date/Time: 30/12/2016 3:09:46 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 816 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 816 MHz; ı = 0.901 mho/m; İr = 42.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H17 XL-185,816 MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.47 mW/g
H17 XL-185,816 MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 38.9 V/m; Power Drift = -0.034 dB
Peak SAR (extrapolated) = 3.03 W/kg
SAR(1 g) = 2.34 mW/g; SAR(10 g) = 1.74 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.46 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 115 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H18
Date/Time: 30/12/2016 3:28:37 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 851 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 851 MHz; ı = 0.95 mho/m; İr = 41.9; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H18 XL-185,851 MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.22 mW/g
H18 XL-185,851 MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 43.8 V/m; Power Drift = -0.083 dB
Peak SAR (extrapolated) = 2.79 W/kg
SAR(1 g) = 2.13 mW/g; SAR(10 g) = 1.59 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.24 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 116 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H19
Date/Time: 03/01/2017 11:29:38 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 861 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 861 MHz; ı = 0.932 mho/m; İr = 41; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H19 XL-185,861MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.47 mW/g
H19 XL-185,861MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 37.2 V/m; Power Drift = -0.134 dB
Peak SAR (extrapolated) = 3.15 W/kg
SAR(1 g) = 2.38 mW/g; SAR(10 g) = 1.76 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.51 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 117 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H20
Date/Time: 03/01/2017 12:29:59 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 0.942 mho/m; İr = 40.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H20 XL-185,896 MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 3.52 mW/g
H20 XL-185,896 MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 34.7 V/m; Power Drift = -0.00 dB
Peak SAR (extrapolated) = 4.55 W/kg
SAR(1 g) = 3.4 mW/g; SAR(10 g) = 2.47 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 3.58 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 118 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 119 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H21
Date/Time: 03/01/2017 12:12:12 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 901 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 901 MHz; ı = 0.952 mho/m; İr = 40.4; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H21 XL-185,901 MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.92 mW/g
H21 XL-185,901 MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 32.4 V/m; Power Drift = -0.044 dB
Peak SAR (extrapolated) = 3.82 W/kg
SAR(1 g) = 2.86 mW/g; SAR(10 g) = 2.08 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 3.02 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 120 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H22
Date/Time: 03/01/2017 12:49:20 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 935 MHz;Duty Cycle: 1:1
Medium parameters used: f = 935 MHz; ı = 1 mho/m; İr = 40; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H22 XL-185,935 MHz, ant 4450-02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 3.07 mW/g
H22 XL-185,935 MHz, ant 4450-02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 36.6 V/m; Power Drift = -0.119 dB
Peak SAR (extrapolated) = 4.03 W/kg
SAR(1 g) = 2.99 mW/g; SAR(10 g) = 2.15 mW/g
Maximum value of SAR (measured) = 3.16 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 121 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H24
Date/Time: 03/01/2017 1:32:31PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 0.942 mho/m; İr = 40.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H24 XL-185,896 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.91 mW/g
H24 XL-185,896 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 36.6 V/m; Power Drift = 0.053 dB
Peak SAR (extrapolated) = 3.76 W/kg
SAR(1 g) = 2.82 mW/g; SAR(10 g) = 2.06 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.98 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 122 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H25
Date/Time: 03/01/2017 2:28:26 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 896 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 896 MHz; ı = 0.942 mho/m; İr = 40.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H25 XL-185,896 MHz, ant 11223/02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.42 mW/g
H25 XL-185,896 MHz, ant 11223/02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 29.4 V/m; Power Drift = 0.139 dB
Peak SAR (extrapolated) = 3.07 W/kg
SAR(1 g) = 2.31 mW/g; SAR(10 g) = 1.68 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.43 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 123 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H26
Date/Time: 03/01/2017 2:46:46 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 901 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 901 MHz; ı = 0.952 mho/m; İr = 40.4; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H26 XL-185,901 MHz, ant 11223/02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.12 mW/g
H26 XL-185,901 MHz, ant 11223/02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 30.9 V/m; Power Drift = 0.023 dB
Peak SAR (extrapolated) = 2.71 W/kg
SAR(1 g) = 2.03 mW/g; SAR(10 g) = 1.48 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 2.14 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 124 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H27
Date/Time: 03/01/2017 3:32:09 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 935 MHz;Duty Cycle: 1:1
Medium parameters used: f = 935 MHz; ı = 1 mho/m; İr = 40; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: SAM with CRP; Type: SAM;
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H27 XL-185,935 MHz, ant 11223/02, bat HR003, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.58 mW/g
H27 XL-185,935 MHz, ant 11223/02, bat HR003, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 38.9 V/m; Power Drift = -0.165 dB
Peak SAR (extrapolated) = 3.12 W/kg
SAR(1 g) = 2.31 mW/g; SAR(10 g) = 1.67 mW/g
Maximum value of SAR (measured) = 2.44 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 125 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 126 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H29
Date/Time: 04/01/2017 10:48:59 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 835H
Communication System: Harris; Frequency: 935 MHz;Duty Cycle: 1:1
Medium parameters used: f = 935 MHz; ı = 1 mho/m; İr = 40; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(8.12, 8.12, 8.12); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: SAM with CRP; Type: SAM;
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H29 XL-185,w/c 935 MHz, ant 11223/02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.22 mW/g
H29 XL-185,w/c 935 MHz, ant 11223/02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 34.9 V/m; Power Drift = -0.217 dB
Peak SAR (extrapolated) = 2.73 W/kg
SAR(1 g) = 2.02 mW/g; SAR(10 g) = 1.45 mW/g
Maximum value of SAR (measured) = 2.13 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 127 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B36
Date/Time: 05/01/2017 11:24:07 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2412 MHz;Duty Cycle: 1:1.11
Medium parameters used (interpolated): f = 2412 MHz; ı = 1.95 mho/m; İr = 49.6; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B36 XL-185,2412 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.013 mW/g
B36 XL-185,2412 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 0.992 V/m; Power Drift = -0.569 dB
Peak SAR (extrapolated) = 0.019 W/kg
SAR(1 g) = 0.00269 mW/g; SAR(10 g) = 0.000379 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.019 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 128 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B37
Date/Time: 05/01/2017 11:42:58 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2437 MHz;Duty Cycle: 1:1.11
Medium parameters used (interpolated): f = 2437 MHz; ı = 1.99 mho/m; İr = 49.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B37 XL-185,2437 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.010 mW/g
B37 XL-185,2437 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 1.43 V/m; Power Drift = -4.19 dB
Peak SAR (extrapolated) = 0.020 W/kg
SAR(1 g) = 0.00322 mW/g; SAR(10 g) = 0.00107 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.016 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 129 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B38
Date/Time: 05/01/2017 12:01:55 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2462 MHz;Duty Cycle: 1:1.11
Medium parameters used (interpolated): f = 2462 MHz; ı = 2.03 mho/m; İr = 49.7; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B38 XL-185,2462 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.019 mW/g
B38 XL-185,2462 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 1.47 V/m; Power Drift = 3.25 dB
Peak SAR (extrapolated) = 0.016 W/kg
SAR(1 g) = 0.0028 mW/g; SAR(10 g) = 0.000535 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.016 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 130 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B39
Date/Time: 05/01/2017 12:19:04 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2437 MHz;Duty Cycle: 1:1.11
Medium parameters used (interpolated): f = 2437 MHz; ı = 1.99 mho/m; İr = 49.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B39 XL-185,w/c 2437 MHz, ant 4450-02, bat 4010-04,LUE/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.01 mW/g
B39 XL-185,w/c 2437 MHz, ant 4450-02, bat 4010-04,LUE/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 1.27 V/m; Power Drift = 0.597 dB
Peak SAR (extrapolated) = 0.020 W/kg
SAR(1 g) = 0.00415 mW/g; SAR(10 g) = 0.000936 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.020 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 131 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B41
Date/Time: 05/01/2017 1:31:06 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2480 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2480 MHz; ı = 2.07 mho/m; İr = 49.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B41 XL-185,2480 MHz, ant 4450-02, bat 4010-04,Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.013 mW/g
B41 XL-185,2480 MHz, ant 4450-02, bat 4010-04,Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 0.625 V/m; Power Drift = 7.41 dB
Peak SAR (extrapolated) = 0.012 W/kg
SAR(1 g) = 0.00106 mW/g; SAR(10 g) = 0.00016 mW/g
Maximum value of SAR (measured) = 0.017 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 132 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H30
Date/Time: 09/01/2017 2:50:30 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2412 MHz;Duty Cycle: 1:1.11
Medium parameters used (interpolated): f = 2412 MHz; ı = 1.87 mho/m; İr = 39.7; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.37, 6.37, 6.37); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H30 XL-185,2412 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.01 mW/g
H30 XL-185,2412 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 0.646 V/m; Power Drift = 9.01 dB
Peak SAR (extrapolated) = 0.012 W/kg
SAR(1 g) = 0.00383 mW/g; SAR(10 g) = 0.0019 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.011 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 133 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H31
Date/Time: 09/01/2017 3:19:10 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2437 MHz;Duty Cycle: 1:1.11
Medium parameters used (interpolated): f = 2437 MHz; ı = 1.91 mho/m; İr = 39.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.37, 6.37, 6.37); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H31 XL-185,2437 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.01 mW/g
H31 XL-185,2437 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 0.285 V/m; Power Drift = 16.8 dB
Peak SAR (extrapolated) = 0.016 W/kg
SAR(1 g) = 0.00292 mW/g; SAR(10 g) = 0.000985 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.012 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 134 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H32
Date/Time: 09/01/2017 3:34:48 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2462 MHz;Duty Cycle: 1:1.11
Medium parameters used (interpolated): f = 2462 MHz; ı = 1.94 mho/m; İr = 39.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.37, 6.37, 6.37); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H32 XL-185,2462 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.010 mW/g
H32 XL-185,2462 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm,
dz=5mm
Reference Value = 0.721 V/m; Power Drift = 8.69 dB
Peak SAR (extrapolated) = 0.012 W/kg
SAR(1 g) = 0.000908 mW/g; SAR(10 g) = 0.000304 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.012 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 135 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H34
Date/Time: 10/01/2017 9:58:19 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 2450B
Communication System: WiFi; Frequency: 2480 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2480 MHz; ı = 1.97 mho/m; İr = 39.6; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.37, 6.37, 6.37); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H34 BT, XL-185,2480 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.01 mW/g
H34 BT, XL-185,2480 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm,
dy=7.5mm, dz=5mm
Reference Value = 0.523 V/m; Power Drift = 4.33 dB
Peak SAR (extrapolated) = 0.016 W/kg
SAR(1 g) = 0.00458 mW/g; SAR(10 g) = 0.00211 mW/g
Maximum value of SAR (measured) = 0.011 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 136 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B44
Date/Time: 13/01/2017 11:24:07 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: WiFi; Frequency: 5180 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 5180 MHz; ı = 5.62mho/m; İr = 48.5; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B44 XL-185,5180 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.013 mW/g
B44 XL-185,5180 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 0.992 V/m; Power Drift = -0.569 dB
Peak SAR (extrapolated) = 0.019 W/kg
SAR(1 g) = 0.00269 mW/g; SAR(10 g) = 0.000379 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.019 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 137 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B45
Date/Time: 13/01/2017 11:42:58 AM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: WiFi; Frequency: 5240 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 5240 MHz; ı = 5.67 mho/m; İr = 48.42; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B45 XL-185,5240 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.010 mW/g
B45 XL-185,5240 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 1.43 V/m; Power Drift = -4.19 dB
Peak SAR (extrapolated) = 0.020 W/kg
SAR(1 g) = 0.00322 mW/g; SAR(10 g) = 0.00107 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.016 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 138 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B46
Date/Time: 13/01/2017 12:01:55 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: WiFi; Frequency: 5260 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 5260 MHz; ı = 5.76 mho/m; İr = 48.09; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B46 XL-185,5260 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.019 mW/g
B46 XL-185,5260 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 1.47 V/m; Power Drift = 3.25 dB
Peak SAR (extrapolated) = 0.016 W/kg
SAR(1 g) = 0.0028 mW/g; SAR(10 g) = 0.000535 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.016 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 139 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B47
Date/Time: 13/01/2017 12:19:04 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: WiFi; Frequency: 5300 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 5300 MHz; ı = 5.83 mho/m; İr = 48.69; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B47 XL-185,w/c 5300 MHz, ant 4450-02, bat 4010-04,LUE/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.01 mW/g
B47 XL-185,w/c 5300 MHz, ant 4450-02, bat 4010-04,LUE/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 1.27 V/m; Power Drift = 0.597 dB
Peak SAR (extrapolated) = 0.020 W/kg
SAR(1 g) = 0.00415 mW/g; SAR(10 g) = 0.000936 mW/g
Info: Interpolated medium parameters used for SAR evaluation!
Maximum value of SAR (measured) = 0.020 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 140 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot B49
Date/Time: 13/01/2017 3:31:06 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: WiFi; Frequency: 5300 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 5300 MHz; ı = 5.83 mho/m; İr = 48.69; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(6.55, 6.55, 6.55); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
B49 XL-185,5300 MHz, ant 4450-02, bat 4010-01,Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.013 mW/g
B49 XL-185,5300 MHz, ant 4450-02, bat 4010-01,Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 0.625 V/m; Power Drift = 7.41 dB
Peak SAR (extrapolated) = 0.012 W/kg
SAR(1 g) = 0.00106 mW/g; SAR(10 g) = 0.00016 mW/g
Maximum value of SAR (measured) = 0.017 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 141 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H36
Date/Time: 16/01/2017 2:11:38 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: 5250 MHz; Frequency: 5180 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5180 MHz; ı = 4.92 mho/m; İr = 36.1; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(4.41, 4.41, 4.41); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H36 XL-185,5180 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.035 mW/g
H36 XL-185,5180 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 0.518 V/m; Power Drift = 10.1 dB
Peak SAR (extrapolated) = 0.057 W/kg
SAR(1 g) = 0.018 mW/g; SAR(10 g) = 0.00896 mW/g
Maximum value of SAR (measured) = 0.050 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 142 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H37
Date/Time: 16/01/2017 2:34:11 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: 5250 MHz; Frequency: 5240 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5240 MHz; ı = 4.96 mho/m; İr = 36.2; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(4.41, 4.41, 4.41); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H37 XL-185,5240 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.038 mW/g
H37 XL-185,5240 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 1.83 V/m; Power Drift = -5.33 dB
Peak SAR (extrapolated) = 0.045 W/kg
SAR(1 g) = 0.00676 mW/g; SAR(10 g) = 0.00136 mW/g
Maximum value of SAR (measured) = 0.045 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 143 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H38
Date/Time: 16/01/2017 2:48:55 PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: 5250 MHz; Frequency: 5260 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5260 MHz; ı = 5 mho/m; İr = 36; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(4.41, 4.41, 4.41); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H38 XL-185,5260 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.052 mW/g
H38 XL-185,5260 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 0.346 V/m; Power Drift = 4.82 dB
Peak SAR (extrapolated) = 0.095 W/kg
SAR(1 g) = 0.014 mW/g; SAR(10 g) = 0.00675 mW/g
Maximum value of SAR (measured) = 0.053 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 144 of
164
Test Report S/N:
Test Report Issue Date:
45461375R2.0
23 March 2017
Plot H39
Date/Time: 16/01/2017 3:19:31PM
Test Laboratory: Celltech Labs
DUT: Harris XL-185; Type: PTT Radio Transceiver; Serial: 789-E00006 & 789-E00008
Program Name: 5250B
Communication System: 5250 MHz; Frequency: 5300 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5300 MHz; ı = 5.01 mho/m; İr = 35.9; ȡ = 1000 kg/m
Phantom section: Flat Section
DASY4 Configuration:
- Probe: EX3DV4 - SN3600 2016; ConvF(4.41, 4.41, 4.41); Calibrated: 27/04/2016
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 4mm (Mechanical
Surface Detection)
- Electronics: DAE4 Sn353 2016; Calibrated: 20/04/2016
- Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:xxxx
- Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
H39 XL-185,5300 MHz, ant 4450-02, bat 4010-04, Lotus/Area Scan (8x19x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.046 mW/g
H39 XL-185,5300 MHz, ant 4450-02, bat 4010-04, Lotus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 0.745 V/m; Power Drift = 9.53 dB
Peak SAR (extrapolated) = 0.069 W/kg
SAR(1 g) = 0.017 mW/g; SAR(10 g) = 0.00768 mW/g
©2017 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc.
Page 145 of
164
Download: TR-0143-E XL-185P, 7/8/900 MHz, PORTABLE LAND MOBILE RADIO RF Exposure Info RF Exposure SAR with LTE 2 HARRIS CORPORATION
Mirror Download [FCC.gov]TR-0143-E XL-185P, 7/8/900 MHz, PORTABLE LAND MOBILE RADIO RF Exposure Info RF Exposure SAR with LTE 2 HARRIS CORPORATION
Document ID3335922
Application ID6cBrYnsoDtLI8hnlsumzMQ==
Document DescriptionRF Exposure SAR with LTE 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize99.71kB (1246398 bits)
Date Submitted2017-03-28 00:00:00
Date Available2017-03-28 00:00:00
Creation Date2017-12-27 18:05:36
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-27 18:05:36
Document TitleRF Exposure SAR with LTE 2
Document CreatorPScript5.dll Version 5.2.2
Document Author: JasmeetG

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f639102d-9e01-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:11 03:02:45Z
Create Date                     : 2017:07:11 03:02:45Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:f639102d-9e01-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2018