72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc

Sony Mobile Communications Inc GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC

Page 1 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 2 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 3 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 4 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 5 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 6 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 7 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 8 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 9 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 10 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 11 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 12 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 13 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 14 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 15 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 16 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 17 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 18 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 19 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 20 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 21 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 22 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 23 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 24 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 25 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 26 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 27 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 28 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 29 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 30 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 31 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 32 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 33 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 34 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 35 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 36 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 37 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 38 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 39 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 40 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 41 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 42 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 43 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 44 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 45 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 46 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 47 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 48 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 49 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 50 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 51 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 52 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 53 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 54 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 55 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 56 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 57 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 58 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 59 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 60 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 61 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 62 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 63 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 64 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 65 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 66 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 67 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 68 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 69 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 70 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 71 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 72 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 73 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Page 74 of 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc

CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 10019 1, China
Tel: +86-1 0-62304633-2079
Fax: +86-1 0-62304633 -2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Client
Certificate No:
Sporton
21 8-97041
CALIBRATION CERTIFICATE
Object
D835V2 - SN : 4d167
Calibration Procedure(s)
FF-Z11-003-01
Calibration Procedures for dipole validation kits
Calibration date:
February 27, 2018
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22±3)'C and
humidity<70%.
Calibration Equipment used (M&TE critical for calibration)
ID#
Cal Date(Calibrated by, Certificate No.)
Power Meter NRVD
102196
02-Mar-17 (CTTL, No.J 17X01 254)
Mar-18
Power sensor NRV-Z5
100596
02-Mar-17 (CTTL, No.J17X01254)
Mar-18
Reference Probe EX3DV4
SN 36 17
01-Feb-18(CTTL-SPEAG,No.Z18-97015)
Jan-19
DAE4
SN 1525
02-0ct-17(SPEAG,No.DAE4-1525_0ct1 7)
Oct-18
Secondary Standards
ID #
Cal Date(Calibrated by, Certificate No.)
Signal Generator E4438C
MY49071430
23-Jan-18 (CTTL, No.J18X00560)
Jan-19
NetworkAnalyzer E5071C
MY46110673
24-Jan-18 (CTTL, No.J18X00561 )
Jan-19
Primary Standards
Name
Function
Scheduled Calibration
Scheduled Calibration
~ ignature
Calibrated by:
Zhao Jing
SAR Test Engineer
.,"· _-.,-t t; ·-
Reviewed by:
Lin Hao
SAR Test Engineer
- ~ --
Approved by:
Qi Dianyuan
SAR Project Leader
~~ --- -.
Issued: March 2, 2018
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: Z 18-9704 1
Page 1 of8
In Collaboration with
• TTL s
a 9
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORMx,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak
Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniq ues", June 2013
b) IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human
exposure to radio frequency fields from hand-held and body-mounted wireless
communication devices- Part 1: Device used next to the ear (Frequency range of 300MHz to
6GHz)", July 2016
c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless
communication devices used in close proximity to the human body (frequency range of
30MHz to 6GHz)", March 2010
d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 Wat the antenna
connector.
• SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of
Measurement multiplied by the coverage factor k=2 , which for a normal distribution
Corresponds to a coverage probability of approximately 95%.
Certificate No: Zl8-97041
Page 2 of8
with
................
p e a g
'!!!!!.TTL sCALIBRATION
LABORATORY
In Colfaboration
Add: No.SI Xueyuan Road, Haidian District, Beijing, 10019 1, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Measurement Conditions
DASY system con fi1Qura t'10n, as far as not Q1ven on paQe
DASY Version
DASY52
Extrapolation
Advanced Extrapolation
Phantom
Triple Flat Phantom 5 .1C
Distance Dipole Center - TSL
52.10.0.1446
15 mm
with Spacer
Zoom Scan Resolution
dx, dy, dz = 5 mm
Frequency
835 MHz ± 1 MHz
Head TSL parameters
The followina parameters and calculations were applied.
Temperature
Nominal Head TSL parameters
22.0 °C
Measured Head TSL parameters
<1 .0 °C
......_
0.92 mho/m ± 6 %
----
Condition
g) of Head TSL
2 .36 mW lg
250 mW input power
SAR for nominal Head TSL parameters
cm 3
Conductivity
0 .90 mho/m
41.7±6%
SAR measured
SAR averaged over 10
41.5
(22.0 ± 0.2) °C
Head TSL temperature change during test
SAR result with Head TSL
SAR averaged over 1 cm (1
Permittivity
9.26 mW /g ± 18.8 % (k=2)
normalized to 1W
(1 o g) of Head TSL
Condition
SAR measured
1.53 mW I g
250 mW input power
SAR for nominal Head TSL parameters
6.03 mW /g ± 18.7 % (k=2)
normalized to 1W
Body TSL parameters
Th e fo II owma
. oarameters an d ca Icu Ia t'ions were aoo r1ed .
Temperature
Nominal Body TSL parameters
22.0 °C
Measured Body TSL parameters
<1.0 °C
----
SAR for nominal Body TSL parameters
cm
normalized to 1W
250 mW input power
SAR for nominal Body TSL parameters
Certificate No: Z 18-97041
----
2.47 mW I g
9.62 mW /g
± 18.8 % (k=2)
Condition
(10 g) of Body TSL
SAR measured
1.00 mho/m ± 6 %
Condition
g) of Body TSL
250 mW input power
Conductivity
0.97 mho/m
53.6 ±6 %
SAR measured
SAR averaged over 10
55.2
(22.0 ± 0.2) °C
Body TSL temperature change during test
SAR resu It W "Ith B 01y
d TSL
SAR averaged over 1 cm (1
Permittivity
normalized to 1W
Page 3 of8
1.60 mW I g
6.27 mW /g
± 18.7 % (k=2)
In Collaboration with
s p e a g
• TTL CALIBRATION
LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 1001 91, China
Fax: +86-1 0-62304633-2504
Tel: +86- 10-62304633-2079
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Appendix (Additional assessments outside the scope of CNAS L0570)
Antenna Parameters with Head TSL
Impedance, transformed to feed point
52.10- 0.87j0
Return Loss
- 33.2dB
Antenna Parameters with Body TSL
Impedance, transformed to feed point
47.50- 3.60j0
Return Loss
- 27.0dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.254 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can
be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly
connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some
of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded
according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not
affected by this change. The overall dipole length is still according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered
connections near the feedpoint may be damaged.
Additional EUT Data
/ Manufactured by
Certificate No: 2 18-9704 1
SPEAG
Page 4 of 8
In Collaboration with
p e
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel : +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
DASY5 Validation Report for Head TSL
Date: 02.27.2018
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN: 4dl67
Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1: I
Medium parameters used: f = 835 MHz; cr = 0.924 S/m; er= 41.68; p = 1000 kg/m 3
Phantom section: Right Section
Measurement Standard: DASYS (IEEE/IEC/ ANSI C63.19-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3617; ConvF(IO, 10, 10); Calibrated: 2/1/2018;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Snl525; Calibrated: 10/2/2017
Phantom: Triple Flat Phantom 5.lC; Type: QD 000 P51 CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(7417)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 57.66 V/m; Power Drift= 0.02 dB
Peak SAR (extrapolated)= 3.77 W/kg
SAR(l g) = 2.36 W /kg; SAR(lO g) = 1.53 W /kg
Maximum value of SAR (measured)= 3.26 W/kg
dB
-2.19
-4.37
-6.56
-8.74
-10 .93
L.
0 dB= 3.26 W/kg = 5.13 dBW/kg
Certificate No: Z 18-9704 1
Page 5 of8
In Collaboration with
s p
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plot for Head TSL
r-Trl Sll Log Mag 10. 00dB/ Ref O. OOOdB [F1]
5o . OO >l 835 . 00000 MHZ - 33 . 152 dB
4 0. 00
30 . 0 0
20. 00
10.00
0 . 000 ,., _
_ _ _ __
__
-10.00
- 20.00
- 30. 00
-40 . 00
- 50. 00
t~IIB sll sm1th
>1
(R+jx) scale 1.000u [F1 Del]
835.00000 MHZ
52.072
o -865.96 mo 220.u.--~- /
/'
:1 St.rt 635 ~
Certificate No: ZI 8-9704 I
-......_
..
Stop 1.035 GHz •
Page 6 of8
In Collaboration with
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100191 , China
Fax: +86-10-62304633-2504
Tel: +86-1 0-62304633-2079
E-mail: cttl@chinattl.com
http://www.chinattl.cn
DASYS Validation Report for Body TSL
Date: 02 .27.2018
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN: 4d167
Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1
Medium parameters used: f= 835 MHz; cr = 0.997 S/m; Br= 53.6; p = 1000 kg/m 3
Phantom section: Center Section
Measurement Standard: DASY5 (IEEE/ IEC/ANSI C63.19-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN36 I 7; ConvF(l 0.09, I 0.09, I 0.09); Calibrated: 2/ 1/20 I 8;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn I 525; Calibrated: I 0/2/2017
Phantom: Triple Flat Phantom 5. l C; Type: QD 000 PSI CA; Serial: I 161 / 1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(7417)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=Smm,
dy=Smm, dz=5mm
Reference Value= 56.65 V/m; Power Drift= -0.02 dB
Peak SAR (extrapolated)= 3.91 W/kg
SAR(l g) = 2.47 W/kg; SAR(lO g) = 1.6 W/kg
Maximum value of SAR (measured)= 3.38 W/kg
dB
-2.15
-4.30
-6-46
-8.61
-1 0.76
0 dB = 3.38 W /kg = 5.29 dBW/kg
Certificate No: Z I 8-97041
Page 7 of8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86- 10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plot for Body TSL
Trl 511 Log Mag 1 0.00dB/ Ref O.OOOdB [~1]
5o . OO
>1
835.00000 MHZ -26.952
40 . 00
30 . 00
20 . 00
10 . 00
- 4 0. 00
-5 0 . 00 ~ - - - -- - - -- - - - -511 smi th ( R+jx ) scale 1.ooou [~ oel]
- --
~ - --
--
~illl
>1
835 . 00000 MHZ
47.499 0 -3. 5986 0
52.~.-pr ' " ~ ,
,/
- -- - -- --'1--
11 Start 635 ~
- · --i
~J
------~~-~
Certificate No: Z 18-9704 1
- --
IFBW lOOHz
Page 8 of8
-----------
Stop 1.035 Glz
a T
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Swiss Calibration Service
Accredited by the Swiss Accreditation Service (SAS)
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Auden
Certificate No:
D1900V2-5d018_Jun18
CALIBRATION CERTIFICATE
Object
D1900V2 - SN:5d018
Calibration procedure(s)
QA CAL-05.v10
Calibration procedure for dipole validation kits above 700 MHz
Calibration date:
June 21, 2018
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date {Certificate No.)
Scheduled Calibration
Power meter NAP
SN: 104778
Apr-19
Power sensor NRP-291
SN: 103244
04-Apr-1 8 (No. 217-02672/02673)
04-Apr-18 (No. 217-02672)
Power sensor NRP-291
SN: 103245
04-Apr-18 (No. 217-02673)
Apr-19
Reference 20 dB Attenuator
SN: 5058 (20k)
04-Apr-18 (No. 217-02682)
Apr-19
Type-N mismatch combination
SN: 5047.2 / 06327
04-Apr-18 (No. 217-02683)
Apr-19
Reference Probe EX3DV4
30-Dec-17 (No. EX3-7349_Dec17)
Dec-18
DAE4
SN: 7349
SN: 601
26-0ct-1 7 (No. DAE4-601 _0ct17)
Oct-18
Secondary Standards
ID#
Check Date (in house)
Scheduled Check
Power meter EPM-442A
SN: GB37480704
07-0ct-1 5 (in house check Oct-16)
In house check: Oct-18
Apr-19
Power sensor HP 8481A
SN: US37292783
07-0ct-15 (in house check Oct-16)
In house check: Oct-1 8
Power sensor HP 8481A
SN: MY41092317
07-0ct-15 (in house check Oct-16)
In house check: Oct-18
RF generator R&S SMT-06
SN: 100972
15-Jun-15 (in house check Oct-16)
In house check: Oct-18
Network Analyzer HP 8753E
SN: US37390585
18-0ct-01 (in house check Oct-17)
In house check: Oct-18
Name
Function
Calibrated by:
Jeton Kastrati
Laboratory Technician
Approved by:
Katja Pokovic
Technical Manager
Issued: June 21 , 2018
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: 01900V2-5d018_Jun18
Page 1 of 8
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORM x,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak SpatialAveraged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1, "Measurement procedure for the assessment of Specific Absorption Rate
(SAR) from hand-held and body-mounted devices used next to the ear (frequency range of
300 MHz to 6 GHz)", July 2016
c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless
communication devices used in close proximity to the human body (frequency range of 30
MHz to 6 GHz)", March 2010
d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz"
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 Wat the antenna
connector.
• SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: D1900V2-5d018_Jun18
Page 2 of 8
Measurement Conditions
DASY svstern conf1guration, as far as not~ iven on paqe 1.
DASY Version
DASY5
Extrapolation
Advanced Extrapolation
Phantom
V52.10.1
Modular Flat Phantom
Distance Dipole Center - TSL
10mm
with Spacer
Zoom Scan Resolution
dx, dy, dz = 5 mm
Frequency
1900 MHz± 1 MHz
Head TSL parameters
Th e foII owmq
. parameters an d ca Icu Iat1ons
were app r1ed
Nominal Head TSL parameters
Measured Head TSL parameters
Temperature
Permittivity
Conductivity
22.0 °c
40.0
1.40 mho/m
(22.0 ± 0.2) c
40.6 ± 6 %
1.35 mho/m ± 6 %
< 0.5 °C
----
----
Head TSL temperature change during test
SAR result with Head TSL
SAR averaged over 1 cm 3 (1 g) of Head TSL
SAR measured
Condition
250 mW input power
9.77 W/kg
normalized to 1W
40.1 W/kg :t 17.0 % (k=2)
SAR for nominal Head TSL parameters
SAR averaged over 10 cm 3 (10 g) of Head TSL
SAR measured
condition
250 mW input power
5.22 W/kg
normalized to 1W
21.2 W/kg :t 16.5 % (k=2)
SAR for nominal Head TSL parameters
Body TSL parameters
The foII owing
. parameters and ca Icu Iat1ons
were app r1ed
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °c
53.3
1.52 mho/m
(22.0 ± 0.2) °C
54.9 ±6 %
1.46 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Body TSL
SAR averaged over 1 cm 3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 1O cm 3 (10 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: 01900V2-5d018_Jun1 8
Condition
250 mW input power
9.75 W/kg
normalized to 1 W
40.2 W/kg :t 17.0 % (k=2)
condition
250 mW input power
5.24 W/kg
normalized to 1W
21 .4 W/kg :t 16.5 % (k=2)
Page 3 of 8
Appendix (Additional assessments outside the scope of SCS 0108)
Antenna Parameters with Head TSL
Impedance, transformed to feed point
52.2 Q + 1.6 jQ
Return Loss
- 31.4 dB
Antenna Parameters with Body TSL
Impedance, transformed to feed point
47.1 Q + 3.0 jQ
Return Loss
- 27.3 dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.195 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms , because they might bend or the soldered connections near the
feedpoint may be damaged.
Additional EUT Data
Manufactured by
SPEAG
Manufactured on
June 04, 2002
Certificate No: D1900V2-5d018_Jun18
Page 4 of 8
DASY5 Validation Report for Head TSL
Date: 21.06.2018
Test Laboratory: SPEAG, Zurich, Switzerland
OUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:Sd018
Communication System: UID O - CW; Frequency: 1900 MHz
Medium parameters used: f = 1900 MHz; cr = 1.35 Sim; er = 40.6; p = 1000 kg/m 3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-20 1l)
DASY52 Configuration:
•
Probe: EX3DV4 - SN7349; ConvF(8.18, 8.18, 8.18)@ 1900 MHz; Calibrated: 30.12.2017
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn60 l ; Cal.ibrated: 26.10.2017
•
Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001
•
DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439)
Dipole Calibration for Head Tissue/Pin=250 mW, d=lOmm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value= 109.9 V/m; Power Drift= -0.04 dB
Peak SAR (extrapolated)= 17.6 W/kg
SAR(l g) = 9.77 W/kg; SAR(lO g) = 5.22 W/kg
Maximum value of SAR (measured)= 14.9 W/kg
dB
-3.00
-6.00
-9.00
-12.00
-15.00
0 dB= 14.9 W/kg = l l.73 dBW/kg
Certificate No: 01900V2-5d018_Jun18
Page 5 of 8
Impedance Measurement Plot for Head TSL
{gilJ S11
1 U FS
1: 52. 203 /l
1.6270
I}
.---~-\_ -
Del
2 1 J un 2 018 0 8:4 2 : 44
136.28 pH
1 900.01)0 000 MHz
-- "l'
-~
.J ;
_,,
'\
Avg
16
--
CH2 S 11
LOG
5 dB / REF - 20 dB
t---
'r--------
---+---_
Co
Hl d
I\
1 9 00 000 00 0 MHz
' 1~
1:-31 43 4 dB
)-
...__
Hld
.J
\I
,V
,___--
·~
'}
STOP 2 100. 000 000 MHz
START 1 700.000 000 MHz
Certificate No: D 1900V2-5d0 18_Jun 18
Page 6 of 8
DASY5 Validation Report for Body TSL
Date: 21.06.2018
Test Laboratory: SPEAG, Zurich, Switzerland
OUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:Sd018
Conununication System: UID O - CW; Frequency: 1900 MHz
Medium parameters used: f = 1900 MHz; cr = 1.46 Sim; Er = 54.9; p = 1000 kg/m 3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-201 l)
DASY52 Configuration:
•
Probe: EX3DV4- SN7349; ConvF(8.15, 8.15, 8.15)@ 1900 MHz; Calibrated: 30.12.2017
•
Sensor-Surface: l .4nun (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601 ; Calibrated: 26.10.2017
•
Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002
•
DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439)
Dipole Calibration for Body Tissue/Pin=250 mW, d=lOmm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value= 104.5 V/m; Power Drift= -0.06 dB
Peak SAR (extrapolated)= 16.9 W/kg
SAR(l g) =9.75 W/kg; SAR(IO g) =5.24 W/kg
Maximum value of SAR (measured) = 14.5 W/kg
dB
-3.00
-6.00
-9.00
-12.00
-15.00
0 dB= 14.5 W/kg = 11.61 dBW/kg
Certificate No: 01900V2-5d018_Jun18
Page 7 of 8
Impedance Measurement Plot for Body TSL
[rnII S 11
1 U FS
21 J un 201 8 08 : 4 4 :12
3. 023 4 :) 25 3 . 26 pH
1 900. 000 000 MHz
- --r---.
1: 4 7 , 0'32 l'l
\.-
Del
\\
Av 9
16
S11
LOG
----1.----'
5 d Bi REF -20 dB
- --- -------1
Av 9
f------
Hl d
START 1 700. 000 000 MH z
Certificate No: D1 900V2-5d01 8_Jun1 8
i/
"'-..Y
Page 8 of 8
!I
....v-""'---
,~ 1
1 9 00 000 00 0 MHz
16
1'-27 293 dB
L________
-~
\ .•
..._
/ - ., I
,I
,_
Hld
- L,., /'
CH2
S TOP 2 100. 000 0 0 0 MHz
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Auden
Certificate No:
02450V2-735_Dec17
!CALIBRATION CERTIFICATE
Object
D2450V2 - SN:735
Calibration procedure(s)
QA CAL-05.v9
Calibration procedure for dipole validation kits above 700 MHz
Calibration date:
December 15, 2017
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability ar-e given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID #
Cal Date (Certificate No.)
Scheduled Calibration
Power meter NAP
SN: 104778
04-Apr-17 (No. 217-02521/02522)
Apr-18
Apr-18
Power sensor NRP-Z91
SN: 103244
04-Apr-17 (No. 217-02521)
Power sensor NRP-Z91
SN: 103245
04-Apr-17 (No. 217-02522)
Reference 20 dB Attenuator
SN: 5058 (20k)
Apr-18
Apr-18
Type-N mismatch combination
SN: 5047.2 / 06327
07-Apr-17 (No. 217-02528)
07-Apr-17 (No. 217-02529)
Reference Probe EX3DV4
DAE4
SN: 7349
31-May-17 (No. EX3-7349_May17)
May-18
SN: 601
26-0ct-1 7 (No. DAE4-601 _0ct17)
Oct-18
Secondary Standards
ID#
Check Date (in house)
Scheduled Check
Power meter EPM-442A
SN: GB37480704
07-0ct-15 (in house check Oct-16)
In house check: Oct-18
Power sensor HP 8481A
SN: US37292783
07-0ct-15 (in house check Oct-16)
In house check: Oct-18
Power sensor HP 8481A
07-0ct-15 (in house check Oct-16)
In house check: Oct-18
RF generator R&S SMT-06
SN: MY41092317
SN: 100972
15-Jun-15 (in house check Oct- 16)
In house check: Oct-18
Network Analyzer HP 8753E
SN: US37390585
18-0ct-01 (in house check Oct-17)
In house check: Oct-18
Name
Function
Calibrated by:
Leif Klysner
Laboratory Technician
Approved by:
Katja Pokovic
Technical Manager
Apr-18
Signature
~~
/%~
Issued: December 18, 201 7
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: D2450V2-735_Dec17
Page 1 of 8
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Service suisse d'etalonnage
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORM x,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak SpatialAveraged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1, "Measurement procedure for the assessment of Specific Absorption Rate
(SAR) from hand-held and body-mounted devices used next to the ear (frequency range of
300 MHz to 6 GHz)", July 2016
c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless
communication devices used in close proximity to the human body (frequency range of 30
MHz to 6 GHz)", March 2010
d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz"
Additional Documentation:
e) DASY 4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
• SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, wh ich for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: D2450V2-735_Dec17
Page 2 of 8
Measurement Conditions
DASY system con fiQuration, as far as not~ iven on page 1.
DASY Version
DASY5
Extrapolation
Advanced Extrapolation
Phantom
V52.10.0
Modular Flat Phantom
Distance Dipole Center - TSL
10 mm
with Spacer
Zoom Scan Resolution
dx , dy, dz = 5 mm
Frequency
2450 MHz ± 1 MHz
Head TSL parameters
Th e foIIow1n_g
. parameters an d ca Icu Iarions were app r1ed
Nominal Head TSL parameters
Measured Head TSL parameters
Temperature
Permittivity
Conductivity
22.0 °c
39.2
1.80 mho/m
37.7 ±6 %
1.87 mho/m ± 6 %
----
----
(22 .0 ± 0.2)
Head TSL temperature change during test
< 0.5 °C
SAR result with Head TSL
SAR averaged over 1 cm3 (1 g) of Head TSL
SAR measured
Condition
250 mW input power
SAR for nominal Head TSL parameters
normalized to 1W
SAR averaged over 10 cm 3 (10 g) of Head TSL
SAR measured
13.2 W/kg
51.4 W/kg
:t
17.0 % (k=2)
condition
250 mW input power
6.07 W/kg
normalized to 1W
23.9 W/kg :t 16.5 % (k=2)
SAR for nominal Head TSL parameters
Body TSL parameters
Th e foII ow1n_g
. parameters and ca Icu Iaf ions were app r1e d
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
52.7
1.95 mho/m
51 .5±6 %
2.04 mho/m ± 6 %
----
----
(22.0 ± 0.2)
< 0.5 °C
SAR result with Body TSL
SAR averaged over 1 cm3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 10 cm3 (10 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D2450V2-735_Dec17
Condition
250 mW input power
13.0 W/kg
normalized to 1W
50.6 W/kg :t 17.0 % (k=2)
condition
250 mW input power
6.06 W/kg
normalized to 1W
23.9 W/kg :t 16.5 % (k=2)
Page 3 of 8
Appendix (Additional assessments outside the scope of SCS 0108)
Antenna Parameters with Head TSL
54.9 n + 4.9
Impedance, transformed to feed point
Return Loss
jn
• 23.6 dB
Antenna Parameters with Body TSL
49.7 n + 7.1 jn
Impedance, transformed to feed point
Return Loss
· 22.9 dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.154 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the
feedpoint may be damaged.
Additional EUT Data
Manufactured by
SPEAG
Manufactured on
May 07, 2003
Certificate No: D2450V2-735_Dec17
Page 4 of 8
DASY5 Validation Report for Head TSL
Date: 15.12.2017
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 735
Communication System: UID O - CW; Frequency: 2450 MHz
Medium parameters used: f = 2450 MHz; cr = 1.87 S/rn; er= 37.7; p = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-20I l)
DASY52 Configuration:
•
Probe: EX3DV4 - SN7349; ConvF(8.12, 8.12, 8.12); Calibrated: 31.05.2017;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601 ; Calibrated: 26.10.2017
•
Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001
•
DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Dipole Calibration for Head Tissue/Pin=250 mW, d=lOmm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value= 113.0 Vim; Power Drift= -0.08 dB
Peak SAR (extrapolated)= 27.3 W/kg
SAR(l g) = 13.2 W/kg; SAR(lO g) =6.07 W/kg
Maximum value of SAR (measured) = 21.4 W/kg
dB
-4.00
-8.00
-12.00
-16.00
-20.00
0 dB= 21.4 W/kg = 13.30 dBW/kg
Certificate No: D2450V2-735_Dec1 7
Page 5 of 8
Impedance Measurement Plot for Head TSL
15 Dec 2017
~ S11
1 U FS
1: 54. 877
o 320. 52
4. 9355
-------r---..._',
pH
13:45:33
2 450.000 000 MHz
.,.,/
", , ., -- '-\ - - i.r". ,,,
Del
'>
\ ,"" -, -- .)~
'1
\,
Av9
15
\\
'-
Ce
'-
...
S11
LOG
-------- --
5 dB i REF -20 dB
........_
""'~
"--
Av9
15
-- L -- -;'
\ _,
- - - - -.1-- --
"-
Hld
- .,,:' .._·' ,t
\ -
"'--.r
CH2
--· \... . .
_.,,/
1'- 23 500 d B
,v
~V-
2 450 000 000 MHz
-----
,.
Hld
START 2 250.000 000 MHz
Certificate No: D2450V2-735_Dec17
STOP 2 550, 000 000 MHz
Page 6 of 8
DASY5 Validation Report for Body TSL
Date: 15.12.2017
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 735
Communication System: UID O - CW; Frequency: 2450 MHz
Medium parameters used: f = 2450 MHz; cr = 2.04 Sim; Er = 51.5; p = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011)
DASY52 Configuration:
•
Probe: EX3DV4 - SN7349; ConvF(8.1, 8.1, 8.1); Calibrated: 31.05.2017;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 26.10.2017
•
Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002
•
DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Dipole Calibration for Body Tissue/Pin=250 mW, d=lOmm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mrn, dy=5mm, dz=5mm
Reference Value= 105.9 Vim; Power Drift= -0.09 dB
Peak SAR (extrapolated)= 26.0 W/kg
SAR(l g) = 13 W/kg; SAR(lO g) =6.06 W/kg
Maximum value of SAR (measured) = 20.4 W /kg
dB
-4.00
-8.00
-12.00
-16.00
-20.00
0 dB= 20.4 W/kg = 13.10 dBW/kg
Certificate No: D2450V2-735_Dec1 7
Page 7 of 8
Impedance Measurement Plot for Body TSL
15 Dec 2017
[fil] S11
1 U FS
1: 4'3. 717
,,--
,(
7. 1 328
o 463. 36
_,
_, ---r------..............
\_
I'
Del
('
-, .
.._
pH
"\
--' \
,\
'·
.,.
-· ,,, ,;;:;/ -
.-
13:4'3:06
2 450.000 000 MHz
--
.,
L , , '/
..__
- ' ', --! - -- }./ '
Ce
-------- .1.----
Hld
CH2
v,
S11
LOG
----
5 dB i REF -20 dB
1: -22 '325 dB
r-----...._
"r---..._
_,,,..----
iv
'~
Hld
START 2 250.000 000 MHz
Certificate No: D2450V2-735_Dec17
--
Av g
16
2 450 000 000 MHz
STOP 2 650.000 000 MHz
Page 8 of 8
. . . .,..._"
- TTL
In Collaboration with
P e
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 1001 91, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
http://www.chinattl.cn
E-mail: cttl@chinattl.com
Certificate No:
Sporton
Client
218-97046
CALIBRATION CERTIFICATE
Object
D2450V2 - SN: 929
Calibration Procedure(s)
FF-211-003-01
Calibration Procedures for dipole validation kits
Calibration date:
March 1, 2018
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22±3)"C and
humidity<70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Scheduled Calibration
102196
02-Mar-17 (CTTL, No.J17X01254)
Mar-18
100596
02-Mar-17 (CTTL, No.J17X01254)
Mar-18
Reference Probe EX3DV4
SN 3846
25-Jan-18(SPEAG,No.EX3-3846_Jan18)
Jan-19
DAE4
SN 1525
02-0ct-17(SPEAG,No.DAE4-1525_0ct17)
Oct-18
Secondary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Signal Generator E4438C
MY49071430
23-Jan-18 (CTTL, No.J18X00560)
Jan-19
Network Analyzer E5071 C
MY46110673
24-Jan-18 (CTTL, No.J18X00561)
Jan-19
Power Meter NRVD
Power sensor
NRV-Z5
Name
Function
Calibrated by:
Zhao Jing
SAR Test Engineer
Reviewed by:
Lin Hao
SAR Test Engineer
Qi Dianyuan
SAR Project Leader
Approved by:
Scheduled Calibration
Signature
{{;\-
~-
Issued: March 3, 2018
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: 218-97046
Page I of8
--
In Collaboration with
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, I-:laidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86- 10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORMx,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak
Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1 , "Measurement procedure for assessment of specific absorption rate of human
exposure to radio frequency fields from hand-held and body-mounted wireless
communication devices- Part 1: Device used next to the ear (Frequency range of 300MHz to
6GHz)", July 2016
c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless
communication devices used in close proximity to the human body (frequency range of
30MHz to 6GHz)", March 2010
d) KDB865664 , SAR Measurement Requ irements for 100 MHz to 6 GHz
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty requ ired.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required .
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 Wat the antenna
connector.
• SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of
Measurement multiplied by the coverage factor k=2, which for a normal distribution
Corresponds to a coverage probability of approximately 95%.
Certificate No: Z 18-97046
Page 2 of 8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.51 Xuey uan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Measurement Conditions
DASY system configuration, as far as not given on page 1.
DASY Version
DASY52
Extrapolation
Advanced Extrapolation
Phantom
Triple Flat Phantom 5.1C
Distance Dipole Center - TSL
52.10.0.1446
10 mm
with Spacer
Zoom Scan Resolution
dx, dy, dz= 5 mm
Frequency
2450 MHz ± 1 MHz
Head TSL parameters
Thfll
. paramet ers an d ca Icu Iafions were aoor1ed .
e o ow1nQ
Temperature
Nominal Head TSL parameters
22.0 °C
Measured Head TSL parameters
(22.0 ± 0.2)
Head TSL temperature change during test
SAR result with Head TSL
SAR averaged over 1 cm (1
39.2
1.82 mho/m ± 6 %
----
---·Condition
g) of Head TSL
250 mW input power
SAR for nominal Head TSL parameters
cm 3
Conductivity
1.80 mho/m
39.3 ±6 %
<1.0 °C
SAR measured
SAR averaged over 10
Permittivity
13.1mW/g
52.2 mW l g ± 18.8 % (k=2)
normalized to 1W
Condition
(10 g) of Head TSL
6.06 mW lg
250 mW input power
SAR measured
SAR for nominal Head TSL parameters
24.2 mW /g ± 18.7 % (k=2)
normalized to 1W
Body TSL parameters
The f o II owtnQ
. parameters an d ca Icu Iat1ons
were aoor1ed .
Temperature
Nominal Body TSL parameters
22.0 °C
Measured Body TSL parameters
<1.0 °C
----
g) of Body TSL
cm 3
normalized to 1W
(10 g) of Body TSL
SAR measured
Certificate No: 218-97046
normalized to 1W
Page 3 of8
----
13.3 mW/ g
52.3 mW lg± 18.8 % (k=2)
Condition
250 mW input power
SAR for nominal Body TSL parameters
1.99 mho/m ± 6 %
Condition
250 mW input power
SAR for nominal Body TSL parameters
Conductivity
1.95 mho/m
51.2 ± 6 %
SAR measured
SAR averaged over 10
52.7
(22.0 ± 0.2) °C
Body TSL temperature change during test
SAR resu It WI"th B0 d1y TSL
SAR averaged over 1 cm (1
Permittivity
6.15 mW/ g
24.4 mW /g ± 18.7 % (k=2)
In Coll8boration with
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
http://www.chinattl.cn
E-mail: cttl@chinattl.com
Appendix (Additional assessments outside the scope of CNAS L0570)
Antenna Parameters with Head TSL
Impedance, transformed to feed point
53.20+ 3.99j0
Return Loss
- 26.1dB
Antenna Parameters with Body TSL
Impedance, transformed to feed point
49.50+ 6.34j0
Return Loss
- 23.9dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.025 ns
After long term use with 1DOW radiated power, only a slight warming of the dipole near the feed point can
be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly
connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some
of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded
according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not
affected by this change. The overall dipole length is still according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered
connections near the feedpoint may be damaged.
Additional EUT Data
I Manufactured by
Certificate No : ZI 8-97046
SPEAG
Page 4 of8
In Coffsboration with
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-1 0-62304633 -2079
Fax: +86-10-62304633-2504
http://www.chinattl.cn
E-mail: cttl@chinattl.com
DASY5 Validation Report for Head TSL
Date: 03.01.2018
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 929
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium parameters used : f= 2450 MHz; cr = 1.815 Sim; er= 39.34; p = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASYS Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3846; ConvF(7.59, 7.59, 7.59); Calibrated: 1/25/2018;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1525; Calibrated: 10/2/2017
Phantom: Triple Flat Phantom 5.IC; Type: QD 000 PSI CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(7417)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 105.6 V/m; Power Drift= -0.04 dB
Peak SAR (extrapolated) = 27 .1 W/kg
SAR(l g) = 13.1 W/kg; SAR(lO g) = 6.06 W/kg
Maximum value of SAR (measured) = 2 I .9 W/kg
dB
-4.41
-8.81
-13.22
-17.62
-22.03
L.
0 dB= 21.9 W/kg = 13.40 dBW/kg
Certificate No: Z 18-97046
Page 5 of8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 1001 9 1, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plot for Head TSL
I Trl S11 Log Mag 10. OOdB/ Ref 0 . OOOdB [FlJ
o . OO '>"l 2 .4 500000 GHZ - 26 .114 dB
4 0 . 00
3 0 . 00
20 . 00
1 0 . 00
0 . 000
- 1 0.00
-20 . 00
-3 0 . 00
- 4 0 . 00
- 50 . 00
~111!1 S11 smith (R+jx) scale 1.ooou [Fl Del ]
>1
2 . 4500000 GHZ
53.187 Cl
3 . 9918 Cl
2 5 9 ~ --
/'
"~
fl Start 2.25 G-!z
Certificate No: 218-97046
' '----~
!FBW 100 Hz
Page 6 of8
-----------
Stop 2.65 GHz •
- TTL
In Coll8boration with
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
DASY5 Validation Report for Body TSL
Date: 03.01.2018
Test Laboratory: CTTL, Beijing, China
DOT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 929
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; cr = 1.994 Sim ; Er= 51 .18; p = 1000 kg/m 3
Phantom section: Center Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63. l 9-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3846; ConvF(7.55, 7.55, 7.55); Calibrated: 1/25/2018;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1525; Calibrated: 10/2/2017
Phantom: Triple Flat Phantom 5. lC; Type: QD 000 PSI CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(7417)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value= 99.09 V/m; Power Drift= -0.04 dB
Peak SAR (extrapolated)= 28.0 W/kg
SAR(l g) = 13.3 W/kg; SAR(lO g) = 6.15 W/kg
Maximum value of SAR (measured) = 22.5 W/kg
dB
-4.44
-8.88
-13.33
-17.77
-22.21
0 dB = 22.5 W/kg = 13.52 dBW/kg
Certificate No: Z 18-97046
Page 7 of8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Be ijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-1 0-62304633-2504
E-mail: cttl@chinattl.com
http ://www.chinattl.cn
Impedance Measurement Plot for Body TSL
Trl 511 Log Mag 1 0 . OOdB/ Ref o. OOOdB-[Fl]
5o . OO >1 2 . 4500000 GHZ -23.905 dB
40 . 00
30 . 00
20 . 00
10. 00
0 . 000
-10 . 00
r----~~----~ ~
- 20.00
-3 0 . 00
- 40 . 00
II~ -
-50 . oo ~ - - - -- - - -·- - - - - - -511 smith (R+jX) scale 1. ooou [Fl Del ]
>1
2.4500000 GHZ
49. 523 O
6. 3432 0
,.,-·- -- - --
- -- -- --
-~
/.9f>-1:Jft- - ~
11 Start 2.25 GHz
Certificate No : Zl&-97046
IFBW l OO Hz
Page8of8
Stop 2.65 GHz ·
·1
~
In Collaboration with
- TTL s P e a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, JOO 19 1, China
Tel: +86- 10-62304633 -2079
Fax: +86-1 0-62304633-2504
E-mail: cttl@chinattl.com
http ://www.chinatt l.cn
Client
Certificate No:
Sporton
21 8-97047
CALIBRATION CERTIFICATE
Object
D2600V2 - SN: 1078
Calibration Procedure(s)
FF-211-003-01
Calibration Procedures for dipole validation kits
Calibration date:
March 1, 2018
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22±3)'C and
humidity<70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Scheduled Calibration
Power Meter NRVD
102196
02-Mar-17 (CTTL, No.J1 7X01254)
Mar-18
Power sensor NRV-25
Reference Probe EX3DV4
100596
02-Mar-17 (CTTL, No.J17X01254)
Mar-18
SN 3846
25-Jan-18(SPEAG,No. EX3-3846_Jan18)
Jan-19
DAE4
SN 1525
02-0ct-17(SPEAG,No.DAE4-1525_0ct17)
Oct-18
Secondary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Signal Generator E4438C
MY49071 430
23-Jan-18 (CTTL, No.J18X00560)
Jan-19
Network Analyzer E5071 C
MY46110673
24-Jan-18 (CTTL, No.J18X00561 )
Jan-19
Name
Function
Calibrated by:
Zhao Jing
SAR Test Engineer
Reviewed by:
Lin Hao
SAR Test Engineer
Approved by:
Qi Dianyuan
SAR Project Leader
Scheduled Calibration
Signature
'<{t -
- ~~
Issued: March 3, 2018
Th is calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: Z I 8-97047
Page I of 8
~
In Collaboration with
• TTL s
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633 -2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORMx,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak
Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human
exposure to rad io frequency fields from hand-held and body-mounted w ireless
communication devices- Part 1: Device used next to the ear (Frequency range of 300MHz to
6GHz)", July 2016
c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless
communication devices used in close proximity to the human body (frequency range of
30MHz to 6GHz)", March 2010
d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
•
SAR normalized: SAR as measured, normalized to an input power of 1 Wat the antenna
connector.
•
SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of
Measurement multiplied by the coverage factor k=2, which for a normal distribution
Corresponds to a coverage probability of approximately 95%.
Certificate No: Z I 8-97047
Page 2 of8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-1 0-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Measurement Conditions
DASY syst em con fi1guraf10n, as f ar as not given
on page
DASY Version
DASY52
Extrapolation
Advanced Extrapolation
Phantom
Triple Flat Phantom 5.1 C
Distance Dipole Center - TSL
52.10.0.1446
with Spacer
10 mm
Zoom Scan Resolution
dx, dy, dz= 5 mm
Frequency
2600 MHz ± 1 MHz
Head TSL parameters
Th e f oIIowing
. parameters an d caIcu Iafions were app r1ed .
Temperature
22.0 ·c
Nominal Head TSL parameters
Measured Head TSL parameters
(22.0 ± 0.2)
·c
1.96 mholm
39.1 ±6 %
1.92 mholm ± 6 %
_,,, __
----
250 mW input power
SAR for nominal Head TSL parameters
cm 3
Conductivity
Condition
g) of Head TSL
SAR measured
SAR averaged over 10
39.0
·c
<1.0
Head TSL temperature change during test
SAR result with Head TSL
SAR averaged over 1 cm (1
Permittivity
14.0 mW I g
56.5 mW lg ± 18.8 % (k=2)
normalized to 1W
Condition
(10 g) of Head TSL
SAR measured
250 mW input power
SAR for nominal Head TSL parameters
6.28 mW lg
25.3 mW lg± 18.7 % (k=2)
normalized to 1W
Body TSL parameters
Thtll
· paramet ers and
e o owing
calculafions were appr1ed .
Temperature
Nominal Body TSL parameters
22.0
Measured Body TSL parameters
(22.0 ± 0.2)
Body TSL temperature change during test
SAR resu It WI"th B0 dIY TSL
SAR averaged over 1 cm (1
·c
<1.o
cm 3
2.16 mholm
51 .0 ± 6 %
2.12 mholm ± 6 %
----
---
250 mW input power
normalized to 1W
(1 o g) of Body TSL
SAR measured
13.5 mW I g
54.1 mW /g
± 18.8 % (k=2)
Condition
250 mW input power
SAR for nominal Body TSL parameters
Certificate No: ZI 8-97047
·c
Conductivity
Condition
SAR for nominal Body TSL parameters
SAR averaged over 10
52.5
·c
g) of Body TSL
SAR measured
Permittivity
normalized to 1W
Page 3 of8
6.03 mW lg
24.1 mW lg± 18.7 % (k=2)
In Collaboration with
CALIBRATION LABORATORY
Add: No.SJ Xueyuan Road, Haidian District, Beijing, 1001 91, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
http://www.chinattl.cn
E-mail: cttl@chinattl.com
Appendix(Additional assessments outside the scope of CNAS L0570)
Antenna Parameters with Head TSL
49.50- 6.93j0
Impedance, transformed to feed point
Return Loss
- 23.2dB
Antenna Parameters with Body TSL
45.80- 6.59j0
Impedance, transformed to feed point
Return Loss
- 21.8dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.017 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can
be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly
connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some
of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded
according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not
affected by this change. The overall dipole length is still according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered
connections near the feedpoint may be damaged.
Additional EUT Data
j Manufactured by
Certificate No: Z IS-97047
SPEAG
Page 4 of8
- TTL
In Collaboration with
p e a g
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
DASYS Validation Report for Head TSL
Date: 03 .01.2018
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 - SN: 1078
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1: I
Medi um parameters used : f = 2600 MHz; er = 1.921 S/m; sr = 3 9. 09; p = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63 .19-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3846; ConvF(7.42, 7.42, 7.42); Calibrated: 1/25/2018;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1525; Calibrated: 10/2/2017
Phantom: Triple Flat Phantom 5. IC; Type: QD 000 P51 CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(7417)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid : dx=5mm,
dy=5mm, dz=5mm
Reference Value = 108. 7 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated)= 30.2 W/kg
SAR(l g) = 14 W/kg; SAR(lO g) = 6.28 W/kg
Maximum value of SAR (measured) = 24.2 W/kg
dB
-4.72
-9.44
-14.16
-18.88
-23.60
L.
0 dB = 24.2 W/kg = 13.84 dBW/kg
Certificate No: Zl 8-97047
Page 5 of8
In Collaboration with
s p
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100 191 , China
Tel: +86-1 0-62304633-2079
Fax: +86- 10-62304633-2504
http://www.chinattl.cn
E-mail: cttl@chinattl.com
Impedance Measurement Plot for Head TSL
Trl SllLog Mag
SO . OO >1
40 . 00
10.00dB/'Ref 0. OOOde1Fl ]-
2 . 6000000 GHZ -23.152
30. 00
20 . 00
10 .00
0 .000
- 10 . 00
-20 . 00
··3U . 00
-40 . 00
~------- -----------r------ - ---~- - -- - - - --'
-50 . 00
s11 smith (R+jx) scal e 1.ooou [Fl Del]
~Ill
>1
2.6000000 GHZ
49.530 a -6.9250 a
'""
8.8 3 ~
/~·
//
h Stat 2.4 GHz
----------- ~
lOOHz
Certificate No: Zl 8-97047
IF8W
Page 6 of8
Stop 2.8 GHz •
- TTL
In Collaboration with
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-6230463 3-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
DASY5 Validation Report for Body TSL
Date: 03.01.2018
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 - SN: 1078
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1: 1
Medium parameters used: f = 2600 MHz; cr = 2.12 S/m; er= 50.96; p = 1000 kg/m 3
Phantom section: Center Section
Measurement Standard: DASY5 (IEEE/IEC/ ANSI C63.19-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3846; ConvF(7.04, 7.04, 7.04); Calibrated: 1/25/2018;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn 1525; Calibrated: 10/2/2017
Phantom: Triple Flat Phantom 5.lC; Type: QD 000 P51 CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(7417)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value= 101.2 V/m; Power Drift= 0.01 dB
Peak SAR (extrapolated)= 29.3 W/kg
SAR(l g) = 13.5 W/kg; SAR(lO g) = 6.03 W/kg
Maximum value of SAR (measured)= 23.2 W/kg
dB
-4.70
-9.40
-14.11
-18.81
-23.51
L.
0 dB = 23.2 W/kg = 13.65 dBW/kg
Certificate No: Zl 8-97047
Page 7 of8
In Collaboration with
a 9
CALIBRATION LABORATORY
Add: No.S I Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86-1 0-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plot for Body TSL
Tr1 s11 Log Mag 10. oodei7'"Ref o. oooda [F1]
5o . OO
40 . 00
>1
2 . 6000000 GH2 -21 . 764
30 . 00
20.00
10 . 00
0 . 000
-2 0 . 00
-30 . 00
-40 . 00
- 50 . 00
~1111 S11 sm1th
>1
(R+jx) scale 1.ooou [F1 Del]
2.6000000 GH2
f1 Start 2.4 Glz
Certificate No: 218-97047
45.765 0 -6.5913 0
9.287
IFBW lOOHz
Page 8 of&
Stop 2.8 Glz -
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Accreditation No.:
Swiss Calibration Service
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Auden
Certificate No:
05GHzV2-1203_Dec17
CALIBRATION CERTIFICATE
Object
D5GHzV2 - SN:1203
Calibration procedure(s)
QA CAL-22.v2
Calibration procedure for dipole validation kits between 3-6 GHz
Calibration date:
December 14, 2017
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date (Certificate No.)
Scheduled Calibration
Power meter NAP
SN: 104778
04-Apr-17 (No. 217-02521 /02522)
Power sensor NRP-291
Power sensor NRP-291
SN: 103244
04-Apr-17 (No. 217-02521)
Apr-18
Apr-18
SN: 103245
04-Apr-17 (No. 217-02522)
Apr-18
Reference 20 dB Attenuator
SN: 5058 (20k)
Apr-18
Type-N mismatch combination
SN: 5047.2 / 06327
07-Apr-17 (No. 217-02528)
07-Apr-17 (No. 217-02529)
Reference Probe EX3DV4
SN: 3503
31-Dec-16 (No. EX3-3503_Dec16)
Dec-17
DAE4
SN: 601
26-0ct-17 (No. DAE4-601 _0ct17)
Oct-18
Secondary Standards
ID #
Check Date (in house)
Scheduled Check
Power meter EPM-442A
SN: GB37480704
07-0ct-15 (in house check Oct-16)
In house check: Oct-18
Power sensor HP 8481 A
Power sensor HP 8481A
SN: US37292783
SN: MY4109231 7
07-0ct-15 (in house check Oct-16)
07-0ct-15 (in house check Oct-16)
In house check: Oct-18
In house check : Oct-18
RF generator R&S SMT-06
SN: 100972
15-Jun-15 (in house check Oct-16)
In house check: Oct-18
Network Analyzer HP 8753E
SN: US37390585
18-0ct-0 1 (in house check Oct-17)
In house check: Oct-18
Name
Function
Calibrated by:
Michael Weber
Laboratory Technician
Approved by:
Katja Pokovic
Technical Manager
Apr-18
1ikr-~~
Issued: December 15, 2017
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: 05GHzV2-1203_Dec17
Page1of13
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Accred itation No.:
Swiss Calibration Service
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORM x,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak SpatialAveraged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1 , "Measurement procedure for the assessment of Specific Absorption Rate
(SAR) from hand-held and body-mounted devices used next to the ear (frequency range of
300 MHz to 6 GHz)", July 2016
c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless
communication devices used in close proximity to the human body (frequency range of 30
MHz to 6 GHz)", March 2010
d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz"
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom . The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 Wat the antenna
connector.
• SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, wh ich for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: 0 5GHzV2-1203_Dec17
Page 2 of 13
Measurement Conditions
DASY svstem con f'1gurat1on, as ar as not ~ iven on paqe 1.
DASY Version
DASY5
Extrapolation
Advanced Extrapolation
Phantom
Modular Flat Phantom V5.0
Distance Dipole Center - TSL
Zoom Scan Resolution
V52.10.0
10 mm
dx, dy = 4.0 mm, dz
Frequency
with Spacer
= 1.4 mm
Graded Ratio = 1.4 (Z direction)
5250 MHz ± 1 MHz
5600 MHz ± 1 MHz
5750 MHz + 1 MHz
Head TSL parameters at 5250 MHz
Thtll
· parameters an d
e o owing
calculat1ons
were appI'd
1e .
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °c
35.9
4.71 mho/m
(22.0 ± 0.2) c
35.7 ±6 %
4.56 mho/m ± 6 %
< 0.5 °C
.........
----
SAR result with Head TSL at 5250 MHz
SAR averaged over 1 cm 3 (1 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
SAR averaged over 10 cm3 (10 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
Certificate No: D5GHzV2-1203_Dec17
Condition
100 mW input power
8.10W/kg
normalized to 1W
80.8 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.33 W/kg
normalized to 1W
23.2 W/kg ± 19.5 % (k=2)
Page 3 of 13
Head TSL parameters at 5600 MHz
Th e fo II owing
. parameters and calculations were applied.
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °c
35.5
5.07 mho/m
(22.0 ± 0.2) °C
35.2 ±6 %
4.91 mho/m ± 6 %
< 0.5 °C
--- ..
----
SAR result with Head TSL at 5600 MHz
SAR averaged over 1 cm3 (1 g) of Head TSL
SAR measured
Condition
100 mW input power
8.44 W/kg
normalized to 1W
84.1 W /kg± 19.9 % (k=2)
SAR for nominal Head TSL parameters
SAR averaged over 1O cm3 (1 O g) of Head TSL
SAR measured
condition
100 mW input power
2.39 W/kg
normalized to 1W
23.8 W/kg ± 19.5 % (k=2)
SAR for nominal Head TSL parameters
Head TSL parameters at 5750 MHz
The fo II owing
. parameters and calculations were applied.
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
35.4
5.22 mho/m
(22.0 ± 0.2) °C
35.0 ±6 %
5.07 mho/m ± 6 %
< 0 .5 °C
----
----
SAR result with Head TSL at 5750 MHz
SAR averaged over 1 cm3 (1 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
SAR averaged over 1O cm3 (1 O g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
Certificate No: D5GHzV2-1203_Dec17
Condition
100 mW input power
8.08 W/kg
normalized to 1W
80.5 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.29 W/kg
normalized to 1W
22.8 W/kg ± 19.5 % (k=2)
Page 4 of 13
Body TSL parameters at 5250 MHz
Th e fo II ow1nq
. parameters an d ca Iculations were applied.
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °c
48.9
5.36 mho/m
(22.0 ± 0.2) °C
47.1±6 %
5.51 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Body TSL at 5250 MHz
SAR averaged over 1 cm3 (1 g) of Body TSL
SAR measured
Condition
100 mW input power
7.80 W/kg
normalized to 1W
77.5 W/kg ± 19.9 % (k=2)
SAR for nominal Body TSL parameters
SAR averaged over 10 cm 3 (1 O g) of Body TSL
SAR measured
condition
100 mW input power
2.17 W/kg
normalized to 1W
21 .5 W/kg ± 19.5 % (k=2)
SAR for nominal Body TSL parameters
Body TSL parameters at 5600 MHz
The f o II owing
. parameters an d caIcu Iat1ons
were appr1ed
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
48.5
5.77 mho/m
46.5 ±6 %
5.97 mho/m ± 6 %
----
----
(22.0 ± 0 .2)
< 0.5 °C
SAR result with Body TSL at 5600 MHz
SAR averaged over 1 cm3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 10 cm3 (10 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D5GHzV2-1203_Dec17
Condition
100 mW input power
7.99 W/kg
normalized to 1W
79.3 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2 .23 W/kg
normalized to 1W
22.1 W/kg ± 19.5 % (k=2)
Page 5 of 13
Body TSL parameters at 5750 MHz
The tll
· parameters and ca1cu1·
o ow1nQ
at1ons were app l"1e d
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
48.3
5.94 mho/m
(22.0 ± 0.2) °C
46.2 ±6 %
6. 18 mho/m ± 6 %
< 0.5 °C
----
---·
SAR result with Body TSL at 5750 MHz
SAR averaged over 1 cm 3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 1O cm3 (1 O g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D5GHzV2-1203_Dec17
Condition
100 mW input power
7.74 W/kg
normalized to 1 W
76.8 W/kg :t 19.9 % (k=2)
condition
100 mW input power
2. 15 W /kg
normalized to 1W
21.3 W/kg :t 19.5 % (k=2)
Page 6 of 13
Appendix (Additional assessments outside the scope of SCS 0108)
Antenna Parameters with Head TSL at 5250 MHz
Impedance, transformed to feed point
49.0 Q - 2.3 jQ
Return Loss
- 31 .8 dB
Antenna Parameters with Head TSL at 5600 MHz
51.8 Q + 3.0 jQ
Impedance, transformed to feed point
Return Loss
- 29.3 dB
Antenna Parameters with Head TSL at 5750 MHz
53.8 Q + 5.5 jQ
Impedance, transformed to feed point
Return Loss
- 23.8 dB
Antenna Parameters with Body TSL at 5250 MHz
Impedance, transformed to feed point
47.6 Q - 0.8 jQ
Return Loss
- 31 .9 dB
Antenna Parameters with Body TSL at 5600 MHz
53.0 Q + 3.3 jQ
Impedance , transformed to feed point
Return Loss
- 27.2 dB
Antenna Parameters with Body TSL at 5750 MHz
53.9 Q + 5.6 jQ
Impedance, transformed to feed point
- 23.7 dB
Return Loss
General Antenna Parameters and Design
Electrical Delay (one direction)
1.192 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions" paragraph. The SAR data are not affected by this change . The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the
feedpoint may be damaged.
Additional EUT Data
Manufactured by
SPEAG
Manufactured on
September 11 , 2014
Certificate No: D5GHzV2-1203_Dec17
Page 7 of 13
DASY5 Validation Report for Head TSL
Date: 14.12.2017
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN: 1203
Communication System: SOM - GVD; Frequency: 5250 MHz, Frequency: 5600 MHz, Frequency: 5750
MHz
Communication System Frame Length in ms: 0
Medium parameters used: f = 5250 MHz; cr = 4.56 Sim; tr = 35.7; p = 1000 kg/m3 ,
Medium parameters used: f = 5600 MHz; cr = 4.91 Sim; tr = 35.2; p = 1000 kg/m 3 ,
Medium parameters used: f = 5750 MHz; cr = 5.07 Sim; Er = 35; p = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-201 l)
DASY52 Configuration:
•
Probe: EX3DV4 - SN3503; ConvF(5.58, 5.58, 5.58); Calibrated: 31.12.2016, ConvF(5.09, 5.09,
5.09); Calibrated: 31.12.2016, ConvF(5.02, 5.02, 5.02); Calibrated: 31.12.2016;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 26.10.2017
•
Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001
•
DASY52 52.10.0(1446); SEMCAD X 14.6.10(74 17)
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5250 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 75.06 V/m; Power Drift= -0.09 dB
Peak SAR (extrapolated) = 29.7 W/kg
SAR(l g) = 8.1 W/kg; SAR(lO g) = 2.33 W/kg
Maximum value of SAR (measured) = 18.9 W/kg
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5600 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 72.24 V/m; Power Drift= -0.08 dB
Peak SAR (extrapolated) = 33.4 W/kg
SAR(l g) = 8.44 W/kg; SAR(lO g) = 2.39 W/kg
Maximum value of SAR (measured) = 20.4 W /kg
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5750 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 70.55 V/m; Power Drift= -0.07 dB
Peak SAR (extrapolated) = 32.7 W/kg
SAR(l g) = 8.08 W/kg; SAR(lO g) = 2.29 W/kg
Maximum value of SAR (measured)= 19.8 W/kg
Certificate No: 0 5GHzV2-1203_Dec17
Page 8 of 13
dB
-5.00
-10.00
-15.00
-20.00
-25.00
0 dB = 19.8 W/kg = 12.97 dBW/kg
Certificate No: 05GHzV2-1203_Dec17
Page 9 of 13
Impedance Measurement Plot for Head TSL
lm) S11
1: 48. 951 o
1 U f"S
13 De c 2017 12 : 32 : 46
-2.3047 o 13.154 pf"
5 250. 000 000 MHz
---r-----
'·- - - ......r/
De l
1'
- - - ' - - - -~ ~
1--\
\,
-.
2: 51.770 o
3. 0273 o
5. 60000 GHz
)''_..
... - ·~
~ ---~-_.;.......
i. ..,
__
3: 53.766 o
5.5430 o
5.75000 GHz
•.S :;;. -
- ., ., . . -- ·· 1
Avg
' - L-- ,
16
....
'/
--).
'/
Hld
CH2
CH1 Markers
Cor
'- ,,. -,I - . .\ '
-l--S11
LOG
5 d B/ REF - 20 dB
1" - 31 837 dB
5 250 000 000 MHz
CH2 Markers
2:- 29.257 dB
5 . 60000 GHz
Cor
i-----,_
"-..
Avg
16
I\ !.
Hld
./ r----.._
fJ
"-
,l
START 5 000.000 000 MHz
Certificate No: D5GHzV2-1203_Dec17
.....__.,,.
----'-'
3:- 2 3. 801 dB
5. 7 5000 GHz
~ ,-.--
STOP 6 000. 000 000 MHz
Page 10 of 13
DASY5 Validation Report for Body TSL
Date: 13.12.2017
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN: 1203
Communication System: UID O - CW; Frequency: 5250 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz
Medium parameters used: f = 5250 MHz; cr = 5.51 Sim; Sr = 47.1; p = 1000 kg/m3 ,
Medium parameters used: f = 5600 MHz; cr = 5.97 Sim; Sr = 46.5; p = 1000 kg/m3 ,
Medium parameters used: f = 5750 MHz; cr = 6.18 Sim; Sr = 46.2; p = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-201 l)
DASY52 Configuration:
•
Probe: EX3DV4- SN3503; ConvF(5. 14, 5.14, 5.14); Calibrated: 31.12.2016, ConvF(4.57, 4.57,
4.57); Calibrated: 3l.12.2016, ConvF(4.51, 4.51, 4.51); Calibrated: 31.12.2016;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 26.10.2017
•
Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002
•
DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5250 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 64.77 V/m; Power Drift= -0.05 dB
Peak SAR (extrapolated)= 30.6 Wlkg
SAR(l g) =7.8 W/kg; SAR(lO g) =2.17 W/kg
Maximum value of SAR (measured)= 18.8 W/kg
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5600 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 64.27 V/m; Power Drift= -0.02 dB
Peak SAR (extrapolated) = 34.0 Wlkg
SAR(l g) =7.99 W/kg; SAR(lO g) =2.23 W/kg
Maximum value of SAR (measured)= 19.8 W/kg
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5750 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value = 62.30 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated)= 34.3 Wlkg
SAR(l g) =7.74 W/kg; SAR(lO g) =2.15 W/kg
Maximum value of SAR (measured)= 19.4 W/kg
Certificate No: D5GHzV2-1203_Dec17
Page 11 of 13
dB
-5.00
-10.00
-15.00
-20.00
-25.00
0 dB= 19.4 W/kg = 12.88 dBW/kg
Certificate No: 05GHzV2-1203_Dec17
Page 12 of 13
Impedance Measurement Plot for Body TSL
rnJ
1 U FS
S11
1: 4 7. 64 6 fi
13 Dec 2017 12 : 32:04
-77 7. 3 4 mo 38. 9 9 8 p F
5 250. 000 000 MHz
, --r---
,(
CH1 Markers
De l
Cor
1:
~~
Av g
3: 53.895 fi
5. 5547 fi
5. 75000 GHz
16
' \.
\ _.
';" - -- ~'>-
Hl d
CH2
2: 5 3. 021 fi
3. 33 20 fi
5. 60000 GHz
_/
-.1---'
S 11
LOG
5 dB i REF - 20 dB
1:- 3 1 919 d B
5 250. 0 00 000 MHz
CH2 Ma rk e rs
2:- 27. 190 dB
5. 6 000 0 GHz
Co r
-'-
----
Av g
16
Hld
\ !.
/ I~
_,,,.,.-, ~
---
3:- 23. 708 dB
5. 75 0 0 0 GH z
----..
-........ ~
"1\/
S TART 5 000.000 000 MHz
Certificate No: 05GHzV2-1203_Dec17
ST OP 6 000.000 000 MHz
Page 13 of 13
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Sporton
Certificate No:
DAE3-495_May18
CALIBRATION CERTIFICATE
Object
DAE3- SD 000 003 AD - SN: 495
Calibration procedure(s)
QA CAL-06.v29
Calibration procedure for the data acquisition electronics (DAE)
Calibration date:
May 24, 2018
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
m#
Primary Standards
Keithley Multimeter Type 2001
I SN: 0810278
Cal Date (Certificate No.)
Scheduled Calibration
31-Aug-17 (No:21092)
Aug-18
Check Date (in house)
Scheduled Check
Secondary Standards
ID#
Auto DAE Calibration Unit
SE UWS 053 AA 1001 04-Jan-18 (in house check)
In house check: Jan-19
Calibrator Box V2.1
SE UMS 006 AA 1002
In house check: Jan-19
Name
Function
Calibrated by:
Dominique Steffen
Laboratory Technician
Approved by:
Sven Kuhn
Deputy Manager
04-Jan-18 (in house check)
Signature
Issued: May 24, 2018
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: DAE3-495_May18
Page 1 of 5
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary
DAE
Connector angle
data acquisition electronics
information used in DASY system to align probe sensor X to the robot
coordinate system.
Methods Applied and Interpretation of Parameters
•
DC Voltage Measurement: Calibration Factor assessed for use in DASY system by
comparison with a calibrated instrument traceable to national standards. The figure given
corresponds to the full scale range of the voltmeter in the respective range.
•
Connector angle: The angle of the connector is assessed measuring the angle
mechanically by a tool inserted. Uncertainty is not required.
•
The following parameters as documented in the Appendix contain technical information as a
result from the performance test and require no uncertainty.
•
DC Voltage Measurement Linearity: Verification of the Linearity at + 10% and -10% of
the nominal calibration voltage. Influence of offset voltage is included in this
measurement.
•
Common mode sensitivity: Influence of a positive or negative common mode voltage on
the differential measurement.
•
Channel separation: Influence of a voltage on the neighbor channels not subject to an
input voltage.
•
AD Converter Values with inputs shorted: Values on the internal AD converter
corresponding to zero input voltage
•
Input Offset Measurement Output voltage and statistical results over a large number of
zero voltage measurements.
•
Input Offset Current: Typical value for information; Maximum channel input offset
current, not considering the input resistance.
•
Input resistance: Typical value for information: DAE input resistance at the connector,
during internal auto-zeroing and during measurement.
•
Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery
alarm signal is generated.
•
Power consumption: Typical value for information . Supply currents in various operating
modes.
Certificate No: DAE3-495_May18
Page 2 of 5
DC Voltage Measurement
AID - Converter Resolution nominal
High Range:
1L8B =
6.1µV,
full range= -100 ... +300 mV
Low Range:
1L8B =
61nV,
full range= -1 ....... +3mV
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
High Range
404.400 ± 0.02% (k=2)
405.380 ± 0.02% (k=2)
405.751 ± 0.02% (k=2)
Low Range
3.95295 ± 1.50% (k=2)
3.99115 ± 1.50% (k=2)
3.96710 ± 1.50% (k=2)
Calibration Factors
Connector Angle
73.0 ° ± 1 °
Connector Angle to be used in DASY system
Certificate No: DAE3-495_May18
Page 3 of 5
Appendix (Additional assessments outside the scope of SCS0108)
1. DC Voltaae Linearitv
High Range
Reading (µV)
Difference (µV)
Error(%)
Channel X
+ Input
200038.36
0.43
0.00
ChannelX
+ Input
20007.02
0.84
0.00
ChannelX
- Input
-20001.18
3.92
-0.02
ChannelY
+ Input
200038.71
0.86
0.00
ChannelY
+ Input
20005.03
-1.06
-0.01
ChannelY
- Input
-20003.38
1.86
-0.Q1
Channel Z
+ Input
200038.61
0.44
0.00
ChannelZ
+ Input
20007.94
2.01
0.01
ChannelZ
- Input
-20002.34
2.97
-0.01
Reading (µV)
Difference (µV)
Low Range
Error(%)
ChannelX
+ Input
2002.78
0.73
0.04
Channel X
+ Input
202.83
0.89
0.44
ChannelX
- Input
-198.36
-0.26
0.13
Channel Y
+ Input
2001.27
-0.64
-0.03
Channel Y
+ Input
201.58
-0.18
-0.09
ChannelY
- Input
-198.95
-0.71
0.36
Channel Z
+ Input
2000.20
-1.55
-0.08
Channel Z
+ Input
200.38
-1.37
-0.68
Channel Z
- Input
-198.97
-0.61
0.31
2. Common mode sensitivity
DASY measurement parameters: A uto Zera T ime: 3 sec; Measunnq time: 3 sec
Common mode
Input Voltage (mV)
ChannelX
Channel Y
Channel Z
High Range
Average Reading (µV)
Low Range
Average Reading (µV)
200
4.60
2.87
-200
-1.80
-3.53
200
0.03
0.11
-200
-1.19
-1.40
200
1.82
1.73
-200
-5.14
-4.99
3. Channel separation
DASY measurement parameters: Auto Zero Time: 3 sec; Measurinq time: 3 sec
Input Voltage (mV)
Channel X (µV)
Channel Y (µV)
Channel Z (µV)
ChannelX
200
-1.03
-2.94
ChannelY
200
7.80
-0.33
ChannelZ
200
5.68
5.73
Certificate No: DAE3-495_May18
Page 4 of 5
4. AD-Converter Values with inputs shorted
DASY measurement parameters: Auto Zero Time: 3 sec; Measurina time: 3 sec
High Range (LSB)
Low Range (LSB)
Channel X
15812
16929
ChannelY
15758
16682
Channel Z
15906
17274
5. Input Offset Measurement
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
Input 10MQ
Average (µV)
min. Offset (µV)
max. Offset (µV)
Std. Deviation
luVl
Channel X
0.60
-0.57
2.52
0.64
Channel Y
1.99
0.41
3.70
0.64
Channel Z
-1.70
-3.34
-0.12
0.66
6. Input Offset Current
Nominal Input circuitry offset current on all channels: <25fA
7. In out Resistance
(T""ical values for information)
Zeroing (kOhm)
Measuring (MOhm)
Channel X
200
200
Channel Y
200
200
ChannelZ
200
200
8. Low Batterv Alarm Voltaae
Typical values
(Typical values for information\
Alarm Level (VDC)
Supply(+ Vee)
+7.9
Supply (- Vee)
-7.6
9. Power Consumotion
(Tvpical values for information)
Typical values
Switched off (mA)
Stand by (mA)
Transmitting (mA)
Supply(+ Vee)
+0.01
+6
+14
Supply (- Vee)
-0.01
-8
-9
Certificate No: DAE3-495_May18
Page 5 of 5
Calibration Laboratory of
Schmid & Partner
Engineering AG
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Swiss Calibration Service
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Sporton
Certificate No:
DAE4-1399_Nov18
1CALIBRATION CERTIFICATE
Object
DAE4 - SD 000 004 BM - SN: 1399
Calibration procedure(s)
QA CAL-06.v29
Calibration procedure for the data acquisition electronics (DAE)
Calibration date:
November 16, 2018
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
Keithley Multimeter Type 2001
I SN: 0810278
Cal Date (Certificate No.)
Scheduled Calibration
03-Sep-18 (No:23488)
Sep-19
Scheduled Check
Secondary Standards
ID#
Check Date (in house)
Auto DAE Calibration Unit
SE UWS 053 AA 1001
04-Jan-18 (in house check)
In house check: Jan-19
Calibrator Box V2.1
SE UMS 006 AA 1002
04-Jan-18 (in house check)
In house check: Jan-19
Name
Function
Calibrated by:
Adrian Gehring
Laboratory Technician
Approved by:
Sven Kuhn
Deputy Manager
Signature
)fhJ~
Issued: November 16, 2018
This calibration certificate shalt not be reproduced except in full without written approval of the laboratory.
Certificate No: DAE4-1399_Nov18
Page 1 of 5
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary
DAE
Connector angle
data acquisition electronics
information used in DASY system to align probe sensor X to the robot
coordinate system.
Methods Applied and Interpretation of Parameters
•
DC Voltage Measurement: Calibration Factor assessed for use in DASY system by
comparison with a calibrated instrument traceable to national standards. The figure given
corresponds to the full scale range of the voltmeter in the respective range .
•
Connector angle: The angle of the connector is assessed measuring the angle
mechanically by a tool inserted. Uncertainty is not required .
•
The following parameters as documented in the Appendix contain technical information as a
result from the performance test and require no uncertainty.
•
DC Voltage Measurement Linearity: Verification of the Linearity at + 10% and -10% of
the nominal calibration voltage. Influence of offset voltage is included in this
measurement.
•
Common mode sensitivity: Influence of a positive or negative common mode voltage on
the differential measurement.
•
Channel separation: Influence of a voltage on the neighbor channels not subject to an
input voltage.
•
AD Converter Values with inputs shorted: Values on the internal AD converter
corresponding to zero input voltage
•
Input Offset Measurement Output voltage and statistical results over a large number of
zero voltage measurements.
•
Input Offset Current: Typical value for information; Maximum channel input offset
current, not considering the input resistance.
•
Input resistance: Typical value tor information: DAE input resistance at the connector,
during internal auto-zeroing and during measurement.
•
Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery
alarm signal is generated.
•
Power consumption: Typical value tor information. Supply currents in various operating
modes.
Certificate No: DAE4-1399_Nov18
Page 2 of 5
DC Voltage Measurement
AID - Converter Resolution nominal
High Range:
1LSB =
6.1µV,
full range= -100 ... +300 mV
Low Range:
1LSB =
61nV,
full range= -1 ....... +3mV
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
High Range
403.615 ± 0.02% (k=2)
403.876 ± 0.02% (k=2)
403.729 ± 0.02% (k=2)
Low Range
3.98279 ± 1.50% (k=2)
3.99313 ± 1.50% (k=2)
3.98038 ± 1.50% (k=2)
Calibration Factors
Connector Angle
302.5 ° ± 1 °
Connector Angle to be used in DASY system
Certificate No: DAE4-1399_Nov18
Page 3 of 5
Appendix (Additional assessments outside the scope of SCS0108)
1. DC V otaqe
L"meantv
High Range
Reading (µV)
Difference (µV)
Error(%)
ChannelX
+ Input
199995.97
-0.84
-0.00
ChannelX
+ Input
20003.53
1.96
0.01
ChannelX
- Input
-20000.06
1.70
-O.D1
Channel Y
+ Input
199996.26
-0.65
-0.00
Channel Y
+ Input
20000.25
-1.15
-0.01
Channel Y
- Input
-20001.89
0.03
-0.00
ChannelZ
+ Input
199995.39
-1.51
-0.00
ChannelZ
+ Input
19999.77
-1.56
-0.01
Channel Z
- Input
-20003.54
-1.57
0.01
Reading (µV)
Difference (µV)
Low Range
Error(%)
ChannelX
+ Input
2001.10
0.21
0.01
ChannelX
+ Input
201.44
0.27
0.13
Channel X
- Input
-198.21
0.48
-0.24
ChannelY
+ Input
2001.07
0.28
0.01
Channel Y
+ Input
200.13
-0.82
-0.41
Channel Y
- Input
-199.82
-0.96
0.49
Channel Z
+ Input
2000.99
0.25
0.01
Channel Z
+ Input
200.17
-0.73
-0.36
Channel Z
- Input
-199.39
-0.48
0.24
2. Common mode sensitivity
DASY measurement parameters: A uto Z ero T 1me: 3 sec; MeasunnQ time: 3 sec
Common mode
Input Voltage (mV)
Channel X
Channel Y
High Range
Average Reading (µV)
200
-5.15
-6.61
- 200
7.82
6.45
200
-5.89
-6.47
4.11
4.20
200
-7.04
-6.67
-200
5.06
5.01
-200
Channel Z
Low Range
Average Reading (µV)
3. Channel separation
DASY measurement parameters· Auto Zero Time· 3 sec· Measuring time· 3 sec
Input Voltage (mV)
Channel X (µV)
Channel Y (µV)
Channel Z (µV)
Channel X
200
4.43
-1.37
Channel Y
200
10.10
6.50
Channel Z
200
8.99
6.87
Certificate No: DAE4-1399_Nov18
Page 4 of 5
4. AD-Converter Values with inputs shorted
DASY measurement oarameters: Auto Zero Time: 3 sec; Measurinn time: 3 sec
High Range (LSB)
Low Range (LSB)
Channel X
15819
15315
Channel Y
16117
16356
Channel Z
15883
15504
5. Input Offset Measurement
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
Input 10MQ
Average (µV)
min. Offset (µVJ
max. Offset (µV)
Std. Deviation
(u.V)
Channel X
0.62
-0.33
1.64
0.36
Channel Y
0.11
-1.02
1.57
0.46
Channel Z
-0.26
-1.48
1.84
0.52
6. Input Offset Current
Nominal Input circuitry offset current on all channels: <25/A
7. In out Resistance
(Typical values for information)
Zeroing (kOhm)
Measuring (MOhm)
ChannelX
200
200
Channel Y
200
200
Channel Z
200
200
8. Low Batterv Alarm Voltaae
Typical values
(Typical values for information)
Alarm Level (VDC)
Supply(+ Vee)
+7.9
Supply (- Vee)
-7.6
9. Power Consumotion
(Tvpical values for information)
Typical values
Switched off (mA)
Stand by (mA)
Transmitting (mA)
Supply(+ Vee)
+0.01
+6
+14
Supply (- Vee)
-0.01
-8
-9
Certificate No: DAE4-1399_Nov18
Page 5 of 5
Calibration Laboratory of
Schmid & Partner
Engineering AG
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Swiss Calibration Service
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Sporton
Certificate No:
DAE3·577_Sep18
CALIBRATION CERTIFICATE
Object
DAE3 - SD 000 D03 AA - SN: 577
Calibration procedure(s)
QA CAL-06.v29
Calibration procedure for the data acquisition electronics (DAE)
Calibration date:
September 19, 2018
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
Keithley Multimeter Type 2001
j SN: 0810278
Cal Date (Certificate No.)
Scheduled Calibration
03-Sep-18 (No:23488)
Sep-19
Secondary Standards
ID #
Check Date (in house)
Scheduled Check
Auto DAE Calibration Unit
SE UWS 053 AA 1001
04-Jan-18 (in house check)
In house check: Jan-19
Calibrator Box V2 .1
SE UMS 006 AA 1002
04-Jan-18 (in house check)
In house check: Jan-19
Name
Function
Calibrated by:
Dominique Steffen
Laboratory Technician
Approved by:
Sven Kuhn
Deputy Manager
Signature
Issued: September 20, 2018
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: DAE3-577_Sep18
Page 1 of 5
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary
DAE
Connector angle
data acquisition electronics
information used in DASY system to align probe sensor X to the robot
coordinate system.
Methods Applied and Interpretation of Parameters
•
DC Voltage Measurement: Calibration Factor assessed for use in DASY system by
comparison with a calibrated instrument traceable to national standards. The figure given
corresponds to the full scale range of the voltmeter in the respective range.
•
Connector angle: The angle of the connector is assessed measuring the angle
mechanically by a tool inserted. Uncertainty is not required.
•
The following parameters as documented in the Appendix contain technical information as a
result from the performance test and require no uncertainty.
•
DC Voltage Measurement Linearity: Verification of the Linearity at + 10% and -10% of
the nominal calibration voltage. Influence of offset voltage is included in this
measurement.
•
Common mode sensitivity: Influence of a positive or negative common mode voltage on
the differential measurement.
•
Channel separation: Influence of a voltage on the neighbor channels not subject to an
input voltage.
•
AD Converter Values with inputs shorted: Values on the internal AD converter
corresponding to zero input voltage
•
Input Offset Measurement. Output voltage and statistical results over a large number of
zero voltage measurements.
•
Input Offset Current: Typical value for information; Maximum channel input offset
current, not considering the input resistance .
•
Input resistance: Typical value for information: DAE input resistance at the connector,
during internal auto-zeroing and during measurement.
•
Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery
alarm signal is generated.
•
Power consumption: Typical value for information. Supply currents in various operating
modes.
Certificate No: DAE3-577_Sep18
Page 2 of 5
DC Voltage Measurement
AID - Converter Resolution nominal
High Range:
1LSB =
6.1µV,
full range= -100 ... +300 mV
Low Range:
1LSB =
61nV,
full range= -1.. ..... +3mV
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
High Range
403.570 ± 0.02% (k=2)
403.555 ± 0.02% (k=2)
403.860 ± 0.02% (k=2)
Low Range
3.92675 ± 1.50% (k=2)
3.94171 ± 1.50% (k=2)
3.96140 ± 1.50% {k=2)
Calibration Factors
Connector Angle
190.5 ° ± 1 °
Connector Angle to be used in DASY system
Certificate No: DAE3-577_Sep18
Page 3 of 5
Appendix (Additional assessments outside the scope of SCS0108)
1. DC Voltaae Lmeantv
High Range
Reading (µV)
Difference (µV)
Error(%)
ChannelX
+ Input
200038.36
-0.72
-0.00
ChannelX
+ Input
20010.00
4.45
0.02
ChannelX
- Input
-20002.48
3.65
-0.02
ChannelY
+ Input
200036.35
-3.15
-0.00
Channel Y
+ Input
20005.24
-0.27
-0.00
Channel Y
- Input
-20004.72
1.39
-0.01
ChannelZ
+ Input
200037.49
-1.39
-0.00
ChannelZ
+ Input
20007.74
2.29
0.01
Channel Z
- Input
-20007.40
-1.18
0.01
Reading (µV)
Difference (µV)
Low Range
Error(%)
Channel X
+ Input
2001.09
-0.01
-0.00
ChannelX
+ Input
201.09
0.05
0.02
Channel X
- Input
-198.69
0.26
-0.13
Channel Y
+ Input
2000.84
-0.17
-0.01
Channel Y
+ Input
200.20
-0.73
-0.36
Channel Y
- Input
-200.34
-1.25
0.63
Channel Z
+ Input
2000.71
-0.11
-0.01
Channel Z
+ Input
199.32
-1.41
-0.70
ChannelZ
- Input
-200.63
-1.49
0.75
2. Common mode sensitivity
DASY measurement parameters: A uto Z ero T1me: 3 sec; Measunna time: 3 sec
Common mode
Input Voltage (mV)
ChannelX
ChannelY
ChannelZ
High Range
Average Reading (µV)
Low Range
Average Reading (µV)
200
-2.17
-4.31
-200
6.00
3.83
200
-14.14
-14.03
-200
13.56
12.87
200
2.59
2.79
- 200
-5.24
-5.55
3. Channel separation
DASY measurement parameters: Auto Zero Time: 3 sec; Measunnq time: 3 sec
Input Voltage (mV)
Channel X (µV)
Channel Y (µV)
Channel Z (µV)
ChannelX
200
-1.77
-2.83
ChannelY
200
8.18
0.21
ChannelZ
200
4.82
4.96
Certificate No: DAE3-577_Sep18
Page 4 of 5
4. AD-Converter Values with inputs shorted
DASY measurement parameters: Auto Zero Time: 3 sec; Measurina time: 3 sec
High Range (LSB)
Low Range (LSB)
Channel X
16134
16282
Channel Y
16103
16704
Channel Z
16112
15003
5. Input Offset Measurement
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
lnout 10MQ
Average (µV)
min. Offset (µV)
max. Offset (µV)
Std. Deviation
(uV)
ChannelX
0.90
-0.00
1.82
0.37
Channel Y
2.88
1.81
4.92
0.52
Channel Z
-1.31
-2.47
0.13
0.43
6. Input Offset Current
Nominal Input circuitry offset current on all channels: <25fA
7. lnnut Resistance
(Tvpical values for information)
Zeroing (kOhm)
Measuring (MOhm)
ChannelX
200
200
ChannelY
200
200
Channel Z
200
200
O tai:ie
8. Low Batterv Al arm VI
Typical values
(Typical values for information)
Alarm Level (VDC)
Supply(+ Vee)
+7.9
Supply (- Vee)
-7.6
9. Power Consumption
(Typical values for information)
Typical values
Switched off (mA)
Stand by (mA)
Transmitting (mA)
Supply(+ Vee)
+0.01
+6
+14
Supply (- Vee)
-0.01
-8
-9
Certificate No: DAE3-577_Sep18
Page 5 of 5
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Sporton
Certificate No:
DAE4-854_Jun18
CALIBRATION CERTIFICATE
Object
DAE4 - SD 000 004 BM - SN: 854
Calibration procedure(s)
QA CAL-06.v29
Calibration procedure for the data acquisition electronics (DAE)
Calibration date:
June 14, 2018
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
Keithley Multimeter Type 2001
I SN: 0810278
Cal Date (Certificate No.)
Scheduled Calibration
31-Aug-17 (No:21092)
Aug-18
Secondary Standards
ID#
Check Date (in house)
Scheduled Check
Auto DAE Calibration Unit
SE UWS 053 AA 1001
04-Jan-18 (in house check)
In house check: Jan-19
Calibrator Box V2.1
SE UMS 006 AA 1002
04-Jan-18 (in house check)
In house check: Jan-19
Name
Function
Calibrated by:
Eric Hainfeld
Laboratory Technician
Approved by:
Sven KOhn
Deputy Manager
Signature
4--~~
\ ,V
1l.L\,
\A,\Jt
Issued: June 14, 2018
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: DAE4-854_Jun18
Page 1 of 5
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Swiss Calibration Service
Accredited by the Swiss Accreditation Se Nice (SAS)
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary
DAE
Connector angle
data acquisition electronics
information used in DASY system to align probe sensor X to the robot
coordinate system.
Methods Applied and Interpretation of Parameters
•
DC Voltage Measurement: Calibration Factor assessed for use in DASY system by
comparison with a calibrated instrument traceable to national standards. The figure given
corresponds to the full scale range of the voltmeter in the respective range.
•
Connector angle: The angle of the connector is assessed measuring the angle
mechanically by a tool inserted. Uncertainty is not required.
•
The following parameters as documented in the Appendix contain technical information as a
result from the performance test and require no uncertainty.
•
DC Voltage Measurement Linearity: Verification of the Linearity at +10% and -10% of
the nominal calibration voltage. Influence of offset voltage is included in this
measurement.
•
Common mode sensitivity: Influence of a positive or negative common mode voltage on
the differential measurement.
•
Channel separation: Influence of a voltage on the neighbor channels not subject to an
input voltage.
•
AD Converter Values with inputs shorted: Values on the internal AD converte r
corresponding to zero input voltage
•
Input Offset Measurement Output voltage and statistical results over a large number of
zero voltage measurements.
•
Input Offset Current: Typical value for information; Maximum channel input offset
current, not considering the input resistance.
•
Input resistance: Typical value for information: DAE input resistance at the connector,
during internal auto-zeroing and during measurement.
•
Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery
alarm signal is generated.
•
Power consumption: Typical value for information. Supply currents in various operating
modes.
Certificate No: DAE4-854_Jun18
Page 2 of 5
DC Voltage Measurement
AID - Converter Resolution nominal
6.1µV,
full range= -100 ... +300 mV
High Range:
1LS8 =
61nV,
full range= -L ..... +3mV
Low Range:
1LS8 =
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
High Range
404.937 ± 0.02% (k=2)
405.829 ± 0.02% (k=2)
Low Range
3.97284 ± 1.50% (k=2)
± 0.02% (k=2)
3.94535 ± 1.50% (k=2)
Calibration Factors
404. 730
3.99553 ± 1 .50% (k=2)
Connector Angle
Connector Angle to be used in DASY system
Certificate No: DAE4-854_Jun18
325.0
Page 3 of 5
°±1 °
Appendix (Additional assessments outside the scope of SCS0108)
1. DC Voltaae Linearitv
High Range
Reading (µV)
Difference (µV)
Error(%)
Channel X
+ Input
200033.40
-4.54
-0.00
ChannelX
+ Input
20004.28
-1.77
-0.01
ChannelX
- Input
-20002.65
2.58
-0.01
Channel Y
+ Input
200036.32
-2.03
-0.00
Channel Y
+ Input
20002.05
-3.86
-0.02
ChannelY
- Input
-20005.10
0.28
-0.00
ChannelZ
+ Input
200036.91
-1.46
-0.00
ChannelZ
+ Input
20003.85
-2.05
-0.01
ChannelZ
- Input
-20005.17
0.36
-0.00
Reading (µV)
Difference (µV)
Low Range
Error{%)
ChannelX
+ Input
2002.16
0.22
0.01
ChannelX
+ Input
202.15
0.38
0.19
Channel X
- Input
-198.29
-0.31
0.16
Channel Y
+ Input
2001.95
0.27
0.01
ChannelY
+ Input
201.01
-0.63
-0.31
Channel Y
- Input
-198.91
-0.79
0.40
Channel Z
+ Input
2001.73
-0.08
-0.00
Channel Z
+ Input
200.57
-1.12
-0.56
ChannelZ
- Input
-199.68
-1.47
0.74
2. Common mode sensitivity
DASY measurement parameters: Auto Zero Time: 3 sec; Measunno time: 3 sec
Common mode
Input Voltage (mV)
ChannelX
Channel Y
ChannelZ
High Range
Average Reading (µV)
Low Range
Average Reading (µV)
200
-11.94
-13.63
-200
15.47
13.71
200
-8.45
-8.32
- 200
7.64
7.27
200
16.23
16.03
- 200
-18.86
-19.07
3. Channel separation
DASY measurement parameters: Auto Zero Time: 3 sec; Measurina time: 3 sec
Input Voltage (mV)
Channel X (µV)
Channel Y (µV)
Channel Z (µV)
Channel X
200
1.45
-3.45
Channel Y
200
7.54
3.39
ChannelZ
200
9.04
5.14
Certificate No: DAE4-854_Jun18
Page 4 of 5
4. AD-Converter Values with inputs shorted
DASY measurement parameters: Auto Zero Time: 3 sec; Measurina time: 3 sec
High Range (LSB)
Low Range (LSB)
Channel X
16138
16479
ChannelY
16030
14603
Channel Z
15846
16180
5. Input Offset Measurement
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
Input 10MQ
Average (µV)
min. Offset (µV)
max. Offset (µ V)
Std. Deviation
(µV)
ChannelX
0.51
-0.22
1.41
0.30
Channel Y
1.02
-0.44
1.87
0.35
Channel Z
0.62
-0.69
1.46
0.38
6. Input Offset Current .
Nominal Input circuitry offset current on all channels: <25fA
7. In out Resistance
(Tvoical values for information)
Zeroing (kOhm)
Measuring (MOhm)
ChannelX
200
200
Channel Y
200
200
Channel Z
200
200
8. Low Batterv Al arm VI
o taae
Typical values
(Typical values for information)
Alarm Level (VDC)
Supply(+ Vee)
+7.9
Supply(· Vee)
-7.6
9. Power Consumot1on
(Typical values for information)
Typical values
Switched off (mA)
Stand by (mA)
Transmitting (mA)
Supply(+ Vee)
+0.01
+6
+14
Supply (- Vee)
-O.Q1
-8
-9
Certificate No: DAE4-854_Jun18
Page 5 of 5

Download: 72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Mirror Download [FCC.gov]72473T GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC RF Exposure Info ._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1 Sony Mobile Communications Inc
Document ID4129424
Application IDBN63WYdPd+ENScEbwDj2Jg==
Document DescriptionRF Exposure Info._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize424.17kB (5302106 bits)
Date Submitted2019-01-03 00:00:00
Date Available2019-01-03 00:00:00
Creation Date2018-12-19 18:16:14
Producing SoftwareiText 2.1.7 by 1T3XT
Document Lastmod2018-12-19 18:18:43
Document TitleRF Exposure Info._20181219_v1 - PY7-72473T_TestRpt_RFExp_Appendix C_part 1
Document Creatorpdfsam-console (Ver. 2.4.3e)

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:12:19 18:16:14+08:00
Creator                         : pdfsam-console (Ver. 2.4.3e)
Modify Date                     : 2018:12:19 18:18:43+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Creator Tool                    : pdfsam-console (Ver. 2.4.3e)
Metadata Date                   : 2018:12:19 18:18:43+08:00
Producer                        : iText 2.1.7 by 1T3XT
Format                          : application/pdf
Document ID                     : uuid:d8e8eb32-51e6-4367-ad82-178510ff6d5e
Instance ID                     : uuid:b8bba48e-fb62-43d1-97f5-2d960cfe1071
Page Count                      : 74