60083010 8x8 802.11a/b/g/n/ac/ax Access Point Test Report Transmit Simultaneous Report Cisco Systems

Cisco Systems 8x8 802.11a/b/g/n/ac/ax Access Point

Alternate Views: PDF [Zoom] Download [PDF]

                     Supplemental “Transmit Simultaneously” Test Report

                       Report No.: RF180704E02-3

                            FCC ID: UDX-60083010

                       Test Model: MR55-HW

                 Received Date: July 05, 2018

                         Test Date: Aug. 29 to Sep. 06, 2018

                     Issued Date: Dec. 24, 2018


                         Applicant: Cisco Systems, Inc.

                          Address: 170 West Tasman Drive, San Jose, CA 95134 USA


                        Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
                                   Hsin Chu Laboratory
                    Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300,
                                 Taiwan R.O.C.
            Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300,
                           Taiwan R.O.C.
       FCC Registration /
                           723255 / TW2022
      Designation Number:




This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report
should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.


Report No.: RF180704E02-3                                            Page No. 1 / 31                                            Report Format Version: 6.1.1
Reference No.: 180704E02


                                                                   Table of Contents
Release Control Record .................................................................................................................................. 3
1         Certificate of Conformity ...................................................................................................................... 4
2         Summary of Test Results ..................................................................................................................... 5
    2.1      Measurement Uncertainty ................................................................................................................... 5
    2.2      Modification Record ............................................................................................................................ 5
3         General Information .............................................................................................................................. 6
    3.1      General Description of EUT ................................................................................................................ 6
    3.1.1    Test Mode Applicability and Tested Channel Detail ............................................................................ 11
    3.2      Description of Support Units ............................................................................................................. 13
    3.2.1    Configuration of System under Test .................................................................................................. 14
4         Test Types and Results ...................................................................................................................... 16
    4.1      Radiated Emission and Bandedge Measurement ............................................................................. 16
    4.1.1    Limits of Radiated Emission and Bandedge Measurement .............................................................. 16
    4.1.2    Test Instruments ................................................................................................................................ 17
    4.1.3    Test Procedures ................................................................................................................................. 18
    4.1.4    Deviation from Test Standard ............................................................................................................ 18
    4.1.5    Test Setup .......................................................................................................................................... 19
    4.1.6    EUT Operating Conditions................................................................................................................. 20
    4.1.7    Test Results ....................................................................................................................................... 21
    4.2      Conducted Emission Measurement .................................................................................................. 24
    4.2.1    Limits of Conducted Emission Measurement .................................................................................... 24
    4.2.2    Test Instruments ................................................................................................................................ 24
    4.2.3    Test Procedures ................................................................................................................................. 25
    4.2.4    Deviation from Test Standard ............................................................................................................ 25
    4.2.5    Test Setup .......................................................................................................................................... 25
    4.2.6    EUT Operating Conditions................................................................................................................. 25
    4.2.7    Test Results ....................................................................................................................................... 26
    4.3      Conducted Out of Band Emission Measurement .............................................................................. 28
    4.3.1    Limits of Conducted Out of Band Emission Measurement................................................................ 28
    4.3.2    Test Setup .......................................................................................................................................... 28
    4.3.3    Test Instruments ................................................................................................................................ 28
    4.3.4    Test Procedures ................................................................................................................................. 28
    4.3.5    Deviation from Test Standard ............................................................................................................ 28
    4.3.6    EUT Operating Conditions................................................................................................................. 28
    4.3.7    Test Results ....................................................................................................................................... 28
5         Pictures of Test Arrangements .......................................................................................................... 30
Appendix – Information on the Testing Laboratories ................................................................................ 31




Report No.: RF180704E02-3                                            Page No. 2 / 31                                             Report Format Version: 6.1.1
Reference No.: 180704E02


                                            Release Control Record


Issue No.                   Description                                     Date Issued
RF180704E02-3               Original release.                               Dec. 24, 2018




Report No.: RF180704E02-3                       Page No. 3 / 31      Report Format Version: 6.1.1
Reference No.: 180704E02


1    Certificate of Conformity


            Product: 8x8 802.11a/b/g/n/ac/ax Access Point

              Brand: Cisco

        Test Model: MR55-HW

    Sample Status: ENGINEERING SAMPLE

          Applicant: Cisco Systems, Inc.

          Test Date: Aug. 29 to Sep. 06, 2018

         Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247)
                        47 CFR FCC Part 15, Subpart E (Section 15.407)
                        ANSI C63.10: 2013



The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s EMC characteristics under the conditions specified in this report.




      Prepared by :                                             ,   Date:       Dec. 24, 2018
                             Phoenix Huang / Specialist




     Approved by :                                              ,   Date:       Dec. 24, 2018
                                 May Chen / Manager




Report No.: RF180704E02-3                     Page No. 4 / 31                        Report Format Version: 6.1.1
Reference No.: 180704E02


2      Summary of Test Results


                             47 CFR FCC Part 15, Subpart C, E (SECTION 15.247, 15.407)

           FCC
                                        Test Item                Result                   Remarks
          Clause

          15.207                                                            Meet the requirement of limit.
                                AC Power Conducted
                                                                 PASS       Minimum passing margin is -5.10dB at
      15.407(b)(6)                   Emission
                                                                            28.68359MHz.
    15.205 / 15.209 /
        15.247(d)            Radiated Emissions and Band                    Meet the requirement of limit.
                                  Edge Measurement               PASS       Minimum passing margin is -3.6dB at
        15.407(b)                                                           17475.00MHz.
      (1/2/3/4(i/ii)/6)



2.1      Measurement Uncertainty
Where relevant, the following measurement uncertainty levels have been estimated for tests performed on
the EUT as specified in CISPR 16-4-2:


                                                                                          Expanded Uncertainty
                          Measurement                                 Frequency
                                                                                               (k=2) (±)
          Conducted Emissions at mains ports                     150kHz ~ 30MHz                 1.84 dB
           Radiated Emissions up to 1 GHz                        30MHz ~ 1GHz                   5.53 dB
                                                                  1GHz ~ 6GHz                   5.08 dB
           Radiated Emissions above 1 GHz                        6GHz ~ 18GHz                   4.98 dB
                                                                 18GHz ~ 40GHz                  5.19 dB



2.2      Modification Record
There were no modifications required for compliance.




Report No.: RF180704E02-3                           Page No. 5 / 31                         Report Format Version: 6.1.1
Reference No.: 180704E02


3     General Information
3.1    General Description of EUT
 Product                    8x8 802.11a/b/g/n/ac/ax Access Point
 Brand                      Cisco
 Test Model                 MR55-HW
 Status of EUT              ENGINEERING SAMPLE
                            12Vdc from power adapter or
 Power Supply Rating
                            55Vdc from PoE
                            WLAN:
                            CCK, DQPSK, DBPSK for DSSS
                            64QAM, 16QAM, QPSK, BPSK for OFDM
 Modulation Type            256QAM for OFDM in 11ac mode and VHT (20/40) mode in 2.4GHz
                            1024QAM for OFDMA in 11ax HE mode
                            BT-LE: GFSK
                            WLAN: DSSS, OFDM, OFDMA
 Modulation Technology      BT-LE: DTS
                            WLAN:
                            802.11b: up to 11Mbps
                            802.11a/g: up to 54Mbps
 Transfer Rate              802.11n: up to 600Mbps
                            802.11ac: up to 3466.7Mbps
                            802.11ax: up to 4803.9Mbps
                            BT-LE: Up to 1Mbps
                            WLAN:
                            2.4GHz: 2.412 ~ 2.462GHz
 Operating Frequency        5GHz: 5.18~ 5.24GHz, 5.745 ~ 5.825GHz
                            BT-LE: 2.402 ~ 2.480GHz
                            WLAN:
                            2.4GHz:
                            802.11b, 802.11g, 802.11n (HT20), VHT20, 802.11ax (HE20): 11
                            802.11n (HT40),VHT40, 802.11ax (HE40): 7
                            5GHz:
 Number of Channel
                            802.11a, 802.11n (HT20), 802.11ac (VHT20), 802.11ax (HE20): 9
                            802.11n (HT40), 802.11ac (VHT40), 802.11ax (HE40): 4
                            802.11ac (VHT80), 802.11ax (HE80): 2
                            802.11ac (VHT80+80), 802.11ax (HE80+80): 1 set
                            BT-LE: 40
 Antenna Type               Refer to Note
 Antenna Connector          Refer to Note
 Accessory Device           Adapter x 1 (option)
 Data Cable Supplied        NA




Report No.: RF180704E02-3                   Page No. 6 / 31                     Report Format Version: 6.1.1
Reference No.: 180704E02


Note:
1. The EUT has below radios as following table:
        Radio 1                Radio 2                        Radio 3                       Radio 4
    WLAN (2.4GHz)          WLAN (5GHz)            2.4GHz / 5GHz Scanning (only RX)         Bluetooth
2. Simultaneously transmission condition.
     Condition                                             Technology
         1                WLAN (2.4GHz)                   WLAN (5GHz)                 Bluetooth
3. The EUT must be supplied with a power adapter or POE as following table:
Adapter (Option)
 No. Brand                  Model No.                  Spec.
                                                       Input: 100-240Vac, 0.8A, 50/60Hz
   1 UMEC                   MA-PWR-30W-US              Output: 12Vdc, 2.5A
                                                       DC Output cable: Unshielded, 1.4m
                                                       Input: 100-240Vac, 1.0A, 50/60Hz
   2 Ktec                   KSAS0361200250HU           Output: 12Vdc, 2.5A
                                                       DC Output cable: Unshielded, 1.8m
POE (Only for test not for sale)
 No. Brand                  Model No.                  Spec.
                                                       Input: 100-240Vac, 1.5A, 50-60Hz
   1 CISCO                  MA-INJ-5
                                                       Output: 55Vdc, 0.63A
                                                       Input: 100-240Vac, 0.67A, 50/60Hz
   2 CISCO                  MA-INJ-4
                                                       Output: 55Vdc, 0.6A
Note:
1. From the above conditions, the conducted emissions worse case was found in POE No. 2.
   Therefore only the test data of the mode was recorded in this report.
2. From the above conditions, the radiated emissions worse case was found in Adapter No. 2.
   Therefore only the test data of the mode was recorded in this report.
4. The antennas provided to the EUT, please refer to the following table:
                                   WLAN Directional gain table – 8TX
                            Directional Antenna Gain
  Frequency range (GHz)                                        Antenna Type        Antenna Connector
                                      (dBi)
        5.15 ~ 5.25                   9.29
                                                                   PIFA                i-pex(MHF)
       5.725 ~ 5.85                     9.2
                                   WLAN Directional gain table – 4TX
Frequency range                                           Directional                          Antenna
                         Antenna Combine Type                            Antenna Type
     (GHz)                                            Antenna Gain (dBi)                      Connector
  2.4 ~ 2.4835       Dual_1+Dual_2+Dual_3+Dual_4              5.43
   5.15 ~ 5.25                                               10.73           PIFA             i-pex(MHF)
                  Single_1+Single_2+Single_3+Single_4
  5.725 ~ 5.85                                               10.68




Report No.: RF180704E02-3                    Page No. 7 / 31                      Report Format Version: 6.1.1
Reference No.: 180704E02


                                       WLAN Directional gain table – 2TX
  Frequency range           Antenna Combine Directional Antenna
                                                                      Antenna Type      Antenna Connector
       (GHz)                      Type            Gain (dBi)
    2.4 ~ 2.4835             Dual_1+Dual_3          6.33
     5.15 ~ 5.25                                       8.47               PIFA              i-pex(MHF)
                             Dual_2+Dual_3
     5.725 ~ 5.85                                      8.59
                                             Bluetooth antenna spec.
     Antenna Net Gain                Frequency range
                                                                Antenna Type         Antenna Connector
           (dBi)                           (GHz)
           3.61                         2.4~2.4835                   PIFA                 i-pex(MHF)
Note: More detailed information, please refer to operating description.
5. The EUT incorporates a MIMO function.
                                                 2.4GHz Band
MODULATION MODE                DATA RATE (MCS)                      TX & RX CONFIGURATION
    802.11b                       1 ~ 11Mbps                      4TX                   4RX
    802.11g                       6 ~ 54Mbps                      4TX                   4RX
                                   MCS 0~7                        4TX                   4RX
                                  MCS 8~15                        4TX                   4RX
    802.11n (HT20)
                                  MCS 16~23                       4TX                   4RX
                                  MCS 24~31                       4TX                   4RX
                                   MCS 0~7                        4TX                   4RX
                                  MCS 8~15                        4TX                   4RX
    802.11n (HT40)
                                  MCS 16~23                       4TX                   4RX
                                  MCS 24~31                       4TX                   4RX
                                MCS 0~8, Nss=1                    4TX                   4RX
                                MCS 0~8, Nss=2                    4TX                   4RX
         VHT20
                                MCS 0~9, Nss=3                    4TX                   4RX
                                MCS 0~8, Nss=4                    4TX                   4RX
                                MCS 0~9, Nss=1                    4TX                   4RX
                                MCS 0~9, Nss=2                    4TX                   4RX
         VHT40
                                MCS 0~9, Nss=3                    4TX                   4RX
                                MCS 0~9, Nss=4                    4TX                   4RX
                               MCS 0~11, Nss=1                    4TX                   4RX
                               MCS 0~11, Nss=2                    4TX                   4RX
   802.11ax (HE20)
                               MCS 0~11, Nss=3                    4TX                   4RX
                               MCS 0~11, Nss=4                    4TX                   4RX
                               MCS 0~11, Nss=1                    4TX                   4RX
                               MCS 0~11, Nss=2                    4TX                   4RX
   802.11ax (HE40)
                               MCS 0~11, Nss=3                    4TX                   4RX
                               MCS 0~11, Nss=4                    4TX                   4RX
                                                  5GHz Band
MODULATION MODE                DATA RATE (MCS)                      TX & RX CONFIGURATION
    802.11a                       6 ~ 54Mbps                      8TX                   8RX
                                   MCS 0~7                        8TX                   8RX
                                  MCS 8~15                        8TX                   8RX
    802.11n (HT20)
                                  MCS 16~23                       8TX                   8RX
                                  MCS 24~31                       8TX                   8RX
                                   MCS 0~7                        8TX                   8RX
                                  MCS 8~15                        8TX                   8RX
    802.11n (HT40)
                                  MCS 16~23                       8TX                   8RX
                                  MCS 24~31                       8TX                   8RX




Report No.: RF180704E02-3                       Page No. 8 / 31                      Report Format Version: 6.1.1
Reference No.: 180704E02


                            MCS 0~8, Nss=1                       8TX            8RX
                            MCS 0~8, Nss=2                       8TX            8RX
                            MCS 0~9, Nss=3                       8TX            8RX
                            MCS 0~8, Nss=4                       8TX            8RX
  802.11ac (VHT20)
                            MCS 0~8, Nss=5                       8TX            8RX
                            MCS 0~9, Nss=6                       8TX            8RX
                            MCS 0~8, Nss=7                       8TX            8RX
                            MCS 0~8, Nss=8                       8TX            8RX
                            MCS 0~9, Nss=1                       8TX            8RX
                            MCS 0~9, Nss=2                       8TX            8RX
                            MCS 0~9, Nss=3                       8TX            8RX
                            MCS 0~9, Nss=4                       8TX            8RX
  802.11ac (VHT40)
                            MCS 0~9, Nss=5                       8TX            8RX
                            MCS 0~9, Nss=6                       8TX            8RX
                            MCS 0~9, Nss=7                       8TX            8RX
                            MCS 0~9, Nss=8                       8TX            8RX
                            MCS 0~9, Nss=1                       8TX            8RX
                            MCS 0~9, Nss=2                       8TX            8RX
                            MCS 0~9, Nss=3                       8TX            8RX
                            MCS 0~9, Nss=4                       8TX            8RX
  802.11ac (VHT80)
                            MCS 0~9, Nss=5                       8TX            8RX
                            MCS 0~8, Nss=6                       8TX            8RX
                            MCS 0~9, Nss=7                       8TX            8RX
                            MCS 0~9, Nss=8                       8TX            8RX
                            MCS 0~9, Nss=1                     4TX+4TX       4RX +4RX
      802.11ac              MCS 0~9, Nss=2                     4TX+4TX       4RX +4RX
   (VHT80+VHT80)            MCS 0~9, Nss=3                     4TX+4TX       4RX +4RX
                            MCS 0~9, Nss=4                     4TX+4TX       4RX +4RX
                            MCS 0~11, Nss=1                      8TX           8RX
                            MCS 0~11, Nss=2                      8TX           8RX
                            MCS 0~11, Nss=3                      8TX           8RX
                            MCS 0~11, Nss=4                      8TX           8RX
   802.11ax (HE20)
                            MCS 0~11, Nss=5                      8TX           8RX
                            MCS 0~11, Nss=6                      8TX           8RX
                            MCS 0~11, Nss=7                      8TX           8RX
                            MCS 0~11, Nss=8                      8TX           8RX
                            MCS 0~11, Nss=1                      8TX           8RX
                            MCS 0~11, Nss=2                      8TX           8RX
                            MCS 0~11, Nss=3                      8TX           8RX
                            MCS 0~11, Nss=4                      8TX           8RX
   802.11ax (HE40)
                            MCS 0~11, Nss=5                      8TX           8RX
                            MCS 0~11, Nss=6                      8TX           8RX
                            MCS 0~11, Nss=7                      8TX           8RX
                            MCS 0~11, Nss=8                      8TX           8RX
                            MCS 0~11, Nss=1                      8TX           8RX
                            MCS 0~11, Nss=2                      8TX           8RX
                            MCS 0~11, Nss=3                      8TX           8RX
                            MCS 0~11, Nss=4                      8TX           8RX
   802.11ax (HE80)
                            MCS 0~11, Nss=5                      8TX           8RX
                            MCS 0~11, Nss=6                      8TX           8RX
                            MCS 0~11, Nss=7                      8TX           8RX
                            MCS 0~11, Nss=8                      8TX           8RX




Report No.: RF180704E02-3                    Page No. 9 / 31             Report Format Version: 6.1.1
Reference No.: 180704E02


                            MCS 0~11, Nss=1                     4TX+4TX                4RX +4RX
       802.11ax            MCS 0~11, Nss=2                4TX+4TX                     4RX +4RX
     (HE80+HE80)           MCS 0~11, Nss=3                4TX+4TX                     4RX +4RX
                           MCS 0~11, Nss=4                4TX+4TX                     4RX +4RX
Note: All of modulation mode support beamforming function except 802.11a/b/g modulation mode.
                                           2.4GHz Scanning
MODULATION MODE                                      RX CONFIGURATION
        802.11b                                               1RX
        802.11g                                               1RX
   802.11n (HT20)                                             1RX
   802.11n (HT40)                                             1RX
         VHT20                                                1RX
         VHT40                                                1RX
                                            5GHz Scanning
MODULATION MODE                                      RX CONFIGURATION
        802.11a                                               1RX
   802.11n (HT20)                                             1RX
   802.11n (HT40)                                             1RX
  802.11ac (VHT20)                                            1RX
  802.11ac (VHT40)                                            1RX
  802.11ac (VHT80)                                            1RX
6. The above EUT information is declared by manufacturer and for more detailed features description,
   please refer to the manufacturer's specifications or user's manual.




Report No.: RF180704E02-3                    Page No. 10 / 31                      Report Format Version: 6.1.1
Reference No.: 180704E02


3.1.1       Test Mode Applicability and Tested Channel Detail

    EUT                                  APPLICABLE TO
 CONFIGURE                                                                                        DESCRIPTION
   MODE               RE1G           RE<1G             PLC              OB

                                                                                            5GHz (8TX)/ 2.4GHz (4TX)
        -               √                √               √                √
                                                                                        (PLC: POE mode; RE: adapter mode)
           RE1G: Radiated Emission above 1GHz &
Where                                                      RE<1G: Radiated Emission below 1GHz
           Bandedge Measurement
           PLC: Power Line Conducted Emission              OB: Conducted Out-Band Emission Measurement
Note: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane (below
       1GHz) & Z-plane (above 1GHz).


Radiated Emission Test (Above 1GHz):

   Following channel(s) was (were) selected for the final test as listed below.
                                                   Non-Beamforming Mode
                                   AVAILABLE                                         MODULATION
            MODE                                        TESTED CHANNEL                                      MODULATION TYPE
                                    CHANNEL                                          TECHNOLOGY

            802.11b                   1 to 11                     6                      DSSS                    DBPSK
              +
                                     36 to 48
            802.11a                                             165                     OFDM                      BPSK
                                    149 to 165
              +
            BT-LE                     0 to 39                     0                        -                      GFSK



Radiated Emission Test (Below 1GHz):

   Following channel(s) was (were) selected for the final test as listed below.
                                                   Non-Beamforming Mode
                                   AVAILABLE                                         MODULATION
            MODE                                        TESTED CHANNEL                                      MODULATION TYPE
                                    CHANNEL                                          TECHNOLOGY

            802.11b                   1 to 11                     6                      DSSS                    DBPSK
              +
                                     36 to 48
            802.11a                                             165                     OFDM                      BPSK
                                    149 to 165
              +
            BT-LE                     0 to 39                     0                        -                      GFSK



Power Line Conducted Emission Test:

   Following channel(s) was (were) selected for the final test as listed below.
                                                   Non-Beamforming Mode
                                   AVAILABLE                                         MODULATION
            MODE                                        TESTED CHANNEL                                      MODULATION TYPE
                                    CHANNEL                                          TECHNOLOGY

            802.11b                   1 to 11                     6                      DSSS                    DBPSK
              +
                                     36 to 48
            802.11a                                             165                     OFDM                      BPSK
                                    149 to 165
              +
            BT-LE                     0 to 39                     0                        -                      GFSK




Report No.: RF180704E02-3                             Page No. 11 / 31                               Report Format Version: 6.1.1
Reference No.: 180704E02


Conducted Out-Band Emission Measurement:

   Following channel(s) was (were) selected for the final test as listed below.
                                             Non-Beamforming Mode
                              AVAILABLE                                   MODULATION
         MODE                                    TESTED CHANNEL                               MODULATION TYPE
                               CHANNEL                                    TECHNOLOGY

         802.11b                 1 to 11                  6                  DSSS                  DBPSK
            +
                                36 to 48
         802.11a                                         165                 OFDM                   BPSK
                               149 to 165


Test Condition:
   APPLICABLE TO            ENVIRONMENTAL CONDITIONS                  INPUT POWER               TESTED BY
        RE1G                      23deg. C, 65%RH                     120Vac, 60Hz              Weiwei Lo
       RE<1G                       22deg. C, 68%RH                     120Vac, 60Hz            Frank Chuang
         PLC                       25deg. C, 75%RH                     120Vac, 60Hz            Frank Chuang
         OB                        25deg. C, 60%RH                     120Vac, 60Hz            Jyunchun Lin




Report No.: RF180704E02-3                      Page No. 12 / 31                        Report Format Version: 6.1.1
Reference No.: 180704E02


3.2      Description of Support Units

The EUT has been tested as an independent unit together with other necessary accessories or support units.
The following support units or accessories were used to form a representative test configuration during the
tests.

 ID          Product             Brand           Model No.             Serial No.             FCC ID              Remarks
 A.           Laptop             DELL              E6420               B92T3R1               FCC DoC          Provided by Lab
 B.       POE Adapter            CISCO           MA-INJ-4                 NA                       NA         Supplied by client
Note:
1. All power cords of the above support units are non-shielded (1.8m).


                                                                      Shielding
 ID           Descriptions                Qty.        Length (m)                    Cores (Qty.)            Remarks
                                                                      (Yes/No)
 1.           RJ-45 Cable                  1               10             No             0               Provided by Lab
 2.             DC Cable                   1               1.8            No             0              Supplied by client
 3.           RJ-45 Cable                  1               0.5            No             0               Provided by Lab
Note: The core(s) is(are) originally attached to the cable(s).




Report No.: RF180704E02-3                                    Page No. 13 / 31                           Report Format Version: 6.1.1
Reference No.: 180704E02


3.2.1 Configuration of System under Test
POE mode:




Report No.: RF180704E02-3                  Page No. 14 / 31   Report Format Version: 6.1.1
Reference No.: 180704E02


Adapter mode:




Report No.: RF180704E02-3   Page No. 15 / 31   Report Format Version: 6.1.1
Reference No.: 180704E02


4        Test Types and Results
4.1      Radiated Emission and Bandedge Measurement
4.1.1     Limits of Radiated Emission and Bandedge Measurement

Radiated emissions which fall in the restricted bands must comply with the radiated emission limits
specified as below table.

              Frequencies                            Field Strength                       Measurement Distance
                 (MHz)                              (microvolts/meter)                           (meters)

             0.009 ~ 0.490                            2400/F(kHz)                                     300

             0.490 ~ 1.705                            24000/F(kHz)                                    30
              1.705 ~ 30.0                                  30                                        30
                 30 ~ 88                                   100                                        3
                88 ~ 216                                   150                                        3
               216 ~ 960                                   200                                        3
               Above 960                                   500                                        3
Note:
1.       The lower limit shall apply at the transition frequencies.
2.       Emission level (dBuV/m) = 20 log Emission level (uV/m).
3.       For frequencies above 1000MHz, the field strength limits are based on average detector, however, the
         peak field strength of any emission shall not exceed the maximum permitted average limits, specified
         above by more than 20dB under any condition of modulation.
Limits of unwanted emission out of the restricted bands
                   Applicable To                                                      Limit

     789033 D02 General UNII Test Procedure                                    Field Strength at 3m
               New Rules v02r01                              PK:74 (dBµV/m)                     AV:54 (dBµV/m)
                                                                                          Equivalent Field Strength at
      Frequency Band           Applicable To                      EIRP Limit
                                                                                                      3m
      5150~5250 MHz            15.407(b)(1)
      5250~5350 MHz            15.407(b)(2)                PK:-27 (dBm/MHz)                    PK:68.2(dBµV/m)
      5470~5725 MHz            15.407(b)(3)
                                                         PK:-27 (dBm/MHz) *1                  PK: 68.2(dBµV/m) *1
                                                          PK:10 (dBm/MHz) *2                  PK:105.2 (dBµV/m) *2
                                 15.407(b)(4)(i)
      5725~5850 MHz                                      PK:15.6 (dBm/MHz) *3                 PK: 110.8(dBµV/m) *3
                                                          PK:27 (dBm/MHz) *4                  PK:122.2 (dBµV/m) *4
                                 15.407(b)(4)(ii)                     Emission limits in section 15.247(d)
                                                                 *2 below the band edge increasing linearly to 10
 *1   beyond 75 MHz or more above of the band edge.
                                                                    dBm/MHz at 25 MHz above.
 *3   below the band edge increasing linearly to a level         *4 from 5 MHz above or below the band edge

      of 15.6 dBm/MHz at 5 MHz above.                               increasing linearly to a level of 27 dBm/MHz at
                                                                    the band edge.
Note:
The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength:

        1000000 30 P
E=                          µV/m, where P is the eirp (Watts).
              3


Report No.: RF180704E02-3                           Page No. 16 / 31                            Report Format Version: 6.1.1
Reference No.: 180704E02


4.1.2 Test Instruments
DESCRIPTION &                                                                 CALIBRATED        CALIBRATED
                                  MODEL NO.                   SERIAL NO.
MANUFACTURER                                                                  DATE              UNTIL
Test Receiver
                                  N9038A                      MY50010156      July 12, 2018     July 11, 2019
Agilent
Pre-Amplifier
                                  EMC001340                   980142          Feb. 09, 2018     Feb. 08, 2019
EMCI
Loop Antenna(*)
                                  EM-6879                     264             Dec. 16, 2016     Dec. 15, 2018
Electro-Metrics
RF Cable                          NA                          LOOPCAB-001     Jan. 15, 2018     Jan. 14, 2019
RF Cable                          NA                          LOOPCAB-002     Jan. 15, 2018     Jan. 14, 2019
Pre-Amplifier
                                  ZFL-1000VH2B                AMP-ZFL-05      May 05, 2018      May 04, 2019
Mini-Circuits
Trilog Broadband Antenna
                                  VULB 9168                   9168-361        Nov. 29, 2017     Nov. 28, 2018
SCHWARZBECK
RF Cable                          8D                          966-3-1         Mar. 20, 2018     Mar. 19, 2019
RF Cable                          8D                          966-3-2         Mar. 20, 2018     Mar. 19, 2019
RF Cable                          8D                          966-3-3         Mar. 20, 2018     Mar. 19, 2019
Fixed attenuator
                                  UNAT-5+                     PAD-3m-3-01     Oct. 03, 2017     Oct. 02, 2018
Mini-Circuits
Horn_Antenna
                                  BBHA9120-D                  9120D-406       Dec. 12, 2017     Dec. 11, 2018
SCHWARZBECK
Pre-Amplifier
                                  EMC12630SE                  980384          Jan. 29, 2018     Jan. 28, 2019
EMCI
RF Cable                          EMC104-SM-SM-1200           160922          Jan. 29, 2018     Jan. 28, 2019
RF Cable                          EMC104-SM-SM-2000           150317          Jan. 29, 2018     Jan. 28, 2019
RF Cable                          EMC104-SM-SM-5000           150322          Jan. 29, 2018     Jan. 28, 2019
Spectrum Analyzer
                                  N9030A                      MY54490679      July 23, 2018     July 22, 2019
Keysight
Pre-Amplifier
                                  EMC184045SE                 980386          Jan. 29, 2018     Jan. 28, 2019
EMCI
Horn_Antenna
                                  BBHA 9170                   BBHA9170608 Dec. 14, 2017         Dec. 13, 2018
SCHWARZBECK
RF Cable                          EMC102-KM-KM-1200           160924          Jan. 29, 2018     Jan. 28, 2019
Attenuator
                                  STI02-3310-10               013             Feb. 12, 2018     Feb. 11, 2019
STI
Software                          ADT_Radiated_V8.7.08 NA                     NA                NA
Antenna Tower & Turn Table
                                  MF-7802                     MF780208406     NA                NA
Max-Full
Boresight Antenna Fixture         FBA-01                      FBA-SIP01       NA                NA
Spectrum Analyzer
                                  FSV40                      100964          June 20, 2018     June 19, 2019
R&S

Note: Rad (below 1G: 180830; above 1G: 180906)/Power 180902
1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to
   NML/ROC and NIST/USA.
2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to
   NML/ROC and NIST/USA.
3. The test was performed in 966 Chamber No. 3.
4. The CANADA Site Registration No. is 20331-1
5. Loop antenna was used for all emissions below 30 MHz.
6. Tested Date: Aug. 30 to Sep. 06, 2018




Report No.: RF180704E02-3                      Page No. 17 / 31                        Report Format Version: 6.1.1
Reference No.: 180704E02


4.1.3      Test Procedures

For Radiated emission below 30MHz
 a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber
        room. The table was rotated 360 degrees to determine the position of the highest radiation.

     b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top
        of a variable-height antenna tower.

     c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the
        measurement.

     d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned
        from 0 degrees to 360 degrees to find the maximum reading.

     e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with
        Maximum Hold Mode.
Note:
     1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency
        below 30MHz.

For Radiated emission above 30MHz
a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above
    1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to
    determine the position of the highest radiation.
b.      The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top
        of a variable-height antenna tower.
c.      The height of antenna is varied from one meter to four meters above the ground to determine the
        maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to
        make the measurement.
d.      For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned
        to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to
        find the maximum reading.
e.      The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum
        hold mode when the test frequency is below 1 GHz.
f.      The test-receiver system was set to peak and average detect function and specified bandwidth with
        maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets
        average limit, measurement with the average detector is unnecessary.


Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for
    Quasi-peak detection (QP) at frequency below 1GHz.
2.      The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz
        for Peak detection (PK) at frequency above 1GHz.
3.      The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T
        (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz.
4.      All modes of operation were investigated and the worst-case emissions are reported.


4.1.4      Deviation from Test Standard

     No deviation.

Report No.: RF180704E02-3                         Page No. 18 / 31                        Report Format Version: 6.1.1
Reference No.: 180704E02


4.1.5   Test Setup

 For Radiated emission below 30MHz


                                                                     1m
            EUT&                        3m
            Support Units

                              Turn Table

               80cm


                                     Ground Plane
                                     Test Receiver




  For Radiated emission 30MHz to 1GHz

                                                        Ant. Tower
                                                                      1-4m
                                                                      Variable
                                           3m
                                            10m
              EUT&
              Support Units

                                  Turn Table

                  80cm


                                        Ground Plane

                                        Test Receiver




Report No.: RF180704E02-3                Page No. 19 / 31                 Report Format Version: 6.1.1
Reference No.: 180704E02


  For Radiated emission above 1GHz



                                                             Ant. Tower            1-4m
                                                                                   Variable
            EUT&                              3m
            Support Units

                                    Turn Table
                                                   Absorber

               150cm


                                           Ground Plane
                                           Test Receiver




 For the actual test configuration, please refer to the attached file (Test Setup Photo).



4.1.6   EUT Operating Conditions

a. Connected the EUT with the Laptop which is placed on remote site.
b. Controlling software (QSPR (5.0-00161)) has been activated to set the EUT on specific status.




Report No.: RF180704E02-3                       Page No. 20 / 31                            Report Format Version: 6.1.1
Reference No.: 180704E02


4.1.7    Test Results
Above 1GHz Data

                                                    DETECTOR                 Peak (PK)
FREQUENCY RANGE             1GHz ~ 40GHz
                                                    FUNCTION                 Average (AV)


                   ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
                   EMISSION                            ANTENNA     TABLE        RAW          CORRECTION
         FREQ.                   LIMIT     MARGIN
NO.                 LEVEL                               HEIGHT     ANGLE       VALUE           FACTOR
         (MHz)                 (dBuV/m)     (dB)
                   (dBuV/m)                               (m)     (Degree)     (dBuV)           (dB/m)
  1      4804.00     43.2 PK     74.0       -30.8        1.95 H     294          41.6              1.6
  2      4804.00     31.2 AV     54.0       -22.8        1.95 H     294          29.6              1.6
  3      4874.00     52.1 PK     74.0       -21.9        1.71 H     84           50.5              1.6
  4      4874.00     49.5 AV     54.0        -4.5        1.71 H     84           47.9              1.6
  5      7311.00     48.9 PK     74.0       -25.1        1.62 H     270          41.2              7.7
  6      7311.00     41.3 AV     54.0       -12.7        1.62 H     270          33.6              7.7
  7     11650.00     52.2 PK     74.0       -21.8        2.38 H     220          39.8             12.4
  8     11650.00     44.8 AV     54.0        -9.2        2.38 H     220          32.4             12.4
  9     17475.00     64.6 PK     68.2        -3.6        1.55 H     301          47.2             17.4
                    ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
                   EMISSION                            ANTENNA     TABLE        RAW          CORRECTION
         FREQ.                   LIMIT     MARGIN
NO.                 LEVEL                               HEIGHT     ANGLE       VALUE           FACTOR
         (MHz)                 (dBuV/m)     (dB)
                   (dBuV/m)                               (m)     (Degree)     (dBuV)           (dB/m)
  1      4804.00     39.2 PK     74.0       -34.8        1.61 V     17           37.6              1.6
  2      4804.00     28.3 AV     54.0       -25.7        1.61 V     17           26.7              1.6
  3      4874.00     50.9 PK     74.0       -23.1        1.57 V      11          49.3              1.6
  4      4874.00     47.5 AV     54.0        -6.5        1.57 V      11          45.9              1.6
  5      7311.00     48.5 PK     74.0       -25.5        1.56 V     317          40.8              7.7
  6      7311.00     40.6 AV     54.0       -13.4        1.56 V     317          32.9              7.7
  7     11650.00     52.0 PK     74.0       -22.0        1.58 V     266          39.6             12.4
  8     11650.00     45.0 AV     54.0        -9.0        1.58 V     266          32.6             12.4
  9     17475.00     56.2 PK     68.2       -12.0        1.72 V     305          38.8             17.4
REMARKS:
   1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
   2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
   3. The other emission levels were very low against the limit.
   4. Margin value = Emission Level – Limit value




Report No.: RF180704E02-3                    Page No. 21 / 31                           Report Format Version: 6.1.1
Reference No.: 180704E02


Below 1GHz Data:
                                                    DETECTOR
FREQUENCY RANGE             9kHz ~ 1GHz                                       Quasi-Peak (QP)
                                                    FUNCTION

                  ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
                   EMISSION                            ANTENNA      TABLE        RAW         CORRECTION
        FREQ.                    LIMIT    MARGIN
NO.                 LEVEL                               HEIGHT      ANGLE       VALUE          FACTOR
        (MHz)                  (dBuV/m)    (dB)
                   (dBuV/m)                               (m)      (Degree)     (dBuV)          (dB/m)
  1      99.56       32.6 QP     43.5       -10.9        1.00 H      250         45.0            -12.4
  2     149.68       34.2 QP     43.5        -9.3        1.50 H       3          41.7             -7.5
  3     220.68       34.8 QP     46.0       -11.2        1.50 H      207         45.6            -10.8
  4     274.20       30.4 QP     46.0       -15.6        1.50 H      80          38.3             -7.9
  5     460.37       30.6 QP     46.0       -15.4        1.50 H      300         33.3             -2.7
  6     629.15       31.4 QP     46.0       -14.6        1.50 H      60          30.4              1.0
REMARKS:
   1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
   2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
   3. Margin value = Emission Level – Limit value
   4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of
      spurious emissions attenuated more than 20 dB below the permissible value to be report.




Report No.: RF180704E02-3                    Page No. 22 / 31                           Report Format Version: 6.1.1
Reference No.: 180704E02


                                                    DETECTOR
FREQUENCY RANGE             9kHz ~ 1GHz                                       Quasi-Peak (QP)
                                                    FUNCTION

                    ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
                   EMISSION                            ANTENNA      TABLE        RAW         CORRECTION
        FREQ.                    LIMIT    MARGIN
NO.                 LEVEL                               HEIGHT      ANGLE       VALUE          FACTOR
        (MHz)                  (dBuV/m)    (dB)
                   (dBuV/m)                               (m)      (Degree)     (dBuV)          (dB/m)
  1     116.16       31.9 QP     43.5       -11.6        1.50 V      210         41.8             -9.9
  2     158.97       31.0 QP     43.5       -12.5        1.50 V      52          38.7             -7.7
  3     215.95       27.1 QP     43.5       -16.4        1.00 V      132         37.9            -10.8
  4     306.15       28.6 QP     46.0       -17.4        1.00 V      106         35.3             -6.7
  5     470.58       28.5 QP     46.0       -17.5        1.50 V      300         31.1             -2.6
  6     615.51       32.3 QP     46.0       -13.7        1.50 V      198         31.7              0.6
REMARKS:
   1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
   2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
   3. Margin value = Emission Level – Limit value
   4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of
      spurious emissions attenuated more than 20 dB below the permissible value to be report.




Report No.: RF180704E02-3                    Page No. 23 / 31                           Report Format Version: 6.1.1
Reference No.: 180704E02


4.2     Conducted Emission Measurement
4.2.1     Limits of Conducted Emission Measurement

                                                            Conducted Limit (dBuV)
        Frequency (MHz)
                                                Quasi-peak                              Average
          0.15 - 0.5                              66 - 56                                56 - 46
          0.50 - 5.0                                 56                                     46
          5.0 - 30.0                                 60                                     50
Note: 1. The lower limit shall apply at the transition frequencies.
      2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz.


4.2.2     Test Instruments

      DESCRIPTION &                                                  CALIBRATED          CALIBRATED
                              MODEL NO.           SERIAL NO.
       MANUFACTURER                                                  DATE                UNTIL
      Test Receiver
                              ESCS 30            847124/029          Nov. 01, 2017      Oct. 31, 2018
      R&S
      Line-Impedance
      Stabilization Network
                              ESH3-Z5             848773/004         Nov. 15, 2017      Nov. 14, 2018
      (for EUT)
      R&S
      Line-Impedance
      Stabilization Network
                              ENV216             100072              June 04, 2018      June 03, 2019
      (for Peripheral)
      R&S
      50 ohms Terminator      N/A                EMC-02              Sep. 22, 2017      Sep. 21, 2018
      RF Cable                5D-FB              COCCAB-001          Sep. 29, 2017      Sep. 28, 2018
      Fixed attenuator
                              STI02-2200-10      003                 Mar. 16, 2018      Mar. 15, 2019
      EMCI
      Software                BVADT_Cond_
                                                 NA                  NA                 NA
      BVADT                   V7.3.7.4

Note:
 1. The calibration interval of the above test instruments are 12 months and the calibrations are
    traceable to NML/ROC and NIST/USA.
 2. The test was performed in Conduction 1.
 3 Tested Date: Aug. 29, 2018




Report No.: RF180704E02-3                      Page No. 24 / 31                        Report Format Version: 6.1.1
Reference No.: 180704E02


4.2.3    Test Procedures

  a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being
     connected to the power mains through a line impedance stabilization network (LISN). Other support
     units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH
     of coupling impedance for the measuring instrument.
  b. Both lines of the power mains connected to the EUT were checked for maximum conducted
     interference.
  c.    The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was
        not recorded.

 Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP)
        and average detection (AV) at frequency 0.15MHz-30MHz.


4.2.4    Deviation from Test Standard

 No deviation.


4.2.5    Test Setup
                                 Vertical Ground
                                 Reference Plane                                Test Receiver


                                 EUT
                      40cm




                                                        80cm
                      LISN



                                                                   Horizontal Ground
                                                                   Reference Plane

                       Note: 1.Support units were connected to second LISN.




 For the actual test configuration, please refer to the attached file (Test Setup Photo).


4.2.6    EUT Operating Conditions

 Same as 4.1.6.




Report No.: RF180704E02-3                       Page No. 25 / 31                            Report Format Version: 6.1.1
Reference No.: 180704E02


4.2.7   Test Results

                                                                                 Quasi-Peak (QP) /
Phase                        Line (L)                      Detector Function
                                                                                 Average (AV)

                         Corr.    Reading Value      Emission Level           Limit              Margin
           Freq.
 No                     Factor       [dB (uV)]          [dB (uV)]          [dB (uV)]              (dB)
          [MHz]          (dB)      Q.P.     AV.       Q.P.     AV.       Q.P.       AV.      Q.P.        AV.
  1      0.17734        10.05     39.91    29.82     49.96    39.87     64.61     54.61     -14.65     -14.74
  2      0.21250        10.06     31.23    15.79     41.29    25.85     63.11     53.11     -21.82     -27.26
  3      0.44297        10.11     25.34    17.93     35.45    28.04     57.01     47.01     -21.56     -18.97
  4      8.37500        10.47     14.70     7.90     25.17    18.37     60.00     50.00     -34.83     -31.63
  5     24.45703        11.14     30.83    27.21     41.97    38.35     60.00     50.00     -18.03     -11.65
  6     28.68359        11.21     36.36    33.69     47.57    44.90     60.00     50.00     -12.43      -5.10
Remarks:
       1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
       2. The emission levels of other frequencies were very low against the limit.
       3. Margin value = Emission level – Limit value
       4. Correction factor = Insertion loss + Cable loss
       5. Emission Level = Correction Factor + Reading Value




Report No.: RF180704E02-3                     Page No. 26 / 31                        Report Format Version: 6.1.1
Reference No.: 180704E02


                                                                                 Quasi-Peak (QP) /
Phase                        Neutral (N)                   Detector Function
                                                                                 Average (AV)

                         Corr.   Reading Value       Emission Level           Limit              Margin
           Freq.
 No                     Factor      [dB (uV)]           [dB (uV)]          [dB (uV)]              (dB)
          [MHz]          (dB)     Q.P.     AV.        Q.P.     AV.       Q.P.       AV.      Q.P.        AV.
  1      0.17344         9.95    39.69    27.27      49.64    37.22     64.79     54.79     -15.15     -17.57
  2      0.44688        10.00    25.26    18.02      35.26    28.02     56.93     46.93     -21.67     -18.91
  3      0.81016        10.02    17.10     8.19      27.12    18.21     56.00     46.00     -28.88     -27.79
  4      2.55078        10.09    12.72     3.32      22.81    13.41     56.00     46.00     -33.19     -32.59
  5      5.46484        10.20    15.82     8.97      26.02    19.17     60.00     50.00     -33.98     -30.83
  6     24.45313        10.92    31.67    30.24      42.59    41.16     60.00     50.00     -17.41      -8.84
Remarks:
       1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
       2. The emission levels of other frequencies were very low against the limit.
       3. Margin value = Emission level – Limit value
       4. Correction factor = Insertion loss + Cable loss
       5. Emission Level = Correction Factor + Reading Value




Report No.: RF180704E02-3                     Page No. 27 / 31                        Report Format Version: 6.1.1
Reference No.: 180704E02


4.3     Conducted Out of Band Emission Measurement
4.3.1    Limits of Conducted Out of Band Emission Measurement

Below 30dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth).


4.3.2    Test Setup


                                                                  Spectrum
                EUT
                                         Attenuator               Analyzer



4.3.3    Test Instruments

Refer to section 4.1.2 to get information of above instrument.


4.3.4    Test Procedures

MEASUREMENT PROCEDURE REF
1. Set the RBW = 100 kHz.
2. Set the VBW ≥ 300 kHz.
3. Detector = peak.
4. Sweep time = auto couple.
5. Trace mode = max hold.
6. Allow trace to fully stabilize.
7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within
   the fundamental EBW.

MEASUREMENT PROCEDURE OOBE
1. Set RBW = 100 kHz.
2. Set VBW ≥ 300 kHz.
3. Detector = peak.
4. Sweep = auto couple.
5. Trace Mode = max hold.
6. Allow trace to fully stabilize.
7. Use the peak marker function to determine the maximum amplitude level.


4.3.5    Deviation from Test Standard

No deviation.


4.3.6    EUT Operating Conditions

The software provided by client to enable the EUT under transmission condition continuously at lowest,
middle and highest channel frequencies individually.

4.3.7    Test Results

The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line
indicates the 30dB offset below D1. It shows compliance with the requirement.




Report No.: RF180704E02-3                      Page No. 28 / 31                       Report Format Version: 6.1.1
Reference No.: 180704E02


 2.4GHz_802.11b CH6 + 5GHz_802.11a CH165

  Chain 0                                   Chain 1




  Chain 2                                   Chain 3




Report No.: RF180704E02-3             Page No. 29 / 31   Report Format Version: 6.1.1
Reference No.: 180704E02


5    Pictures of Test Arrangements


 Please refer to the attached file (Test Setup Photo).




Report No.: RF180704E02-3                      Page No. 30 / 31   Report Format Version: 6.1.1
Reference No.: 180704E02


Appendix – Information on the Testing Laboratories


We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to
provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC
recognized accredited test firms and accredited according to ISO/IEC 17025.

If you have any comments, please feel free to contact us at the following:

Linko EMC/RF Lab                                      Hsin Chu EMC/RF/Telecom Lab
Tel: 886-2-26052180                                   Tel: 886-3-6668565
Fax: 886-2-26051924                                   Fax: 886-3-6668323


Hwa Ya EMC/RF/Safety Lab
Tel: 886-3-3183232
Fax: 886-3-3270892


Email: service.adt@tw.bureauveritas.com
Web Site: www.bureauveritas-adt.com

The address and road map of all our labs can be found in our web site also.



--- END ---




Report No.: RF180704E02-3                     Page No. 31 / 31                  Report Format Version: 6.1.1
Reference No.: 180704E02



Document Created: 2019-03-23 16:56:35
Document Modified: 2019-03-23 16:56:35
Download: 60083010 8x8 802.11a/b/g/n/ac/ax Access Point Test Report Transmit Simultaneous Report Cisco Systems
Mirror Download [FCC.gov]60083010 8x8 802.11a/b/g/n/ac/ax Access Point Test Report Transmit Simultaneous Report Cisco Systems
Document ID4121694
Application ID+u+ws4mnttSsMP5HOpnZ5w==
Document DescriptionTransmit Simultaneous Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize82.32kB (1029051 bits)
Date Submitted2018-12-28 00:00:00
Date Available2019-01-18 00:00:00
Creation Date0000-00-00 00:00:00
Document Lastmod2018-12-28 15:42:51
Document TitleTransmit Simultaneous Report