JWF15S On/Off Switch User Manual Users Manual WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD.

WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD. On/Off Switch

Page 1 of JWF15S On/Off Switch User Manual Users Manual WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD.
Page 2 of JWF15S On/Off Switch User Manual Users Manual WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD.
Page 3 of JWF15S On/Off Switch User Manual Users Manual WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD.
Page 4 of JWF15S On/Off Switch User Manual Users Manual WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD.

INSTALLATION INSTRUCTIONS
JWF15S
Wireless Home Automation Control Device
Interchangeable Face Cover
On/Off Switch
 INSTALLATION
OPERATIONS
Single Switch Wiring Schematic
White (Neutral)
Switch Paddle
Red
(Load)
LED Light
To replace the face
cover, just use a
flat screwdriver to
pry-off the
interchangeable plate.
JWF15S
Green (Ground)
 SPECIFICATIONS
Voltage.............................................................................................. 120VAC, 60Hz
Incandescent..................................................................................................1000W
Electronic Ballast...................................................................................................5A
Standard Ballast............................................................................................1200VA
Resistive................................................................................................1800W(15A)
Motor.............................................................................................................. 1/2 HP
Operating Temperature.........................................................32°F~104°F(0°C~40°C)
Wire Strip Length.................................................................................16mm(5/8 in.)
Supply Connection.....................................14 AWG wires, suitable for at least 75°C
Screw Torque................................................................................................20 lbf-in
Protocol.........................................................................................IEEE 802.11b/g/n
Wireless Type.............................................................................................. 2.4GHz
Manual Control
Black (Line/Hot)
The switch paddle on the JWF15S allows the user to:
1, Turn ON/OFF the connected lighting.
1, To turn the connected lighting ON: Tap the top of the switch paddle.
Wiring Diagram:
2, To turn the connected lighting OFF: Tap the bottom of the switch paddle.
Please Note: After a power failure, the WF15S on/off switch returns to OFF state.
MyTS App Control
Red
Load (to light fixture)
 FEATURES
Green
Perfect Replacement for regular wall switch, 120VAC, 15Amp
Ground
Manual and Remote ON/OFF control of any connected lighting and other electrical
electrical load
You can Turns your devices on or off at any time or anywhere have Internet using
the free MyTS App on your smartphone.
1. Download MyTS app from the App Store or Google Play.
2. Connect mobile device to your 2.4GHz WIFI network. Please note
White
Black
Neutral
this switch can only be connected to 2.4GHz network.
Hot (from breaker)
Interchangeable Color Face Plate
 DESCRIPTION
The JWF15S ON/OFF Switch is a perfect wireless manual and remote on/off control
replacement of regular wall switch, controlling incandescent, LED, fluorescent, ballast
and so on.
1.WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuit
breaker or fuse and test that power is off before wiring.
2. Remove wall plate and existing switch mounting screws.
3. Carefully remove the existing switch from the switch box.
3. Launch MyTS and follow the in-app instructions to connect the
switch to your network.
a. Login the MyTS, you need create a new account then sign in.
4. Disconnect the wiring from the existing switch.
WARNINGS AND CAUTIONS
Be sure to read the instruction carefully before installation, and the manufacturer
will not be responsible for any product damage that does not follow the instruction
1. Wet hands are strictly prohibited.
2. Must work strictly according to the rated load.
3. Do not continue to work after self-disassembly of any nature and damage of
external forces.
-01-
5. Connect this JWF15S switch as shown in the wiring diagram: Black lead to hot wire,
white lead to neutral wire, red lead to load wire, green lead to ground wire.
6. Check connections to be sure they are tight and no bare conductors are exposed.
7. Insert the JWF15S switch into the standard outlet box carefully.
8. Make sure the JWF15S switch to the box using the supplied screws.
9. Attach the wall plate.
10. Restore power at the circuit breaker and test the system.
-02-
-03-
INSTALLATION INSTRUCTIONS
b. Click the button “+” then enter your WIFI paasword
Please Note:
Non-modification Statement:
1. During the process of adding device, you must select the correct name of WIFI
Any changes or modifications not expressly approved by the party responsible
router and fill in the correct WIFI password, otherwise the device will not be able
to add successfully.
2. Now, this WIFI Switch can only be paired with one phone device.
LED INDICATION
Quick Flashing in Blue: Connecting to the network.
Blue LED keep lighting: Connected to the network.
Solid Blue: The WIFI Switch is switched on.
Off: The WIFI Switch is switched off.
c. Pls tap the JWF15S up paddle above 10 seconds until the blue LED is in
a quick flashing state, then this switch can be added successfully.
FCC COMPLIANCE STATEMENT
Federal Communication Commission Interference Statement
The equipment has been tested and found to comply with the limits for a class B
B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment uses, generates and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
d. Pls select this switch and then click the "Connect" button then finished .
you can turn on or off the swich.
Click the
Click the
you can edit this swich device.
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1. This device may not cause interference, and 2. This
device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
RF Exposure: A distance of 20 cm shall be maintained between the antenna
and users, and the transmitter module may not be co-located with any other
transmitter or antenna.
-04-
-05-
for compliance could void the user's authority to operate this equipment.
WARRANTY INFORMATION
Our company warranties its products to be free of defects in materials and workman
-ship for a period of two (2) years. There are no obligations or liabilities on the part
of our company for consequential damages arising out of or in connection with the
use or performance of this product or other indirect damages with respect to loss
of property, revenue, or profit, or cost of removal, installation or reinstallation.
Jun, 2018
INSTALLATION INSTRUCTIONS
JWF15S-3W
Wireless Home Automation Control Device
Interchangeable Face Cover
On/Off Switch
 INSTALLATION
1.WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuit
Single Switch Wiring Schematic
breaker or fuse and test that power is off before wiring.
2. Remove wall plate and existing switch mounting screws.
White (Neutral)
3. Carefully remove the existing switch from the switch box.
4. Disconnect the wiring from the existing switch.
Red
(Load)
5. Connect this JWF15S-3W switch as shown in the wiring diagram: Black lead to hot
wire, white lead to neutral wire, red lead to load wire, green lead to ground wire.
6. Check connections to be sure they are tight and no bare conductors are exposed.
JWF15S-3W
Green (Ground)
7. Insert the JWF15S-3W switch into the standard outlet box carefully.
8. Make sure the JWF15S-3W switch to the box using the supplied screws.
9. Attach the wall plate.
10. Restore power at the circuit breaker and test the system.
Black (Line/Hot)
 SPECIFICATIONS
Voltage.............................................................................................. 120VAC, 60Hz
Incandescent..................................................................................................1000W
Electronic Ballast...................................................................................................5A
Standard Ballast............................................................................................1200VA
Resistive................................................................................................1800W(15A)
Motor.............................................................................................................. 1/2 HP
Operating Temperature.........................................................32°F~104°F(0°C~40°C)
Wire Strip Length.................................................................................16mm(5/8 in.)
Supply Connection.....................................14 AWG wires, suitable for at least 75°C
Screw Torque................................................................................................20 lbf-in
Protocol.........................................................................................IEEE 802.11b/g/n
Wireless Type.............................................................................................. 2.4GHz
 FEATURES
3-Way Wiring Schematic using one JWF15S and one 3-way Auxiliary Switch
White(Netural)
Traveler(Yellow)
Traveler(Yellow)
Red(Load)
Red(Load)
Switch Paddle
JWF15S-3W
JWF15S-3W
SWITCH
SWITCH
LED Light
To replace the face
cover, just use a
flat screwdriver to
pry-off the
interchangeable plate.
Green(Groud)
Green(Groud)
Black(Hot)
Black(Hot)
Perfect Replacement for regular wall switch, 120VAC, 15Amp
Wiring Method 2
White(Netural)
Manual and Remote ON/OFF control of any connected lighting and other electrical
electrical load
Can be used for signal pole or 3- Way (Multi-location) with Auxiliary Switch (sold
separately)
You can Turns your devices on or off at any time or anywhere have Internet using
the free MyTS App on your smartphone.
Manual Control
Traveler(Yellow)
Red(Load)
JWF15S-3W
The switch paddle on the JWF15S-3W allows the user to:
1, Turn ON/OFF the connected lighting.
1, To turn the connected lighting ON: Tap the top of the switch paddle.
SWITCH
2, To turn the connected lighting OFF: Tap the bottom of the switch paddle.
Green(Groud)
Please Note: After a power failure, the WF15S-3W on/off switch returns to OFF state.
Interchangeable Color Face Plate
MyTS App Control
Black(Hot)
 DESCRIPTION
Wiring Method 3
WARNINGS AND CAUTIONS
OPERATIONS
White(Netural)
Wiring Method 1
The JWF15S-3W ON/OFF Switch is a perfect wireless manual and remote on/off
control replacement of regular wall switch, controlling incandescent, LED, fluorescent,
ballast and so on. This JWF15S-3W ON/OFF Switch works with 3-Way Auxiliary
Switch that reducing energy consumption, enhancing the value of technology of
your home, condominiums and apartment.
1. Download MyTS app from the App Store or Google Play.
Traveler works with 3-way Auxiliary Switch control( sold separately).
Wiring Diagram:
Red
Yellow
Traveler
Load (to light fixture)
Be sure to read the instruction carefully before installation, and the manufacturer
will not be responsible for any product damage that does not follow the instruction
2. Connect mobile device to your 2.4GHz WIFI network. Please note
this switch can only be connected to 2.4GHz network.
Green
Ground
1. Wet hands are strictly prohibited.
2. Must work strictly according to the rated load.
3. Do not continue to work after self-disassembly of any nature and damage of
external forces.
White
Black
Neutral
Hot (from breaker)
3. Launch MyTS and follow the in-app instructions to connect the
switch to your network.
-01-
-02-
-03-
INSTALLATION INSTRUCTIONS
a. Login the MyTS, you need create a new account then sign in.
d. Pls select this switch and then click the "Connect" button then finished .
you can turn on or off the swich.
Click the
Click the
you can edit this swich device.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1. This device may not cause interference, and 2. This
device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
b. Click the button “+” then enter your WIFI paasword
RF Exposure: A distance of 20 cm shall be maintained between the antenna
and users, and the transmitter module may not be co-located with any other
transmitter or antenna.
Please Note:
1. During the process of adding device, you must select the correct name of WIFI
router and fill in the correct WIFI password, otherwise the device will not be able
to add successfully.
Non-modification Statement:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
2. Now, this WIFI Switch can only be paired with one phone device.
LED INDICATION
Quick Flashing in Blue: Connecting to the network.
Blue LED keep lighting: Connected to the network.
Solid Blue: The WIFI Switch is switched on.
Off: The WIFI Switch is switched off.
c. Pls tap the JWF15S-3W up paddle above 10 seconds until the blue LED is in
a quick flashing state, then this switch can be added successfully.
Our company warranties its products to be free of defects in materials and workman
-ship for a period of two (2) years. There are no obligations or liabilities on the part
of our company for consequential damages arising out of or in connection with the
use or performance of this product or other indirect damages with respect to loss
of property, revenue, or profit, or cost of removal, installation or reinstallation.
Jun, 2018
FCC COMPLIANCE STATEMENT
Federal Communication Commission Interference Statement
The equipment has been tested and found to comply with the limits for a class B
B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment uses, generates and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-04-
WARRANTY INFORMATION
-05-
Download: JWF15S On/Off Switch User Manual Users Manual WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD.
Mirror Download [FCC.gov]JWF15S On/Off Switch User Manual Users Manual WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD.
Document ID3908499
Application IDp6FWE7JytPFz9rfaQLyhnA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize281.24kB (3515522 bits)
Date Submitted2018-07-02 00:00:00
Date Available2018-07-03 00:00:00
Creation Date2018-06-27 18:08:04
Producing SoftwareAcrobat Distiller 7.0 for Macintosh
Document Lastmod2018-06-27 18:08:17
Document TitleUsers Manual
Document CreatorAdobe PageMaker 6.52
Document Author: YB

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : YB
Create Date                     : 2018:06:27 18:08:04+08:00
Modify Date                     : 2018:06:27 18:08:17+08:00
Subject                         : 
Title                           : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:06:27 18:08:17+08:00
Creator Tool                    : Adobe PageMaker 6.52
Format                          : application/pdf
Creator                         : YB
Document ID                     : uuid:2d1396a2-3c48-4a45-ac0a-5b192d031c7d
Instance ID                     : uuid:91e10f0d-1e32-4af3-8781-1df6f5332d74
Producer                        : Acrobat Distiller 7.0 for Macintosh
Page Count                      : 4