Smart Route DataCollector Test Report Test Report Kenure Developments Ltd

Kenure Developments Ltd Smart Route DataCollector

See More Details For FCC ID: Q8Q-SRDC
Purchase on Amazon: Smart Route DataCollector
Download: Smart Route DataCollector Test Report Test Report Kenure Developments Ltd
Document DescriptionTest Report
Document TypeTest Report
Document TitleTest Report

Document

Trouble Loading? Try Smart Route DataCollector Test Report Test Report Kenure Developments Ltd Downloading this document. Zoom In and Out With ⌘ / Ctrl key and plus [+] or minus [-]
TEST REPORT
FROM
RFI GLOBAL SERVICES LTD
Test of: DataCollector915
FCC ID: Q8Q-SRDC
To: FCC Part 15.247: 2012 Subpart C
Test Report Serial No.:
RFI-RPT-RP86123JD02A V4.0
Version 4.0 Supersedes All Previous Versions
This Test Report Is Issued Under The Authority
Of John Newell, Group Quality Manager:
Checked By:
Sarah Williams
Signature:
Date of Issue:
08 May 2013
This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if
it is being viewed in PDF format with the following security options not allowed: Changing the document,
Selecting text and graphics, Adding or changing notes and form fields.
This report may not be reproduced other than in full, except with the prior written approval of RFI Global
Services Ltd. The results in this report apply only to the sample(s) tested.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 2 of 41
RFI Global Services Ltd
This page has been left intentionally blank.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 3 of 41
Table of Contents
1. Customer Information .................................................................................................................4
2. Summary of Testing ....................................................................................................................5
2.1. General Information 5
2.2. Summary of Test Results 5
2.3. Methods and Procedures 6
2.4. Deviations from the Test Specification 6
3. Equipment Under Test (EUT) .....................................................................................................7
3.1. Identification of Equipment Under Test (EUT) 7
3.2. Description of EUT 7
3.3. Modifications Incorporated in the EUT 7
3.4. Additional Information Related to Testing 8
3.5. Support Equipment 8
3.6. Antenna 9
4. Operation and Monitoring of the EUT during Testing ............................................................10
4.1. Operating Modes 10
4.2. Configuration and Peripherals 10
5. Measurements, Examinations and Derived Results ...............................................................11
5.1. General Comments 11
5.2. Test Results 12
5.2.1. Receiver/Idle AC Conducted Spurious Emissions 12
5.2.2. Receiver/Idle Mode Radiated Spurious Emissions 15
5.2.3. Transmitter AC Conducted Spurious Emissions 19
5.2.4. Transmitter 20 dB Bandwidth 22
5.2.5. Transmitter Carrier Frequency Separation 24
5.2.6. Transmitter Number of Hopping Frequencies and Average Time of
Occupancy 25
5.2.7. Transmitter Maximum Peak Output Power 27
5.2.8. Transmitter Radiated Emissions 29
5.2.9. Transmitter Duty Cycle 36
5.2.10. Transmitter Band Edge Radiated Emissions 38
6. Measurement Uncertainty ........................................................................................................40
Appendix 1. Test Equipment Used ..............................................................................................41
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 4 of 41
RFI Global Services Ltd
Customer Information
Company Name:
Kenure Developments Ltd
Address:
Springlakes
Deadbrook Lane
Aldershot
Hampshire
GU12 4UH
United Kingdom
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 5 of 41
Summary of Testing
General Information
Specification Reference:
47CFR15.247
Specification Title:
Code of Federal Regulations Volume 47 (Telecommunications) 2012:
Part 15 Subpart C (Intentional Radiators) - Section 15.247
Specification Reference:
47CFR15.107 and 47CFR15.109
Specification Title:
Code of Federal Regulations Volume 47 (Telecommunications) 2012:
Part 15 Subpart B (Unintentional Radiators) - Sections 15.107 and 15.109
Specification Reference:
47CFR15.207 and 47CFR15.209
Specification Title:
Code of Federal Regulations Volume 47 (Telecommunications) 2012:
Part 15 Subpart C (Intentional Radiators) - Sections 15.207 and 15.209
Site Registration:
209735
Location of Testing:
RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH.
Test Dates:
03 September 2012 to 12 September 2012
Summary of Test Results
FCC Reference
(47CFR)
Measurement
Result
Part 15.107(a)
Receiver/Idle Mode AC Conducted Emissions
Part 15.109
Receiver/Idle Mode Radiated Spurious Emissions
Part 15.207
Transmitter AC Conducted Emissions
Part 15.247(a)(1)(i)
Transmitter 20 dB Bandwidth
Part 15.247(a)(1)
Transmitter Carrier Frequency Separation
Part 15.247(a)(1)(i)
Transmitter Number of Hopping Frequencies
and Average Time of Occupancy
Part 15.247(b)(2)
Transmitter Maximum Peak Output Power
Part 15.247(d)/
15.209(a)
Transmitter Radiated Emissions
Part 15.247(d)/
15.209(a)
Transmitter Band Edge Radiated Emissions
Key to Results
= Complied = Did not comply
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 6 of 41
RFI Global Services Ltd
Methods and Procedures
Reference:
ANSI C63.4 (2009)
Title:
American National Standard for Methods of Measurement of Radio-Noise
Emissions from Low-Voltage Electrical and Electronic Equipment in the
Range of 9 kHz to 40 GHz.
Reference:
ANSI C63.10 (2009)
Title:
American National Standard for Testing Unlicensed Wireless Devices
Deviations from the Test Specification
For the measurements contained within this test report, there were no deviations from, additions to, or
exclusions from the test specification identified above.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 7 of 41
Equipment Under Test (EUT)
Identification of Equipment Under Test (EUT)
Brand Name:
Smart Route DataCollector
Model Name or Number:
DataCollector915
Serial Number:
4
Hardware Version Number:
#B
Software Version Number:
1.00FCC
FCC ID:
Q8Q-SRDC
Description of EUT
The equipment under test was a 915 MHz Wireless Fixed AMR Reader operating over the 902 MHz to 928
MHz band. The EUT uses a total of 50 channels for communications with a 500 kHz channel spacing.
Modifications Incorporated in the EUT
No modifications were applied to the EUT during testing.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 8 of 41
RFI Global Services Ltd
Additional Information Related to Testing
Tested Technology:
FHSS
Power Supply Requirement:
Nominal
12 VDC
Type of Unit:
Transceiver
Channel Spacing:
500 kHz
Modulation:
2-FSK
Data Rate:
Max 320 kbps, min 100 kbps
Maximum Conducted Output Power:
28.0 dBm
Transmit Frequency Range:
902 MHz to 928 MHz
Transmit Channels Tested:
Channel ID
Channel Number
Channel
Frequency
(MHz)
Bottom
1
902.5
Middle
26
915.0
Top
50
927.5
Receive Frequency Range:
902 MHz to 928 MHz
Receive Channels Tested:
Channel ID
Channel Number
Channel
Frequency
(MHz)
Bottom
1
902.5
Middle
26
915.0
Top
50
927.5
Support Equipment
The following support equipment was used to exercise the EUT during testing:
Description:
Bench power supply (S0537)
Brand Name:
TTI
Model Name or Number:
EL302D
Serial Number:
249928
Description:
Laptop
Brand Name:
Dell
Model Name or Number:
Inspiron
Serial Number:
Not Marked or Stated
Description:
1 Metre USB lead
Brand Name:
N/A
Model Name or Number:
N/A
Serial Number:
N/A
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 9 of 41
Antenna
Type
Stated Gain (dBi)
Manufacturer
Part No.
Dipole (External)
2.2
Antenna Factor
ANT-916-CW-HWR-SMA
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 10 of 41
RFI Global Services Ltd
Operation and Monitoring of the EUT during Testing
Operating Modes
The EUT was tested in the following operating mode(s):
Transmitter tests were performed with the EUT transmitting at full power on the bottom, middle and
top channels or frequency hopping across the band of operation.
Receiver/idle tests were performed with the EUT in receive mode.
Configuration and Peripherals
The EUT was tested in the following configuration(s):
A bench power supply was used to provide power to the EUT for all tests including AC conducted.
A bespoke application on a laptop PC was used to enable or disable frequency hopping mode as
required.
The PC was disconnected from the EUT once frequency hopping had been enabled or disabled as
required for the relevant test.
An external switch on the EUT was used to select bottom, middle or top channels when in static
mode.
The EUT could be changed between static channels using a 0.15 Metre Cable with a button on the
end which was attached by the customer for testing purposes.
Radiated spurious emissions tests had the antenna connected to the EUT.
The antenna was removed for all other tests.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 11 of 41
Measurements, Examinations and Derived Results
General Comments
Measurement uncertainties are evaluated in accordance with current best practice. Our reported expanded
uncertainties are based on standard uncertainties, which are multiplied by an appropriate coverage factor to
provide a statistical confidence level of approximately 95%. Please refer to Section 6. Measurement
Uncertainty for details.
In accordance with UKAS requirements all the measurement equipment is on a calibration schedule. All
equipment was within the calibration period on the date of testing.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 12 of 41
RFI Global Services Ltd
Test Results
Receiver/Idle AC Conducted Spurious Emissions
Test Summary:
Test Engineer:
Mark Percival
Test Date:
12 September 2012
Test Sample Serial No:
4
FCC Part:
15.107(a)
Test Method Used:
As detailed in ANSI C63.10 Section 6.2 referencing ANSI C63.4
Environmental Conditions:
Temperature (°C):
21
Relative Humidity (%):
42
Results: Quasi Peak / Live
Frequency
(MHz)
Line
Level
(dBV)
Limit
(dBV)
Margin
(dB)
Result
0.150
Live
19.3
66.0
46.7
Complied
7.579
Live
11.0
60.0
49.0
Complied
13.798
Live
12.0
60.0
48.0
Complied
14.370
Live
12.0
60.0
48.0
Complied
16.719
Live
10.4
60.0
49.6
Complied
17.232
Live
9.9
60.0
50.1
Complied
Results: Average / Live
Frequency
(MHz)
Line
Level
(dBV)
Limit
(dBV)
Margin
(dB)
Result
0.190
Live
13.6
54.0
40.4
Complied
10.824
Live
5.8
50.0
44.2
Complied
13.569
Live
6.7
50.0
43.3
Complied
13.870
Live
6.0
50.0
44.0
Complied
14.487
Live
9.3
50.0
40.7
Complied
18.303
Live
12.6
50.0
37.4
Complied
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 13 of 41
Receiver/Idle AC Conducted Spurious Emissions (continued)
Results: Quasi Peak / Neutral
Frequency
(MHz)
Line
Level
(dBV)
Limit
(dBV)
Margin
(dB)
Result
0.181
Neutral
18.8
64.4
45.6
Complied
0.550
Neutral
7.6
56.0
48.4
Complied
13.492
Neutral
11.5
60.0
48.5
Complied
13.915
Neutral
11.1
60.0
48.9
Complied
14.361
Neutral
11.9
60.0
48.1
Complied
17.313
Neutral
10.8
60.0
49.2
Complied
Results: Average / Neutral
Frequency
(MHz)
Line
Level
(dBV)
Limit
(dBV)
Margin
(dB)
Result
0.199
Neutral
13.9
53.6
39.7
Complied
13.474
Neutral
7.9
50.0
42.1
Complied
13.879
Neutral
8.0
50.0
42.0
Complied
15.256
Neutral
8.0
50.0
42.0
Complied
18.244
Neutral
14.8
50.0
35.2
Complied
Note(s):
1. A bench power supply was used to provide power to the EUT.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 14 of 41
RFI Global Services Ltd
Receiver/Idle Mode AC Conducted Spurious Emissions (continued)
Live
Neutral
Note: This plot is a pre-scan and for indication purposes only. For final measurements, see accompanying tables.
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
150k 300 400 500 800 1M 2M 3M 4M 5M 6 810M 20M 30M
Level in dV
Frequ ency in H z
FCC Part 15 Class B Voltage on Mains QP
FCC Part 15 Class B Voltage on Mains AV
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
150k 300 400 500 800 1M 2M 3M 4M 5M 6 810M 20M 30M
Level in dV
Frequ ency in H z
FCC Part 15 Class B Voltage on Mains QP
FCC Part 15 Class B Voltage on Mains AV
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 15 of 41
Receiver/Idle Mode Radiated Spurious Emissions
Test Summary:
Test Engineer:
Mark Percival
Test Date:
04 September 2012
Test Sample Serial No:
4
FCC Part:
15.109
Test Method Used:
As detailed in ANSI C63.10 Sections 6.3 and 6.5
referencing ANSI C63.4
Frequency Range:
30 MHz to 1000 MHz
Environmental Conditions:
Temperature (°C):
23
Relative Humidity (%):
50
Results: Quasi-Peak
Frequency
(MHz)
Antenna
Polarity
Level
(dBV/m)
Limit
(dBV/m)
Margin
(dB)
Result
83.981
Vertical
32.3
40.0
7.7
Complied
251.992
Vertical
27.3
46.0
18.7
Complied
275.992
Vertical
30.3
46.0
15.7
Complied
299.983
Vertical
35.2
46.0
10.8
Complied
323.983
Vertical
29.8
46.0
16.2
Complied
347.975
Vertical
31.4
46.0
14.6
Complied
371.994
Vertical
26.0
46.0
20.0
Complied
947.182
Vertical
24.5
46.0
21.5
Complied
Note(s):
1. The final measured value, for the given emission, in the table above incorporates the calibrated antenna
factor and cable loss.
2. All other emissions shown on the pre-scan plot were investigated and found to be ambient or >20 dB
below the applicable limit or below the measurement system noise floor.
3. Measurements below 1 GHz were performed in a semi-anechoic chamber (RFI Asset Number K0001) at
a distance of 3 metres. The EUT was placed at a height of 80 cm above the reference ground plane in
the centre of the chamber turntable. Maximum emission levels were determined by height searching the
measurement antenna over the range 1 metre to 4 metres.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 16 of 41
RFI Global Services Ltd
Receiver/Idle Mode Radiated Spurious Emissions (continued)
Note: This plot is a pre-scan and for indication purposes only. For final measurements, see accompanying table.
0
10
20
30
40
50
60
70
80
3 0 M 5 0 M6 0 M 8 0 M1 0 0 M 2 0 0 M 3 0 0 M4 0 0 M5 0 0 M 8 0 0 M1G
Level in d V/m
F r e q u e n c y i n H z
F C C P a r t 1 5 C l a s s B F ie l d S t r e n g t h Q P 3 M
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 17 of 41
Receiver/Idle Mode Radiated Spurious Emissions (continued)
Test Summary:
Test Engineer:
Andrew Edwards
Test Date:
06 September 2012
Test Sample Serial No:
4
FCC Part:
15.109
Test Method Used:
As detailed in ANSI C63.10 Sections 6.3 and 6.6
referencing ANSI C63.4
Frequency Range:
1 GHz to 4.7 GHz
Environmental Conditions:
Temperature (°C):
24
Relative Humidity (%):
40
Results: Bottom channel
Frequency
(MHz)
Antenna
Polarity
Peak Level
(dBV/m)
Average Limit
(dBV/m)
Margin
(dB)
Result
3813.627
Vertical
47.4
54.0
6.6
Complied
Note(s):
1. The final measured value, for the given emission, in the table above incorporates the calibrated antenna
factor and cable loss.
2. The emission at 2.449 GHz was measured and found to be an ambient emission.
3. No spurious emissions were detected above the noise floor of the measuring receiver therefore the
highest peak noise floor reading of the measuring receiver was recorded as shown in the table above.
The peak level was compared to the average limit as opposed to being compared to the peak limit
because this is the more onerous limit.
4. Pre-scans above 1 GHz were performed in a fully anechoic chamber (RFI Asset Number K0002) at a
distance of 3 metres. The EUT was placed at a height of 1.5 metres above the test chamber floor in the
centre of the chamber turntable. All measurement antennas were placed at a fixed height of 1.5 metres
above the test chamber floor, in line with the EUT. Final measurements above 1 GHz were performed in
a semi-anechoic chamber (RFI Asset Number K0001) at a distance of 3 metres. The EUT was placed at
a height of 80 cm above the reference ground plane in the centre of the chamber turntable. Maximum
emission levels were determined by height searching the measurement antenna over the range 1 metre
to 4 metres.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 18 of 41
RFI Global Services Ltd
Receiver/Idle Mode Radiated Spurious Emissions (continued)
A
RBW
1 MHz
VBW
3 MHz
SWT
7.5 ms
RF Att
0 dB
IN1
1MA
Ref Lvl
80 dB
V
Ref Lvl
80 dB
V
Unit
dB
V
1MAX
1MA
Start
1 GHz
Stop
4 GHz
300 MHz/
TDF
-10
0
10
20
30
40
50
60
70
-20
80
1 2
Marker 1 [T1]
47.26 dB
V
2.44889780 GHz
1 [T1] 47.26 dB
V
2.44889780 GHz
2 [T1] 47.40 dB
V
3.81362725 GHz
D1 54 dB
V
Title: 86123
Comment A: RADIATED SPURIOUS EMISSIONS STANDBY/IDLE MODE
Date: 6.SEP.2012 19:56:27
A
SWT
5 ms
Unit
dB
V
TDF
Start
4 GHz
Stop
4.7 GHz
70 MHz/
Ref Lvl
80 dB
V
Ref Lvl
80 dB
V
RBW
1 MHz
VBW
3 MHz
RF Att
0 dB
IN1
1MA
1VIEW
1MA
-10
0
10
20
30
40
50
60
70
-20
80
1
Marker 1 [T1]
39.93 dB
V
4.34509018 GHz
D1 54 dB
V
Title: 86123
Comment A: RADIATED SPURIOUS EMISSIONS STANDBY/IDLE MODE
Date: 6.SEP.2012 19:30:15
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 19 of 41
Transmitter AC Conducted Spurious Emissions
Test Summary:
Test Engineer:
Mark Percival
Test Date:
12 September 2012
Test Sample Serial No:
4
FCC Part:
15.207
Test Method Used:
As detailed in ANSI C63.10 Section 6.2 referencing ANSI C63.4
Environmental Conditions:
Temperature (°C):
21
Relative Humidity (%):
42
Results: Quasi Peak / Live
Frequency
(MHz)
Line
Level
(dBV)
Limit
(dBV)
Margin
(dB)
Result
0.154
Live
21.3
65.8
44.5
Complied
0.222
Live
19.5
62.7
43.2
Complied
0.433
Live
10.2
57.2
47.0
Complied
10.828
Live
9.1
60.0
50.9
Complied
13.866
Live
10.3
60.0
49.7
Complied
17.308
Live
12.2
60.0
47.8
Complied
18.303
Live
20.5
60.0
39.5
Complied
Results: Average / Live
Frequency
(MHz)
Line
Level
(dBV)
Limit
(dBV)
Margin
(dB)
Result
0.204
Live
13.9
53.4
39.5
Complied
7.872
Live
11.4
50.0
38.6
Complied
13.951
Live
6.0
50.0
44.0
Complied
14.455
Live
6.0
50.0
44.0
Complied
16.782
Live
9.9
50.0
40.1
Complied
18.244
Live
16.7
50.0
33.3
Complied
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 20 of 41
RFI Global Services Ltd
Transmitter AC Conducted Spurious Emissions (continued)
Results: Quasi Peak / Neutral
Frequency
(MHz)
Line
Level
(dBV)
Limit
(dBV)
Margin
(dB)
Result
0.154
Neutral
21.3
65.8
44.5
Complied
0.636
Neutral
7.6
56.0
48.4
Complied
13.569
Neutral
10.6
60.0
49.4
Complied
13.866
Neutral
9.7
60.0
50.3
Complied
14.334
Neutral
14.3
60.0
45.7
Complied
17.340
Neutral
12.0
60.0
48.0
Complied
18.294
Neutral
11.3
60.0
48.8
Complied
Results: Average / Neutral
Frequency
(MHz)
Line
Level
(dBV)
Limit
(dBV)
Margin
(dB)
Result
0.199
Neutral
13.9
53.6
39.7
Complied
7.998
Neutral
7.8
50.0
42.2
Complied
13.573
Neutral
5.9
50.0
44.1
Complied
13.731
Neutral
5.9
50.0
44.1
Complied
13.767
Neutral
5.9
50.0
44.1
Complied
13.983
Neutral
6.6
50.0
43.4
Complied
14.334
Neutral
9.2
50.0
40.8
Complied
14.806
Neutral
8.0
50.0
42.0
Complied
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 21 of 41
Transmitter AC Conducted Spurious Emissions (continued)
Live
Neutral
Note: This plot is a pre-scan and for indication purposes only. For final measurements, see accompanying tables.
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
150k 300 400 500 800 1M 2M 3M 4M 5M 6 810M 20M 30M
Level in dV
Frequ ency in H z
FCC Part 15 Class B Voltage on Mains QP
FCC Part 15 Class B Voltage on Mains AV
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
150k 300 400 500 800 1M 2M 3M 4M 5M 6 810M 20M 30M
Level in dV
Frequ ency in H z
FCC Part 15 Class B Voltage on Mains QP
FCC Part 15 Class B Voltage on Mains AV
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 22 of 41
RFI Global Services Ltd
Transmitter 20 dB Bandwidth
Test Summary:
Test Engineer:
Mark Percival
Test Date:
03 September 2012
Test Sample Serial No:
4
FCC Part:
15.247(a)(1)(i)
Test Method Used:
As detailed in ANSI C63.10 Section 6.9.1
Environmental Conditions:
Temperature (°C):
21
Relative Humidity (%):
59
Results:
Channel
20 dB Bandwidth
(kHz)
Limit
(kHz)
Margin
(kHz)
Result
Bottom
323.718
500
176.282
Complied
Middle
323.718
500
176.282
Complied
Top
323.718
500
176.282
Complied
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 23 of 41
Transmitter 20 dB Bandwidth (continued)
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
Center
902.5 MHz
Span
1 MHz
100 kHz/
*
*
RBW
10 kHz
VBW
100 kHz
SWT
40 ms
AC
3DB
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
6.67 dBm
902.346153846 MHz
1
Delta 1 [T1 ]
-1.24 dB
323.717948716 kHz
D1 27.1 dBm
D2 7.1 dBm
86123JD02 20dB BAND WIDTH
Date: 3.SEP.2012 13:23:10
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
Center
915 MHz
Span
1 MHz
100 kHz/
*
*
3DB
RBW
10 kHz
VBW
100 kHz
SWT
40 ms
AC
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
5.41 dBm
914.849358974 MHz
1
Delta 1 [T1 ]
-2.47 dB
323.717948716 kHz
D1 26.7 dBm
D2 6.7 dBm
86123JD02 20dB BAND WIDTH
Date: 3.SEP.2012 13:20:54
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
Center
927.5 MHz
Span
1 MHz
100 kHz/
*
*
3DB
RBW
10 kHz
VBW
100 kHz
SWT
40 ms
AC
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
4.87 dBm
927.347756410 MHz
1
Delta 1 [T1 ]
-0.10 dB
323.717948716 kHz
D1 25.5 dBm
D2 5.5 dBm
86123JD02 20dB BAND WIDTH
Date: 3.SEP.2012 13:16:39
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 24 of 41
RFI Global Services Ltd
Transmitter Carrier Frequency Separation
Test Summary:
Test Engineer:
Mark Percival
Test Date:
03 September 2012
Test Sample Serial No:
4
FCC Part:
15.247(a)(1)
Test Method Used:
As detailed in ANSI C63.10 Section 7.7.2
Environmental Conditions:
Temperature (°C):
21
Relative Humidity (%):
59
Results:
Carrier Frequency
Separation (kHz)
Limit*
(kHz)
Margin
(kHz)
Result
500.000
323.718
176.282
Complied
Note(s):
1. *Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of
25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. The 20 dB bandwidth
measured for the middle channel was used to calculate the limit.
A
*
*
3DB
RBW
100 kHz
VBW
100 kHz
SWT
2.5 ms
Att
55 dB
AC
Offset
10.2 dB
LVL
Ref
40 dBm
Center
915 MHz
Span
2 MHz
200 kHz/
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
28.04 dBm
914.586538462 MHz
1
Delta 1 [T1 ]
-0.23 dB
500.000000004 kHz
86123JD02 CARRIER FREQUENCY SEPARATION
Date: 3.SEP.2012 10:04:14
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 25 of 41
Transmitter Number of Hopping Frequencies and Average Time of Occupancy
Test Summary:
Test Engineer:
Mark Percival
Test Date:
03 September 2012
Test Sample Serial No:
4
FCC Part:
15.247(a)(1)(i)
Test Method Used:
As detailed in ANSI C63.10 Sections 7.7.3 and 7.7.4
Environmental Conditions:
Temperature (°C):
21
Relative Humidity (%):
59
Results: Number of Hopping Frequencies:
Number of Hops
Limit (Hops)
Note
Result
50
25
1
Complied
Results: Average Time of Occupancy
Emission
Width (ms)
Average Time
of Occupancy*
(s)
Limit
(s)
Margin
(s)
Note
Result
6.346
0.050768
0.4
0.349232
1
Complied
Note(s):
1. For a hopping channel with 20 dB bandwidth equal to, or greater than 250 kHz.
Limit:
If the 20 dB bandwidth of the hopping channel is 250 kHz or greater, the system shall use at least 25
hopping frequencies and the average time of occupancy on any frequency shall not be greater than 0.4
seconds within a 10 second period.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 26 of 41
RFI Global Services Ltd
Transmitter Time of Occupancy (continued)
TX on time in 10 second period
TX on period
Number Of Hopping Channels
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
*
RBW
100 kHz
VBW
100 kHz
AC
3DB
TRG
Center 915 MHz
1 s/
SWT
10 s
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
27.89 dBm
2.515026 s
1
Delta 1 [T1 ]
-0.00 dB
1.250000 s
TRG 19.6 dBm
86123JD02 DUTY CYCLE
Date: 3.SEP.2012 12:50:12
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
TRG
*
Center 915 MHz
1 ms/
3DB
RBW
100 kHz
VBW
100 kHz
SWT
10 ms
AC
*
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
27.53 dBm
-6.410256 µs
1
Delta 1 [T1 ]
-0.01 dB
6.346154 ms
TRG 25 dBm
86123JD02 TIME OF OCCUPANCY
Date: 3.SEP.2012 11:25:20
A
Att
55 dB
Offset
10.2 dB
LVL
Ref
40 dBm
*
*
RBW
100 kHz
VBW
100 kHz
SWT
10 ms
AC
3DB
1 PK
VIEW
Start
902 MHz
Stop
928 MHz
2.6 MHz/
-60
-50
-40
-30
-20
-10
0
10
20
30
40
86123JD02 NUMBER OF HOPPING FREQUENCIES
Date: 3.SEP.2012 10:21:04
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 27 of 41
Transmitter Maximum Peak Output Power
Test Summary:
Test Engineer:
Mark Percival
Test Date:
03 September 2012
Test Sample Serial No:
4
FCC Part:
15.247(b)(2)
Test Method Used:
As detailed in ANSI C63.10 Section 6.10.1 and Sections 6.3 and 6.6
referencing ANSI C63.4 (see note below)
Environmental Conditions:
Temperature (°C):
21
Relative Humidity (%):
59
Results:
Channel
Conducted
Peak Power
(dBm)
Conducted Peak
Power Limit
(dBm)
Margin
(dB)
Note
Result
Bottom
28.0
30.0
2.0
1
Complied
Middle
27.5
30.0
2.5
1
Complied
Top
26.4
30.0
3.6
1
Complied
Channel
Conducted
Peak Power
(dBm)
Declared
Antenna Gain
(dBi)
EIRP
(dBm)
De Facto
EIRP Limit
(dBm)
Margin
(dB)
Note
Result
Bottom
28.0
2.2
30.2
36.0
5.8
1
Complied
Middle
27.5
2.2
29.7
36.0
6.3
1
Complied
Top
26.4
2.2
28.6
36.0
7.4
1
Complied
Channel
EIRP
(dBm)
EIRP to ERP
Conversion
Factor
ERP
(dBm)
De Facto
ERP Limit
(dBd)
Margin
(dB)
Note
Result
Bottom
30.2
2.15
28.05
33.85
5.8
1
Complied
Middle
29.7
2.15
27.55
33.85
6.3
1
Complied
Top
28.6
2.15
26.45
33.85
7.4
1
Complied
Note(s):
1. For frequency hopping systems employing at least 50 hopping channels.
2. The radiated results are shown as ERP and EIRP for completeness.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 28 of 41
RFI Global Services Ltd
Transmitter Maximum Peak Output Power (continued)
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
Center
902.5 MHz
Span
2 MHz
200 kHz/
*
*
3DB
RBW
500 kHz
VBW
500 kHz
SWT
2.5 ms
AC
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
27.98 dBm
902.416666667 MHz
86123JD02 TX PEAK OUTPUT POWER
Date: 3.SEP.2012 13:11:10
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
Center
915 MHz
Span
2 MHz
200 kHz/
*
*
3DB
RBW
500 kHz
VBW
500 kHz
SWT
2.5 ms
AC
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
27.51 dBm
914.926282051 MHz
86123JD02 TX PEAK OUTPUT POWER
Date: 3.SEP.2012 13:08:23
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
Center
927.5 MHz
Span
2 MHz
200 kHz/
*
*
RBW
500 kHz
VBW
500 kHz
SWT
2.5 ms
AC
3DB
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
26.43 dBm
927.413461538 MHz
86123JD02 TX PEAK OUTPUT POWER
Date: 3.SEP.2012 13:12:38
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 29 of 41
Transmitter Radiated Emissions
Test Summary:
Test Engineer:
Mark Percival
Test Date:
04 September 2012
Test Sample Serial No:
4
FCC Part:
15.247(d) & 15.209(a)
Test Method Used:
As detailed in ANSI C63.10 Sections 6.3 and 6.5
referencing ANSI C63.4
Frequency Range
30 MHz to 1000 MHz
Environmental Conditions:
Temperature (°C):
23
Relative Humidity (%):
50
Results: Quasi-Peak
Frequency
(MHz)
Antenna
Polarity
Level
(dBV/m)
Limit
(dBV/m)
Margin
(dB)
Result
275.993
Vertical
34.6
46.0
11.4
Complied
987.475
Vertical
43.4
54.0
10.6
Complied
Note(s):
1. The final measured value, for the given emission, in the table above incorporates the calibrated antenna
factor and cable loss
2. The emission at 927.426 MHz shown on the 30 MHz to 1 GHz plot is the EUT fundamental.
3. The preliminary scans showed similar emission levels below 1 GHz, for each channel of operation.
Therefore final radiated emissions measurements were performed with the EUT set to the top channel
only.
4. All other emissions shown on the pre-scan plot were investigated and found to be ambient or >20 dB
below the applicable limit or below the measurement system noise floor.
5. Measurements below 1 GHz were performed in a semi-anechoic chamber (RFI Asset Number K0001) at
a distance of 3 metres. The EUT was placed at a height of 80 cm above the reference ground plane in
the centre of the chamber turntable. Maximum emission levels were determined by height searching the
measurement antenna over the range 1 metre to 4 metres.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 30 of 41
RFI Global Services Ltd
Transmitter Radiated Emissions (continued)
Note: This plot is a pre-scan and for indication purposes only. For final measurements, see accompanying table.
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
30M 50M 60M 80 M 100 M 200M 30 0M 400M 500M 800M 1G
Level in dBµV/m
Frequen cy in H z
FCC Part 15.209 Radiat ed Emissions Class B 30MHz-1GHz 3m
FCC P art 15 Cla ss B F ie ld S tre ngth Q P 3 M
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 31 of 41
Transmitter Radiated Emissions
Test Summary:
Test Engineer:
Mark Percival
Test Date:
06 September 2012
Test Sample Serial No:
4
FCC Part:
15.247(d) & 15.209(a)
Test Method Used:
As detailed in ANSI C63.10 Sections 6.3 and 6.6
referencing ANSI C63.4
Frequency Range
1 GHz to 9.30 GHz
Environmental Conditions:
Temperature (°C):
22
Relative Humidity (%):
24
Results: Peak / Bottom Channel
Frequency
(MHz)
Antenna
Polarity
Level
(dBV/m)
Limit
(dBV/m)
Margin
(dB)
Result
2707.517
Vertical
52.6
74.0
21.4
Complied
3610.297
Vertical
53.7
74.0
20.3
Complied
4513.097
Vertical
52.0
74.0
22.0
Complied
8121.743
Vertical
45.6
74.0
28.4
Complied
Results: Average / Bottom Channel
Frequency
(MHz)
Antenna
Polarity
Level
(dBV/m)
Limit
(dBV/m)
Margin
(dB)
Result
2707.617
Vertical
28.7
54.0
25.3
Complied
3610.129
Vertical
29.8
54.0
24.2
Complied
4512.517
Vertical
28.1
54.0
25.9
Complied
8122.755
Vertical
21.7
54.0
32.3
Complied
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 32 of 41
RFI Global Services Ltd
Transmitter Radiated Emissions (continued)
Results: Peak / Middle Channel
Frequency
(MHz)
Antenna
Polarity
Level
(dBV/m)
Limit
(dBV/m)
Margin
(dB)
Result
2745.279
Vertical
53.9
74.0
20.1
Complied
3660.344
Horizontal
52.3
74.0
21.7
Complied
4574.571
Vertical
47.1
74.0
26.9
Complied
8234.215
Horizontal
42.3
74.0
31.7
Complied
Results: Average / Middle Channel
Frequency
(MHz)
Antenna
Polarity
Level
(dBV/m)
Limit
(dBV/m)
Margin
(dB)
Result
2745.127
Vertical
30.0
54.0
24.0
Complied
3660.920
Vertical
28.4
54.0
25.6
Complied
4575.131
Vertical
23.2
54.0
30.8
Complied
8235.130
Horizontal
18.4
54.0
35.6
Complied
Results: Peak / Top Channel
Frequency
(MHz)
Antenna
Polarity
Level
(dBV/m)
Limit
(dBV/m)
Margin
(dB)
Result
2782.596
Vertical
53.5
74.0
20.5
Complied
3709.814
Horizontal
51.0
74.0
23.0
Complied
4638.081
Vertical
44.7
74.0
29.3
Complied
8346.484
Horizontal
42.7
74.0
31.3
Complied
Results: Average / Top Channel
Frequency
(MHz)
Antenna
Polarity
Level
(dBV/m)
Limit
(dBV/m)
Margin
(dB)
Result
2782.593
Vertical
29.6
54.0
24.4
Complied
3.710.112
Horizontal
27.1
54.0
26.9
Complied
4637.611
Vertical
20.8
54.0
33.2
Complied
8347.472
Horizontal
18.8
54.0
35.2
Complied
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 33 of 41
Transmitter Radiated Emissions (continued)
Note(s):
1. The final measured value, for the given emission, in the table above incorporates the calibrated antenna
factor and cable loss
2. All other emissions shown on the pre-scan plot were investigated and found to be ambient or >20 dB
below the applicable limit or below the measurement system noise floor.
3. Pre-scans above 1 GHz were performed in a fully anechoic chamber (RFI Asset Number K0002) at a
distance of 3 metres. The EUT was placed at a height of 1.5 metres above the test chamber floor in the
centre of the chamber turntable. All measurement antennas were placed at a fixed height of 1.5 metres
above the test chamber floor, in line with the EUT. Final measurements above 1 GHz were performed in
a semi-anechoic chamber (RFI Asset Number K0001) at a distance of 3 metres. The EUT was placed at
a height of 80 cm above the reference ground plane in the centre of the chamber turntable. Maximum
emission levels were determined by height searching the measurement antenna over the range 1 metre
to 4 metres.
4. Average levels of emissions within the restricted bands were obtained using the test method and
procedure stated in ANSI C63.10 Section 7.5. A duty cycle correction factor of -23.9 dB was used.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 34 of 41
RFI Global Services Ltd
Transmitter Radiated Emissions (continued)
A
Unit
dB
V
TDF
Start
1 GHz
Stop
2 GHz
100 MHz/
Ref Lvl
80 dB
V
Ref Lvl
80 dB
V
RBW
1 MHz
VBW
3 MHz
SWT
5 ms
RF Att
0 dB
IN1
1MA
1MAX
1MA
-10
0
10
20
30
40
50
60
70
-20
80
1
Marker 1 [T1]
52.39 dB
V
1.85571142 GHz
D1 54 dB
V
Title: 86123JD02
Comment A: RADIATED SPURIOUS EMISSIONS TX MODE TOP CHANNEL
Date: 6.SEP.2012 11:17:44
A
RF Att
0 dB
Ref Lvl
80 dB
V
Ref Lvl
80 dB
V
Unit
dB
V
TDF
Start
2 GHz
Stop
4 GHz
200 MHz/
RBW
1 MHz
VBW
3 MHz
SWT
5 ms
IN1
1MA
1VIEW
1MA
-10
0
10
20
30
40
50
60
70
-20
80
1
Marker 1 [T1]
53.98 dB
V
2.78156313 GHz
D1 54 dB
V
Title: 86123JD02
Comment A: RADIATED SPURIOUS EMISSIONS TX MODE TOP CHANNEL
Date: 6.SEP.2012 12:57:28
A
RBW
1 MHz
VBW
3 MHz
SWT
5 ms
RF Att
0 dB
IN1
1MA
Unit
dB
V
0.4 dB Offset
Ref Lvl
80 dB
V
Ref Lvl
80 dB
V
Start
4 GHz
Stop
6 GHz
200 MHz/
TDF
1VIEW
1MA
-10
0
10
20
30
40
50
60
70
-20
80
1
2
Marker 1 [T1]
43.25 dB
V
4.63727455 GHz
1 [T1] 43.25 dB
V
4.63727455 GHz
2 [T1] 46.34 dB
V
5.56713427 GHz
D1 54 dB
V
Title: 86123JD02
Comment A: RADIATED SPURIOUS EMISSIONS TX MODE TOP CHANNEL
Date: 6.SEP.2012 13:05:08
A
RBW
1 MHz
VBW
3 MHz
SWT
11.5 ms
RF Att
0 dB
IN1
1MA
Unit
dB
V
0.5 dB Offset
Ref Lvl
80 dB
V
Ref Lvl
80 dB
V
Start
6 GHz
Stop
8 GHz
200 MHz/
TDF
1VIEW
1MA
-10
0
10
20
30
40
50
60
70
-20
80
1
Marker 1 [T1]
46.70 dB
V
7.31062124 GHz
D1 54 dB
V
Title: 86123JD02
Comment A: RADIATED SPURIOUS EMISSIONS TX MODE TOP CHANNEL
Date: 6.SEP.2012 14:06:08
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 35 of 41
Transmitter Radiated Emissions (continued)
Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables.
A
Unit
dB
V
0.5 dB Offset
TDF
Start
8 GHz
Stop
9.3 GHz
130 MHz/
Ref Lvl
80 dB
V
Ref Lvl
80 dB
V
RBW
1 MHz
VBW
3 MHz
SWT
7.5 ms
RF Att
0 dB
IN1
1MA
1MAX
1MA
-10
0
10
20
30
40
50
60
70
-20
80
12
Marker 1 [T1]
41.64 dB
V
8.34909820 GHz
1 [T1] 41.64 dB
V
8.34909820 GHz
2 [T1] 41.27 dB
V
9.27715431 GHz
D1 54 dB
V
Title: 86123JD02
Comment A: RADIATED SPURIOUS EMISSIONS TX MODE TOP CHANNEL
Date: 6.SEP.2012 14:18:08
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 36 of 41
RFI Global Services Ltd
Transmitter Duty Cycle
Test Summary:
Test Engineer:
Mark Percival
Test Date:
03 September 2012
Test Sample Serial No:
4
FCC Part:
15.247(d) & 15.209(a)
Test Method Used:
As detailed in ANSI C63.10 Section 7.5
Environmental Conditions:
Temperature (°C):
21
Relative Humidity (%):
59
Results:
Total Pulse Duration (mS)
Duty Cycle (dB)
6.346154
23.9
Silent Period
(seconds)
1.250
Note(s):
1. In order to assist with the determination of the average level of fundamental and spurious emissions field
strength, measurements were made of duty cycle to determine the transmission duration and the silent
period time of the transmitter.
2. The EUT transmits a burst of 6.346 milliseconds within one 100 mS period.
3. The calculation for the duty cycle is 20 log10(6.346154/100ms) = -23.9 dB.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 37 of 41
Transmitter Duty Cycle (continued)
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
TRG
*
Center 915 MHz
1 ms/
3DB
RBW
100 kHz
VBW
100 kHz
SWT
10 ms
AC
*
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
27.53 dBm
-6.410256 µs
1
Delta 1 [T1 ]
-0.01 dB
6.346154 ms
TRG 25 dBm
86123JD02 TIME OF OCCUPANCY
Date: 3.SEP.2012 11:25:20
Ref
40 dBm
Att
55 dB
Offset
10.2 dB
A
LVL
*
RBW
100 kHz
VBW
100 kHz
AC
3DB
TRG
Center 915 MHz
1 s/
SWT
10 s
1 PK
VIEW
-60
-50
-40
-30
-20
-10
0
10
20
30
40
1
Marker 1 [T1 ]
27.89 dBm
2.515026 s
1
Delta 1 [T1 ]
-0.00 dB
1.250000 s
TRG 19.6 dBm
86123JD02 DUTY CYCLE
Date: 3.SEP.2012 12:50:12
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 38 of 41
RFI Global Services Ltd
Transmitter Band Edge Radiated Emissions
Test Summary:
Test Engineer:
Mark Percival
Test Date:
06 September 2012
Test Sample Serial No:
4
FCC Part:
15.247(d) & 15.209(a)
Test Method Used:
As detailed in ANSI C63.10 Section 6.9.2
Environmental Conditions:
Temperature (°C):
22
Relative Humidity (%):
44
Results: Static Mode
Frequency
(MHz)
Peak Level
(dBµV/m)
-20 dBc Limit
(dBµV/m)
Margin
(dB)
Result
902
91.1
101.0
9.9
Complied
928
91.2
100.3
9.1
Complied
Results: Hopping Mode
Frequency
(MHz)
Peak Level
(dBµV/m)
-20 dBc Limit
(dBµV/m)
Margin
(dB)
Result
902
89.2
101.4
12.2
Complied
928
90.7
100.3
9.6
Complied
Note(s):
1. The final measured value, for the given emissions, in the table above incorporates the calibrated
antenna factor and cable loss.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 39 of 41
Transmitter Band Edge Radiated Emissions (continued)
Lower Band Edge / Bottom Channel /
Static
Upper Band Edge / Top Channel /
Static
Lower Band Edge / Bottom Channel /
Hopping
Upper Band Edge / Top Channel /
Hopping
A
Unit
dB
V
SWT
5 ms
RBW
100 kHz
VBW
300 kHz
IN1
1MA
20.2 dB Offset
Center
902 MHz
Span
2 MHz
200 kHz/
Ref Lvl
130 dB
V
Ref Lvl
130 dB
V
RF Att
40 dB
P20
TDF
1VIEW
1MA
40
50
60
70
80
90
100
110
120
30
130
1
Marker 1 [T1]
91.07 dB
V
902.00000000 MHz
F1
D1 121 dB
V
D2 101 dB
V
Title: 86123JD02
Comment A: Radiated Band Edge
Date: 6.SEP.2012 10:12:33
A
Unit
dB
V
SWT
5 ms
RBW
100 kHz
VBW
300 kHz
IN1
1MA
20.2 dB Offset
Center
928 MHz
Span
2 MHz
200 kHz/
Ref Lvl
130 dB
V
Ref Lvl
130 dB
V
RF Att
40 dB
P20
TDF
1VIEW
1MA
40
50
60
70
80
90
100
110
120
30
130
1
Marker 1 [T1]
91.24 dB
V
928.00000000 MHz
F1
D1 120.3 dB
V
D2 100.3 dB
V
Title: 86123JD02
Comment A: Radiated Band Edge
Date: 6.SEP.2012 10:07:54
A
Unit
dB
V
SWT
5 ms
1MA
RBW
100 kHz
VBW
300 kHz
1MA
IN1
RF Att
40 dB
20.2 dB Offset
Ref Lvl
130 dB
V
Ref Lvl
130 dB
V
200 kHz/
Center
902 MHz
Span
2 MHz
P20
TDF
1MAX
40
50
60
70
80
90
100
110
120
30
130
1
Marker 1 [T1]
89.24 dB
V
902.00000000 MHz
F1
D1 121.4 dB
V
D2 101.4 dB
V
Title: 86123JD02
Comment A: Radiated Band Edge
Date: 6.SEP.2012 09:47:38
A
Unit
dB
V
SWT
5 ms
RBW
100 kHz
VBW
300 kHz
IN1
1MA
20.2 dB Offset
Center
928 MHz
Span
2 MHz
200 kHz/
Ref Lvl
130 dB
V
Ref Lvl
130 dB
V
RF Att
40 dB
P20
TDF
1VIEW
1MA
40
50
60
70
80
90
100
110
120
30
130
1
Marker 1 [T1]
90.72 dB
V
928.00000000 MHz
F1
D1 120.3 dB
V
D2 100.3 dB
V
Title: 86123JD02
Comment A: Radiated Band Edge
Date: 6.SEP.2012 09:52:27
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
Page 40 of 41
RFI Global Services Ltd
Measurement Uncertainty
No measurement or test can ever be perfect and the imperfections give rise to error of measurement in the
results. Consequently the result of a measurement is only an approximation to the value of the measurand
(the specific quantity subject to measurement) and is only complete when accompanied by a statement of
the uncertainty of the approximation.
The expression of uncertainty of a measurement result allows realistic comparison of results with reference
values and limits given in specifications and standards.
The uncertainty of the result may need to be taken into account when interpreting the measurement results.
The reported expanded uncertainties below are based on a standard uncertainty multiplied by an appropriate
coverage factor such that a confidence level of approximately 95% is maintained. For the purposes of this
document “approximately” is interpreted as meaning “effectively” or “for most practical purposes”.
Measurement Type
Range
Confidence
Level (%)
Calculated
Uncertainty
AC Conducted Spurious Emissions
0.15 MHz to 30 MHz
95%
±3.25 dB
Radiated Maximum Peak Output Power
902 MHz to 928 MHz
95%
±2.94 dB
Carrier Frequency Separation
902 MHz to 928 MHz
95%
±0.92 ppm
Average Time of Occupancy
902 MHz to 928 MHz
95%
±0.3 ns
Duty Cycle
902 MHz to 928 MHz
95%
±0.3 ns
20 dB Bandwidth
902 MHz to 928 MHz
95%
±0.92 ppm
Radiated Spurious Emissions
30 MHz to 10 GHz
95%
±2.94 dB
The methods used to calculate the above uncertainties are in line with those recommended within the
various measurement specifications. Where measurement specifications do not include guidelines for the
evaluation of measurement uncertainty the published guidance of the appropriate accreditation body is
followed.
TEST REPORT
SERIAL NO: RFI-RPT-RP86123JD02A
VERSION 4.0
ISSUE DATE: 08 MAY 2013
RFI Global Services Ltd
Page 41 of 41
Appendix 1. Test Equipment Used
RFI
No.
Instrument
Manufacturer
Type No.
Serial No.
Date
Calibration
Due
Cal.
Interval
(months)
A057
High Pass Filter
Aerial Facilities Ltd
HP-950-5N
4389B
08 Jul 2013
24
A1534
Pre Amplifier
Hewlett Packard
8449B
3008A00405
09 Oct 2012
12
A1818
Antenna
EMCO
3115
00075692
09 Oct 2012
12
A1830
Pulse Limiter
Rohde & Schwarz
ESH3-Z2
100668
25 Feb 2013
12
A1834
Attenuator
Hewlett Packard
8491B
10444
29 Jan 2013
12
A1932
High Pass Filter
Atlan TechRF
AFH-02000
20r-
JFBD04-002
15 Mar 2013
12
A228
Power Divider
Suhner Electronics
Ltd
4901/01/A
N/A
Calibrated
before use
-
A253
Antenna
Flann Microwave
12240-20
128
09 Oct 2012
12
A254
Antenna
Flann Microwave
14240-20
139
09 Oct 2012
12
A255
Antenna
Flann Microwave
16240-20
519
09 Oct 2012
12
A553
Antenna
Chase
CBL6111A
1593
15 Feb 2013
12
A649
LISN
Rohde & Schwarz
ESH3-Z5
825562/008
19 Feb 2013
12
G0543
Amplifier
Sonoma
310N
230801
15 Oct 2012
3
K0001
5m RSE
Chamber
Rainford EMC
N/A
N/A
30 Sep
2012
12
K0002
3m RSE
Chamber
Rainford EMC
N/A
N/A
09 Oct 2012
12
M1124
Spectrum
Analyser
Rohde & Schwarz
ESI26
100046K
14 Aug
2013
12
M1267
Thermal Power
Sensor
Rohde & Schwarz
NRV-Z52
100155
07 Jun 2013
12
M1269
Multimeter
Fluke
179
90250210
30 Jul 2013
12
M1273
Test Receiver
Rohde & Schwarz
ESIB 26
100275
03 Feb 2013
12
M1379
Test Receiver
Rohde & Schwarz
ESIB7
100330
20 Oct 2012
12
M1630
Test Receiver
Rohde & Schwarz
ESU40
100233
13 Jan 2013
12
M199
Power Meter
Rohde & Schwarz
NRVS
827023/075
07 Jun 2013
12
M260
Signal Generator
Rohde & Schwarz
1035.5005.02
829076/008
14 Jun 2013
12
S0537
Dual Power
Supply
TTI
EL302D
249928
Calibrated
before use
-
Download: Smart Route DataCollector Test Report Test Report Kenure Developments Ltd
Mirror Download [FCC.gov]Smart Route DataCollector Test Report Test Report Kenure Developments Ltd
Document ID1959861
Application IDZ/0/MjqKA0dkyjGaawJdqA==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize72.18kB (902212 bits)
Date Submitted2013-05-07 00:00:00
Date Available2013-05-08 00:00:00
Creation Date2013-05-08 11:28:44
Producing SoftwareMicrosoft Word 2010
Document Lastmod2013-05-08 11:29:46
Document TitleTest Report
Document CreatorMicrosoft Word 2010
Document Author: David Doyle

Facebook Twitter Google+ RSS © FCCID.io 2017