Mobile Phone RF Exposure Info - E52016B0002 Fujitsu Mobile Phone_F-04J _SALVIA_ FCC SAR Report Fujitsu Limited

Fujitsu Limited Mobile Phone

See More Details For FCC ID: VQK-F04J
Purchase on Amazon: Mobile Phone
Download: Mobile Phone RF Exposure Info - E52016B0002 Fujitsu Mobile Phone_F-04J _SALVIA_ FCC SAR Report Fujitsu Limited
Document DescriptionTest Report_SAR
Document TypeRF Exposure Info
Document TitleMicrosoft Word - E52016B0002 Fujitsu Mobile Phone_F-04J _SALVIA_ FCC SAR Report

Document

Trouble Loading? Try Mobile Phone RF Exposure Info - E52016B0002 Fujitsu Mobile Phone_F-04J _SALVIA_ FCC SAR Report Fujitsu Limited Downloading this document. Zoom In and Out With ⌘ / Ctrl key and plus [+] or minus [-]
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 1 of 130
SAR TEST REPORT
The following samples were submitted and identified on behalf of the client as:
Equipment Under Test Mobile Phone
Brand Name FUJITSU
Model No. F-04J
Company Name Fujitsu Limited
Company Address 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki
211-8588, Japan
Standards IEEE/ANSI C95.1-1992, IEEE 1528-2013,
KDB248227D01v02r02,KDB865664D01v01r04,
KDB865664D02v01r02,KDB941225D01v03r01,
KDB941225D06v02r01,KDB447498D01v06,
KDB648474D04v01r03,
FCC ID VQK-F04J
Date of Receipt Nov. 07, 2016
Date of Test(s) Nov. 22, 2016 ~ Nov. 25, 2016
Date of Issue Jan. 04, 2017
In the configuration tested, the EUT complied with the standards specified above.
Remarks:
This report details the results of the testing carried out on two sample, the results contained in this test
report do not relate to other samples of the same product. The manufacturer should ensure that all products in
series production are in conformity with the product sample detailed in this report.
This report may only be reproduced and distributed in full. If the product in this report is used in any
configuration other than that detailed in the report, the manufacturer must ensure the new system complies
with all relevant standards. Any mention of SGS Taiwan Electronic & Communication Laboratory or testing
done by SGS Taiwan Electronic & Communication Laboratory in connection with distribution or use of the
product described in this report must be approved by SGS Taiwan Electronic & Communication Laboratory in
writing.
Signed on behalf of SGS
Engineer Supervisor
Matt Kuo
John Yeh
Date: Jan. 04, 2017 Date: Jan. 04, 2017
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 2 of 130
Revision History
Report Number Revision Description Issue Date
E5/2016/B0002 Rev.00 Initial creation of document Dec. 12, 2016
E5/2016/B0002 Rev.01 1st modification Dec. 13, 2016
E5/2016/B0002 Rev.02 2nd modification Dec. 14, 2016
E5/2016/B0002 Rev.03 3rd modification Dec. 15, 2016
E5/2016/B0002 Rev.04 4th modification Jan. 04, 2017
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 3 of 130
Contents
1. General Information ....................................................................................................... 4
1.1 Testing Laboratory ............................................................................................................... 4
1.2 Details of Applicant .............................................................................................................. 4
1.3 Description of EUT .............................................................................................................. 5
1.4 Test Environment .............................................................................................................. 15
1.5 Operation Description ....................................................................................................... 15
1.6 Positioning Procedure ....................................................................................................... 18
1.7 Evaluation Procedures ...................................................................................................... 20
1.8 Probe Calibration Procedures ........................................................................................... 22
1.9 The SAR Measurement System ........................................................................................ 25
1.10 System Components ....................................................................................................... 27
1.11 SAR System Verification ................................................................................................. 29
1.12 Tissue Simulant Fluid for the Frequency Band ............................................................... 31
1.13 Test Standards and Limits ............................................................................................... 33
2. Summary of Results .................................................................................................... 35
3. Simultaneous Transmission Analysis ........................................................................ 39
3.1 Estimated SAR calculation ................................................................................................ 40
3.2 SPLSR evaluation and analysis ........................................................................................ 40
4. Instruments List ........................................................................................................... 44
5. Measurements .............................................................................................................. 46
6. SAR System Performance Verification ...................................................................... 63
7. DAE & Probe Calibration Certificate .......................................................................... 75
8. Uncertainty Budget ...................................................................................................... 91
9. Phantom Description ................................................................................................... 93
10. System Validation from Original Equipment Supplier ............................................ 94
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 4 of 130
1. General Information
1.1 Testing Laboratory
SGS Taiwan Ltd. Electronics & Communication Laboratory
No.134, Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei
City, Taiwan
Tel +886-2-2299-3279
Fax +886-2-2298-0488
Internet http://www.tw.sgs.com/
1.2 Details of Applicant
Company Name Fujitsu Limited
Company Address 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki
211-8588, Japan
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 5 of 130
1.3 Description of EUT
EUT Name Mobile Phone
Brand Name FUJITSU
Model No. F-04J
FCC ID VQK-F04J
IMEI code WWAN : 353223080014872
WLAN : 353223080011720
Mode of Operation
GSM GPRS
WCDMA HSDPA HSUPA
WLAN802.11 a/b/g/n(20M/40M)/ac(20M/40M/80M)
Bluetooth
Duty Cycle
GSM 1/8.3
GPRS
1/2 (1Dn4UP)
1/2.76 (1Dn3UP)
1/4.1 (1Dn2UP)
1/8.3 (1Dn1UP)
WCDMA 1
WLAN802.11 a/b/g/n(20M/40M)/
ac(20M/40M/80M) 1
Bluetooth 1
TX Frequency Range
(MHz)
GSM 850 824 849
GSM 1900 1850 1910
WCDMA Band V 824 849
WLAN802.11 b/g/n(20M) 2412 2462
WLAN802.11 a/n(20M)/ac(20M) 5.2G 5180 5240
WLAN802.11 n(40M)/ac(40M) 5.2G 5190 5230
WLAN802.11 ac(80M) 5.2G 5210
WLAN802.11 a/n(20M)/ac(20M) 5.3G 5260 5320
WLAN802.11 n(40M)/ac(40M) 5.3G 5270 5310
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 6 of 130
TX Frequency Range
(MHz)
WLAN802.11 ac(80M) 5.3G 5290
WLAN802.11 a/n/ac(20M) 5.6G 5500 5720
WLAN802.11 n/ac(40M) 5.6G 5510 5710
WLAN802.11 ac(80M) 5.6G 5530 5690
Bluetooth 2402 2480
Channel Number
(ARFCN)
GSM 850 128 251
GSM 1900 512 810
WCDMA Band V 4132 4233
WLAN802.11 b/g/n(20M) 1 11
WLAN802.11 a/n(20M)/ac(20M) 5.2G 36 48
WLAN802.11 n(40M)/ac(40M) 5.2G 38 46
WLAN802.11 ac(80M) 5.2G 42
WLAN802.11 a/n(20M)/ac(20M) 5.3G 52 64
WLAN802.11 n(40M)/ac(40M) 5.3G 54 62
WLAN802.11 ac(80M) 5.3G 58
WLAN802.11 a/n/ac(20M) 5.6G 100 144
WLAN802.11 n/ac(40M) 5.6G 102 142
WLAN802.11 ac(80M) 5.6G 106 138
Bluetooth 0 78
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 7 of 130
Max. SAR (1 g) (Unit: W/kg)
Mode Band Measured Reported Position / Channel
Head
GSM 850 0.114 0.130 Left Right
Cheek Tilt
251 Channel
GSM 1900 0.310 0.374 Left Right
Cheek Tilt
512 Channel
WCDMA Band V 0.182 0.190 Left Right
Cheek Tilt
4233 Channel
WLAN802.11 b 0.065 0.087 Left Right
Cheek Tilt
6 Channel
WLAN802.11 ac(80M)
5.2G 0.135 0.155 Left Right
Cheek Tilt
42 Channel
WLAN802.11 ac(80M)
5.3G 0.098 0.111 Left Right
Cheek Tilt
58 Channel
WLAN802.11 ac(80M)
5.6G 0.095 0.111 Left Right
Cheek Tilt
138 Channel
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 8 of 130
Max. SAR (1 g) (Unit: W/kg)
Mode Band Measured Reported Position / Channel
Body-worn
GSM 850 0.571 0.653 Front Back
251 Channel
GSM 1900 0.502 0.605 Front Back
512 Channel
Bluetooth (GFSK) 0.019 0.024 Front Back
0 Channel
WLAN802.11 ac(80M)
5.2G 0.072 0.083 Front Back
42 Channel
WLAN802.11 ac(80M)
5.3G 0.059 0.067 Front Back
58 Channel
WLAN802.11 ac(80M)
5.6G 0.027 0.032 Front Back
138 Channel
Max. SAR (1 g) (Unit: W/kg)
Mode Band Measured Reported Position / Channel
Hotspot
mode
GPRS 850
(1Dn2UP) 0.554 0.632
Front Back
Bottom Right
Left
251 Channel
GPRS 1900
(1Dn4UP) 0.399 0.448
Front Back
Bottom Right
Left
810 Channel
WCDMA Band V 0.755 0.901
Front Back
Bottom Right
Left
4132 Channel
WLAN802.11 b 0.057 0.077
Front Back
Bottom Right
Left
6 Channel
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 9 of 130
GSM/GPRS conducted power (Unit: dBm) table:
Burst
average
power
Source
-based
time
average
p
owe
r
Avg.
(
dBm
)
Avg.
(
dBm
)
824.2 128 33 32.21 23.18
836.6 190 33 32.36 23.33
848.8 251 33 32.42 23.39
Division factor 1 TX time slot
-9.03
EUT mode Frequency
(MHz) CH
Max.
Rated
Avg.
Power +
Max.
Tolerance
(
dBm
)
GSM850
(GMSK)
The division factor compared to the number of TX time slot
EUT mode Frequency
(
MHz
)
CH
824.2 128
836.6 190
848.8 251
824.2 128
836.6 190
848.8 251
32.21
32.36
1Dn2UP 1Dn3UP
32.42
Avg.
(
dBm
)
29.38
29.34
29.43
30 28 26.5
2 TX time slot 3 TX time slot 4 TX time slot
Avg.
(
dBm
)
1Dn4UP
Avg.
(
dBm
)
Avg.
(
dBm
)
Burst average power
1Dn1UP
GPRS
850
Source-based time average power
GPRS
850
Max. Rated Avg. Power +
Max. Tolerance (dBm) 33
27.45
27.53
Division factor -9.03 -6.02 -4.26 -3.01
The division factor compared to the number of TX time slot
1 TX time slot
26.25
26.23
26.31
27.56
23.24
23.22
23.3023.39
23.36
23.32
23.41
23.30
23.19
23.27
23.18
23.33
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 10 of 130
Burst
average
power
Source
-based
time
average
p
ower
Avg.
(
dBm
)
Avg.
(
dBm
)
1850.2 512 30 29.19 20.16
1800 661 30 29.17 20.14
1909.8 810 30 29.08 20.05
Division factor 1 TX time slot
-9.03
EUT mode Frequency
(MHz) CH
Max.
Rated
Avg.
Power +
Max.
Tolerance
(
dBm
)
GSM1900
(GMSK)
The division factor compared to the number of TX time slot
EUT mode Frequency
(
MHz
)
CH
1850.2 512
1880 661
1909.8 810
1850.2 512
1880 661
1909.8 810
20.30
20.38
20.34
20.33
20.43
20.38
20.38
20.49
Division factor
24.59
24.69
Avg.
(
dBm
)
23.39
23.39
23.50
Avg.
(
dBm
)
24.60
20.16
GPRS
1900
Source-based time average power
26.32
26.40
GPRS
1900 29.17
29.08
20.14
20.05
20.32
1 TX time slot 2 TX time slot 3 TX time slot 4 TX time slot
-9.03-6.02-4.26-3.01
26.34
Avg.
(
dBm
)
29.19
Burst average power
The division factor compared to the number of TX time slot
1Dn1UP 1Dn2UP 1Dn3UP 1Dn4UP
Max. Rated Avg. Power +
Max. Tolerance (dBm) 30 26.5 25 24
Avg.
(
dBm
)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 11 of 130
WCDMA Band V - HSDPA / HSUPA conducted power (Unit: dBm) table:
4132 4183 4233
826.4 836.6 846.6
3GPP Rel 99 RMC 12.2Kbps 23.73 23.93 24.32
3GPP Rel 6 HSDPA Subtest-1 22.92 22.83 23.06
3GPP Rel 6 HSDPA Subtest-2 22.91 22.84 23.19
3GPP Rel 6 HSDPA Subtest-3 22.41 22.43 22.68
3GPP Rel 6 HSDPA Subtest-4 22.41 22.44 22.69
3GPP Rel 6 HSUPA Subtest-1 22.88 22.81 23.17
3GPP Rel 6 HSUPA Subtest-2 22.48 22.39 22.64
3GPP Rel 6 HSUPA Subtest-3 22.89 22.92 23.31
3GPP Rel 6 HSUPA Subtest-4 22.87 22.91 23.14
3GPP Rel 6 HSUPA Subtest-5 22.88 22.92 23.18
Band WCDMA V
TX Channel
Frequency (MHz)
Tune-up limit 24.5
HSDPA
HSUPA
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 12 of 130
WLAN802.11 a/b/g/n/ac(20M/40M/80M) conducted power (Unit: dBm) table:
Mode Channel Frequency
(MHz) Data Rate Tune-up limit
(dBm)
Average power
(dBm)
1 2412 13.5 13.01
6 2437 13.5 12.22
11 2462 13.5 13.12
1 2412 13 12.75
6 2437 13 12.65
11 2462 13 12.76
1 2412 13 12.80
6 2437 13 12.66
11 2462 13 12.70
2.4GHz WLAN
802.11b 1Mbps
802.11g 6Mbps
802.11n-HT20 MCS0
Mode Channel Frequency
(MHz) Data Rate Tune-up limit
(dBm)
Average power
(dBm)
36 5180 13 12.61
40 5200 13 12.60
44 5220 13 12.25
48 5240 13 12.62
36 5180 13 12.75
40 5200 13 12.47
44 5220 13 12.53
48 5240 13 12.77
36 5180 13 12.68
40 5200 13 12.37
44 5220 13 12.41
48 5240 13 12.56
38 5190 13 12.59
46 5230 13 12.72
38 5190 13 12.56
46 5230 13 12.27
802.11n-VHT80 42 5210 MCS0 13 12.39
MCS0
802.11a 6Mbps
802.11n-HT20 MCS0
802.11n-VHT20 MCS0
5.2GHz WLAN
802.11n-HT40
802.11n-VHT40 MCS0
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 13 of 130
Mode Channel Frequency
(MHz) Data Rate Tune-up limit
(dBm)
Average power
(dBm)
52 5260 13 12.56
56 5280 13 12.52
60 5300 13 12.30
64 5320 13 12.17
52 5260 13 12.60
56 5280 13 12.52
60 5300 13 12.43
64 5320 13 12.53
52 5260 13 12.39
56 5280 13 12.33
60 5300 13 12.22
64 5320 13 12.32
54 5270 13 12.65
62 5310 13 12.53
54 5270 13 12.42
62 5310 13 12.25
802.11n-VHT80 58 5290 MCS0 13 12.46
5.3GHz WLAN
802.11a 6Mbps
802.11n-HT20 MCS0
802.11n-VHT40 MCS0
802.11n-VHT20 MCS0
802.11n-HT40 MCS0
Mode Channel Frequency
(MHz) Data Rate Tune-up limit
(dBm)
Average power
(dBm)
100 5500 12.5 12.02
120 5600 12.5 11.90
140 5700 12.5 11.65
100 5500 12.5 12.03
120 5600 12.5 12.01
124 5620 12.5 12.00
128 5640 12.5 11.93
140 5700 12.5 11.85
100 5500 12.5 11.82
120 5600 12.5 11.89
124 5620 12.5 11.81
128 5640 12.5 11.62
140 5700 12.5 11.64
102 5510 12.5 12.18
118 5590 12.5 12.03
126 5630 12.5 11.94
134 5670 12.5 11.98
102 5510 12.5 12.08
118 5590 12.5 12.17
126 5630 12.5 12.03
134 5670 12.5 11.68
106 5530 12.5 11.77
122 5610 12.5 11.72
138 5690 12.5 11.82
5.6GHz WLAN
802.11a 6Mbps
802.11n-HT20 MCS0
802.11n-VHT80 MCS0
802.11n-VHT40 MCS0
802.11n-HT40 MCS0
802.11n-VHT20 MCS0
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 14 of 130
Bluetooth conducted power (Unit: dBm) table:
1Mbps 2Mbps 3Mbps
0 2402 8.917.007.02
39 2441 8.30 6.29 6.31
78 2480 8.40 6.55 6.64
BR/EDR
Mode Channel
Frequency(MHz)
Average power (dBm)
10
Avg. Tune-up limit (dBm)
02402
20 2442
39 2480
Mode
BLE
0.66
-0.21
0.07
Channel
Frequency(MHz)
Average power (dBm)
GFSK
Avg. Tune-up limit (dBm) 2
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 15 of 130
1.4 Test Environment
Ambient Temperature: 22±2° C
Tissue Simulating Liquid: 22±2° C
1.5 Operation Description
1. The EUT is controlled by using a Radio Communication Tester (Anritsu
MT8820C), and the communication between the EUT and the tester is established
by air link.
2. Measurements are performed respectively on the lowest, middle and highest
channels of the operating band(s). The EUT is set to maximum power level during
all tests, and at the beginning of each test the battery is fully charged.
3. During the SAR testing, the DASY 5 system checks power drift by comparing the
e-field strength of one specific location measured at the beginning with that
measured at the end of the SAR testing.
4. The device doesn’t support EDGE.
5. SAR test reduction for GPRS and EDGE modes is determined by the
source-based time-averaged output power. The data mode with highest specified
time-averaged output power should be tested for SAR compliance. The GMSK
EDGE configurations are grouped with GPRS and considered with respect to
time-averaged maximum output power to determine compliance. The 3G SAR test
reduction procedure is applied to 8-PSK EDGE with GMSK GPRS/EDGE as the
primary mode. Since the maximum output power in a secondary mode (8-PSK
EDGE) is ¼ dB higher than the primary mode (GMSK GPRS/EDGE), SAR
measurement is not required for the secondary mode (8-PSK EDGE).
6. The 3G SAR test reduction procedure is applied to HSDPA with 12.2 kbps RMC
as the primary mode. Since the maximum output power in a secondary mode
(HSDPA) is ¼ dB higher than the primary mode (WCDMA), SAR measurement is
not required for the secondary mode (HSDPA).
7. The 3G SAR test reduction procedure is applied to HSPA (HSUPA/HSDPA with
RMC) with 12.2 kbps RMC as the primary mode. Since the maximum output power
in a secondary mode (HSPA) is ¼ dB higher than the primary mode (WCDMA),
SAR measurement is not required for the secondary mode (HSPA).
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 16 of 130
WLAN
802.11b DSSS SAR Test Requirements:
8. SAR is measured for 2.4 GHz 802.11b DSSS mode using the highest measured
maximum output power channel, when the reported SAR of the highest measured
maximum output power channel for the exposure configuration is 0.8 W/kg, no
further SAR testing is required for 802.11b DSSS in that exposure configuration.
9. When the reported SAR is > 0.8 W/kg, SAR is required for that exposure
configuration using the next highest measured output power channel. When any
reported SAR is > 1.2 W/kg, SAR is required for the third channel; i.e., all channels
require testing.
802.11g/n OFDM SAR Test Exclusion Requirements:
10. SAR is not required for 802.11g/n since the highest reported SAR for DSSS is
adjusted by the ratio of OFDM to DSSS specified maximum output power and the
adjusted SAR is 1.2 W/kg.
Initial Test Configuration:
11. An initial test configuration is determined for OFDM transmission modes
according to the channel bandwidth, modulation and data rate combination(s) with
the highest maximum output power specified for production units in each
standalone and aggregated frequency band.
12. SAR is measured using the highest measured maximum output power channel.
When the reported SAR of the initial test configuration is > 0.8 W/kg, SAR
measurement is required for the subsequent next highest measured output power
channel(s) in the initial test configuration until the reported SAR is 1.2 W/kg or all
required channels are tested.
13. For WLAN, 5.2ac(80)/5.3ac(80)/5.6ac(80) is chosen to be the initial test
configurations.
14. For WLAN, since the highest reported SAR for the initial test configuration is
adjusted by the ratio of the subsequent test configuration to initial test
configuration specified maximum output power and the adjusted SAR is 1.2 W/kg,
SAR is not required for subsequent test configurations.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 17 of 130
Other
15. BT and WLAN use the same antenna path and Bluetooth can’t transmit
simultaneously with WLAN.
16. According to KDB447498D01v06, testing of other required channels is not
required when the reported 1-g SAR for the highest output channel is 0.8 W/kg,
when the transmission band is 100MHz.
17. According to KDB865664D01v01r04, SAR measurement variability must be
assessed for each frequency band. When the original highest measured SAR is
0.8 W/kg, repeated that measurement once. Perform a second repeated
measurement only if the ratio of largest to smallest SAR for the original and first
repeated measurements is > 1.20 or when the original or repeated measurement
is 1.45 W/kg (~ 10% from the 1-g SAR limit)
18. According to KDB447498D01v06 – The 1-g and 10-g SAR test exclusion
thresholds for 100 MHz to 6 GHz at test separation distances 50 mm are
determined by: [(max. power of channel, including tune-up tolerance, mW)/(min.
test separation distance, mm)] · [f(GHz)] 3.0 for 1-g SAR, and 7.5 for product
specific 10-g SAR.
mode position max. power
(dB)
max. power
(mW) f(GHz) calculation
SAR
exclusion
threshold
SAR test
exclusion
BT body-worn 10 10 2.48 1.575 3 Yes
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 18 of 130
1.6 Positioning Procedure
Head SAR measurement statement
Phone position 1, “cheek” or “touch” position. The reference points for the right ear
(RE), left ear (LE) and mouth (M), which define the reference plane for phone
positioning.
Phone position 2, “tilted position.” The reference points for the right ear (RE), left ear
(LE) and mouth (M), which define the reference plane for phone positioning.
Cheek/Touch Position:
The handset was brought toward the mouth of the head phantom by pivoting against
the ear reference point until any point of the mouthpiece or keypad touched the
phantom.
Ear/Tilt Position:
With the phone aligned in the Cheek/Touch position, the handset was tilted away from
the mouth with respect to the test device reference point by 15 degrees.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 19 of 130
Body SAR measurement statement
1. Body-worn exposure: 10mm
Body-worn accessory exposure is typically related to voice mode operations when
handsets are carried in body-worn accessories. The body-worn accessory
procedures in KDB Publication 447498 D01 should be used to test for body-worn
accessory SAR compliance, without a headset connected to it. When the same
wireless transmission configuration is used for testing body-worn accessory and
hotspot mode SAR, respectively, in voice and data mode, SAR results for the most
conservative test separation distance configuration may be used to support both
SAR conditions. When the reported SAR for a body-worn accessory, measured
without a headset connected to the handset, is > 1.2 W/kg, the highest reported
SAR configuration for that wireless mode and frequency band should be repeated
for the body-worn accessory with a headset attached to the handset.
2. Hotspot exposure: 10mm
A test separation distance of 10 mm is required between the phantom and all
surfaces and edges with a transmitting antenna located within 25 mm from that
surface or edge when the form factor of a handset is larger than 9 cm × 5 cm,
Test configurations of WWAN
(1) Front side
(2) Back side
(3) Bottom side.
(4) Right side.
(5) Left side.
Test configurations of WLAN
(1) Front side
(2) Back side
(3) Top side.
(4) Left side
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 20 of 130
1.7 Evaluation Procedures
The entire evaluation of the spatial peak values is performed within the
Post-processing engine (SEMCAD). The system always gives the maximum values
for the 1 g and 10 g cubes. The algorithm to find the cube with highest averaged SAR
is divided into the following stages:
1. The extraction of the measured data (grid and values) from the Zoom Scan.
2. The calculation of the SAR value at every measurement point based on all stored
data (A/D values and measurement parameters).
3. The generation of a high-resolution mesh within the measured volume.
4. The interpolation of all measured values from the measurement grid to the
high-resolution grid.
5. The extrapolation of the entire 3-D field distribution to the phantom surface over
the distance from sensor to surface.
6. The calculation of the averaged SAR within masses of 1g and 10g.
The probe is calibrated at the center of the dipole sensors that is located 1 to 2.7mm
away from the probe tip. During measurements, the probe stops shortly above the
phantom surface, depending on the probe and the surface detecting system. Both
distances are included as parameters in the probe configuration file. The software
always knows exactly how far away the measured point is from the surface. As the
probe cannot directly measure at the surface, the values between the deepest
measured point and the surface must be extrapolated. The angle between the probe
axis and the surface normal line is less than 30 degree.
In the Area Scan, the gradient of the interpolation function is evaluated to find all the
extreme of the SAR distribution. The uncertainty on the locations of the extreme is
less than 1/20 of the grid size. Only local maximum within –2 dB of the global
maximum are searched and passed for the Cube Scan measurement. In the Cube
Scan, the interpolation function is used to extrapolate the Peak SAR from the lowest
measurement points to the inner phantom surface (the extrapolation distance). The
uncertainty increases with the extrapolation distance. To keep the uncertainty within
1% for the 1 g and 10 g cubes, the extrapolation distance should not be larger than
5mm.
The maximum search is automatically performed after each area scan measurement.
It is based on splines in two or three dimensions. The procedure can find the
maximum for most SAR distributions even with relatively large grid spacing. After the
area scanning measurement, the probe is automatically moved to a position at the
interpolated maximum. The following scan can directly use this position for reference,
e.g., for a finer resolution grid or the cube evaluations. The 1g and 10g peak
evaluations are only available for the predefined cube 7x7x7 scans.
The routines are verified and optimized for the grid dimensions used in these cube
measurements. The measured volume of 30x30x30mm contains about 30g of tissue.
The first procedure is an extrapolation (incl. Boundary correction) to get the points
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 21 of 130
between the lowest measured plane and the surface. The next step uses 3D
interpolation to get all points within the measured volume. In the last step, a 1g cube is
placed numerically into the volume and its averaged SAR is calculated. This cube is
the moved around until the highest averaged SAR is found.
If the highest SAR is found at the edge of the measured volume, the system will issue
a warning: higher SAR values might be found outside of the measured volume. In that
case the cube measurement can be repeated, using the new interpolated maximum
as the center.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 22 of 130
1.8 Probe Calibration Procedures
For the calibration of E-field probes in lossy liquids, an electric field with an accurately
known field strength must be produced within the measured liquid. For
standardization purposes it would be desirable if all measurements which are
necessary to assess the correct field strength would be traceable to standardized
measurement procedures. In the following two different calibration techniques are
summarized:
1.8.1 Transfer Calibration with Temperature Probes
In lossy liquids the specific absorption rate (SAR) is related both to the electric
field (
) and the temperature gradient (
T
/
t
) in the liquid.
t
T
c SAR
2
Whereby σ is the conductivity, ρ the density and c the heat capacity of the liquid.
Hence, the electric field in lossy liquid can be measured indirectly by measuring
the temperature gradient in the liquid. Non-disturbing temperature probes
(optical probes or thermistor probes with resistive lines) with high spatial
resolution (<1-2 mm) and fast reaction time (<1 s) are available and can be
easily calibrated with high precision [1]. The setup and the exciting source have
no influence on the calibration; only the relative positioning uncertainties of the
standard temperature probe and the E-field probe to be calibrated must be
considered. However, several problems limit the available accuracy of probe
calibrations with temperature probes:
1. The temperature gradient is not directly measurable but must be evaluated
from temperature measurements at different time steps. Special precaution is
necessary to avoid measurement errors caused by temperature gradients due
to energy equalizing effects or convection currents in the liquid. Such effects
cannot be completely avoided, as the measured field itself destroys the
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 23 of 130
thermal equilibrium in the liquid. With a careful setup these errors can be kept
small.
2. The measured volume around the temperature probe is not well defined. It is
difficult to calculate the energy transfer from a surrounding gradient
temperature field into the probe. These effects must be considered, since
temperature probes are calibrated in liquid with homogeneous temperatures.
There is no traceable standard for temperature rise measurements.
3. The calibration depends on the assessment of the specific density, the heat
capacity and the conductivity of the medium. While the specific density and
heat capacity can be measured accurately with standardized procedures (~
2% for c; much better for ρ), there is no standard for the measurement of the
conductivity. Depending on the method and liquid, the error can well exceed
±5%.
4. Temperature rise measurements are not very sensitive and therefore are
often performed at a higher power level than the E-field measurements. The
nonlinearities in the system (e.g., power measurements, different components,
etc.) must be considered.
Considering these problems, the possible accuracy of the calibration of E-field
probes with temperature gradient measurements in a carefully designed setup is
about ±10% (RSS) [2]. Recently, a setup which is a combination of the
waveguide techniques and the thermal measurements was presented in [3]. The
estimated uncertainty of the setup is ±5% (RSS) when the same liquid is used for
the calibration and for actual measurements and ±7-9% (RSS) when not, which
is in good agreement with the estimates given in [2].
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 24 of 130
1.8.2 Calibration with Analytical Fields
In this method a technical setup is used in which the field can be calculated
analytically from measurements of other physical magnitudes (e.g., input power).
This corresponds to the standard field method for probe calibration in air;
however, there is no standard defined for fields in lossy liquids.
When using calculated fields in lossy liquids for probe calibration, several points
must be considered in the assessment of the uncertainty:
1. The setup must enable accurate determination of the incident power.
2. The accuracy of the calculated field strength will depend on the assessment
of the dielectric parameters of the liquid.
3. Due to the small wavelength in liquids with high permittivity, even small setups
might be above the resonant cutoff frequencies. The field distribution in the
setup must be carefully checked for conformity with the theoretical field
distribution.
References
(1) N. Kuster, Q. Balzano, and J.C. Lin, Eds., Mobile Communications Safety,
Chapman & Hall, London, 1997.
(2) K. Meier, M. Burkhardt, T. Schmid, and N. Kuster, \Broadband calibration of
E-field probes in lossy media", IEEE Transactions on Microwave Theory and
Techniques, vol. 44, no. 10, pp. 1954{1962, Oct. 1996.
(3) K. Jokela, P. Hyysalo, and L. Puranen, \Calibration of specific absorption
rate (SAR) probes in waveguide at 900 MHz", IEEE Transactions on
Instrumentation and Measurements, vol. 47, no. 2, pp. 432{438, Apr. 1998.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 25 of 130
1.9 The SAR Measurement System
A block diagram of the SAR measurement system is given in Fig. a. This SAR
measurement system uses a Computer-controlled 3-D stepper motor system (SPEAG
DASY 5 professional system). Model EX3DV4 field probes are used to determine the
internal electric fields. The SAR can be obtained from the equation SAR= σ (|Ei|2)/ ρ
where σ and ρ are the conductivity and mass density of the tissue-simulant.
Fig. a A block diagram of the SAR measurement system
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 26 of 130
The DASY 5 system for performing compliance tests consists of the following items:
1. A standard high precision 6-axis robot (Staubli RX family) with controller, teach
pendant and software. An arm extension is for accommodating the data acquisition
electronics (DAE).
2. A dosimetric probe, i.e., an isotropic E-field probe optimized and calibrated for
usage in tissue simulating liquid. The probe is equipped with an optical surface
detector system.
3. Data acquisition electronics (DAE) which performs the signal amplification, signal
multiplexing, AD-conversion, offset measurements, mechanical surface detection,
collision detection, etc. The unit is battery powered with standard or rechargeable
batteries. The signal is optically transmitted to the EOC.
4. The Electro-optical converter (EOC) performs the conversion between optical and
electrical of the signals for the digital communication to the DAE and for the analog
signal from the optical surface detection. The EOC is connected to the
measurement server.
5. The function of the measurement server is to perform the time critical tasks such as
signal filtering, control of the robot operation and fast movement interrupts.
6. A probe alignment unit which improves the (absolute) accuracy of the probe
positioning.
7. A computer operating Windows7
8. DASY 5 software.
9. Remote control with teach pendant and additional circuitry for robot safety such as
warning lamps, etc.
10. The SAM twin phantom enabling testing left-hand and right-hand usage.
11. The device holder for handheld mobile phones.
12. Tissue simulating liquid mixed according to the given recipes.
13. Validation dipole kits allowing to validate the proper functioning of the system.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 27 of 130
1.10 System Components
EX3DV4 E-Field Probe
Construction Symmetrical design with triangular core
Built-in shielding against static charges
PEEK enclosure material (resistant to
organic solvents, e.g., DGBE)
Calibration Basic Broad Band Calibration in air
Conversion Factors (CF) for
HSL835/1900/2450/5200/5300/5600MHz
Additional CF for other liquids and
frequencies upon request
Frequency 10 MHz to > 6 GHz, Linearity: ± 0.6 dB
Directivity ± 0.3 dB in HSL (rotation around probe axis)
± 0.5 dB in tissue material (rotation normal to probe axis)
Dynamic
Range
10 µW/g to > 100 mW/g
Linearity: ± 0.2 dB (noise: typically < 1 µW/g)
Dimensions Tip diameter: 2.5 mm
Application High precision dosimetric measurements in any exposure scenario
(e.g., very strong gradient fields). Only probe which enables
compliance testing for frequencies up to 6 GHz with precision of
better 30%.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 28 of 130
SAM PHANTOM V4.0C
Construction: The shell corresponds to the specifications of the Specific
Anthropomorphic Mannequin (SAM) phantom defined in IEEE 1528
and IEC 62209.
It enables the dosimetric evaluation of left and right hand phone
usage as well as body mounted usage at the flat phantom region. A
cover prevents evaporation of the liquid. Reference markings on the
phantom allow the complete setup of all predefined phantom
positions and measurement grids by manually teaching three points
with the robot.
Shell
Thickness:
2 ± 0.2 mm
Filling
Volume:
Approx. 25 liters
Dimensions: Height: 850 mm;
Length: 1000 mm;
Width: 500 mm
DEVICE HOLDER
Construction In combination with the Twin SAM Phantom
V4.0/V4.0C or Twin SAM, the Mounting
Device (made from POM) enables the
rotation of the mounted transmitter in
spherical coordinates, whereby the rotation
point is the ear opening. The devices can
be easily and accurately positioned
according to IEC, IEEE, CENELEC, FCC or
other specifications. The device holder can
be locked at different phantom locations
(left head, right head, flat phantom).
Device Holder
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 29 of 130
1.11 SAR System Verification
The microwave circuit arrangement for system verification is sketched in Fig. b. The
daily system accuracy verification occurs within the flat section of the SAM phantom.
A SAR measurement was performed to see if the measured SAR was within +/- 10%
(according to KDB865664D01v01r04) from the target SAR values.
These tests were done at 835/1900/2450/5200/5300/5600 MHz. The tests were
conducted on the same days as the measurement of the DUT. The obtained results
from the system accuracy verification are displayed in the table 1. During the tests,
the ambient temperature of the laboratory was 21.7°C, the relative humidity was 62%
and the liquid depth above the ear reference points was above 15 cm (3G) or 10 cm
(>3G) in all the cases. It is seen that the system is operating within its specification,
as the results are within acceptable tolerance of the reference values.
Fig. b The block diagram of system verification
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 30 of 130
Validation
Kit S/N
1W Target
SAR-1g
(mW/g)
Measured
SAR-1g
(mW/g)
Measured
SAR-1g
normalized to
1W
(
mW/
g)
Deviation
(%)
Measured
Date
Head 9.40 2.33 9.32 -0.85% Nov. 22, 2016
Body 9.57 2.56 10.24 7.00% Nov. 24, 2016
Head 38.7 9.56 38.24 -1.19% Nov. 22, 2016
Body 39.7 10.10 40.4 1.76% Nov. 24, 2016
Head 51.0 12.9 51.6 1.18% Nov. 22, 2016
Body 49.6 12.1 48.4 -2.42% Nov. 25, 2016
Head 77.0 7.71 77.1 0.13% Nov. 23, 2016
Body 71.9 7.53 75.3 4.73% Nov. 25, 2016
Head 79.9 8.28 82.8 3.63% Nov. 23, 2016
Body 75.1 7.78 77.8 3.60% Nov. 25, 2016
Head 82.6 8.4 84 1.69% Nov. 23, 2016
Body 78.3 8.13 81.3 3.83% Nov. 25, 2016
D2450V2 727 2450
D5GHzV2 1023
5600
5200
5300
Frequency
(MHz)
D835V2 4d063 835
D1900V2 5d027 1900
Table 1. Results of system validation
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 31 of 130
1.12 Tissue Simulant Fluid for the Frequency Band
The dielectric properties for this Head-simulant fluid were measured by using the
Agilent Model 85070E Dielectric Probe (rates frequency band 200 MHz to 20 GHz)
in conjunction with Network Analyzer.
All dielectric parameters of tissue simulates were measured within 24 hours of
SAR measurements. The depth of the tissue simulant in the flat section of the
phantom was at least 15 cm (3G) or 10 cm (>3G) during all tests. (Appendix Fig.
2)
Tissue
Type
Measured
Frequency
(MHz)
Target
Dielectric
Constant,
εr
Target
Conductivity,
σ (S/m)
Measured
Dielectric
Constant,
εr
Measured
Conductivity,
σ (S/m)
% dev εr% dev σMeasurement
Date
835 41.500 0.900 41.181 0.882 0.77% 2.00%
846.6 41.500 0.912 41.038 0.894 1.11% 2.03%
848.8 41.500 0.915 41.013 0.896 1.17% 2.06%
1850.2 40.000 1.400 40.207 1.378 -0.52% 1.57%
1900 40.000 1.400 40.087 1.429 -0.22% -2.07%
2437 39.223 1.788 38.236 1.813 2.52% -1.37%
2450 39.200 1.800 38.213 1.826 2.52% -1.44%
5200 35.986 4.655 35.052 4.726 2.59% -1.53%
5210 35.974 4.665 34.976 4.737 2.77% -1.54%
5290 35.883 4.747 34.465 4.858 3.95% -2.33%
5300 35.871 4.758 34.453 4.869 3.95% -2.34%
5600 35.529 5.065 34.406 5.213 3.16% -2.92%
5690 35.426 5.157 34.303 5.303 3.17% -2.83%
835 55.200 0.970 53.336 0.996 3.38% -2.68%
836.6 55.195 0.972 53.331 0.997 3.38% -2.58%
846.6 55.164 0.984 53.299 1.007 3.38% -2.31%
848.8 55.158 0.987 53.194 1.021 3.56% -3.45%
1850.2 53.300 1.520 52.089 1.507 2.27% 0.86%
1900 53.300 1.520 51.961 1.563 2.51% -2.83%
1909.8 53.300 1.520 51.935 1.573 2.56% -3.49%
2402 52.764 1.904 52.672 1.910 0.17% -0.31%
2437 52.717 1.938 52.590 1.961 0.24% -1.21%
2450 52.700 1.950 52.573 1.974 0.24% -1.23%
5200 49.014 5.299 48.387 5.333 1.28% -0.64%
5210 49.001 5.311 48.372 5.343 1.28% -0.60%
5290 48.892 5.404 48.258 5.427 1.30% -0.42%
5300 48.879 5.416 48.245 5.441 1.30% -0.46%
5600 48.471 5.766 48.772 5.868 -0.62% -1.76%
5690 48.349 5.872 48.649 5.974 -0.62% -1.75%
2016/11/22
2016/11/23
2016/11/24
2016/11/25
Body
Head
Table 2. Dielectric Parameters of Tissue Simulant Fluid
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 32 of 130
The composition of the tissue simulating liquid:
Frequency
(MHz) Mode
Ingredient Total
amount
DGMBE Water Salt Preventol
D-7 Cellulose Sugar
850 Head 532.98 g 18.3 g 2.4 g 3.2 g 766 g 1.3L(Kg)
Body 631.68 g 11.72 g 1.2 g 600 g 1.0L(Kg)
1900 Head 444.52 g 552.42 g 3.06 g 1.0L(Kg)
Body 300.67 g 716.56 g 4.0 g 1.0L(Kg)
2450 Head 550ml 450ml 1.0L(Kg)
Body 301.7ml 698.3ml 1.0L(Kg)
Simulating Liquids for 5 GHz, Manufactured by SPEAG:
Ingredients Water Esters, Emulsifiers, Inhibitors Sodium and Salt
(% by weight) 60-80 20-40 0-1.5
Table 3. Recipes for tissue simulating liquid
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 33 of 130
1.13 Test Standards and Limits
According to FCC 47CFR §2.1093(d) The limits to be used for evaluation are
based generally on criteria published by the American National Standards Institute
(ANSI) for localized specific absorption rate (‘‘SAR’’) in Section 4.2 of ‘‘IEEE
Standard for Safety Levels with Respect to Human Exposure to Radio Frequency
Electromagnetic Fields, 3 kHz to 300 GHz,’ ANSI/IEEE C95.1, By the Institute of
Electrical and Electronics Engineers, Inc., New York, New York 10017.
These criteria for SAR evaluation are similar to those recommended by the
National Council on Radiation Protection and Measurements (NCRP) in
‘Biological Effects and Exposure Criteria for Radio frequency Electromagnetic
Fields,’’ NCRP Report No. 86, Section 17.4.5. Copyright NCRP, 1986, Bethesda,
Maryland 20814. SAR is a measure of the rate of energy absorption due to
exposure to an RF transmitting source. SAR values have been related to
threshold levels for potential biological hazards. The criteria to be used are
specified in paragraphs (d)(1) and (d)(2) of this section and shall apply for portable
devices transmitting in the frequency range from 100 kHz to 6 GHz. Portable
devices that transmit at frequencies above 6 GHz are to be evaluated in terms of
the MPE limits specified in § 1.1310 of this chapter.
Measurements and calculations to demonstrate compliance with MPE field
strength or power density limits for devices operating above 6 GHz should be
made at a minimum distance of 5 cm from the radiating source.
1. Limits for Occupational/Controlled exposure: 0.4 W/kg as averaged over the
whole-body and spatial peak SAR not exceeding 8 W/kg as averaged over any
1 gram of tissue (defined as a tissue volume in the shape of a cube).
Exceptions are the hands, wrists, feet and ankles where the spatial peak SAR
shall not exceed 20 W/kg, as averaged over a 10 grams of tissue (defined as a
tissue volume in the shape of a cube).
Occupational/Controlled limits apply when persons are exposed as a
consequence of their employment provided these persons are fully aware of and
exercise control over their exposure. Awareness of exposure can be
accomplished by use of warning labels or by specific training or education through
appropriate means, such as an RF safety program in a work environment.
2. Limits for General Population/Uncontrolled exposure: 0.08 W/kg as averaged
over the whole-body and spatial peak SAR not exceeding 1.6 W/kg as
averaged over any 1 gram of tissue (defined as a tissue volume in the shape of
a cube).
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 34 of 130
Exceptions are the hands, wrists, feet and ankles where the spatial peak SAR
shall not exceed 4 W/kg, as averaged over any 10 grams of tissue (defined as a
tissue volume in the shape of a cube).
General Population/Uncontrolled limits apply when the general public may be
exposed, or when persons that are exposed as a consequence of their
employment may not be fully aware of the potential for exposure or do not
exercise control over their exposure.
Warning labels placed on consumer devices such as cellular telephones will not
be sufficient reason to allow these devices to be evaluated subject to limits for
occupational/controlled exposure in paragraph (d)(1) of this section.(Table .6)
Human Exposure Uncontrolled Environment
General Population Controlled Environment
Occupational
Spatial Peak SAR
(Brain) 1.60 W/kg 8.00 W/kg
Spatial Average SAR
(Whole Body) 0.08 W/kg 0.40 W/kg
Spatial Peak SAR
(Hands/Feet/Ankle/Wrist) 4.00 W/kg 20.00 W/kg
Table 4. RF exposure limits
Notes:
1. Uncontrolled environments are defined as locations where there is potential exposure of
individuals who have no knowledge or control of their potential exposure.
2. Controlled environments are defined as locations where there is potential exposure of
individuals who have knowledge of their potential exposure and can exercise control
over their exposure.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 35 of 130
2. Summary of Results
GSM 850 MHz
Measured Reported
Re Cheek - 251 848.8 33.00 32.42 14.29% 0.114 0.130 46
Re Tilt - 251 848.8 33.00 32.42 14.29% 0.046 0.053 -
Le Cheek - 251 848.8 33.00 32.42 14.29% 0.090 0.103 -
Le Tilt - 251 848.8 33.00 32.42 14.29% 0.056 0.064 -
Front side 10 251 848.8 33.00 32.42 14.29% 0.193 0.221 -
Back side 10 251 848.8 33.00 32.42 14.29% 0.571 0.653 47
Front side 10 251 848.8 30.00 29.43 14.02% 0.190 0.217 -
Back side 10 251 848.8 30.00 29.43 14.02% 0.554 0.632 48
Bottom side 10 251 848.8 30.00 29.43 14.02% 0.234 0.267 -
Right side 10 251 848.8 30.00 29.43 14.02% 0.141 0.161 -
Left side 10 251 848.8 30.00 29.43 14.02% 0.047 0.054 -
Plot
page
Measured
Avg.
Power
(dBm)
Scaling
Averaged SAR over
1g
(W/kg)
GPRS850
(Hotspot)
(1Dn2UP)
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Mode Position
Distanc
e
(mm)
CH
GSM850
(Body-Worn)
GSM850
(Head)
GSM 1900 MHz
Measured Reported
Re Cheek - 512 1850.2 30.00 29.19 20.50% 0.166 0.200 -
Re Tilt - 512 1850.2 30.00 29.19 20.50% 0.092 0.111 -
Le Cheek - 512 1850.2 30.00 29.19 20.50% 0.310 0.374 49
Le Tilt - 512 1850.2 30.00 29.19 20.50% 0.099 0.119 -
Front side 10 512 1850.2 30.00 29.19 20.50% 0.297 0.358 -
Back side 10 512 1850.2 30.00 29.19 20.50% 0.502 0.605 50
Front side 10 810 1909.8 24.00 23.50 12.20% 0.309 0.347 -
Back side 10 810 1909.8 24.00 23.50 12.20% 0.399 0.448 51
Bottom side 10 810 1909.8 24.00 23.50 12.20% 0.210 0.236 -
Right side 10 810 1909.8 24.00 23.50 12.20% 0.012 0.013 -
Left side 10 810 1909.8 24.00 23.50 12.20% 0.187 0.210 -
GPRS1900
(Hotspot)
(1Dn4UP)
Measured
Avg.
Power
(dBm)
Scaling
Averaged SAR over
1g
(W/kg) Plot
page
GSM1900
(Head)
GSM1900
(Body-Worn)
Mode Position
Distanc
e
(mm)
CH Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 36 of 130
WCDMA Band V
Measured Reported
RE Cheek - 4233 846.6 24.5 24.32 4.23% 0.182 0.190 52
RE Tilt - 4233 846.6 24.5 24.32 4.23% 0.070 0.073 -
LE Cheek - 4233 846.6 24.5 24.32 4.23% 0.127 0.132 -
LE Tilt - 4233 846.6 24.5 24.32 4.23% 0.086 0.090 -
Front side 10 4233 846.6 24.5 24.32 4.23% 0.293 0.305 -
Back side 10 4132 826.4 24.5 23.73 19.40% 0.755 0.901 -
Back side 10 4183 836.6 24.5 23.93 14.02% 0.760 0.867 -
Back side 10 4233 846.6 24.5 24.32 4.23% 0.802 0.836 53
Back side* 10 4233 846.6 24.5 24.32 4.23% 0.800 0.834 -
Bottom side 10 4233 846.6 24.5 24.32 4.23% 0.329 0.343 -
Right side 10 4233 846.6 24.5 24.32 4.23% 0.232 0.242 -
Left side 10 4233 846.6 24.5 24.32 4.23% 0.074 0.077 -
Hotspot
Measured
Avg.
Power
(dBm)
Scaling
Averaged SAR over
1g
(W/kg) Plot
page
R99
(Head)
Mode Position
Distanc
e
(mm)
CH Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
* - repeated at the highest SAR measurement according to the KDB865664D01v01r04
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 37 of 130
WLAN802.11 b
Measured Reported
RE Cheek - 6 2437 13.5 12.22 134.28% 0.032 0.043 -
RE Tilt - 6 2437 13.5 12.22 134.28% 0.026 0.035 -
LE Cheek - 6 2437 13.5 12.22 134.28% 0.065 0.087 54
LE Tilt - 6 2437 13.5 12.22 134.28% 0.045 0.060 -
Front side 10 6 2437 13.5 12.22 134.28% 0.017 0.023 -
Back side 10 6 2437 13.5 12.22 134.28% 0.057 0.077 55
Top side 10 6 2437 13.5 12.22 134.28% 0.020 0.027 -
Left side 10 6 2437 13.5 12.22 134.28% 0.004 0.006 -
WLAN
802.11 b
(Head)
Hotspot
Plot
page
Mode Position Distance
(mm) CH
Measured
Avg.
Power
(dBm)
Scaling
Averaged SAR over 1g
(W/kg)
Freq.
(MHz)
Max. Rated
Avg.
Power + Max.
Tolerance
(dBm)
Bluetooth
Measured Reported
Front side 10 0 2402 10 8.91 128.53% 0.005 0.006 -
Back side 10 0 2402 10 8.91 128.53% 0.019 0.024 56
Bluetoot
h
(GFSK)
(Body-
worn)
Plot
page
Mode Position Distance
(mm) CH
Measured
Avg.
Power
(dBm)
Scaling
Averaged SAR over 1g
(W/kg)
Freq.
(MHz)
Max. Rated
Avg.
Power + Max.
Tolerance
(dBm)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 38 of 130
WLAN802.11 ac(80M) 5.2G
Measured Reported
RE Cheek - 42 5210 13 12.39 115.08% 0.098 0.113 -
RE Tilt - 42 5210 13 12.39 115.08% 0.075 0.086 -
LE Cheek - 42 5210 13 12.39 115.08% 0.135 0.155 57
LE Tilt - 42 5210 13 12.39 115.08% 0.086 0.099 -
Front side 10 42 5210 13 12.39 115.08% 0.020 0.023 -
Back side 10 42 5210 13 12.39 115.08% 0.072 0.083 58
Body-
worn
Mode Position Distance
(mm) CH
Measured
Avg.
Power
(dBm)
Scaling
Averaged SAR over 1g
(W/kg) Plot
page
WLAN
802.11
ac(80M)
5.2G
(Head)
Freq.
(MHz)
Max. Rated
Avg.
Power + Max.
Tolerance
(dBm)
WLAN802.11 ac(80M) 5.3G
Measured Reported
RE Cheek - 58 5290 13 12.46 113.24% 0.065 0.074 -
RE Tilt - 58 5290 13 12.46 113.24% 0.056 0.063 -
LE Cheek - 58 5290 13 12.46 113.24% 0.098 0.111 59
LE Tilt - 58 5290 13 12.46 113.24% 0.077 0.087 -
Front side 10 58 5290 13 12.46 113.24% 0.020 0.023 -
Back side 10 58 5290 13 12.46 113.24% 0.059 0.067 60
Body-
worn
Mode Position Distance
(mm) CH
Measured
Avg.
Power
(dBm)
Scaling
Averaged SAR over 1g
(W/kg) Plot
page
WLAN
802.11
ac(80M)
5.3G
(Head)
Freq.
(MHz)
Max. Rated
Avg.
Power + Max.
Tolerance
(dBm)
WLAN802.11 ac(80M) 5.6G
Measured Reported
RE Cheek - 138 5690 12.5 11.82 116.95% 0.088 0.103 -
RE Tilt - 138 5690 12.5 11.82 116.95% 0.085 0.099 -
LE Cheek - 138 5690 12.5 11.82 116.95% 0.065 0.076 -
LE Tilt - 138 5690 12.5 11.82 116.95% 0.095 0.111 61
Front side 10 138 5690 12.5 11.82 116.95% 0.020 0.023 -
Back side 10 138 5690 12.5 11.82 116.95% 0.027 0.032 62
Measured
Avg.
Power
(dBm)
Scaling
Averaged SAR over 1g
(W/kg) Plot
page
WLAN
802.11
ac(80M)
5.6G
(Head)
Freq.
(MHz)
Max. Rated
Avg.
Power + Max.
Tolerance
(dBm)
Body-
worn
Mode Position Distance
(mm) CH
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 39 of 130
3. Simultaneous Transmission Analysis
Simultaneous Transmission Scenarios:
Simultaneous Transmit Configurations Head Body-Worn Hotspot
GSM + 2.4GHz Wi-Fi Yes Yes No
GPRS + 2.4GHz Wi-Fi No No Yes
WCDMA + 2.4GHz Wi-Fi Yes Yes Yes
GSM + 5GHz Wi-Fi Yes Yes No
GPRS + 5GHz Wi-Fi No No No
WCDMA + 5GHz Wi-Fi Yes Yes No
GSM + BT No Yes No
GPRS + BT No No No
WCDMA + BT No Yes No
Notes:
1. WiFi and BT can't transmit simultaneously.
2. The device does not support DTM function. Body-worn accessory testing is typically
associated with voice operations. Therefore, GSM voice was evaluated for body-worn SAR.
3.Based on KDB447498D01 note 36, when SAR test exclusion is allowed by other published RF
exposure KDB procedures, such as the 2.5 cm hotspot mode SAR test exclusion for an edge or
surface, then estimated SAR is not required to determine simultaneous SAR test exclusion.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 40 of 130
3.1 Estimated SAR calculation
According to KDB447498 D01v05 – When standalone SAR test exclusion applies
to an antenna that transmits simultaneously with other antennas, the standalone
SAR must be estimated according to following to determine simultaneous
transmission SAR test exclusion:
If the minimum test separation distance is < 5mm, a distance of 5mm is used for
estimated SAR calculation. When the test separation distance is >50mm, the
0.4W/kg is used for SAR-1g.
3.2 SPLSR evaluation and analysis
Per KDB447498D01, when the sum of SAR is larger than the limit, SAR test
exclusion is determined by the SAR sum to peak location separation ratio(SPLSR).
The simultaneous transmitting antennas in each operating mode and exposure
condition combination must be considered one pair at a time to determine the SAR
to peak location separation ratio to qualify for test exclusion.
The ratio is determined by (SAR1 + SAR2)^1.5/Ri, rounded to two decimal digits,
and must be 0.04 for all antenna pairs in the configuration to qualify for 1-g SAR
test exclusion.
SAR1 and SAR2 are the highest reported or estimated SAR for each antenna in the
pair, and Ri is the separation distance between the peak SAR locations for the
antenna pair in mm.
When standalone test exclusion applies, SAR is estimated; the peak location is
assumed to be at the feed-point or geometric center of the antenna.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 41 of 130
Simultaneous Transmission Combination
ΣSAR
WWAN WLAN <1.6W/kg
Right cheek 0.130 0.043 0.173
Right tilt 0.053 0.035 0.088
Left cheek 0.103 0.087 0.190
Left tilt 0.064 0.060 0.124
Front 0.217 0.023 0.240
Back 0.632 0.077 0.709
Top - 0.027 -
Bottom 0.267 - -
Right 0.161 - -
Left 0.054 0.006 0.060
Right cheek 0.200 0.043 0.243
Right tilt 0.111 0.035 0.146
Left cheek 0.374 0.087 0.461
Left tilt 0.119 0.060 0.179
Front 0.347 0.023 0.370
Back 0.448 0.077 0.525
Top - 0.027 -
Bottom 0.236 - -
Right 0.013 - -
Left 0.210 0.006 0.216
Right cheek 0.190 0.043 0.233
Right tilt 0.073 0.035 0.108
Left cheek 0.132 0.087 0.219
Left tilt 0.090 0.060 0.150
Front 0.305 0.023 0.328
Back 0.901 0.077 0.978
Top - 0.027 -
Bottom 0.343 - -
Right 0.242 - -
Left 0.077 0.006 0.083
Head
Hotspot
WCDMA
Band V
reported SAR WWAN and WLAN 2.4GHz, ΣSAR evaluation
Frequency
band Position reported SAR / W/kg
GPRS 1900
(1Dn4UP) Hotspot
GSM 850 Head
GPRS 850
(1Dn2UP) Hotspot
GSM 1900 Head
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 42 of 130
ΣSAR
WWAN WLAN <1.6W/kg
Front 0.221 0.023 0.244
Back 0.653 0.077 0.730
Front 0.358 0.023 0.381
Back 0.605 0.077 0.682
Body-
worn
Body-
worn
GSM 1900
reported SAR WWAN and WLAN 2.4GHz, ΣSAR evaluation
Frequency
band Position reported SAR / W/kg
GSM 850
ΣSAR
WWAN WLAN <1.6W/kg
Right cheek 0.130 0.113 0.243
Right tilt 0.053 0.099 0.152
Left cheek 0.103 0.155 0.258
Left tilt 0.064 0.111 0.175
Front 0.221 0.023 0.244
Back 0.653 0.083 0.736
Right cheek 0.200 0.113 0.313
Right tilt 0.111 0.099 0.210
Left cheek 0.374 0.155 0.529
Left tilt 0.119 0.111 0.230
Front 0.358 0.023 0.381
Back 0.605 0.083 0.688
Right cheek 0.190 0.113 0.303
Right tilt 0.073 0.099 0.172
Left cheek 0.132 0.155 0.287
Left tilt 0.090 0.111 0.201
Front 0.305 0.023 0.328
Back 0.901 0.083 0.984
reported SAR WWAN and WLAN 5GHz, ΣSAR evaluation
Frequency
band Position reported SAR / W/kg
Head
GSM 850
Body-
worn
Head
Body-
worn
WCDMA
Band V
Body-
worn
Head
GSM 1900
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 43 of 130
ΣSAR
WWAN Bluetooth <1.6W/kg
Front 0.221 0.006 0.227
Back 0.653 0.024 0.677
Front 0.358 0.006 0.364
Back 0.605 0.024 0.629
Front 0.305 0.006 0.311
Back 0.901 0.024 0.925
GSM 1900 Body-
Worn
WCDMA
Band V
Body-
Worn
reported SAR WWAN and Bluetooth, ΣSAR evaluation
Frequency
band Position reported SAR / W/kg
GSM 850 Body-
Worn
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 44 of 130
4. Instruments List
Manufacturer Device Type Serial number Date of last
calibration Date of next
calibration
Schmid &
Partner
Engineering AG
Dosimetric E-Field
Probe EX3DV4 3831 Jan.27,2016 Jan.26,2017
Schmid &
Partner
Engineering AG
System Validation
Dipole
D835V2 4d063 Aug.25,2016 Aug.24,2017
D1900V2 5d027 Apr.25,2016 Apr.24,2017
D2450V2 727 Apr.19,2016 Apr.18,2017
D5GHzV2 1023 Jan.26,2016 Jan.25,2017
Schmid &
Partner
Engineering AG
Data acquisition
Electronics DAE4 547 Mar.21,2016 Mar.20,2017
Schmid &
Partner
Engineering AG Software DASY 52
V52.8.8 N/A Calibration
not required Calibration
not required
Schmid &
Partner
Engineering AG Phantom SAM N/A
Calibration
not required Calibration
not required
Agilent Network Analyzer E5071C
MY46107530 Jan.07,2016 Jan.06,2017
Agilent Dielectric
Probe Kit 85070E MY44300677 Calibration
not required Calibration
not required
Agilent Dual-directional
coupler
772D MY52180142 Apr.13,2016 Apr.12,2017
778D MY52180302 Apr.13,2016 Apr.12,2017
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 45 of 130
Manufacturer Device Type Serial number Date of last
calibration Date of next
calibration
Agilent RF Signal
Generator N5181A MY50145142 Feb.19,2016
Feb.18,2017
Agilent Power Meter E4417A
MY51410006 Jan.07,2016 Jan.06,2017
Agilent Power Sensor
E9301H MY51470001 Jan.07,2016 Jan.06,2017
E9301H MY51470002 Jan.07,2016 Jan.06,2017
TECPEL Digital
thermometer DTM-303A TP130073 Feb.26,2016
Feb.25,2017
Anritsu Radio
Communication
Test MT8820C 6201061049 Apr.08,2016 Apr.07,2017
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 46 of 130
5. Measurements Date: 2016/11/22
GSM 850_Head_Re Cheek_CH 251
Communication System: GSM; Frequency: 848.8 MHz, Duty Cycle: 1:8.3
Medium parameters used: f = 849 MHz; σ = 0.896 S/m; εr = 41.013; ρ = 1000 kg/m3
Phantom section: Right Section
Ambient temperature: 23.4° C ; Liquid temperature: 21.8° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(8.84, 8.84, 8.84); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (71x111x1): Interpolated grid: dx=15 mm, dy=15
mm
Maximum value of SAR (interpolated) = 0.132 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 3.478 V/m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 0.142 W/kg
SAR(1 g) = 0.114 W/kg; SAR(10 g) = 0.085 W/kg
Maximum value of SAR (measured) = 0.131 W/kg
0 dB = 0.131 W/kg = -8.82 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 47 of 130
Date: 2016/11/24
GSM 850_Body-worn_Back side_CH 251_10mm
Communication System: GSM; Frequency: 848.8 MHz, Duty Cycle: 1:8.3
Medium parameters used: f = 849 MHz; σ = 1.021 S/m; εr = 53.194; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(9.08, 9.08, 9.08); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (71x121x1): Interpolated grid: dx=15 mm, dy=15
mm
Maximum value of SAR (interpolated) = 0.786 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 15.06 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 0.992 W/kg
SAR(1 g) = 0.571 W/kg; SAR(10 g) = 0.316 W/kg
Maximum value of SAR (measured) = 0.797 W/kg
0 dB = 0.797 W/kg = -0.98 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 48 of 130
Date: 2016/11/24
GPRS 850_Hotspot_Back side_CH 251_10mm
Communication System: GPRS (1Dn2Up); Frequency: 848.8 MHz, Duty Cycle: 1:4.15
Medium parameters used: f = 849 MHz; σ = 1.021 S/m; εr = 53.194; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(9.08, 9.08, 9.08); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (71x121x1): Interpolated grid: dx=15 mm, dy=15
mm
Maximum value of SAR (interpolated) = 0.761 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 14.79 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 0.963 W/kg
SAR(1 g) = 0.554 W/kg; SAR(10 g) = 0.307 W/kg
Maximum value of SAR (measured) = 0.775 W/kg
0 dB = 0.775 W/kg = -1.11 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 49 of 130
Date: 2016/11/22
GSM 1900_Head_Le Cheek_CH 512
Communication System: GSM; Frequency: 1850.2 MHz, Duty Cycle: 1:8.3
Medium parameters used: f = 1850.2 MHz; σ = 1.378 S/m; εr = 40.207; ρ = 1000 kg/m3
Phantom section: Left Section
Ambient temperature: 23.1° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(7.66, 7.66, 7.66); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (61x111x1): Interpolated grid: dx=15 mm, dy=15
mm
Maximum value of SAR (interpolated) = 0.401 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 4.847 V/m; Power Drift = 0.15 dB
Peak SAR (extrapolated) = 0.479 W/kg
SAR(1 g) = 0.310 W/kg; SAR(10 g) = 0.192 W/kg
Maximum value of SAR (measured) = 0.402 W/kg
0 dB = 0.402 W/kg = -3.96 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 50 of 130
Date: 2016/11/24
GSM 1900_Body-worn_Back side_CH 512_10mm
Communication System: GSM; Frequency: 1850.2 MHz, Duty Cycle: 1:8.3
Medium parameters used: f = 1850.2 MHz; σ = 1.507 S/m; εr = 52.089; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.4° C ; Liquid temperature: 22.2° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(7.54, 7.54, 7.54); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (61x131x1): Interpolated grid: dx=15 mm, dy=15
mm
Maximum value of SAR (interpolated) = 0.714 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 7.367 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.854 W/kg
SAR(1 g) = 0.502 W/kg; SAR(10 g) = 0.302 W/kg
Maximum value of SAR (measured) = 0.658 W/kg
0 dB = 0.658 W/kg = -1.82 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 51 of 130
Date: 2016/11/24
GPRS 1900_Hotspot_Back side_CH 810_10mm
Communication System: GPRS (1Dn4Up); Frequency: 1909.8 MHz, Duty Cycle: 1:2
Medium parameters used: f = 1910 MHz; σ = 1.573 S/m; εr = 51.935; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.4° C ; Liquid temperature: 22.2° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(7.54, 7.54, 7.54); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (61x131x1): Interpolated grid: dx=15 mm, dy=15
mm
Maximum value of SAR (interpolated) = 0.586 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 5.658 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 0.651 W/kg
SAR(1 g) = 0.399 W/kg; SAR(10 g) = 0.249 W/kg
Maximum value of SAR (measured) = 0.525 W/kg
0 dB = 0.525 W/kg = -2.80 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 52 of 130
Date: 2016/11/22
WCDMA Band V_Head_Re Cheek_CH 4233
Communication System: WCDMA; Frequency: 846.6 MHz, Duty Cycle: 1:1
Medium parameters used: f = 847 MHz; σ = 0.894 S/m; εr = 41.038; ρ = 1000 kg/m3
Phantom section: Right Section
Ambient temperature: 23.4° C ; Liquid temperature: 21.8° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(8.84, 8.84, 8.84); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (71x111x1): Interpolated grid: dx=15 mm, dy=15
mm
Maximum value of SAR (interpolated) = 0.209 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 3.902 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 0.227 W/kg
SAR(1 g) = 0.182 W/kg; SAR(10 g) = 0.134 W/kg
Maximum value of SAR (measured) = 0.209 W/kg
0 dB = 0.209 W/kg = -6.80 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 53 of 130
Date: 2016/11/24
WCDMA Band V_Hotspot_Back side_CH 4233_10mm
Communication System: WCDMA; Frequency: 846.6 MHz, Duty Cycle: 1:1
Medium parameters used: f = 847 MHz; σ = 1.007 S/m; εr = 53.299; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(9.08, 9.08, 9.08); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (71x121x1): Interpolated grid: dx=15 mm, dy=15
mm
Maximum value of SAR (interpolated) = 1.06 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 17.31 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 1.33 W/kg
SAR(1 g) = 0.802 W/kg; SAR(10 g) = 0.440 W/kg
Maximum value of SAR (measured) = 1.06 W/kg
0 dB = 1.06 W/kg = 0.25 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 54 of 130
Date: 2016/11/22
WLAN 802.11b_Head_Le Cheek_CH 6
Communication System: WLAN(2.4G); Frequency: 2437 MHz, Duty Cycle: 1:1
Medium parameters used: f = 2437 MHz; σ = 1.813 S/m; εr = 38.236; ρ = 1000 kg/m3
Phantom section: Left Section
Ambient temperature: 23.4° C ; Liquid temperature: 22.1° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(6.92, 6.92, 6.92); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (81x141x1): Interpolated grid: dx=12 mm, dy=12
mm
Maximum value of SAR (interpolated) = 0.0978 W/kg
Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 4.149 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 0.142 W/kg
SAR(1 g) = 0.065 W/kg; SAR(10 g) = 0.032 W/kg
Maximum value of SAR (measured) = 0.0993 W/kg
0 dB = 0.0993 W/kg = -10.03 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 55 of 130
Date: 2016/11/25
WLAN 802.11b_Hotspot_Back side_CH 6_10mm
Communication System: WLAN(2.4G); Frequency: 2437 MHz, Duty Cycle: 1:1
Medium parameters used: f = 2437 MHz; σ = 1.961 S/m; εr = 52.59; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.7° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(7.05, 7.05, 7.05); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (91x141x1): Interpolated grid: dx=12 mm, dy=12
mm
Maximum value of SAR (interpolated) = 0.0858 W/kg
Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 2.613 V/m; Power Drift = 0.18 dB
Peak SAR (extrapolated) = 0.126 W/kg
SAR(1 g) = 0.057 W/kg; SAR(10 g) = 0.025 W/kg
Maximum value of SAR (measured) = 0.0898 W/kg
0 dB = 0.0898 W/kg = -10.47 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 56 of 130
Date: 2016/11/25
Bluetooth(GFSK)_Body-worn_Back side_CH 0_10mm
Communication System: Bluetooth; Frequency: 2402 MHz, Duty Cycle: 1:1
Medium parameters used: f = 2402 MHz; σ = 1.91 S/m; εr = 52.672; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.7° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(7.05, 7.05, 7.05); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (91x141x1): Interpolated grid: dx=12 mm, dy=12
mm
Maximum value of SAR (interpolated) = 0.0286 W/kg
Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 1.196 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 0.0730 W/kg
SAR(1 g) = 0.019 W/kg; SAR(10 g) = 0.0085 W/kg
Maximum value of SAR (measured) = 0.0316 W/kg
0 dB = 0.0316 W/kg = -15.00 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 57 of 130
Date: 2016/11/23
WLAN 802.11ac(80M) 5.2G_Head_Le Cheek_CH 42
Communication System: WLAN 5G; Frequency: 5210 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5210 MHz; σ = 4.737 S/m; εr = 34.976; ρ = 1000 kg/m3
Phantom section: Left Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.4° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(4.76, 4.76, 4.76); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (91x161x1): Interpolated grid: dx=10 mm, dy=10
mm
Maximum value of SAR (interpolated) = 0.373 W/kg
Configuration/Head/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 0.5510 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 0.570 W/kg
SAR(1 g) = 0.135 W/kg; SAR(10 g) = 0.034 W/kg
Maximum value of SAR (measured) = 0.307 W/kg
0 dB = 0.307 W/kg = -5.13 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 58 of 130
Date: 2016/11/25
WLAN 802.11ac(80M) 5.2G_Body-worn_Back side_CH 42_10mm
Communication System: WLAN(5G); Frequency: 5210 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5210 MHz; σ = 5.343 S/m; εr = 48.372; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.6° C ; Liquid temperature: 22.1° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(4.07, 4.07, 4.07); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (101x161x1): Interpolated grid: dx=10 mm, dy=10
mm
Maximum value of SAR (interpolated) = 0.139 W/kg
Configuration/Head/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 0.6880 V/m; Power Drift = 0.17 dB
Peak SAR (extrapolated) = 0.263 W/kg
SAR(1 g) = 0.072 W/kg; SAR(10 g) = 0.024 W/kg
Maximum value of SAR (measured) = 0.147 W/kg
0 dB = 0.147 W/kg = -8.33 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 59 of 130
Date: 2016/11/23
WLAN 802.11ac(80M) 5.3G_Head_Le Cheek_CH 58
Communication System: WLAN 5G; Frequency: 5290 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5290 MHz; σ = 4.858 S/m; εr = 34.465; ρ = 1000 kg/m3
Phantom section: Left Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.4° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(4.46, 4.46, 4.46); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (91x161x1): Interpolated grid: dx=10 mm, dy=10
mm
Maximum value of SAR (interpolated) = 0.399 W/kg
Configuration/Head/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 1.238 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.443 W/kg
SAR(1 g) = 0.098 W/kg; SAR(10 g) = 0.025 W/kg
Maximum value of SAR (measured) = 0.240 W/kg
0 dB = 0.240 W/kg = -6.19 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 60 of 130
Date: 2016/11/25
WLAN 802.11ac(80M) 5.3G_Body-worn_Back side_CH 58_10mm
Communication System: WLAN(5G); Frequency: 5290 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5290 MHz; σ = 5.427 S/m; εr = 48.258; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.6° C ; Liquid temperature: 22.1° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(3.81, 3.81, 3.81); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (101x161x1): Interpolated grid: dx=10 mm, dy=10
mm
Maximum value of SAR (interpolated) = 0.116 W/kg
Configuration/Head/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 1.014 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 0.231 W/kg
SAR(1 g) = 0.059 W/kg; SAR(10 g) = 0.019 W/kg
Maximum value of SAR (measured) = 0.122 W/kg
0 dB = 0.122 W/kg = -9.14 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 61 of 130
Date: 2016/11/23
WLAN 802.11ac(80M) 5.6G_Head_Le Tilt_CH 138
Communication System: WLAN 5G; Frequency: 5690 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5690 MHz; σ = 5.303 S/m; εr = 34.303; ρ = 1000 kg/m3
Phantom section: Left Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.4° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(4.08, 4.08, 4.08); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (91x161x1): Interpolated grid: dx=10 mm, dy=10
mm
Maximum value of SAR (interpolated) = 0.407 W/kg
Configuration/Head/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 2.051 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 1.10 W/kg
SAR(1 g) = 0.095 W/kg; SAR(10 g) = 0.022 W/kg
Maximum value of SAR (measured) = 0.166 W/kg
0 dB = 0.166 W/kg = -7.79 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 62 of 130
Date: 2016/11/25
WLAN 802.11ac(80M) 5.6G_Body-worn_Back side_CH 138_10mm
Communication System: WLAN(5G); Frequency: 5690 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5690 MHz; σ = 5.974 S/m; εr = 48.649; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.6° C ; Liquid temperature: 22.1° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(3.47, 3.47, 3.47); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Head/Area Scan (101x161x1): Interpolated grid: dx=10 mm, dy=10
mm
Maximum value of SAR (interpolated) = 0.117 W/kg
Configuration/Head/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 0.8100 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 0.191 W/kg
SAR(1 g) = 0.027 W/kg; SAR(10 g) = 0.00826 W/kg
Maximum value of SAR (measured) = 0.0597 W/kg
0 dB = 0.0597 W/kg = -12.24 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 63 of 130
6. SAR System Performance Verification Date: 2016/11/22
Dipole 835 MHz_SN:4d063_Head
Communication System: CW; Frequency: 835 MHz, Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; σ = 0.882 S/m; εr = 41.181; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.4° C ; Liquid temperature: 21.8° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(8.84, 8.84, 8.84); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=250mW/Area Scan (41x121x1): Interpolated grid: dx=15 mm,
dy=15 mm
Maximum value of SAR (interpolated) = 2.98 W/kg
Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 58.32 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 3.56 W/kg
SAR(1 g) = 2.33 W/kg; SAR(10 g) = 1.49 W/kg
Maximum value of SAR (measured) = 2.99 W/kg
0 dB = 2.99 W/kg = 4.76 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 64 of 130
Date: 2016/11/24
Dipole 835 MHz_SN:4d063_Body
Communication System: CW; Frequency: 835 MHz, Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; σ = 0.996 S/m; εr = 53.336; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(9.08, 9.08, 9.08); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=250mW/Area Scan (51x131x1): Interpolated grid: dx=15 mm,
dy=15 mm
Maximum value of SAR (interpolated) = 3.39 W/kg
Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 58.93 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 4.05 W/kg
SAR(1 g) = 2.56 W/kg; SAR(10 g) = 1.61 W/kg
Maximum value of SAR (measured) = 3.42 W/kg
0 dB = 3.42 W/kg = 5.34 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 65 of 130
Date: 2016/11/22
Dipole 1900 MHz_SN:5d027_Head
Communication System: CW; Frequency: 1900 MHz, Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; σ = 1.429 S/m; εr = 40.087; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.1° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(7.66, 7.66, 7.66); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=250mW/Area Scan (51x61x1): Interpolated grid: dx=15 mm,
dy=15 mm
Maximum value of SAR (interpolated) = 13.9 W/kg
Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 102.2 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 17.7 W/kg
SAR(1 g) = 9.56 W/kg; SAR(10 g) = 4.98 W/kg
Maximum value of SAR (measured) = 13.8 W/kg
0 dB = 13.8 W/kg = 11.40 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 66 of 130
Date: 2016/11/24
Dipole 1900 MHz_SN:5d027_Body
Communication System: CW; Frequency: 1900 MHz, Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; σ = 1.563 S/m; εr = 51.961; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.4° C ; Liquid temperature: 22.2° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(7.54, 7.54, 7.54); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=250mW/Area Scan (51x61x1): Interpolated grid: dx=15 mm,
dy=15 mm
Maximum value of SAR (interpolated) = 15.1 W/kg
Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 102.6 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 18.8 W/kg
SAR(1 g) = 10.1 W/kg; SAR(10 g) = 5.21 W/kg
Maximum value of SAR (measured) = 14.6 W/kg
0 dB = 14.6 W/kg = 11.64 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 67 of 130
Date: 2016/11/22
Dipole 2450 MHz_SN:727_Head
Communication System: CW; Frequency: 2450 MHz, Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.826 S/m; εr = 38.213; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.4° C ; Liquid temperature: 22.1° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(6.92, 6.92, 6.92); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=250mW/Area Scan (51x61x1): Interpolated grid: dx=15 mm,
dy=15 mm
Maximum value of SAR (interpolated) = 20.4 W/kg
Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 106.5 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 27.1 W/kg
SAR(1 g) = 12.9 W/kg; SAR(10 g) = 5.93 W/kg
Maximum value of SAR (measured) = 19.7 W/kg
0 dB = 19.7 W/kg = 12.94 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 68 of 130
Date: 2016/11/25
Dipole 2450 MHz_SN:727_Body
Communication System: CW; Frequency: 2450 MHz, Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.974 S/m; εr = 52.573; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.7° C ; Liquid temperature: 22.0° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(7.05, 7.05, 7.05); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=250mW/Area Scan (51x51x1): Interpolated grid: dx=12 mm,
dy=12 mm
Maximum value of SAR (interpolated) = 20.1 W/kg
Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 98.41 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 24.8 W/kg
SAR(1 g) = 12.1 W/kg; SAR(10 g) = 5.62 W/kg
Maximum value of SAR (measured) = 18.5 W/kg
0 dB = 18.5 W/kg = 12.67 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 69 of 130
Date: 2016/11/23
Dipole 5200 MHz_SN:1023_Head
Communication System: CW; Frequency: 5200 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5200 MHz; σ = 4.726 S/m; εr = 35.052; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.4° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(4.76, 4.76, 4.76); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=100mW/Area Scan (71x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 17.2 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 59.33 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 28.6 W/kg
SAR(1 g) = 7.71 W/kg; SAR(10 g) = 2.22 W/kg
Maximum value of SAR (measured) = 16.1 W/kg
0 dB = 16.1 W/kg = 12.06 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 70 of 130
Date: 2016/11/25
Dipole 5200 MHz_SN:1023_Body
Communication System: CW; Frequency: 5200 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5200 MHz; σ = 5.333 S/m; εr = 48.387; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.6° C ; Liquid temperature: 22.1° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(4.07, 4.07, 4.07); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=100mW/Area Scan (71x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 15.0 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 56.71 V/m; Power Drift = -0.13 dB
Peak SAR (extrapolated) = 25.6 W/kg
SAR(1 g) = 7.53 W/kg; SAR(10 g) = 2.06 W/kg
Maximum value of SAR (measured) = 14.8 W/kg
0 dB = 14.8 W/kg = 11.70 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 71 of 130
Date: 2016/11/23
Dipole 5300 MHz_SN:1023_Head
Communication System: CW; Frequency: 5300 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5300 MHz; σ = 4.869 S/m; εr = 34.453; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.4° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(4.46, 4.46, 4.46); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=100mW/Area Scan (71x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 17.9 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 59.55 V/m; Power Drift = -0.18 dB
Peak SAR (extrapolated) = 29.7 W/kg
SAR(1 g) = 8.28 W/kg; SAR(10 g) = 2.34 W/kg
Maximum value of SAR (measured) = 16.8 W/kg
0 dB = 16.8 W/kg = 12.24 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 72 of 130
Date: 2016/11/25
Dipole 5300 MHz_SN:1023_Body
Communication System: CW; Frequency: 5300 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5300 MHz; σ = 5.411 S/m; εr = 48.245; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.6° C ; Liquid temperature: 22.1° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(3.81, 3.81, 3.81); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=100mW/Area Scan (71x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 15.7 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 56.45 V/m; Power Drift = -0.13 dB
Peak SAR (extrapolated) = 27.8 W/kg
SAR(1 g) = 7.78 W/kg; SAR(10 g) = 2.17 W/kg
Maximum value of SAR (measured) = 15.3 W/kg
0 dB = 15.3 W/kg = 11.86 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 73 of 130
Date: 2016/11/23
Dipole 5600 MHz_SN:1023_Head
Communication System: CW; Frequency: 5600 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5600 MHz; σ = 5.213 S/m; εr = 34.406; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.5° C ; Liquid temperature: 22.4° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(4.08, 4.08, 4.08); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=100mW/Area Scan (71x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 18.3 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 59.28 V/m; Power Drift = -0.15 dB
Peak SAR (extrapolated) = 31.8 W/kg
SAR(1 g) = 8.4 W/kg; SAR(10 g) = 2.46 W/kg
Maximum value of SAR (measured) = 17.1 W/kg
0 dB = 17.1 W/kg = 12.34 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 74 of 130
Date: 2016/11/25
Dipole 5600 MHz_SN:1023_Body
Communication System: CW; Frequency: 5600 MHz, Duty Cycle: 1:1
Medium parameters used: f = 5600 MHz; σ = 5.868 S/m; εr = 48.772; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 23.6° C ; Liquid temperature: 22.1° C
DASY5 Configuration:
Probe: EX3DV4 - SN3831; ConvF(3.47, 3.47, 3.47); Calibrated: 2016/1/27;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn547; Calibrated: 2016/3/21
Phantom: Head
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=100mW/Area Scan (71x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 17.1 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 55.04 V/m; Power Drift = -0.15 dB
Peak SAR (extrapolated) = 34.0 W/kg
SAR(1 g) = 8.13 W/kg; SAR(10 g) = 2.32 W/kg
Maximum value of SAR (measured) = 17.0 W/kg
0 dB = 17.0 W/kg = 12.32 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 75 of 130
7. DAE & Probe Calibration Certificate
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 76 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 77 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 78 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 79 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 80 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 81 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 82 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 83 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 84 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 85 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 86 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 87 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 88 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 89 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 90 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 91 of 130
8. Uncertainty Budget
A c D e f g h=c * f / e i=c * g / e k
Source of Uncertainty Tolerance/
Uncertaint
y
Probabilit
y
Div Div Value ci (1g) ci (10g) Standard
uncertaint
y
Standard
uncertaint
y
vi, or Veff
Measurement system
Probe calibration 6.55% N 1 1 1 1 6.55% 6.55%
Isotropy , Axial 3.50% R 3 1.732 1 1 2.02% 2.02%
Isotropy,
Hemis
p
herica
l
9.60% R 3 1.732 1 1 5.54% 5.54%
Modulation Response 2.40% R 31.732 1 1 1.40% 1.40%
Boundary Effect 1.00% R 3 1.732 1 1 0.58% 0.58%
Linearity 4.70% R 3 1.732 1 1 2.71% 2.71%
Detection Limits 1.00% R 3 1.732 1 1 0.58% 0.58%
Readout Electronics 0.30% N 1 1 1 1 0.30% 0.30%
Response time 0.80% R 3 1.732 1 1 0.46% 0.46%
Integration Time 2.60% R 3 1.732 1 1 1.50% 1.50%
Measurement drift
(
class A evaluation
)
1.75% R 3 1.732 1 1 1.01% 1.01%
RF ambient condition -
noise 3.00% R 3 1.732 1 1 1.73% 1.73%
RF ambient conditions -
reflections 3.00% R 3 1.732 1 1 1.73% 1.73%
Probe positioner
Mechanical restrictions 0.40% R 3 1.732 1 1 0.23% 0.23%
Probe Positioning with
res
p
ect to
p
hantom 2.90% R 3 1.732 1 1 1.67% 1.67%
Post-processing 1.00% R 3 1.732 1 1 0.58% 0.58%
Max SAR Eval 1.00% R 3 1.732 1 1 0.58% 0.58%
Test Sample related
Test sample positioning 2.90% N 1 1 1 1 2.90% 2.90% M-1
Device Holder
Uncertaint
y
3.60% N 1 1 1 1 3.60% 3.60% M-1
Drift of output power 5.00% R 3 1.732 1 1 2.89% 2.89%
Phantom and Setup
Phantom Uncertainty 4.00% R 3 1.732 1 1 2.31% 2.31%
Liquid permittivity
(mea.) 3.95% N 1 1 0.64 0.43 2.53% 1.70% M
Liquid Conductivity
(mea.) 2.92% N 1 1 0.6 0.49 1.75% 1.43% M
Combined standard
uncertaint
y
RSS 12.11% 11.92%
Expant uncertainty
(
95% confidence 24.23% 23.83%
Measurement Uncertainty evaluation template for DUT SAR test (3-6G)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 92 of 130
A c D e f g h=c * f / e i=c * g / e k
Source of Uncertainty Tolerance/
Uncertaint
y
Probabilit
y
Div Div Value ci (1g) ci (10g) Standard
uncertaint
y
Standard
uncertaint
y
vi, or Veff
Measurement system
Probe calibration 6.00% N 1 1 1 1 6.00% 6.00%
Isotropy , Axial 3.50% R 31.732 1 1 2.02% 2.02%
Isotropy,
Hemis
p
herica
l
9.60% R 31.732 1 1 5.54% 5.54%
Modulation Response 2.40% R 31.732 1 1 1.40% 1.40%
Boundary Effect 1.00% R 31.732 1 1 0.58% 0.58%
Linearity 4.70% R 31.732 1 1 2.71% 2.71%
Detection Limits 1.00% R 31.732 1 1 0.58% 0.58%
Readout Electronics 0.30% N 1 1 1 1 0.30% 0.30%
Response time 0.80% R 31.732 1 1 0.46% 0.46%
Integration Time 2.60% R 31.732 1 1 1.50% 1.50%
Measurement drift
(
class A evaluation
)
1.75% R 31.732 1 1 1.01% 1.01%
RF ambient condition -
noise 3.00% R 31.732 1 1 1.73% 1.73%
RF ambient conditions -
reflections 3.00% R 31.732 1 1 1.73% 1.73%
Probe positioner
Mechanical restrictions 0.40% R 31.732 1 1 0.23% 0.23%
Probe Positioning with
res
p
ect to
p
hantom 2.90% R 31.732 1 1 1.67% 1.67%
Post-processing 1.00% R 31.732 1 1 0.58% 0.58%
Max SAR Eval 1.00% R 31.732 1 1 0.58% 0.58%
Test Sample related
Test sample positioning 2.90% N 1 1 1 1 2.90% 2.90% M-1
Device Holder
Uncertaint
y
3.60% N 1 1 1 1 3.60% 3.60% M-1
Drift of output power 5.00% R 31.732 1 1 2.89% 2.89%
Phantom and Setup
Phantom Uncertainty 4.00% R 31.732 1 1 2.31% 2.31%
Liquid permittivity
(mea.) 3.56% N 1 1 0.64 0.43 2.28% 1.53% M
Liquid Conductivity
(mea.) 3.49% N 1 1 0.6 0.49 2.09% 1.71% M
Combined standard
uncertaint
y
RSS 11.83% 11.64%
Expant uncertainty
(
95% confidence 23.66% 23.27%
Measurement Uncertainty evaluation template for DUT SAR test (0.3-3G)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 93 of 130
9. Phantom Description
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 94 of 130
10. System Validation from Original Equipment Supplier
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 95 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com
Member of SGS Group
Report No. : E5/2016/B0002
Page : 96 of 130
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the tim