Body Worn POV Camera System RF Exposure Info TASER International

TASER International Body Worn POV Camera System

See More Details For FCC ID: X4G-S00146
Purchase on Amazon: Body Worn POV Camera System
Download: Body Worn POV Camera System RF Exposure Info TASER International
Document DescriptionSAR Appendix A SAR Meas Data
Document TypeRF Exposure Info
Document TitleNone

Document

Trouble Loading? Try Body Worn POV Camera System RF Exposure Info TASER International Downloading this document. Zoom In and Out With ⌘ / Ctrl key and plus [+] or minus [-]
Appendix A
SAR Measurement Data
Date/Time: 12/13/2016 1:56:32 PM
antenna side up -5.8 GHz a mode High Channel
DUT: Camera top; Type: Body worn pov camera
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.611 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 6.71 V/m; Power Drift = 0.147 dB
Peak SAR (extrapolated) = 1.36 W/kg
SAR(1 g) = 0.401 mW/g; SAR(10 g) = 0.134 mW/g
Maximum value of SAR (measured) = 0.629 mW/g
BODY FLUID MEASUREMENTS
Date/Time: 12/13/2016 3:20:04 PM
antenna side up -5.8 GHz a mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5745 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.611 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 6.91 V/m; Power Drift = 0.301 dB
Peak SAR (extrapolated) = 1.59 W/kg
SAR(1 g) = 0.471 mW/g; SAR(10 g) = 0.158 mW/g
Maximum value of SAR (measured) = 0.734 mW/g
12
/
14
/
201
6
file:///C:/Users/DASY4/Client%20Projects/antenna%20side%20up%20-5.8%20GHz%20...
Date/Time: 12/13/2016 3:40:13 PM
antenna side up -5.8 GHz a mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5785 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.611 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 6.86 V/m; Power Drift = 0.454 dB
Peak SAR (extrapolated) = 3.44 W/kg
SAR(1 g) = 0.583 mW/g; SAR(10 g) = 0.190 mW/g
Maximum value of SAR (measured) = 0.715 mW/g
Date/Time: 12/13/2016 1:45:43 PM
antenna side up -5.8 GHz n mode High Channel
DUT: Camera top; Type: Body worn pov camera
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.611 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 6.91 V/m; Power Drift = 0.258 dB
Peak SAR (extrapolated) = 3.37 W/kg
SAR(1 g) = 0.565 mW/g; SAR(10 g) = 0.181 mW/g
Maximum value of SAR (measured) = 0.699 mW/g
Date/Time: 12/13/2016 3:00:14 PM
antenna side up -5.8 GHz n mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5745 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.611 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 6.72 V/m; Power Drift = 0.405 dB
Peak SAR (extrapolated) = 3.07 W/kg
SAR(1 g) = 0.539 mW/g; SAR(10 g) = 0.166 mW/g
Maximum value of SAR (measured) = 0.714 mW/g
Date/Time: 12/13/2016 2:37:25 PM
antenna side up -5.8 GHz n mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5785 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.611 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 6.85 V/m; Power Drift = 0.452 dB
Peak SAR (extrapolated) = 3.17 W/kg
SAR(1 g) = 0.538 mW/g; SAR(10 g) = 0.172 mW/g
Maximum value of SAR (measured) = 0.706 mW/g
Date/Time: 12/13/2016 6:03:21 PM
Camera Back -5.8 GHz a mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.318 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 5.49 V/m; Power Drift = 0.206 dB
Peak SAR (extrapolated) = 0.866 W/kg
SAR(1 g) = 0.193 mW/g; SAR(10 g) = 0.063 mW/g
Maximum value of SAR (measured) = 0.300 mW/g
Date/Time: 12/13/2016 6:19:32 PM
Camera Back -5.8 GHz n mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.318 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 5.51 V/m; Power Drift = 0.048 dB
Peak SAR (extrapolated) = 0.946 W/kg
SAR(1 g) = 0.191 mW/g; SAR(10 g) = 0.063 mW/g
Maximum value of SAR (measured) = 0.297 mW/g
0 dB = 0.297mW/g
Date/Time: 12/13/2016 10:19:24 AM
Camera Top -5.8 GHz a mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 1.41 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 7.49 V/m; Power Drift = 0.193 dB
Peak SAR (extrapolated) = 6.03 W/kg
SAR(1 g) = 1.04 mW/g; SAR(10 g) = 0.316 mW/g
Maximum value of SAR (measured) = 1.45 mW/g
Date/Time: 12/13/2016 12:03:48 PM
Camera Top -5.8 GHz a mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5745 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 1.41 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 8.86 V/m; Power Drift = 0.069 dB
Peak SAR (extrapolated) = 6.97 W/kg
SAR(1 g) = 1.26 mW/g; SAR(10 g) = 0.379 mW/g
Maximum value of SAR (measured) = 1.78 mW/g
Date/Time: 12/13/2016 10:19:24 AM
Camera Top - 5.8 GHz a mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5785 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 1.41 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 7.49 V/m; Power Drift = 0.193 dB
Peak SAR (extrapolated) = 6.03 W/kg
SAR(1 g) = 1.04 mW/g; SAR(10 g) = 0.316 mW/g
Maximum value of SAR (measured) = 1.45 mW/g
Date/Time: 12/13/2016 12:20:53 PM
Camera Top -5.8 GHz n mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 58.25 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 1.41 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 8.64 V/m; Power Drift = 0.166 dB
Peak SAR (extrapolated) = 7.27 W/kg
SAR(1 g) = 1.28 mW/g; SAR(10 g) = 0.377 mW/g
Maximum value of SAR (measured) = 1.82 mW/g
Date/Time: 12/13/2016 1:03:25 PM
Camera Top - 5.8 GHz n mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5745 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 1.41 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 8.69 V/m; Power Drift = -0.048 dB
Peak SAR (extrapolated) = 6.77 W/kg
SAR(1 g) = 1.22 mW/g; SAR(10 g) = 0.370 mW/g
Maximum value of SAR (measured) = 1.72 mW/g
Date/Time: 12/13/2016 12:20:53 PM
Camera Top - 5.8 GHz n mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5785 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 1.41 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 8.64 V/m; Power Drift = 0.166 dB
Peak SAR (extrapolated) = 7.27 W/kg
SAR(1 g) = 1.28 mW/g; SAR(10 g) = 0.377 mW/g
Maximum value of SAR (measured) = 1.82 mW/g
Date/Time: 12/13/2016 5:10:45 PM
other side up -5.8 GHz a mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x101x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.233 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 3.15 V/m; Power Drift = 0.285 dB
Peak SAR (extrapolated) = 0.510 W/kg
SAR(1 g) = 0.145 mW/g; SAR(10 g) = 0.062 mW/g
Maximum value of SAR (measured) = 0.236 mW/g
Date/Time: 12/13/2016 5:28:36 PM
other side up -5.8 GHz n mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 6.1 mho/m; εr = 50.61; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.13, 4.13, 4.13); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x101x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.233 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 2.82 V/m; Power Drift = 0.770 dB
Peak SAR (extrapolated) = 0.425 W/kg
SAR(1 g) = 0.141 mW/g; SAR(10 g) = 0.049 mW/g
Maximum value of SAR (measured) = 0.214 mW/g
Date/Time: 12/14/2016 8:53:57 AM
Antenna side up-2.4 GHz b mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.543 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 15.1 V/m; Power Drift = -0.757 dB
Peak SAR (extrapolated) = 0.865 W/kg
SAR(1 g) = 0.333 mW/g; SAR(10 g) = 0.126 mW/g
Maximum value of SAR (measured) = 0.502 mW/g
Date/Time: 12/14/2016 9:25:27 AM
Antenna side up-2.4 GHz g mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.396 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 12.5 V/m; Power Drift = -0.331 dB
Peak SAR (extrapolated) = 0.656 W/kg
SAR(1 g) = 0.256 mW/g; SAR(10 g) = 0.098 mW/g
Maximum value of SAR (measured) = 0.384 mW/g
Date/Time: 12/14/2016 10:40:24 AM
Camera Back-2.4 GHz b mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.064 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.59 V/m; Power Drift = 0.581 dB
Peak SAR (extrapolated) = 0.124 W/kg
SAR(1 g) = 0.047 mW/g; SAR(10 g) = 0.021 mW/g
Maximum value of SAR (measured) = 0.065 mW/g
Date/Time: 12/14/2016 11:28:55 AM
Camera Back-2.4 GHz g mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.072 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.29 V/m; Power Drift = 0.397 dB
Peak SAR (extrapolated) = 0.142 W/kg
SAR(1 g) = 0.060 mW/g; SAR(10 g) = 0.024 mW/g
Maximum value of SAR (measured) = 0.085 mW/g
Date/Time: 12/13/2016 7:34:17 PM
Camera top-2.4GHz b mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.927 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 18.4 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 1.64 W/kg
SAR(1 g) = 0.681 mW/g; SAR(10 g) = 0.269 mW/g
Maximum value of SAR (measured) = 0.931 mW/g
Date/Time: 12/13/2016 8:02:02 PM
Camera top-2.4GHz b mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2412 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.927 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 17.5 V/m; Power Drift = 0.031 dB
Peak SAR (extrapolated) = 1.57 W/kg
SAR(1 g) = 0.656 mW/g; SAR(10 g) = 0.259 mW/g
Maximum value of SAR (measured) = 0.917 mW/g
Date/Time: 12/13/2016 7:34:17 PM
Camera top-2.4GHz b mode Mid Channel 2
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2437 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.927 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 18.4 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 1.64 W/kg
SAR(1 g) = 0.681 mW/g; SAR(10 g) = 0.269 mW/g
Maximum value of SAR (measured) = 0.931 mW/g
Date/Time: 12/14/2016 12:36:00 PM
Camera top-2.4GHz BLE Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2412 MHz;Duty Cycle: 1:1.61
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.049 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.12 V/m; Power Drift = 0.613 dB
Peak SAR (extrapolated) = 0.095 W/kg
SAR(1 g) = 0.035 mW/g; SAR(10 g) = 0.013 mW/g
Maximum value of SAR (measured) = 0.051 mW/g
Date/Time: 12/13/2016 8:18:51 PM
Camera top-2.4GHz g mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.927 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 15.9 V/m; Power Drift = 0.034 dB
Peak SAR (extrapolated) = 1.32 W/kg
SAR(1 g) = 0.554 mW/g; SAR(10 g) = 0.220 mW/g
Maximum value of SAR (measured) = 0.784 mW/g
Date/Time: 12/13/2016 9:04:37 PM
Camera top-2.4GHz g mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2412 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.927 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 15.8 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 1.31 W/kg
SAR(1 g) = 0.544 mW/g; SAR(10 g) = 0.215 mW/g
Maximum value of SAR (measured) = 0.767 mW/g
Date/Time: 12/13/2016 8:50:15 PM
Camera top-2.4GHz g mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2437 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.927 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 17.9 V/m; Power Drift = 0.044 dB
Peak SAR (extrapolated) = 1.64 W/kg
SAR(1 g) = 0.686 mW/g; SAR(10 g) = 0.270 mW/g
Maximum value of SAR (measured) = 0.948 mW/g
Date/Time: 12/14/2016 10:40:24 AM
the other side up-2.4 GHz b mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.064 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.59 V/m; Power Drift = 0.581 dB
Peak SAR (extrapolated) = 0.124 W/kg
SAR(1 g) = 0.047 mW/g; SAR(10 g) = 0.021 mW/g
Maximum value of SAR (measured) = 0.065 mW/g
Date/Time: 12/14/2016 11:55:55 AM
the other side up-2.4 GHz g mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.31, 4.31, 4.31); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.081 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 4.24 V/m; Power Drift = 0.111 dB
Peak SAR (extrapolated) = 0.133 W/kg
SAR(1 g) = 0.059 mW/g; SAR(10 g) = 0.027 mW/g
Maximum value of SAR (measured) = 0.080 mW/g
Date/Time: 12/2/2016 1:11:15 PM
Camera left-5.8 GHz a mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.557 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 4.84 V/m; Power Drift = 0.347 dB
Peak SAR (extrapolated) = 1.18 W/kg
SAR(1 g) = 0.355 mW/g; SAR(10 g) = 0.120 mW/g
Maximum value of SAR (measured) = 0.561 mW/g
HEAD FLUID MEASUREMENTS
Date/Time: 12/2/2016 1:11:15 PM
Camera left-5.8 GHz n mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.557 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 4.84 V/m; Power Drift = 0.347 dB
Peak SAR (extrapolated) = 1.18 W/kg
SAR(1 g) = 0.355 mW/g; SAR(10 g) = 0.120 mW/g
Maximum value of SAR (measured) = 0.561 mW/g
Date/Time: 12/2/2016 2:37:27 PM
Camera left-5.8 GHz n mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5745 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Unnamed procedure/Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm
Maximum value of SAR (interpolated) = 0.609 mW/g
Unnamed procedure/Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 5.20 V/m; Power Drift = 0.216 dB
Peak SAR (extrapolated) = 1.28 W/kg
SAR(1 g) = 0.386 mW/g; SAR(10 g) = 0.131 mW/g
Maximum value of SAR (measured) = 0.595 mW/g
Date/Time: 12/2/2016 1:41:49 PM
Camera left-5.8 GHz n mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5785 MHz;Duty Cycle: 1:1
Medium parameters used: f =5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Unnamed procedure/Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm
Maximum value of SAR (interpolated) = 0.647 mW/g
Unnamed procedure/Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 5.09 V/m; Power Drift = 0.373 dB
Peak SAR (extrapolated) = 2.45 W/kg
SAR(1 g) = 0.498 mW/g; SAR(10 g) = 0.172 mW/g
Maximum value of SAR (measured) = 0.651 mW/g
Date/Time: 12/2/2016 6:54:39 PM
Camera Right -5.8 GHz a mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 5.1 mho/m; εr = 36.86; ρ = 1000 kg/
m3 Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.158 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 3.30 V/m; Power Drift = 0.616 dB
Peak SAR (extrapolated) = 0.358 W/kg
SAR(1 g) = 0.107 mW/g; SAR(10 g) = 0.041 mW/g
Maximum value of SAR (measured) = 0.161 mW/g
Date/Time: 12/2/2016 7:41:43 PM
Camera Right -5.8 GHz n mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 5.1 mho/m; εr = 36.86; ρ = 1000 kg/
m3 Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.158 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 3.93 V/m; Power Drift = 0.169 dB
Peak SAR (extrapolated) = 0.450 W/kg
SAR(1 g) = 0.135 mW/g; SAR(10 g) = 0.050 mW/g
Maximum value of SAR (measured) = 0.207 mW/g
Date/Time: 12/2/2016 10:25:47 AM
Camera top-5.8 GHz a mode High Channel 3rd
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f =5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 2.02 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 8.91 V/m; Power Drift = -0.085 dB
Peak SAR (extrapolated) = 8.20 W/kg
SAR(1 g) = 1.39 mW/g; SAR(10 g) = 0.396 mW/g
Maximum value of SAR (measured) = 2.02 mW/g
Date/Time: 12/2/2016 9:24:00 AM
Camera top-5.8 GHz a mode Low Channel 2nd
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5745 MHz;Duty Cycle: 1:1
Medium parameters used: f =5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 1.55 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 7.98 V/m; Power Drift = 0.335 dB
Peak SAR (extrapolated) = 6.42 W/kg
SAR(1 g) = 1.1 mW/g; SAR(10 g) = 0.314 mW/g
Maximum value of SAR (measured) = 1.63 mW/g
Date/Time: 12/1/2016 5:00:18 PM
Camera top-5.8 GHz a mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5785 MHz;Duty Cycle: 1:1
Medium parameters used: f =5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 2.15 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 9.68 V/m; Power Drift = -0.169 dB
Peak SAR (extrapolated) = 8.08 W/kg
SAR(1 g) = 1.43 mW/g; SAR(10 g) = 0.404 mW/g
Maximum value of SAR (measured) = 2.09 mW/g
Date/Time: 12/2/2016 11:06:03 AM
Camera top-5.8 GHz n mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5825 MHz;Duty Cycle: 1:1
Medium parameters used: f =5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 2.01 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 8.90 V/m; Power Drift = -0.113 dB
Peak SAR (extrapolated) = 8.09 W/kg
SAR(1 g) = 1.37 mW/g; SAR(10 g) = 0.387 mW/g
Maximum value of SAR (measured) = 1.98 mW/g
Date/Time: 12/2/2016 5:42:40 PM
Camera top-5.8 GHz n mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5745 MHz;Duty Cycle: 1:1
Medium parameters used: f =5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 2.52 mW/g
Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 10.1 V/m; Power Drift = -0.217 dB
Peak SAR (extrapolated) = 7.88 W/kg
SAR(1 g) = 1.39 mW/g; SAR(10 g) = 0.380 mW/g
Maximum value of SAR (measured) = 2.06 mW/g
Date/Time: 12/2/2016 11:37:08 AM
Camera top-5.8 GHz n mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 5785 MHz;Duty Cycle: 1:1
Medium parameters used: f =5750 MHz Head; σ = 5.1 mho/m; εr = 36.9; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: EX3DV4 - SN7385; ConvF(4.75, 4.75, 4.75); Calibrated: 3/2/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 2.14 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 9.10 V/m; Power Drift = 0.078 dB
Peak SAR (extrapolated) = 8.27 W/kg
SAR(1 g) = 1.43 mW/g; SAR(10 g) = 0.393 mW/g
Maximum value of SAR (measured) = 2.13 mW/g
Date/Time: 12/1/2016 3:30: 44 PM
Camera back-2.4GHz b mode High Channel-
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ =
1000 kg/m3 P hantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF( 4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SE MCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.059 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.08 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.094 W/kg
SAR(1 g) = 0.042 mW/g; SAR(10 g) = 0.019 mW/g
Maximum value of SAR (measured) = 0.057 mW/g
Camera back-2.4GHz g mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58;
ρ=1000 kg/m3 P hantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.059 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.08 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.094 W/kg
SAR(1 g) = 0.0391 mW/g; SAR(10 g) = 0.0175 mW/g
Maximum value of SAR (measured) = 0.057 mW/g
0 dB = 0.057mW/g
Date/Time: 12/1/2016 4:15:44 PM
Date/Time: 12/1/2016 12:20:11 PM
Camera left side-2.4GHz b mode high Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2450 MHz ;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head;σ = 1.69 mho/m; εr = 35.58; ρ =
1000 kg/m3 P hantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.465 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 13.3 V/m; Power Drift = -0.215 dB
Peak SAR (extrapolated) = 0.773 W/kg
SAR(1 g) = 0.296 mW/g; SAR(10 g) = 0.118 mW/g
Maximum value of SAR (measured) = 0.462 mW/g
Date/Time: 12/1/2016 12:55:50 PM
Camera left side-2.4GHz g mode high Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ =
1000 kg/m3 P hantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.570 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 14.0 V/m; Power Drift = 0.098 dB
Peak SAR (extrapolated) = 0.948 W/kg
SAR(1 g) = 0.368 mW/g; SAR(10 g) = 0.145 mW/g
Maximum value of SAR (measured) = 0.571 mW/g
Date/Time: 12/1/2016 2:11:48 PM
Camera Right side-2.4GHz b mode high Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.068 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 2.57 V/m; Power Drift = 1.06 dB
Peak SAR (extrapolated) = 0.099 W/kg
SAR(1 g) = 0.0409 mW/g; SAR(10 g) = 0.0184 mW/g
Maximum value of SAR (measured) = 0.059 mW/g
Date/Time: 12/1/2016 2:43:15 PM
Camera Right side-2.4GHz g mode high Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.064 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 2.75 V/m; Power Drift = 0.437 dB
Peak SAR (extrapolated) = 0.113 W/kg
SAR(1 g) = 0.0457 mW/g; SAR(10 g) = 0.0209mW/g
Maximum value of SAR (measured) = 0.066 mW/g
Date/Time: 11/30/2016 5:40:05 PM
Camera top-2.4GHz BLE Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1.61
Medium parameters used: f = 2450 MHz Head;σ = 1.69 mho/m; εr = 35.58; ρ =1000
kg/m3 P hantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.040 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.17 V/m; Power Drift = 0.395 dB
Peak SAR (extrapolated) = 0.100 W/kg
SAR(1 g) = 0.0269 mW/g; SAR(10 g) = 0.0108 mW/g
Maximum value of SAR (measured) = 0.041 mW/g
Date/Time: 11/30/2016 3:42:52 PM
Camera top-2.4GHz b mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.643 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 13.9 V/m; Power Drift = -0.050 dB
Peak SAR (extrapolated) = 1.08 W/kg
SAR(1 g) = 0.433 mW/g; SAR(10 g) = 0.177 mW/g
Maximum value of SAR (measured) = 0.641 mW/g
Date/Time: 11/30/2016 3:15:49 PM
Camera top-2.4GHz b mode low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2412MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.564 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 12.3 V/m; Power Drift = 0.020 dB
Peak SAR (extrapolated) = 0.914 W/kg
SAR(1 g) = 0.374 mW/g; SAR(10 g) = 0.154 mW/g
Maximum value of SAR (measured) = 0.555 mW/g
Date/Time: 11/30/2016 2:15:43 PM
Camera top-2.4GHz b mode mid channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2437 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 2mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.864 mW/g
Zoom Scan (7x7x8)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm
Reference Value = 14.2 V/m; Power Drift = -0.138 dB
Peak SAR (extrapolated) = 1.17 W/kg
SAR(1 g) = 0.451 mW/g; SAR(10 g) = 0.182 mW/g
Maximum value of SAR (measured) = 0.767 mW/g
Date/Time: 11/30/2016 5:13:07 PM
Camera top-2.4GHz g mode High Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2462 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head;σ = 1.69 mho/m; εr = 35.58; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.638 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 13.6 V/m; Power Drift = -0.029 dB
Peak SAR (extrapolated) = 1.05 W/kg
SAR(1 g) = 0.423 mW/g; SAR(10 g) = 0.172 mW/g
Maximum value of SAR (measured) = 0.628 mW/g
Date/Time: 11/30/2016 4:13:38 PM
Camera top-2.4GHz g mode Low Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2412 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.547 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 12.2 V/m; Power Drift = -0.020 dB
Peak SAR (extrapolated) = 0.874 W/kg
SAR(1 g) = 0.364 mW/g; SAR(10 g) = 0.15 mW/g
Maximum value of SAR (measured) = 0.533 mW/g
Date/Time: 11/30/2016 4:42:12 PM
Camera top-2.4GHz g mode Mid Channel
DUT: Camera top; Type: Body worn pov camera;
Communication System: CW; Frequency: 2437 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz Head; σ = 1.69 mho/m; εr = 35.58; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)
DASY4 Configuration:
zProbe: ES3DV3 - SN3035; ConvF(4.5, 4.5, 4.5); Calibrated: 5/17/2016
zSensor-Surface: 3mm (Mechanical Surface Detection)
zElectronics: DAE3 Sn493; Calibrated: 5/13/2016
zPhantom: SAM with CRP; Type: SAM;
zMeasurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145
Area Scan (61x141x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR
(interpolated) = 0.645 mW/g
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 13.4 V/m; Power Drift = -0.00 dB
Peak SAR (extrapolated) = 1.05 W/kg
SAR(1 g) = 0.424 mW/g; SAR(10 g) = 0.174 mW/g
Maximum value of SAR (measured) = 0.635 mW/g
Download: Body Worn POV Camera System RF Exposure Info TASER International
Mirror Download [FCC.gov]Body Worn POV Camera System RF Exposure Info TASER International
Document ID3252962
Application IDcLwif3EftMUVNBXgFR9OSA==
Document DescriptionSAR Appendix A SAR Meas Data
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize5639374
Date Submitted2017-01-09 00:00:00
Date Available2017-01-09 00:00:00
Creation Date2016-12-21 12:33:26
Producing SoftwareMicrosoft Word 2010
Document Lastmod2016-12-22 09:44:37
Document TitleNone
Document CreatorMicrosoft Word 2010
Document Author: Amanda Reed

Facebook Twitter Google+ RSS © FCCID.io 2017