Terminal Test Report 1 XAC Automation Corporation

XAC Automation Corporation Terminal

See More Details For FCC ID: MQT-T103WIFI3GT
Purchase on Amazon: Terminal
Download: Terminal Test Report 1 XAC Automation Corporation
Document DescriptionTest Report (WLAN) rev 2.pdf
Document TypeTest Report
Date Submitted2017-01-10 00:00:00
Producing SoftwareMicrosoft Office Word 2007
Document Title1

Document

Trouble Loading? Try Terminal Test Report 1 XAC Automation Corporation Downloading this document.
Report No.: RF131029E03H
Page No. 1 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
FCC Test Report
Report No.:
FCC ID:
Test Model:
Series Model:
Received Date:
Test Date:
Issued Date:
Applicant:
Address:
Issued By:
Lab Address:
Test Location (1):
Test Location (2):
This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report
must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.
Report No.: RF131029E03H
Page No. 2 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
Table of Contents
Release Control Record .................................................................................................................................. 4
1 Certificate of Conformity ...................................................................................................................... 5
2 Summary of Test Results ..................................................................................................................... 6
2.1 Measurement Uncertainty ................................................................................................................... 6
2.2 Modification Record ............................................................................................................................ 6
3 General Information .............................................................................................................................. 7
3.1 General Description of EUT ................................................................................................................ 7
3.2 Description of Test Modes ................................................................................................................... 9
3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10
3.3 Duty Cycle of Test Signal .................................................................................................................. 12
3.4 Description of Support Units ............................................................................................................. 13
3.4.1 Configuration of System under Test .................................................................................................. 14
3.5 General Description of Applied Standards ........................................................................................ 16
4 Test Types and Results ...................................................................................................................... 17
4.1 Radiated Emission and Bandedge Measurement ............................................................................. 17
4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 17
4.1.2 Test Instruments ................................................................................................................................ 18
4.1.3 Test Procedures ................................................................................................................................. 19
4.1.4 Deviation from Test Standard ............................................................................................................ 19
4.1.5 Test Setup .......................................................................................................................................... 20
4.1.6 EUT Operating Conditions ................................................................................................................. 21
4.1.7 Test Results ....................................................................................................................................... 22
4.2 Conducted Emission Measurement .................................................................................................. 35
4.2.1 Limits of Conducted Emission Measurement .................................................................................... 35
4.2.2 Test Instruments ................................................................................................................................ 35
4.2.3 Test Procedures ................................................................................................................................. 36
4.2.4 Deviation from Test Standard ............................................................................................................ 36
4.2.5 Test Setup .......................................................................................................................................... 36
4.2.6 EUT Operating Conditions ................................................................................................................. 36
4.2.7 Test Results ....................................................................................................................................... 37
4.3 6dB Bandwidth Measurement ........................................................................................................... 39
4.3.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 39
4.3.2 Test Setup .......................................................................................................................................... 39
4.3.3 Test Instruments ................................................................................................................................ 39
4.3.4 Test Procedure .................................................................................................................................. 39
4.3.5 Deviation fromTest Standard ............................................................................................................. 39
4.3.6 EUT Operating Conditions ................................................................................................................. 39
4.3.7 Test Result ......................................................................................................................................... 40
4.4 Conducted Output Power Measurement ........................................................................................... 42
4.4.1 Limits of Conducted Output Power Measurement ............................................................................ 42
4.4.2 Test Setup .......................................................................................................................................... 42
4.4.3 Test Instruments ................................................................................................................................ 42
4.4.4 Test Procedures ................................................................................................................................. 42
4.4.5 Deviation from Test Standard ............................................................................................................ 42
4.4.6 EUT Operating Conditions ................................................................................................................. 42
4.4.7 Test Results ....................................................................................................................................... 43
4.5 Power Spectral Density Measurement .............................................................................................. 45
4.5.1 Limits of Power Spectral Density Measurement ............................................................................... 45
4.5.2 Test Setup .......................................................................................................................................... 45
4.5.3 Test Instruments ................................................................................................................................ 45
4.5.4 Test Procedure .................................................................................................................................. 45
4.5.5 Deviation from Test Standard ............................................................................................................ 45
4.5.6 EUT Operating Condition .................................................................................................................. 45
Report No.: RF131029E03H
Page No. 3 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.5.7 Test Results ....................................................................................................................................... 46
4.6 Conducted Out of Band Emission Measurement .............................................................................. 48
4.6.1 Limits of Conducted Out of Band Emission Measurement................................................................ 48
4.6.2 Test Setup .......................................................................................................................................... 48
4.6.3 Test Instruments ................................................................................................................................ 48
4.6.4 Test Procedure .................................................................................................................................. 48
4.6.5 Deviation from Test Standard ............................................................................................................ 48
4.6.6 EUT Operating Condition .................................................................................................................. 49
4.6.7 Test Results ....................................................................................................................................... 49
5 Pictures of Test Arrangements .......................................................................................................... 54
Appendix Information on the Testing Laboratories ................................................................................ 55
Report No.: RF131029E03H
Page No. 4 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
Release Control Record
Issue No.
Description
Date Issued
RF131029E03H
Original release.
Dec. 07, 2016
Report No.: RF131029E03H
Page No. 5 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
1 Certificate of Conformity
Product:
Terminal
Brand:
XAC
Test Model:
xAPT-103WiFi.3G
Series Model:
xCE_T103WiFi.3G
Sample Status:
MASS-PRODUCTION
Applicant:
XAC AUTOMATION CORP.
Test Date:
Aug. 24 and Nov. 16 to Dec. 05, 2016
Standards:
47 CFR FCC Part 15, Subpart C (Section 15.247)
ANSI C63.10: 2013
The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s EMC characteristics under the conditions specified in this report.
Prepared by
:
, Date:
Dec. 07, 2016
Wendy Wu / Specialist
Approved by
:
, Date:
Dec. 07, 2016
May Chen / Manager
Report No.: RF131029E03H
Page No. 6 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
2 Summary of Test Results
47 CFR FCC Part 15, Subpart C (SECTION 15.247)
FCC
Clause
Test Item
Result
Remarks
15.207
AC Power Conducted Emission
PASS
Meet the requirement of limit.
Minimum passing margin is -16.23dB
at 0.15000MHz.
15.205 /
15.209 /
15.247(d)
Radiated Emissions and Band Edge
Measurement
PASS
Meet the requirement of limit.
Minimum passing margin is -0.3dB at
2483.50MHz.
15.247(d)
Antenna Port Emission
PASS
Meet the requirement of limit.
15.247(a)(2)
6dB bandwidth
PASS
Meet the requirement of limit.
15.247(b)
Conducted power
PASS
Meet the requirement of limit.
15.247(e)
Power Spectral Density
PASS
Meet the requirement of limit.
15.203
Antenna Requirement
PASS
No antenna connector is used.
2.1 Measurement Uncertainty
Where relevant, the following measurement uncertainty levels have been estimated for tests performed on
the EUT as specified in CISPR 16-4-2:
Measurement
Frequency
Expanded Uncertainty
(k=2) (±)
Conducted Emissions at mains ports
150kHz ~ 30MHz
1.83 dB
Radiated Emissions up to 1 GHz
30MHz ~ 1GHz
3.47 dB
Radiated Emissions above 1 GHz
1GHz ~ 6GHz
3.65 dB
6GHz ~ 18GHz
3.88 dB
18GHz ~ 40GHz
4.11 dB
2.2 Modification Record
There were no modifications required for compliance.
Report No.: RF131029E03H
Page No. 7 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
3 General Information
3.1 General Description of EUT
Product
Terminal
Brand
XAC
Test Model
xAPT-103WiFi.3G
Series Model
xCE_T103WiFi.3G
Status of EUT
MASS-PRODUCTION
Power Supply Rating
DC 12V from power adapter
Modulation Type
CCK, DQPSK, DBPSK for DSSS
64QAM, 16QAM, QPSK, BPSK for OFDM
Modulation Technology
DSSS, OFDM
Transfer Rate
802.11b: up to 11Mbps
802.11g: up to 54Mbps
802.11n: up to 150Mbps
Operating Frequency
2.412GHz ~ 2.462GHz
Number of Channel
802.11b, 802.11g, 802.11n (HT20): 11
802.11n (HT40): 7
Output Power
151.705mW
Antenna Type
Refer to Note
Antenna Connector
Refer to Note
Accessory Device
Adapter (Optional) x 1
Data Cable Supplied
NA
Note:
1. All models are listed as below.
Brand
Model
Difference
XAC
xAPT-103WiFi.3G
For marketing requirement
xCE_T103WiFi.3G
From the above models, model: xAPT-103WiFi.3G was selected as representative model for the test and its
data was recorded in this report.
2. The EUT is a WLAN, RFID, GSM and WCDMA device.
3. WLAN, RFID, GSM and WCDMA technology cannot transmit at same time.
4. The EUT power needs to be supplied from one power adapter, the information is as below table:
Brand:
DELTA
Model No.:
ADP-36PH B
Input power :
AC100-240V, 1A, 50-60Hz
AC input cable (Unshielded, 1.75m)
Output power :
DC 12V, 3A
DC output cable (Unshielded, 0.9 m with one core)
Report No.: RF131029E03H
Page No. 8 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
5. The antennas provided to the EUT, please refer to the following table:
RFID Antenna Spec.
Brand
Model No.
Antenna
Type
Antenna
Connector
Gain(dBi)
Frequency
(MHz)
XAC
PCB ENIG ANT BOARD
(W/KEY) 8006(ROHS)
Loop
Antenna
NA
13
13.56
GPRS / WCDMA(UMTS) / HSDPA / EDGE Antenna Spec.
Brand
Model No.
Antenna
Type
Antenna
Connector
Gain(dBi)
Frequency
(MHz)
Ethertronics Inc.
T-000084-01
FPCB
NA
0.14
850
2.57
1900
WLAN Antenna Spec.
Brand
Model No.
Antenna Type
Antenna
Connector
Antenna Gain(dBi)
<Including cable loss>
Frequency
(MHz)
ACX
AT3216-T2R4
PAA
Chip
NA
1.5
2400-2500
6. The EUT incorporates a SISO function.
MODULATION
MODE
DATA RATE (MCS)
TX & RX CONFIGURATION
802.11b
1 ~ 11Mbps
1TX
1RX
802.11g
6 ~ 54Mbps
1TX
1RX
802.11n (HT20)
MCS 0~7
1TX
1RX
802.11n (HT40)
MCS 0~7
1TX
1RX
7. The above EUT information is declared by manufacturer and for more detailed features description,
please refer to the manufacturer's specifications or user's manual.
Report No.: RF131029E03H
Page No. 9 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
3.2 Description of Test Modes
11 channels are provided for 802.11b, 802.11g and 802.11n (HT20):
Channel
Frequency
Channel
Frequency
1
2412MHz
7
2442MHz
2
2417MHz
8
2447MHz
3
2422MHz
9
2452MHz
4
2427MHz
10
2457MHz
5
2432MHz
11
2462MHz
6
2437MHz
7 channels are provided for 802.11n (HT40):
Channel
Frequency
Channel
Frequency
3
2422MHz
7
2442MHz
4
2427MHz
8
2447MHz
5
2432MHz
9
2452MHz
6
2437MHz
Report No.: RF131029E03H
Page No. 10 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
3.2.1 Test Mode Applicability and Tested Channel Detail
EUT
CONFIGURE
MODE
APPLICABLE TO
DESCRIPTION
RE1G
RE<1G
PLC
APCM
-
-
Where
RE1G: Radiated Emission above 1GHz &
Bandedge Measurement
RE<1G: Radiated Emission below 1GHz
PLC: Power Line Conducted Emission
APCM: Antenna Port Conducted Measurement
NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane.
NOTE: -means no effect.
Radiated Emission Test (Above 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity
architecture).
Following channel(s) was (were) selected for the final test as listed below.
MODE
AVAILABLE
CHANNEL
TESTED
CHANNEL
MODULATION
TECHNOLOGY
MODULATION
TYPE
DATA RATE
(Mbps)
802.11b
1 to 11
1, 6, 11
DSSS
DBPSK
1
802.11g
1 to 11
1, 6, 11
OFDM
BPSK
6
802.11n (HT20)
1 to 11
1, 6, 11
OFDM
BPSK
6.5
802.11n (HT40)
3 to 9
3, 6, 9
OFDM
BPSK
13.5
Radiated Emission Test (Below 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity
architecture).
Following channel(s) was (were) selected for the final test as listed below.
MODE
AVAILABLE
CHANNEL
TESTED
CHANNEL
MODULATION
TECHNOLOGY
MODULATION
TYPE
DATA RATE
(Mbps)
802.11g
1 to 11
6
OFDM
BPSK
6
Power Line Conducted Emission Test:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity
architecture).
Following channel(s) was (were) selected for the final test as listed below.
MODE
AVAILABLE
CHANNEL
TESTED
CHANNEL
MODULATION
TECHNOLOGY
MODULATION
TYPE
DATA RATE
(Mbps)
802.11g
1 to 11
6
OFDM
BPSK
6
Report No.: RF131029E03H
Page No. 11 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
Antenna Port Conducted Measurement:
This item includes all test value of each mode, but only includes spectrum plot of worst value of each
mode.
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity
architecture).
Following channel(s) was (were) selected for the final test as listed below.
MODE
AVAILABLE
CHANNEL
TESTED
CHANNEL
MODULATION
TECHNOLOGY
MODULATION
TYPE
DATA RATE
(Mbps)
802.11b
1 to 11
1, 6, 11
DSSS
DBPSK
1
802.11g
1 to 11
1, 6, 11
OFDM
BPSK
6
802.11n (HT20)
1 to 11
1, 6, 11
OFDM
BPSK
6.5
802.11n (HT40)
3 to 9
3, 6, 9
OFDM
BPSK
13.5
Test Condition:
APPLICABLE TO
ENVIRONMENTAL CONDITIONS
INPUT POWER
TESTED BY
RE1G
24deg. C, 69%RH
120Vac, 60Hz
Weiwei Lo
RE<1G
25deg. C, 67%RH
120Vac, 60Hz
Weiwei Lo
PLC
24deg. C, 71%RH
120Vac, 60Hz
Andy Ho
APCM
25deg. C, 60%RH
120Vac, 60Hz
Anderson Chen
Report No.: RF131029E03H
Page No. 12 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
3.3 Duty Cycle of Test Signal
Duty cycle of test signal is 100 %, duty factor is not required.
802.11b
802.11g
802.11n (HT20)
802.11n (HT40)
Report No.: RF131029E03H
Page No. 13 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
3.4 Description of Support Units
The EUT has been tested as an independent unit together with other necessary accessories or support units.
The following support units or accessories were used to form a representative test configuration during the
tests.
No.
Product
Brand
Model No.
Serial No.
FCC ID
Remark
A
Adapter
DELTA
ADP-36PH B
NA
NA
Supplied by Client
B
iPod shuffle
Apple
MC749TA/A
CC4DN25WDFDM
NA
Provided by Lab
C
iPod shuffle
Apple
MD778TA/A
CC4JMA9KF4T1
NA
Provided by Lab
D
Laptop
DELL
E6420
482T3R1
FCC DoC
Provided by Lab
E
Telephone
WONDER
WD-303
7C17KA 05211
NA
Provided by Lab
F
Micro SD Card
SanDisk
2G
NA
NA
Provided by Lab
Note:
All power cords of the above support units are non-shielded (1.8m).
ID
Descriptions
Qty.
Length (m)
Shielding
(Yes/No)
Cores (Qty.)
Remarks
1
DC Cable
1
0.9
No
1
Supplied by client
2
AC Cable
1
1.75
No
0
Supplied by client
3
USB Cable
1
0.1
Yes
0
Provided by Lab
4
USB Cable
1
0.1
Yes
0
Provided by Lab
5
RJ-45 Cable
1
10
No
0
Provided by Lab
6
RJ-11 Cable
1
10
No
0
Provided by Lab
7
Console Cable
1
1.5
No
1
Supplied by client
Note: The core(s) is(are) originally attached to the cable(s).
Report No.: RF131029E03H
Page No. 14 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
3.4.1 Configuration of System under Test
For conducted emission test
Note: Micro USB port for F/W update.
Report No.: RF131029E03H
Page No. 15 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
For radiated emission test
Note: Micro USB port for F/W update.
Report No.: RF131029E03H
Page No. 16 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
3.5 General Description of Applied Standards
The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the
requirements of the following standards:
FCC Part 15, Subpart C (15.247)
KDB 558074 D01 DTS Meas Guidance v03r05
ANSI C63.10-2013
All test items have been performed and recorded as per the above standards.
Report No.: RF131029E03H
Page No. 17 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4 Test Types and Results
4.1 Radiated Emission and Bandedge Measurement
4.1.1 Limits of Radiated Emission and Bandedge Measurement
Radiated emissions which fall in the restricted bands must comply with the radiated emission limits
specified as below table. Other emissions shall be at least 20dB below the highest level of the desired
power:
Frequencies
(MHz)
Field Strength
(microvolts/meter)
Measurement Distance
(meters)
0.009 ~ 0.490
2400/F(kHz)
300
0.490 ~ 1.705
24000/F(kHz)
30
1.705 ~ 30.0
30
30
30 ~ 88
100
3
88 ~ 216
150
3
216 ~ 960
200
3
Above 960
500
3
NOTE:
1. The lower limit shall apply at the transition frequencies.
2. Emission level (dBuV/m) = 20 log Emission level (uV/m).
3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the
peak field strength of any emission shall not exceed the maximum permitted average limits, specified
above by more than 20dB under any condition of modulation.
Report No.: RF131029E03H
Page No. 18 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.1.2 Test Instruments
DESCRIPTION &
MANUFACTURER
MODEL NO.
SERIAL NO.
CALIBRATED
DATE
CALIBRATED
UNTIL
Test Receiver
Agilent
N9038A
MY50010156
Aug. 18, 2016
Aug. 17, 2017
Pre-Amplifier(*)
EMCI
EMC001340
980142
Jan. 20, 2016
Jan. 19, 2018
Loop Antenna(*)
Electro-Metrics
EM-6879
264
Dec. 16, 2014
Dec. 15, 2016
RF Cable
NA
LOOPCAB-001
LOOPCAB-002
Jan. 18, 2016
Jan. 17, 2017
Pre-Amplifier
Mini-Circuits
ZFL-1000VH2B
AMP-ZFL-05
May 07, 2016
May 06, 2017
Trilog Broadband Antenna
SCHWARZBECK
VULB 9168
9168-156
Jan. 04, 2016
Jan. 03, 2017
RF Cable
8D
966-3-1
966-3-2
966-3-3
Apr. 02, 2016
Apr. 01, 2017
Fixed attenuator
Mini-Circuits
UNAT-5+
PAD-3m-3-01
Oct. 05, 2016
Oct. 04, 2017
Software
ADT_Radiated_V8.7.08
NA
NA
NA
Antenna Tower & Turn Table
Max-Full
MF-7802
MF780208406
NA
NA
Horn_Antenna
SCHWARZBECK
BBHA9120-D
9120D-406
Jan. 20, 2016
Jan. 19, 2017
Pre-Amplifier
Agilent
8449B
3008A02465
Apr. 05, 2016
Apr. 04, 2017
RF Cable
EMC104-SM-SM-2000
EMC104-SM-SM-5000
EMC104-SM-SM-5000
150317
150321
150322
Mar. 30, 2016
Mar. 29, 2017
Spectrum Analyzer
Keysight
N9030A
MY54490520
July 29, 2016
July 28, 2017
Pre-Amplifier
EMCI
EMC184045
980143
Jan. 15, 2016
Jan. 14, 2017
Horn_Antenna
SCHWARZBECK
BBHA 9170
BBHA9170608
Jan. 08, 2016
Jan. 07, 2017
RF Cable
SUCOFLEX 102
36432/2
36441/2
Jan. 16, 2016
Jan. 15, 2017
Software
ADT_Radiated_V8.7.08
NA
NA
NA
Antenna Tower & Turn Table
Max-Full
MF-7802
MF780208406
NA
NA
Boresight Antenna Fixture
FBA-01
FBA-SIP01
NA
NA
Note:
1.
The calibration interval of the above test instruments is 12 months and the calibrations are
traceable to NML/ROC and NIST/USA.
2.
*The calibration interval of the above test instruments is 24 months and the calibrations are
traceable to NML/ROC and NIST/USA.
3.
The test was performed in 966 Chamber No. 3.
4.
The FCC Site Registration No. is 147459
5
Loop antenna was used for all emissions below 30 MHz.
6.
The CANADA Site Registration No. is 20331-1
7.
Tested Date: Nov. 16 to Dec. 05, 2016
Report No.: RF131029E03H
Page No. 19 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.1.3 Test Procedures
For Radiated emission below 30MHz
a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber
room. The table was rotated 360 degrees to determine the position of the highest radiation.
b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top
of a variable-height antenna tower.
c. Both X and Y axes of the antenna are set to make the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned
from 0 degrees to 360 degrees to find the maximum reading.
e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with
Maximum Hold Mode.
NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency
below 30MHz.
For Radiated emission above 30MHz
a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above
1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to
determine the position of the highest radiation.
b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top
of a variable-height antenna tower.
c. The height of antenna is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to
make the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned
to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to
find the maximum reading.
e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum
hold mode when the test frequency is below 1 GHz.
f. The test-receiver system was set to peak and average detect function and specified bandwidth with
maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets
average limit, measurement with the average detector is unnecessary.
Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for
Quasi-peak detection (QP) at frequency below 1GHz.
2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz
for Peak detection (PK) at frequency above 1GHz.
3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T
(Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz.
4. All modes of operation were investigated and the worst-case emissions are reported.
4.1.4 Deviation from Test Standard
No deviation.
Report No.: RF131029E03H
Page No. 20 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.1.5 Test Setup
For Radiated emission below 30MHz
For Radiated emission 30MHz to 1GHz
10m
Ant. Tower 1-4m
Variable
Turn Table
EUT&
Support Units
Ground Plane
Test Receiver
80cm
3m
1 m
Turn Table
EUT&
Support Units
Ground Plane
Test Receiver
80cm
3m
Report No.: RF131029E03H
Page No. 21 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
For Radiated emission above 1GHz
For the actual test configuration, please refer to the attached file (Test Setup Photo).
4.1.6 EUT Operating Conditions
1. The communication partner run test program “REALTEK 11n 8188EUS USB WLAN NIC Massproduction
Kit to enable EUT under transmission/receiving condition continuously at specific channel frequency.
3m
1-4m
Variable
Turn Table
EUT&
Support Units
Ground Plane
Test Receiver
150cm
Absorber
Ant. Tower
Report No.: RF131029E03H
Page No. 22 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.1.7 Test Results
Above 1GHz Data
802.11b
CHANNEL
TX Channel 1
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
2390.00
53.3 PK
74.0
-20.7
1.78 H
238
57.5
-4.2
2
2390.00
45.8 AV
54.0
-8.2
1.78 H
238
50.0
-4.2
3
*2412.00
104.4 PK
1.74 H
228
108.5
-4.1
4
*2412.00
102.2 AV
1.74 H
228
106.3
-4.1
5
4824.00
54.3 PK
74.0
-19.7
1.30 H
340
52.0
2.3
6
4824.00
51.4 AV
54.0
-2.6
1.30 H
340
49.1
2.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
2390.00
53.5 PK
74.0
-20.5
1.31 V
235
57.7
-4.2
2
2390.00
44.9 AV
54.0
-9.1
1.31 V
235
49.1
-4.2
3
*2412.00
105.5 PK
1.29 V
218
109.6
-4.1
4
*2412.00
102.8 AV
1.29 V
218
106.9
-4.1
5
4824.00
52.8 PK
74.0
-21.2
1.42 V
342
50.5
2.3
6
4824.00
46.5 AV
54.0
-7.5
1.42 V
342
44.2
2.3
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 23 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
CHANNEL
TX Channel 6
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2437.00
104.6 PK
1.74 H
246
108.6
-4.0
2
*2437.00
101.9 AV
1.74 H
246
105.9
-4.0
3
4874.00
54.5 PK
74.0
-19.5
1.64 H
32
52.0
2.5
4
4874.00
47.1 AV
54.0
-6.9
1.64 H
32
44.6
2.5
5
7311.00
58.3 PK
74.0
-15.7
1.47 H
22
49.4
8.9
6
7311.00
44.3 AV
54.0
-9.7
1.47 H
22
35.4
8.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2437.00
105.5 PK
1.49 V
221
109.5
-4.0
2
*2437.00
103.1 AV
1.49 V
221
107.1
-4.0
3
4874.00
52.4 PK
74.0
-21.6
1.06 V
360
49.9
2.5
4
4874.00
42.3 AV
54.0
-11.7
1.06 V
360
39.8
2.5
5
7311.00
56.4 PK
74.0
-17.6
1.46 V
25
47.5
8.9
6
7311.00
44.6 AV
54.0
-9.4
1.46 V
25
35.7
8.9
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 24 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
CHANNEL
TX Channel 11
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2462.00
103.2 PK
1.83 H
238
107.3
-4.1
2
*2462.00
101.8 AV
1.83 H
238
105.9
-4.1
3
2483.50
53.2 PK
74.0
-20.8
1.75 H
243
57.2
-4.0
4
2483.50
42.2 AV
54.0
-11.8
1.75 H
243
46.2
-4.0
5
4924.00
55.1 PK
74.0
-18.9
1.47 H
40
52.6
2.5
6
4924.00
49.4 AV
54.0
-4.6
1.47 H
40
46.9
2.5
7
7386.00
57.8 PK
74.0
-16.2
1.48 H
42
48.5
9.3
8
7386.00
44.9 AV
54.0
-9.1
1.48 H
42
35.6
9.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2462.00
104.5 PK
1.27 V
219
108.6
-4.1
2
*2462.00
102.6 AV
1.27 V
219
106.7
-4.1
3
2483.50
53.6 PK
74.0
-20.4
1.18 V
208
57.6
-4.0
4
2483.50
42.4 AV
54.0
-11.6
1.18 V
208
46.4
-4.0
5
4924.00
51.1 PK
74.0
-22.9
1.01 V
352
48.6
2.5
6
4924.00
41.6 AV
54.0
-12.4
1.01 V
352
39.1
2.5
7
7386.00
58.0 PK
74.0
-16.0
1.51 V
46
48.7
9.3
8
7386.00
45.7 AV
54.0
-8.3
1.51 V
46
36.4
9.3
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 25 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
802.11g
CHANNEL
TX Channel 1
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
2390.00
66.4 PK
74.0
-7.6
1.75 H
247
70.6
-4.2
2
2390.00
49.0 AV
54.0
-5.0
1.75 H
247
53.2
-4.2
3
*2412.00
104.4 PK
1.81 H
252
108.5
-4.1
4
*2412.00
95.0 AV
1.81 H
252
99.1
-4.1
5
4824.00
52.4 PK
74.0
-21.6
1.34 H
345
50.1
2.3
6
4824.00
39.4 AV
54.0
-14.6
1.34 H
345
37.1
2.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
2390.00
70.1 PK
74.0
-3.9
1.51 V
191
74.3
-4.2
2
2390.00
51.8 AV
54.0
-2.2
1.51 V
191
56.0
-4.2
3
*2412.00
105.8 PK
1.54 V
200
109.9
-4.1
4
*2412.00
95.9 AV
1.54 V
200
100.0
-4.1
5
4824.00
50.4 PK
74.0
-23.6
1.33 V
10
48.1
2.3
6
4824.00
38.3 AV
54.0
-15.7
1.33 V
10
36.0
2.3
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 26 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
CHANNEL
TX Channel 6
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2437.00
105.5 PK
1.71 H
252
109.5
-4.0
2
*2437.00
96.7 AV
1.71 H
252
100.7
-4.0
3
4874.00
52.6 PK
74.0
-21.4
1.31 H
360
50.1
2.5
4
4874.00
40.0 AV
54.0
-14.0
1.31 H
360
37.5
2.5
5
7311.00
58.4 PK
74.0
-15.6
1.34 H
348
49.5
8.9
6
7311.00
44.2 AV
54.0
-9.8
1.34 H
348
35.3
8.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2437.00
107.7 PK
1.46 V
172
111.7
-4.0
2
*2437.00
98.2 AV
1.46 V
172
102.2
-4.0
3
4874.00
50.8 PK
74.0
-23.2
1.26 V
7
48.3
2.5
4
4874.00
37.9 AV
54.0
-16.1
1.26 V
7
35.4
2.5
5
7311.00
57.9 PK
74.0
-16.1
1.23 V
26
49.0
8.9
6
7311.00
44.0 AV
54.0
-10.0
1.23 V
26
35.1
8.9
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 27 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
CHANNEL
TX Channel 11
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2462.00
105.3 PK
1.79 H
267
109.4
-4.1
2
*2462.00
96.4 AV
1.79 H
267
100.5
-4.1
3
2483.50
70.8 PK
74.0
-3.2
1.72 H
275
74.8
-4.0
4
2483.50
51.4 AV
54.0
-2.6
1.72 H
275
55.4
-4.0
5
4924.00
51.5 PK
74.0
-22.5
1.33 H
337
49.0
2.5
6
4924.00
38.8 AV
54.0
-15.2
1.33 H
337
36.3
2.5
7
7386.00
58.9 PK
74.0
-15.1
1.40 H
360
49.6
9.3
8
7386.00
44.6 AV
54.0
-9.4
1.40 H
360
35.3
9.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2462.00
108.1 PK
1.55 V
200
112.2
-4.1
2
*2462.00
98.1 AV
1.55 V
200
102.2
-4.1
3
2483.50
72.0 PK
74.0
-2.0
1.66 V
195
76.0
-4.0
4
2483.50
53.2 AV
54.0
-0.8
1.66 V
195
57.2
-4.0
5
4924.00
50.3 PK
74.0
-23.7
1.27 V
21
47.8
2.5
6
4924.00
37.7 AV
54.0
-16.3
1.27 V
21
35.2
2.5
7
7386.00
58.3 PK
74.0
-15.7
1.15 V
11
49.0
9.3
8
7386.00
44.5 AV
54.0
-9.5
1.15 V
11
35.2
9.3
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 28 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
802.11n (HT20)
CHANNEL
TX Channel 1
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
2390.00
68.1 PK
74.0
-5.9
1.93 H
203
72.3
-4.2
2
2390.00
46.5 AV
54.0
-7.5
1.93 H
203
50.7
-4.2
3
*2412.00
100.7 PK
1.98 H
206
104.8
-4.1
4
*2412.00
91.1 AV
1.98 H
206
95.2
-4.1
5
4824.00
52.6 PK
74.0
-21.4
1.27 H
360
50.3
2.3
6
4824.00
39.7 AV
54.0
-14.3
1.27 H
360
37.4
2.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
2390.00
71.8 PK
74.0
-2.2
1.61 V
190
76.0
-4.2
2
2390.00
49.3 AV
54.0
-4.7
1.61 V
190
53.5
-4.2
3
*2412.00
103.6 PK
1.62 V
203
107.7
-4.1
4
*2412.00
94.3 AV
1.62 V
203
98.4
-4.1
5
4824.00
50.4 PK
74.0
-23.6
1.32 V
3
48.1
2.3
6
4824.00
38.5 AV
54.0
-15.5
1.32 V
3
36.2
2.3
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 29 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
CHANNEL
TX Channel 6
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2437.00
102.4 PK
1.36 H
329
106.4
-4.0
2
*2437.00
92.7 AV
1.36 H
329
96.7
-4.0
3
4874.00
52.9 PK
74.0
-21.1
1.35 H
352
50.4
2.5
4
4874.00
40.0 AV
54.0
-14.0
1.35 H
352
37.5
2.5
5
7311.00
58.3 PK
74.0
-15.7
1.32 H
341
49.4
8.9
6
7311.00
43.6 AV
54.0
-10.4
1.32 H
341
34.7
8.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2437.00
105.1 PK
1.47 V
183
109.1
-4.0
2
*2437.00
95.8 AV
1.47 V
183
99.8
-4.0
3
4874.00
49.9 PK
74.0
-24.1
1.25 V
17
47.4
2.5
4
4874.00
37.0 AV
54.0
-17.0
1.25 V
17
34.5
2.5
5
7311.00
59.1 PK
74.0
-14.9
1.16 V
10
50.2
8.9
6
7311.00
44.9 AV
54.0
-9.1
1.16 V
10
36.0
8.9
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 30 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
CHANNEL
TX Channel 11
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2462.00
103.1 PK
1.36 H
337
107.2
-4.1
2
*2462.00
93.5 AV
1.36 H
337
97.6
-4.1
3
2483.50
68.0 PK
74.0
-6.0
1.39 H
346
72.0
-4.0
4
2483.50
49.8 AV
54.0
-4.2
1.39 H
346
53.8
-4.0
5
4924.00
52.8 PK
74.0
-21.2
1.34 H
360
50.3
2.5
6
4924.00
39.5 AV
54.0
-14.5
1.34 H
360
37.0
2.5
7
7386.00
59.1 PK
74.0
-14.9
1.32 H
339
49.8
9.3
8
7386.00
44.5 AV
54.0
-9.5
1.32 H
339
35.2
9.3
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2462.00
106.0 PK
1.50 V
190
110.1
-4.1
2
*2462.00
96.6 AV
1.50 V
190
100.7
-4.1
3
2483.50
72.1 PK
74.0
-1.9
1.56 V
184
76.1
-4.0
4
2483.50
53.7 AV
54.0
-0.3
1.56 V
184
57.7
-4.0
5
4924.00
50.4 PK
74.0
-23.6
1.26 V
24
47.9
2.5
6
4924.00
38.0 AV
54.0
-16.0
1.26 V
24
35.5
2.5
7
7386.00
58.3 PK
74.0
-15.7
1.19 V
11
49.0
9.3
8
7386.00
44.5 AV
54.0
-9.5
1.19 V
11
35.2
9.3
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 31 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
802.11n (HT40)
CHANNEL
TX Channel 3
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
2390.00
69.6 PK
74.0
-4.4
2.02 H
199
73.8
-4.2
2
2390.00
51.0 AV
54.0
-3.0
2.02 H
199
55.2
-4.2
3
*2422.00
99.7 PK
1.99 H
214
103.8
-4.1
4
*2422.00
89.6 AV
1.99 H
214
93.7
-4.1
5
4844.00
51.9 PK
74.0
-22.1
1.28 H
360
49.6
2.3
6
4844.00
38.9 AV
54.0
-15.1
1.28 H
360
36.6
2.3
7
7266.00
59.1 PK
74.0
-14.9
1.33 H
360
50.3
8.8
8
7266.00
45.0 AV
54.0
-9.0
1.33 H
360
36.2
8.8
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
2390.00
70.3 PK
74.0
-3.7
1.60 V
203
74.5
-4.2
2
2390.00
53.3 AV
54.0
-0.7
1.60 V
203
57.5
-4.2
3
*2422.00
104.3 PK
1.51 V
185
108.4
-4.1
4
*2422.00
94.5 AV
1.51 V
185
98.6
-4.1
5
4844.00
50.9 PK
74.0
-23.1
1.20 V
0
48.6
2.3
6
4844.00
38.0 AV
54.0
-16.0
1.20 V
0
35.7
2.3
7
7266.00
58.1 PK
74.0
-15.9
1.22 V
31
49.3
8.8
8
7266.00
44.1 AV
54.0
-9.9
1.22 V
31
35.3
8.8
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 32 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
CHANNEL
TX Channel 6
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2437.00
99.0 PK
2.14 H
208
103.0
-4.0
2
*2437.00
89.4 AV
2.14 H
208
93.4
-4.0
3
4874.00
52.4 PK
74.0
-21.6
1.37 H
357
49.9
2.5
4
4874.00
39.4 AV
54.0
-14.6
1.37 H
357
36.9
2.5
5
7311.00
58.8 PK
74.0
-15.2
1.31 H
360
49.9
8.9
6
7311.00
44.4 AV
54.0
-9.6
1.31 H
360
35.5
8.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2437.00
102.7 PK
1.43 V
191
106.7
-4.0
2
*2437.00
92.8 AV
1.43 V
191
96.8
-4.0
3
4874.00
49.9 PK
74.0
-24.1
1.15 V
5
47.4
2.5
4
4874.00
37.5 AV
54.0
-16.5
1.15 V
5
35.0
2.5
5
7311.00
59.3 PK
74.0
-14.7
1.23 V
32
50.4
8.9
6
7311.00
45.4 AV
54.0
-8.6
1.23 V
32
36.5
8.9
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 33 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
CHANNEL
TX Channel 9
DETECTOR
FUNCTION
Peak (PK)
Average (AV)
FREQUENCY RANGE
1GHz ~ 25GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2452.00
99.7 PK
1.95 H
204
103.8
-4.1
2
*2452.00
89.4 AV
1.95 H
204
93.5
-4.1
3
2483.50
70.0 PK
74.0
-4.0
1.99 H
202
74.0
-4.0
4
2483.50
50.8 AV
54.0
-3.2
1.99 H
202
54.8
-4.0
5
4904.00
53.3 PK
74.0
-20.7
1.39 H
360
50.8
2.5
6
4904.00
39.8 AV
54.0
-14.2
1.39 H
360
37.3
2.5
7
7356.00
58.1 PK
74.0
-15.9
1.32 H
346
48.9
9.2
8
7356.00
44.1 AV
54.0
-9.9
1.32 H
346
34.9
9.2
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
*2452.00
103.1 PK
1.41 V
190
107.2
-4.1
2
*2452.00
93.2 AV
1.41 V
190
97.3
-4.1
3
2483.50
71.7 PK
74.0
-2.3
1.41 V
190
75.7
-4.0
4
2483.50
53.2 AV
54.0
-0.8
1.41 V
190
57.2
-4.0
5
4904.00
49.9 PK
74.0
-24.1
1.26 V
25
47.4
2.5
6
4904.00
37.6 AV
54.0
-16.4
1.26 V
25
35.1
2.5
7
7356.00
58.4 PK
74.0
-15.6
1.22 V
28
49.2
9.2
8
7356.00
44.2 AV
54.0
-9.8
1.22 V
28
35.0
9.2
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
5. " * ": Fundamental frequency.
Report No.: RF131029E03H
Page No. 34 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
Below 1GHz Data:
802.11g
CHANNEL
TX Channel 6
DETECTOR
FUNCTION
Quasi-Peak (QP)
FREQUENCY RANGE
9kHz ~ 1GHz
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
155.98
40.1 QP
43.5
-3.4
2.00 H
70
48.5
-8.4
2
203.99
39.0 QP
43.5
-4.5
1.50 H
309
50.5
-11.5
3
252.00
45.6 QP
46.0
-0.4
1.00 H
290
55.0
-9.4
4
266.66
44.7 QP
46.0
-1.3
1.00 H
300
53.3
-8.6
5
426.68
37.9 QP
46.0
-8.1
1.00 H
305
41.9
-4.0
6
533.33
37.9 QP
46.0
-8.1
1.50 H
47
39.8
-1.9
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
NO.
FREQ.
(MHz)
EMISSION
LEVEL
(dBuV/m)
LIMIT
(dBuV/m)
MARGIN
(dB)
ANTENNA
HEIGHT
(m)
TABLE
ANGLE
(Degree)
RAW
VALUE
(dBuV)
CORRECTION
FACTOR
(dB/m)
1
60.00
38.6 QP
40.0
-1.4
1.00 V
143
47.3
-8.7
2
204.02
39.1 QP
43.5
-4.4
1.00 V
202
50.6
-11.5
3
252.01
45.0 QP
46.0
-1.0
1.50 V
360
54.4
-9.4
4
426.68
40.4 QP
46.0
-5.6
1.50 V
295
44.4
-4.0
5
500.01
39.4 QP
46.0
-6.6
1.00 V
110
41.7
-2.3
6
613.36
35.4 QP
46.0
-10.6
1.00 V
345
35.2
0.2
REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level Limit value
Report No.: RF131029E03H
Page No. 35 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.2 Conducted Emission Measurement
4.2.1 Limits of Conducted Emission Measurement
Frequency (MHz)
Conducted Limit (dBuV)
Quasi-peak
Average
0.15 - 0.5
66 - 56
56 - 46
0.50 - 5.0
56
46
5.0 - 30.0
60
50
Note: 1. The lower limit shall apply at the transition frequencies.
2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz.
4.2.2 Test Instruments
Note:
1.
The calibration interval of the above test instruments are 12 months and the calibrations are
traceable to NML/ROC and NIST/USA.
2.
The test was performed in Shielded Room No. 1.
3
Tested Date:Nov. 24, 2016
DESCRIPTION &
MANUFACTURER
MODEL NO.
SERIAL NO.
CALIBRATED
DATE
CALIBRATED
UNTIL
Test Receiver
R&S
ESCS 30
847124/029
Oct. 24, 2016
Oct. 23, 2017
Line-Impedance
Stabilization Network
(for EUT)
R&S
ESH3-Z5
848773/004
Oct. 26, 2016
Oct. 25, 2017
Line-Impedance
Stabilization Network
(for Peripheral)
R&S
ENV216
100072
June 13, 2016
June 12, 2017
RF Cable
5D-FB
COCCAB-001
Sep. 30, 2016
Sep. 29, 2017
10 dB PAD
Mini-Circuits
HAT-10+
CONATT-004
June 20, 2016
June 19, 2017
Software
BVADT
BVADT_Cond_
V7.3.7.4
NA
NA
NA
Report No.: RF131029E03H
Page No. 36 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.2.3 Test Procedures
a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being
connected to the power mains through a line impedance stabilization network (LISN). Other support
units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH
of coupling impedance for the measuring instrument.
b. Both lines of the power mains connected to the EUT were checked for maximum conducted
interference.
c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was
not recorded.
NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP)
and average detection (AV) at frequency 0.15MHz-30MHz.
4.2.4 Deviation from Test Standard
No deviation.
4.2.5 Test Setup
Note: 1.Support units were connected to second LISN.
Vertical Ground
Reference Plane
40cm
80cm
Test Receiver
Horizontal Ground
Reference Plane
EUT
LISN
For the actual test configuration, please refer to the attached file (Test Setup Photo).
4.2.6 EUT Operating Conditions
Same as 4.1.6.
Report No.: RF131029E03H
Page No. 37 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.2.7 Test Results
Phase
Line (L)
Detector Function
Quasi-Peak (QP) /
Average (AV)
No
Freq.
Corr.
Reading Value
Emission Level
Limit
Margin
Factor
[dB (uV)]
[dB (uV)]
[dB (uV)]
(dB)
[MHz]
(dB)
Q.P.
AV.
Q.P.
AV.
Q.P.
AV.
Q.P.
AV.
1
0.15000
10.19
39.58
23.60
49.77
33.79
66.00
56.00
-16.23
-22.21
2
0.17344
10.19
36.08
21.59
46.27
31.78
64.79
54.79
-18.52
-23.01
3
0.39609
10.22
18.73
11.33
28.95
21.55
57.93
47.93
-28.98
-26.38
4
5.81641
10.33
4.41
0.01
14.74
10.34
60.00
50.00
-45.26
-39.66
5
20.00000
11.38
14.19
13.72
25.57
25.10
60.00
50.00
-34.43
-24.90
6
27.99609
11.45
15.29
14.18
26.74
25.63
60.00
50.00
-33.26
-24.37
REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF131029E03H
Page No. 38 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
Phase
Neutral (N)
Detector Function
Quasi-Peak (QP) /
Average (AV)
No
Freq.
Corr.
Reading Value
Emission Level
Limit
Margin
Factor
[dB (uV)]
[dB (uV)]
[dB (uV)]
(dB)
[MHz]
(dB)
Q.P.
AV.
Q.P.
AV.
Q.P.
AV.
Q.P.
AV.
1
0.20078
10.16
31.02
15.81
41.18
25.97
63.58
53.58
-22.40
-27.61
2
0.38047
10.21
18.81
11.96
29.02
22.17
58.27
48.27
-29.25
-26.10
3
0.40000
10.21
20.45
12.55
30.66
22.76
57.85
47.85
-27.19
-25.09
4
0.69297
10.22
3.07
1.60
13.29
11.82
56.00
46.00
-42.71
-34.18
5
20.00000
11.10
14.66
14.05
25.76
25.15
60.00
50.00
-34.24
-24.85
6
28.00000
11.06
17.96
15.71
29.02
26.77
60.00
50.00
-30.98
-23.23
REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: RF131029E03H
Page No. 39 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.3 6dB Bandwidth Measurement
4.3.1 Limits of 6dB Bandwidth Measurement
The minimum of 6dB Bandwidth Measurement is 0.5 MHz.
4.3.2 Test Setup
4.3.3 Test Instruments
Refer to section 4.1.2 to get information of above instrument.
4.3.4 Test Procedure
a. Set resolution bandwidth (RBW) = 100kHz
b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak.
c. Trace mode = max hold.
d. Sweep = auto couple.
e. Measure the maximum width of the emission that is constrained by the frequencies associated with the
two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level
measured in the fundamental emission
4.3.5 Deviation fromTest Standard
No deviation.
4.3.6 EUT Operating Conditions
The software provided by client to enable the EUT under transmission condition continuously at lowest,
middle and highest channel frequencies individually.
Spectrum
Analyzer
EUT
Attenuator
Report No.: RF131029E03H
Page No. 40 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.3.7 Test Result
802.11b
Channel
Frequency (MHz)
6dB Bandwidth (MHz)
Minimum Limit
(MHz)
Pass / Fail
1
2412
10.11
0.5
PASS
6
2437
10.11
0.5
PASS
11
2462
10.12
0.5
PASS
802.11g
Channel
Frequency (MHz)
6dB Bandwidth (MHz)
Minimum Limit
(MHz)
Pass / Fail
1
2412
16.61
0.5
PASS
6
2437
16.62
0.5
PASS
11
2462
16.63
0.5
PASS
802.11n (HT20)
Channel
Frequency (MHz)
6dB Bandwidth (MHz)
Minimum Limit
(MHz)
Pass / Fail
1
2412
17.89
0.5
PASS
6
2437
17.88
0.5
PASS
11
2462
17.89
0.5
PASS
802.11n (HT40)
Channel
Frequency (MHz)
6dB Bandwidth (MHz)
Minimum Limit
(MHz)
Pass / Fail
3
2422
36.47
0.5
PASS
6
2437
36.55
0.5
PASS
9
2452
36.56
0.5
PASS
Report No.: RF131029E03H
Page No. 41 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
Spectrum Plot of Worst Value
802.11b / CH1
802.11g / CH1
802.11n (HT20) / CH6
802.11n (HT40) / CH3
Report No.: RF131029E03H
Page No. 42 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.4 Conducted Output Power Measurement
4.4.1 Limits of Conducted Output Power Measurement
For systems using digital modulation in the 24002483.5 MHz bands: 1 Watt (30dBm)
4.4.2 Test Setup
4.4.3 Test Instruments
DESCRIPTION &
MANUFACTURER
MODEL NO.
SERIAL NO.
CALIBRATED
DATE
CALIBRATED
UNTIL
Power meter
Anritsu
ML2495A
1014008
May 05, 2016
May 04, 2017
Power sensor
Anritsu
MA2411B
0917122
May 05, 2016
May 04, 2017
NOTE:
1. The test was performed in Oven room 2.
2. The calibration interval of the above test instruments is 12 months and the calibrations
are traceable to NML/ROC and NIST/USA.
3. Tested Date: Aug. 24, 2016
4.4.4 Test Procedures
A peak / average power sensor was used on the output port of the EUT. A power meter was used to read the
response of the peak / average power sensor. Record the power level.
4.4.5 Deviation from Test Standard
No deviation.
4.4.6 EUT Operating Conditions
Same as Item 4.3.6.
EUT
Power Sensor
Power Meter
Attenuator
Report No.: RF131029E03H
Page No. 43 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.4.7 Test Results
FOR PEAK POWER
802.11b
Chan.
Chan. Freq.
(MHz)
Peak Power
(mW)
Peak Power
(dBm)
Limit (dBm)
Pass / Fail
1
2412
87.297
19.41
30
Pass
6
2437
89.743
19.53
30
Pass
11
2462
88.92
19.49
30
Pass
802.11g
Chan.
Chan. Freq.
(MHz)
Peak Power
(mW)
Peak Power
(dBm)
Limit (dBm)
Pass / Fail
1
2412
151.356
21.80
30
Pass
6
2437
151.705
21.81
30
Pass
11
2462
148.594
21.72
30
Pass
802.11n (HT20)
Chan.
Chan. Freq.
(MHz)
Peak Power
(mW)
Peak Power
(dBm)
Limit (dBm)
Pass / Fail
1
2412
126.474
21.02
30
Pass
6
2437
128.825
21.10
30
Pass
11
2462
127.938
21.07
30
Pass
802.11n (HT40)
Chan.
Chan. Freq.
(MHz)
Peak Power
(mW)
Peak Power
(dBm)
Limit (dBm)
Pass / Fail
3
2422
130.317
21.15
30
Pass
6
2437
130.918
21.17
30
Pass
9
2452
128.825
21.10
30
Pass
Report No.: RF131029E03H
Page No. 44 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
FOR AVERAGE POWER
802.11b
Chan.
Chan. Freq.
(MHz)
Average Power
(mW)
Average Power
(dBm)
1
2412
56.624
17.53
6
2437
58.076
17.64
11
2462
57.016
17.56
802.11g
Chan.
Chan. Freq.
(MHz)
Average Power
(mW)
Average Power
(dBm)
1
2412
45.29
16.56
6
2437
45.394
16.57
11
2462
43.954
16.43
802.11n (HT20)
Chan.
Chan. Freq.
(MHz)
Average Power
(mW)
Average Power
(dBm)
1
2412
33.884
15.30
6
2437
34.834
15.42
11
2462
34.674
15.40
802.11n (HT40)
Chan.
Chan. Freq.
(MHz)
Average Power
(mW)
Average Power
(dBm)
3
2422
34.356
15.36
6
2437
34.674
15.40
9
2452
34.119
15.33
Report No.: RF131029E03H
Page No. 45 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.5 Power Spectral Density Measurement
4.5.1 Limits of Power Spectral Density Measurement
The Maximum of Power Spectral Density Measurement is 8dBm.
4.5.2 Test Setup
4.5.3 Test Instruments
DESCRIPTION &
MANUFACTURER
MODEL NO.
SERIAL NO.
CALIBRATED
DATE
CALIBRATED
UNTIL
Spectrum Analyzer
R&S
FSP40
100060
May 11, 2016
May 10, 2017
NOTE:
1. The test was performed in Oven room 2.
2. The calibration interval of the above test instruments is 12 months and the calibrations
are traceable to NML/ROC and NIST/USA.
3. Tested Date: Aug. 24, 2016
4.5.4 Test Procedure
a. Set analyzer center frequency to DTS channel center frequency.
b. Set the span to 1.5 times the DTS bandwidth.
c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz.
d. Set the VBW ≥ 3 × RBW.
e. Detector = peak.
f. Sweep time = auto couple.
g. Trace mode = max hold.
h. Allow trace to fully stabilize.
i. Use the peak marker function to determine the maximum amplitude level within the RBW.
4.5.5 Deviation from Test Standard
No deviation.
4.5.6 EUT Operating Condition
Same as Item 4.3.6
Spectrum
Analyzer
EUT
Attenuator
Report No.: RF131029E03H
Page No. 46 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.5.7 Test Results
802.11b
Channel
Frequency
(MHz)
PSD
(dBm/3kHz)
Limit
(dBm/3kHz)
Pass
/Fail
1
2412
-12.60
8
Pass
6
2437
-14.79
8
Pass
11
2462
-14.95
8
Pass
802.11g
Channel
Frequency
(MHz)
PSD
(dBm/3kHz)
Limit
(dBm/3kHz)
Pass
/Fail
1
2412
-13.25
8
Pass
6
2437
-12.05
8
Pass
11
2462
-12.67
8
Pass
802.11n (HT20)
Channel
Frequency
(MHz)
PSD
(dBm/3kHz)
Limit
(dBm/3kHz)
Pass
/Fail
1
2412
-13.44
8
Pass
6
2437
-13.79
8
Pass
11
2462
-13.80
8
Pass
802.11n (HT40)
Channel
Frequency
(MHz)
PSD
(dBm/3kHz)
Limit
(dBm/3kHz)
Pass
/Fail
3
2422
-15.94
8
Pass
6
2437
-13.81
8
Pass
9
2452
-14.76
8
Pass
Report No.: RF131029E03H
Page No. 47 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
Spectrum Plot of Worst Value
802.11b / CH1
802.11g / CH6
802.11n (HT20) / CH1
802.11n (HT40) / CH6
Report No.: RF131029E03H
Page No. 48 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.6 Conducted Out of Band Emission Measurement
4.6.1 Limits of Conducted Out of Band Emission Measurement
Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth).
4.6.2 Test Setup
4.6.3 Test Instruments
DESCRIPTION &
MANUFACTURER
MODEL NO.
SERIAL NO.
CALIBRATED
DATE
CALIBRATED
UNTIL
Spectrum Analyzer
R&S
FSP40
100060
May 11, 2016
May 10, 2017
NOTE:
1. The test was performed in Oven room 2.
2. The calibration interval of the above test instruments is 12 months and the calibrations
are traceable to NML/ROC and NIST/USA.
3. Tested Date: Aug. 24, 2016
4.6.4 Test Procedure
MEASUREMENT PROCEDURE REF
1. Set the RBW = 100 kHz.
2. Set the VBW ≥ 300 kHz.
3. Detector = peak.
4. Sweep time = auto couple.
5. Trace mode = max hold.
6. Allow trace to fully stabilize.
7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within
the fundamental EBW.
MEASUREMENT PROCEDURE OOBE
1. Set RBW = 100 kHz.
2. Set VBW ≥ 300 kHz.
3. Detector = peak.
4. Sweep = auto couple.
5. Trace Mode = max hold.
6. Allow trace to fully stabilize.
7. Use the peak marker function to determine the maximum amplitude level.
4.6.5 Deviation from Test Standard
No deviation.
Spectrum
Analyzer
EUT
Attenuator
Report No.: RF131029E03H
Page No. 49 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
4.6.6 EUT Operating Condition
Same as Item 4.3.6
4.6.7 Test Results
The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line
indicates the 20dB offset below D1. It shows compliance with the requirement.
Report No.: RF131029E03H
Page No. 50 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
802.11b
CH 1
CH 6
CH 11
CH 1 Band edge
CH 11 Band edge
Report No.: RF131029E03H
Page No. 51 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
802.11g
CH 1
CH 6
CH 11
CH 1 Band edge
CH 11 Band edge
Report No.: RF131029E03H
Page No. 52 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
802.11n (HT20)
CH 1
CH 6
CH 11
CH 1 Band edge
CH 11 Band edge
Report No.: RF131029E03H
Page No. 53 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
802.11n (HT40)
CH 3
CH 6
CH 9
CH 3 Band edge
CH 9 Band edge
Report No.: RF131029E03H
Page No. 54 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
5 Pictures of Test Arrangements
Please refer to the attached file (Test Setup Photo).
Report No.: RF131029E03H
Page No. 55 / 55
Report Format Version: 6.1.1
Reference No.: 161109E05
Appendix Information on the Testing Laboratories
We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to
provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and
approved according to ISO/IEC 17025.
If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab
Tel: 886-2-26052180
Fax: 886-2-26051924
Hsin Chu EMC/RF/Telecom Lab
Tel: 886-3-6668565
Fax: 886-3-6668323
Hwa Ya EMC/RF/Safety Lab
Tel: 886-3-3183232
Fax: 886-3-3270892
Email: service.adt@tw.bureauveritas.com
Web Site: www.bureauveritas-adt.com
The address and road map of all our labs can be found in our web site also.
--- END ---
Download: Terminal Test Report 1 XAC Automation Corporation

Document ID3253452
Application Id9w7iRki9lBdqj5foBywiQQ==
Document DescriptionTest Report (WLAN) rev 2.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize1281035
Date Submitted2017-01-10 00:00:00
Date Available2017-01-11 00:00:00
Creation Date2017-01-05 10:26:11
Producing SoftwareMicrosoft Office Word 2007
Document Lastmod2017-01-05 10:28:02
Document Title1
Document CreatorMicrosoft Office Word 2007
Document Author: Jim

Facebook Twitter Google+ RSS © FCCID.io 2017