Teplo RF Exposure Info - RF Exporure Load&Road;, Inc.
Load&Road;, Inc. Teplo
See More Details For FCC ID: 2AKAS-T001
Purchase on Amazon: Teplo
|Document Description||RF Exposure Report|
|Document Type||RF Exposure Info|
|Document Title||Microsoft Word - RF Exporure.doc|
DocumentTrouble Loading? Try Downloading this document. Zoom In and Out With ⌘ / Ctrl key and plus [+] or minus [-]
FCC ID: 2AKAS-T001
According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this
section shall be operated in a manner that ensures that the public is not exposed to radio
frequency energy level in excess of the Commission’s guidelines.
According to KDB447498 D01 General RF Exposure Guidance V06
For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test
exclusion thresholds are determined by the following:
[(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] •
[√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where
• f(GHz) is the RF channel transmit frequency in GHz
• Power and distance are rounded to the nearest mW and mm before calculation
• The result is rounded to one decimal place for comparison
• The values 3.0 and 7.5 are referred to as numeric thresholds in step b)
The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm,
and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation
distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test
Maximum measured transmitter power:
calculation 1-g SAR
2.402 -1.505 -1±1 0 0.3098 3.00
-1±1 0 0.3124 3.00
-1±1 0 0.3150 3.00
For the max result 0.3150≤ 3.0 for 1-g SAR extremity SAR, No SAR is required.
Company Name: EMTEK (Shenzhen) CO., LTD.
Address: Bldg 69, Majialong Industry Zone, NanshanDistrict, Shenzhen, China.
David Lee/ Manager