FCC ID 2AC7Z-ESP8266EX

2AC7ZESP8266EX, 2AC7Z ESP8266EX, 2AC7Z-ESP8266EX

ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD Wi-Fi Internet of Things Module

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AC7Z-ESP8266EX is . The remaining characters of the FCC ID, -ESP8266EX, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Application: Wi-Fi Internet of Things Module
Equipment Class: DTS - Digital Transmission System

ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD

Full Company Details: ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD - 2AC7Z
Company Code: 2AC7Z
Address:
   ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD
   456 Bibo Road Room A201
   Shanghai, N/A 201203
   China

App #	Purpose	Date	Unique ID
1	Original Equipment	2014-11-05	cFkRAvn8GCnqMqpEQSeOxg==

Approved Operating Frequencies

Line Entry	Frequency Range	Power Output	Rule Parts
1	2412.00000000-2462.00000000	0.2660000	15C

Exhibits

All Available Documents

Document	Type	Submitted / Available
Confidentiality Letter	Cover Letter(s) / Adobe Acrobat PDF (38 kB)	2014-11-05 / 2014-11-05
Confidentiality Letter	Cover Letter(s) / Adobe Acrobat PDF (38 kB)	2014-11-05 / 2014-11-05
Test Report	Test Report / Adobe Acrobat PDF (3551 kB)	2014-11-05 / 2014-11-05
Parts List	Parts List/Tune Up Info / Adobe Acrobat PDF (34 kB)	2014-11-05 /
RF Exposure	RF Exposure Info / Adobe Acrobat PDF (135 kB)	2014-11-05 / 2014-11-05
External Photos	External Photos / Adobe Acrobat PDF (535 kB)	2014-11-05 / 2014-11-05
Internal Photos	Internal Photos / Adobe Acrobat PDF (535 kB)	2014-11-05 / 2014-11-05
Test Setup Photos	Test Setup Photos / Adobe Acrobat PDF (278 kB)	2014-11-05 / 2014-11-05
RF Exposure	RF Exposure Info / Adobe Acrobat PDF (135 kB)	2014-11-05 / 2014-11-05
Test Setup Photos	Test Setup Photos / Adobe Acrobat PDF (278 kB)	2014-11-05 / 2014-11-05
Label Location	ID Label/Location Info / Adobe Acrobat PDF (112 kB)	2014-11-05 / 2014-11-05
Internal Photos	Internal Photos / Adobe Acrobat PDF (535 kB)	2014-11-05 / 2014-11-05
Tune Up	Parts List/Tune Up Info / Adobe Acrobat PDF (40 kB)	2014-11-05 /
Schematics	Schematics / Adobe Acrobat PDF (45 kB)	2014-11-05 /
User Manual	Users Manual / Adobe Acrobat PDF (525 kB)	2014-11-05 / 2014-11-05
Modular Approval Letter	Cover Letter(s) / Adobe Acrobat PDF (58 kB)	2014-11-05 / 2014-11-05
Label Location	ID Label/Location Info / Adobe Acrobat PDF (112 kB)	2014-11-05 / 2014-11-05
Antenna Operational Description	Operational Description / Adobe Acrobat PDF (665 kB)	2014-11-05 / 2014-11-05
User Manual	Users Manual / Adobe Acrobat PDF (525 kB)	2014-11-05 / 2014-11-05
Schematics PCB 2	Schematics / Adobe Acrobat PDF (877 kB)	2014-11-05 / 2014-11-05
Antenna Operational Description	Operational Description / Adobe Acrobat PDF (665 kB)	2014-11-05 / 2014-11-05
Schematics PCB 2	Schematics / Adobe Acrobat PDF (877 kB)	2014-11-05 / 2014-11-05
Modular Approval Letter	Cover Letter(s) / Adobe Acrobat PDF (58 kB)	2014-11-05 / 2014-11-05
Block Diagram	Block Diagram / Adobe Acrobat PDF (33 kB)	2014-11-05 /
External Photos	External Photos / Adobe Acrobat PDF (535 kB)	2014-11-05 / 2014-11-05
Schematics WiFi Flash Module	Schematics / Adobe Acrobat PDF (72 kB)	2014-11-05 / 2014-11-05
Schematics WiFi Flash Module	Schematics / Adobe Acrobat PDF (72 kB)	2014-11-05 / 2014-11-05
Operational Description	Operational Description / Adobe Acrobat PDF (1926 kB)	2014-11-05 /
Test Report	Test Report / Adobe Acrobat PDF (3551 kB)	2014-11-05 / 2014-11-05

APP # 1 (2014-11-05) Documents

Confidentiality Letter
2014-11-05 / 2014-11-05 Cover Letter(s) / Adobe Acrobat PDF (38 kB)
Confidentiality Letter
2014-11-05 / 2014-11-05 Cover Letter(s) / Adobe Acrobat PDF (38 kB)
Test Report
2014-11-05 / 2014-11-05 Test Report / Adobe Acrobat PDF (3551 kB)
Parts List
2014-11-05 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (34 kB)
RF Exposure
2014-11-05 / 2014-11-05 RF Exposure Info / Adobe Acrobat PDF (135 kB)
External Photos
2014-11-05 / 2014-11-05 External Photos / Adobe Acrobat PDF (535 kB)
Internal Photos
2014-11-05 / 2014-11-05 Internal Photos / Adobe Acrobat PDF (535 kB)
Test Setup Photos
2014-11-05 / 2014-11-05 Test Setup Photos / Adobe Acrobat PDF (278 kB)
RF Exposure
2014-11-05 / 2014-11-05 RF Exposure Info / Adobe Acrobat PDF (135 kB)
Test Setup Photos
2014-11-05 / 2014-11-05 Test Setup Photos / Adobe Acrobat PDF (278 kB)
Label Location
2014-11-05 / 2014-11-05 ID Label/Location Info / Adobe Acrobat PDF (112 kB)
Internal Photos
2014-11-05 / 2014-11-05 Internal Photos / Adobe Acrobat PDF (535 kB)
Tune Up
2014-11-05 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (40 kB)
Schematics
2014-11-05 / N/A Schematics / Adobe Acrobat PDF (45 kB)
User Manual
2014-11-05 / 2014-11-05 Users Manual / Adobe Acrobat PDF (525 kB)
Modular Approval Letter
2014-11-05 / 2014-11-05 Cover Letter(s) / Adobe Acrobat PDF (58 kB)
Label Location
2014-11-05 / 2014-11-05 ID Label/Location Info / Adobe Acrobat PDF (112 kB)
Antenna Operational Description
2014-11-05 / 2014-11-05 Operational Description / Adobe Acrobat PDF (665 kB)
User Manual
2014-11-05 / 2014-11-05 Users Manual / Adobe Acrobat PDF (525 kB)
Schematics PCB 2
2014-11-05 / 2014-11-05 Schematics / Adobe Acrobat PDF (877 kB)
Antenna Operational Description
2014-11-05 / 2014-11-05 Operational Description / Adobe Acrobat PDF (665 kB)
Schematics PCB 2
2014-11-05 / 2014-11-05 Schematics / Adobe Acrobat PDF (877 kB)
Modular Approval Letter
2014-11-05 / 2014-11-05 Cover Letter(s) / Adobe Acrobat PDF (58 kB)
Block Diagram
2014-11-05 / N/A Block Diagram / Adobe Acrobat PDF (33 kB)
External Photos
2014-11-05 / 2014-11-05 External Photos / Adobe Acrobat PDF (535 kB)
Schematics WiFi Flash Module
2014-11-05 / 2014-11-05 Schematics / Adobe Acrobat PDF (72 kB)
Schematics WiFi Flash Module
2014-11-05 / 2014-11-05 Schematics / Adobe Acrobat PDF (72 kB)
Operational Description
2014-11-05 / N/A Operational Description / Adobe Acrobat PDF (1926 kB)
Test Report
2014-11-05 / 2014-11-05 Test Report / Adobe Acrobat PDF (3551 kB)

Grants

TCB Grant from App #1 (2014-11-05)

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 11/05/2014

Application Dated: 11/05/2014

ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD

456 Bibo Road Room A201

Shanghai, 201203
China

Attention: Minjie Cai

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AC7Z-ESP8266EX

Name of Grantee:	ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD

Equipment Class:	Digital Transmission System
Notes:	Wi-Fi Internet of Things Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.266

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant from App #1 (2014-11-05)

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD
456 Bibo Road Room A201
Shanghai, 201203
China

Date of Grant: 11/05/2014

Application Dated: 11/05/2014

Attention: Minjie Cai

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AC7Z-ESP8266EX

Name of Grantee:	ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD

Equipment Class:	Digital Transmission System
Notes:	Wi-Fi Internet of Things Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.266

Mail To:

EA794971

Applications for this FCC ID

Form App # 1 (2014-11-05)

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD
FCC Registration Number (FRN):	0023938848
Alphanumeric FCC ID:	2AC7ZESP8266EX
Unique Application Identifier:	cFkRAvn8GCnqMqpEQSeOxg==
Line one:	456 Bibo Road Room A201
City:	Shanghai
State:	N/A
Country:	China
Zip Code:	201203

TCB Information

TCB Application Email Address:	TEI@TIMCOENGR.COM
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	2AC7Z
Product Code:	-ESP8266EX

Person at the applicant's address to receive grant or for contact

Name:

Minjie Cai

Telephone Number:

(8621)61062057

Extension:

Fax Number:	(8621)61062057
Email:	caiminjie@espressif.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Wi-Fi Internet of Things Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: TA Technology (Shanghai) Co., Ltd.

First Name: Zhihui

Last Name: Liu

Telephone Number:

86-21-50791141

Extension:

8026

Fax Number: 86-21-50791141

E-mail: liuzhihui@ta-shanghai.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Minjie Cai

Title of authorized signature: Marketing Manager