FCC ID 2AFTLSS1

2AFTL-SS1, 2AFTL SS1, 2AFTLSS1, 2AFTLSSI

ecoVent Corp. Digital Transmission System

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AFTLSS1 is . The remaining characters of the FCC ID, SS1, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

ecoVent Corp.

Full Company Details: ecoVent Corp. - 2AFTL
Company Code: 2AFTL
Address:
   ecoVent Corp.
   24 Cambridge St Suite 6
   Charlestown, MA 02129
   United States
App # Purpose Date Unique ID
1 Original Equipment 2015-11-13 /LjAFHSG3eehJG0PfViHJA==
2 Class II Permissive Change 2015-12-15 8H+4mZKvvSTbRFY9k3DYSQ==

Approved Operating Frequencies

App # Frequency RangePower OutputRule PartsGrant Notes
1.1915-9150.003090315C19, 2
1.22402-24800.000007915C19, 2
2.1904.00000000-926.000000000.002999215C19, 20

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 Test Report 2 - (Wall Sensor 2400 MHz) (FCC Only) (updated Nov 10, 2015).pdfTest Report / Adobe Acrobat PDF (744 kB) 2015-11-13 / 2015-11-13
1 External photo 2 - Modification Photo (Wall Sensor).pdfExternal Photos / Adobe Acrobat PDF (211 kB) 2015-11-13 / 2016-05-11
1 Test Set Up Photo - Wall Sensor.pdfTest Setup Photos / Adobe Acrobat PDF (604 kB) 2015-11-13 / 2016-05-11
1 External photos 1 - Wall Sensor.pdfExternal Photos / Adobe Acrobat PDF (1099 kB) 2015-11-13 / 2016-05-11
1 Ecovent Manual (Draft only).pdfUsers Manual / Adobe Acrobat PDF (4197 kB) 2015-11-13 / 2016-05-11
1 ecoVent Labels Dimension Location and Material.pdfID Label/Location Info / Adobe Acrobat PDF (298 kB) 2015-11-13 / 2015-11-13
1 RF exposure_MPE prediction calculation - EP2231-1 - Wall Sensor (915 MHz) combinRF Exposure Info / Adobe Acrobat PDF (177 kB) 2015-11-13 / 2015-11-13
1 Internal Photo (Wall Sensor) - updated.pdfInternal Photos / Adobe Acrobat PDF (846 kB) 2015-11-13 / 2016-05-11
1 Request for Confidentiality for FCC.pdfCover Letter(s) / Adobe Acrobat PDF (509 kB) 2015-11-13 / 2015-11-13
1 Test Report 1 - (Wall Sensor - 915 MHz) (FCC only) - Updated Nov 10.pdfTest Report / Adobe Acrobat PDF (669 kB) 2015-11-13 / 2015-11-13
1 Cover Letter of Agency for FCC.pdfCover Letter(s) / Adobe Acrobat PDF (483 kB) 2015-11-13 / 2015-11-13
2 Request for Confidentiality.pdfCover Letter(s) / Adobe Acrobat PDF (505 kB) 2015-12-15 / 2015-12-15
2 Test Report.pdfTest Report / Adobe Acrobat PDF (635 kB) 2015-12-15 / 2015-12-15
2 Test Set up photo.pdfTest Setup Photos / Adobe Acrobat PDF (527 kB) 2015-12-15 / 2016-06-12
2 Cover letter_C2PC Application Cover Letter.pdfCover Letter(s) / Adobe Acrobat PDF (25 kB) 2015-12-15 / 2015-12-15

APP # 1 (2015-11-13) Documents

External photos 1 - Wall Sensor.pdf
 2015-11-13 / 2016-05-11 External Photos / Adobe Acrobat PDF (1099 kB)
Test Report 2 - (Wall Sensor 2400 MHz) (FCC Only) (updated Nov 10, 2015).pdf
 2015-11-13 / 2015-11-13 Test Report / Adobe Acrobat PDF (744 kB)
Block Diagram - Wall Sensor.pdf
 2015-11-13 / N/A Block Diagram / Adobe Acrobat PDF (162 kB)
External photo 2 - Modification Photo (Wall Sensor).pdf
 2015-11-13 / 2016-05-11 External Photos / Adobe Acrobat PDF (211 kB)
RF exposure_MPE prediction calculation - EP2231-1 - Wall Sensor (915 MHz) combin
 2015-11-13 / 2015-11-13 RF Exposure Info / Adobe Acrobat PDF (177 kB)
Internal Photo (Wall Sensor) - updated.pdf
 2015-11-13 / 2016-05-11 Internal Photos / Adobe Acrobat PDF (846 kB)
Test Set Up Photo - Wall Sensor.pdf
 2015-11-13 / 2016-05-11 Test Setup Photos / Adobe Acrobat PDF (604 kB)
Cover Letter of Agency for FCC.pdf
 2015-11-13 / 2015-11-13 Cover Letter(s) / Adobe Acrobat PDF (483 kB)
External photos 1 - Wall Sensor.pdf
 2015-11-13 / 2016-05-11 External Photos / Adobe Acrobat PDF (1099 kB)
Test Report 1 - (Wall Sensor - 915 MHz) (FCC only) - Updated Nov 10.pdf
 2015-11-13 / 2015-11-13 Test Report / Adobe Acrobat PDF (669 kB)
Operational Description 1 - Wall Sensor - Technical.pdf
 2015-11-13 / N/A Operational Description / Adobe Acrobat PDF (315 kB)
Ecovent Manual (Draft only).pdf
 2015-11-13 / 2016-05-11 Users Manual / Adobe Acrobat PDF (4197 kB)
ecoVent Labels Dimension Location and Material.pdf
 2015-11-13 / 2015-11-13 ID Label/Location Info / Adobe Acrobat PDF (298 kB)
ecoVent Labels Dimension Location and Material.pdf
 2015-11-13 / 2015-11-13 ID Label/Location Info / Adobe Acrobat PDF (298 kB)
Test Report 2 - (Wall Sensor 2400 MHz) (FCC Only) (updated Nov 10, 2015).pdf
 2015-11-13 / 2015-11-13 Test Report / Adobe Acrobat PDF (744 kB)
Operational description 2 - Antenna Spec for Wall Sensor (915MHz).pdf
 2015-11-13 / N/A Operational Description / Adobe Acrobat PDF (241 kB)
RF exposure_MPE prediction calculation - EP2231-1 - Wall Sensor (915 MHz) combin
 2015-11-13 / 2015-11-13 RF Exposure Info / Adobe Acrobat PDF (177 kB)
Internal Photo (Wall Sensor) - updated.pdf
 2015-11-13 / 2016-05-11 Internal Photos / Adobe Acrobat PDF (846 kB)
Ecovent Manual (Draft only).pdf
 2015-11-13 / 2016-05-11 Users Manual / Adobe Acrobat PDF (4197 kB)
Test Set Up Photo - Wall Sensor.pdf
 2015-11-13 / 2016-05-11 Test Setup Photos / Adobe Acrobat PDF (604 kB)
Operational description 3 - 2.4GHz antenna spec.pdf
 2015-11-13 / N/A Operational Description / Adobe Acrobat PDF (1904 kB)
Request for Confidentiality for FCC.pdf
 2015-11-13 / 2015-11-13 Cover Letter(s) / Adobe Acrobat PDF (509 kB)
Test Report 1 - (Wall Sensor - 915 MHz) (FCC only) - Updated Nov 10.pdf
 2015-11-13 / 2015-11-13 Test Report / Adobe Acrobat PDF (669 kB)
External photo 2 - Modification Photo (Wall Sensor).pdf
 2015-11-13 / 2016-05-11 External Photos / Adobe Acrobat PDF (211 kB)
Wall Sensor Schematics.pdf
 2015-11-13 / N/A Schematics / Adobe Acrobat PDF (199 kB)
Request for Confidentiality for FCC.pdf
 2015-11-13 / 2015-11-13 Cover Letter(s) / Adobe Acrobat PDF (509 kB)
Cover Letter of Agency for FCC.pdf
 2015-11-13 / 2015-11-13 Cover Letter(s) / Adobe Acrobat PDF (483 kB)

APP # 2 (2015-12-15) Documents

Request for Confidentiality.pdf
 2015-12-15 / 2015-12-15 Cover Letter(s) / Adobe Acrobat PDF (505 kB)
Cover letter_C2PC Application Cover Letter.pdf
 2015-12-15 / 2015-12-15 Cover Letter(s) / Adobe Acrobat PDF (25 kB)
Test Report.pdf
 2015-12-15 / 2015-12-15 Test Report / Adobe Acrobat PDF (635 kB)
Request for Confidentiality.pdf
 2015-12-15 / 2015-12-15 Cover Letter(s) / Adobe Acrobat PDF (505 kB)
Test Set up photo.pdf
 2015-12-15 / 2016-06-12 Test Setup Photos / Adobe Acrobat PDF (527 kB)
Test Report.pdf
 2015-12-15 / 2015-12-15 Test Report / Adobe Acrobat PDF (635 kB)
Test Set up photo.pdf
 2015-12-15 / 2016-06-12 Test Setup Photos / Adobe Acrobat PDF (527 kB)
Cover letter_C2PC Application Cover Letter.pdf
 2015-12-15 / 2015-12-15 Cover Letter(s) / Adobe Acrobat PDF (25 kB)

Grants

TCB Grant from App #1 (2015-11-13)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
 Date of Grant: 11/13/2015

Application Dated: 11/13/2015
ecoVent Corp.
24 Cambridge St
Suite 6
Charlestown, MA 02129
 
Attention: Robert Kim , Director of Electrical Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFTLSS1
Name of Grantee:  ecoVent Corp.
Equipment Class: Digital Transmission System
Notes: Digital Transmission System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
19 20 15C 915.0  -  915.0 0.0030903  
19 20 15C 2402.0  -  2480.0 0.0000079  

Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant from App #1 (2015-11-13)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ecoVent Corp.
24 Cambridge St Suite 6
Charlestown, MA 02129
United States 		  Date of Grant: 11/13/2015

Application Dated: 11/13/2015
 
Attention: Robert Kim , Director of Electrical Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFTLSS1
Name of Grantee:  ecoVent Corp.
Equipment Class: Digital Transmission System
Notes: Digital Transmission System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
19 20 15C 915.0  -  915.0 0.0030903  
19 20 15C 2402.0  -  2480.0 0.0000079  

Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To:


EA643918

TCB Grant from App #2 (2015-12-15)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
 Date of Grant: 12/15/2015

Application Dated: 12/15/2015
ecoVent Corp.
24 Cambridge St
Suite 6
Charlestown, MA 02129
 
Attention: Robert Kim , Director of Electrical Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFTLSS1
Name of Grantee:  ecoVent Corp.
Equipment Class: Digital Transmission System
Notes: Digital Transmission System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
19 20 15C 904.0  -  926.0 0.0029992  

Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing.

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant from App #2 (2015-12-15)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ecoVent Corp.
24 Cambridge St Suite 6
Charlestown, MA 02129
United States 		  Date of Grant: 12/15/2015

Application Dated: 12/15/2015
 
Attention: Robert Kim , Director of Electrical Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AFTLSS1
Name of Grantee:  ecoVent Corp.
Equipment Class: Digital Transmission System
Notes: Digital Transmission System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
19 20 15C 904.0  -  926.0 0.0029992  

Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing.


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To:


EA525695

Applications for this FCC ID

Form App # 1 (2015-11-13)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: ecoVent Corp.
FCC Registration Number (FRN): 0024870743
Alphanumeric FCC ID: 2AFTLSS1
Unique Application Identifier: /LjAFHSG3eehJG0PfViHJA==
Line one: 24 Cambridge St
Line two: Suite 6
City: Charlestown
State: Massachusetts
Country: United States
Zip Code: 02129

TCB Information
TCB Application Email Address: certification@curtis-straus.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AFTL
Product Code: SS1

Person at the applicant's address to receive grant or for contact
Name: Robert Kim
Title: Director of Electrical Engineering
Telephone Number: 8572044466 Extension:
Fax Number: 8572044466
Email: rob@ecoventsystems.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   05/11/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Digital Transmission System

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Curtis-Straus LLC, a wholly owned subsidiary of Bu
First Name:   Tadas
Last Name:   Stukas
Telephone Number: 9784868880 Extension: 6154
Fax Number:  9784868828
E-mail:  tadas.stukas@us.bureauveritas.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Christopher Reynolds
Title of authorized signature:  EMC Supervisor

Complete items below if agent signs the application:

Firm Name:  Curtis Straus LLC (A Bureau Veritas Company)
Name:  Christopher Christopher Christopher
Line 1:  Christopher
Line 2:  Christopher
P.O. Box:  Christopher
City:  Christopher
State:  Christopher
Country:  Christopher
Zip Code:  Christopher
Telephone Number:  9784868880
Fax Number:  9784868828
E-mail:  christopher.reynolds@us.bureauveritas.com

Form App # 2 (2015-12-15)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: ecoVent Corp.
FCC Registration Number (FRN): 0024870743
Alphanumeric FCC ID: 2AFTLSS1
Unique Application Identifier: 8H+4mZKvvSTbRFY9k3DYSQ==
Line one: 24 Cambridge St
Line two: Suite 6
City: Charlestown
State: Massachusetts
Country: United States
Zip Code: 02129

TCB Information
TCB Application Email Address: certification@curtis-straus.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AFTL
Product Code: SS1

Person at the applicant's address to receive grant or for contact
Name: Robert Kim
Title: Director of Electrical Engineering
Telephone Number: 8572044466 Extension:
Fax Number: 8572044466
Email: rob@ecoventsystems.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   06/12/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Digital Transmission System

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Curtis-Straus LLC, a wholly owned subsidiary of Bu
First Name:   Tadas
Last Name:   Stukas
Telephone Number: 9784868880 Extension: 6154
Fax Number:  9784868828
E-mail:  tadas.stukas@us.bureauveritas.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Christopher Reynolds
Title of authorized signature: 

Complete items below if agent signs the application:

Firm Name:  Curtis-Straus LLC
Name:  Christopher Christopher Christopher
Line 1:  Christopher
Line 2:  Christopher
P.O. Box:  Christopher
City:  Christopher
State:  Christopher
Country:  Christopher
Zip Code:  Christopher

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

© FCCID.io 2025