FCC ID AK8M16DFL1

AK8-M16DFL1, AK8 M16DFL1, AK8M16DFL1, AK8MI6DFLI

Sony Corporation Wireless communication module

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: AK8M16DFL1 is . The remaining characters of the FCC ID, M16DFL1, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Sony Corporation

Full Company Details: Sony Corporation - AK8
Company Code: AK8
Address:
   Sony Corporation
   1-7-1 Konan Minato-ku
   Tokyo, N/A 108-0075
   Japan
App # Purpose Date Unique ID
1 Class II Permissive Change 2017-04-20 3+7uK1nZoMlsWVJklCNnRQ==
2 Class II Permissive Change 2016-08-03 95bmAU+r2IdRI66sltmYqw==
3 Original Equipment 2016-06-22 e/CdAbtfvKE1qu7fxyhTVQ==
4 Class II Permissive Change 2017-04-20 EL4Dj+er3GzaRQpWgtvp3g==
5 Class II Permissive Change 2016-08-03 ExXTug2i8HNP0idZlUe/Uw==
6 Original Equipment 2016-06-22 kqkQfN9wr1hlQsxRDa52rg==
7 Class II Permissive Change 2016-08-03 KtnCqvbN+iajAOavRRCDhQ==
8 Original Equipment 2016-06-22 NWLJY+8HVa5vDiGgJ/N8uA==
9 Class II Permissive Change 2017-04-20 RDfSktjU6GOxx+GmwVOweg==

Approved Operating Frequencies

App # Frequency RangePower OutputRule PartsGrant Notes
1.12402.00000000-2480.000000000.003500015CCC
2.12412-24620.196615CCC, MO
2.22402-24800.001715CCC, MO
3.12402.00000000-2480.000000000.003500015CCC
4.15180-53200.015515E38, CC, MO
4.25500-57000.015315E38, CC, MO
4.35745-58250.014515E38, CC, MO
5.12402.00000000-2480.000000000.003500015CCC
6.12412-24620.196615CCC, MO
6.22402-24800.001715CCC
7.15180-53200.015515E38, CC, MO
7.25500-57000.015315E38, CC, MO
7.35745-58250.014515E38, CC, MO
8.15180-53200.015515E38, CC, MO
8.25500-57000.015315E38, CC, MO
8.35745-58250.014515E38, CC, MO
9.12412-24620.196615CCC, MO
9.22402-24800.001715CCC

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 Authorization Letter-simple formatCover Letter(s) / Adobe Acrobat PDF (365 kB) 2017-04-19 / 2017-04-20
1 Class II Permissive Change LetterCover Letter(s) / Adobe Acrobat PDF (394 kB) 2017-04-19 / 2017-04-20
1 Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (321 kB) 2017-04-19 / 2017-04-20
1 (Short term confidential) FCC Test Setup Photo_DSSTest Setup Photos / Adobe Acrobat PDF (637 kB) 2017-04-19 / 2017-10-18
1 Request for Short-term Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (325 kB) 2017-04-19 / 2017-04-20
1 Test Report_DSSTest Report / Adobe Acrobat PDF (354 kB) 2017-04-19 / 2017-04-20
1 Special Power of AttorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2017-04-19 / 2017-04-20
1 (Short-Term Confidential) External PhotoExternal Photos / Adobe Acrobat PDF (182 kB) 2017-04-19 / 2017-10-18
2 Confidentiality letter(long)Cover Letter(s) / Adobe Acrobat PDF (321 kB) 2016-08-03 / 2016-08-03
2 Test setup photos1Test Setup Photos / Adobe Acrobat PDF (1106 kB) 2016-08-03 / 2017-01-30
2 Confidentiality letter(short)Cover Letter(s) / Adobe Acrobat PDF (329 kB) 2016-08-03 / 2016-08-03
2 Test setup photos2Test Setup Photos / Adobe Acrobat PDF (1163 kB) 2016-08-03 / 2017-01-30
2 power of attorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2016-08-03 / 2016-08-03
2 External photos1External Photos / Adobe Acrobat PDF (140 kB) 2016-08-03 / 2017-01-30
2 RF EXRF Exposure Info / Adobe Acrobat PDF (28 kB) 2016-08-03 / 2016-08-03
2 Authorization letterCover Letter(s) / Adobe Acrobat PDF (361 kB) 2016-08-03 / 2016-08-03
2 External photos2External Photos / Adobe Acrobat PDF (154 kB) 2016-08-03 / 2017-01-30
2 Test report(DTS1)Test Report / Adobe Acrobat PDF (433 kB) 2016-08-03 / 2016-08-03
2 C2PC letterCover Letter(s) / Adobe Acrobat PDF (387 kB) 2016-08-03 / 2016-08-03
2 Test report(DTS2)Test Report / Adobe Acrobat PDF (403 kB) 2016-08-03 / 2016-08-03
3 (Short term confidential) FCC Test Setup Photo_DSS_R1Test Setup Photos / Adobe Acrobat PDF (1253 kB) 2016-06-15 / 2016-12-19
3 FCC Request for Short-term Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (327 kB) 2016-06-15 / 2016-06-22
3 (Short-Term Confidential) External PhotoExternal Photos / Adobe Acrobat PDF (110 kB) 2016-06-15 / 2016-12-19
3 FCC Special Power of AttorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2016-06-15 / 2016-06-22
3 (Short-Term Confidential) Internal PhotoInternal Photos / Adobe Acrobat PDF (555 kB) 2016-06-15 / 2016-12-19
3 FCC RF Exposure_DSSRF Exposure Info / Adobe Acrobat PDF (70 kB) 2016-06-15 / 2016-06-22
3 FCC Authorization Letter-simple formatCover Letter(s) / Adobe Acrobat PDF (358 kB) 2016-06-15 / 2016-06-22
3 (Short-Term Confidential) User ManualUsers Manual / Adobe Acrobat PDF (82 kB) 2016-06-15 / 2016-12-19
3 FCC Test Report_DSS_R1Test Report / Adobe Acrobat PDF (1052 kB) 2016-06-15 / 2016-06-22
3 FCC LMA Letter_unlicensedCover Letter(s) / Adobe Acrobat PDF (539 kB) 2016-06-15 / 2016-06-22
3 Label and LocationID Label/Location Info / Adobe Acrobat PDF (34 kB) 2016-06-15 / 2016-06-22
3 FCC Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (324 kB) 2016-06-15 / 2016-06-22
4 FCC Authorization Letter-simple formatCover Letter(s) / Adobe Acrobat PDF (365 kB) 2017-04-19 / 2017-04-20
4 (Short term confidential) FCC Test Setup Photo_NIITest Setup Photos / Adobe Acrobat PDF (783 kB) 2017-04-19 / 2017-10-18
4 FCC Class II Permissive Change LetterCover Letter(s) / Adobe Acrobat PDF (394 kB) 2017-04-19 / 2017-04-20
4 (Short-Term Confidential) External PhotoExternal Photos / Adobe Acrobat PDF (182 kB) 2017-04-19 / 2017-10-18
4 FCC Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (321 kB) 2017-04-19 / 2017-04-20
4 FCC Request for Short-term Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (325 kB) 2017-04-19 / 2017-04-20
4 FCC Special Power of AttorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2017-04-19 / 2017-04-20
4 FCC Test Report_NIITest Report / Adobe Acrobat PDF (1266 kB) 2017-04-19 / 2017-04-20
5 C2PC letterCover Letter(s) / Adobe Acrobat PDF (387 kB) 2016-08-03 / 2016-08-03
5 Test report2(DSS)Test Report / Adobe Acrobat PDF (465 kB) 2016-08-03 / 2016-08-03
5 Confidentiality letter(long)Cover Letter(s) / Adobe Acrobat PDF (321 kB) 2016-08-03 / 2016-08-03
5 Test setup photos1Test Setup Photos / Adobe Acrobat PDF (610 kB) 2016-08-03 / 2017-01-30
5 Confidentiality letter(short)Cover Letter(s) / Adobe Acrobat PDF (329 kB) 2016-08-03 / 2016-08-03
5 Test setup photos2Test Setup Photos / Adobe Acrobat PDF (635 kB) 2016-08-03 / 2017-01-30
5 Power of attorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2016-08-03 / 2016-08-03
5 External photos1External Photos / Adobe Acrobat PDF (140 kB) 2016-08-03 / 2017-01-30
5 RF EXRF Exposure Info / Adobe Acrobat PDF (31 kB) 2016-08-03 / 2016-08-03
5 Autorization letterCover Letter(s) / Adobe Acrobat PDF (361 kB) 2016-08-03 / 2016-08-03
5 External photos2External Photos / Adobe Acrobat PDF (154 kB) 2016-08-03 / 2017-01-30
5 Test report1(DSS)Test Report / Adobe Acrobat PDF (641 kB) 2016-08-03 / 2016-08-03
6 FCC Authorization Letter-simple formatCover Letter(s) / Adobe Acrobat PDF (358 kB) 2016-06-16 / 2016-06-22
6 (Short-Term Confidential) User ManualUsers Manual / Adobe Acrobat PDF (82 kB) 2016-06-16 / 2016-12-19
6 FCC Test Report_DTS_R1Test Report / Adobe Acrobat PDF (1085 kB) 2016-06-16 / 2016-06-22
6 FCC LMA Letter_unlicensedCover Letter(s) / Adobe Acrobat PDF (539 kB) 2016-06-16 / 2016-06-22
6 Label and LocationID Label/Location Info / Adobe Acrobat PDF (34 kB) 2016-06-16 / 2016-06-22
6 FCC Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (324 kB) 2016-06-16 / 2016-06-22
6 (Short term confidential) FCC Test Setup Photo_DTS_R1Test Setup Photos / Adobe Acrobat PDF (1591 kB) 2016-06-16 / 2016-12-19
6 FCC Request for Short-term Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (327 kB) 2016-06-16 / 2016-06-22
6 (Short-Term Confidential) External PhotoExternal Photos / Adobe Acrobat PDF (110 kB) 2016-06-16 / 2016-12-19
6 FCC Special Power of AttorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2016-06-16 / 2016-06-22
6 (Short-Term Confidential) Internal PhotoInternal Photos / Adobe Acrobat PDF (555 kB) 2016-06-16 / 2016-12-19
6 FCC RF Exposure_DTSRF Exposure Info / Adobe Acrobat PDF (63 kB) 2016-06-16 / 2016-06-22
7 Confidentiality letter(short)Cover Letter(s) / Adobe Acrobat PDF (329 kB) 2016-08-03 / 2016-08-03
7 Test setup photos2Test Setup Photos / Adobe Acrobat PDF (794 kB) 2016-08-03 / 2017-01-30
7 Power of attorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2016-08-03 / 2016-08-03
7 External photos1External Photos / Adobe Acrobat PDF (140 kB) 2016-08-03 / 2017-01-30
7 RF EXRF Exposure Info / Adobe Acrobat PDF (22 kB) 2016-08-03 / 2016-08-03
7 Authorization letterCover Letter(s) / Adobe Acrobat PDF (361 kB) 2016-08-03 / 2016-08-03
7 External photos2External Photos / Adobe Acrobat PDF (154 kB) 2016-08-03 / 2017-01-30
7 Test report1Test Report / Adobe Acrobat PDF (1788 kB) 2016-08-03 / 2016-08-03
7 C2PC letterCover Letter(s) / Adobe Acrobat PDF (387 kB) 2016-08-03 / 2016-08-03
7 Test report2Test Report / Adobe Acrobat PDF (1069 kB) 2016-08-03 / 2016-08-03
7 Confidentiality letter(long)Cover Letter(s) / Adobe Acrobat PDF (321 kB) 2016-08-03 / 2016-08-03
7 Test setup photos1Test Setup Photos / Adobe Acrobat PDF (758 kB) 2016-08-03 / 2017-01-30
8 (Short-Term Confidential) Internal PhotoInternal Photos / Adobe Acrobat PDF (555 kB) 2016-06-16 / 2016-12-19
8 FCC Test Report_NII_R1Test Report / Adobe Acrobat PDF (2702 kB) 2016-06-16 / 2016-06-22
8 FCC Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (324 kB) 2016-06-16 / 2016-06-22
8 (Short-Term Confidential) User ManualUsers Manual / Adobe Acrobat PDF (82 kB) 2016-06-16 / 2016-12-19
8 Label and LocationID Label/Location Info / Adobe Acrobat PDF (34 kB) 2016-06-16 / 2016-06-22
8 FCC Request for Short-term Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (327 kB) 2016-06-16 / 2016-06-22
8 (Short term confidential) FCC DFS Test Setup Photo_R1Test Setup Photos / Adobe Acrobat PDF (236 kB) 2016-06-16 / 2016-12-19
8 FCC Special Power of AttorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2016-06-16 / 2016-06-22
8 FCC Authorization Letter-simple formatCover Letter(s) / Adobe Acrobat PDF (358 kB) 2016-06-16 / 2016-06-22
8 (Short term confidential) FCC Test Setup Photo_NII_R1Test Setup Photos / Adobe Acrobat PDF (1427 kB) 2016-06-16 / 2016-12-19
8 FCC DFS Report_R1Test Report / Adobe Acrobat PDF (225 kB) 2016-06-16 / 2016-06-22
8 FCC Declaration Letter of FCC 14-30_Old rule or New ruleCover Letter(s) / Adobe Acrobat PDF (304 kB) 2016-06-16 / 2016-06-22
8 (Short-Term Confidential) External PhotoExternal Photos / Adobe Acrobat PDF (110 kB) 2016-06-16 / 2016-12-19
8 FCC RF Exposure_NIIRF Exposure Info / Adobe Acrobat PDF (26 kB) 2016-06-16 / 2016-06-22
8 FCC LMA Letter_unlicensedCover Letter(s) / Adobe Acrobat PDF (539 kB) 2016-06-16 / 2016-06-22
9 (Short-Term Confidential) External PhotoExternal Photos / Adobe Acrobat PDF (182 kB) 2017-04-19 / 2017-10-18
9 FCC Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (321 kB) 2017-04-19 / 2017-04-20
9 FCC Request for Short-term Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (325 kB) 2017-04-19 / 2017-04-20
9 FCC Special Power of AttorneyCover Letter(s) / Adobe Acrobat PDF (314 kB) 2017-04-19 / 2017-04-20
9 FCC Test Report_DTSTest Report / Adobe Acrobat PDF (950 kB) 2017-04-19 / 2017-04-20
9 FCC Authorization Letter-simple formatCover Letter(s) / Adobe Acrobat PDF (365 kB) 2017-04-19 / 2017-04-20
9 (Short term confidential) FCC Test Setup Photo_DTSTest Setup Photos / Adobe Acrobat PDF (782 kB) 2017-04-19 / 2017-10-18
9 FCC Class II Permissive Change LetterCover Letter(s) / Adobe Acrobat PDF (394 kB) 2017-04-19 / 2017-04-20

APP # 1 (2017-04-20) Documents

(Short term confidential) FCC Test Setup Photo_DSS
 2017-04-19 / 2017-10-18 Test Setup Photos / Adobe Acrobat PDF (637 kB)
Authorization Letter-simple format
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (365 kB)
Special Power of Attorney
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Short-Term Confidential) External Photo
 2017-04-19 / 2017-10-18 External Photos / Adobe Acrobat PDF (182 kB)
Class II Permissive Change Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (394 kB)
(Confidential)Theory of Operation-Antenna List
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (61 kB)
Test Report_DSS
 2017-04-19 / 2017-04-20 Test Report / Adobe Acrobat PDF (354 kB)
Authorization Letter-simple format
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (365 kB)
(Confidential)Theory of Operation-Antenna Specification_ANT_B_IFA
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (274 kB)
Request for Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
(Short term confidential) FCC Test Setup Photo_DSS
 2017-04-19 / 2017-10-18 Test Setup Photos / Adobe Acrobat PDF (637 kB)
Class II Permissive Change Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (394 kB)
(Confidential)Theory of Operation-Antenna Specification_ANT_C_2310935
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (530 kB)
Request for Short-term Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (325 kB)
Test Report_DSS
 2017-04-19 / 2017-04-20 Test Report / Adobe Acrobat PDF (354 kB)
Request for Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
(Confidential)Theory of Operation-Difference
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (261 kB)
Special Power of Attorney
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Short-Term Confidential) External Photo
 2017-04-19 / 2017-10-18 External Photos / Adobe Acrobat PDF (182 kB)
Request for Short-term Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (325 kB)

APP # 2 (2016-08-03) Documents

External photos2
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (154 kB)
Confidentiality letter(long)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
Authorization letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (361 kB)
Test report(DTS2)
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (403 kB)
Operational description(Ant-C2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (534 kB)
Test setup photos1
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (1106 kB)
Operational description(Ant-A1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (406 kB)
Confidentiality letter(short)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (329 kB)
Test setup photos1
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (1106 kB)
C2PC letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (387 kB)
Operational description(Antenna list)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (43 kB)
Test setup photos2
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (1163 kB)
Operational description(Ant-A2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (498 kB)
power of attorney
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
Test setup photos2
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (1163 kB)
Confidentiality letter(long)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
power of attorney
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
External photos1
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (140 kB)
Operational description(Ant-B1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (175 kB)
RF EX
 2016-08-03 / 2016-08-03 RF Exposure Info / Adobe Acrobat PDF (28 kB)
Authorization letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (361 kB)
Confidentiality letter(short)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (329 kB)
RF EX
 2016-08-03 / 2016-08-03 RF Exposure Info / Adobe Acrobat PDF (28 kB)
External photos2
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (154 kB)
Operational description(Ant-B2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (282 kB)
Test report(DTS1)
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (433 kB)
External photos1
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (140 kB)
C2PC letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (387 kB)
Test report(DTS1)
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (433 kB)
Operational description(Ant-C1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (410 kB)
Test report(DTS2)
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (403 kB)

APP # 3 (2016-06-22) Documents

FCC Authorization Letter-simple format
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (358 kB)
(Short term confidential) FCC Test Setup Photo_DSS_R1
 2016-06-15 / 2016-12-19 Test Setup Photos / Adobe Acrobat PDF (1253 kB)
(Confidential) Theory of Operation-Specification
 2016-06-15 / N/A Operational Description / Adobe Acrobat PDF (73 kB)
FCC Request for Short-term Confidentiality Letter
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (327 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_A
 2016-06-15 / N/A Operational Description / Adobe Acrobat PDF (245 kB)
FCC Test Report_DSS_R1
 2016-06-15 / 2016-06-22 Test Report / Adobe Acrobat PDF (1052 kB)
FCC LMA Letter_unlicensed
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (539 kB)
(Short-Term Confidential) External Photo
 2016-06-15 / 2016-12-19 External Photos / Adobe Acrobat PDF (110 kB)
(Short term confidential) FCC Test Setup Photo_DSS_R1
 2016-06-15 / 2016-12-19 Test Setup Photos / Adobe Acrobat PDF (1253 kB)
FCC Special Power of Attorney
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
Label and Location
 2016-06-15 / 2016-06-22 ID Label/Location Info / Adobe Acrobat PDF (34 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_B
 2016-06-15 / N/A Operational Description / Adobe Acrobat PDF (108 kB)
(Confidential) Block Diagram
 2016-06-15 / N/A Block Diagram / Adobe Acrobat PDF (27 kB)
FCC Request for Confidentiality Letter
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (324 kB)
(Short-Term Confidential) Internal Photo
 2016-06-15 / 2016-12-19 Internal Photos / Adobe Acrobat PDF (555 kB)
(Short-Term Confidential) External Photo
 2016-06-15 / 2016-12-19 External Photos / Adobe Acrobat PDF (110 kB)
FCC RF Exposure_DSS
 2016-06-15 / 2016-06-22 RF Exposure Info / Adobe Acrobat PDF (70 kB)
FCC Authorization Letter-simple format
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (358 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_C
 2016-06-15 / N/A Operational Description / Adobe Acrobat PDF (226 kB)
(Confidential) Schematics
 2016-06-15 / N/A Schematics / Adobe Acrobat PDF (149 kB)
FCC Request for Short-term Confidentiality Letter
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (327 kB)
(Short-Term Confidential) User Manual
 2016-06-15 / 2016-12-19 Users Manual / Adobe Acrobat PDF (82 kB)
(Short-Term Confidential) Internal Photo
 2016-06-15 / 2016-12-19 Internal Photos / Adobe Acrobat PDF (555 kB)
FCC Test Report_DSS_R1
 2016-06-15 / 2016-06-22 Test Report / Adobe Acrobat PDF (1052 kB)
FCC LMA Letter_unlicensed
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (539 kB)
(Confidential) Theory of Operation-Channel List
 2016-06-15 / N/A Operational Description / Adobe Acrobat PDF (177 kB)
(Confidential) Theory of Operation
 2016-06-15 / N/A Operational Description / Adobe Acrobat PDF (146 kB)
FCC RF Exposure_DSS
 2016-06-15 / 2016-06-22 RF Exposure Info / Adobe Acrobat PDF (70 kB)
(Short-Term Confidential) User Manual
 2016-06-15 / 2016-12-19 Users Manual / Adobe Acrobat PDF (82 kB)
Label and Location
 2016-06-15 / 2016-06-22 ID Label/Location Info / Adobe Acrobat PDF (34 kB)
(Confidential) Theory of Operation-Hopping Sequence
 2016-06-15 / N/A Operational Description / Adobe Acrobat PDF (168 kB)
FCC Request for Confidentiality Letter
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (324 kB)
(Confidential) Theory of Operation-Antenna List
 2016-06-15 / N/A Operational Description / Adobe Acrobat PDF (17 kB)
FCC Special Power of Attorney
 2016-06-15 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (314 kB)

APP # 4 (2017-04-20) Documents

FCC Authorization Letter-simple format
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (365 kB)
FCC Class II Permissive Change Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (394 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_C_2310935
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (530 kB)
(Short term confidential) FCC Test Setup Photo_NII
 2017-04-19 / 2017-10-18 Test Setup Photos / Adobe Acrobat PDF (783 kB)
FCC Class II Permissive Change Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (394 kB)
FCC Request for Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
(Confidential) Theory of Operation-Difference
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (261 kB)
(Short-Term Confidential) External Photo
 2017-04-19 / 2017-10-18 External Photos / Adobe Acrobat PDF (182 kB)
FCC Request for Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
FCC Request for Short-term Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (325 kB)
(Short term confidential) FCC Test Setup Photo_NII
 2017-04-19 / 2017-10-18 Test Setup Photos / Adobe Acrobat PDF (783 kB)
FCC Request for Short-term Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (325 kB)
FCC Special Power of Attorney
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Short-Term Confidential) External Photo
 2017-04-19 / 2017-10-18 External Photos / Adobe Acrobat PDF (182 kB)
FCC Special Power of Attorney
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Confidential) Theory of Operation-Antenna List
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (61 kB)
FCC Test Report_NII
 2017-04-19 / 2017-04-20 Test Report / Adobe Acrobat PDF (1266 kB)
FCC Authorization Letter-simple format
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (365 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_B_IFA
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (274 kB)
FCC Test Report_NII
 2017-04-19 / 2017-04-20 Test Report / Adobe Acrobat PDF (1266 kB)

APP # 5 (2016-08-03) Documents

External photos1
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (140 kB)
C2PC letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (387 kB)
Test report1(DSS)
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (641 kB)
Operational description(Ant-C1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (410 kB)
Test report2(DSS)
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (465 kB)
External photos2
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (154 kB)
Confidentiality letter(long)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
Autorization letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (361 kB)
Test report2(DSS)
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (465 kB)
Operational description(Ant-C2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (534 kB)
Test setup photos1
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (610 kB)
Confidentiality letter(short)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (329 kB)
Operational description(Ant-A1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (406 kB)
C2PC letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (387 kB)
Test setup photos1
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (610 kB)
Operational description(Antenna list)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (43 kB)
Test setup photos2
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (635 kB)
Power of attorney
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
Operational description(Ant-A2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (498 kB)
Confidentiality letter(long)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
Test setup photos2
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (635 kB)
Power of attorney
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
External photos1
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (140 kB)
Operational description(Ant-B1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (175 kB)
RF EX
 2016-08-03 / 2016-08-03 RF Exposure Info / Adobe Acrobat PDF (31 kB)
Confidentiality letter(short)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (329 kB)
Autorization letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (361 kB)
RF EX
 2016-08-03 / 2016-08-03 RF Exposure Info / Adobe Acrobat PDF (31 kB)
External photos2
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (154 kB)
Operational description(Ant-B2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (282 kB)
Test report1(DSS)
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (641 kB)

APP # 6 (2016-06-22) Documents

(Confidential) Theory of Operation-Antenna Specification_ANT_C
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (226 kB)
FCC Authorization Letter-simple format
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (358 kB)
FCC Request for Short-term Confidentiality Letter
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (327 kB)
(Short-Term Confidential) User Manual
 2016-06-16 / 2016-12-19 Users Manual / Adobe Acrobat PDF (82 kB)
(Confidential) Schematics
 2016-06-16 / N/A Schematics / Adobe Acrobat PDF (149 kB)
(Short-Term Confidential) Internal Photo
 2016-06-16 / 2016-12-19 Internal Photos / Adobe Acrobat PDF (555 kB)
FCC Test Report_DTS_R1
 2016-06-16 / 2016-06-22 Test Report / Adobe Acrobat PDF (1085 kB)
(Confidential) Theory of Operation-Channel List
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (177 kB)
FCC LMA Letter_unlicensed
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (539 kB)
(Confidential) Theory of Operation
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (146 kB)
FCC RF Exposure_DTS
 2016-06-16 / 2016-06-22 RF Exposure Info / Adobe Acrobat PDF (63 kB)
Label and Location
 2016-06-16 / 2016-06-22 ID Label/Location Info / Adobe Acrobat PDF (34 kB)
(Short-Term Confidential) User Manual
 2016-06-16 / 2016-12-19 Users Manual / Adobe Acrobat PDF (82 kB)
(Confidential) Theory of Operation-Interface Specification
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (36 kB)
FCC Request for Confidentiality Letter
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (324 kB)
(Confidential) Theory of Operation-Antenna List
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (17 kB)
FCC Special Power of Attorney
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Short term confidential) FCC Test Setup Photo_DTS_R1
 2016-06-16 / 2016-12-19 Test Setup Photos / Adobe Acrobat PDF (1591 kB)
FCC Authorization Letter-simple format
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (358 kB)
(Confidential) Theory of Operation-Specification
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (73 kB)
FCC Request for Short-term Confidentiality Letter
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (327 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_A
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (245 kB)
FCC Test Report_DTS_R1
 2016-06-16 / 2016-06-22 Test Report / Adobe Acrobat PDF (1085 kB)
(Short-Term Confidential) External Photo
 2016-06-16 / 2016-12-19 External Photos / Adobe Acrobat PDF (110 kB)
FCC LMA Letter_unlicensed
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (539 kB)
(Short term confidential) FCC Test Setup Photo_DTS_R1
 2016-06-16 / 2016-12-19 Test Setup Photos / Adobe Acrobat PDF (1591 kB)
FCC Special Power of Attorney
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_B
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (108 kB)
Label and Location
 2016-06-16 / 2016-06-22 ID Label/Location Info / Adobe Acrobat PDF (34 kB)
FCC Request for Confidentiality Letter
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (324 kB)
(Short-Term Confidential) Internal Photo
 2016-06-16 / 2016-12-19 Internal Photos / Adobe Acrobat PDF (555 kB)
(Confidential) Block Diagram
 2016-06-16 / N/A Block Diagram / Adobe Acrobat PDF (27 kB)
(Short-Term Confidential) External Photo
 2016-06-16 / 2016-12-19 External Photos / Adobe Acrobat PDF (110 kB)
FCC RF Exposure_DTS
 2016-06-16 / 2016-06-22 RF Exposure Info / Adobe Acrobat PDF (63 kB)

APP # 7 (2016-08-03) Documents

Operational description(Ant-A1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (406 kB)
Confidentiality letter(short)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (329 kB)
C2PC letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (387 kB)
Test setup photos1
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (758 kB)
Test setup photos2
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (794 kB)
Operational description(Antenna list)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (43 kB)
Operational description(Ant-A2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (498 kB)
Power of attorney
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
Confidentiality letter(long)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
Test setup photos2
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (794 kB)
Power of attorney
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
External photos1
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (140 kB)
Operational description(Ant-B1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (175 kB)
RF EX
 2016-08-03 / 2016-08-03 RF Exposure Info / Adobe Acrobat PDF (22 kB)
Confidentiality letter(short)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (329 kB)
Authorization letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (361 kB)
RF EX
 2016-08-03 / 2016-08-03 RF Exposure Info / Adobe Acrobat PDF (22 kB)
External photos2
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (154 kB)
Operational description(Ant-B2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (282 kB)
Test report1
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (1788 kB)
External photos1
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (140 kB)
C2PC letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (387 kB)
Test report1
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (1788 kB)
Operational description(Ant-C1)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (410 kB)
Test report2
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (1069 kB)
External photos2
 2016-08-03 / 2017-01-30 External Photos / Adobe Acrobat PDF (154 kB)
Confidentiality letter(long)
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
Authorization letter
 2016-08-03 / 2016-08-03 Cover Letter(s) / Adobe Acrobat PDF (361 kB)
Test report2
 2016-08-03 / 2016-08-03 Test Report / Adobe Acrobat PDF (1069 kB)
Test setup photos1
 2016-08-03 / 2017-01-30 Test Setup Photos / Adobe Acrobat PDF (758 kB)
Operational description(Ant-C2)
 2016-08-03 / N/A Operational Description / Adobe Acrobat PDF (534 kB)

APP # 8 (2016-06-22) Documents

FCC Special Power of Attorney
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Short-Term Confidential) Internal Photo
 2016-06-16 / 2016-12-19 Internal Photos / Adobe Acrobat PDF (555 kB)
(Confidential) Theory of Operation-Channel List
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (177 kB)
(Confidential) Theory of Operation
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (146 kB)
FCC DFS Report_R1
 2016-06-16 / 2016-06-22 Test Report / Adobe Acrobat PDF (225 kB)
FCC Test Report_NII_R1
 2016-06-16 / 2016-06-22 Test Report / Adobe Acrobat PDF (2702 kB)
(Short-Term Confidential) External Photo
 2016-06-16 / 2016-12-19 External Photos / Adobe Acrobat PDF (110 kB)
FCC Request for Confidentiality Letter
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (324 kB)
FCC Test Report_NII_R1
 2016-06-16 / 2016-06-22 Test Report / Adobe Acrobat PDF (2702 kB)
(Short-Term Confidential) User Manual
 2016-06-16 / 2016-12-19 Users Manual / Adobe Acrobat PDF (82 kB)
(Confidential) Theory of Operation-Interface Specification
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (36 kB)
(Confidential) Theory of Operation-Antenna List
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (17 kB)
FCC LMA Letter_unlicensed
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (539 kB)
Label and Location
 2016-06-16 / 2016-06-22 ID Label/Location Info / Adobe Acrobat PDF (34 kB)
(Short-Term Confidential) Internal Photo
 2016-06-16 / 2016-12-19 Internal Photos / Adobe Acrobat PDF (555 kB)
FCC Request for Short-term Confidentiality Letter
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (327 kB)
(Confidential) Theory of Operation-Software Security
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (41 kB)
Label and Location
 2016-06-16 / 2016-06-22 ID Label/Location Info / Adobe Acrobat PDF (34 kB)
(Short term confidential) FCC DFS Test Setup Photo_R1
 2016-06-16 / 2016-12-19 Test Setup Photos / Adobe Acrobat PDF (236 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_A
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (245 kB)
FCC Request for Confidentiality Letter
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (324 kB)
(Short-Term Confidential) User Manual
 2016-06-16 / 2016-12-19 Users Manual / Adobe Acrobat PDF (82 kB)
FCC Special Power of Attorney
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Confidential) Theory of Operation-Specification
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (73 kB)
FCC Authorization Letter-simple format
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (358 kB)
(Short term confidential) FCC Test Setup Photo_NII_R1
 2016-06-16 / 2016-12-19 Test Setup Photos / Adobe Acrobat PDF (1427 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_B
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (108 kB)
FCC Request for Short-term Confidentiality Letter
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (327 kB)
(Confidential) Block Diagram
 2016-06-16 / N/A Block Diagram / Adobe Acrobat PDF (27 kB)
FCC Authorization Letter-simple format
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (358 kB)
FCC DFS Report_R1
 2016-06-16 / 2016-06-22 Test Report / Adobe Acrobat PDF (225 kB)
(Short term confidential) FCC DFS Test Setup Photo_R1
 2016-06-16 / 2016-12-19 Test Setup Photos / Adobe Acrobat PDF (236 kB)
FCC Declaration Letter of FCC 14-30_Old rule or New rule
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (304 kB)
FCC RF Exposure_NII
 2016-06-16 / 2016-06-22 RF Exposure Info / Adobe Acrobat PDF (26 kB)
(Short-Term Confidential) External Photo
 2016-06-16 / 2016-12-19 External Photos / Adobe Acrobat PDF (110 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_C
 2016-06-16 / N/A Operational Description / Adobe Acrobat PDF (226 kB)
(Confidential) Schematics
 2016-06-16 / N/A Schematics / Adobe Acrobat PDF (149 kB)
FCC Declaration Letter of FCC 14-30_Old rule or New rule
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (304 kB)
FCC RF Exposure_NII
 2016-06-16 / 2016-06-22 RF Exposure Info / Adobe Acrobat PDF (26 kB)
(Short term confidential) FCC Test Setup Photo_NII_R1
 2016-06-16 / 2016-12-19 Test Setup Photos / Adobe Acrobat PDF (1427 kB)
FCC LMA Letter_unlicensed
 2016-06-16 / 2016-06-22 Cover Letter(s) / Adobe Acrobat PDF (539 kB)

APP # 9 (2017-04-20) Documents

FCC Request for Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
(Confidential) Theory of Operation-Difference
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (261 kB)
(Short-Term Confidential) External Photo
 2017-04-19 / 2017-10-18 External Photos / Adobe Acrobat PDF (182 kB)
FCC Request for Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (321 kB)
FCC Request for Short-term Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (325 kB)
(Short term confidential) FCC Test Setup Photo_DTS
 2017-04-19 / 2017-10-18 Test Setup Photos / Adobe Acrobat PDF (782 kB)
FCC Request for Short-term Confidentiality Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (325 kB)
FCC Special Power of Attorney
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
(Short-Term Confidential) External Photo
 2017-04-19 / 2017-10-18 External Photos / Adobe Acrobat PDF (182 kB)
(Confidential) Theory of Operation-Antenna List
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (61 kB)
FCC Special Power of Attorney
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (314 kB)
FCC Test Report_DTS
 2017-04-19 / 2017-04-20 Test Report / Adobe Acrobat PDF (950 kB)
FCC Authorization Letter-simple format
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (365 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_B_IFA
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (274 kB)
FCC Test Report_DTS
 2017-04-19 / 2017-04-20 Test Report / Adobe Acrobat PDF (950 kB)
FCC Authorization Letter-simple format
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (365 kB)
FCC Class II Permissive Change Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (394 kB)
(Confidential) Theory of Operation-Antenna Specification_ANT_C_2310935
 2017-04-19 / N/A Operational Description / Adobe Acrobat PDF (530 kB)
(Short term confidential) FCC Test Setup Photo_DTS
 2017-04-19 / 2017-10-18 Test Setup Photos / Adobe Acrobat PDF (782 kB)
FCC Class II Permissive Change Letter
 2017-04-19 / 2017-04-20 Cover Letter(s) / Adobe Acrobat PDF (394 kB)

Grants

TCB Grant from App #1 (2017-04-20)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/20/2017

Application Dated: 04/19/2017
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant from App #1 (2017-04-20)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 04/20/2017

Application Dated: 04/19/2017
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA862064

TCB Grant from App #2 (2016-08-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/03/2016

Application Dated: 08/03/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1966  
CC MO 15C 2402.0  -  2480.0 0.0017  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #2 (2016-08-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 08/03/2016

Application Dated: 08/03/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1966  
CC MO 15C 2402.0  -  2480.0 0.0017  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA510446

TCB Grant from App #3 (2016-06-22)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/22/2016

Application Dated: 06/15/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  

Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant from App #3 (2016-06-22)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 06/22/2016

Application Dated: 06/15/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  

Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA995048

TCB Grant from App #4 (2017-04-20)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/20/2017

Application Dated: 04/19/2017
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5320.0 0.0155  
38 CC MO 15E 5500.0  -  5700.0 0.0153  
38 CC MO 15E 5745.0  -  5825.0 0.0145  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #4 (2017-04-20)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 04/20/2017

Application Dated: 04/19/2017
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5320.0 0.0155  
38 CC MO 15E 5500.0  -  5700.0 0.0153  
38 CC MO 15E 5745.0  -  5825.0 0.0145  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA284830

TCB Grant from App #5 (2016-08-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/03/2016

Application Dated: 08/03/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant from App #5 (2016-08-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 08/03/2016

Application Dated: 08/03/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA627935

TCB Grant from App #6 (2016-06-22)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/22/2016

Application Dated: 06/16/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1966  
CC 15C 2402.0  -  2480.0 0.0017  

Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #6 (2016-06-22)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 06/22/2016

Application Dated: 06/16/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1966  
CC 15C 2402.0  -  2480.0 0.0017  

Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA339916

TCB Grant from App #7 (2016-08-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/03/2016

Application Dated: 08/03/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5320.0 0.0155  
38 CC MO 15E 5500.0  -  5700.0 0.0153  
38 CC MO 15E 5745.0  -  5825.0 0.0145  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #7 (2016-08-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 08/03/2016

Application Dated: 08/03/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5320.0 0.0155  
38 CC MO 15E 5500.0  -  5700.0 0.0153  
38 CC MO 15E 5745.0  -  5825.0 0.0145  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA427774

TCB Grant from App #8 (2016-06-22)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/22/2016

Application Dated: 06/16/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5320.0 0.0155  
38 CC MO 15E 5500.0  -  5700.0 0.0153  
38 CC MO 15E 5745.0  -  5825.0 0.0145  

Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #8 (2016-06-22)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 06/22/2016

Application Dated: 06/16/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5320.0 0.0155  
38 CC MO 15E 5500.0  -  5700.0 0.0153  
38 CC MO 15E 5745.0  -  5825.0 0.0145  

Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA887709

TCB Grant from App #9 (2017-04-20)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/20/2017

Application Dated: 04/19/2017
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1966  
CC 15C 2402.0  -  2480.0 0.0017  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #9 (2017-04-20)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 04/20/2017

Application Dated: 04/19/2017
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8M16DFL1
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless communication module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1966  
CC 15C 2402.0  -  2480.0 0.0017  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA761247

Applications for this FCC ID

Form App # 1 (2017-04-20)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: 3+7uK1nZoMlsWVJklCNnRQ==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   10/18/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 2 (2016-08-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: 95bmAU+r2IdRI66sltmYqw==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/30/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 3 (2016-06-22)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: e/CdAbtfvKE1qu7fxyhTVQ==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   12/19/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 4 (2017-04-20)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: EL4Dj+er3GzaRQpWgtvp3g==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   10/18/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 5 (2016-08-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: ExXTug2i8HNP0idZlUe/Uw==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/30/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 6 (2016-06-22)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: kqkQfN9wr1hlQsxRDa52rg==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   12/19/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 7 (2016-08-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: KtnCqvbN+iajAOavRRCDhQ==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/30/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 8 (2016-06-22)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: NWLJY+8HVa5vDiGgJ/N8uA==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   12/19/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 9 (2017-04-20)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8M16DFL1
Unique Application Identifier: RDfSktjU6GOxx+GmwVOweg==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: M16DFL1

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takayuki
Last Name: Shimada
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   10/18/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless communication module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Applications are submitted for FCC ID and Grant requests. Click an above application to view details


© FCCID.io 2025