FCC ID HN22011B-2

HN2-2011B-2, HN2 2011B2, HN22011B-2, HN22O11B-2, HN220IIB-2

Intermec Technologies Corporation 2011B Radio in 700C and 751G

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: HN22011B-2 is . The remaining characters of the FCC ID, 2011B-2, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Intermec Technologies Corporation

Full Company Details: Intermec Technologies Corporation - HN2
Company Code: HN2
Address:
   Intermec Technologies Corporation
   9680 Old Bailes Rd.
   Fort Mill, SC 29707
   United States
App # Purpose Date Unique ID
1 Class II Permissive Change 2004-07-07 cl7S7szmab7609srszkDIA==
2 Class II Permissive Change 2005-01-12 EcDs7nqK+PjNsKEav3t32w==
3 Class II Permissive Change 2004-01-21 FS1Z21jjrjHMA3E2/t1Awg==
4 Class II Permissive Change 2005-01-13 IJIseGTciZ8Wj+dfS8Yogg==
5 Class II Permissive Change 2005-01-13 iQloexlAegbXckN/YHYmBg==
6 Class II Permissive Change 2004-05-26 r6+YhH3CASWRi2o5cZacmA==
7 Class II Permissive Change 2004-01-20 WrLhKvylZf0c41HU6i7pkw==
8 Original Equipment 2003-07-29 XbKeiPMnR3GsWhbKQJ5g2Q==

Approved Operating Frequencies

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 User Manual 1of2Users Manual / Adobe Acrobat PDF (2761 kB) 2004-07-07 / 2004-07-07
1 TEchnical Report ITRM0026Test Report / Adobe Acrobat PDF (2828 kB) 2004-07-07 / 2004-07-07
1 User Manual 2 of 2Users Manual / Adobe Acrobat PDF (1533 kB) 2004-07-07 / 2004-07-07
1 RF Exposure MPE EstimatesRF Exposure Info / Adobe Acrobat PDF (44 kB) 2004-07-07 / 2004-07-07
1 Compliance OpinionCover Letter(s) / Adobe Acrobat PDF (66 kB) 2004-07-07 / 2004-07-07
1 Technical Report ITRM0033Test Report / Adobe Acrobat PDF (944 kB) 2004-07-07 / 2004-07-07
1 Agent Authorization LetterCover Letter(s) / Adobe Acrobat PDF (95 kB) 2004-07-07 / 2004-07-07
1 Test Setup PhotosTest Setup Photos / Adobe Acrobat PDF (1767 kB) 2004-07-07 / 2004-07-07
1 Cover Letter from AgentCover Letter(s) / Adobe Acrobat PDF (34 kB) 2004-07-07 / 2004-07-07
2 SAR Report 10 - beltclip specRF Exposure Info / Adobe Acrobat PDF (60 kB) 2004-11-24 / 2005-01-12
2 Compliance Statement InsertUsers Manual / Adobe Acrobat PDF (136 kB) 2005-01-03 / 2005-01-12
2 SAR report 5 - es3dv2-3021 certRF Exposure Info / Adobe Acrobat PDF (843 kB) 2004-11-24 / 2005-01-12
2 SAR Report 13 - main w/ EHAEM3420 - dupl.RF Exposure Info / Adobe Acrobat PDF (3190 kB) 2004-11-24 / 2005-01-12
2 Test Report 1Test Report / Adobe Acrobat PDF (3940 kB) 2004-11-24 / 2005-01-12
2 Agent Authorization letterCover Letter(s) / Adobe Acrobat PDF (45 kB) 2004-11-24 / 2005-01-12
2 Summary List of Relevant FCC ID Combination Options Rev2ID Label/Location Info / Adobe Acrobat PDF (6 kB) 2005-01-03 / 2005-01-12
2 SAR report 6 - es3dv2-3023 certRF Exposure Info / Adobe Acrobat PDF (2493 kB) 2004-11-24 / 2005-01-12
2 Users ManualUsers Manual / Adobe Acrobat PDF (4013 kB) 2004-11-24 / 2005-01-12
2 SAR report 1 - 1900 dip 7/7/04RF Exposure Info / Adobe Acrobat PDF (206 kB) 2004-11-24 / 2005-01-12
2 Test Report 2Test Report / Adobe Acrobat PDF (3368 kB) 2004-11-24 / 2005-01-12
2 Compliance Statement Insert for 700C Rev2Users Manual / Adobe Acrobat PDF (152 kB) 2005-01-05 / 2005-01-12
2 Cover letter from agentCover Letter(s) / Adobe Acrobat PDF (23 kB) 2004-11-24 / 2005-01-12
2 SAR Report 7 - 835 dip certRF Exposure Info / Adobe Acrobat PDF (329 kB) 2004-11-24 / 2005-01-12
2 FCC ID Label and location for FCC ID EHAEM3420ID Label/Location Info / Adobe Acrobat PDF (674 kB) 2004-12-23 / 2005-01-12
2 SAR Report 2 - 835 dip 7/12/04RF Exposure Info / Adobe Acrobat PDF (179 kB) 2004-11-24 / 2005-01-12
2 Test Report 3Test Report / Adobe Acrobat PDF (1003 kB) 2004-11-24 / 2005-01-12
2 FCC ID LabelID Label/Location Info / Adobe Acrobat PDF (851 kB) 2004-11-24 / 2005-01-12
2 SAR report 8 - 1900 dip certRF Exposure Info / Adobe Acrobat PDF (343 kB) 2004-11-24 / 2005-01-12
2 Summary List of relevant FCC ID Combination OptionsID Label/Location Info / Adobe Acrobat PDF (5 kB) 2004-12-23 / 2005-01-12
2 SAR report 3 - 7/7/04 device plotsRF Exposure Info / Adobe Acrobat PDF (3438 kB) 2004-11-24 / 2005-01-12
2 Test Report 4Test Report / Adobe Acrobat PDF (1360 kB) 2004-11-24 / 2005-01-12
2 Internal PhotosInternal Photos / Adobe Acrobat PDF (1560 kB) 2004-11-24 / 2005-01-12
2 SAR report 9 - holster specRF Exposure Info / Adobe Acrobat PDF (124 kB) 2004-11-24 / 2005-01-12
2 Cover letter for SAR Report explaining colocation configurationsCover Letter(s) / Adobe Acrobat PDF (10 kB) 2005-01-03 / 2005-01-12
2 SAR report 4 - 7/12/04 device plotsRF Exposure Info / Adobe Acrobat PDF (2486 kB) 2004-11-24 / 2005-01-12
2 SAR report 11 - main w/ EHAEM3420RF Exposure Info / Adobe Acrobat PDF (3190 kB) 2004-11-24 / 2005-01-12
2 Correspondence with FCCCover Letter(s) / Adobe Acrobat PDF (6 kB) 2004-11-24 / 2005-01-12
3 Test Setup PhotosTest Setup Photos / Adobe Acrobat PDF (356 kB) 2004-01-21 / 2004-01-21
3 Cover letter from agentCover Letter(s) / Adobe Acrobat PDF (27 kB) 2004-01-21 / 2004-01-21
3 User Manual SupplementUsers Manual / Adobe Acrobat PDF (30 kB) 2004-01-21 / 2004-01-21
3 Attestation letter from IntermecAttestation Statements / Adobe Acrobat PDF (40 kB) 2004-01-21 / 2004-01-21
3 Technical ReportTest Report / Adobe Acrobat PDF (2057 kB) 2004-01-21 / 2004-01-21
3 Agent authorization letterCover Letter(s) / Adobe Acrobat PDF (95 kB) 2004-01-21 / 2004-01-21
3 Compliance OpinionCover Letter(s) / Adobe Acrobat PDF (66 kB) 2004-01-21 / 2004-01-21
3 RF ExposureRF Exposure Info / Adobe Acrobat PDF (52 kB) 2004-01-21 / 2004-01-21
4 Technical ReportTest Report / Adobe Acrobat PDF (2417 kB) 2005-01-13 / 2005-01-13
4 RF ExposureRF Exposure Info / Adobe Acrobat PDF (43 kB) 2005-01-13 / 2005-01-13
4 Agent Authorization LetterCover Letter(s) / Adobe Acrobat PDF (45 kB) 2005-01-13 / 2005-01-13
4 Test Setup PhotosTest Setup Photos / Adobe Acrobat PDF (399 kB) 2005-01-13 / 2005-01-13
4 Cover letter from agentCover Letter(s) / Adobe Acrobat PDF (23 kB) 2005-01-13 / 2005-01-13
4 Users ManualUsers Manual / Adobe Acrobat PDF (405 kB) 2005-01-13 / 2005-01-13
4 External PhotosExternal Photos / Adobe Acrobat PDF (807 kB) 2005-01-13 / 2005-01-13
4 Compliance OpinionCover Letter(s) / Adobe Acrobat PDF (19 kB) 2005-01-17 / 2005-01-13
4 FCC ID Label and LocationID Label/Location Info / Adobe Acrobat PDF (129 kB) 2005-01-13 / 2005-01-13
5 Antenna InfoOperational Description / Adobe Acrobat PDF (44 kB) 2005-01-13 / 2005-01-13
5 Compliance Insert 1Users Manual / Adobe Acrobat PDF (80 kB) 2005-01-18 / 2005-01-13
5 SAR Report 5RF Exposure Info / Adobe Acrobat PDF (342 kB) 2005-01-13 / 2005-01-13
5 Internal PhotosInternal Photos / Adobe Acrobat PDF (931 kB) 2005-01-13 / 2005-01-13
5 Attestation letter regarding ChannelsAttestation Statements / Adobe Acrobat PDF (40 kB) 2005-01-13 / 2005-01-13
5 Compliance Insert 2Users Manual / Adobe Acrobat PDF (80 kB) 2005-01-18 / 2005-01-13
5 SAR Report 6RF Exposure Info / Adobe Acrobat PDF (430 kB) 2005-01-13 / 2005-01-13
5 Technical ReportTest Report / Adobe Acrobat PDF (1900 kB) 2005-01-13 / 2005-01-13
5 SAR Report Final VersionRF Exposure Info / Adobe Acrobat PDF (1305 kB) 2005-01-18 / 2005-01-13
5 Cover letterCover Letter(s) / Adobe Acrobat PDF (38 kB) 2005-01-13 / 2005-01-13
5 SAR Report 7RF Exposure Info / Adobe Acrobat PDF (466 kB) 2005-01-13 / 2005-01-13
5 Request for ConfidentialityCover Letter(s) / Adobe Acrobat PDF (53 kB) 2005-01-13 / 2005-01-13
5 External PhotosExternal Photos / Adobe Acrobat PDF (1269 kB) 2005-01-13 / 2005-01-13
5 Users Manual 1Users Manual / Adobe Acrobat PDF (47 kB) 2005-01-13 / 2005-01-13
5 Test Setup PhotosTest Setup Photos / Adobe Acrobat PDF (3406 kB) 2005-01-13 / 2005-01-13
5 FCC ID Label and LocationID Label/Location Info / Adobe Acrobat PDF (49 kB) 2005-01-13 / 2005-01-13
5 Agent Authorization LetterCover Letter(s) / Adobe Acrobat PDF (45 kB) 2005-01-13 / 2005-01-13
5 Users Manual 2Users Manual / Adobe Acrobat PDF (2003 kB) 2005-01-13 / 2005-01-13
5 SAR Report 1RF Exposure Info / Adobe Acrobat PDF (155 kB) 2005-01-13 / 2005-01-13
5 Compliance OpinionCover Letter(s) / Adobe Acrobat PDF (18 kB) 2005-01-13 / 2005-01-13
6 Compliance OpinionCover Letter(s) / Adobe Acrobat PDF (63 kB) 2004-05-26 / 2004-05-26
6 Cover letter from clientCover Letter(s) / Adobe Acrobat PDF (45 kB) 2004-05-26 / 2004-05-26
6 Attestation Letter from Applicant Jan 13 2005Attestation Statements / Adobe Acrobat PDF (44 kB) 2005-01-13 / 2004-05-26
7 700C Host letterjpeg / JPEG Image (127 kB) 2003-12-15 / 2004-01-20
7 Supporting letterCover Letter(s) / Adobe Acrobat PDF (154 kB) 2003-12-15 / 2004-01-20
7 Spurious Resultsjpeg / JPEG Image (164 kB) 2003-12-15 / 2004-01-20
7 Report HeirarchyCover Letter(s) / Microsoft Word (46 kB) 2003-12-15 / 2004-01-20
7 Reference to Test ReportTest Setup Photos / Microsoft Word (32 kB) 2003-12-15 / 2004-01-20
7 LeterCover Letter(s) / Adobe Acrobat PDF (45 kB) 2003-12-15 / 2004-01-20
7 InterMec ReportRF Exposure Info / Adobe Acrobat PDF (3836 kB) 2003-12-15 / 2004-01-20
7 Agents LetterCover Letter(s) / Microsoft Word (70 kB) 2003-12-15 / 2004-01-20
7 Module ReportRF Exposure Info / Adobe Acrobat PDF (2218 kB) 2003-12-15 / 2004-01-20
7 Merger LetterCover Letter(s) / Microsoft Word (957 kB) 2003-12-15 / 2004-01-20
7 Change RequestCover Letter(s) / Adobe Acrobat PDF (373 kB) 2003-12-15 / 2004-01-20
7 Test ReportTest Report / Adobe Acrobat PDF (1581 kB) 2003-12-15 / 2004-01-20
8 CDMA SAR Report Part 1 of 3RF Exposure Info / Adobe Acrobat PDF (2607 kB) 2003-03-16 / 2003-07-29
8 Technical Report Part 4 of 4Test Report / Adobe Acrobat PDF (1160 kB) 2003-03-16 / 2003-07-29
8 Additional Labels 2 of 4ID Label/Location Info / Adobe Acrobat PDF (261 kB) 2003-07-07 / 2003-07-29
8 Internal PhotosInternal Photos / Adobe Acrobat PDF (1957 kB) 2003-03-16 / 2003-07-29
8 Index of ExhibitsCover Letter(s) / Adobe Acrobat PDF (44 kB) 2003-03-16 / 2003-07-29
8 Agent Authorization LetterCover Letter(s) / Adobe Acrobat PDF (109 kB) 2003-03-16 / 2003-07-29
8 CDMA SAR Report Part 2 of 3RF Exposure Info / Adobe Acrobat PDF (2840 kB) 2003-03-16 / 2003-07-29
8 User Manual Part 1 of 2Users Manual / Adobe Acrobat PDF (2886 kB) 2003-03-16 / 2003-07-29
8 Additional Labels 3 of 4ID Label/Location Info / Adobe Acrobat PDF (265 kB) 2003-07-07 / 2003-07-29
8 Antenna DescriptionParts List/Tune Up Info / Adobe Acrobat PDF (39 kB) 2003-03-16 / 2003-07-29
8 Attestation from ApplicantRF Exposure Info / Adobe Acrobat PDF (73 kB) 2003-07-07 / 2003-07-29
8 CDMA SAR Report Part 3 of 3RF Exposure Info / Adobe Acrobat PDF (2651 kB) 2003-03-16 / 2003-07-29
8 Cover Letter from AgentCover Letter(s) / Adobe Acrobat PDF (229 kB) 2003-03-16 / 2003-07-29
8 User Manual Part 2 of 2Users Manual / Adobe Acrobat PDF (1458 kB) 2003-03-16 / 2003-07-29
8 Additional Labels 4 of 4ID Label/Location Info / Adobe Acrobat PDF (256 kB) 2003-07-07 / 2003-07-29
8 Technical Report Part 1 of 4Test Report / Adobe Acrobat PDF (555 kB) 2003-03-16 / 2003-07-29
8 Attestation from SAR Test LabRF Exposure Info / Adobe Acrobat PDF (25 kB) 2003-07-07 / 2003-07-29
8 802 11b SAR ReportRF Exposure Info / Adobe Acrobat PDF (2240 kB) 2003-03-16 / 2003-07-29
8 Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (69 kB) 2003-03-16 / 2003-07-29
8 Test Setup PhotosTest Setup Photos / Adobe Acrobat PDF (1999 kB) 2003-03-16 / 2003-07-29
8 Technical Report Part 2 of 4Test Report / Adobe Acrobat PDF (484 kB) 2003-03-16 / 2003-07-29
8 Attestation Letter from Radio ManufacturerRF Exposure Info / Adobe Acrobat PDF (34 kB) 2003-07-07 / 2003-07-29
8 Bluetooth SAR Report - external test setup not applicableRF Exposure Info / Adobe Acrobat PDF (1468 kB) 2003-03-16 / 2003-07-29
8 FCC ID Label and LocationID Label/Location Info / Adobe Acrobat PDF (1970 kB) 2003-03-16 / 2003-07-29
8 SAR Test Report Cover LettersRF Exposure Info / Adobe Acrobat PDF (56 kB) 2003-03-16 / 2003-07-29
8 Technical Report Part 3 of 4Test Report / Adobe Acrobat PDF (3500 kB) 2003-03-16 / 2003-07-29
8 Additional Labels 1 of 4ID Label/Location Info / Adobe Acrobat PDF (256 kB) 2003-07-07 / 2003-07-29
8 External PhotosExternal Photos / Adobe Acrobat PDF (2349 kB) 2003-03-16 / 2003-07-29
8 Applicant Attestation LetterAttestation Statements / Adobe Acrobat PDF (140 kB) 2003-03-16 / 2003-07-29

APP # 1 (2004-07-07) Documents

User Manual 1of2
 2004-07-07 / 2004-07-07 Users Manual / Adobe Acrobat PDF (2761 kB)
TEchnical Report ITRM0026
 2004-07-07 / 2004-07-07 Test Report / Adobe Acrobat PDF (2828 kB)
TEchnical Report ITRM0026
 2004-07-07 / 2004-07-07 Test Report / Adobe Acrobat PDF (2828 kB)
User Manual 2 of 2
 2004-07-07 / 2004-07-07 Users Manual / Adobe Acrobat PDF (1533 kB)
RF Exposure MPE Estimates
 2004-07-07 / 2004-07-07 RF Exposure Info / Adobe Acrobat PDF (44 kB)
Technical Report ITRM0033
 2004-07-07 / 2004-07-07 Test Report / Adobe Acrobat PDF (944 kB)
Agent Authorization Letter
 2004-07-07 / 2004-07-07 Cover Letter(s) / Adobe Acrobat PDF (95 kB)
Compliance Opinion
 2004-07-07 / 2004-07-07 Cover Letter(s) / Adobe Acrobat PDF (66 kB)
Technical Report ITRM0033
 2004-07-07 / 2004-07-07 Test Report / Adobe Acrobat PDF (944 kB)
Test Setup Photos
 2004-07-07 / 2004-07-07 Test Setup Photos / Adobe Acrobat PDF (1767 kB)
Compliance Opinion
 2004-07-07 / 2004-07-07 Cover Letter(s) / Adobe Acrobat PDF (66 kB)
Agent Authorization Letter
 2004-07-07 / 2004-07-07 Cover Letter(s) / Adobe Acrobat PDF (95 kB)
Test Setup Photos
 2004-07-07 / 2004-07-07 Test Setup Photos / Adobe Acrobat PDF (1767 kB)
User Manual 1of2
 2004-07-07 / 2004-07-07 Users Manual / Adobe Acrobat PDF (2761 kB)
Cover Letter from Agent
 2004-07-07 / 2004-07-07 Cover Letter(s) / Adobe Acrobat PDF (34 kB)
Cover Letter from Agent
 2004-07-07 / 2004-07-07 Cover Letter(s) / Adobe Acrobat PDF (34 kB)
User Manual 2 of 2
 2004-07-07 / 2004-07-07 Users Manual / Adobe Acrobat PDF (1533 kB)
RF Exposure MPE Estimates
 2004-07-07 / 2004-07-07 RF Exposure Info / Adobe Acrobat PDF (44 kB)

APP # 2 (2005-01-12) Documents

SAR Report 12 - main w/ HN2SB555-2
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (1050 kB)
Summary List of relevant FCC ID Combination Options
 2004-12-23 / 2005-01-12 ID Label/Location Info / Adobe Acrobat PDF (5 kB)
SAR Report 10 - beltclip spec
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (60 kB)
Compliance Statement Insert
 2005-01-03 / 2005-01-12 Users Manual / Adobe Acrobat PDF (136 kB)
SAR Report for SB555 attachment 2 of 6
 2004-12-23 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (1329 kB)
SAR report 5 - es3dv2-3021 cert
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (843 kB)
SAR Report 13 - main w/ EHAEM3420 - dupl.
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (3190 kB)
FCC ID Label and location for FCC ID EHAEM3420
 2004-12-23 / 2005-01-12 ID Label/Location Info / Adobe Acrobat PDF (674 kB)
Test Report 1
 2004-11-24 / 2005-01-12 Test Report / Adobe Acrobat PDF (3940 kB)
Compliance Statement Insert for 700C Rev2
 2005-01-05 / 2005-01-12 Users Manual / Adobe Acrobat PDF (152 kB)
SAR report 6 - es3dv2-3023 cert
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (2493 kB)
Users Manual
 2004-11-24 / 2005-01-12 Users Manual / Adobe Acrobat PDF (4013 kB)
SAR Report 13 - main w/ EHAEM3420 - dupl.
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (3190 kB)
Summary List of Relevant FCC ID Combination Options Rev2
 2005-01-03 / 2005-01-12 ID Label/Location Info / Adobe Acrobat PDF (6 kB)
Agent Authorization letter
 2004-11-24 / 2005-01-12 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
Summary List of Relevant FCC ID Combination Options Rev2
 2005-01-03 / 2005-01-12 ID Label/Location Info / Adobe Acrobat PDF (6 kB)
SAR Report for SB555 attachment 3 of 6
 2004-12-23 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (812 kB)
SAR report 6 - es3dv2-3023 cert
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (2493 kB)
Users Manual
 2004-11-24 / 2005-01-12 Users Manual / Adobe Acrobat PDF (4013 kB)
Internal Photos
 2004-11-24 / 2005-01-12 Internal Photos / Adobe Acrobat PDF (1560 kB)
SAR report 1 - 1900 dip 7/7/04
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (206 kB)
Test Report 2
 2004-11-24 / 2005-01-12 Test Report / Adobe Acrobat PDF (3368 kB)
Correspondence with FCC
 2004-11-24 / 2005-01-12 Cover Letter(s) / Adobe Acrobat PDF (6 kB)
SAR Report 7 - 835 dip cert
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (329 kB)
Compliance Statement Insert for 700C Rev2
 2005-01-05 / 2005-01-12 Users Manual / Adobe Acrobat PDF (152 kB)
SAR Report 2 - 835 dip 7/12/04
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (179 kB)
Test Report 1
 2004-11-24 / 2005-01-12 Test Report / Adobe Acrobat PDF (3940 kB)
Cover letter from agent
 2004-11-24 / 2005-01-12 Cover Letter(s) / Adobe Acrobat PDF (23 kB)
SAR report 1 - 1900 dip 7/7/04
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (206 kB)
SAR Report for SB555 attachment 4 of 6
 2004-12-23 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (843 kB)
SAR Report 7 - 835 dip cert
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (329 kB)
FCC ID Label and location for FCC ID EHAEM3420
 2004-12-23 / 2005-01-12 ID Label/Location Info / Adobe Acrobat PDF (674 kB)
SAR Report 2 - 835 dip 7/12/04
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (179 kB)
Test Report 3
 2004-11-24 / 2005-01-12 Test Report / Adobe Acrobat PDF (1003 kB)
Cover letter for SAR Report explaining colocation configurations
 2005-01-03 / 2005-01-12 Cover Letter(s) / Adobe Acrobat PDF (10 kB)
SAR report 8 - 1900 dip cert
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (343 kB)
SAR report 3 - 7/7/04 device plots
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (3438 kB)
Test Report 2
 2004-11-24 / 2005-01-12 Test Report / Adobe Acrobat PDF (3368 kB)
FCC ID Label
 2004-11-24 / 2005-01-12 ID Label/Location Info / Adobe Acrobat PDF (851 kB)
SAR Report 10 - beltclip spec
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (60 kB)
SAR Report for SB555 attachment 5 of 6
 2004-12-23 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (329 kB)
SAR report 8 - 1900 dip cert
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (343 kB)
Summary List of relevant FCC ID Combination Options
 2004-12-23 / 2005-01-12 ID Label/Location Info / Adobe Acrobat PDF (5 kB)
SAR report 3 - 7/7/04 device plots
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (3438 kB)
Test Report 4
 2004-11-24 / 2005-01-12 Test Report / Adobe Acrobat PDF (1360 kB)
Cover letter from agent
 2004-11-24 / 2005-01-12 Cover Letter(s) / Adobe Acrobat PDF (23 kB)
SAR report 9 - holster spec
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (124 kB)
Agent Authorization letter
 2004-11-24 / 2005-01-12 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
SAR report 4 - 7/12/04 device plots
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (2486 kB)
Test Report 3
 2004-11-24 / 2005-01-12 Test Report / Adobe Acrobat PDF (1003 kB)
Internal Photos
 2004-11-24 / 2005-01-12 Internal Photos / Adobe Acrobat PDF (1560 kB)
SAR report 11 - main w/ EHAEM3420
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (3190 kB)
SAR Report for SB555 attachment 6 of 6
 2004-12-23 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (343 kB)
SAR report 9 - holster spec
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (124 kB)
Cover letter for SAR Report explaining colocation configurations
 2005-01-03 / 2005-01-12 Cover Letter(s) / Adobe Acrobat PDF (10 kB)
SAR Report for SB555 attachment 1 of 6
 2004-12-23 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (326 kB)
SAR report 4 - 7/12/04 device plots
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (2486 kB)
SAR report 11 - main w/ EHAEM3420
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (3190 kB)
FCC ID Label
 2004-11-24 / 2005-01-12 ID Label/Location Info / Adobe Acrobat PDF (851 kB)
Correspondence with FCC
 2004-11-24 / 2005-01-12 Cover Letter(s) / Adobe Acrobat PDF (6 kB)
Compliance Statement Insert
 2005-01-03 / 2005-01-12 Users Manual / Adobe Acrobat PDF (136 kB)
SAR report 5 - es3dv2-3021 cert
 2004-11-24 / 2005-01-12 RF Exposure Info / Adobe Acrobat PDF (843 kB)
Test Report 4
 2004-11-24 / 2005-01-12 Test Report / Adobe Acrobat PDF (1360 kB)

APP # 3 (2004-01-21) Documents

Test Setup Photos
 2004-01-21 / 2004-01-21 Test Setup Photos / Adobe Acrobat PDF (356 kB)
Cover letter from agent
 2004-01-21 / 2004-01-21 Cover Letter(s) / Adobe Acrobat PDF (27 kB)
Cover letter from agent
 2004-01-21 / 2004-01-21 Cover Letter(s) / Adobe Acrobat PDF (27 kB)
User Manual Supplement
 2004-01-21 / 2004-01-21 Users Manual / Adobe Acrobat PDF (30 kB)
Attestation letter from Intermec
 2004-01-21 / 2004-01-21 Attestation Statements / Adobe Acrobat PDF (40 kB)
RF Exposure
 2004-01-21 / 2004-01-21 RF Exposure Info / Adobe Acrobat PDF (52 kB)
Technical Report
 2004-01-21 / 2004-01-21 Test Report / Adobe Acrobat PDF (2057 kB)
Agent authorization letter
 2004-01-21 / 2004-01-21 Cover Letter(s) / Adobe Acrobat PDF (95 kB)
Technical Report
 2004-01-21 / 2004-01-21 Test Report / Adobe Acrobat PDF (2057 kB)
Agent authorization letter
 2004-01-21 / 2004-01-21 Cover Letter(s) / Adobe Acrobat PDF (95 kB)
Compliance Opinion
 2004-01-21 / 2004-01-21 Cover Letter(s) / Adobe Acrobat PDF (66 kB)
Test Setup Photos
 2004-01-21 / 2004-01-21 Test Setup Photos / Adobe Acrobat PDF (356 kB)
Attestation letter from Intermec
 2004-01-21 / 2004-01-21 Attestation Statements / Adobe Acrobat PDF (40 kB)
RF Exposure
 2004-01-21 / 2004-01-21 RF Exposure Info / Adobe Acrobat PDF (52 kB)
User Manual Supplement
 2004-01-21 / 2004-01-21 Users Manual / Adobe Acrobat PDF (30 kB)
Compliance Opinion
 2004-01-21 / 2004-01-21 Cover Letter(s) / Adobe Acrobat PDF (66 kB)

APP # 4 (2005-01-13) Documents

Technical Report
 2005-01-13 / 2005-01-13 Test Report / Adobe Acrobat PDF (2417 kB)
Users Manual
 2005-01-13 / 2005-01-13 Users Manual / Adobe Acrobat PDF (405 kB)
External Photos
 2005-01-13 / 2005-01-13 External Photos / Adobe Acrobat PDF (807 kB)
RF Exposure
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (43 kB)
Agent Authorization Letter
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
FCC ID Label and Location
 2005-01-13 / 2005-01-13 ID Label/Location Info / Adobe Acrobat PDF (129 kB)
Test Setup Photos
 2005-01-13 / 2005-01-13 Test Setup Photos / Adobe Acrobat PDF (399 kB)
Cover letter from agent
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (23 kB)
RF Exposure
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (43 kB)
Agent Authorization Letter
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
Users Manual
 2005-01-13 / 2005-01-13 Users Manual / Adobe Acrobat PDF (405 kB)
External Photos
 2005-01-13 / 2005-01-13 External Photos / Adobe Acrobat PDF (807 kB)
Technical Report
 2005-01-13 / 2005-01-13 Test Report / Adobe Acrobat PDF (2417 kB)
Compliance Opinion
 2005-01-17 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (19 kB)
Compliance Opinion
 2005-01-17 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (19 kB)
FCC ID Label and Location
 2005-01-13 / 2005-01-13 ID Label/Location Info / Adobe Acrobat PDF (129 kB)
Test Setup Photos
 2005-01-13 / 2005-01-13 Test Setup Photos / Adobe Acrobat PDF (399 kB)
Cover letter from agent
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (23 kB)

APP # 5 (2005-01-13) Documents

Operational Description
 2005-01-13 / N/A Operational Description / Adobe Acrobat PDF (689 kB)
Antenna Info
 2005-01-13 / 2005-01-13 Operational Description / Adobe Acrobat PDF (44 kB)
Compliance Insert 1
 2005-01-18 / 2005-01-13 Users Manual / Adobe Acrobat PDF (80 kB)
Cover letter
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (38 kB)
Technical Report
 2005-01-13 / 2005-01-13 Test Report / Adobe Acrobat PDF (1900 kB)
SAR Report 5
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (342 kB)
Internal Photos
 2005-01-13 / 2005-01-13 Internal Photos / Adobe Acrobat PDF (931 kB)
Antenna Info
 2005-01-13 / 2005-01-13 Operational Description / Adobe Acrobat PDF (44 kB)
SAR Report 5
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (342 kB)
Request for Confidentiality
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (53 kB)
Attestation letter regarding Channels
 2005-01-13 / 2005-01-13 Attestation Statements / Adobe Acrobat PDF (40 kB)
Compliance Insert 2
 2005-01-18 / 2005-01-13 Users Manual / Adobe Acrobat PDF (80 kB)
External Photos
 2005-01-13 / 2005-01-13 External Photos / Adobe Acrobat PDF (1269 kB)
Test Setup Photos
 2005-01-13 / 2005-01-13 Test Setup Photos / Adobe Acrobat PDF (3406 kB)
SAR Report 6
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (430 kB)
SAR Report 6
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (430 kB)
Technical Report
 2005-01-13 / 2005-01-13 Test Report / Adobe Acrobat PDF (1900 kB)
Attestation letter regarding Channels
 2005-01-13 / 2005-01-13 Attestation Statements / Adobe Acrobat PDF (40 kB)
SAR Report Final Version
 2005-01-18 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (1305 kB)
SAR Report 1
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (155 kB)
Cover letter
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (38 kB)
FCC ID Label and Location
 2005-01-13 / 2005-01-13 ID Label/Location Info / Adobe Acrobat PDF (49 kB)
Users Manual 1
 2005-01-13 / 2005-01-13 Users Manual / Adobe Acrobat PDF (47 kB)
SAR Report 7
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (466 kB)
SAR Report 7
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (466 kB)
Request for Confidentiality
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (53 kB)
Compliance Insert 1
 2005-01-18 / 2005-01-13 Users Manual / Adobe Acrobat PDF (80 kB)
SAR Report 2
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (1305 kB)
External Photos
 2005-01-13 / 2005-01-13 External Photos / Adobe Acrobat PDF (1269 kB)
Frequency Block Diagram
 2005-01-13 / N/A Block Diagram / Adobe Acrobat PDF (59 kB)
Users Manual 2
 2005-01-13 / 2005-01-13 Users Manual / Adobe Acrobat PDF (2003 kB)
Users Manual 1
 2005-01-13 / 2005-01-13 Users Manual / Adobe Acrobat PDF (47 kB)
SAR Report Final Version
 2005-01-18 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (1305 kB)
Test Setup Photos
 2005-01-13 / 2005-01-13 Test Setup Photos / Adobe Acrobat PDF (3406 kB)
Compliance Insert 2
 2005-01-18 / 2005-01-13 Users Manual / Adobe Acrobat PDF (80 kB)
SAR Report 3
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (1305 kB)
FCC ID Label and Location
 2005-01-13 / 2005-01-13 ID Label/Location Info / Adobe Acrobat PDF (49 kB)
Internal Photos
 2005-01-13 / 2005-01-13 Internal Photos / Adobe Acrobat PDF (931 kB)
Agent Authorization Letter
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
Users Manual 2
 2005-01-13 / 2005-01-13 Users Manual / Adobe Acrobat PDF (2003 kB)
Compliance Opinion
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (18 kB)
Schematics
 2005-01-13 / N/A Schematics / Adobe Acrobat PDF (633 kB)
SAR Report 1
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (155 kB)
Compliance Opinion
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (18 kB)
Agent Authorization Letter
 2005-01-13 / 2005-01-13 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
SAR Report 4
 2005-01-13 / 2005-01-13 RF Exposure Info / Adobe Acrobat PDF (1305 kB)

APP # 6 (2004-05-26) Documents

Compliance Opinion
 2004-05-26 / 2004-05-26 Cover Letter(s) / Adobe Acrobat PDF (63 kB)
Cover letter from client
 2004-05-26 / 2004-05-26 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
Attestation Letter from Applicant Jan 13 2005
 2005-01-13 / 2004-05-26 Attestation Statements / Adobe Acrobat PDF (44 kB)
Attestation Letter from Applicant Jan 13 2005
 2005-01-13 / 2004-05-26 Attestation Statements / Adobe Acrobat PDF (44 kB)
Compliance Opinion
 2004-05-26 / 2004-05-26 Cover Letter(s) / Adobe Acrobat PDF (63 kB)
Cover letter from client
 2004-05-26 / 2004-05-26 Cover Letter(s) / Adobe Acrobat PDF (45 kB)

APP # 7 (2004-01-20) Documents

Reference to Test Report
 2003-12-15 / 2004-01-20 Test Setup Photos / Microsoft Word (32 kB)
700C Host letter
 2003-12-15 / 2004-01-20 jpeg / JPEG Image (127 kB)
Change Request
 2003-12-15 / 2004-01-20 Cover Letter(s) / Adobe Acrobat PDF (373 kB)
Supporting letter
 2003-12-15 / 2004-01-20 Cover Letter(s) / Adobe Acrobat PDF (154 kB)
Spurious Results
 2003-12-15 / 2004-01-20 jpeg / JPEG Image (164 kB)
Report Heirarchy
 2003-12-15 / 2004-01-20 Cover Letter(s) / Microsoft Word (46 kB)
InterMec Report
 2003-12-15 / 2004-01-20 RF Exposure Info / Adobe Acrobat PDF (3836 kB)
Report Heirarchy
 2003-12-15 / 2004-01-20 Cover Letter(s) / Microsoft Word (46 kB)
Reference to Test Report
 2003-12-15 / 2004-01-20 Test Setup Photos / Microsoft Word (32 kB)
Spurious Results
 2003-12-15 / 2004-01-20 Test Report / JPEG Image (164 kB)
Leter
 2003-12-15 / 2004-01-20 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
Leter
 2003-12-15 / 2004-01-20 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
InterMec Report
 2003-12-15 / 2004-01-20 RF Exposure Info / Adobe Acrobat PDF (3836 kB)
Supporting letter
 2003-12-15 / 2004-01-20 Cover Letter(s) / Adobe Acrobat PDF (154 kB)
Agents Letter
 2003-12-15 / 2004-01-20 Cover Letter(s) / Microsoft Word (70 kB)
Merger Letter
 2003-12-15 / 2004-01-20 Cover Letter(s) / Microsoft Word (957 kB)
700C Host letter
 2003-12-15 / 2004-01-20 Cover Letter(s) / JPEG Image (127 kB)
Module Report
 2003-12-15 / 2004-01-20 RF Exposure Info / Adobe Acrobat PDF (2218 kB)
Test Report
 2003-12-15 / 2004-01-20 Test Report / Adobe Acrobat PDF (1581 kB)
Module Report
 2003-12-15 / 2004-01-20 RF Exposure Info / Adobe Acrobat PDF (2218 kB)
Merger Letter
 2003-12-15 / 2004-01-20 Cover Letter(s) / Microsoft Word (957 kB)
Agents Letter
 2003-12-15 / 2004-01-20 Cover Letter(s) / Microsoft Word (70 kB)
Change Request
 2003-12-15 / 2004-01-20 Cover Letter(s) / Adobe Acrobat PDF (373 kB)
Test Report
 2003-12-15 / 2004-01-20 Test Report / Adobe Acrobat PDF (1581 kB)

APP # 8 (2003-07-29) Documents

Cover Letter from Agent
 2003-03-16 / 2003-07-29 Cover Letter(s) / Adobe Acrobat PDF (229 kB)
User Manual Part 2 of 2
 2003-03-16 / 2003-07-29 Users Manual / Adobe Acrobat PDF (1458 kB)
CDMA SAR Report Part 1 of 3
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (2607 kB)
Attestation Letter from Radio Manufacturer
 2003-07-07 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (34 kB)
Technical Report Part 2 of 4
 2003-03-16 / 2003-07-29 Test Report / Adobe Acrobat PDF (484 kB)
Technical Report Part 4 of 4
 2003-03-16 / 2003-07-29 Test Report / Adobe Acrobat PDF (1160 kB)
Additional Labels 2 of 4
 2003-07-07 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (261 kB)
Internal Photos
 2003-03-16 / 2003-07-29 Internal Photos / Adobe Acrobat PDF (1957 kB)
Index of Exhibits
 2003-03-16 / 2003-07-29 Cover Letter(s) / Adobe Acrobat PDF (44 kB)
Agent Authorization Letter
 2003-03-16 / 2003-07-29 Cover Letter(s) / Adobe Acrobat PDF (109 kB)
Operational Description
 2003-03-16 / N/A Operational Description / Adobe Acrobat PDF (707 kB)
802 11b SAR Report
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (2240 kB)
External Photos
 2003-03-16 / 2003-07-29 External Photos / Adobe Acrobat PDF (2349 kB)
Agent Authorization Letter
 2003-03-16 / 2003-07-29 Cover Letter(s) / Adobe Acrobat PDF (109 kB)
CDMA SAR Report Part 2 of 3
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (2840 kB)
Bluetooth SAR Report - external test setup not applicable
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (1468 kB)
Technical Report Part 3 of 4
 2003-03-16 / 2003-07-29 Test Report / Adobe Acrobat PDF (3500 kB)
User Manual Part 1 of 2
 2003-03-16 / 2003-07-29 Users Manual / Adobe Acrobat PDF (2886 kB)
Additional Labels 3 of 4
 2003-07-07 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (265 kB)
Request for Confidentiality Letter
 2003-03-16 / 2003-07-29 Cover Letter(s) / Adobe Acrobat PDF (69 kB)
Antenna Description
 2003-03-16 / 2003-07-29 Parts List/Tune Up Info / Adobe Acrobat PDF (39 kB)
Attestation from Applicant
 2003-07-07 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (73 kB)
Antenna Description
 2003-03-16 / 2003-07-29 Parts List/Tune Up Info / Adobe Acrobat PDF (39 kB)
CDMA SAR Report Part 3 of 3
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (2651 kB)
Additional Labels 1 of 4
 2003-07-07 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (256 kB)
FCC ID Label and Location
 2003-03-16 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (1970 kB)
Cover Letter from Agent
 2003-03-16 / 2003-07-29 Cover Letter(s) / Adobe Acrobat PDF (229 kB)
CDMA SAR Report Part 1 of 3
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (2607 kB)
Technical Report Part 4 of 4
 2003-03-16 / 2003-07-29 Test Report / Adobe Acrobat PDF (1160 kB)
User Manual Part 2 of 2
 2003-03-16 / 2003-07-29 Users Manual / Adobe Acrobat PDF (1458 kB)
Additional Labels 4 of 4
 2003-07-07 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (256 kB)
SAR Test Report Cover Letters
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (56 kB)
Technical Report Part 1 of 4
 2003-03-16 / 2003-07-29 Test Report / Adobe Acrobat PDF (555 kB)
Attestation from SAR Test Lab
 2003-07-07 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (25 kB)
Applicant Attestation Letter
 2003-03-16 / 2003-07-29 Attestation Statements / Adobe Acrobat PDF (140 kB)
802 11b SAR Report
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (2240 kB)
Additional Labels 2 of 4
 2003-07-07 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (261 kB)
Frequency Block Diagram
 2003-03-16 / N/A Block Diagram / Adobe Acrobat PDF (88 kB)
Request for Confidentiality Letter
 2003-03-16 / 2003-07-29 Cover Letter(s) / Adobe Acrobat PDF (69 kB)
CDMA SAR Report Part 2 of 3
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (2840 kB)
Test Setup Photos
 2003-03-16 / 2003-07-29 Test Setup Photos / Adobe Acrobat PDF (1999 kB)
Test Setup Photos
 2003-03-16 / 2003-07-29 Test Setup Photos / Adobe Acrobat PDF (1999 kB)
Schematics
 2003-03-16 / N/A Schematics / Adobe Acrobat PDF (650 kB)
Technical Report Part 2 of 4
 2003-03-16 / 2003-07-29 Test Report / Adobe Acrobat PDF (484 kB)
Attestation Letter from Radio Manufacturer
 2003-07-07 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (34 kB)
Attestation from Applicant
 2003-07-07 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (73 kB)
Bluetooth SAR Report - external test setup not applicable
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (1468 kB)
Additional Labels 3 of 4
 2003-07-07 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (265 kB)
Index of Exhibits
 2003-03-16 / 2003-07-29 Cover Letter(s) / Adobe Acrobat PDF (44 kB)
FCC ID Label and Location
 2003-03-16 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (1970 kB)
CDMA SAR Report Part 3 of 3
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (2651 kB)
User Manual Part 1 of 2
 2003-03-16 / 2003-07-29 Users Manual / Adobe Acrobat PDF (2886 kB)
SAR Test Report Cover Letters
 2003-03-16 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (56 kB)
Attestation from SAR Test Lab
 2003-07-07 / 2003-07-29 RF Exposure Info / Adobe Acrobat PDF (25 kB)
Technical Report Part 1 of 4
 2003-03-16 / 2003-07-29 Test Report / Adobe Acrobat PDF (555 kB)
Technical Report Part 3 of 4
 2003-03-16 / 2003-07-29 Test Report / Adobe Acrobat PDF (3500 kB)
Additional Labels 1 of 4
 2003-07-07 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (256 kB)
External Photos
 2003-03-16 / 2003-07-29 External Photos / Adobe Acrobat PDF (2349 kB)
Applicant Attestation Letter
 2003-03-16 / 2003-07-29 Attestation Statements / Adobe Acrobat PDF (140 kB)
Additional Labels 4 of 4
 2003-07-07 / 2003-07-29 ID Label/Location Info / Adobe Acrobat PDF (256 kB)
Internal Photos
 2003-03-16 / 2003-07-29 Internal Photos / Adobe Acrobat PDF (1957 kB)

Correspondence

All Correspondence

App # Document Date
1 Incoming Correspondence generated [Dec 23 2004]
1 [Re-Sent]E-Mail generated [Jan 4 2005]
1 [Re-Sent]E-Mail generated [Dec 30 2004]
1 Incoming Correspondence generated [Dec 23 2004]
1    Incoming Correspondence generated [Jan 5 2005]
1 Incoming Correspondence generated [Jan 3 2005]
1 Incoming Correspondence generated [Dec 23 2004]
1    Incoming Correspondence generated [Jan 5 2005]
1 [Re-Sent]E-Mail generated [Dec 23 2004]
1 Incoming Correspondence generated [Jan 3 2005]
1 Incoming Correspondence generated [Dec 23 2004]
1    Incoming Correspondence generated [Jan 5 2005]
1 Incoming Correspondence generated [Dec 23 2004]
1 Incoming Correspondence generated [Jan 3 2005]
1 Incoming Correspondence generated [Dec 23 2004]
1 Incoming Correspondence generated [Dec 23 2004]
1 Incoming Correspondence generated [Jan 3 2005]
1 Incoming Correspondence generated [Dec 23 2004]
1 Incoming Correspondence generated [Dec 23 2004]
1 Incoming Correspondence generated [Jan 3 2005]
1 Incoming Correspondence generated [Dec 23 2004]
2 [Re-Sent]RT Email Correspondence generated [Jan 12 2005]
2    Incoming Correspondence generated [Jan 13 2005]
2    Incoming Correspondence generated [Jan 13 2005]
3 E-Mail generated [Jul 29 2003] 2003-07-29 07:26:41
fcc
3 E-Mail generated [Mar 28 2003] 2003-03-28 16:58:46
fcc
3 Confidential letter to applicant generated [Jul 29 2003] 2003-07-29 07:32:42
fcc
3 E-Mail generated [May 8 2003] 2003-05-08 11:04:27
fcc
3 [Re-Sent]E-Mail generated [May 8 2003] 2003-05-08 11:15:31
fcc
3 Incoming Correspondence generated [Jul 7 2003] 2003-07-07 13:05:24
fcc
3    Incoming Correspondence generated [Jul 7 2003] 2003-07-07 14:19:46
fcc
3    Incoming Correspondence generated [Jul 7 2003] 2003-07-07 15:00:32
fcc

APP # 3 (2004-01-21)

App # Document Type
3 E-Mail generated [Jul 29 2003] 2003-07-29 07:26:41
fcc
3 E-Mail generated [Mar 28 2003] 2003-03-28 16:58:46
fcc
3 Confidential letter to applicant generated [Jul 29 2003] 2003-07-29 07:32:42
fcc
3 E-Mail generated [May 8 2003] 2003-05-08 11:04:27
fcc
3 [Re-Sent]E-Mail generated [May 8 2003] 2003-05-08 11:15:31
fcc
3 Incoming Correspondence generated [Jul 7 2003] 2003-07-07 13:05:24
fcc
3    Incoming Correspondence generated [Jul 7 2003] 2003-07-07 14:19:46
fcc
3    Incoming Correspondence generated [Jul 7 2003] 2003-07-07 15:00:32
fcc

Grants

TCB Grant from App #1 (2004-07-07)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 07/07/2004

Application Dated: 07/07/2004
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C and 751G
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant from App #1 (2004-07-07)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States
  Date of Grant: 07/07/2004

Application Dated: 07/07/2004
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C and 751G
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To:


EA344842

TCB Grant from App #2 (2005-01-12)

EAS Grant from App #2 (2005-01-12)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States
  Date of Grant: 01/12/2005

Application Dated: 11/24/2004
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C and 751G
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: EHABTS080 and FCC ID: EHAEM3420 (this filing) and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermec's Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.



Mail To:


EA597235

TCB Grant from App #3 (2004-01-21)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 01/21/2004

Application Dated: 01/21/2004
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant from App #3 (2004-01-21)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States
  Date of Grant: 01/21/2004

Application Dated: 01/21/2004
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To:


EA616637

TCB Grant from App #4 (2005-01-13)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 01/13/2005

Application Dated: 01/13/2005
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C and 751G
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID:EHABTS080 and FCC ID: EHAEM3420 and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the users body. Endusers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

EAS Grant from App #4 (2005-01-13)

Details of this Equipment Authorization System grant are unavailable

TCB Grant from App #5 (2005-01-13)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 01/13/2005

Application Dated: 01/13/2005
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C, 751G, and CN2NI/CN2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID:EHABTS080 and FCC ID: EHAEM3420 and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the users body. Endusers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter may also be operated in the grantees Model CN2NI/CN2 handheld scanner. When installed in the Model CN2NI/CN2, this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SAR compliance for body-worn operating configurations is limited to the specific configuration tested for this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values when installed in the Model CN2NI/CN2 are: Part 15 body-worn 0.82 W/kg

EAS Grant from App #5 (2005-01-13)

Details of this Equipment Authorization System grant are unavailable

TCB Grant from App #6 (2004-05-26)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 05/26/2004

Application Dated: 05/26/2004
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C and 751G
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant from App #6 (2004-05-26)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States
  Date of Grant: 05/26/2004

Application Dated: 05/26/2004
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C and 751G
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To:


EA592431

TCB Grant from App #7 (2004-01-20)

EAS Grant from App #7 (2004-01-20)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States
  Date of Grant: 01/20/2004

Application Dated: 12/15/2003
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional Bluetooth FCC ID: HN2ABTM3-3, and optional Part 22/24 transmitters FCC ID: HN2SB555-2 or FCC ID: EHA700C-SMC45-1 have been evaluated as described in this and previous filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when colocated with a Part 22/24 transmitter, and with specific second external antenna when not colocated with a Part 22/24 transmitter. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To:


EA818931

TCB Grant from App #8 (2003-07-29)

EAS Grant from App #8 (2003-07-29)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States
  Date of Grant: 07/29/2003

Application Dated: 03/16/2003
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN22011B-2
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 2011B Radio in 700C
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.089  

Output is conducted. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when colocated with HN2SB555-2, and with specific second external antenna when not colocated with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To:


EA496964

Applications for this FCC ID

Form App # 1 (2004-07-07)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Intermec Technologies Corporation
FCC Registration Number (FRN): 0003729654
Alphanumeric FCC ID: HN22011B2
Unique Application Identifier: cl7S7szmab7609srszkDIA==
Line one: 9680 Old Bailes Rd.
City: Fort Mill
State: South Carolina
Country: United States
Zip Code: 29707

TCB Information
TCB Application Email Address: gkiemel@nwemc.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: HN2
Product Code: 2011B-2

Person at the applicant's address to receive grant or for contact
Name: Brian Rudick
Title: VP & GC, Honeywell Scanning & Mobility
Telephone Number: 803-835-8769 Extension:
Fax Number: 803-835-8700
Email: brian.rudick@honeywell.com

Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Greg
Last Name: Kiemel
Line 1: 22975 NW Evergreen Parkway
Line 2:
Suite 400
City: Hillsboro
State: Oregon
Country:
United States
Zip Code: 97124
Telephone Number:
503-844-4066

Extension:
Fax Number: 503-844-3826
E-Mail:

Non Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Vicki
Last Name: Albertson
Line 1: 22975 NW Evergreen Parkway
Line 2: Suite 400
City: Hillsboro
State: Oregon
Country: United States
Zip Code: 97124
Telephone Number: 503-844-4066 Extension:
Fax Number: 503-844-3826
E-Mail: valbertson@nwemc.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2011B Radio in 700C and 751G

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Northwest EMC, Inc.
First Name:   Greg
Last Name:   Kiemel
Telephone Number: 503-844-4066 Extension:
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Gregory V. Kiemel
Title of authorized signature:  Director of Engineering

Complete items below if agent signs the application:

Firm Name:  Northwest EMC, Inc.
Name:  Greg Greg Greg
Line 1:  Greg
Line 2:  Greg
P.O. Box:  Greg
City:  Greg
State:  Greg
Country:  Greg
Zip Code:  Greg
Telephone Number:  503-844-4066
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Form App # 2 (2005-01-12)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Intermec Technologies Corporation
FCC Registration Number (FRN): 0003729654
Alphanumeric FCC ID: HN22011B2
Unique Application Identifier: EcDs7nqK+PjNsKEav3t32w==
Line one: 9680 Old Bailes Rd.
City: Fort Mill
State: South Carolina
Country: United States
Zip Code: 29707

TCB Information

FCC ID
Grantee Code: HN2
Product Code: 2011B-2

Person at the applicant's address to receive grant or for contact
Name: Brian Rudick
Title: VP & GC, Honeywell Scanning & Mobility
Telephone Number: 803-835-8769 Extension:
Fax Number: 803-835-8700
Email: brian.rudick@honeywell.com

Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Greg
Last Name: Kiemel
Line 1: 22975 NW Evergreen Parkway
Line 2:
Suite 400
City: Hillsboro
State: Oregon
Country:
United States
Zip Code: 97124
Telephone Number:
503-844-4066

Extension:
Fax Number: 503-844-3826
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2011B Radio in 700C and 751G

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Northwest EMC, Inc.
First Name:   Greg
Last Name:   Kiemel
Telephone Number: 503-844-4066 Extension:
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: EHABTS080 and FCC ID: EHAEM3420 (this filing) and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermec's Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Gregory V. Kiemel
Title of authorized signature:  Director of Engineering

Complete items below if agent signs the application:

Firm Name:  Northwest EMC, Inc.
Name:  Greg Greg Greg
Line 1:  Greg
Line 2:  Greg
P.O. Box:  Greg
City:  Greg
State:  Greg
Country:  Greg
Zip Code:  Greg
Telephone Number:  503-844-4066
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Form App # 3 (2004-01-21)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Intermec Technologies Corporation
FCC Registration Number (FRN): 0003729654
Alphanumeric FCC ID: HN22011B2
Unique Application Identifier: FS1Z21jjrjHMA3E2/t1Awg==
Line one: 9680 Old Bailes Rd.
City: Fort Mill
State: South Carolina
Country: United States
Zip Code: 29707

TCB Information
TCB Application Email Address: gkiemel@nwemc.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: HN2
Product Code: 2011B-2

Person at the applicant's address to receive grant or for contact
Name: Brian Rudick
Title: VP & GC, Honeywell Scanning & Mobility
Telephone Number: 803-835-8769 Extension:
Fax Number: 803-835-8700
Email: brian.rudick@honeywell.com

Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Greg
Last Name: Kiemel
Line 1: 22975 NW Evergreen Parkway
Line 2:
Suite 400
City: Hillsboro
State: Oregon
Country:
United States
Zip Code: 97124
Telephone Number:
503-844-4066

Extension:
Fax Number: 503-844-3826
E-Mail:

Non Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Vicki
Last Name: Albertson
Line 1: 22975 NW Evergreen Parkway
Line 2: Suite 400
City: Hillsboro
State: Oregon
Country: United States
Zip Code: 97124
Telephone Number: 503-844-4066 Extension:
Fax Number: 503-844-3826
E-Mail: valbertson@nwemc.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2011B Radio in 700C

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Northwest EMC, Inc.
First Name:   Greg
Last Name:   Kiemel
Telephone Number: 503-844-4066 Extension:
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output is conducted. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Gregory V. Kiemel
Title of authorized signature:  Director of Engineering

Complete items below if agent signs the application:

Firm Name:  Northwest EMC, Inc.
Name:  Greg Greg Greg
Line 1:  Greg
Line 2:  Greg
P.O. Box:  Greg
City:  Greg
State:  Greg
Country:  Greg
Zip Code:  Greg
Telephone Number:  503-844-4066
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Form App # 4 (2005-01-13)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Intermec Technologies Corporation
FCC Registration Number (FRN): 0003729654
Alphanumeric FCC ID: HN22011B2
Unique Application Identifier: IJIseGTciZ8Wj+dfS8Yogg==
Line one: 9680 Old Bailes Rd.
City: Fort Mill
State: South Carolina
Country: United States
Zip Code: 29707

TCB Information
TCB Application Email Address: dghizzone@nwemc.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: HN2
Product Code: 2011B-2

Person at the applicant's address to receive grant or for contact
Name: Brian Rudick
Title: VP & GC, Honeywell Scanning & Mobility
Telephone Number: 803-835-8769 Extension:
Fax Number: 803-835-8700
Email: brian.rudick@honeywell.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2011B Radio in 700C and 751G

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Northwest EMC, Inc.
First Name:   Greg
Last Name:   Kiemel
Telephone Number: 503-844-4066 Extension:
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID:EHABTS080 and FCC ID: EHAEM3420 and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the users body. Endusers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Scott Holub
Title of authorized signature:  Intermec - Compliance Engineer

Form App # 5 (2005-01-13)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Intermec Technologies Corporation
FCC Registration Number (FRN): 0003729654
Alphanumeric FCC ID: HN22011B2
Unique Application Identifier: iQloexlAegbXckN/YHYmBg==
Line one: 9680 Old Bailes Rd.
City: Fort Mill
State: South Carolina
Country: United States
Zip Code: 29707

TCB Information
TCB Application Email Address: dghizzone@nwemc.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: HN2
Product Code: 2011B-2

Person at the applicant's address to receive grant or for contact
Name: Brian Rudick
Title: VP & GC, Honeywell Scanning & Mobility
Telephone Number: 803-835-8769 Extension:
Fax Number: 803-835-8700
Email: brian.rudick@honeywell.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2011B Radio in 700C, 751G, and CN2NI/CN2

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Northwest EMC, Inc.
First Name:   Greg
Last Name:   Kiemel
Telephone Number: 503-844-4066 Extension:
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID:EHABTS080 and FCC ID: EHAEM3420 and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the users body. Endusers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter may also be operated in the grantees Model CN2NI/CN2 handheld scanner. When installed in the Model CN2NI/CN2, this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SAR compliance for body-worn operating configurations is limited to the specific configuration tested for this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values when installed in the Model CN2NI/CN2 are: Part 15 body-worn 0.82 W/kg
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Katie Molina
Title of authorized signature:  Intermec Compliance Engineer

Form App # 6 (2004-05-26)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Intermec Technologies Corporation
FCC Registration Number (FRN): 0003729654
Alphanumeric FCC ID: HN22011B2
Unique Application Identifier: r6+YhH3CASWRi2o5cZacmA==
Line one: 9680 Old Bailes Rd.
City: Fort Mill
State: South Carolina
Country: United States
Zip Code: 29707

TCB Information
TCB Application Email Address: gkiemel@nwemc.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: HN2
Product Code: 2011B-2

Person at the applicant's address to receive grant or for contact
Name: Brian Rudick
Title: VP & GC, Honeywell Scanning & Mobility
Telephone Number: 803-835-8769 Extension:
Fax Number: 803-835-8700
Email: brian.rudick@honeywell.com

Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Greg
Last Name: Kiemel
Line 1: 22975 NW Evergreen Parkway
Line 2:
Suite 400
City: Hillsboro
State: Oregon
Country:
United States
Zip Code: 97124
Telephone Number:
503-844-4066

Extension:
Fax Number: 503-844-3826
E-Mail:

Non Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Vicki
Last Name: Albertson
Line 1: 22975 NW Evergreen Parkway
Line 2: Suite 400
City: Hillsboro
State: Oregon
Country: United States
Zip Code: 97124
Telephone Number: 503-844-4066 Extension:
Fax Number: 503-844-3826
E-Mail: valbertson@nwemc.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2011B Radio in 700C and 751G

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Northwest EMC, Inc.
First Name:   Greg
Last Name:   Kiemel
Telephone Number: 503-844-4066 Extension:
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Scott Holub
Title of authorized signature:  Regulatory Compliance Engineer

Form App # 7 (2004-01-20)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Intermec Technologies Corporation
FCC Registration Number (FRN): 0003729654
Alphanumeric FCC ID: HN22011B2
Unique Application Identifier: WrLhKvylZf0c41HU6i7pkw==
Line one: 9680 Old Bailes Rd.
City: Fort Mill
State: South Carolina
Country: United States
Zip Code: 29707

TCB Information

FCC ID
Grantee Code: HN2
Product Code: 2011B-2

Person at the applicant's address to receive grant or for contact
Name: Brian Rudick
Title: VP & GC, Honeywell Scanning & Mobility
Telephone Number: 803-835-8769 Extension:
Fax Number: 803-835-8700
Email: brian.rudick@honeywell.com

Technical Contact
Firm Name: Intermec Technologies Corporation
First Name: Scott
Middle Name: J
Last Name: Holub
Line 1: 550 Second Street SE
City: Cedar Rapids
State: Iowa
Country:
United States
Zip Code: 52401
Telephone Number:
319 369 3865

Extension:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2011B Radio in 700C

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   TUV SUD Product Service
First Name:   Jensen
Last Name:   Adams
Telephone Number: 44-1489-558252 Extension:
Fax Number:  44-11489-558101
E-mail:  jensen.adams@tuv-sud.co.uk

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output is conducted. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional Bluetooth FCC ID: HN2ABTM3-3, and optional Part 22/24 transmitters FCC ID: HN2SB555-2 or FCC ID: EHA700C-SMC45-1 have been evaluated as described in this and previous filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when colocated with a Part 22/24 transmitter, and with specific second external antenna when not colocated with a Part 22/24 transmitter. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Hilton Carr
Title of authorized signature:  Task Manager

Complete items below if agent signs the application:

Firm Name:  BABT
Name:  Hilton Hilton Hilton
Line 1:  Hilton
Line 2:  Hilton
P.O. Box:  Hilton
City:  Hilton
State:  Hilton
Country:  Hilton
Zip Code:  Hilton
Telephone Number:  +44 1932 251227
E-mail:  Hilton.Carr@BABT.com

Form App # 8 (2003-07-29)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Intermec Technologies Corporation
FCC Registration Number (FRN): 0003729654
Alphanumeric FCC ID: HN22011B2
Unique Application Identifier: XbKeiPMnR3GsWhbKQJ5g2Q==
Line one: 9680 Old Bailes Rd.
City: Fort Mill
State: South Carolina
Country: United States
Zip Code: 29707

TCB Information

FCC ID
Grantee Code: HN2
Product Code: 2011B-2

Person at the applicant's address to receive grant or for contact
Name: Brian Rudick
Title: VP & GC, Honeywell Scanning & Mobility
Telephone Number: 803-835-8769 Extension:
Fax Number: 803-835-8700
Email: brian.rudick@honeywell.com

Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Greg
Last Name: Kiemel
Line 1: 22975 NW Evergreen Parkway
Line 2:
Suite 400
City: Hillsboro
State: Oregon
Country:
United States
Zip Code: 97124
Telephone Number:
5038444066

Extension:
Fax Number: 5038443826
E-Mail:

Non Technical Contact
Firm Name: Northwest EMC, Inc.
First Name: Kim
Last Name: Valleen
Line 1: 22975 NW Evergreen Parkway
Line 2: Suite 400
City: Hillsboro
State: Oregon
Country: United States
Zip Code: 97124
Telephone Number: 5038444066 Extension:
Fax Number: 5038443826
E-Mail: kvalleen@nwemc.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2011B Radio in 700C

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Northwest EMC, Inc.
First Name:   Greg
Last Name:   Kiemel
Telephone Number: 503-844-4066 Extension:
Fax Number:  503-844-3826
E-mail:  gkiemel@nwemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output is conducted. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when colocated with HN2SB555-2, and with specific second external antenna when not colocated with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Gregory V. Kiemel
Title of authorized signature:  Director of Engineering

Complete items below if agent signs the application:

Firm Name:  Northwest EMC, Inc.
Name:  Greg Greg Greg
Line 1:  Greg
Line 2:  Greg
P.O. Box:  Greg
City:  Greg
State:  Greg
Country:  Greg
Zip Code:  Greg
Telephone Number:  5038444066
Fax Number:  5038443826
E-mail:  gkiemel@nwemc.com

Applications are submitted for FCC ID and Grant requests. Click an above application to view details


© FCCID.io 2025