FCC ID N6C-SXPCEAN

N6CSXPCEAN, N6C SXPCEAN, N6C-SXPCEAN

Silex Technology, Inc. Wireless LAN PCI Express Mini Card Module

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: N6C-SXPCEAN is . The remaining characters of the FCC ID, -SXPCEAN, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Silex Technology, Inc.

Full Company Details: Silex Technology, Inc. - N6C
Company Code: N6C
Address:
   Silex Technology, Inc.
   2-3-1 Hikaridai,Seika-cho Sourakugun
   Kyoto, N/A 619-0237
   Japan
App # Purpose Date Unique ID
1 Class II Permissive Change 2013-06-03 /BEOG8t/fS0TiXY78+TONQ==
2 Class II Permissive Change 2013-06-03 C4NByq2PBLoueTDZh+LzrA==
3 Class II Permissive Change 2014-06-27 ex7VSTvMM36KZI0HAJ/Zpw==
4 Class II Permissive Change 2016-11-03 FvXVI5Q2wgf51I5+mwSGBA==
5 Class II Permissive Change 2014-08-04 lTcsSRrBTPIuR6hLxGokqw==
6 Original Equipment 2012-12-14 mcALDYEnzw3wQB/hCkgGpQ==
7 Class II Permissive Change 2014-06-30 mfayCVEOdOLxLipug48w4A==
8 Class II Permissive Change 2017-03-17 Reak9m2TF/Jx7lalaHJoyA==
9 Class II Permissive Change 2014-08-04 UWVk46Y3R6xZK8pGYneLTA==
10 Class II Permissive Change 2014-06-27 YN+DW5XdF5Hp5ltswVq7zw==
11 Original Equipment 2012-12-14 YRPX3enT3gFG8mJCfJsLhA==

Approved Operating Frequencies

App # Frequency RangePower OutputRule PartsGrant Notes
1.15180.00000000-5320.000000000.026600015ECC, MO, ND
2.12412-24620.551615CCC, MO
2.25745-58250.345615CCC, MO
3.12412-24620.551615CCC, MO
3.25745-58250.345615CCC, MO
4.15180-53200.026615E38, CC, MO, ND
4.25745-58250.03515E38, CC, MO
5.12412-24620.551615CCC, MO
5.25745-58250.345615CCC, MO
6.15180.00000000-5320.000000000.026600015EMO
7.15745.00000000-5825.000000000.345600015C36, CC
8.15180-53200.026615E38, CC, MO, ND
8.25500-57000.042915E38, CC, MO, ND
8.35745-58250.03515E38, CC, MO
9.15180.00000000-5320.000000000.026600015ECC, MO, ND
10.15180.00000000-5320.000000000.026600015ECC, MO, ND
11.12412-24620.551615CCC
11.25745-58250.345615CCC

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 FCC Class II Permissive Change LetterCover Letter(s) / Adobe Acrobat PDF (37 kB) 2013-06-03 / 2013-06-03
1 FCC test setup photo (15.407)Test Setup Photos / Adobe Acrobat PDF (535 kB) 2013-06-03 / 2013-06-03
1 FCC Declaration Letter of professional installCover Letter(s) / Adobe Acrobat PDF (25 kB) 2013-06-03 / 2013-06-03
1 FCC report (15.407 DFS)Test Report / Adobe Acrobat PDF (553 kB) 2013-06-03 / 2013-06-03
1 FCC MA letterCover Letter(s) / Adobe Acrobat PDF (55 kB) 2013-06-03 / 2013-06-03
1 FCC test setup photo (15.407 DFS)Test Setup Photos / Adobe Acrobat PDF (244 kB) 2013-06-03 / 2013-06-03
1 FCC Request for confidentiality letterCover Letter(s) / Adobe Acrobat PDF (24 kB) 2013-06-03 / 2013-06-03
1 Antenna Photo (ANT1267-164C U-100B)External Photos / Adobe Acrobat PDF (117 kB) 2013-06-03 / 2013-06-03
1 FCC RF exposure sheet_NIIRF Exposure Info / Adobe Acrobat PDF (74 kB) 2013-06-03 / 2013-06-03
1 FCC Authorization LetterCover Letter(s) / Adobe Acrobat PDF (30 kB) 2013-06-03 / 2013-06-03
1 FCC report (15.407)Test Report / Adobe Acrobat PDF (619 kB) 2013-06-03 / 2013-06-03
2 FCC report (15.247)Test Report / Adobe Acrobat PDF (640 kB) 2013-06-02 / 2013-06-03
2 FCC Class II Permissive Change LetterCover Letter(s) / Adobe Acrobat PDF (37 kB) 2013-06-02 / 2013-06-03
2 FCC test setup photo (15.247)Test Setup Photos / Adobe Acrobat PDF (492 kB) 2013-06-02 / 2013-06-03
2 FCC Declaration Letter of professional installCover Letter(s) / Adobe Acrobat PDF (25 kB) 2013-06-02 / 2013-06-03
2 Antenna Photo (ANT1267-164C U-100B)External Photos / Adobe Acrobat PDF (117 kB) 2013-06-02 / 2013-06-03
2 FCC MA letterCover Letter(s) / Adobe Acrobat PDF (55 kB) 2013-06-02 / 2013-06-03
2 FCC Request for confidentiality letterCover Letter(s) / Adobe Acrobat PDF (24 kB) 2013-06-02 / 2013-06-03
2 FCC RF exposure sheet_DTSRF Exposure Info / Adobe Acrobat PDF (31 kB) 2013-06-02 / 2013-06-03
2 FCC Authorization LetterCover Letter(s) / Adobe Acrobat PDF (30 kB) 2013-06-02 / 2013-06-03
3 RF Exposure InformationRF Exposure Info / Adobe Acrobat PDF (551 kB) 2014-06-27 / 2014-06-27
3 Internal PhotosInternal Photos / Adobe Acrobat PDF (109 kB) 2014-06-25 / 2014-06-27
3 Internal Photos 2Internal Photos / Adobe Acrobat PDF (159 kB) 2014-06-25 / 2014-06-27
3 Internal Photos 3Internal Photos / Adobe Acrobat PDF (381 kB) 2014-06-25 / 2014-06-27
3 Reassessment LetterCover Letter(s) / Adobe Acrobat PDF (522 kB) 2014-06-25 / 2014-06-27
3 Test ReportTest Report / Adobe Acrobat PDF (1006 kB) 2014-06-25 / 2014-06-27
3 External PhotosExternal Photos / Adobe Acrobat PDF (304 kB) 2014-06-25 / 2014-06-27
3 Users ManualUsers Manual / Adobe Acrobat PDF (167 kB) 2014-06-25 / 2014-06-27
3 External Photos 2External Photos / Adobe Acrobat PDF (309 kB) 2014-06-25 / 2014-06-27
4 FCC Test Report_NIITest Report / Adobe Acrobat PDF (2517 kB) 2016-11-03 / 2016-11-03
4 FCC Test Setup Photo_NIITest Setup Photos / Adobe Acrobat PDF (1560 kB) 2016-11-03 / 2016-11-03
4 FCC Authorization LetterCover Letter(s) / Adobe Acrobat PDF (170 kB) 2016-11-03 / 2016-11-03
4 FCC Class II Permissive Change Letter (FCC 14-30_Old rule or New rule)Cover Letter(s) / Adobe Acrobat PDF (264 kB) 2016-11-03 / 2016-11-03
4 FCC Request for Confidentiality Letter(SX-PCEAN W58)Cover Letter(s) / Adobe Acrobat PDF (135 kB) 2016-11-03 / 2016-11-03
4 FCC RF Exposure_NIIRF Exposure Info / Adobe Acrobat PDF (16 kB) 2016-11-03 / 2016-11-03
5 FCC Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (73 kB) 2014-07-25 / 2014-08-04
5 FCC15C reportTest Report / Adobe Acrobat PDF (662 kB) 2014-07-25 / 2014-08-04
5 FCC15C test setup photoTest Setup Photos / Adobe Acrobat PDF (562 kB) 2014-07-25 / 2014-08-04
5 FCC Authorization LetterCover Letter(s) / Adobe Acrobat PDF (90 kB) 2014-07-25 / 2014-08-04
5 RF Exposure (15C)RF Exposure Info / Adobe Acrobat PDF (33 kB) 2014-07-25 / 2014-08-04
5 FCC Class II Permissive Change LetterCover Letter(s) / Adobe Acrobat PDF (20 kB) 2014-07-25 / 2014-08-04
5 External Photo_Antenna_AA222External Photos / Adobe Acrobat PDF (128 kB) 2014-07-25 / 2014-08-04
5 FCC MA LetterCover Letter(s) / Adobe Acrobat PDF (178 kB) 2014-07-25 / 2014-08-04
6 FCC Request for confidentiality letterCover Letter(s) / Adobe Acrobat PDF (24 kB) 2012-10-12 / 2012-12-14
6 External PhotoExternal Photos / Adobe Acrobat PDF (257 kB) 2012-10-12 / 2012-12-14
6 03-1 FCC RF exposure sheet (15.407)RF Exposure Info / Adobe Acrobat PDF (74 kB) 2012-10-12 / 2012-12-14
6 Internal PhotoInternal Photos / Adobe Acrobat PDF (253 kB) 2012-10-12 / 2012-12-14
6 03-2 FCC report (15.407)Test Report / Adobe Acrobat PDF (1164 kB) 2012-10-12 / 2012-12-14
6 FCC Labeling Requirements and InformationID Label/Location Info / Adobe Acrobat PDF (20 kB) 2012-10-12 / 2012-12-14
6 Users ManualUsers Manual / Adobe Acrobat PDF (339 kB) 2012-10-12 / 2012-12-14
6 03-3 FCC test setup photo (15.407)Test Setup Photos / Adobe Acrobat PDF (608 kB) 2012-10-12 / 2012-12-14
6 FCC MA letterCover Letter(s) / Adobe Acrobat PDF (62 kB) 2012-10-12 / 2012-12-14
6 Label & LocationID Label/Location Info / Adobe Acrobat PDF (239 kB) 2012-10-12 / 2012-12-14
6 03-4 FCC report (15.407_DFS)Test Report / Adobe Acrobat PDF (836 kB) 2012-10-12 / 2012-12-14
6 FCC Manufacturer’s LetterCover Letter(s) / Adobe Acrobat PDF (19 kB) 2012-10-12 / 2012-12-14
6 05 Users Manual_Rev.pdfUsers Manual / Adobe Acrobat PDF (338 kB) 2012-11-01 / 2012-12-14
6 03-5 FCC test setup photo (15.407_DFS)Test Setup Photos / Adobe Acrobat PDF (83 kB) 2012-10-12 / 2012-12-14
7 Users ManualUsers Manual / Adobe Acrobat PDF (167 kB) 2014-06-27 / 2014-06-30
7 External Photos 2External Photos / Adobe Acrobat PDF (610 kB) 2014-06-27 / 2014-06-30
7 Users Manual 2Users Manual / Adobe Acrobat PDF (694 kB) 2014-06-27 / 2014-06-30
7 Internal PhotosInternal Photos / Adobe Acrobat PDF (381 kB) 2014-06-27 / 2014-06-30
7 RF ExposureRF Exposure Info / Adobe Acrobat PDF (554 kB) 2014-06-27 / 2014-06-30
7 Test ReportTest Report / Adobe Acrobat PDF (1121 kB) 2014-06-27 / 2014-06-30
7 Reassessment LetterCover Letter(s) / Adobe Acrobat PDF (597 kB) 2014-06-27 / 2014-06-30
7 Test Setup PhotosTest Setup Photos / Adobe Acrobat PDF (204 kB) 2014-06-27 / 2014-06-30
7 External PhotosExternal Photos / Adobe Acrobat PDF (517 kB) 2014-06-27 / 2014-06-30
8 RF EXRF Exposure Info / Adobe Acrobat PDF (16 kB) 2017-01-31 / 2017-03-17
8 Authorization letterCover Letter(s) / Adobe Acrobat PDF (56 kB) 2017-01-31 / 2017-03-17
8 Test report(DFS)Test Report / Adobe Acrobat PDF (1135 kB) 2017-01-31 / 2017-03-17
8 C2PC letterCover Letter(s) / Adobe Acrobat PDF (467 kB) 2017-01-31 / 2017-03-17
8 Test setup photos(DFS)Test Setup Photos / Adobe Acrobat PDF (990 kB) 2017-01-31 / 2017-03-17
8 Confidentiality letterCover Letter(s) / Adobe Acrobat PDF (46 kB) 2017-01-31 / 2017-03-17
8 Test report(W56)Test Report / Adobe Acrobat PDF (602 kB) 2017-01-31 / 2017-03-17
8 Test setup photos(W56)Test Setup Photos / Adobe Acrobat PDF (255 kB) 2017-01-31 / 2017-03-17
9 External Photo_Antenna_AA222External Photos / Adobe Acrobat PDF (128 kB) 2014-07-25 / 2014-08-04
9 FCC MA LetterCover Letter(s) / Adobe Acrobat PDF (178 kB) 2014-07-25 / 2014-08-04
9 FCC Request for Confidentiality LetterCover Letter(s) / Adobe Acrobat PDF (73 kB) 2014-07-25 / 2014-08-04
9 FCC15E reportTest Report / Adobe Acrobat PDF (661 kB) 2014-07-25 / 2014-08-04
9 FCC15E test setup photoTest Setup Photos / Adobe Acrobat PDF (562 kB) 2014-07-25 / 2014-08-04
9 FCC Authorization LetterCover Letter(s) / Adobe Acrobat PDF (90 kB) 2014-07-25 / 2014-08-04
9 RF Exposure (15E)RF Exposure Info / Adobe Acrobat PDF (33 kB) 2014-07-25 / 2014-08-04
9 FCC Class II Permissive Change LetterCover Letter(s) / Adobe Acrobat PDF (20 kB) 2014-07-25 / 2014-08-04
10 Internal Photos 3Internal Photos / Adobe Acrobat PDF (381 kB) 2014-06-24 / 2014-06-27
10 Reassessment LetterCover Letter(s) / Adobe Acrobat PDF (522 kB) 2014-06-24 / 2014-06-27
10 RF Exposure InformationRF Exposure Info / Adobe Acrobat PDF (551 kB) 2014-06-27 / 2014-06-27
10 Internal PhotosInternal Photos / Adobe Acrobat PDF (109 kB) 2014-06-24 / 2014-06-27
10 Test ReportTest Report / Adobe Acrobat PDF (1006 kB) 2014-06-24 / 2014-06-27
10 External PhotosExternal Photos / Adobe Acrobat PDF (304 kB) 2014-06-24 / 2014-06-27
10 Internal Photos 2Internal Photos / Adobe Acrobat PDF (159 kB) 2014-06-24 / 2014-06-27
10 Users ManualUsers Manual / Adobe Acrobat PDF (167 kB) 2014-06-24 / 2014-06-27
10 External Photos 2External Photos / Adobe Acrobat PDF (309 kB) 2014-06-24 / 2014-06-27
10 Internal Photos 3Internal Photos / Adobe Acrobat PDF (381 kB) 2014-06-24 / 2014-06-27
10 Reassessment LetterCover Letter(s) / Adobe Acrobat PDF (522 kB) 2014-06-24 / 2014-06-27
10 Internal PhotosInternal Photos / Adobe Acrobat PDF (109 kB) 2014-06-24 / 2014-06-27
10 Test ReportTest Report / Adobe Acrobat PDF (1006 kB) 2014-06-24 / 2014-06-27
10 External PhotosExternal Photos / Adobe Acrobat PDF (304 kB) 2014-06-24 / 2014-06-27
10 Internal Photos 2Internal Photos / Adobe Acrobat PDF (159 kB) 2014-06-24 / 2014-06-27
10 Users ManualUsers Manual / Adobe Acrobat PDF (167 kB) 2014-06-24 / 2014-06-27
10 External Photos 2External Photos / Adobe Acrobat PDF (309 kB) 2014-06-24 / 2014-06-27
11 FCC MA letterCover Letter(s) / Adobe Acrobat PDF (62 kB) 2012-10-12 / 2012-12-14
11 External PhotoExternal Photos / Adobe Acrobat PDF (257 kB) 2012-10-12 / 2012-12-14
11 FCC Manufacturer’s LetterCover Letter(s) / Adobe Acrobat PDF (19 kB) 2012-10-12 / 2012-12-14
11 Internal PhotoInternal Photos / Adobe Acrobat PDF (253 kB) 2012-10-12 / 2012-12-14
11 FCC Request for confidentiality letterCover Letter(s) / Adobe Acrobat PDF (24 kB) 2012-10-12 / 2012-12-14
11 Users ManualUsers Manual / Adobe Acrobat PDF (339 kB) 2012-10-12 / 2012-12-14
11 FCC RF exposure sheet (15.247)RF Exposure Info / Adobe Acrobat PDF (31 kB) 2012-10-12 / 2012-12-14
11 Label & LocationID Label/Location Info / Adobe Acrobat PDF (239 kB) 2012-10-12 / 2012-12-14
11 FCC report (15.247)Test Report / Adobe Acrobat PDF (2077 kB) 2012-10-12 / 2012-12-14
11 FCC Labeling Requirements and InformationID Label/Location Info / Adobe Acrobat PDF (20 kB) 2012-10-12 / 2012-12-14
11 FCC test setup photo (15.247)Test Setup Photos / Adobe Acrobat PDF (561 kB) 2012-10-12 / 2012-12-14

APP # 1 (2013-06-03) Documents

FCC Class II Permissive Change Letter
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (37 kB)
FCC Request for confidentiality letter
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
FCC Class II Permissive Change Letter
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (37 kB)
FCC test setup photo (15.407)
 2013-06-03 / 2013-06-03 Test Setup Photos / Adobe Acrobat PDF (535 kB)
FCC Declaration Letter of professional install
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (25 kB)
FCC RF exposure sheet_NII
 2013-06-03 / 2013-06-03 RF Exposure Info / Adobe Acrobat PDF (74 kB)
FCC Declaration Letter of professional install
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (25 kB)
FCC report (15.407 DFS)
 2013-06-03 / 2013-06-03 Test Report / Adobe Acrobat PDF (553 kB)
FCC MA letter
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (55 kB)
(Confidential) Theory of Operation_Antenna (ANT1267-164C U-100B)
 2013-06-03 / N/A Operational Description / Adobe Acrobat PDF (86 kB)
FCC test setup photo (15.407 DFS)
 2013-06-03 / 2013-06-03 Test Setup Photos / Adobe Acrobat PDF (244 kB)
FCC MA letter
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (55 kB)
FCC test setup photo (15.407 DFS)
 2013-06-03 / 2013-06-03 Test Setup Photos / Adobe Acrobat PDF (244 kB)
(Confidential) Theory of Operation_Antenna installation
 2013-06-03 / N/A Operational Description / Adobe Acrobat PDF (74 kB)
FCC Request for confidentiality letter
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
FCC test setup photo (15.407)
 2013-06-03 / 2013-06-03 Test Setup Photos / Adobe Acrobat PDF (535 kB)
FCC report (15.407 DFS)
 2013-06-03 / 2013-06-03 Test Report / Adobe Acrobat PDF (553 kB)
Antenna Photo (ANT1267-164C U-100B)
 2013-06-03 / 2013-06-03 External Photos / Adobe Acrobat PDF (117 kB)
Antenna Photo (ANT1267-164C U-100B)
 2013-06-03 / 2013-06-03 External Photos / Adobe Acrobat PDF (117 kB)
FCC RF exposure sheet_NII
 2013-06-03 / 2013-06-03 RF Exposure Info / Adobe Acrobat PDF (74 kB)
FCC Authorization Letter
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (30 kB)
FCC report (15.407)
 2013-06-03 / 2013-06-03 Test Report / Adobe Acrobat PDF (619 kB)
FCC Authorization Letter
 2013-06-03 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (30 kB)
FCC report (15.407)
 2013-06-03 / 2013-06-03 Test Report / Adobe Acrobat PDF (619 kB)

APP # 2 (2013-06-03) Documents

FCC MA letter
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (55 kB)
FCC report (15.247)
 2013-06-02 / 2013-06-03 Test Report / Adobe Acrobat PDF (640 kB)
(Confidential) Theory of Operation_Antenna installation
 2013-06-02 / N/A Operational Description / Adobe Acrobat PDF (74 kB)
FCC Class II Permissive Change Letter
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (37 kB)
FCC report (15.247)
 2013-06-02 / 2013-06-03 Test Report / Adobe Acrobat PDF (640 kB)
FCC test setup photo (15.247)
 2013-06-02 / 2013-06-03 Test Setup Photos / Adobe Acrobat PDF (492 kB)
Antenna Photo (ANT1267-164C U-100B)
 2013-06-02 / 2013-06-03 External Photos / Adobe Acrobat PDF (117 kB)
FCC Declaration Letter of professional install
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (25 kB)
FCC Request for confidentiality letter
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
Antenna Photo (ANT1267-164C U-100B)
 2013-06-02 / 2013-06-03 External Photos / Adobe Acrobat PDF (117 kB)
FCC Authorization Letter
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (30 kB)
FCC MA letter
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (55 kB)
FCC RF exposure sheet_DTS
 2013-06-02 / 2013-06-03 RF Exposure Info / Adobe Acrobat PDF (31 kB)
FCC Class II Permissive Change Letter
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (37 kB)
FCC Request for confidentiality letter
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
FCC test setup photo (15.247)
 2013-06-02 / 2013-06-03 Test Setup Photos / Adobe Acrobat PDF (492 kB)
FCC Declaration Letter of professional install
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (25 kB)
(Confidential) Theory of Operation_Antenna (ANT1267-164C U-100B)
 2013-06-02 / N/A Operational Description / Adobe Acrobat PDF (86 kB)
FCC RF exposure sheet_DTS
 2013-06-02 / 2013-06-03 RF Exposure Info / Adobe Acrobat PDF (31 kB)
FCC Authorization Letter
 2013-06-02 / 2013-06-03 Cover Letter(s) / Adobe Acrobat PDF (30 kB)

APP # 3 (2014-06-27) Documents

Internal Photos
 2014-06-25 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (109 kB)
RF Exposure Information
 2014-06-27 / 2014-06-27 RF Exposure Info / Adobe Acrobat PDF (551 kB)
Internal Photos
 2014-06-25 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (109 kB)
Test Report
 2014-06-25 / 2014-06-27 Test Report / Adobe Acrobat PDF (1006 kB)
Internal Photos 2
 2014-06-25 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (159 kB)
Internal Photos 2
 2014-06-25 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (159 kB)
Users Manual
 2014-06-25 / 2014-06-27 Users Manual / Adobe Acrobat PDF (167 kB)
Internal Photos 3
 2014-06-25 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (381 kB)
Internal Photos 3
 2014-06-25 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (381 kB)
Reassessment Letter
 2014-06-25 / 2014-06-27 Cover Letter(s) / Adobe Acrobat PDF (522 kB)
Reassessment Letter
 2014-06-25 / 2014-06-27 Cover Letter(s) / Adobe Acrobat PDF (522 kB)
External Photos
 2014-06-25 / 2014-06-27 External Photos / Adobe Acrobat PDF (304 kB)
Test Report
 2014-06-25 / 2014-06-27 Test Report / Adobe Acrobat PDF (1006 kB)
External Photos
 2014-06-25 / 2014-06-27 External Photos / Adobe Acrobat PDF (304 kB)
RF Exposure
 2014-06-25 / 2014-06-27 RF Exposure Info / Adobe Acrobat PDF (611 kB)
External Photos 2
 2014-06-25 / 2014-06-27 External Photos / Adobe Acrobat PDF (309 kB)
Users Manual
 2014-06-25 / 2014-06-27 Users Manual / Adobe Acrobat PDF (167 kB)
External Photos 2
 2014-06-25 / 2014-06-27 External Photos / Adobe Acrobat PDF (309 kB)
RF Exposure Information
 2014-06-27 / 2014-06-27 RF Exposure Info / Adobe Acrobat PDF (551 kB)

APP # 4 (2016-11-03) Documents

FCC Test Report_NII
 2016-11-03 / 2016-11-03 Test Report / Adobe Acrobat PDF (2517 kB)
(Confidential)Theory operation_antenna list
 2016-11-03 / N/A Operational Description / Adobe Acrobat PDF (18 kB)
FCC Test Report_NII
 2016-11-03 / 2016-11-03 Test Report / Adobe Acrobat PDF (2517 kB)
FCC Test Setup Photo_NII
 2016-11-03 / 2016-11-03 Test Setup Photos / Adobe Acrobat PDF (1560 kB)
FCC Authorization Letter
 2016-11-03 / 2016-11-03 Cover Letter(s) / Adobe Acrobat PDF (170 kB)
FCC Test Setup Photo_NII
 2016-11-03 / 2016-11-03 Test Setup Photos / Adobe Acrobat PDF (1560 kB)
FCC Authorization Letter
 2016-11-03 / 2016-11-03 Cover Letter(s) / Adobe Acrobat PDF (170 kB)
FCC Class II Permissive Change Letter (FCC 14-30_Old rule or New rule)
 2016-11-03 / 2016-11-03 Cover Letter(s) / Adobe Acrobat PDF (264 kB)
FCC Class II Permissive Change Letter (FCC 14-30_Old rule or New rule)
 2016-11-03 / 2016-11-03 Cover Letter(s) / Adobe Acrobat PDF (264 kB)
FCC Request for Confidentiality Letter(SX-PCEAN W58)
 2016-11-03 / 2016-11-03 Cover Letter(s) / Adobe Acrobat PDF (135 kB)
FCC Request for Confidentiality Letter(SX-PCEAN W58)
 2016-11-03 / 2016-11-03 Cover Letter(s) / Adobe Acrobat PDF (135 kB)
FCC RF Exposure_NII
 2016-11-03 / 2016-11-03 RF Exposure Info / Adobe Acrobat PDF (16 kB)
(Confidential) Theory of Operation-Software Security
 2016-11-03 / N/A Operational Description / Adobe Acrobat PDF (21 kB)
FCC RF Exposure_NII
 2016-11-03 / 2016-11-03 RF Exposure Info / Adobe Acrobat PDF (16 kB)

APP # 5 (2014-08-04) Documents

FCC Request for Confidentiality Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (73 kB)
FCC15C test setup photo
 2014-07-25 / 2014-08-04 Test Setup Photos / Adobe Acrobat PDF (562 kB)
FCC Authorization Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (90 kB)
(Confidential)Theory of Operation-Antenna_AA222
 2014-07-25 / N/A Operational Description / Adobe Acrobat PDF (704 kB)
FCC15C report
 2014-07-25 / 2014-08-04 Test Report / Adobe Acrobat PDF (662 kB)
RF Exposure (15C)
 2014-07-25 / 2014-08-04 RF Exposure Info / Adobe Acrobat PDF (33 kB)
FCC Class II Permissive Change Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (20 kB)
(Confidential)Theory operation_antenna list
 2014-07-25 / N/A Operational Description / Adobe Acrobat PDF (15 kB)
FCC15C test setup photo
 2014-07-25 / 2014-08-04 Test Setup Photos / Adobe Acrobat PDF (562 kB)
FCC Authorization Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (90 kB)
FCC MA Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (178 kB)
RF Exposure (15C)
 2014-07-25 / 2014-08-04 RF Exposure Info / Adobe Acrobat PDF (33 kB)
04 (Confidential)Theory of Operation-Antenna_AA222
 2014-08-04 / N/A Operational Description / Adobe Acrobat PDF (352 kB)
FCC Class II Permissive Change Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (20 kB)
FCC Request for Confidentiality Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (73 kB)
External Photo_Antenna_AA222
 2014-07-25 / 2014-08-04 External Photos / Adobe Acrobat PDF (128 kB)
04 (Confidential)Theory operation_antenna list_R
 2014-08-04 / N/A Operational Description / Adobe Acrobat PDF (36 kB)
FCC MA Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (178 kB)
FCC15C report
 2014-07-25 / 2014-08-04 Test Report / Adobe Acrobat PDF (662 kB)
External Photo_Antenna_AA222
 2014-07-25 / 2014-08-04 External Photos / Adobe Acrobat PDF (128 kB)

APP # 6 (2012-12-14) Documents

FCC Request for confidentiality letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
03-5 FCC test setup photo (15.407_DFS)
 2012-10-12 / 2012-12-14 Test Setup Photos / Adobe Acrobat PDF (83 kB)
(Confidential) Theory of Operation 3_Antenna
 2012-10-12 / N/A Operational Description / Adobe Acrobat PDF (3162 kB)
Theory of Operation_Inquiry number 795162
 2012-11-11 / N/A Operational Description / Adobe Acrobat PDF (30 kB)
(Confidential) Operational Description
 2012-10-12 / N/A Operational Description / Adobe Acrobat PDF (18 kB)
FCC MA letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (62 kB)
External Photo
 2012-10-12 / 2012-12-14 External Photos / Adobe Acrobat PDF (257 kB)
05 Users Manual_Rev.pdf
 2012-11-01 / 2012-12-14 Users Manual / Adobe Acrobat PDF (338 kB)
03-1 FCC RF exposure sheet (15.407)
 2012-10-12 / 2012-12-14 RF Exposure Info / Adobe Acrobat PDF (74 kB)
03-1 FCC RF exposure sheet (15.407)
 2012-10-12 / 2012-12-14 RF Exposure Info / Adobe Acrobat PDF (74 kB)
Users Manual
 2012-10-12 / 2012-12-14 Users Manual / Adobe Acrobat PDF (339 kB)
(Confidential) Parts List
 2012-10-12 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (38 kB)
FCC Manufacturer’s Letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (19 kB)
Internal Photo
 2012-10-12 / 2012-12-14 Internal Photos / Adobe Acrobat PDF (253 kB)
08 (Confidential) Theory of Operation 2_Specification_Rev.pdf
 2012-11-01 / N/A Operational Description / Adobe Acrobat PDF (570 kB)
03-2 FCC report (15.407)
 2012-10-12 / 2012-12-14 Test Report / Adobe Acrobat PDF (1164 kB)
03-2 FCC report (15.407)
 2012-10-12 / 2012-12-14 Test Report / Adobe Acrobat PDF (1164 kB)
FCC Labeling Requirements and Information
 2012-10-12 / 2012-12-14 ID Label/Location Info / Adobe Acrobat PDF (20 kB)
(Confidential) Schematic
 2012-10-12 / N/A Schematics / Adobe Acrobat PDF (514 kB)
FCC Request for confidentiality letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
Users Manual
 2012-10-12 / 2012-12-14 Users Manual / Adobe Acrobat PDF (339 kB)
External Photo
 2012-10-12 / 2012-12-14 External Photos / Adobe Acrobat PDF (257 kB)
03-3 FCC test setup photo (15.407)
 2012-10-12 / 2012-12-14 Test Setup Photos / Adobe Acrobat PDF (608 kB)
FCC MA letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (62 kB)
03-3 FCC test setup photo (15.407)
 2012-10-12 / 2012-12-14 Test Setup Photos / Adobe Acrobat PDF (608 kB)
(Confidential) Theory of operation 1_Channel
 2012-10-12 / N/A Operational Description / Adobe Acrobat PDF (32 kB)
Internal Photo
 2012-10-12 / 2012-12-14 Internal Photos / Adobe Acrobat PDF (253 kB)
Label & Location
 2012-10-12 / 2012-12-14 ID Label/Location Info / Adobe Acrobat PDF (239 kB)
FCC Authorization Letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (26 kB)
03-4 FCC report (15.407_DFS)
 2012-10-12 / 2012-12-14 Test Report / Adobe Acrobat PDF (836 kB)
FCC Manufacturer’s Letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (19 kB)
03-4 FCC report (15.407_DFS)
 2012-10-12 / 2012-12-14 Test Report / Adobe Acrobat PDF (836 kB)
(Confidential) Theory of Operation 2_Specification
 2012-10-12 / N/A Operational Description / Adobe Acrobat PDF (572 kB)
Label & Location
 2012-10-12 / 2012-12-14 ID Label/Location Info / Adobe Acrobat PDF (239 kB)
05 Users Manual_Rev.pdf
 2012-11-01 / 2012-12-14 Users Manual / Adobe Acrobat PDF (338 kB)
(Confidential) Block Diagram
 2012-10-12 / N/A Block Diagram / Adobe Acrobat PDF (132 kB)
FCC Labeling Requirements and Information
 2012-10-12 / 2012-12-14 ID Label/Location Info / Adobe Acrobat PDF (20 kB)
03-5 FCC test setup photo (15.407_DFS)
 2012-10-12 / 2012-12-14 Test Setup Photos / Adobe Acrobat PDF (83 kB)

APP # 7 (2014-06-30) Documents

Test Report
 2014-06-27 / 2014-06-30 Test Report / Adobe Acrobat PDF (1121 kB)
External Photos
 2014-06-27 / 2014-06-30 External Photos / Adobe Acrobat PDF (517 kB)
Users Manual
 2014-06-27 / 2014-06-30 Users Manual / Adobe Acrobat PDF (167 kB)
External Photos 2
 2014-06-27 / 2014-06-30 External Photos / Adobe Acrobat PDF (610 kB)
Test Setup Photos
 2014-06-27 / 2014-06-30 Test Setup Photos / Adobe Acrobat PDF (204 kB)
External Photos 2
 2014-06-27 / 2014-06-30 External Photos / Adobe Acrobat PDF (610 kB)
Users Manual 2
 2014-06-27 / 2014-06-30 Users Manual / Adobe Acrobat PDF (694 kB)
Internal Photos
 2014-06-27 / 2014-06-30 Internal Photos / Adobe Acrobat PDF (381 kB)
Users Manual
 2014-06-27 / 2014-06-30 Users Manual / Adobe Acrobat PDF (167 kB)
Internal Photos
 2014-06-27 / 2014-06-30 Internal Photos / Adobe Acrobat PDF (381 kB)
RF Exposure
 2014-06-27 / 2014-06-30 RF Exposure Info / Adobe Acrobat PDF (554 kB)
Users Manual 2
 2014-06-27 / 2014-06-30 Users Manual / Adobe Acrobat PDF (694 kB)
Reassessment Letter
 2014-06-27 / 2014-06-30 Cover Letter(s) / Adobe Acrobat PDF (597 kB)
Test Report
 2014-06-27 / 2014-06-30 Test Report / Adobe Acrobat PDF (1121 kB)
Reassessment Letter
 2014-06-27 / 2014-06-30 Cover Letter(s) / Adobe Acrobat PDF (597 kB)
RF Exposure
 2014-06-27 / 2014-06-30 RF Exposure Info / Adobe Acrobat PDF (554 kB)
Test Setup Photos
 2014-06-27 / 2014-06-30 Test Setup Photos / Adobe Acrobat PDF (204 kB)
External Photos
 2014-06-27 / 2014-06-30 External Photos / Adobe Acrobat PDF (517 kB)

APP # 8 (2017-03-17) Documents

Operational description(Security_reviced)
 2017-03-14 / N/A Operational Description / Adobe Acrobat PDF (22 kB)
Confidentiality letter
 2017-01-31 / 2017-03-17 Cover Letter(s) / Adobe Acrobat PDF (46 kB)
RF EX
 2017-01-31 / 2017-03-17 RF Exposure Info / Adobe Acrobat PDF (16 kB)
Authorization letter
 2017-01-31 / 2017-03-17 Cover Letter(s) / Adobe Acrobat PDF (56 kB)
RF EX
 2017-01-31 / 2017-03-17 RF Exposure Info / Adobe Acrobat PDF (16 kB)
Operational description
 2017-01-31 / N/A Operational Description / Adobe Acrobat PDF (602 kB)
Test report(DFS)
 2017-01-31 / 2017-03-17 Test Report / Adobe Acrobat PDF (1135 kB)
C2PC letter
 2017-01-31 / 2017-03-17 Cover Letter(s) / Adobe Acrobat PDF (467 kB)
Test report(DFS)
 2017-01-31 / 2017-03-17 Test Report / Adobe Acrobat PDF (1135 kB)
Operational description(Antenna list)
 2017-01-31 / N/A Operational Description / Adobe Acrobat PDF (24 kB)
Test setup photos(DFS)
 2017-01-31 / 2017-03-17 Test Setup Photos / Adobe Acrobat PDF (990 kB)
Authorization letter
 2017-01-31 / 2017-03-17 Cover Letter(s) / Adobe Acrobat PDF (56 kB)
Confidentiality letter
 2017-01-31 / 2017-03-17 Cover Letter(s) / Adobe Acrobat PDF (46 kB)
Test report(W56)
 2017-01-31 / 2017-03-17 Test Report / Adobe Acrobat PDF (602 kB)
Operational description(Channel list)
 2017-01-31 / N/A Operational Description / Adobe Acrobat PDF (35 kB)
Block diagram
 2017-01-31 / N/A Block Diagram / Adobe Acrobat PDF (48 kB)
Test report(W56)
 2017-01-31 / 2017-03-17 Test Report / Adobe Acrobat PDF (602 kB)
Test setup photos(DFS)
 2017-01-31 / 2017-03-17 Test Setup Photos / Adobe Acrobat PDF (990 kB)
Operational description(Security)
 2017-01-31 / N/A Operational Description / Adobe Acrobat PDF (22 kB)
C2PC letter
 2017-01-31 / 2017-03-17 Cover Letter(s) / Adobe Acrobat PDF (467 kB)
Test setup photos(W56)
 2017-01-31 / 2017-03-17 Test Setup Photos / Adobe Acrobat PDF (255 kB)
Test setup photos(W56)
 2017-01-31 / 2017-03-17 Test Setup Photos / Adobe Acrobat PDF (255 kB)

APP # 9 (2014-08-04) Documents

04 (Confidential)Theory operation_antenna list_R
 2014-08-04 / N/A Operational Description / Adobe Acrobat PDF (36 kB)
External Photo_Antenna_AA222
 2014-07-25 / 2014-08-04 External Photos / Adobe Acrobat PDF (128 kB)
FCC MA Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (178 kB)
FCC15E report
 2014-07-25 / 2014-08-04 Test Report / Adobe Acrobat PDF (661 kB)
External Photo_Antenna_AA222
 2014-07-25 / 2014-08-04 External Photos / Adobe Acrobat PDF (128 kB)
FCC Request for Confidentiality Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (73 kB)
FCC15E test setup photo
 2014-07-25 / 2014-08-04 Test Setup Photos / Adobe Acrobat PDF (562 kB)
FCC Authorization Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (90 kB)
(Confidential)Theory of Operation-Antenna_AA222
 2014-07-25 / N/A Operational Description / Adobe Acrobat PDF (704 kB)
FCC15E report
 2014-07-25 / 2014-08-04 Test Report / Adobe Acrobat PDF (661 kB)
RF Exposure (15E)
 2014-07-25 / 2014-08-04 RF Exposure Info / Adobe Acrobat PDF (33 kB)
FCC Class II Permissive Change Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (20 kB)
(Confidential)Theory operation_antenna list
 2014-07-25 / N/A Operational Description / Adobe Acrobat PDF (15 kB)
FCC15E test setup photo
 2014-07-25 / 2014-08-04 Test Setup Photos / Adobe Acrobat PDF (562 kB)
FCC Authorization Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (90 kB)
FCC MA Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (178 kB)
04 (Confidential)Theory of Operation-Antenna_AA222
 2014-08-04 / N/A Operational Description / Adobe Acrobat PDF (352 kB)
RF Exposure (15E)
 2014-07-25 / 2014-08-04 RF Exposure Info / Adobe Acrobat PDF (33 kB)
FCC Class II Permissive Change Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (20 kB)
FCC Request for Confidentiality Letter
 2014-07-25 / 2014-08-04 Cover Letter(s) / Adobe Acrobat PDF (73 kB)

APP # 10 (2014-06-27) Documents

Internal Photos 3
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (381 kB)
Reassessment Letter
 2014-06-24 / 2014-06-27 Cover Letter(s) / Adobe Acrobat PDF (522 kB)
RF Exposure Information
 2014-06-27 / 2014-06-27 RF Exposure Info / Adobe Acrobat PDF (551 kB)
Reassessment Letter
 2014-06-24 / 2014-06-27 Cover Letter(s) / Adobe Acrobat PDF (522 kB)
Internal Photos
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (109 kB)
Test Report
 2014-06-24 / 2014-06-27 Test Report / Adobe Acrobat PDF (1006 kB)
External Photos
 2014-06-24 / 2014-06-27 External Photos / Adobe Acrobat PDF (304 kB)
External Photos
 2014-06-24 / 2014-06-27 External Photos / Adobe Acrobat PDF (304 kB)
RF Exposure Info
 2014-06-25 / 2014-06-27 RF Exposure Info / Adobe Acrobat PDF (611 kB)
Internal Photos 2
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (159 kB)
Users Manual
 2014-06-24 / 2014-06-27 Users Manual / Adobe Acrobat PDF (167 kB)
External Photos 2
 2014-06-24 / 2014-06-27 External Photos / Adobe Acrobat PDF (309 kB)
External Photos 2
 2014-06-24 / 2014-06-27 External Photos / Adobe Acrobat PDF (309 kB)
RF Exposure Information
 2014-06-27 / 2014-06-27 RF Exposure Info / Adobe Acrobat PDF (551 kB)
Internal Photos 3
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (381 kB)
Internal Photos
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (109 kB)
Reassessment Letter
 2014-06-24 / 2014-06-27 Cover Letter(s) / Adobe Acrobat PDF (522 kB)
Internal Photos
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (109 kB)
Test Report
 2014-06-24 / 2014-06-27 Test Report / Adobe Acrobat PDF (1006 kB)
Test Report
 2014-06-24 / 2014-06-27 Test Report / Adobe Acrobat PDF (1006 kB)
Internal Photos 2
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (159 kB)
External Photos
 2014-06-24 / 2014-06-27 External Photos / Adobe Acrobat PDF (304 kB)
Internal Photos 2
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (159 kB)
Users Manual
 2014-06-24 / 2014-06-27 Users Manual / Adobe Acrobat PDF (167 kB)
Users Manual
 2014-06-24 / 2014-06-27 Users Manual / Adobe Acrobat PDF (167 kB)
Internal Photos 3
 2014-06-24 / 2014-06-27 Internal Photos / Adobe Acrobat PDF (381 kB)
External Photos 2
 2014-06-24 / 2014-06-27 External Photos / Adobe Acrobat PDF (309 kB)

APP # 11 (2012-12-14) Documents

(Confidential) Theory of operation 1_Channel
 2012-10-12 / N/A Operational Description / Adobe Acrobat PDF (32 kB)
FCC MA letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (62 kB)
FCC test setup photo (15.247)
 2012-10-12 / 2012-12-14 Test Setup Photos / Adobe Acrobat PDF (561 kB)
FCC MA letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (62 kB)
External Photo
 2012-10-12 / 2012-12-14 External Photos / Adobe Acrobat PDF (257 kB)
(Confidential) Theory of Operation 2_Specification
 2012-10-12 / N/A Operational Description / Adobe Acrobat PDF (572 kB)
FCC Manufacturer’s Letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (19 kB)
Internal Photo
 2012-10-12 / 2012-12-14 Internal Photos / Adobe Acrobat PDF (253 kB)
(Confidential) Block Diagram
 2012-10-12 / N/A Block Diagram / Adobe Acrobat PDF (132 kB)
FCC Manufacturer’s Letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (19 kB)
Internal Photo
 2012-10-12 / 2012-12-14 Internal Photos / Adobe Acrobat PDF (253 kB)
(Confidential) Theory of Operation 3_Antenna
 2012-10-12 / N/A Operational Description / Adobe Acrobat PDF (3162 kB)
FCC Request for confidentiality letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
Label & Location
 2012-10-12 / 2012-12-14 ID Label/Location Info / Adobe Acrobat PDF (239 kB)
(Confidential) Operational Description
 2012-10-12 / N/A Operational Description / Adobe Acrobat PDF (18 kB)
FCC report (15.247)
 2012-10-12 / 2012-12-14 Test Report / Adobe Acrobat PDF (2077 kB)
Users Manual
 2012-10-12 / 2012-12-14 Users Manual / Adobe Acrobat PDF (339 kB)
External Photo
 2012-10-12 / 2012-12-14 External Photos / Adobe Acrobat PDF (257 kB)
FCC RF exposure sheet (15.247)
 2012-10-12 / 2012-12-14 RF Exposure Info / Adobe Acrobat PDF (31 kB)
(Confidential) Parts List
 2012-10-12 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (38 kB)
Users Manual
 2012-10-12 / 2012-12-14 Users Manual / Adobe Acrobat PDF (339 kB)
Label & Location
 2012-10-12 / 2012-12-14 ID Label/Location Info / Adobe Acrobat PDF (239 kB)
FCC Request for confidentiality letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
FCC Authorization Letter
 2012-10-12 / 2012-12-14 Cover Letter(s) / Adobe Acrobat PDF (26 kB)
FCC report (15.247)
 2012-10-12 / 2012-12-14 Test Report / Adobe Acrobat PDF (2077 kB)
(Confidential) Schematic
 2012-10-12 / N/A Schematics / Adobe Acrobat PDF (514 kB)
FCC Labeling Requirements and Information
 2012-10-12 / 2012-12-14 ID Label/Location Info / Adobe Acrobat PDF (20 kB)
FCC RF exposure sheet (15.247)
 2012-10-12 / 2012-12-14 RF Exposure Info / Adobe Acrobat PDF (31 kB)
FCC Labeling Requirements and Information
 2012-10-12 / 2012-12-14 ID Label/Location Info / Adobe Acrobat PDF (20 kB)
FCC test setup photo (15.247)
 2012-10-12 / 2012-12-14 Test Setup Photos / Adobe Acrobat PDF (561 kB)

Correspondence

All Correspondence

App # Document Date
1 [Re-Sent]E-Mail generated [Oct 31 2012] 2012-11-02 09:56:24
Stephen.Jackson
1 Incoming Correspondence generated [Nov 1 2012] 2012-11-02 10:02:11
Stephen.Jackson
1 Incoming Correspondence generated [Nov 1 2012] 2012-11-02 10:02:45
Stephen.Jackson
1 [Re-Sent]Confidential letter to applicant generated [Dec 11 2012] 2012-12-11 17:04:18

APP # 1 (2013-06-03)

App # Document Type
1 [Re-Sent]E-Mail generated [Oct 31 2012] 2012-11-02 09:56:24
Stephen.Jackson
1 Incoming Correspondence generated [Nov 1 2012] 2012-11-02 10:02:11
Stephen.Jackson
1 Incoming Correspondence generated [Nov 1 2012] 2012-11-02 10:02:45
Stephen.Jackson
1 [Re-Sent]Confidential letter to applicant generated [Dec 11 2012] 2012-12-11 17:04:18

Grants

TCB Grant from App #1 (2013-06-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/03/2013

Application Dated: 06/02/2013
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant from App #1 (2013-06-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 06/03/2013

Application Dated: 06/02/2013
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA879729

TCB Grant from App #2 (2013-06-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/03/2013

Application Dated: 06/02/2013
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #2 (2013-06-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 06/03/2013

Application Dated: 06/02/2013
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA799676

TCB Grant from App #3 (2014-06-27)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 06/27/2014

Application Dated: 06/24/2014
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #3 (2014-06-27)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 06/27/2014

Application Dated: 06/24/2014
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA923218

TCB Grant from App #4 (2016-11-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 11/03/2016

Application Dated: 11/03/2016
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0266  
38 CC MO 15E 5745.0  -  5825.0 0.035  

Class II Permissive Change based on FCC14-30. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Note 38 can be applied for following three antennas only: ANTDP-027A0, ANT1267-164C/U-100B and AA222.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant from App #4 (2016-11-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 11/03/2016

Application Dated: 11/03/2016
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0266  
38 CC MO 15E 5745.0  -  5825.0 0.035  

Class II Permissive Change based on FCC14-30. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Note 38 can be applied for following three antennas only: ANTDP-027A0, ANT1267-164C/U-100B and AA222.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA175321

TCB Grant from App #5 (2014-08-04)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 08/04/2014

Application Dated: 07/25/2014
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #5 (2014-08-04)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 08/04/2014

Application Dated: 07/25/2014
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA315122

TCB Grant from App #6 (2012-12-14)

EAS Grant from App #6 (2012-12-14)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 12/14/2012

Application Dated: 10/12/2012
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5320.0 0.0266  

Modular approval. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:
Yoshinobu Asai, Team Leader
UL Japan, Inc.
4383-326 Asama-cho, Ise-shi
Mie-ken, 516-0021
Japan


EA305802

TCB Grant from App #7 (2014-06-30)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 06/30/2014

Application Dated: 06/27/2014
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant from App #7 (2014-06-30)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 06/30/2014

Application Dated: 06/27/2014
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA704699

TCB Grant from App #8 (2017-03-17)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 03/17/2017

Application Dated: 01/31/2017
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0266  
38 CC MO ND 15E 5500.0  -  5700.0 0.0429  
38 CC MO 15E 5745.0  -  5825.0 0.035  

Class II Permissive Change to add the W56 band(Applied for following one antenna only: ANTDP-027A0). Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant from App #8 (2017-03-17)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 03/17/2017

Application Dated: 01/31/2017
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0266  
38 CC MO ND 15E 5500.0  -  5700.0 0.0429  
38 CC MO 15E 5745.0  -  5825.0 0.035  

Class II Permissive Change to add the W56 band(Applied for following one antenna only: ANTDP-027A0). Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA414027

TCB Grant from App #9 (2014-08-04)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 08/04/2014

Application Dated: 07/25/2014
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Operation in 5.15-5.35 GHz band is for indoor use only. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant from App #9 (2014-08-04)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 08/04/2014

Application Dated: 07/25/2014
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Operation in 5.15-5.35 GHz band is for indoor use only. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA537722

TCB Grant from App #10 (2014-06-27)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 06/27/2014

Application Dated: 06/24/2014
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant from App #10 (2014-06-27)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 06/27/2014

Application Dated: 06/24/2014
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA657141

TCB Grant from App #11 (2012-12-14)

EAS Grant from App #11 (2012-12-14)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 12/14/2012

Application Dated: 10/12/2012
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.5516  
CC 15C 5745.0  -  5825.0 0.3456  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:
Yoshinobu Asai, Team Leader
UL Japan, Inc.
4383-326 Asama-cho, Ise-shi
Mie-ken, 516-0021
Japan


EA962427

Applications for this FCC ID

Form App # 1 (2013-06-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: /BEOG8t/fS0TiXY78+TONQ==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takahiro
Last Name: Hatakeda
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8116

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshinobu Asai
Title of authorized signature:  Team Leader

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshinobu Yoshinobu Yoshinobu
Line 1:  Yoshinobu
Line 2:  Yoshinobu
P.O. Box:  Yoshinobu
City:  Yoshinobu
State:  Yoshinobu
Country:  Yoshinobu
Zip Code:  Yoshinobu
Telephone Number:  81-596-24-8116
Fax Number:  81-596-24-8095
E-mail:  Yoshinobu.Asai@ul.com

Form App # 2 (2013-06-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: C4NByq2PBLoueTDZh+LzrA==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takahiro
Last Name: Hatakeda
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8116

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshinobu Asai
Title of authorized signature:  Team Leader

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshinobu Yoshinobu Yoshinobu
Line 1:  Yoshinobu
Line 2:  Yoshinobu
P.O. Box:  Yoshinobu
City:  Yoshinobu
State:  Yoshinobu
Country:  Yoshinobu
Zip Code:  Yoshinobu
Telephone Number:  81-596-24-8116
Fax Number:  81-596-24-8095
E-mail:  Yoshinobu.Asai@ul.com

Form App # 3 (2014-06-27)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: ex7VSTvMM36KZI0HAJ/Zpw==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: info@ckccertification.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: Silex Technology America, Inc.
First Name: Ronald
Last Name: Tozaki
Line 1: 201 E. Sandpointe Avenue
Line 2:
Duite 245
City: Santa Ana
Country:
United States
Zip Code: 92707
Telephone Number:
801-748-1199

Extension:
Fax Number: 714-258-0730
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CKC Laboratories, Inc.
First Name:   Steve
Last Name:   Behm
Telephone Number: 714-993-6112 Extension: 221
Fax Number:  866-799-9776
E-mail:  reports@ckc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Michelle Branum
Title of authorized signature:  Administrative Assistant

Complete items below if agent signs the application:

Firm Name:  CKC Certification Services, LLC
Name:  Michelle Michelle Michelle
Line 1:  Michelle
Line 2:  Michelle
P.O. Box:  Michelle
City:  Michelle
State:  Michelle
Country:  Michelle
Zip Code:  Michelle
Telephone Number:  209-966-5240
Fax Number:  866-779-9776
E-mail:  info@ckccertification.com

Form App # 4 (2016-11-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: FvXVI5Q2wgf51I5+mwSGBA==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Tsubasa
Last Name: Takayama
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change based on FCC14-30. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Note 38 can be applied for following three antennas only: ANTDP-027A0, ANT1267-164C/U-100B and AA222.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 5 (2014-08-04)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: lTcsSRrBTPIuR6hLxGokqw==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takahiro
Last Name: Hatakeda
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  -

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8116
Fax Number:  81-596-24-8095
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 6 (2012-12-14)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: mcALDYEnzw3wQB/hCkgGpQ==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

Alternative Applicant Contact

Firm Name: UL Japan, Inc.
Name: Yoshinobu Asai
Applicant Title: Team Leader
Line one: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country: Japan
Zip Code: 516-0021

TCB Information

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takahiro
Last Name: Hatakeda
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8116

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Non Technical Contact
Firm Name: UL Japan, Inc.
First Name: Yoshinobu
Last Name: Asai
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country: Japan
Zip Code: 516-0021
Telephone Number: 81-596-24-8116 Extension:
Fax Number: 81-596-24-8095
E-Mail: Yoshinobu.Asai@ul.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular approval. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshinobu Asai
Title of authorized signature:  Team Leader

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshinobu Yoshinobu Yoshinobu
Line 1:  Yoshinobu
Line 2:  Yoshinobu
P.O. Box:  Yoshinobu
City:  Yoshinobu
State:  Yoshinobu
Country:  Yoshinobu
Zip Code:  Yoshinobu
Telephone Number:  81-596-24-8116
Fax Number:  81-596-24-8095
E-mail:  Yoshinobu.Asai@ul.com

Form App # 7 (2014-06-30)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: mfayCVEOdOLxLipug48w4A==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: info@ckccertification.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: Silex Technology America, Inc.
First Name: Ronald
Last Name: Tozaki
Line 1: 201 E. Sandpointe Avenue
Line 2:
Suite 245
City: Santa Ana
State: California
Country:
United States
Zip Code: 92707
Telephone Number:
801-748-1199

Extension:
Fax Number: 714-258-0730
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CKC Laboratories, Inc.
First Name:   Steve
Last Name:   Behm
Telephone Number: 714-993-6112 Extension: 221
Fax Number:  866-799-9776
E-mail:  reports@ckc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antenna described in the filing. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Michelle Branum
Title of authorized signature:  Administrative Assistant

Complete items below if agent signs the application:

Firm Name:  CKC Certification Services, LLC
Name:  Michelle Michelle Michelle
Line 1:  Michelle
Line 2:  Michelle
P.O. Box:  Michelle
City:  Michelle
State:  Michelle
Country:  Michelle
Zip Code:  Michelle
Telephone Number:  209-966-5240
Fax Number:  866-779-9776
E-mail:  info@ckccertification.com

Form App # 8 (2017-03-17)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: Reak9m2TF/Jx7lalaHJoyA==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Tsubasa
Last Name: Takayama
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add the W56 band(Applied for following one antenna only: ANTDP-027A0). Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 9 (2014-08-04)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: UWVk46Y3R6xZK8pGYneLTA==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takahiro
Last Name: Hatakeda
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8999

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Operation in 5.15-5.35 GHz band is for indoor use only. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  -

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8116
Fax Number:  81-596-24-8095
E-mail:  Yoshihisa.Maeda@ul.com

Form App # 10 (2014-06-27)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: YN+DW5XdF5Hp5ltswVq7zw==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

TCB Information
TCB Application Email Address: info@ckccertification.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: Silex Technology America, Inc.
First Name: Ronald
Last Name: Tozaki
Line 1: 201 E. Sandpointe Avenue
Line 2:
Suite 245
City: Santa Ana
Country:
United States
Zip Code: 92707
Telephone Number:
801-748-1199

Extension:
Fax Number: 714-258-0730
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CKC Laboratories, Inc.
First Name:   Steve
Last Name:   Behm
Telephone Number: 714-993-6112 Extension: 221
Fax Number:  866-799-9776
E-mail:  reports@ckc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Michelle Branum
Title of authorized signature:  Administrative Assistant

Complete items below if agent signs the application:

Firm Name:  CKC Certification Services, LLC
Name:  Michelle Michelle Michelle
Line 1:  Michelle
Line 2:  Michelle
P.O. Box:  Michelle
City:  Michelle
State:  Michelle
Country:  Michelle
Zip Code:  Michelle
Telephone Number:  209-966-5240
Fax Number:  866-779-9776
E-mail:  info@ckccertification.com

Form App # 11 (2012-12-14)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Silex Technology, Inc.
FCC Registration Number (FRN): 0013616305
Alphanumeric FCC ID: N6CSXPCEAN
Unique Application Identifier: YRPX3enT3gFG8mJCfJsLhA==
Line one: 2-3-1 Hikaridai,Seika-cho Sourakugun
City: Kyoto
State: N/A
Country: Japan
Zip Code: 619-0237

Alternative Applicant Contact

Firm Name: UL Japan, Inc.
Name: Yoshinobu Asai
Applicant Title: Team Leader
Line one: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country: Japan
Zip Code: 516-0021

TCB Information

FCC ID
Grantee Code: N6C
Product Code: -SXPCEAN

Person at the applicant's address to receive grant or for contact
Name: Toshiro Kometani
Title: Manager
Telephone Number: 81 774-98-3781 Extension:
Fax Number: 81 774-98-3767
Email: kometani@silex.jp

Technical Contact
Firm Name: UL Japan, Inc.
First Name: Takahiro
Last Name: Hatakeda
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country:
Japan
Zip Code: 516-0021
Telephone Number:
81-596-24-8116

Extension:
Fax Number: 81-596-24-8124
E-Mail:

Non Technical Contact
Firm Name: UL Japan, Inc.
First Name: Yoshinobu
Last Name: Asai
Line 1: 4383-326 Asama-cho, Ise-shi
City: Mie-ken
Country: Japan
Zip Code: 516-0021
Telephone Number: 81-596-24-8116 Extension:
Fax Number: 81-596-24-8095
E-Mail: Yoshinobu.Asai@ul.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless LAN PCI Express Mini Card Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Head office EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  +81-596-24-8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshinobu Asai
Title of authorized signature:  Team Leader

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshinobu Yoshinobu Yoshinobu
Line 1:  Yoshinobu
Line 2:  Yoshinobu
P.O. Box:  Yoshinobu
City:  Yoshinobu
State:  Yoshinobu
Country:  Yoshinobu
Zip Code:  Yoshinobu
Telephone Number:  81-596-24-8116
Fax Number:  81-596-24-8095
E-mail:  Yoshinobu.Asai@ul.com

Applications are submitted for FCC ID and Grant requests. Click an above application to view details


© FCCID.io 2025