FCC ID PH3DJ-AXD1

PH3-DJ-AXD1, PH3 DJAXD1, PH3DJ-AXD1, PH3DJ-AXDI

Alinco Incorporated, Electronics Division VHF DIGITAL TRANSCEIVER

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: PH3DJ-AXD1 is . The remaining characters of the FCC ID, DJ-AXD1, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Alinco Incorporated, Electronics Division

Full Company Details: Alinco Incorporated, Electronics Division - PH3
Company Code: PH3
Address:
   Alinco Incorporated, Electronics Division
   Yodoyabashi Dai Building 13F 4-4-9 Koraibashi, Chuo-ku
   Osaka, N/A 541-0043
   Japan
App # Purpose Date Unique ID
1 Original Equipment 2017-04-04 6FVnNhC0n2d6F0XfSyYYuQ==

Approved Operating Frequencies

Line EntryFrequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes
1136-17450.65ppm12K5F1W9BD, EF
2136-17450.65ppm12K5F1D9BD, EF

Exhibits

All Available Documents

Document Type Submitted / Available
BOMParts List/Tune Up Info / Adobe Acrobat PDF (48 kB) 2017-04-04 /
External PhotosExternal Photos / Adobe Acrobat PDF (112 kB) 2017-04-04 / 2017-04-04
Test Setup PhotoTest Setup Photos / Adobe Acrobat PDF (109 kB) 2017-04-04 / 2017-04-04
label locationID Label/Location Info / Adobe Acrobat PDF (96 kB) 2017-04-04 / 2017-04-04
Test ReportTest Report / Adobe Acrobat PDF (1173 kB) 2017-04-04 / 2017-04-04
Circuit descriptionOperational Description / Adobe Acrobat PDF (44 kB) 2017-04-04 /
SAR ReportRF Exposure Info / Adobe Acrobat PDF (5002 kB) 2017-04-04 / 2017-04-04
Tune up ProcedureParts List/Tune Up Info / Adobe Acrobat PDF (6 kB) 2017-04-04 /
Frequency Attestation LetterAttestation Statements / Adobe Acrobat PDF (44 kB) 2017-04-04 / 2017-04-04
Long Term Confidentiality Request Letter-rev2Cover Letter(s) / Adobe Acrobat PDF (45 kB) 2017-04-04 / 2017-04-04
External PhotosExternal Photos / Adobe Acrobat PDF (112 kB) 2017-04-04 / 2017-04-04
Internal PhotoInternal Photos / Adobe Acrobat PDF (165 kB) 2017-04-04 / 2017-04-04
User manualUsers Manual / Adobe Acrobat PDF (5421 kB) 2017-04-04 / 2017-04-04
Long Term Confidentiality Request Letter-rev2Cover Letter(s) / Adobe Acrobat PDF (45 kB) 2017-04-04 / 2017-04-04
SAR ReportRF Exposure Info / Adobe Acrobat PDF (5002 kB) 2017-04-04 / 2017-04-04
Frequency Attestation LetterAttestation Statements / Adobe Acrobat PDF (44 kB) 2017-04-04 / 2017-04-04
LabelID Label/Location Info / Adobe Acrobat PDF (79 kB) 2017-04-04 / 2017-04-04
Agent Authorization LetterCover Letter(s) / Adobe Acrobat PDF (34 kB) 2017-04-04 / 2017-04-04
Agent Authorization LetterCover Letter(s) / Adobe Acrobat PDF (34 kB) 2017-04-04 / 2017-04-04
SCHSchematics / Adobe Acrobat PDF (241 kB) 2017-04-04 /
Internal PhotoInternal Photos / Adobe Acrobat PDF (165 kB) 2017-04-04 / 2017-04-04
Test Setup PhotoTest Setup Photos / Adobe Acrobat PDF (109 kB) 2017-04-04 / 2017-04-04
Block diagramBlock Diagram / Adobe Acrobat PDF (97 kB) 2017-04-04 /
label locationID Label/Location Info / Adobe Acrobat PDF (96 kB) 2017-04-04 / 2017-04-04
Test ReportTest Report / Adobe Acrobat PDF (1173 kB) 2017-04-04 / 2017-04-04
LabelID Label/Location Info / Adobe Acrobat PDF (79 kB) 2017-04-04 / 2017-04-04
User manualUsers Manual / Adobe Acrobat PDF (5421 kB) 2017-04-04 / 2017-04-04

APP # 1 (2017-04-04) Documents

BOM
 2017-04-04 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (48 kB)
External Photos
 2017-04-04 / 2017-04-04 External Photos / Adobe Acrobat PDF (112 kB)
Test Setup Photo
 2017-04-04 / 2017-04-04 Test Setup Photos / Adobe Acrobat PDF (109 kB)
label location
 2017-04-04 / 2017-04-04 ID Label/Location Info / Adobe Acrobat PDF (96 kB)
Test Report
 2017-04-04 / 2017-04-04 Test Report / Adobe Acrobat PDF (1173 kB)
Circuit description
 2017-04-04 / N/A Operational Description / Adobe Acrobat PDF (44 kB)
SAR Report
 2017-04-04 / 2017-04-04 RF Exposure Info / Adobe Acrobat PDF (5002 kB)
Tune up Procedure
 2017-04-04 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (6 kB)
Frequency Attestation Letter
 2017-04-04 / 2017-04-04 Attestation Statements / Adobe Acrobat PDF (44 kB)
Long Term Confidentiality Request Letter-rev2
 2017-04-04 / 2017-04-04 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
External Photos
 2017-04-04 / 2017-04-04 External Photos / Adobe Acrobat PDF (112 kB)
Internal Photo
 2017-04-04 / 2017-04-04 Internal Photos / Adobe Acrobat PDF (165 kB)
User manual
 2017-04-04 / 2017-04-04 Users Manual / Adobe Acrobat PDF (5421 kB)
Long Term Confidentiality Request Letter-rev2
 2017-04-04 / 2017-04-04 Cover Letter(s) / Adobe Acrobat PDF (45 kB)
SAR Report
 2017-04-04 / 2017-04-04 RF Exposure Info / Adobe Acrobat PDF (5002 kB)
Frequency Attestation Letter
 2017-04-04 / 2017-04-04 Attestation Statements / Adobe Acrobat PDF (44 kB)
Label
 2017-04-04 / 2017-04-04 ID Label/Location Info / Adobe Acrobat PDF (79 kB)
Agent Authorization Letter
 2017-04-04 / 2017-04-04 Cover Letter(s) / Adobe Acrobat PDF (34 kB)
Agent Authorization Letter
 2017-04-04 / 2017-04-04 Cover Letter(s) / Adobe Acrobat PDF (34 kB)
SCH
 2017-04-04 / N/A Schematics / Adobe Acrobat PDF (241 kB)
Internal Photo
 2017-04-04 / 2017-04-04 Internal Photos / Adobe Acrobat PDF (165 kB)
Test Setup Photo
 2017-04-04 / 2017-04-04 Test Setup Photos / Adobe Acrobat PDF (109 kB)
Block diagram
 2017-04-04 / N/A Block Diagram / Adobe Acrobat PDF (97 kB)
label location
 2017-04-04 / 2017-04-04 ID Label/Location Info / Adobe Acrobat PDF (96 kB)
Test Report
 2017-04-04 / 2017-04-04 Test Report / Adobe Acrobat PDF (1173 kB)
Label
 2017-04-04 / 2017-04-04 ID Label/Location Info / Adobe Acrobat PDF (79 kB)
User manual
 2017-04-04 / 2017-04-04 Users Manual / Adobe Acrobat PDF (5421 kB)

Grants

TCB Grant from App #1 (2017-04-04)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
 Date of Grant: 04/04/2017

Application Dated: 04/04/2017
Alinco Incorporated, Electronics Division
Yodoyabashi Dai Building 13F
4-4-9 Koraibashi, Chuo-ku
Osaka, 541-0043
Japan
 
Attention: Kazuhiro Kusuhara , General Manager, Production, Electronics Div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PH3DJ-AXD1
Name of Grantee:  Alinco Incorporated, Electronics Division
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: VHF DIGITAL TRANSCEIVER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD EF 90 136.0  -  174.0 5.0 0.65  PM 12K5F1W
BD EF 90 136.0  -  174.0 5.0 0.65  PM 12K5F1D

Power output listed is conducted. Output is at the antenna terminal of the device. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported head and body-worn accessory SAR values at 50% duty factor are 1.28 W/kg and 3.69 W/kg, respectively.

BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant from App #1 (2017-04-04)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Alinco Incorporated, Electronics Division
Yodoyabashi Dai Building 13F 4-4-9 Koraibashi, Chuo-ku
Osaka, 541-0043
Japan 		  Date of Grant: 04/04/2017

Application Dated: 04/04/2017
 
Attention: Kazuhiro Kusuhara , General Manager, Production, Electronics Div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PH3DJ-AXD1
Name of Grantee:  Alinco Incorporated, Electronics Division
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: VHF DIGITAL TRANSCEIVER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD EF 90 136.0  -  174.0 5.0 0.65  PM 12K5F1W
BD EF 90 136.0  -  174.0 5.0 0.65  PM 12K5F1D

Power output listed is conducted. Output is at the antenna terminal of the device. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported head and body-worn accessory SAR values at 50% duty factor are 1.28 W/kg and 3.69 W/kg, respectively.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To:


EA707838

Applications for this FCC ID

Form App # 1 (2017-04-04)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Alinco Incorporated, Electronics Division
FCC Registration Number (FRN): 0005192083
Alphanumeric FCC ID: PH3DJAXD1
Unique Application Identifier: 6FVnNhC0n2d6F0XfSyYYuQ==
Line one: Yodoyabashi Dai Building 13F
Line two: 4-4-9 Koraibashi, Chuo-ku
City: Osaka
State: N/A
Country: Japan
Zip Code: 541-0043

TCB Information
TCB Application Email Address: tcbinfo@metlabs.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: PH3
Product Code: DJ-AXD1

Person at the applicant's address to receive grant or for contact
Name: Kazuhiro Kusuhara
Title: General Manager, Production, Electronics Div.
Telephone Number: 06-7636-2360 Extension:
Fax Number: 06-6208-3801
Email: kusuhara@alinco.co.jp

Technical Contact
Firm Name: Most Technology Service Co.,Ltd.
First Name: Mark
Last Name: Wen
Line 1: No.5, 2nd Langshan Road, North District
Line 2:
Hi-tech Industrial Park
City: Shenzhen, Guangdong
Country:
China
Zip Code: 518057
Telephone Number:
86-755-86170306
Extension:
Fax Number: 86-755-86170310
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNF - Licensed Non-Broadcast Transmitter Held to Face
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): VHF DIGITAL TRANSCEIVER

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Most Technology Service Co., Ltd.
First Name:   Mark
Last Name:   Wen
Telephone Number: 86-755-86170306 Extension: 818
Fax Number:  86-755-86170310
E-mail:  szmost@szmost.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output listed is conducted. Output is at the antenna terminal of the device. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported head and body-worn accessory SAR values at 50% duty factor are 1.28 W/kg and 3.69 W/kg, respectively.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Kazuhiro Kusuhara
Title of authorized signature:  General Manager, Production, Electronics Div.

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

© FCCID.io 2025