FCC ID SWX-M2BW

SWXM2BW, SWX M2BW, SWX-M2BW

Ubiquiti Inc. BULLET M2

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: SWX-M2BW is . The remaining characters of the FCC ID, -M2BW, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Ubiquiti Inc.

Full Company Details: Ubiquiti Inc. - SWX
Company Code: SWX
Address:
   Ubiquiti Inc.
   685 Third Avenue
   New York, NY 10017
   United States
App # Purpose Date Unique ID
1 Class II Permissive Change 2018-02-27 aPcoVWJVacQ/CoY28SJ6Nw==
2 Original Equipment 2018-01-30 Pmyj/tAR61KnGfAlEoiXOA==

Approved Operating Frequencies

App # Frequency RangePower OutputRule Parts
1.12412.00000000-2462.000000000.004800015C
2.12412.00000000-2462.000000000.981700015C

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 Class II Permissive ChangeCover Letter(s) / Adobe Acrobat PDF (569 kB) 2018-02-23 / 2018-02-27
1 External PhotosExternal Photos / Adobe Acrobat PDF (1737 kB) 2018-02-23 / 2018-08-26
1 Test Report DTS WLAN Part 8Test Report / Adobe Acrobat PDF (5124 kB) 2018-02-23 / 2018-02-27
1 Test Report DTS WLAN Part 3Test Report / Adobe Acrobat PDF (5020 kB) 2018-02-23 / 2018-02-27
1 Confidentiality Request LTC STCCover Letter(s) / Adobe Acrobat PDF (360 kB) 2018-02-23 / 2018-02-27
1 Internal PhotosInternal Photos / Adobe Acrobat PDF (1550 kB) 2018-02-23 / 2018-08-26
1 Test Report DTS WLAN Part 9Test Report / Adobe Acrobat PDF (3433 kB) 2018-02-23 / 2018-02-27
1 Test Report DTS WLAN Part 4Test Report / Adobe Acrobat PDF (5034 kB) 2018-02-23 / 2018-02-27
1 POACover Letter(s) / Adobe Acrobat PDF (88 kB) 2018-02-23 / 2018-02-27
1 Test Setup Photos DTS WLANTest Setup Photos / Adobe Acrobat PDF (1327 kB) 2018-02-23 / 2018-08-26
1 Test Report RFExpRF Exposure Info / Adobe Acrobat PDF (320 kB) 2018-02-23 / 2018-02-27
1 Test Report DTS WLAN Part 5Test Report / Adobe Acrobat PDF (4998 kB) 2018-02-23 / 2018-02-27
1 Professional Installation DeclarationCover Letter(s) / Adobe Acrobat PDF (53 kB) 2018-02-23 / 2018-02-27
1 User Manual BM2-TiUsers Manual / Adobe Acrobat PDF (2316 kB) 2018-02-23 / 2018-08-26
1 Test Report DTS WLAN Part 6Test Report / Adobe Acrobat PDF (5115 kB) 2018-02-23 / 2018-02-27
1 Test Report DTS WLAN Part 1Test Report / Adobe Acrobat PDF (5040 kB) 2018-02-23 / 2018-02-27
1 User Manual BulletM2-HPUsers Manual / Adobe Acrobat PDF (1835 kB) 2018-02-23 / 2018-08-26
1 Test Report DTS WLAN Part 7Test Report / Adobe Acrobat PDF (5153 kB) 2018-02-23 / 2018-02-27
1 Test Report DTS WLAN Part 2Test Report / Adobe Acrobat PDF (5032 kB) 2018-02-23 / 2018-02-27
2 Label Info BM2-TiID Label/Location Info / Adobe Acrobat PDF (117 kB) 2018-01-26 / 2018-01-30
2 User Manual BM2-TiUsers Manual / Adobe Acrobat PDF (1908 kB) 2018-01-26 / 2018-07-29
2 Label Info BulletM2-HPID Label/Location Info / Adobe Acrobat PDF (107 kB) 2018-01-26 / 2018-01-30
2 User Manual BulletM2-HPUsers Manual / Adobe Acrobat PDF (2266 kB) 2018-01-26 / 2018-07-29
2 Test Report DTS WLAN Part 1Test Report / Adobe Acrobat PDF (5608 kB) 2018-01-26 / 2018-01-30
2 Declaration of function disabled (ch12&13)Cover Letter(s) / Adobe Acrobat PDF (85 kB) 2018-01-26 / 2018-01-30
2 External PhotosExternal Photos / Adobe Acrobat PDF (1737 kB) 2018-01-26 / 2018-07-29
2 Test Report DTS WLAN Part 2Test Report / Adobe Acrobat PDF (5676 kB) 2018-01-26 / 2018-01-30
2 Confidentiality Request LetterCover Letter(s) / Adobe Acrobat PDF (93 kB) 2018-01-26 / 2018-01-30
2 Internal PhotosInternal Photos / Adobe Acrobat PDF (1550 kB) 2018-01-26 / 2018-07-29
2 RF ExposureRF Exposure Info / Adobe Acrobat PDF (319 kB) 2018-01-26 / 2018-01-30
2 POACover Letter(s) / Adobe Acrobat PDF (88 kB) 2018-01-26 / 2018-01-30
2 Test Setup Photos DTS WLANTest Setup Photos / Adobe Acrobat PDF (647 kB) 2018-01-26 / 2018-07-29

APP # 1 (2018-02-27) Documents

Class II Permissive Change
 2018-02-23 / 2018-02-27 Cover Letter(s) / Adobe Acrobat PDF (569 kB)
Test Report DTS WLAN Part 4
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5034 kB)
POA
 2018-02-23 / 2018-02-27 Cover Letter(s) / Adobe Acrobat PDF (88 kB)
External Photos
 2018-02-23 / 2018-08-26 External Photos / Adobe Acrobat PDF (1737 kB)
Test Report DTS WLAN Part 8
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5124 kB)
Class II Permissive Change
 2018-02-23 / 2018-02-27 Cover Letter(s) / Adobe Acrobat PDF (569 kB)
Test Report RFExp
 2018-02-23 / 2018-02-27 RF Exposure Info / Adobe Acrobat PDF (320 kB)
Test Report DTS WLAN Part 3
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5020 kB)
Confidentiality Request LTC STC
 2018-02-23 / 2018-02-27 Cover Letter(s) / Adobe Acrobat PDF (360 kB)
Test Report DTS WLAN Part 5
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (4998 kB)
Professional Installation Declaration
 2018-02-23 / 2018-02-27 Cover Letter(s) / Adobe Acrobat PDF (53 kB)
Internal Photos
 2018-02-23 / 2018-08-26 Internal Photos / Adobe Acrobat PDF (1550 kB)
Test Report DTS WLAN Part 9
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (3433 kB)
Confidentiality Request LTC STC
 2018-02-23 / 2018-02-27 Cover Letter(s) / Adobe Acrobat PDF (360 kB)
Test Setup Photos DTS WLAN
 2018-02-23 / 2018-08-26 Test Setup Photos / Adobe Acrobat PDF (1327 kB)
Test Report DTS WLAN Part 4
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5034 kB)
POA
 2018-02-23 / 2018-02-27 Cover Letter(s) / Adobe Acrobat PDF (88 kB)
Test Report DTS WLAN Part 6
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5115 kB)
Test Report DTS WLAN Part 1
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5040 kB)
Test Setup Photos DTS WLAN
 2018-02-23 / 2018-08-26 Test Setup Photos / Adobe Acrobat PDF (1327 kB)
Test Report RFExp
 2018-02-23 / 2018-02-27 RF Exposure Info / Adobe Acrobat PDF (320 kB)
External Photos
 2018-02-23 / 2018-08-26 External Photos / Adobe Acrobat PDF (1737 kB)
Tune Up
 2018-02-23 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (50 kB)
Test Report DTS WLAN Part 5
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (4998 kB)
Test Report DTS WLAN Part 7
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5153 kB)
Professional Installation Declaration
 2018-02-23 / 2018-02-27 Cover Letter(s) / Adobe Acrobat PDF (53 kB)
Test Report DTS WLAN Part 2
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5032 kB)
User Manual BM2-Ti
 2018-02-23 / 2018-08-26 Users Manual / Adobe Acrobat PDF (2316 kB)
Internal Photos
 2018-02-23 / 2018-08-26 Internal Photos / Adobe Acrobat PDF (1550 kB)
User Manual BM2-Ti
 2018-02-23 / 2018-08-26 Users Manual / Adobe Acrobat PDF (2316 kB)
Test Report DTS WLAN Part 6
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5115 kB)
Test Report DTS WLAN Part 8
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5124 kB)
Test Report DTS WLAN Part 1
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5040 kB)
Test Report DTS WLAN Part 3
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5020 kB)
User Manual BulletM2-HP
 2018-02-23 / 2018-08-26 Users Manual / Adobe Acrobat PDF (1835 kB)
Operational Decription
 2018-02-23 / N/A Operational Description / Adobe Acrobat PDF (45 kB)
User Manual BulletM2-HP
 2018-02-23 / 2018-08-26 Users Manual / Adobe Acrobat PDF (1835 kB)
Test Report DTS WLAN Part 7
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5153 kB)
Test Report DTS WLAN Part 9
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (3433 kB)
Test Report DTS WLAN Part 2
 2018-02-23 / 2018-02-27 Test Report / Adobe Acrobat PDF (5032 kB)
Antenna Specification OpDes
 2018-02-23 / N/A Operational Description / Adobe Acrobat PDF (1216 kB)

APP # 2 (2018-01-30) Documents

RF Exposure
 2018-01-26 / 2018-01-30 RF Exposure Info / Adobe Acrobat PDF (319 kB)
Label Info BM2-Ti
 2018-01-26 / 2018-01-30 ID Label/Location Info / Adobe Acrobat PDF (117 kB)
Label Info BM2-Ti
 2018-01-26 / 2018-01-30 ID Label/Location Info / Adobe Acrobat PDF (117 kB)
User Manual BM2-Ti
 2018-01-26 / 2018-07-29 Users Manual / Adobe Acrobat PDF (1908 kB)
Block Diagram
 2018-01-26 / N/A Block Diagram / Adobe Acrobat PDF (29 kB)
User Manual BM2-Ti
 2018-01-26 / 2018-07-29 Users Manual / Adobe Acrobat PDF (1908 kB)
Schematics
 2018-01-26 / N/A Schematics / Adobe Acrobat PDF (200 kB)
Label Info BulletM2-HP
 2018-01-26 / 2018-01-30 ID Label/Location Info / Adobe Acrobat PDF (107 kB)
Label Info BulletM2-HP
 2018-01-26 / 2018-01-30 ID Label/Location Info / Adobe Acrobat PDF (107 kB)
User Manual BulletM2-HP
 2018-01-26 / 2018-07-29 Users Manual / Adobe Acrobat PDF (2266 kB)
Confidentiality Request Letter
 2018-01-26 / 2018-01-30 Cover Letter(s) / Adobe Acrobat PDF (93 kB)
User Manual BulletM2-HP
 2018-01-26 / 2018-07-29 Users Manual / Adobe Acrobat PDF (2266 kB)
Test Report DTS WLAN Part 1
 2018-01-26 / 2018-01-30 Test Report / Adobe Acrobat PDF (5608 kB)
Test Report DTS WLAN Part 1
 2018-01-26 / 2018-01-30 Test Report / Adobe Acrobat PDF (5608 kB)
Operational Description
 2018-01-26 / N/A Operational Description / Adobe Acrobat PDF (267 kB)
Declaration of function disabled (ch12&13)
 2018-01-26 / 2018-01-30 Cover Letter(s) / Adobe Acrobat PDF (85 kB)
External Photos
 2018-01-26 / 2018-07-29 External Photos / Adobe Acrobat PDF (1737 kB)
Declaration of function disabled (ch12&13)
 2018-01-26 / 2018-01-30 Cover Letter(s) / Adobe Acrobat PDF (85 kB)
Test Report DTS WLAN Part 2
 2018-01-26 / 2018-01-30 Test Report / Adobe Acrobat PDF (5676 kB)
Test Report DTS WLAN Part 2
 2018-01-26 / 2018-01-30 Test Report / Adobe Acrobat PDF (5676 kB)
Parts List
 2018-01-26 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (26 kB)
Confidentiality Request Letter
 2018-01-26 / 2018-01-30 Cover Letter(s) / Adobe Acrobat PDF (93 kB)
Internal Photos
 2018-01-26 / 2018-07-29 Internal Photos / Adobe Acrobat PDF (1550 kB)
External Photos
 2018-01-26 / 2018-07-29 External Photos / Adobe Acrobat PDF (1737 kB)
Test Setup Photos DTS WLAN
 2018-01-26 / 2018-07-29 Test Setup Photos / Adobe Acrobat PDF (647 kB)
RF Exposure
 2018-01-26 / 2018-01-30 RF Exposure Info / Adobe Acrobat PDF (319 kB)
POA
 2018-01-26 / 2018-01-30 Cover Letter(s) / Adobe Acrobat PDF (88 kB)
POA
 2018-01-26 / 2018-01-30 Cover Letter(s) / Adobe Acrobat PDF (88 kB)
Test Setup Photos DTS WLAN
 2018-01-26 / 2018-07-29 Test Setup Photos / Adobe Acrobat PDF (647 kB)
Internal Photos
 2018-01-26 / 2018-07-29 Internal Photos / Adobe Acrobat PDF (1550 kB)
Tune-Up Procedure
 2018-01-26 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (50 kB)

Grants

TCB Grant from App #1 (2018-02-27)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 02/27/2018

Application Dated: 02/23/2018
Ubiquiti Networks, Inc.
685 Third Avenue, 27th Floor
New York, NY 10017
 
Attention: Mark Feil , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-M2BW
Name of Grantee:  Ubiquiti Networks, Inc.
Equipment Class: Digital Transmission System
Notes: BULLET M2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.0048  

Class II Permissive Change. The following antennas were added to this device: AMO-2G10, Omni Antenna, 10 dBi gain; AMO-2G13, Omni Antenna, 13 dBi gain; AM-V2G-Ti, Sector Antenna, 15-17 dBi gain; RD-2G24, Dish Antenna, 24 dBi gain Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements.

EAS Grant from App #1 (2018-02-27)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Ubiquiti Networks, Inc.
685 Third Avenue, 27th Floor
New York, NY 10017
United States 		  Date of Grant: 02/27/2018

Application Dated: 02/23/2018
 
Attention: Mark Feil , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-M2BW
Name of Grantee:  Ubiquiti Networks, Inc.
Equipment Class: Digital Transmission System
Notes: BULLET M2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.0048  

Class II Permissive Change. The following antennas were added to this device: AMO-2G10, Omni Antenna, 10 dBi gain; AMO-2G13, Omni Antenna, 13 dBi gain; AM-V2G-Ti, Sector Antenna, 15-17 dBi gain; RD-2G24, Dish Antenna, 24 dBi gain Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements.



Mail To:


EA393016

TCB Grant from App #2 (2018-01-30)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 01/30/2018

Application Dated: 01/26/2018
Ubiquiti Networks, Inc.
685 Third Avenue, 27th Floor
New York, NY 10017
 
Attention: Mark Feil , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-M2BW
Name of Grantee:  Ubiquiti Networks, Inc.
Equipment Class: Digital Transmission System
Notes: BULLET M2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.9817  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements.

EAS Grant from App #2 (2018-01-30)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Ubiquiti Networks, Inc.
685 Third Avenue, 27th Floor
New York, NY 10017
United States 		  Date of Grant: 01/30/2018

Application Dated: 01/26/2018
 
Attention: Mark Feil , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-M2BW
Name of Grantee:  Ubiquiti Networks, Inc.
Equipment Class: Digital Transmission System
Notes: BULLET M2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.9817  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements.



Mail To:


EA961419

Applications for this FCC ID

Form App # 1 (2018-02-27)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ubiquiti Networks, Inc.
FCC Registration Number (FRN): 0012268215
Alphanumeric FCC ID: SWXM2BW
Unique Application Identifier: aPcoVWJVacQ/CoY28SJ6Nw==
Line one: 685 Third Avenue, 27th Floor
City: New York
State: New York
Country: United States
Zip Code: 10017

TCB Information
TCB Application Email Address: TEI@TIMCOENGR.COM
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: SWX
Product Code: -M2BW

Person at the applicant's address to receive grant or for contact
Name: Mark Feil
Title: Compliance Manager
Telephone Number: 408-942-3084 Extension:
Fax Number: 408-904-5255
Email: compliance@ubnt.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   08/26/2018
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): BULLET M2

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SPORTON International Inc.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-327-3456 Extension: 650
Fax Number:  886-3-327-0973
E-mail:  alex@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change. The following antennas were added to this device: AMO-2G10, Omni Antenna, 10 dBi gain; AMO-2G13, Omni Antenna, 13 dBi gain; AM-V2G-Ti, Sector Antenna, 15-17 dBi gain; RD-2G24, Dish Antenna, 24 dBi gain Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Willy Chen
Title of authorized signature:  Director

Form App # 2 (2018-01-30)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ubiquiti Networks, Inc.
FCC Registration Number (FRN): 0012268215
Alphanumeric FCC ID: SWXM2BW
Unique Application Identifier: Pmyj/tAR61KnGfAlEoiXOA==
Line one: 685 Third Avenue, 27th Floor
City: New York
State: New York
Country: United States
Zip Code: 10017

TCB Information
TCB Application Email Address: TEI@TIMCOENGR.COM
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: SWX
Product Code: -M2BW

Person at the applicant's address to receive grant or for contact
Name: Mark Feil
Title: Compliance Manager
Telephone Number: 408-942-3084 Extension:
Fax Number: 408-904-5255
Email: compliance@ubnt.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   07/29/2018
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): BULLET M2

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SPORTON International Inc.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-327-3456 Extension: 650
Fax Number:  886-3-327-0973
E-mail:  alex@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Willy Chen
Title of authorized signature:  Director

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

© FCCID.io 2025