FCC ID VUIDPC3929C

VUI-DPC3929C, VUI DPC3929C, VUIDPC3929C, VU1DPC3929C

PEGATRON CORPORATION Wireless cable modem

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: VUIDPC3929C is . The remaining characters of the FCC ID, DPC3929C, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

PEGATRON CORPORATION

Full Company Details: PEGATRON CORPORATION - VUI
Company Code: VUI
Address:
   PEGATRON CORPORATION
   5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
   TAIPEI CITY, N/A 11259
   Taiwan
App # Purpose Date Unique ID
1 Class II Permissive Change 2014-01-28 BW2IlfuJg8WtP7j9zPmuyg==
2 Original Equipment 2013-11-04 fO7QEIOReWeHSY2sf0SzIw==
3 Class II Permissive Change 2014-01-28 r9bIgarv55pWD3JDCRnD8w==
4 Original Equipment 2013-11-04 TpL584zQAdIObIBJxFhsmw==

Approved Operating Frequencies

App # Frequency RangePower OutputRule PartsGrant Notes
1.15180-52400.047115ECC, MO
1.25190-52300.047315ECC, MO
1.35210-52100.047615ECC, MO
2.12412-24620.55315CCC, MO
2.22422-24520.21815CCC, MO
2.35745-58250.59215CCC, MO
2.45755-57950.57315CCC, MO
2.55775-57750.53615CCC, MO
3.12412-24620.55315CCC, MO
3.22422-24520.21815CCC, MO
3.35745-58250.59215CCC, MO
3.45755-57950.57315CCC, MO
3.55775-57750.53615CCC, MO
4.15180-52400.047115ECC, MO
4.25190-52300.047315ECC, MO
4.35210-52100.047615ECC, MO

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 Internal PhotosInternal Photos / Adobe Acrobat PDF (1708 kB) 2014-01-28 / 2014-01-28
1 Label infoID Label/Location Info / Adobe Acrobat PDF (153 kB) 2014-01-28 / 2014-01-28
1 Class II Change LetterCover Letter(s) / Adobe Acrobat PDF (36 kB) 2014-01-28 / 2014-01-28
1 POACover Letter(s) / Adobe Acrobat PDF (20 kB) 2014-01-28 / 2014-01-28
1 Confidentially LetterCover Letter(s) / Adobe Acrobat PDF (23 kB) 2014-01-28 / 2014-01-28
1 Test PhotosTest Setup Photos / Adobe Acrobat PDF (291 kB) 2014-01-28 / 2014-01-28
1 External PhotosExternal Photos / Adobe Acrobat PDF (345 kB) 2014-01-28 / 2014-01-28
1 User ManualUsers Manual / Adobe Acrobat PDF (1605 kB) 2014-01-28 / 2014-01-28
1 Test ReportTest Report / Adobe Acrobat PDF (652 kB) 2014-01-28 / 2014-01-28
2 tes setup photosTest Setup Photos / Adobe Acrobat PDF (366 kB) 2013-11-04 / 2013-11-04
2 ext photosExternal Photos / Adobe Acrobat PDF (505 kB) 2013-11-04 / 2013-11-04
2 Test reportTest Report / Adobe Acrobat PDF (4228 kB) 2013-11-04 / 2013-11-04
2 MPERF Exposure Info / Adobe Acrobat PDF (101 kB) 2013-11-04 / 2013-11-04
2 user manualUsers Manual / Adobe Acrobat PDF (1540 kB) 2013-11-04 / 2013-11-04
2 Int PhotosInternal Photos / Adobe Acrobat PDF (1255 kB) 2013-11-04 / 2013-11-04
2 PoA from ciscoCover Letter(s) / Adobe Acrobat PDF (32 kB) 2013-11-04 / 2013-11-04
2 labelID Label/Location Info / Adobe Acrobat PDF (149 kB) 2013-11-04 / 2013-11-04
2 colocation reportTest Report / Adobe Acrobat PDF (110 kB) 2013-11-04 / 2013-11-04
2 PoACover Letter(s) / Adobe Acrobat PDF (173 kB) 2013-11-04 / 2013-11-04
2 LTC requestCover Letter(s) / Adobe Acrobat PDF (187 kB) 2013-11-04 / 2013-11-04
3 Test PhotosTest Setup Photos / Adobe Acrobat PDF (291 kB) 2014-01-28 / 2014-01-28
3 External PhotosExternal Photos / Adobe Acrobat PDF (345 kB) 2014-01-28 / 2014-01-28
3 User ManualUsers Manual / Adobe Acrobat PDF (1605 kB) 2014-01-28 / 2014-01-28
3 Test ReportTest Report / Adobe Acrobat PDF (670 kB) 2014-01-28 / 2014-01-28
3 Internal PhotosInternal Photos / Adobe Acrobat PDF (1708 kB) 2014-01-28 / 2014-01-28
3 Label infoID Label/Location Info / Adobe Acrobat PDF (153 kB) 2014-01-28 / 2014-01-28
3 Class II Change LetterCover Letter(s) / Adobe Acrobat PDF (36 kB) 2014-01-28 / 2014-01-28
3 POACover Letter(s) / Adobe Acrobat PDF (20 kB) 2014-01-28 / 2014-01-28
3 Confidentially LetterCover Letter(s) / Adobe Acrobat PDF (23 kB) 2014-01-28 / 2014-01-28
4 Poa from CiscoCover Letter(s) / Adobe Acrobat PDF (32 kB) 2013-11-04 / 2013-11-04
4 LabelID Label/Location Info / Adobe Acrobat PDF (149 kB) 2013-11-04 / 2013-11-04
4 coloation reportTest Report / Adobe Acrobat PDF (110 kB) 2013-11-04 / 2013-11-04
4 PoACover Letter(s) / Adobe Acrobat PDF (173 kB) 2013-11-04 / 2013-11-04
4 LTC requestCover Letter(s) / Adobe Acrobat PDF (187 kB) 2013-11-04 / 2013-11-04
4 test setup photosTest Setup Photos / Adobe Acrobat PDF (366 kB) 2013-11-04 / 2013-11-04
4 Ext photosExternal Photos / Adobe Acrobat PDF (505 kB) 2013-11-04 / 2013-11-04
4 Test reportTest Report / Adobe Acrobat PDF (2403 kB) 2013-11-04 / 2013-11-04
4 MPERF Exposure Info / Adobe Acrobat PDF (101 kB) 2013-11-04 / 2013-11-04
4 user manualUsers Manual / Adobe Acrobat PDF (1540 kB) 2013-11-04 / 2013-11-04
4 Int PhotosInternal Photos / Adobe Acrobat PDF (1255 kB) 2013-11-04 / 2013-11-04

APP # 1 (2014-01-28) Documents

Internal Photos
 2014-01-28 / 2014-01-28 Internal Photos / Adobe Acrobat PDF (1708 kB)
User Manual
 2014-01-28 / 2014-01-28 Users Manual / Adobe Acrobat PDF (1605 kB)
Label info
 2014-01-28 / 2014-01-28 ID Label/Location Info / Adobe Acrobat PDF (153 kB)
Block Diagram
 2014-01-28 / N/A Block Diagram / Adobe Acrobat PDF (97 kB)
Label info
 2014-01-28 / 2014-01-28 ID Label/Location Info / Adobe Acrobat PDF (153 kB)
Class II Change Letter
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (36 kB)
POA
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (20 kB)
Class II Change Letter
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (36 kB)
POA
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (20 kB)
Confidentially Letter
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (23 kB)
Schematic
 2014-01-28 / N/A Schematics / Adobe Acrobat PDF (916 kB)
Confidentially Letter
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (23 kB)
Test Photos
 2014-01-28 / 2014-01-28 Test Setup Photos / Adobe Acrobat PDF (291 kB)
External Photos
 2014-01-28 / 2014-01-28 External Photos / Adobe Acrobat PDF (345 kB)
Test Photos
 2014-01-28 / 2014-01-28 Test Setup Photos / Adobe Acrobat PDF (291 kB)
External Photos
 2014-01-28 / 2014-01-28 External Photos / Adobe Acrobat PDF (345 kB)
User Manual
 2014-01-28 / 2014-01-28 Users Manual / Adobe Acrobat PDF (1605 kB)
Test Report
 2014-01-28 / 2014-01-28 Test Report / Adobe Acrobat PDF (652 kB)
Test Report
 2014-01-28 / 2014-01-28 Test Report / Adobe Acrobat PDF (652 kB)
Internal Photos
 2014-01-28 / 2014-01-28 Internal Photos / Adobe Acrobat PDF (1708 kB)

APP # 2 (2013-11-04) Documents

tes setup photos
 2013-11-04 / 2013-11-04 Test Setup Photos / Adobe Acrobat PDF (366 kB)
MPE
 2013-11-04 / 2013-11-04 RF Exposure Info / Adobe Acrobat PDF (101 kB)
tes setup photos
 2013-11-04 / 2013-11-04 Test Setup Photos / Adobe Acrobat PDF (366 kB)
colocation report
 2013-11-04 / 2013-11-04 Test Report / Adobe Acrobat PDF (110 kB)
ext photos
 2013-11-04 / 2013-11-04 External Photos / Adobe Acrobat PDF (505 kB)
Test report
 2013-11-04 / 2013-11-04 Test Report / Adobe Acrobat PDF (4228 kB)
operational description
 2013-11-04 / N/A Operational Description / Adobe Acrobat PDF (195 kB)
Test report
 2013-11-04 / 2013-11-04 Test Report / Adobe Acrobat PDF (4228 kB)
ext photos
 2013-11-04 / 2013-11-04 External Photos / Adobe Acrobat PDF (505 kB)
MPE
 2013-11-04 / 2013-11-04 RF Exposure Info / Adobe Acrobat PDF (101 kB)
user manual
 2013-11-04 / 2013-11-04 Users Manual / Adobe Acrobat PDF (1540 kB)
PoA
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (173 kB)
user manual
 2013-11-04 / 2013-11-04 Users Manual / Adobe Acrobat PDF (1540 kB)
Int Photos
 2013-11-04 / 2013-11-04 Internal Photos / Adobe Acrobat PDF (1255 kB)
Int Photos
 2013-11-04 / 2013-11-04 Internal Photos / Adobe Acrobat PDF (1255 kB)
PoA from cisco
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (32 kB)
PoA from cisco
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (32 kB)
label
 2013-11-04 / 2013-11-04 ID Label/Location Info / Adobe Acrobat PDF (149 kB)
label
 2013-11-04 / 2013-11-04 ID Label/Location Info / Adobe Acrobat PDF (149 kB)
colocation report
 2013-11-04 / 2013-11-04 Test Report / Adobe Acrobat PDF (110 kB)
schematics
 2013-11-04 / N/A Schematics / Adobe Acrobat PDF (891 kB)
LTC request
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (187 kB)
PoA
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (173 kB)
block diagram
 2013-11-04 / N/A Block Diagram / Adobe Acrobat PDF (107 kB)
LTC request
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (187 kB)

APP # 3 (2014-01-28) Documents

Confidentially Letter
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (23 kB)
Test Photos
 2014-01-28 / 2014-01-28 Test Setup Photos / Adobe Acrobat PDF (291 kB)
External Photos
 2014-01-28 / 2014-01-28 External Photos / Adobe Acrobat PDF (345 kB)
Test Photos
 2014-01-28 / 2014-01-28 Test Setup Photos / Adobe Acrobat PDF (291 kB)
External Photos
 2014-01-28 / 2014-01-28 External Photos / Adobe Acrobat PDF (345 kB)
User Manual
 2014-01-28 / 2014-01-28 Users Manual / Adobe Acrobat PDF (1605 kB)
Test Report
 2014-01-28 / 2014-01-28 Test Report / Adobe Acrobat PDF (670 kB)
Test Report
 2014-01-28 / 2014-01-28 Test Report / Adobe Acrobat PDF (670 kB)
Internal Photos
 2014-01-28 / 2014-01-28 Internal Photos / Adobe Acrobat PDF (1708 kB)
Internal Photos
 2014-01-28 / 2014-01-28 Internal Photos / Adobe Acrobat PDF (1708 kB)
User Manual
 2014-01-28 / 2014-01-28 Users Manual / Adobe Acrobat PDF (1605 kB)
Label info
 2014-01-28 / 2014-01-28 ID Label/Location Info / Adobe Acrobat PDF (153 kB)
Label info
 2014-01-28 / 2014-01-28 ID Label/Location Info / Adobe Acrobat PDF (153 kB)
Block Diagram
 2014-01-28 / N/A Block Diagram / Adobe Acrobat PDF (97 kB)
Class II Change Letter
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (36 kB)
POA
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (20 kB)
POA
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (20 kB)
Class II Change Letter
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (36 kB)
Confidentially Letter
 2014-01-28 / 2014-01-28 Cover Letter(s) / Adobe Acrobat PDF (23 kB)
Schematic
 2014-01-28 / N/A Schematics / Adobe Acrobat PDF (916 kB)

APP # 4 (2013-11-04) Documents

Poa from Cisco
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (32 kB)
Poa from Cisco
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (32 kB)
Label
 2013-11-04 / 2013-11-04 ID Label/Location Info / Adobe Acrobat PDF (149 kB)
Label
 2013-11-04 / 2013-11-04 ID Label/Location Info / Adobe Acrobat PDF (149 kB)
coloation report
 2013-11-04 / 2013-11-04 Test Report / Adobe Acrobat PDF (110 kB)
schematics
 2013-11-04 / N/A Schematics / Adobe Acrobat PDF (891 kB)
LTC request
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (187 kB)
PoA
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (173 kB)
block diagram
 2013-11-04 / N/A Block Diagram / Adobe Acrobat PDF (107 kB)
LTC request
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (187 kB)
Test report
 2013-11-04 / 2013-11-04 Test Report / Adobe Acrobat PDF (2403 kB)
test setup photos
 2013-11-04 / 2013-11-04 Test Setup Photos / Adobe Acrobat PDF (366 kB)
MPE
 2013-11-04 / 2013-11-04 RF Exposure Info / Adobe Acrobat PDF (101 kB)
coloation report
 2013-11-04 / 2013-11-04 Test Report / Adobe Acrobat PDF (110 kB)
Ext photos
 2013-11-04 / 2013-11-04 External Photos / Adobe Acrobat PDF (505 kB)
test setup photos
 2013-11-04 / 2013-11-04 Test Setup Photos / Adobe Acrobat PDF (366 kB)
Test report
 2013-11-04 / 2013-11-04 Test Report / Adobe Acrobat PDF (2403 kB)
operational description
 2013-11-04 / N/A Operational Description / Adobe Acrobat PDF (195 kB)
Ext photos
 2013-11-04 / 2013-11-04 External Photos / Adobe Acrobat PDF (505 kB)
MPE
 2013-11-04 / 2013-11-04 RF Exposure Info / Adobe Acrobat PDF (101 kB)
user manual
 2013-11-04 / 2013-11-04 Users Manual / Adobe Acrobat PDF (1540 kB)
PoA
 2013-11-04 / 2013-11-04 Cover Letter(s) / Adobe Acrobat PDF (173 kB)
user manual
 2013-11-04 / 2013-11-04 Users Manual / Adobe Acrobat PDF (1540 kB)
Int Photos
 2013-11-04 / 2013-11-04 Internal Photos / Adobe Acrobat PDF (1255 kB)
Int Photos
 2013-11-04 / 2013-11-04 Internal Photos / Adobe Acrobat PDF (1255 kB)

Grants

TCB Grant from App #1 (2014-01-28)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 01/28/2014

Application Dated: 01/28/2014
PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIDPC3929C
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless cable modem
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0471  
CC MO 15E 5190.0  -  5230.0 0.0473  
CC MO 15E 5210.0  -  5210.0 0.0476  

Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only.

The Class II Permissive Change covers the performed modifications as documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #1 (2014-01-28)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan 		  Date of Grant: 01/28/2014

Application Dated: 01/28/2014
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIDPC3929C
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless cable modem
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0471  
CC MO 15E 5190.0  -  5230.0 0.0473  
CC MO 15E 5210.0  -  5210.0 0.0476  

Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only.

The Class II Permissive Change covers the performed modifications as documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA614105

TCB Grant from App #2 (2013-11-04)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 11/04/2013

Application Dated: 11/04/2013
PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIDPC3929C
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Digital Transmission System
Notes: Wireless cable modem
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.553  
CC MO 15C 2422.0  -  2452.0 0.218  
CC MO 15C 5745.0  -  5825.0 0.592  
CC MO 15C 5755.0  -  5795.0 0.573  
CC MO 15C 5775.0  -  5775.0 0.536  

Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #2 (2013-11-04)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan 		  Date of Grant: 11/04/2013

Application Dated: 11/04/2013
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIDPC3929C
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Digital Transmission System
Notes: Wireless cable modem
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.553  
CC MO 15C 2422.0  -  2452.0 0.218  
CC MO 15C 5745.0  -  5825.0 0.592  
CC MO 15C 5755.0  -  5795.0 0.573  
CC MO 15C 5775.0  -  5775.0 0.536  

Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA800318

TCB Grant from App #3 (2014-01-28)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 01/28/2014

Application Dated: 01/28/2014
PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIDPC3929C
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Digital Transmission System
Notes: Wireless cable modem
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.553  
CC MO 15C 2422.0  -  2452.0 0.218  
CC MO 15C 5745.0  -  5825.0 0.592  
CC MO 15C 5755.0  -  5795.0 0.573  
CC MO 15C 5775.0  -  5775.0 0.536  

Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode.

The Class II Permissive Change covers the performed modifications as documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #3 (2014-01-28)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan 		  Date of Grant: 01/28/2014

Application Dated: 01/28/2014
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIDPC3929C
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Digital Transmission System
Notes: Wireless cable modem
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.553  
CC MO 15C 2422.0  -  2452.0 0.218  
CC MO 15C 5745.0  -  5825.0 0.592  
CC MO 15C 5755.0  -  5795.0 0.573  
CC MO 15C 5775.0  -  5775.0 0.536  

Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode.

The Class II Permissive Change covers the performed modifications as documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA937554

TCB Grant from App #4 (2013-11-04)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 11/04/2013

Application Dated: 11/04/2013
PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIDPC3929C
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless cable modem
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0471  
CC MO 15E 5190.0  -  5230.0 0.0473  
CC MO 15E 5210.0  -  5210.0 0.0476  

Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant from App #4 (2013-11-04)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan 		  Date of Grant: 11/04/2013

Application Dated: 11/04/2013
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIDPC3929C
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless cable modem
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0471  
CC MO 15E 5190.0  -  5230.0 0.0473  
CC MO 15E 5210.0  -  5210.0 0.0476  

Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA732536

Applications for this FCC ID

Form App # 1 (2014-01-28)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: PEGATRON CORPORATION
FCC Registration Number (FRN): 0020241758
Alphanumeric FCC ID: VUIDPC3929C
Unique Application Identifier: BW2IlfuJg8WtP7j9zPmuyg==
Line one: 5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
City: TAIPEI CITY
State: N/A
Country: Taiwan
Zip Code: 11259

TCB Information
TCB Application Email Address: Brandhorst.dirk@phoenix-testlab.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: VUI
Product Code: DPC3929C

Person at the applicant's address to receive grant or for contact
Name: Jamescz Wang
Title: Deputy Director
Telephone Number: 886-2-81439001 Extension: 31483
Fax Number: 886-2-28960017
Email: jamescz_wang@pegatroncorp.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless cable modem

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SPORTON International Inc.
First Name:   Leo
Last Name:   Huang
Telephone Number: 886-3-6569065 Extension: 666
Fax Number:  886-3-6569085
E-mail:  leohuang@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. The Class II Permissive Change covers the performed modifications as documented in this filing.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Leo Huang
Title of authorized signature: 

Form App # 2 (2013-11-04)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: PEGATRON CORPORATION
FCC Registration Number (FRN): 0020241758
Alphanumeric FCC ID: VUIDPC3929C
Unique Application Identifier: fO7QEIOReWeHSY2sf0SzIw==
Line one: 5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
City: TAIPEI CITY
State: N/A
Country: Taiwan
Zip Code: 11259

TCB Information
TCB Application Email Address: Brandhorst.dirk@phoenix-testlab.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: VUI
Product Code: DPC3929C

Person at the applicant's address to receive grant or for contact
Name: Jamescz Wang
Title: Deputy Director
Telephone Number: 886-2-81439001 Extension: 31483
Fax Number: 886-2-28960017
Email: jamescz_wang@pegatroncorp.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless cable modem

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sporton International Inc.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-327-3456 Extension: 650
Fax Number:  886-3-327-0973
E-mail:  alex@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Leo Huang
Title of authorized signature: 

Complete items below if agent signs the application:

Firm Name:  Sporton Int. Inc
Name:  Leo Leo Leo
Line 1:  Leo
Line 2:  Leo
P.O. Box:  Leo
City:  Leo
State:  Leo
Country:  Leo
Zip Code:  Leo
Telephone Number:  88636569065 Extension:  666
Fax Number:  88636569085
E-mail:  leohuang@sporton.com.tw

Form App # 3 (2014-01-28)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: PEGATRON CORPORATION
FCC Registration Number (FRN): 0020241758
Alphanumeric FCC ID: VUIDPC3929C
Unique Application Identifier: r9bIgarv55pWD3JDCRnD8w==
Line one: 5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
City: TAIPEI CITY
State: N/A
Country: Taiwan
Zip Code: 11259

TCB Information
TCB Application Email Address: Brandhorst.dirk@phoenix-testlab.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: VUI
Product Code: DPC3929C

Person at the applicant's address to receive grant or for contact
Name: Jamescz Wang
Title: Deputy Director
Telephone Number: 886-2-81439001 Extension: 31483
Fax Number: 886-2-28960017
Email: jamescz_wang@pegatroncorp.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless cable modem

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SPORTON International Inc.
First Name:   Leo
Last Name:   Huang
Telephone Number: 886-3-6569065 Extension: 666
Fax Number:  886-3-6569085
E-mail:  leohuang@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. The Class II Permissive Change covers the performed modifications as documented in this filing.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Leo Huang
Title of authorized signature: 

Form App # 4 (2013-11-04)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: PEGATRON CORPORATION
FCC Registration Number (FRN): 0020241758
Alphanumeric FCC ID: VUIDPC3929C
Unique Application Identifier: TpL584zQAdIObIBJxFhsmw==
Line one: 5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
City: TAIPEI CITY
State: N/A
Country: Taiwan
Zip Code: 11259

TCB Information
TCB Application Email Address: Brandhorst.dirk@phoenix-testlab.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: VUI
Product Code: DPC3929C

Person at the applicant's address to receive grant or for contact
Name: Jamescz Wang
Title: Deputy Director
Telephone Number: 886-2-81439001 Extension: 31483
Fax Number: 886-2-28960017
Email: jamescz_wang@pegatroncorp.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless cable modem

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sporton International Inc.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-327-3456 Extension: 650
Fax Number:  886-3-327-0973
E-mail:  alex@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output Power listed is the maximum (single part or combined) conducted output power as indicated in the filing. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. Endusers must be provided with the transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Leo Huang
Title of authorized signature: 

Complete items below if agent signs the application:

Firm Name:  Sporton Int In
Name:  Leo Leo Leo
Line 1:  Leo
Line 2:  Leo
P.O. Box:  Leo
City:  Leo
State:  Leo
Country:  Leo
Zip Code:  Leo
Telephone Number:  88636569065 Extension:  666
Fax Number:  88636569085
E-mail:  leohuang@sporton.com.tw

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

© FCCID.io 2025