1. FCC ID
  2. WT8
  3. WT8DNWAP62

FCC ID WT8DNWAP62

WiFi Access Point

by Datto, Inc.

Grantee Code: WT8   Product Code: DNWAP62
Latest application date: 2019-09-04

FCC ID Device Details

FCC IDWT8DNWAP62
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWT8
Product CodeDNWAP62
Applicant BusinessDatto, Inc. 🇺🇸
Related Domains datto.com
Equipment ClassWiFi Access Point
Test FirmCTC advanced GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-09-04
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-07-23
5180-5240 MHzOriginal Equipment2018-06-12
2412-2462 MHzOriginal Equipment2018-06-12

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2019-09-04PDF 412 KB
Users Manual-GuideUsers Manual2018-07-23PDF 1.3 MB
Users Manual-QSG-A62Users Manual2018-07-23PDF 3.3 MB
Users Manual-QSG-AP62Users Manual2018-07-23PDF 1.5 MB
Users Manual-Website contentsUsers Manual2018-07-23PDF 1.7 MB
User Manual-A62Users Manual2018-06-12PDF 3.2 MB
User Manual-AP62Users Manual2018-06-12PDF 1.5 MB
User Manual-Website contentsUsers Manual2018-06-12PDF 236 KB
Users Manual-A62Users Manual2018-06-12PDF 3.2 MB
Users Manual-AP62Users Manual2018-06-12PDF 1.5 MB
Users Manual-Website contentsUsers Manual2018-06-12PDF 236 KB
Internal PhotosInternal Photos2019-09-04PDF 1,019.5 KB
Internal PhotosInternal Photos2018-06-12PDF 1.3 MB
External PhotosExternal Photos2019-09-04PDF 369.9 KB
External PhotosExternal Photos2018-06-12PDF 452.9 KB
ID LabelID Label/Location Info2019-09-04PDF 710.3 KB
Label and Label Location-A62ID Label/Location Info2018-06-12PDF 344.3 KB
Label and Label Location-AP62ID Label/Location Info2018-06-12PDF 321.3 KB
Test Setup Photos DFS TestsTest Setup Photos2019-09-04PDF 552.8 KB
RF Test set-up photosTest Setup Photos2018-07-23PDF 790.1 KB
RF Test Set-up PhotosTest Setup Photos2018-06-12PDF 734.4 KB
RF Test set-up photosTest Setup Photos2018-06-12PDF 774.3 KB
DFS Test ReportTest Report2019-09-04PDF 2.2 MB
DFS Test Report AnnexI U-NII-2A-Band Part 1Test Report2019-09-04PDF 2.4 MB
DFS Test Report AnnexI U-NII-2A-Band Part 2Test Report2019-09-04PDF 2.3 MB
DFS Test Report AnnexI U-NII-2C-Band Part 1Test Report2019-09-04PDF 1.8 MB
DFS Test Report AnnexI U-NII-2C-Band Part 2Test Report2019-09-04PDF 1.7 MB
RF Report WLAN Part 1Test Report2019-09-04PDF 5.5 MB
RF Report WLAN Part 2Test Report2019-09-04PDF 5.2 MB
RF Report WLAN Part 3Test Report2019-09-04PDF 5.7 MB
RF Test Report-1Test Report2018-07-23PDF 4 MB
RF Test Report-2Test Report2018-07-23PDF 5.1 MB
RF Test Report-1Test Report2018-06-12PDF 5.5 MB
RF Test Report-1Test Report2018-06-12PDF 5.6 MB
RF Test Report-2Test Report2018-06-12PDF 5.3 MB
RF Test Report-2Test Report2018-06-12PDF 5.6 MB
RF Test Report-3Test Report2018-06-12PDF 5.2 MB
RF Test Report-3Test Report2018-06-12PDF 1.1 MB
RF Test Report-4Test Report2018-06-12PDF 5.2 MB
RF Test Report-5Test Report2018-06-12PDF 5.5 MB
Class 2 Permissive Change Request LetterCover Letter(s)2019-09-04PDF 26.1 KB
FCC confidentiality request permanentCover Letter(s)2019-09-04PDF 16.2 KB
Authorization LetterCover Letter(s)2018-07-23PDF 256.8 KB
Class II Permissive change letterCover Letter(s)2018-07-23PDF 185.2 KB
LTC LetterCover Letter(s)2018-07-23PDF 250.6 KB
Authorization LetterCover Letter(s)2018-06-12PDF 252.5 KB
DTS Channel 12&13 Description letterCover Letter(s)2018-06-12PDF 51.8 KB
Family model letterCover Letter(s)2018-06-12PDF 262.9 KB
LTC LetterCover Letter(s)2018-06-12PDF 248.9 KB
RF exposureRF Exposure Info2019-09-04PDF 906.4 KB
RF Exposure ReportRF Exposure Info2018-06-12PDF 1,011.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 745.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 827.1 KB
Schematics Metadata onlySchematicsPDF 2.6 MB
Operational Description Metadata onlyOperational DescriptionPDF 33.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 193.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 212 KB
Operational Description-Antenna Metadata onlyOperational DescriptionPDF 1.3 MB
SW operational description Metadata onlyOperational DescriptionPDF 99.2 KB
Software Security for UNII Devices Metadata onlyOperational DescriptionPDF 273 KB

Application Information

Application IDbq/JIPCKFM7sQxEV4Vv+Zg==
Final Action Date2019-09-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0026323543
ModelDNWAP62
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWiFi Access Point
Responsible PartyBenjamin Townsend, Senior Compliance Analyst, Btownsend@datto.com , 8882946312
Test FirmGerald Schmidt, CTC advanced GmbH, mail@ctcadvanced.com , 49-681-598-0
TCB EmailTCB@ctcadvanced.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsC2PC to add the bands 5250-5350 MHz, 5470-5600 MHz and 5650-5725 MHz with DFS Master functionality and add 160 MHz bandwidth in the band 5150-5350 MHz. Device is indoor use access point for NII-1 band. Professional installation required. Power output listed is conducted. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Outdoor use condition for NII-1 band with lower output power. Device is PTMP equipment and must meet EIRP requirement for above 30 degree elevation angle.

Applications

Application IDDatePurpose
bq/JIPCKFM7sQxEV4Vv+Zg==2019-09-04Class II permissive change or modification of presently authorized equipment
4bjYMrhKG0jaBZ+dvM/Lsg==2018-07-23Class II permissive change or modification of presently authorized equipment
nO4+Z8oSsGg436YCxroPhA==2018-06-12Original Equipment
JVXsUtQpzfbLt7ue/d8hCQ==2018-06-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.521000015CCC, MO
5180-5240 MHz0.2215ECC, MO
5210-5290 MHz0.07915E
5260-5320 MHz0.15115E38, CC, MO
5270-5310 MHz0.18215E
5290 MHz0.11515E
5290 MHz0.05915E
5500-5580 MHz0.1415E38, CC, MO
5500-5580 MHz0.1315E
5510-5550 MHz0.1415E
5530 MHz0.12915E
5660-5700 MHz0.1215E
5660-5700 MHz0.13415E38, CC, MO
5670 MHz0.13615E
5745-5825 MHz0.20715E38, CC, MO
5745-5825 MHz0.20715ECC, MO

Grants

TCB Grant - Application nO4+Z8oSsGg436YCxroPhA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 06/12/2018

Application Dated: 06/12/2018
Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8DNWAP62
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.22  
CC MO 15E 5745.0  -  5825.0 0.207  

Device is indoor use access point for NII-1 band. Professional installation required. Power output listed is conducted. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application nO4+Z8oSsGg436YCxroPhA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
United States 		  Date of Grant: 06/12/2018

Application Dated: 06/12/2018
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8DNWAP62
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.22  
CC MO 15E 5745.0  -  5825.0 0.207  

Device is indoor use access point for NII-1 band. Professional installation required. Power output listed is conducted. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application JVXsUtQpzfbLt7ue/d8hCQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 06/12/2018

Application Dated: 06/11/2018
Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8DNWAP62
Name of Grantee:  Datto, Inc.
Equipment Class: Digital Transmission System
Notes: WiFi Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.521  

Professional installation required. Power output listed is conducted. Device contains 20/40MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application JVXsUtQpzfbLt7ue/d8hCQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
United States 		  Date of Grant: 06/12/2018

Application Dated: 06/11/2018
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8DNWAP62
Name of Grantee:  Datto, Inc.
Equipment Class: Digital Transmission System
Notes: WiFi Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.521  

Professional installation required. Power output listed is conducted. Device contains 20/40MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application bq/JIPCKFM7sQxEV4Vv+Zg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CTC advanced GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany 		Date of Grant: 09/04/2019

Application Dated: 07/04/2019
Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8DNWAP62
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.22  
38 CC MO 15E 5260.0  -  5320.0 0.151  
15E 5270.0  -  5310.0 0.182  
15E 5290.0  -  5290.0 0.115  
15E 5210.0  -  5290.0 0.079  
15E 5500.0  -  5580.0 0.13  
15E 5510.0  -  5550.0 0.14  
15E 5530.0  -  5530.0 0.129  
15E 5290.0  -  5290.0 0.059  
15E 5660.0  -  5700.0 0.12  
15E 5670.0  -  5670.0 0.136  
38 CC MO 15E 5500.0  -  5580.0 0.14  
38 CC MO 15E 5660.0  -  5700.0 0.134  
38 CC MO 15E 5745.0  -  5825.0 0.207  

C2PC to add the bands 5250-5350 MHz, 5470-5600 MHz and 5650-5725 MHz with DFS Master functionality and add 160 MHz bandwidth in the band 5150-5350 MHz.

Device is indoor use access point for NII-1 band. Professional installation required. Power output listed is conducted. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Outdoor use condition for NII-1 band with lower output power. Device is PTMP equipment and must meet EIRP requirement for above 30 degree elevation angle.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application bq/JIPCKFM7sQxEV4Vv+Zg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
United States 		  Date of Grant: 09/04/2019

Application Dated: 07/04/2019
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8DNWAP62
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.22  
38 CC MO 15E 5260.0  -  5320.0 0.151  
15E 5270.0  -  5310.0 0.182  
15E 5290.0  -  5290.0 0.115  
15E 5210.0  -  5290.0 0.079  
15E 5500.0  -  5580.0 0.13  
15E 5510.0  -  5550.0 0.14  
15E 5530.0  -  5530.0 0.129  
15E 5290.0  -  5290.0 0.059  
15E 5660.0  -  5700.0 0.12  
15E 5670.0  -  5670.0 0.136  
38 CC MO 15E 5500.0  -  5580.0 0.14  
38 CC MO 15E 5660.0  -  5700.0 0.134  
38 CC MO 15E 5745.0  -  5825.0 0.207  

C2PC to add the bands 5250-5350 MHz, 5470-5600 MHz and 5650-5725 MHz with DFS Master functionality and add 160 MHz bandwidth in the band 5150-5350 MHz.

Device is indoor use access point for NII-1 band. Professional installation required. Power output listed is conducted. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Outdoor use condition for NII-1 band with lower output power. Device is PTMP equipment and must meet EIRP requirement for above 30 degree elevation angle.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 4bjYMrhKG0jaBZ+dvM/Lsg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 07/23/2018

Application Dated: 07/23/2018
Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8DNWAP62
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.22  
CC MO 15E 5745.0  -  5825.0 0.207  

C2PC to add outdoor use condition for NII-1 band with lower output power. Device is PTMP equipment and must meet EIRP requirement for above 30 degree elevation angle.

Device is indoor use access point for NII-1 band. Professional installation required. Power output listed is conducted. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 4bjYMrhKG0jaBZ+dvM/Lsg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
United States 		  Date of Grant: 07/23/2018

Application Dated: 07/23/2018
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8DNWAP62
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.22  
CC MO 15E 5745.0  -  5825.0 0.207  

C2PC to add outdoor use condition for NII-1 band with lower output power. Device is PTMP equipment and must meet EIRP requirement for above 30 degree elevation angle.

Device is indoor use access point for NII-1 band. Professional installation required. Power output listed is conducted. Device contains 20/40/80MHz bandwidth and is 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: