FCC ID 2A25M-PRE31G
Pre-install 3.1G
by SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD
Grantee Code: 2A25M Product Code: PRE31G
Latest application date: 2021-10-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2021-10-26 |
| 701.5-713.5 MHz | Original Equipment | 2021-10-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2021-10-26 | PDF 437.6 KB |
| Internal photos part 1 | Internal Photos | 2021-10-26 | PDF 5.2 MB |
| Internal photos part 2 | Internal Photos | 2021-10-26 | PDF 2.3 MB |
| External photos | External Photos | 2021-10-26 | PDF 4.2 MB |
| Label | ID Label/Location Info | 2021-10-26 | PDF 32 KB |
| Test setup | Test Setup Photos | 2021-10-26 | PDF 1 MB |
| Test report Part 22 | Test Report | 2021-10-26 | PDF 4.7 MB |
| Test report Part 24 part 1 | Test Report | 2021-10-26 | PDF 5.3 MB |
| Test report Part 24 part 2 | Test Report | 2021-10-26 | PDF 948.4 KB |
| Test report Part 27 part 1 | Test Report | 2021-10-26 | PDF 5.3 MB |
| Test report Part 27 part 2 | Test Report | 2021-10-26 | PDF 5.5 MB |
| Test report Part 27 part 3 | Test Report | 2021-10-26 | PDF 5.3 MB |
| Test report Part 27 part 4 | Test Report | 2021-10-26 | PDF 3.3 MB |
| Test report part 1 | Test Report | 2021-10-26 | PDF 5.3 MB |
| Test report part 2 | Test Report | 2021-10-26 | PDF 1.1 MB |
| Cover Letter | Cover Letter(s) | 2021-10-26 | PDF 220 KB |
| Cover letter | Cover Letter(s) | 2021-10-26 | PDF 201.5 KB |
| RF Exposure | RF Exposure Info | 2021-10-26 | PDF 151.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 114.2 KB | |
| Schematics Metadata only | Schematics | PDF 608.4 KB | |
| Operational Description Metadata only | Operational Description | PDF 1.1 MB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 56.6 KB | |
| Tune up Metadata only | Parts List/Tune Up Info | PDF 62.5 KB |
Application Information
| Application ID | SF105lu7Bn8dHpK1w6QMgw== |
|---|---|
| Final Action Date | 2021-10-26 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0031350382 |
| Model | PRE31G |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Pre-install 3.1G |
| Responsible Party | CHU MINGCHENG, Director, lion.chu@clobotics.com |
| Test Firm | Sophia Huang, BTL Inc., Sophia.huang@newbtl.com |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| SF105lu7Bn8dHpK1w6QMgw== | 2021-10-26 | Original Equipment |
| 5+2DR2md2lQqgctQMo+b1w== | 2021-10-26 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 701.5-713.5 MHz | 0.0849 | 2.5ppm | 4M52W7D | 27 |
| 704-711 MHz | 0.1002 | 2.5ppm | 9M12G7D | 27 |
| 704-711 MHz | 0.0771 | 2.5ppm | 9M11W7D | 27 |
| 829-844 MHz | 0.0769 | 2.5ppm | 8M99G7D | 22H |
| 1715-1750 MHz | 0.2393 | 2.5ppm | 8M98G7D | 27 |
| 1720-1745 MHz | 0.2366 | 2.5ppm | 17M9W7D | 27 |
| 1720-1745 MHz | 0.2128 | 2.5ppm | 17M9W7D | 27 |
| 1852.5-1912.5 MHz | 0.3281 | 2.5ppm | 4M52W7D | 24E |
| 1855-1910 MHz | 0.3784 | 2.5ppm | 9M01G7D | 24E |
| 1860-1905 MHz | 0.3404 | 2.5ppm | 18M0G7D | 24E |
| 1860-1905 MHz | 0.3221 | 2.5ppm | 18M0W7D | 24E |
| 2412-2462 MHz | 0.1449000 | 15C | ||
| 2502.5-2567.5 MHz | 0.597 | 2.5ppm | 4M50G7D | 27 |
| 2510-2560 MHz | 0.5164 | 2.5ppm | 18M0W7D | 27 |
| 2510-2560 MHz | 0.5433 | 2.5ppm | 17M9G7D | 27 |
| 2555-2645 MHz | 0.6792 | 2.5ppm | 17M9G7D | 27 |
| 2555-2645 MHz | 0.5848 | 2.5ppm | 18M0W7D | 27 |
| 2575-2615 MHz | 0.6592 | 2.5ppm | 9M00G7D | 27 |
| 2575-2615 MHz | 0.5559 | 2.5ppm | 8M99W7D | 27 |
| 2580-2610 MHz | 0.6368 | 2.5ppm | 17M9G7D | 27 |
| 2580-2610 MHz | 0.5445 | 2.5ppm | 17M9W7D | 27 |
Grants
TCB Grant - Application SF105lu7Bn8dHpK1w6QMgw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/26/2021 Application Dated: 10/26/2021 |
| SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD |
| 555 DongChuan Rd., Building 5, Rm 102A, |
| Minhang Distr., |
| Shanghai, 200040 China |
| Attention: CHU MINGCHENG , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A25M-PRE31G |
| Name of Grantee: | SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Pre-install 3.1G |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1449 |
| Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application SF105lu7Bn8dHpK1w6QMgw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD 555 DongChuan Rd., Building 5, Rm 102A, Minhang Distr., Shanghai, 200040 China |
Date of Grant: 10/26/2021 Application Dated: 10/26/2021 |
| Attention: CHU MINGCHENG , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A25M-PRE31G |
| Name of Grantee: | SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Pre-install 3.1G |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1449 |
| Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/26/2021 Application Dated: 10/26/2021 |
| SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD |
| 555 DongChuan Rd., Building 5, Rm 102A, |
| Minhang Distr., |
| Shanghai, 200040 China |
| Attention: CHU MINGCHENG , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A25M-PRE31G |
| Name of Grantee: | SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Pre-install 3.1G |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 825.5 - 847.5 | 0.0771 | 2.5 PM | 2M69G7D | |
| 22H | 829.0 - 844.0 | 0.0719 | 2.5 PM | 8M99W7D | |
| 22H | 829.0 - 844.0 | 0.0769 | 2.5 PM | 8M99G7D | |
| 24E | 1855.0 - 1910.0 | 0.3784 | 2.5 PM | 9M01G7D | |
| 24E | 1852.5 - 1912.5 | 0.3281 | 2.5 PM | 4M52W7D | |
| 24E | 1860.0 - 1905.0 | 0.3404 | 2.5 PM | 18M0G7D | |
| 24E | 1860.0 - 1905.0 | 0.3221 | 2.5 PM | 18M0W7D | |
| 27 | 1715.0 - 1750.0 | 0.2393 | 2.5 PM | 8M98G7D | |
| 27 | 1720.0 - 1745.0 | 0.2128 | 2.5 PM | 17M9W7D | |
| 27 | 1720.0 - 1745.0 | 0.2366 | 2.5 PM | 17M9W7D | |
| 27 | 2502.5 - 2567.5 | 0.597 | 2.5 PM | 4M50G7D | |
| 27 | 2510.0 - 2560.0 | 0.5164 | 2.5 PM | 18M0W7D | |
| 27 | 2510.0 - 2560.0 | 0.5433 | 2.5 PM | 17M9G7D | |
| 27 | 704.0 - 711.0 | 0.1002 | 2.5 PM | 9M12G7D | |
| 27 | 701.5 - 713.5 | 0.0849 | 2.5 PM | 4M52W7D | |
| 27 | 704.0 - 711.0 | 0.0771 | 2.5 PM | 9M11W7D | |
| 27 | 2575.0 - 2615.0 | 0.6592 | 2.5 PM | 9M00G7D | |
| 27 | 2575.0 - 2615.0 | 0.5559 | 2.5 PM | 8M99W7D | |
| 27 | 2580.0 - 2610.0 | 0.6368 | 2.5 PM | 17M9G7D | |
| 27 | 2580.0 - 2610.0 | 0.5445 | 2.5 PM | 17M9W7D | |
| 27 | 2555.0 - 2645.0 | 0.6792 | 2.5 PM | 17M9G7D | |
| 27 | 2555.0 - 2645.0 | 0.5848 | 2.5 PM | 18M0W7D |
| Power output listed is ERP for Part 22 and Part 27 below 1 GHz, EIRP for Part 24 and Part 27 above 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
EAS Grant - Application 5+2DR2md2lQqgctQMo+b1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD 555 DongChuan Rd., Building 5, Rm 102A, Minhang Distr., Shanghai, 200040 China |
Date of Grant: 10/26/2021 Application Dated: 10/26/2021 |
| Attention: CHU MINGCHENG , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A25M-PRE31G |
| Name of Grantee: | SHANGHAI CLOBOTICS TECHNOLOGY CO., LTD |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Pre-install 3.1G |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 825.5 - 847.5 | 0.0771 | 2.5 PM | 2M69G7D | |
| 22H | 829.0 - 844.0 | 0.0719 | 2.5 PM | 8M99W7D | |
| 22H | 829.0 - 844.0 | 0.0769 | 2.5 PM | 8M99G7D | |
| 24E | 1855.0 - 1910.0 | 0.3784 | 2.5 PM | 9M01G7D | |
| 24E | 1852.5 - 1912.5 | 0.3281 | 2.5 PM | 4M52W7D | |
| 24E | 1860.0 - 1905.0 | 0.3404 | 2.5 PM | 18M0G7D | |
| 24E | 1860.0 - 1905.0 | 0.3221 | 2.5 PM | 18M0W7D | |
| 27 | 1715.0 - 1750.0 | 0.2393 | 2.5 PM | 8M98G7D | |
| 27 | 1720.0 - 1745.0 | 0.2128 | 2.5 PM | 17M9W7D | |
| 27 | 1720.0 - 1745.0 | 0.2366 | 2.5 PM | 17M9W7D | |
| 27 | 2502.5 - 2567.5 | 0.597 | 2.5 PM | 4M50G7D | |
| 27 | 2510.0 - 2560.0 | 0.5164 | 2.5 PM | 18M0W7D | |
| 27 | 2510.0 - 2560.0 | 0.5433 | 2.5 PM | 17M9G7D | |
| 27 | 704.0 - 711.0 | 0.1002 | 2.5 PM | 9M12G7D | |
| 27 | 701.5 - 713.5 | 0.0849 | 2.5 PM | 4M52W7D | |
| 27 | 704.0 - 711.0 | 0.0771 | 2.5 PM | 9M11W7D | |
| 27 | 2575.0 - 2615.0 | 0.6592 | 2.5 PM | 9M00G7D | |
| 27 | 2575.0 - 2615.0 | 0.5559 | 2.5 PM | 8M99W7D | |
| 27 | 2580.0 - 2610.0 | 0.6368 | 2.5 PM | 17M9G7D | |
| 27 | 2580.0 - 2610.0 | 0.5445 | 2.5 PM | 17M9W7D | |
| 27 | 2555.0 - 2645.0 | 0.6792 | 2.5 PM | 17M9G7D | |
| 27 | 2555.0 - 2645.0 | 0.5848 | 2.5 PM | 18M0W7D |
| Power output listed is ERP for Part 22 and Part 27 below 1 GHz, EIRP for Part 24 and Part 27 above 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
| Mail To: |