FCC ID 2A2MQ-SPEED10T

IP CAMERA

by Hangzhou Arenti Technology Co., Ltd.

Grantee Code: 2A2MQ   Product Code: SPEED10T
Latest application date: 2021-09-03

FCC ID Device Details

FCC ID2A2MQ-SPEED10T
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A2MQ
Product CodeSPEED10T
Applicant BusinessHangzhou Arenti Technology Co., Ltd. 🇨🇳
Related Domains meari.com.cn
Equipment ClassIP CAMERA
Test FirmBay Area Compliance Laboratories Corp. (Kunshan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2021-09-03
2412-2462 MHzOriginal Equipment2021-09-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-09-03PDF 982.2 KB
User manualUsers Manual2021-09-03PDF 982.2 KB
Internal PhotosInternal Photos2021-09-03PDF 2.4 MB
External PhotosExternal Photos2021-09-03PDF 2 MB
ID Label and Label LocationID Label/Location Info2021-09-03PDF 495.5 KB
Label & LocationID Label/Location Info2021-09-03PDF 495.5 KB
Test Setup PhotosTest Setup Photos2021-09-03PDF 856 KB
Test ReportTest Report2021-09-03PDF 2.8 MB
Test ReportTest Report2021-09-03PDF 2.5 MB
Attestation LetterAttestation Statements2021-09-03PDF 164.9 KB
DoS LetterCover Letter(s)2021-09-03PDF 105 KB
FCC Long Term Confidential Authorization FormCover Letter(s)2021-09-03PDF 104.8 KB
FCC long term Confidential AuthorizationCover Letter(s)2021-09-03PDF 104.8 KB
RF ExposureRF Exposure Info2021-09-03PDF 133.5 KB
RF ExposureRF Exposure Info2021-09-03PDF 188.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 426.7 KB
Schematics Metadata onlySchematicsPDF 602.5 KB
Circuit Description Metadata onlyOperational DescriptionPDF 511.2 KB
Opreation description Metadata onlyOperational DescriptionPDF 511.2 KB
U-NII Software Security Description Metadata onlyOperational DescriptionPDF 272 KB

Application Information

Application IDTadiuhHQv/pfJ0FJiFl/Hw==
Final Action Date2021-09-03
Application PurposeOriginal Equipment
Applicant FRN0031146822
ModelSPEED10T
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIP CAMERA
Responsible PartyZhiyang Chai, Manager, zhiyang.chai@meari.com.cn , +86-571-56565099
Test FirmMr. John Chan, Bay Area Compliance Laboratories Corp. (Kunshan), qa.ks@baclcorp.com , +86 0512 86175000
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
TadiuhHQv/pfJ0FJiFl/Hw==2021-09-03Original Equipment
FE3tjBngIEFRhHZzuX1V5A==2021-09-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.080000015CCC
5180-5240 MHz0.01415ECC
5745-5825 MHz0.03815ECC

Grants

TCB Grant - Application TadiuhHQv/pfJ0FJiFl/Hw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/03/2021

Application Dated: 09/03/2021
Hangzhou Arenti Technology Co., Ltd.
Zandsteen 50, 2132 MR Hoofddorp
Noord-Holland,
Netherlands
 
Attention: Zhiyang Chai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A2MQ-SPEED10T
Name of Grantee:  Hangzhou Arenti Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP CAMERA
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.014  
CC 15E 5745.0  -  5825.0 0.038  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TadiuhHQv/pfJ0FJiFl/Hw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hangzhou Arenti Technology Co., Ltd.
Zandsteen 50, 2132 MR Hoofddorp
Noord-Holland,
Netherlands
  Date of Grant: 09/03/2021

Application Dated: 09/03/2021
 
Attention: Zhiyang Chai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A2MQ-SPEED10T
Name of Grantee:  Hangzhou Arenti Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP CAMERA
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.014  
CC 15E 5745.0  -  5825.0 0.038  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application FE3tjBngIEFRhHZzuX1V5A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/03/2021

Application Dated: 09/03/2021
Hangzhou Arenti Technology Co., Ltd.
Zandsteen 50, 2132 MR Hoofddorp
Noord-Holland,
Netherlands
 
Attention: Zhiyang Chai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A2MQ-SPEED10T
Name of Grantee:  Hangzhou Arenti Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IP CAMERA
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.08  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application FE3tjBngIEFRhHZzuX1V5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hangzhou Arenti Technology Co., Ltd.
Zandsteen 50, 2132 MR Hoofddorp
Noord-Holland,
Netherlands
  Date of Grant: 09/03/2021

Application Dated: 09/03/2021
 
Attention: Zhiyang Chai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A2MQ-SPEED10T
Name of Grantee:  Hangzhou Arenti Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IP CAMERA
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.08  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: