1. FCC ID
  2. 2A3BL
  3. 2A3BL-G1

FCC ID 2A3BL-G1

AIOJET

by YuHong Electronic (shenzhen) Co.,Ltd

Grantee Code: 2A3BL   Product Code: G1
Latest application date: 2021-10-05

FCC ID Device Details

FCC ID2A3BL-G1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A3BL
Product CodeG1
Applicant BusinessYuHong Electronic (shenzhen) Co.,Ltd 🇨🇳
Equipment ClassAIOJET
Test FirmShenzhen GUOREN Certification Technology Service C

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-10-05
2402-2480 MHzOriginal Equipment2021-10-05
5180-5240 MHzOriginal Equipment2021-10-05

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-10-05PDF 1.6 MB
User manualUsers Manual2021-10-05PDF 1.6 MB
Internal PhotosInternal Photos2021-10-05PDF 2.2 MB
External PhotosExternal Photos2021-10-05PDF 325.3 KB
Label and Label LocationID Label/Location Info2021-10-05PDF 111.9 KB
Label and locationID Label/Location Info2021-10-05PDF 111.9 KB
Test setup photosTest Setup Photos2021-10-05PDF 307.4 KB
Test Report-NII_Part 1Test Report2021-10-05PDF 5.1 MB
Test Report-NII_Part 2Test Report2021-10-05PDF 2.9 MB
Test report-DSS_Part 1Test Report2021-10-05PDF 4.7 MB
Test report-DSS_Part 2Test Report2021-10-05PDF 4.1 MB
Test report-DTS_2G4WLAN_Part 1Test Report2021-10-05PDF 5.1 MB
Test report-DTS_2G4WLAN_Part 2Test Report2021-10-05PDF 3.1 MB
Test report-DTS_BLETest Report2021-10-05PDF 2.6 MB
FCC Confidentiality request letterCover Letter(s)2021-10-05PDF 107.9 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2021-10-05PDF 115.1 KB
FCC POACover Letter(s)2021-10-05PDF 67.9 KB
FCC UNII Device Declaration LetterCover Letter(s)2021-10-05PDF 44.6 KB
RF Exposure-MPERF Exposure Info2021-10-05PDF 372.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 122.6 KB
Schematic Metadata onlySchematicsPDF 1 MB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 74.2 KB
Operation Description Metadata onlyOperational DescriptionPDF 245.9 KB
Declaration Letter of Software Security Requirements-Slaver Metadata onlySDR Software/Security InfPDF 121.5 KB

Application Information

Application IDpEN/KUZg3DSpmYkD9keFmQ==
Final Action Date2021-10-05
Application PurposeOriginal Equipment
Applicant FRN0031443286
ModelG1
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAIOJET
Responsible PartyJianguo Liu, Manager, 531012253@qq.com , 13424388340
Test FirmSam Wang, Shenzhen GUOREN Certification Technology Service C, sam.wang@grcert.com , +86 755 23408306
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. This device supports 2*2 MIMO and supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
pEN/KUZg3DSpmYkD9keFmQ==2021-10-05Original Equipment
jaNLuo1r0NElqycmSNHH9A==2021-10-05Original Equipment
4/Dvz50SE9aHxdiG0lB03w==2021-10-05Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004400015C
2402-2480 MHz0.000315CCC
2412-2462 MHz0.056215CCC, MO
2422-2452 MHz0.038315CCC, MO
5180-5240 MHz0.076915ECC, MO
5190-5230 MHz0.091615ECC, MO
5210 MHz0.085915ECC, MO
5745-5825 MHz0.095115ECC, MO
5755-5795 MHz0.093115ECC, MO
5775 MHz0.094415ECC, MO

Grants

TCB Grant - Application pEN/KUZg3DSpmYkD9keFmQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/05/2021

Application Dated: 10/05/2021
YuHong Electronic (shenzhen) Co.,Ltd
407,Floor 4,Building D,Youth Pioneer Park,
Jianshe East Road,Tsinghua Community,
Longhua Street, Longhua District, Shenzhen,
China
 
Attention: Jianguo Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3BL-G1
Name of Grantee:  YuHong Electronic (shenzhen) Co.,Ltd
Equipment Class: Digital Transmission System
Notes: AIOJET
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0003  
CC MO 15C 2412.0  -  2462.0 0.0562  
CC MO 15C 2422.0  -  2452.0 0.0383  

Output Power listed is peak conducted.

This device supports 2*2 MIMO and supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application pEN/KUZg3DSpmYkD9keFmQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

YuHong Electronic (shenzhen) Co.,Ltd
407,Floor 4,Building D,Youth Pioneer Park, Jianshe East Road,Tsinghua Community,
Longhua Street, Longhua District, Shenzhen,
China 		  Date of Grant: 10/05/2021

Application Dated: 10/05/2021
 
Attention: Jianguo Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3BL-G1
Name of Grantee:  YuHong Electronic (shenzhen) Co.,Ltd
Equipment Class: Digital Transmission System
Notes: AIOJET
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0003  
CC MO 15C 2412.0  -  2462.0 0.0562  
CC MO 15C 2422.0  -  2452.0 0.0383  

Output Power listed is peak conducted.

This device supports 2*2 MIMO and supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application jaNLuo1r0NElqycmSNHH9A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/05/2021

Application Dated: 10/05/2021
YuHong Electronic (shenzhen) Co.,Ltd
407,Floor 4,Building D,Youth Pioneer Park,
Jianshe East Road,Tsinghua Community,
Longhua Street, Longhua District, Shenzhen,
China
 
Attention: Jianguo Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3BL-G1
Name of Grantee:  YuHong Electronic (shenzhen) Co.,Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: AIOJET
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0044  

Output Power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


EAS Grant - Application jaNLuo1r0NElqycmSNHH9A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

YuHong Electronic (shenzhen) Co.,Ltd
407,Floor 4,Building D,Youth Pioneer Park, Jianshe East Road,Tsinghua Community,
Longhua Street, Longhua District, Shenzhen,
China 		  Date of Grant: 10/05/2021

Application Dated: 10/05/2021
 
Attention: Jianguo Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3BL-G1
Name of Grantee:  YuHong Electronic (shenzhen) Co.,Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: AIOJET
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0044  

Output Power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application 4/Dvz50SE9aHxdiG0lB03w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/05/2021

Application Dated: 10/05/2021
YuHong Electronic (shenzhen) Co.,Ltd
407,Floor 4,Building D,Youth Pioneer Park,
Jianshe East Road,Tsinghua Community,
Longhua Street, Longhua District, Shenzhen,
China
 
Attention: Jianguo Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3BL-G1
Name of Grantee:  YuHong Electronic (shenzhen) Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AIOJET
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0769  
CC MO 15E 5190.0  -  5230.0 0.0916  
CC MO 15E 5210.0  -  5210.0 0.0859  
CC MO 15E 5745.0  -  5825.0 0.0951  
CC MO 15E 5755.0  -  5795.0 0.0931  
CC MO 15E 5775.0  -  5775.0 0.0944  

Output power listed is average conducted.

This device supports 2*2 MIMO and supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 4/Dvz50SE9aHxdiG0lB03w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

YuHong Electronic (shenzhen) Co.,Ltd
407,Floor 4,Building D,Youth Pioneer Park, Jianshe East Road,Tsinghua Community,
Longhua Street, Longhua District, Shenzhen,
China 		  Date of Grant: 10/05/2021

Application Dated: 10/05/2021
 
Attention: Jianguo Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3BL-G1
Name of Grantee:  YuHong Electronic (shenzhen) Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AIOJET
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0769  
CC MO 15E 5190.0  -  5230.0 0.0916  
CC MO 15E 5210.0  -  5210.0 0.0859  
CC MO 15E 5745.0  -  5825.0 0.0951  
CC MO 15E 5755.0  -  5795.0 0.0931  
CC MO 15E 5775.0  -  5775.0 0.0944  

Output power listed is average conducted.

This device supports 2*2 MIMO and supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: