FCC ID 2A3GV-MSTWBM08
MST-WBM-08
by MEGA SYSTEM TECHNOLOGIES, INC.
Grantee Code: 2A3GV Product Code: MSTWBM08
Latest application date: 2021-12-12
FCC ID Device Details
| FCC ID | 2A3GV-MSTWBM08 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A3GV |
| Product Code | MSTWBM08 |
| Applicant Business | MEGA SYSTEM TECHNOLOGIES, INC. 🇹🇼 |
| Related Domains |  megatec.com.tw |
| Equipment Class | MST-WBM-08 |
| Test Firm | Global United Technology Services Co. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2021-12-12 |
| 2402-2480 MHz | Original Equipment | 2021-12-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-06-11 | PDF 2.3 MB |
| User manual | Users Manual | 2022-06-11 | PDF 2.3 MB |
| Internal Photos | Internal Photos | 2022-06-11 | PDF 534.6 KB |
| Internal photos | Internal Photos | 2022-06-11 | PDF 534.6 KB |
| External Photo | External Photos | 2022-06-11 | PDF 1.2 MB |
| External Photos | External Photos | 2022-06-11 | PDF 1.2 MB |
| Label | ID Label/Location Info | 2021-12-12 | PDF 37.4 KB |
| Label and location | ID Label/Location Info | 2021-12-12 | PDF 37.4 KB |
| Test Setup Photos | Test Setup Photos | 2022-06-11 | PDF 181.4 KB |
| Test Report | Test Report | 2021-12-12 | PDF 4.2 MB |
| Test Report | Test Report | 2021-12-12 | PDF 4.6 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2021-12-12 | PDF 11.6 KB |
| FCC Modular Approval Request Rev 3.0 | Cover Letter(s) | 2021-12-12 | PDF 133.2 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2021-12-12 | PDF 99.8 KB |
| MPE | RF Exposure Info | 2021-12-12 | PDF 108.4 KB |
| BlockDiagram Metadata only | Block Diagram | PDF 94.8 KB | |
| SCH Metadata only | Schematics | PDF 135.3 KB | |
| OP Metadata only | Operational Description | PDF 375.3 KB | |
| Operation Description Metadata only | Operational Description | PDF 375.3 KB |
Application Information
| Application ID | fV6YGd7qg18aE9ETcMQinQ== |
|---|---|
| Final Action Date | 2021-12-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0031541014 |
| Model | MSTWBM08 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | MST-WBM-08 |
| Responsible Party | Xiaohu Huang, Engineer, tiger@megatec.com.tw , (86)020-38602476 |
| Technical Contact | MEGA SYSTEM TECHNOLOGIES, INC., tiger@megatec.com.tw |
| Test Firm | Robinson Lo, Global United Technology Services Co. Ltd., robinson.lo@gtstest.com  , 86-0-755-2779-8480 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/11/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fV6YGd7qg18aE9ETcMQinQ== | 2021-12-12 | Original Equipment |
| FzC/mF1NSw7Jhtjsc3orNw== | 2021-12-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application FzC/mF1NSw7Jhtjsc3orNw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/12/2021 Application Dated: 12/12/2021 |
| MEGA SYSTEM TECHNOLOGIES, INC. |
| 2F, No. 41, Lane 76 Rui Guang Road, Neihu |
| Taipei, 11491 Taiwan |
| Attention: Xiaohu Huang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3GV-MSTWBM08 |
| Name of Grantee: | MEGA SYSTEM TECHNOLOGIES, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | MST-WBM-08 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.00065 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.02382 |
| Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application FzC/mF1NSw7Jhtjsc3orNw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MEGA SYSTEM TECHNOLOGIES, INC. 2F, No. 41, Lane 76 Rui Guang Road, Neihu Taipei, 11491 Taiwan |
Date of Grant: 12/12/2021 Application Dated: 12/12/2021 |
| Attention: Xiaohu Huang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3GV-MSTWBM08 |
| Name of Grantee: | MEGA SYSTEM TECHNOLOGIES, INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | MST-WBM-08 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.00065 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.02382 |
| Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/12/2021 Application Dated: 12/12/2021 |
| MEGA SYSTEM TECHNOLOGIES, INC. |
| 2F, No. 41, Lane 76 Rui Guang Road, Neihu |
| Taipei, 11491 Taiwan |
| Attention: Xiaohu Huang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3GV-MSTWBM08 |
| Name of Grantee: | MEGA SYSTEM TECHNOLOGIES, INC. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MST-WBM-08 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00111 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fV6YGd7qg18aE9ETcMQinQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MEGA SYSTEM TECHNOLOGIES, INC. 2F, No. 41, Lane 76 Rui Guang Road, Neihu Taipei, 11491 Taiwan |
Date of Grant: 12/12/2021 Application Dated: 12/12/2021 |
| Attention: Xiaohu Huang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3GV-MSTWBM08 |
| Name of Grantee: | MEGA SYSTEM TECHNOLOGIES, INC. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MST-WBM-08 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00111 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |