FCC ID 2A3GYCAP-1807

Thin Cast Smart Mirror

by Capstone Companies, Inc

Grantee Code: 2A3GY   Product Code: CAP1807
Latest application date: 2021-12-01

FCC ID Device Details

FCC ID2A3GYCAP-1807
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A3GY
Product CodeCAP1807
Applicant BusinessCapstone Companies, Inc 🇺🇸
Related Domains capstoneindustries.com
Equipment ClassThin Cast Smart Mirror
Test FirmIntertek Testing Services Shanghai

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2021-12-01
2402-2480 MHzOriginal Equipment2021-12-01
2402-2480 MHzOriginal Equipment2021-12-01

Exhibits

DocumentTypeAvailableFile
Confidential_User ManualUsers Manual2022-05-31PDF 941 KB
Confidential_Internal PhotoInternal Photos2022-05-31PDF 916.3 KB
TempConfidential_External PhotoExternal Photos2022-05-31PDF 230.3 KB
LabelID Label/Location Info2021-12-01PDF 581.7 KB
Label LocationID Label/Location Info2021-12-01PDF 235.4 KB
Test Setup-ed1Test Setup Photos2022-05-31PDF 325.4 KB
Appendix A1 Test results of Band U-NII-1Test Report2021-12-01PDF 3.4 MB
Appendix A2 Test results of Band U-NII-2ATest Report2021-12-01PDF 3.5 MB
Appendix A3 Test results of Band U-NII-2CTest Report2021-12-01PDF 4.3 MB
Appendix A4 Test results of Band U-NII-3Test Report2021-12-01PDF 3.5 MB
Report_15.247-BLE-ed1Test Report2021-12-01PDF 5.1 MB
Report_15.247-BT-ed1_Part1Test Report2021-12-01PDF 4.8 MB
Report_15.247-BT-ed1_Part2Test Report2021-12-01PDF 3.4 MB
Report_15.247-WIFI-ed1_Part1Test Report2021-12-01PDF 5 MB
Report_15.247-WIFI-ed1_Part2Test Report2021-12-01PDF 4.6 MB
Report_15.247-WIFI-ed1_Part3Test Report2021-12-01PDF 4.5 MB
Report_15.407-ed2Test Report2021-12-01PDF 1.1 MB
Report_DFS-ed1Test Report2021-12-01PDF 718.8 KB
Declaration letter for channel 12 and 13Cover Letter(s)2021-12-01PDF 26.6 KB
FCC Authorization LetterCover Letter(s)2021-12-01PDF 114.6 KB
FCC CONFIDENTIALITY LETTER211126Cover Letter(s)2021-12-01PDF 159.7 KB
Non-SDR declaration letter-ed1Cover Letter(s)2021-12-01PDF 120.7 KB
Report_FCC_MPE-ed1RF Exposure Info2021-12-01PDF 339.1 KB
Block Diagram-ed1 Metadata onlyBlock DiagramPDF 338.5 KB
Block Diagram_RF part-ed1 Metadata onlyBlock DiagramPDF 472.8 KB
Confidential_SCH_Product Metadata onlySchematicsPDF 1.3 MB
Confidential_SCH_RF part Metadata onlySchematicsPDF 873.9 KB
Confidential_Operation description Metadata onlyOperational DescriptionPDF 88.9 KB
Security for sofware-ed1 Metadata onlyOperational DescriptionPDF 140.9 KB

Application Information

Application IDeonUWwsVp9juW2SpYlYWXQ==
Final Action Date2021-12-01
Application PurposeOriginal Equipment
Applicant FRN0031542095
ModelCAP-1807
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionThin Cast Smart Mirror
Responsible PartyGeorge Wolf W Wolf, Corporate Business Development, gwolf@capstoneindustries.com , 9545708889
Technical ContactEric Li, Intertek Testing Services Limited Shanghai, eric.yw.li@intertek.com , 86 21 61278265
Test FirmLeah Xu, Intertek Testing Services Shanghai, leah.xu@intertek.com , +86 21 61278200
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/31/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes in 5GHz WLAN transmitter. This device contains 2.4GHz WLAN, Bluetooth and BLE transmitters.

Applications

Application IDDatePurpose
eonUWwsVp9juW2SpYlYWXQ==2021-12-01Original Equipment
aa0zA6f4TOXGAiYNzJ7IyA==2021-12-01Original Equipment
DnKxoC2r9rGbBSl3papnRA==2021-12-01Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003000015CCC
2402-2480 MHz0.00315CCC
2412-2462 MHz0.06115CCC
5180-5240 MHz0.01515ECC
5260-5320 MHz0.01415ECC, ND
5500-5700 MHz0.01615ECC, ND
5745-5825 MHz0.01515ECC

Grants

TCB Grant - Application eonUWwsVp9juW2SpYlYWXQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/01/2021

Application Dated: 11/29/2021
Capstone Companies, Inc
431 Fairway Drive
Suite 200
Deerfield Beach, FL 33441-1823
 
Attention: George Wolf Wolf , Corporate Business Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3GYCAP-1807
Name of Grantee:  Capstone Companies, Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Thin Cast Smart Mirror
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.015  
CC ND 15E 5260.0  -  5320.0 0.014  
CC ND 15E 5500.0  -  5700.0 0.016  
CC 15E 5745.0  -  5825.0 0.015  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes in 5GHz WLAN transmitter.

This device contains 2.4GHz WLAN, Bluetooth and BLE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application eonUWwsVp9juW2SpYlYWXQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Capstone Companies, Inc
431 Fairway Drive Suite 200
Deerfield Beach, FL 33441-1823
United States
  Date of Grant: 12/01/2021

Application Dated: 11/29/2021
 
Attention: George Wolf Wolf , Corporate Business Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3GYCAP-1807
Name of Grantee:  Capstone Companies, Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Thin Cast Smart Mirror
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.015  
CC ND 15E 5260.0  -  5320.0 0.014  
CC ND 15E 5500.0  -  5700.0 0.016  
CC 15E 5745.0  -  5825.0 0.015  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes in 5GHz WLAN transmitter.

This device contains 2.4GHz WLAN, Bluetooth and BLE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application DnKxoC2r9rGbBSl3papnRA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/01/2021

Application Dated: 11/30/2021
Capstone Companies, Inc
431 Fairway Drive
Suite 200
Deerfield Beach, FL 33441-1823
 
Attention: George Wolf Wolf , Corporate Business Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3GYCAP-1807
Name of Grantee:  Capstone Companies, Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Thin Cast Smart Mirror
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device contains a BLE transmitter, a 2.4GHz WLAN transmitter and a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application DnKxoC2r9rGbBSl3papnRA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Capstone Companies, Inc
431 Fairway Drive Suite 200
Deerfield Beach, FL 33441-1823
United States
  Date of Grant: 12/01/2021

Application Dated: 11/30/2021
 
Attention: George Wolf Wolf , Corporate Business Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3GYCAP-1807
Name of Grantee:  Capstone Companies, Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Thin Cast Smart Mirror
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device contains a BLE transmitter, a 2.4GHz WLAN transmitter and a 5GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application aa0zA6f4TOXGAiYNzJ7IyA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/01/2021

Application Dated: 11/29/2021
Capstone Companies, Inc
431 Fairway Drive
Suite 200
Deerfield Beach, FL 33441-1823
 
Attention: George Wolf Wolf , Corporate Business Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3GYCAP-1807
Name of Grantee:  Capstone Companies, Inc
Equipment Class: Digital Transmission System
Notes: Thin Cast Smart Mirror
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.061  
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter.

This device contains 5GHz WLAN and Bluetooth transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application aa0zA6f4TOXGAiYNzJ7IyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Capstone Companies, Inc
431 Fairway Drive Suite 200
Deerfield Beach, FL 33441-1823
United States
  Date of Grant: 12/01/2021

Application Dated: 11/29/2021
 
Attention: George Wolf Wolf , Corporate Business Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3GYCAP-1807
Name of Grantee:  Capstone Companies, Inc
Equipment Class: Digital Transmission System
Notes: Thin Cast Smart Mirror
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.061  
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter.

This device contains 5GHz WLAN and Bluetooth transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: