FCC ID 2A3JX-4343
Transceiver Module
by Beam Technologies, LLC
Grantee Code: 2A3JX Product Code: 4343
Latest application date: 2022-02-16
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: O7P-4343 Grant Date: 11/15/2018 | 2022-02-16 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: O7P-4343 Grant Date: 11/15/2018 | 2022-02-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| EXTERNAL PHOTOS | External Photos | 2022-02-16 | PDF 473.1 KB |
| LABEL | ID Label/Location Info | 2022-02-16 | PDF 82.6 KB |
| COVER LETTER | Cover Letter(s) | 2022-02-16 | PDF 157.4 KB |
| LETTER OF AGENCY | Cover Letter(s) | 2022-02-16 | PDF 138.3 KB |
| ORIGINAL GRANTEE AUTHORIZATION | Cover Letter(s) | 2022-02-16 | PDF 479.6 KB |
Application Information
| Application ID | 9Z2TSx9x1BllaO9BMiGmBA== |
|---|---|
| Final Action Date | 2022-02-16 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: O7P-4343 Grant Date: 11/15/2018 |
| Applicant FRN | 0031575038 |
| Model | 4343 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Transceiver Module |
| Responsible Party | James Farthing, Head of Hardware, james.farthing@beam.dental  , 859-333-0114 |
| Test Firm | George Yang, US Tech, gyang@ustech-lab.com  , 770-740-0717 |
| TCB Email | tcb_admin@intertek.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9Z2TSx9x1BllaO9BMiGmBA== | 2022-02-16 | Change in identification of presently authorized equipment. Original FCC ID: O7P-4343 Grant Date: 11/15/2018 |
| 6iZLeqZ+zd9/W6wMu4Baaw== | 2022-02-16 | Change in identification of presently authorized equipment. Original FCC ID: O7P-4343 Grant Date: 11/15/2018 |
Equipment Authorization
Grants
TCB Grant - Application 9Z2TSx9x1BllaO9BMiGmBA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 02/16/2022 Application Dated: 02/16/2022 |
| Beam Technologies, LLC |
| 226 N. 5th St. |
| 4th Floor |
| Columbus, OH 43215 |
| Attention: James Farthing , Head of Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3JX-4343 |
| Name of Grantee: | Beam Technologies, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0064 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9Z2TSx9x1BllaO9BMiGmBA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Beam Technologies, LLC 226 N. 5th St. 4th Floor Columbus, OH 43215 United States |
Date of Grant: 02/16/2022 Application Dated: 02/16/2022 |
| Attention: James Farthing , Head of Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3JX-4343 |
| Name of Grantee: | Beam Technologies, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0064 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 02/16/2022 Application Dated: 02/16/2022 |
| Beam Technologies, LLC |
| 226 N. 5th St. |
| 4th Floor |
| Columbus, OH 43215 |
| Attention: James Farthing , Head of Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3JX-4343 |
| Name of Grantee: | Beam Technologies, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2213 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 6iZLeqZ+zd9/W6wMu4Baaw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Beam Technologies, LLC 226 N. 5th St. 4th Floor Columbus, OH 43215 United States |
Date of Grant: 02/16/2022 Application Dated: 02/16/2022 |
| Attention: James Farthing , Head of Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3JX-4343 |
| Name of Grantee: | Beam Technologies, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2213 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |