FCC ID 2A3PA-RADXA-ROCK3C

Radxa ROCK 3 Model C

by ROCKPI TRADING LIMITED

Grantee Code: 2A3PA   Product Code: RADXAROCK3C
Latest application date: 2023-05-31

FCC ID Device Details

FCC ID2A3PA-RADXA-ROCK3C
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A3PA
Product CodeRADXAROCK3C
Applicant BusinessROCKPI TRADING LIMITED 🇨🇳
Related Domains radxa.com
Equipment ClassRadxa ROCK 3 Model C
Test FirmShenzhen BCTC Testing Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2023-05-31
2412-2462 MHzOriginal Equipment2023-05-31
5180-5240 MHzOriginal Equipment2023-05-31

Exhibits

DocumentTypeAvailableFile
U ManualUsers Manual2023-07-15PDF 2.4 MB
User manualUsers Manual2023-07-15PDF 2.4 MB
user manualUsers Manual2023-07-15PDF 2.4 MB
Internal PhotosInternal Photos2023-05-31PDF 335.7 KB
External PhotosExternal Photos2023-05-31PDF 783.5 KB
External photosExternal Photos2023-05-31PDF 783.5 KB
Label LabelLocationID Label/Location Info2023-05-31PDF 349.1 KB
Label LocationID Label/Location Info2023-05-31PDF 349.1 KB
OPOperational Description2023-05-31PDF 722.9 KB
Test Setup PhotosTest Setup Photos2023-05-31PDF 565.4 KB
ANTTest Report2023-05-31PDF 2.1 MB
Test ReportTest Report2023-05-31PDF 5.5 MB
Test ReportTest Report2023-05-31PDF 307.1 KB
Test Report2.4GTest Report2023-05-31PDF 4.7 MB
Test ReportBLETest Report2023-05-31PDF 3.6 MB
2.911 (d)(7)USAgentforServiceofProcessv1.3 Metadata onlyAttestation Statements2023-05-31PDF 199.8 KB
2.911_(d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2023-05-31PDF 417.5 KB
2.911_(d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2023-05-31PDF 401.2 KB
2.911_(d)(7) US Agent for Service of Process v1.2Attestation Statements2023-05-31PDF 199.8 KB
2.911_(d)(7)USAAttestation Statements2023-05-31PDF 199.8 KB
2911_(d)(5)(i) Certification Equipment Type v12Attestation Statements2023-05-31PDF 417.5 KB
2911_(d)(5)(ii) Certificiation Applicant v12Attestation Statements2023-05-31PDF 401.2 KB
Agent Authorization Rev 1.0Cover Letter(s)2023-05-31PDF 27.1 KB
AgentAuthorizationRev1.0Cover Letter(s)2023-05-31PDF 27.1 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2023-05-31PDF 145.8 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2023-05-31PDF 125.2 KB
LongTermConfidentialityRequestCover Letter(s)2023-05-31PDF 128.6 KB
Long_Term_ConfidentialityCover Letter(s)2023-05-31PDF 128.6 KB
Model DifferenceCover Letter(s)2023-05-31PDF 197.1 KB
Model Difference DeclarationCover Letter(s)2023-05-31PDF 197.1 KB
RF ExposureRF Exposure Info2023-05-31PDF 307.1 KB
RF exposureRF Exposure Info2023-05-31PDF 307.1 KB
Block Metadata onlyBlock DiagramPDF 490 KB
Block Diagram Metadata onlyBlock DiagramPDF 490 KB
SCH Metadata onlySchematicsPDF 1.1 MB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 490.4 KB

Application Information

Application IDskWV1Q0OIx39KWBDJtseQA==
Final Action Date2023-05-31
Application PurposeOriginal Equipment
Applicant FRN0031646326
ModelRADXA-ROCK3C
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRadxa ROCK 3 Model C
Responsible PartyLuffy Wang, support@radxa.com , 13760396499
Technical ContactROCKPI TRADING LIMITED, support@radxa.com
Test FirmAlan Mei, Shenzhen BCTC Testing Co., Ltd., alan.mei@bctc-lab.com.cn , +8675536882589
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/15/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
skWV1Q0OIx39KWBDJtseQA==2023-05-31Original Equipment
ZV2VaK94yrFAaReOLKS/5Q==2023-05-31Original Equipment
6CbrhLehJhFaYctCkAW+Pg==2023-05-31Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002400015CCC
2402-2480 MHz0.001615CCC
2412-2462 MHz0.013815CCC
5180-5240 MHz0.001600015ECC

Grants

TCB Grant - Application ZV2VaK94yrFAaReOLKS/5Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/31/2023

Application Dated: 05/31/2023
ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre,
191 Javaroad, north point,
Hong Kong,,
China
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-RADXA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Digital Transmission System
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  
CC 15C 2412.0  -  2462.0 0.0138  

Single Modular Approval. Output power listed is max conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZV2VaK94yrFAaReOLKS/5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre, 191 Javaroad, north point,
Hong Kong,,
China
  Date of Grant: 05/31/2023

Application Dated: 05/31/2023
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-RADXA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Digital Transmission System
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  
CC 15C 2412.0  -  2462.0 0.0138  

Single Modular Approval. Output power listed is max conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application skWV1Q0OIx39KWBDJtseQA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/31/2023

Application Dated: 05/31/2023
ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre,
191 Javaroad, north point,
Hong Kong,,
China
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-RADXA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  

Single Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application skWV1Q0OIx39KWBDJtseQA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre, 191 Javaroad, north point,
Hong Kong,,
China
  Date of Grant: 05/31/2023

Application Dated: 05/31/2023
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-RADXA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  

Single Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6CbrhLehJhFaYctCkAW+Pg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/31/2023

Application Dated: 05/31/2023
ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre,
191 Javaroad, north point,
Hong Kong,,
China
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-RADXA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0016  

Single Modular Approval. Output power listed is max conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6CbrhLehJhFaYctCkAW+Pg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre, 191 Javaroad, north point,
Hong Kong,,
China
  Date of Grant: 05/31/2023

Application Dated: 05/31/2023
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-RADXA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0016  

Single Modular Approval. Output power listed is max conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: