FCC ID 2A3PA-ROCK3C

Radxa ROCK 3 Model C

by ROCKPI TRADING LIMITED

Grantee Code: 2A3PA   Product Code: ROCK3C
Latest application date: 2022-08-25

FCC ID Device Details

FCC ID2A3PA-ROCK3C
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A3PA
Product CodeROCK3C
Applicant BusinessROCKPI TRADING LIMITED 🇨🇳
Related Domains radxa.com
Equipment ClassRadxa ROCK 3 Model C
Test FirmShenzhen BCTC Testing Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2022-08-25
5180-5240 MHzOriginal Equipment2022-08-25
2412-2462 MHzOriginal Equipment2022-08-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-10-10PDF 747.6 KB
User manualUsers Manual2022-10-10PDF 747.6 KB
Internal PhotosInternal Photos2022-08-25PDF 900.8 KB
Internal photoInternal Photos2022-08-25PDF 900.8 KB
External PhotoExternal Photos2022-08-25PDF 711.8 KB
External photoExternal Photos2022-08-25PDF 711.8 KB
LabelID Label/Location Info2022-08-25PDF 216.4 KB
Label and LocationID Label/Location Info2022-08-25PDF 216.4 KB
Test Setup PhotogTest Setup Photos2022-08-25PDF 443.5 KB
Test Setup photosTest Setup Photos2022-08-25PDF 443.5 KB
Test photosTest Setup Photos2022-08-25PDF 443.5 KB
Test ReportTest Report2022-08-25PDF 4.4 MB
Test ReportTest Report2022-08-25PDF 5.8 MB
Test ReportTest Report2022-08-25PDF 5.4 MB
ANTCover Letter(s)2022-08-25PDF 2.2 MB
Agent Authorization LetterCover Letter(s)2022-08-25PDF 30.3 KB
Agent Authorization Rev 1.0Cover Letter(s)2022-08-25PDF 30.3 KB
AgentAuthorizationRev1.0Cover Letter(s)2022-08-25PDF 30.3 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2022-08-25PDF 95.7 KB
FCC Modular Approval Request Rev 3.0_rev1Cover Letter(s)2022-08-25PDF 95.7 KB
FCC Short & Long Term Confidentiality RequestCover Letter(s)2022-08-25PDF 79.9 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-08-25PDF 79.9 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2022-08-25PDF 77.8 KB
Model DifferenceCover Letter(s)2022-08-25PDF 108.6 KB
Model Difference DeclarationCover Letter(s)2022-08-25PDF 108.6 KB
RF Exposure EvaluationRF Exposure Info2022-08-25PDF 177.1 KB
RFexposureRF Exposure Info2022-08-25PDF 177.1 KB
Block Metadata onlyBlock DiagramPDF 249.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 249.5 KB
SCH Metadata onlySchematicsPDF 1 MB
OP Metadata onlyOperational DescriptionPDF 82.1 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 162.3 KB

Application Information

Application IDOIy/Y96oSh1tvM7L65MG8w==
Final Action Date2022-08-25
Application PurposeOriginal Equipment
Applicant FRN0031646326
ModelROCK3C
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRadxa ROCK 3 Model C
Responsible PartyLuffy Wang, support@radxa.com , 13760396499
Technical ContactROCKPI TRADING LIMITED, support@radxa.com
Test FirmAlan Mei, Shenzhen BCTC Testing Co., Ltd., alan.mei@bctc-lab.com.cn , +8675536882589
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/10/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
OIy/Y96oSh1tvM7L65MG8w==2022-08-25Original Equipment
EYbWZ+cvShtsD+EjnVJ2Nw==2022-08-25Original Equipment
A8Nu6NqngOxXe2iV4IDCfg==2022-08-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002815CCC
2402-2480 MHz0.000800015CCC
2412-2462 MHz0.019915CCC
5180-5240 MHz0.017800015ECC

Grants

TCB Grant - Application OIy/Y96oSh1tvM7L65MG8w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/25/2022

Application Dated: 08/25/2022
ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre,
191 Javaroad, north point,
Hong Kong,,
China
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application OIy/Y96oSh1tvM7L65MG8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre, 191 Javaroad, north point,
Hong Kong,,
China
  Date of Grant: 08/25/2022

Application Dated: 08/25/2022
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EYbWZ+cvShtsD+EjnVJ2Nw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/25/2022

Application Dated: 08/25/2022
ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre,
191 Javaroad, north point,
Hong Kong,,
China
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0178  

Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EYbWZ+cvShtsD+EjnVJ2Nw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre, 191 Javaroad, north point,
Hong Kong,,
China
  Date of Grant: 08/25/2022

Application Dated: 08/25/2022
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0178  

Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application A8Nu6NqngOxXe2iV4IDCfg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/25/2022

Application Dated: 08/25/2022
ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre,
191 Javaroad, north point,
Hong Kong,,
China
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Digital Transmission System
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0028  
CC 15C 2412.0  -  2462.0 0.0199  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application A8Nu6NqngOxXe2iV4IDCfg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ROCKPI TRADING LIMITED
Room 11, 27/f, Ga wah international centre, 191 Javaroad, north point,
Hong Kong,,
China
  Date of Grant: 08/25/2022

Application Dated: 08/25/2022
 
Attention: Luffy Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A3PA-ROCK3C
Name of Grantee:  ROCKPI TRADING LIMITED
Equipment Class: Digital Transmission System
Notes: Radxa ROCK 3 Model C
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0028  
CC 15C 2412.0  -  2462.0 0.0199  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: