FCC ID 2A3TH-MX530VX
MX530VX
by MAXON O.E.TECH.CO.,LTD
Grantee Code: 2A3TH Product Code: MX530VX
Latest application date: 2021-12-12
FCC ID Device Details
| FCC ID | 2A3TH-MX530VX |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A3TH |
| Product Code | MX530VX |
| Applicant Business | MAXON O.E.TECH.CO.,LTD 🇨🇳 |
| Related Domains |  maxonc.com |
| Equipment Class | MX530VX |
| Test Firm | Shenzhen Anbotek Compliance Laboratory Limited |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AS2S-MX530VX Grant Date: 11/30/2021 | 2021-12-12 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AS2S-MX530VX Grant Date: 11/30/2021 | 2021-12-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Ext EUT PHOTO | External Photos | 2021-12-12 | PDF 749.6 KB |
| label | ID Label/Location Info | 2021-12-12 | PDF 170.9 KB |
| FCC Authorization from Original Grantee for ID change V1.1 | Cover Letter(s) | 2021-12-12 | PDF 52.4 KB |
| FCC Request for change in ID | Cover Letter(s) | 2021-12-12 | PDF 64.8 KB |
| Letter of Authorization | Cover Letter(s) | 2021-12-12 | PDF 57.1 KB |
Application Information
| Application ID | VBTwP/57bW9jorfhx42LWA== |
|---|---|
| Final Action Date | 2021-12-12 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2AS2S-MX530VX Grant Date: 11/30/2021 |
| Applicant FRN | 0031690621 |
| Model | MX530VX |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | MX530VX |
| Responsible Party | qinglong Liu, product manager, liuql@maxonc.com , 025-86380932 |
| Technical Contact | MAXON O.E.TECH.CO.,LTD, liuql@maxonc.com |
| Test Firm | Jeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com  , 86-755-26064492 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 3x3 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| VBTwP/57bW9jorfhx42LWA== | 2021-12-12 | Change in identification of presently authorized equipment. Original FCC ID: 2AS2S-MX530VX Grant Date: 11/30/2021 |
| Ml38CIsUFg4NaA6ygjx2Xg== | 2021-12-12 | Change in identification of presently authorized equipment. Original FCC ID: 2AS2S-MX530VX Grant Date: 11/30/2021 |
Equipment Authorization
Grants
TCB Grant - Application VBTwP/57bW9jorfhx42LWA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/12/2021 Application Dated: 12/12/2021 |
| MAXON O.E.TECH.CO.,LTD |
| 6th floor, Building A3 |
| Zidong International Creative Park, Zidong Road, |
| Qixia District, Nanjing, 210000 China |
| Attention: qinglong Liu , product manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3TH-MX530VX |
| Name of Grantee: | MAXON O.E.TECH.CO.,LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | MX530VX |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.018 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0177 |
| Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 3x3 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application VBTwP/57bW9jorfhx42LWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXON O.E.TECH.CO.,LTD 6th floor, Building A3 Zidong International Creative Park, Zidong Road, Qixia District, Nanjing, 210000 China |
Date of Grant: 12/12/2021 Application Dated: 12/12/2021 |
| Attention: qinglong Liu , product manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3TH-MX530VX |
| Name of Grantee: | MAXON O.E.TECH.CO.,LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | MX530VX |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.018 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0177 |
| Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 3x3 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/12/2021 Application Dated: 12/12/2021 |
| MAXON O.E.TECH.CO.,LTD |
| 6th floor, Building A3 |
| Zidong International Creative Park, Zidong Road, |
| Qixia District, Nanjing, 210000 China |
| Attention: qinglong Liu , product manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3TH-MX530VX |
| Name of Grantee: | MAXON O.E.TECH.CO.,LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | MX530VX |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.0161 |
| Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 3x3 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Ml38CIsUFg4NaA6ygjx2Xg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXON O.E.TECH.CO.,LTD 6th floor, Building A3 Zidong International Creative Park, Zidong Road, Qixia District, Nanjing, 210000 China |
Date of Grant: 12/12/2021 Application Dated: 12/12/2021 |
| Attention: qinglong Liu , product manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A3TH-MX530VX |
| Name of Grantee: | MAXON O.E.TECH.CO.,LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | MX530VX |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.0161 |
| Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 3x3 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |