FCC ID 2A46G-XAPC2AHBD25R
XAG APC2 AutoPilot Console
by Guangzhou Xaircraft Technology CO.,LTD
Grantee Code: 2A46G Product Code: XAPC2AHBD25R
Latest application date: 2024-06-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2024-06-27 |
| 2412-2462 MHz | Original Equipment | 2024-06-27 |
Application Information
| Application ID | QMZLMs4cxnFxN0v8D05Eiw== |
|---|---|
| Final Action Date | 2024-06-27 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0032030363 |
| Model | XAPC2AHBD25R |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | XAG APC2 AutoPilot Console |
| Responsible Party | Elaine Wu, Product Certification Engineer, wumeilan@xa.com  , +8602039218499 |
| Test Firm | Stephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com  , +86 0769 33817120 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is Peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this EUT has been evaluated with FCC ID: 2A46G-EG25-G. Co-location with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QMZLMs4cxnFxN0v8D05Eiw== | 2024-06-27 | Original Equipment |
| 3nn+RyolaHV+/vKF64/+4w== | 2024-06-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application QMZLMs4cxnFxN0v8D05Eiw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/27/2024 Application Dated: 06/27/2024 |
| Guangzhou Xaircraft Technology CO.,LTD |
| Block C,No.115,Gaopu Road,Tianhe District, |
| GuangzhouCity, Guangdong,P.R., China |
| Attention: Elaine Wu , Product Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A46G-XAPC2AHBD25R |
| Name of Grantee: | Guangzhou Xaircraft Technology CO.,LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XAG APC2 AutoPilot Console |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output power listed is Peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this EUT has been evaluated with FCC ID: 2A46G-EG25-G. Co-location with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QMZLMs4cxnFxN0v8D05Eiw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Xaircraft Technology CO.,LTD Block C,No.115,Gaopu Road,Tianhe District, GuangzhouCity, Guangdong,P.R., China |
Date of Grant: 06/27/2024 Application Dated: 06/27/2024 |
| Attention: Elaine Wu , Product Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A46G-XAPC2AHBD25R |
| Name of Grantee: | Guangzhou Xaircraft Technology CO.,LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XAG APC2 AutoPilot Console |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output power listed is Peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this EUT has been evaluated with FCC ID: 2A46G-EG25-G. Co-location with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/27/2024 Application Dated: 06/27/2024 |
| Guangzhou Xaircraft Technology CO.,LTD |
| Block C,No.115,Gaopu Road,Tianhe District, |
| GuangzhouCity, Guangdong,P.R., China |
| Attention: Elaine Wu , Product Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A46G-XAPC2AHBD25R |
| Name of Grantee: | Guangzhou Xaircraft Technology CO.,LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | XAG APC2 AutoPilot Console |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.032 |
| BLE power is peak conducted, and WLAN is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this EUT has been evaluated with FCC ID: 2A46G-EG25-G. Co-location with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3nn+RyolaHV+/vKF64/+4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Xaircraft Technology CO.,LTD Block C,No.115,Gaopu Road,Tianhe District, GuangzhouCity, Guangdong,P.R., China |
Date of Grant: 06/27/2024 Application Dated: 06/27/2024 |
| Attention: Elaine Wu , Product Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A46G-XAPC2AHBD25R |
| Name of Grantee: | Guangzhou Xaircraft Technology CO.,LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | XAG APC2 AutoPilot Console |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.032 |
| BLE power is peak conducted, and WLAN is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and co-location of this EUT has been evaluated with FCC ID: 2A46G-EG25-G. Co-location with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |