1. FCC ID
  2. 2A4J2
  3. 2A4J2-SERPRO

FCC ID 2A4J2-SERPRO

Mini PC

by ShenZhen AZW Technology CO.,LTD.

Grantee Code: 2A4J2   Product Code: SERPRO
Latest application date: 2025-01-09

FCC ID Device Details

FCC ID2A4J2-SERPRO
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A4J2
Product CodeSERPRO
Applicant BusinessShenZhen AZW Technology CO.,LTD. 🇨🇳
Equipment ClassMini PC
Test FirmShenzhen ETR Standard Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2025-01-09
5180-5240 MHzOriginal Equipment2025-01-09

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-07-09PDF 4.6 MB
Internal PhotographInternal Photos2025-07-09PDF 3.7 MB
Internal photosInternal Photos2025-07-09PDF 3.7 MB
External PhotographExternal Photos2025-07-09PDF 1.8 MB
ExternalPhotosExternal Photos2025-07-09PDF 1.8 MB
Label and label locationID Label/Location Info2025-01-09PDF 891.3 KB
Label&LocationID Label/Location Info2025-01-09PDF 891.3 KB
TEST SETUP PHOTOSTest Setup Photos2025-07-09PDF 244.3 KB
Test Setup PhotosTest Setup Photos2025-07-09PDF 244.3 KB
15.407E&RSS 247 5G WIFI-Part 1Test Report2025-01-09PDF 5.7 MB
15.407E&RSS 247 5G WIFI-Part 2Test Report2025-01-09PDF 5.5 MB
Ant reportTest Report2025-01-09PDF 1.6 MB
Test Report 15.247&RSS 247 BLETest Report2025-01-09PDF 2.4 MB
Test Report 15.247&RSS 247 WIFITest Report2025-01-09PDF 4.4 MB
2.911 d 5 i CertificiationApplicantv1.3Attestation Statements2025-01-09PDF 407 KB
2.911 (d)(5)(i) Certification Equipment Type v1.2Attestation Statements2025-01-09PDF 407 KB
2.911 (d)(5)(ii) Certificiation Applicant v1.3Attestation Statements2025-01-09PDF 389.6 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2025-01-09PDF 389.6 KB
2.911 (d)(7) US Agent for Service of Process v1.4Attestation Statements2025-01-09PDF 158 KB
2.911 (d)(7)USAgentforServiceofProcessv1.2Attestation Statements2025-01-09PDF 158 KB
AGent Authorization Rev 1.0Cover Letter(s)2025-01-09PDF 13 KB
Agent Authorization Rev 1.0Cover Letter(s)2025-01-09PDF 13 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2025-01-09PDF 220.2 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2025-01-09PDF 160.7 KB
family models declaration letter for FCC .Cover Letter(s)2025-01-09PDF 215.4 KB
MPERF Exposure Info2025-01-09PDF 164.4 KB
BLOCK Diagram Metadata onlyBlock DiagramPDF 237.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 237.1 KB
SCH Metadata onlySchematicsPDF 1.4 MB
OP Metadata onlyOperational DescriptionPDF 508.5 KB
Software security operational description Metadata onlySDR Software/Security Info.PDF 435.8 KB

Application Information

Application IDfxHGWMeMcNPkPPMFDOmLdQ==
Final Action Date2025-01-09
Application PurposeOriginal Equipment
Applicant FRN0031976178
ModelSERPRO
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMini PC
Responsible PartyJerry Huang, 13528413123@139.com , 13528413123
Technical ContactShenZhen AZW Technology CO.,LTD., 13528413123@139.com
Test FirmSmith Chen, Shenzhen ETR Standard Technology Co., Ltd., etr802@etrtest.com , +86 755-85259392
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/09/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
fxHGWMeMcNPkPPMFDOmLdQ==2025-01-09Original Equipment
TGX7hFGwpDxXxj4kSZhM3w==2025-01-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002315CCC
2412-2462 MHz0.030315CCC
5180-5240 MHz0.028815ECC
5745-5825 MHz0.031915ECC

Grants

TCB Grant - Application TGX7hFGwpDxXxj4kSZhM3w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 01/09/2025

Application Dated: 01/09/2025
ShenZhen AZW Technology CO.,LTD.
701, Building 8, Hengda Shishang Huigu, next to
Fulong Road, Shanghenglang Community,Dalang Street
,Longhua District, ShenZhen,
China
 
Attention: Jerry Huang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A4J2-SERPRO
Name of Grantee:  ShenZhen AZW Technology CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mini PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0288  
CC 15E 5745.0  -  5825.0 0.0319  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TGX7hFGwpDxXxj4kSZhM3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ShenZhen AZW Technology CO.,LTD.
701, Building 8, Hengda Shishang Huigu, next to Fulong Road, Shanghenglang Community,Dalang Street
,Longhua District, ShenZhen,
China 		  Date of Grant: 01/09/2025

Application Dated: 01/09/2025
 
Attention: Jerry Huang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A4J2-SERPRO
Name of Grantee:  ShenZhen AZW Technology CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mini PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0288  
CC 15E 5745.0  -  5825.0 0.0319  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application fxHGWMeMcNPkPPMFDOmLdQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 01/09/2025

Application Dated: 01/09/2025
ShenZhen AZW Technology CO.,LTD.
701, Building 8, Hengda Shishang Huigu, next to
Fulong Road, Shanghenglang Community,Dalang Street
,Longhua District, ShenZhen,
China
 
Attention: Jerry Huang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A4J2-SERPRO
Name of Grantee:  ShenZhen AZW Technology CO.,LTD.
Equipment Class: Digital Transmission System
Notes: Mini PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0023  
CC 15C 2412.0  -  2462.0 0.0303  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fxHGWMeMcNPkPPMFDOmLdQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ShenZhen AZW Technology CO.,LTD.
701, Building 8, Hengda Shishang Huigu, next to Fulong Road, Shanghenglang Community,Dalang Street
,Longhua District, ShenZhen,
China 		  Date of Grant: 01/09/2025

Application Dated: 01/09/2025
 
Attention: Jerry Huang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A4J2-SERPRO
Name of Grantee:  ShenZhen AZW Technology CO.,LTD.
Equipment Class: Digital Transmission System
Notes: Mini PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0023  
CC 15C 2412.0  -  2462.0 0.0303  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: