FCC ID 2A4J2-EQI

Mini PC

by ShenZhen AZW Technology CO.,LTD.

Grantee Code: 2A4J2   Product Code: EQI
Latest application date: 2025-01-13

FCC ID Device Details

FCC ID2A4J2-EQI
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A4J2
Product CodeEQI
Applicant BusinessShenZhen AZW Technology CO.,LTD. 🇨🇳
Equipment ClassMini PC
Test FirmShenzhen ETR Standard Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2025-01-13
5180-5240 MHzOriginal Equipment2025-01-13

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2025-07-12PDF 3.6 MB
Internal PhotosInternal Photos2025-07-12PDF 730.7 KB
Internal photosInternal Photos2025-07-12PDF 2.5 MB
Internal photos Metadata onlyInternal Photos2025-07-12PDF 730.7 KB
EXTERNAL PHOTOSExternal Photos2025-07-12PDF 730.7 KB
External PhotosExternal Photos2025-07-12PDF 730.7 KB
Label and label locationID Label/Location Info2025-01-13PDF 384.6 KB
Label&LocationID Label/Location Info2025-01-13PDF 384.6 KB
Test photosTest Setup Photos2025-07-12PDF 238.5 KB
5G WIFI-Part 1Test Report2025-01-13PDF 5.7 MB
ANTTest Report2025-01-13PDF 1.5 MB
Ant reportTest Report2025-01-13PDF 1.5 MB
RSS 247 5G WIFI -Part 2Test Report2025-01-13PDF 5.5 MB
Test Report RSS 247 BLETest Report2025-01-13PDF 2.4 MB
Test Report RSS 247 WIFITest Report2025-01-13PDF 5.9 MB
2.911 d 5 i CertificiationApplicantv1.3Attestation Statements2025-01-13PDF 407 KB
2.911 (d)(5)(i) Certification Equipment Type v1.2Attestation Statements2025-01-13PDF 407 KB
2.911 (d)(5)(ii) Certificiation Applicant v1.3Attestation Statements2025-01-13PDF 389.6 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2025-01-13PDF 389.6 KB
2.911 (d)(7) US Agent for Service of Process v1.4Attestation Statements2025-01-13PDF 158 KB
2.911 (d)(7)USAgentforServiceofProcessv1.2Attestation Statements2025-01-13PDF 158 KB
AGent Authorization Rev 1.0Cover Letter(s)2025-01-13PDF 13 KB
Agent Authorization Rev 1.0Cover Letter(s)2025-01-13PDF 13 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2025-01-13PDF 220.2 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2025-01-13PDF 161.1 KB
family models declaration letterCover Letter(s)2025-01-13PDF 215.3 KB
MPERF Exposure Info2025-01-13PDF 165.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 363.9 KB
Block diagram Metadata onlyBlock DiagramPDF 363.9 KB
SCH Metadata onlySchematicsPDF 1,007.3 KB
OP Metadata onlyOperational DescriptionPDF 810.7 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security Info.PDF 435.8 KB

Application Information

Application IDu0oNa9Vj1eZ/iK7aVp5kYw==
Final Action Date2025-01-13
Application PurposeOriginal Equipment
Applicant FRN0031976178
ModelEQI
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMini PC
Responsible PartyJerry Huang, 13528413123@139.com , 13528413123
Technical ContactShenZhen AZW Technology CO.,LTD., 13528413123@139.com
Test FirmSmith Chen, Shenzhen ETR Standard Technology Co., Ltd., etr802@etrtest.com , +86 755-85259392
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/12/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
u0oNa9Vj1eZ/iK7aVp5kYw==2025-01-13Original Equipment
bIc3ZS2RBCqtVGphAB38qw==2025-01-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002515CCC
2412-2462 MHz0.0315CCC
5180-5240 MHz0.021615ECC
5745-5825 MHz0.034115ECC

Grants

TCB Grant - Application u0oNa9Vj1eZ/iK7aVp5kYw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/13/2025

Application Dated: 01/13/2025
ShenZhen AZW Technology CO.,LTD.
701, Building 8, Hengda Shishang Huigu, next to
Fulong Road, Shanghenglang Community,Dalang Street
,Longhua District, ShenZhen,
China
 
Attention: Jerry Huang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A4J2-EQI
Name of Grantee:  ShenZhen AZW Technology CO.,LTD.
Equipment Class: Digital Transmission System
Notes: Mini PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0025  
CC 15C 2412.0  -  2462.0 0.03  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application u0oNa9Vj1eZ/iK7aVp5kYw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen AZW Technology CO.,LTD.
701, Building 8, Hengda Shishang Huigu, next to Fulong Road, Shanghenglang Community,Dalang Street
,Longhua District, ShenZhen,
China
  Date of Grant: 01/13/2025

Application Dated: 01/13/2025
 
Attention: Jerry Huang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A4J2-EQI
Name of Grantee:  ShenZhen AZW Technology CO.,LTD.
Equipment Class: Digital Transmission System
Notes: Mini PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0025  
CC 15C 2412.0  -  2462.0 0.03  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bIc3ZS2RBCqtVGphAB38qw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/13/2025

Application Dated: 01/13/2025
ShenZhen AZW Technology CO.,LTD.
701, Building 8, Hengda Shishang Huigu, next to
Fulong Road, Shanghenglang Community,Dalang Street
,Longhua District, ShenZhen,
China
 
Attention: Jerry Huang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A4J2-EQI
Name of Grantee:  ShenZhen AZW Technology CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mini PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0216  
CC 15E 5745.0  -  5825.0 0.0341  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application bIc3ZS2RBCqtVGphAB38qw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen AZW Technology CO.,LTD.
701, Building 8, Hengda Shishang Huigu, next to Fulong Road, Shanghenglang Community,Dalang Street
,Longhua District, ShenZhen,
China
  Date of Grant: 01/13/2025

Application Dated: 01/13/2025
 
Attention: Jerry Huang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A4J2-EQI
Name of Grantee:  ShenZhen AZW Technology CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mini PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0216  
CC 15E 5745.0  -  5825.0 0.0341  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: