FCC ID 2A4K9-W2
Projector
by YABER TECHNOLOGIES CO.,LIMITED
Grantee Code: 2A4K9 Product Code: W2
Latest application date: 2022-02-23
FCC ID Device Details
| FCC ID | 2A4K9-W2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A4K9 |
| Product Code | W2 |
| Applicant Business | YABER TECHNOLOGIES CO.,LIMITED 🇨🇳 |
| Equipment Class | Projector |
| Test Firm | SHENZHEN TONGCE TESTING LAB |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AYQZ-W2 Grant Date: 02/07/2021 | 2022-02-23 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AYQZ-W2 Grant Date: 02/07/2021 | 2022-02-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photo | External Photos | 2022-02-23 | PDF 707.3 KB |
| Label and location | ID Label/Location Info | 2022-02-23 | PDF 119.5 KB |
| FCC Authorization from Original Grantee for ID change V1.1 | Cover Letter(s) | 2022-02-23 | PDF 214.8 KB |
| FCC Request for change in ID Rev 2.1 | Cover Letter(s) | 2022-02-23 | PDF 162.5 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-02-23 | PDF 58.9 KB |
| Model Difference | Cover Letter(s) | 2022-02-23 | PDF 147.1 KB |
| Model Statement | Cover Letter(s) | 2022-02-23 | PDF 147.1 KB |
Application Information
| Application ID | TB1O48hTMWxtmDX+ZA6WUQ== |
|---|---|
| Final Action Date | 2022-02-23 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2AYQZ-W2 Grant Date: 02/07/2021 |
| Applicant FRN | 0031977390 |
| Model | W2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Projector |
| Responsible Party | George wang, Certification Engineer, George_puture@aliyun.com  , 15012496795 |
| Technical Contact | YABER TECHNOLOGIES CO., LIMITED, George_puture@aliyun.com |
| Test Firm | Beryl Zhao, SHENZHEN TONGCE TESTING LAB, berylzhao@tct-lab.com  , +8675527208735 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| TB1O48hTMWxtmDX+ZA6WUQ== | 2022-02-23 | Change in identification of presently authorized equipment. Original FCC ID: 2AYQZ-W2 Grant Date: 02/07/2021 |
| FY/AJxEcRiziLKtbMUDlEQ== | 2022-02-23 | Change in identification of presently authorized equipment. Original FCC ID: 2AYQZ-W2 Grant Date: 02/07/2021 |
Equipment Authorization
Grants
TCB Grant - Application TB1O48hTMWxtmDX+ZA6WUQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 02/23/2022 Application Dated: 02/23/2022 |
| YABER TECHNOLOGIES CO.,LIMITED |
| Room 406,4 Floor,B Building,BanTian International |
| Center,HuanCheng South Road,BanTian Street, |
| LongGang District,Shenzhen, 518000 China |
| Attention: George wang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A4K9-W2 |
| Name of Grantee: | YABER TECHNOLOGIES CO.,LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.038371 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.019724 |
| Power output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TB1O48hTMWxtmDX+ZA6WUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
YABER TECHNOLOGIES CO.,LIMITED Room 406,4 Floor,B Building,BanTian International Center,HuanCheng South Road,BanTian Street, LongGang District,Shenzhen, 518000 China |
Date of Grant: 02/23/2022 Application Dated: 02/23/2022 |
| Attention: George wang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A4K9-W2 |
| Name of Grantee: | YABER TECHNOLOGIES CO.,LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.038371 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.019724 |
| Power output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 02/23/2022 Application Dated: 02/23/2022 |
| YABER TECHNOLOGIES CO.,LIMITED |
| Room 406,4 Floor,B Building,BanTian International |
| Center,HuanCheng South Road,BanTian Street, |
| LongGang District,Shenzhen, 518000 China |
| Attention: George wang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A4K9-W2 |
| Name of Grantee: | YABER TECHNOLOGIES CO.,LIMITED |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00069 |
| Power output listed is conducted.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Power output listed is conducted.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application FY/AJxEcRiziLKtbMUDlEQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
YABER TECHNOLOGIES CO.,LIMITED Room 406,4 Floor,B Building,BanTian International Center,HuanCheng South Road,BanTian Street, LongGang District,Shenzhen, 518000 China |
Date of Grant: 02/23/2022 Application Dated: 02/23/2022 |
| Attention: George wang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A4K9-W2 |
| Name of Grantee: | YABER TECHNOLOGIES CO.,LIMITED |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00069 |
| Power output listed is conducted.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Power output listed is conducted.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |