FCC ID 2A54Y-X1MAX

Projector

by Shenzhen TFIRETEK Technology Co., Ltd.

Grantee Code: 2A54Y   Product Code: X1MAX
Latest application date: 2023-11-28

FCC ID Device Details

FCC ID2A54Y-X1MAX
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A54Y
Product CodeX1MAX
Applicant BusinessShenzhen TFIRETEK Technology Co., Ltd. 🇨🇳
Equipment ClassProjector
Test FirmShenzhen GUOREN Certification Technology Service C

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2023-11-28
2402-2480 MHzOriginal Equipment2023-11-28
2402-2480 MHzOriginal Equipment2023-11-28

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-11-28PDF 3.7 MB
Internal PhotosInternal Photos2023-11-28PDF 1.8 MB
External PhotosExternal Photos2023-11-28PDF 3.4 MB
label and locationID Label/Location Info2023-11-28PDF 659.4 KB
Product differences statementBlock Diagram2023-11-28PDF 91.6 KB
Test Setup PhotosTest Setup Photos2023-11-28PDF 2.2 MB
test ReportTest Report2023-11-28PDF 5.6 MB
test ReportTest Report2023-11-28PDF 5.6 MB
test ReportTest Report2023-11-28PDF 5.6 MB
Cover LetterAttestation Statements2023-11-28PDF 125.5 KB
U.S. Agent Letter of AttestationAttestation Statements2023-11-28PDF 296.5 KB
USA AgentAttestation Statements2023-11-28PDF 296.5 KB
cover letterAttestation Statements2023-11-28PDF 125.5 KB
ANT ReportCover Letter(s)2023-11-28PDF 564.9 KB
ANT ReportCover Letter(s)2023-11-28PDF 418.5 KB
Agent Authorization Letter TemplateCover Letter(s)2023-11-28PDF 173.1 KB
FCC Short & Long Term Confidentiality RequestCover Letter(s)2023-11-28PDF 103.9 KB
FCC Short & Long Term Confidentiality Request-updateCover Letter(s)2023-11-28PDF 103.9 KB
FCC Software Configuration Control DeclarationCover Letter(s)2023-11-28PDF 92.4 KB
Product differences statementCover Letter(s)2023-11-28PDF 91.6 KB
RF Exposure InfoRF Exposure Info2023-11-28PDF 158.5 KB
BLOCK Metadata onlyBlock DiagramPDF 715.6 KB
SCH Metadata onlySchematicsPDF 2.3 MB
OPS Metadata onlyOperational DescriptionPDF 84.7 KB
FCC Software Configuration Control Declaration Metadata onlySDR Software/Security InfPDF 123 KB
Software Security Requirements for UNII devices Metadata onlySDR Software/Security InfPDF 123 KB
BLOCK Metadata onlyParts List/Tune Up InfoPDF 715.6 KB

Application Information

Application IDwgZ8PEFa5ClRgdHM12heEA==
Final Action Date2023-11-28
Application PurposeOriginal Equipment
Applicant FRN0032183766
ModelX1MAX
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionProjector
Responsible PartyWei Chunhui, manager, iforeseeyou@outlook.com , +0086 15705957686
Technical ContactShenzhen TFIRETEK Technology Co., Ltd., iforeseeyou@outlook.com
Test FirmSam Wang, Shenzhen GUOREN Certification Technology Service C, sam.wang@grcert.com , +86 755 23408306
TCB Emailanezam@qai.org
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
wgZ8PEFa5ClRgdHM12heEA==2023-11-28Original Equipment
qMtcoZQoPOjloV7R77c08A==2023-11-28Original Equipment
ML3Ksz9N5tb2h4EdRc6U9w==2023-11-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002515CCC
2402-2480 MHz0.007400015CCC
2412-2462 MHz0.08315CCC, MO
5180-5240 MHz0.0515ECC, MO
5745-5825 MHz0.05915ECC, MO

Grants

TCB Grant - Application wgZ8PEFa5ClRgdHM12heEA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 11/28/2023

Application Dated: 11/27/2023
Shenzhen TFIRETEK Technology Co., Ltd.
Floor 2, Building A, Queshan Guanghao
Industrial Park, Taoyuan Community,
Dalang Street, Longhua District, Shenzhen,
China
 
Attention: Wei Chunhui , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A54Y-X1MAX
Name of Grantee:  Shenzhen TFIRETEK Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  
CC MO 15E 5745.0  -  5825.0 0.059  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application wgZ8PEFa5ClRgdHM12heEA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen TFIRETEK Technology Co., Ltd.
Floor 2, Building A, Queshan Guanghao Industrial Park, Taoyuan Community,
Dalang Street, Longhua District, Shenzhen,
China
  Date of Grant: 11/28/2023

Application Dated: 11/27/2023
 
Attention: Wei Chunhui , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A54Y-X1MAX
Name of Grantee:  Shenzhen TFIRETEK Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  
CC MO 15E 5745.0  -  5825.0 0.059  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application qMtcoZQoPOjloV7R77c08A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 11/28/2023

Application Dated: 11/27/2023
Shenzhen TFIRETEK Technology Co., Ltd.
Floor 2, Building A, Queshan Guanghao
Industrial Park, Taoyuan Community,
Dalang Street, Longhua District, Shenzhen,
China
 
Attention: Wei Chunhui , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A54Y-X1MAX
Name of Grantee:  Shenzhen TFIRETEK Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0074  

Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qMtcoZQoPOjloV7R77c08A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen TFIRETEK Technology Co., Ltd.
Floor 2, Building A, Queshan Guanghao Industrial Park, Taoyuan Community,
Dalang Street, Longhua District, Shenzhen,
China
  Date of Grant: 11/28/2023

Application Dated: 11/27/2023
 
Attention: Wei Chunhui , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A54Y-X1MAX
Name of Grantee:  Shenzhen TFIRETEK Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0074  

Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ML3Ksz9N5tb2h4EdRc6U9w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 11/28/2023

Application Dated: 11/27/2023
Shenzhen TFIRETEK Technology Co., Ltd.
Floor 2, Building A, Queshan Guanghao
Industrial Park, Taoyuan Community,
Dalang Street, Longhua District, Shenzhen,
China
 
Attention: Wei Chunhui , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A54Y-X1MAX
Name of Grantee:  Shenzhen TFIRETEK Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0025  
CC MO 15C 2412.0  -  2462.0 0.083  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ML3Ksz9N5tb2h4EdRc6U9w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen TFIRETEK Technology Co., Ltd.
Floor 2, Building A, Queshan Guanghao Industrial Park, Taoyuan Community,
Dalang Street, Longhua District, Shenzhen,
China
  Date of Grant: 11/28/2023

Application Dated: 11/27/2023
 
Attention: Wei Chunhui , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A54Y-X1MAX
Name of Grantee:  Shenzhen TFIRETEK Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0025  
CC MO 15C 2412.0  -  2462.0 0.083  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: