FCC ID 2A5HJ-AXG1800

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024

Date of Grant: 01/15/2024 Application Dated: 01/15/2024

Express Technologies Limited

Mill Mall, Suite 6

Wickhams Cay 1

Road Town, Tortola, Virgin Islands (British)

Attention: David Gilbert

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2A5HJ-AXG1800
Name of Grantee:	Express Technologies Limited
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Aircove Go

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.456
CC MO	15E	5190.0  -  5230.0	0.4797
CC MO	15E	5210.0  -  5210.0	0.4467
CC MO ND	15E	5260.0  -  5320.0	0.1607
CC MO ND	15E	5270.0  -  5310.0	0.1746
CC MO ND	15E	5290.0  -  5290.0	0.13
CC MO ND	15E	5500.0  -  5700.0	0.1496
CC MO ND	15E	5510.0  -  5670.0	0.1671
CC MO ND	15E	5530.0  -  5610.0	0.1371
CC MO	15E	5745.0  -  5825.0	0.4819
CC MO	15E	5755.0  -  5795.0	0.4457
CC MO	15E	5775.0  -  5775.0	0.2972

Power output listed is conducted. Device is an 802.11a/n/ac/ax master device containing a 2 x 2 MIMO configuration, enabled for 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20MHz, 40MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Express Technologies Limited Mill Mall, Suite 6 Wickhams Cay 1 Road Town, Tortola, Virgin Islands (British)

Date of Grant: 01/15/2024 Application Dated: 01/15/2024

Attention: David Gilbert

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2A5HJ-AXG1800
Name of Grantee:	Express Technologies Limited
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Aircove Go
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.456
CC MO	15E	5190.0  -  5230.0	0.4797
CC MO	15E	5210.0  -  5210.0	0.4467
CC MO ND	15E	5260.0  -  5320.0	0.1607
CC MO ND	15E	5270.0  -  5310.0	0.1746
CC MO ND	15E	5290.0  -  5290.0	0.13
CC MO ND	15E	5500.0  -  5700.0	0.1496
CC MO ND	15E	5510.0  -  5670.0	0.1671
CC MO ND	15E	5530.0  -  5610.0	0.1371
CC MO	15E	5745.0  -  5825.0	0.4819
CC MO	15E	5755.0  -  5795.0	0.4457
CC MO	15E	5775.0  -  5775.0	0.2972

Power output listed is conducted. Device is an 802.11a/n/ac/ax master device containing a 2 x 2 MIMO configuration, enabled for 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20MHz, 40MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 4n0e86jdiXkKnihm1sxWUg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024

Date of Grant: 01/15/2024 Application Dated: 01/15/2024

Express Technologies Limited

Mill Mall, Suite 6

Wickhams Cay 1

Road Town, Tortola, Virgin Islands (British)

Attention: David Gilbert

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2A5HJ-AXG1800
Name of Grantee:	Express Technologies Limited
Equipment Class:	Digital Transmission System
Notes:	Aircove Go

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.4426
CC MO	15C	2422.0  -  2452.0	0.4207

Power output listed is conducted. Device is an 802.11b/g/n/ax master device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20MHz and 40MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Express Technologies Limited Mill Mall, Suite 6 Wickhams Cay 1 Road Town, Tortola, Virgin Islands (British)

Date of Grant: 01/15/2024 Application Dated: 01/15/2024

Attention: David Gilbert

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2A5HJ-AXG1800
Name of Grantee:	Express Technologies Limited
Equipment Class:	Digital Transmission System
Notes:	Aircove Go
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.4426
CC MO	15C	2422.0  -  2452.0	0.4207

Power output listed is conducted. Device is an 802.11b/g/n/ax master device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device only has 20MHz and 40MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: